summaryrefslogtreecommitdiff
path: root/drivers/scsi/aic7xxx/aic79xx_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aic7xxx/aic79xx_pci.c')
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_pci.c56
1 files changed, 28 insertions, 28 deletions
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index 90a04a37b4f7..14b5f8d0e7f4 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -338,7 +338,7 @@ ahd_pci_config(struct ahd_softc *ahd, const struct ahd_pci_identity *entry)
*/
if ((ahd->flags & (AHD_39BIT_ADDRESSING|AHD_64BIT_ADDRESSING)) != 0) {
if (bootverbose)
- printf("%s: Enabling 39Bit Addressing\n",
+ printk("%s: Enabling 39Bit Addressing\n",
ahd_name(ahd));
devconfig = ahd_pci_read_config(ahd->dev_softc,
DEVCONFIG, /*bytes*/4);
@@ -528,7 +528,7 @@ ahd_check_extport(struct ahd_softc *ahd)
* Fetch VPD for this function and parse it.
*/
if (bootverbose)
- printf("%s: Reading VPD from SEEPROM...",
+ printk("%s: Reading VPD from SEEPROM...",
ahd_name(ahd));
/* Address is always in units of 16bit words */
@@ -541,12 +541,12 @@ ahd_check_extport(struct ahd_softc *ahd)
if (error == 0)
error = ahd_parse_vpddata(ahd, &vpd);
if (bootverbose)
- printf("%s: VPD parsing %s\n",
+ printk("%s: VPD parsing %s\n",
ahd_name(ahd),
error == 0 ? "successful" : "failed");
if (bootverbose)
- printf("%s: Reading SEEPROM...", ahd_name(ahd));
+ printk("%s: Reading SEEPROM...", ahd_name(ahd));
/* Address is always in units of 16bit words */
start_addr = (sizeof(*sc) / 2) * (ahd->channel - 'A');
@@ -556,16 +556,16 @@ ahd_check_extport(struct ahd_softc *ahd)
/*bytestream*/FALSE);
if (error != 0) {
- printf("Unable to read SEEPROM\n");
+ printk("Unable to read SEEPROM\n");
have_seeprom = 0;
} else {
have_seeprom = ahd_verify_cksum(sc);
if (bootverbose) {
if (have_seeprom == 0)
- printf ("checksum error\n");
+ printk ("checksum error\n");
else
- printf ("done.\n");
+ printk ("done.\n");
}
}
ahd_release_seeprom(ahd);
@@ -615,21 +615,21 @@ ahd_check_extport(struct ahd_softc *ahd)
uint16_t *sc_data;
int i;
- printf("%s: Seeprom Contents:", ahd_name(ahd));
+ printk("%s: Seeprom Contents:", ahd_name(ahd));
sc_data = (uint16_t *)sc;
for (i = 0; i < (sizeof(*sc)); i += 2)
- printf("\n\t0x%.4x", sc_data[i]);
- printf("\n");
+ printk("\n\t0x%.4x", sc_data[i]);
+ printk("\n");
}
#endif
if (!have_seeprom) {
if (bootverbose)
- printf("%s: No SEEPROM available.\n", ahd_name(ahd));
+ printk("%s: No SEEPROM available.\n", ahd_name(ahd));
ahd->flags |= AHD_USEDEFAULTS;
error = ahd_default_config(ahd);
adapter_control = CFAUTOTERM|CFSEAUTOTERM;
- free(