diff options
Diffstat (limited to 'drivers/scsi/mpt2sas')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2.h | 17 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 193 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_init.h | 17 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 119 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_scsih.c | 7 |
5 files changed, 308 insertions, 45 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h index dada0a13223f..4b1c2f0350f9 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.14 + * mpi2.h Version: 02.00.15 * * Version History * --------------- @@ -57,6 +57,10 @@ * Added MSI-x index mask and shift for Reply Post Host * Index register. * Added function code for Host Based Discovery Action. + * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL. + * Added defines for product-specific range of message + * function codes, 0xF0 to 0xFF. * -------------------------------------------------------------------------- */ @@ -82,7 +86,7 @@ #define MPI2_VERSION_02_00 (0x0200) /* versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x0E) +#define MPI2_HEADER_VERSION_UNIT (0x0F) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -473,8 +477,6 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION /***************************************************************************** * * Message Functions -* 0x80 -> 0x8F reserved for private message use per product -* * *****************************************************************************/ @@ -506,6 +508,13 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator*/ /* Host Based Discovery Action */ #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) +/* Power Management Control */ +#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) +/* beginning of product-specific range */ +#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) +/* end of product-specific range */ +#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index d4e9d6f8452e..e3728d736d85 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.13 + * mpi2_cnfg.h Version: 02.00.14 * * Version History * --------------- @@ -109,6 +109,18 @@ * Added Ethernet configuration pages. * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. * Added SAS PHY Page 4 structure and defines. + * 02-10-10 02.00.14 Modified the comments for the configuration page + * structures that contain an array of data. The host + * should use the "count" field in the page data (e.g. the + * NumPhys field) to determine the number of valid elements + * in the array. + * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. + * Added PowerManagementCapabilities to IO Unit Page 7. + * Added PortWidthModGroup field to + * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. * -------------------------------------------------------------------------- */ @@ -373,8 +385,9 @@ typedef struct _MPI2_CONFIG_REPLY #define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) #define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) #define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) -#define MPI2_MFGPAGE_DEVID_SAS2208_7 (0x0086) -#define MPI2_MFGPAGE_DEVID_SAS2208_8 (0x0087) +#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) +#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) +#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) /* Manufacturing Page 0 */ @@ -540,7 +553,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_4 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES #define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) @@ -618,7 +631,7 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) @@ -731,7 +744,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. + * one and check the value returned for GPIOCount at runtime. */ #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) @@ -760,7 +773,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 /* * Upper layer code (drivers, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumDmaEngines at runtime. + * one and check the value returned for NumDmaEngines at runtime. */ #ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES #define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) @@ -823,7 +836,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { U8 PCIeWidth; /* 0x06 */ U8 PCIeSpeed; /* 0x07 */ U32 ProcessorState; /* 0x08 */ - U32 Reserved2; /* 0x0C */ + U32 PowerManagementCapabilities; /* 0x0C */ U16 IOCTemperature; /* 0x10 */ U8 IOCTemperatureUnits; /* 0x12 */ U8 IOCSpeed; /* 0x13 */ @@ -831,7 +844,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { } MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t; -#define MPI2_IOUNITPAGE7_PAGEVERSION (0x00) +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x01) /* defines for IO Unit Page 7 PCIeWidth field */ #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) @@ -852,6 +865,14 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { #define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) #define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) +/* defines for IO Unit Page 7 PowerManagementCapabilities field */ +#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) +#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) +#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) + + /* defines for IO Unit Page 7 IOCTemperatureUnits field */ #define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) #define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) @@ -1195,7 +1216,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_3 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES #define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) @@ -1269,7 +1290,7 @@ typedef struct _MPI2_RAIDVOL0_SETTINGS /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. + * one and check the value returned for NumPhysDisks at runtime. */ #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) @@ -1471,7 +1492,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhysDiskPaths at runtime. + * one and check the value returned for NumPhysDiskPaths at runtime. */ #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX #define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) @@ -1633,7 +1654,7 @@ typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT0_PHY_MAX #define MPI2_SAS_IOUNIT0_PHY_MAX (1) @@ -1704,7 +1725,7 @@ typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT1_PHY_MAX #define MPI2_SAS_IOUNIT1_PHY_MAX (1) @@ -1795,7 +1816,7 @@ typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * four and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT4_PHY_MAX #define MPI2_SAS_IOUNIT4_PHY_MAX (4) @@ -1833,7 +1854,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { U8 ControlFlags; /* 0x00 */ - U8 Reserved1; /* 0x01 */ + U8 PortWidthModGroup; /* 0x01 */ U16 InactivityTimerExponent; /* 0x02 */ U8 SATAPartialTimeout; /* 0x04 */ U8 Reserved2; /* 0x05 */ @@ -1853,6 +1874,9 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { #define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) #define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) +/* defines for PortWidthModeGroup field */ +#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF) + /* defines for InactivityTimerExponent field */ #define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) @@ -1874,7 +1898,7 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT5_PHY_MAX #define MPI2_SAS_IOUNIT5_PHY_MAX (1) @@ -1892,7 +1916,132 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t; -#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x00) +#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01) + + +/* SAS IO Unit Page 6 */ + +typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS { + U8 CurrentStatus; /* 0x00 */ + U8 CurrentModulation; /* 0x01 */ + U8 CurrentUtilization; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 Reserved2; /* 0x04 */ +} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + Mpi2SasIOUnit6PortWidthModGroupStatus_t, + MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t; + +/* defines for CurrentStatus field */ +#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00) +#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01) +#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02) +#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03) +#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04) +#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07) + +/* defines for CurrentModulation field */ +#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00) +#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01) +#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02) +#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX +#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U8 NumGroups; /* 0x10 */ + U8 Reserved3; /* 0x11 */ + U16 Reserved4; /* 0x12 */ + MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS + PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_6, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, + Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t; + +#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00) + + +/* SAS IO Unit Page 7 */ + +typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS { + U8 Flags; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U8 Threshold75Pct; /* 0x04 */ + U8 Threshold50Pct; /* 0x05 */ + U8 Threshold25Pct; /* 0x06 */ + U8 Reserved3; /* 0x07 */ +} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + Mpi2SasIOUnit7PortWidthModGroupSettings_t, + MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t; + +/* defines for Flags field */ +#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01) + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX +#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 SamplingInterval; /* 0x08 */ + U8 WindowLength; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U8 NumGroups; /* 0x14 */ + U8 Reserved4; /* 0x15 */ + U16 Reserved5; /* 0x16 */ + MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS + PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_7, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, + Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t; + +#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00) + + +/* SAS IO Unit Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 PowerManagementCapabilities;/* 0x0C */ + U32 Reserved2; /* 0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_8, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8, + Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t; + +#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) + +/* defines for PowerManagementCapabilities field */ +#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100) +#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001) @@ -2182,7 +2331,7 @@ typedef struct _MPI2_SASPHY2_PHY_EVENT { /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhyEvents at runtime. + * one and check the value returned for NumPhyEvents at runtime. */ #ifndef MPI2_SASPHY2_PHY_EVENT_MAX #define MPI2_SASPHY2_PHY_EVENT_MAX (1) @@ -2274,7 +2423,7 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhyEvents at runtime. + * one and check the value returned for NumPhyEvents at runtime. */ #ifndef MPI2_SASPHY3_PHY_EVENT_MAX #define MPI2_SASPHY3_PHY_EVENT_MAX (1) @@ -2385,7 +2534,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumLogEntries at runtime. */ #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES #define MPI2_LOG_0_NUM_LOG_ENTRIES (1) @@ -2435,7 +2584,7 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumElements at runtime. */ #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS #define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h index 220bf65a9216..c4c99dfcb820 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -6,7 +6,7 @@ * Title: MPI SCSI initiator mode messages and structures * Creation Date: June 23, 2006 * - * mpi2_init.h Version: 02.00.08 + * mpi2_init.h Version: 02.00.09 * * Version History * --------------- @@ -31,6 +31,7 @@ * both SCSI IO Error Reply and SCSI Task Management Reply. * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. + * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. * -------------------------------------------------------------------------- */ @@ -57,20 +58,6 @@ typedef struct } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; -/* TBD: I don't think this is needed for MPI2/Gen2 */ -#if 0 -typedef struct -{ - U8 CDB[16]; /* 0x00 */ - U32 DataLength; /* 0x10 */ - U32 PrimaryReferenceTag; /* 0x14 */ - U16 PrimaryApplicationTag; /* 0x18 */ - U16 PrimaryApplicationTagMask; /* 0x1A */ - U32 TransferLength; /* 0x1C */ -} MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16, - Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t; -#endif - typedef union { U8 CDB32[32]; diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h index f18f114922ba..495bedc4d1f7 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -6,7 +6,7 @@ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.13 + * mpi2_ioc.h Version: 02.00.14 * * Version History * --------------- @@ -98,6 +98,9 @@ * (MPI2_FW_HEADER_PID_). * Modified values for SAS ProductID Family * (MPI2_FW_HEADER_PID_FAMILY_). + * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. + * Added PowerManagementControl Request structures and + * defines. * -------------------------------------------------------------------------- */ @@ -469,6 +472,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY #define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) +#define MPI2_EVENT_SAS_QUIESCE (0x0025) /* Log Entry Added Event data */ @@ -895,6 +899,22 @@ typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { * */ +/* SAS Quiesce Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { + U8 ReasonCode; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Reserved3; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_QUIESCE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE, + Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t; + +/* SAS Quiesce Event data ReasonCode values */ +#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) + + /* Host Based Discovery Phy Event data */ typedef struct _MPI2_EVENT_HBD_PHY_SAS { @@ -1006,6 +1026,7 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) /* FWDownload TransactionContext Element */ @@ -1183,7 +1204,6 @@ typedef struct _MPI2_FW_IMAGE_HEADER #define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) #define MPI2_FW_HEADER_PID_PROD_A (0x0000) -#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) #define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) #define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) @@ -1407,5 +1427,100 @@ typedef struct _MPI2_INIT_IMAGE_FOOTER #define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) +/**************************************************************************** +* PowerManagementControl message +****************************************************************************/ + +/* PowerManagementControl Request message */ +typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { + U8 Feature; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 Parameter1; /* 0x0C */ + U8 Parameter2; /* 0x0D */ + U8 Parameter3; /* 0x0E */ + U8 Parameter4; /* 0x0F */ + U32 Reserved5; /* 0x10 */ + U32 Reserved6; /* 0x14 */ +} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, + Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t; + +/* defines for the Feature field */ +#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) +#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) +#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) +#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) +#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) + +/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ +/* Parameter1 contains a PHY number */ +/* Parameter2 indicates power condition action using these defines */ +#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) +#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) +#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) +/* Parameter3 and Parameter4 are reserved */ + +/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION + * Feature */ +/* Parameter1 contains SAS port width modulation group number */ +/* Parameter2 indicates IOC action using these defines */ +#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) +#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) +#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) +/* Parameter3 indicates desired modulation level using these defines */ +#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) +#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) +#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) +#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) +/* Parameter4 is reserved */ + +/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ +/* Parameter1 indicates desired PCIe link speed using these defines */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) +#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) +#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) +/* Parameter2 indicates desired PCIe link width using these defines */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) +/* Parameter3 and Parameter4 are reserved */ + +/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ +/* Parameter1 indicates desired IOC hardware clock speed using these defines */ +#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) +#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) +#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) +#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) +/* Parameter2, Parameter3, and Parameter4 are reserved */ + + +/* PowerManagementControl Reply message */ +typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { + U8 Feature; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY, + Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t; + + #endif diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 9ce225303938..87c686525f07 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -223,9 +223,12 @@ static struct pci_device_id scsih_pci_table[] = { PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6, PCI_ANY_ID, PCI_ANY_ID }, - { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_7, + /* Mustang ~ 2308 */ + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1, PCI_ANY_ID, PCI_ANY_ID }, - { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_8, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3, PCI_ANY_ID, PCI_ANY_ID }, {0} /* Terminating entry */ }; |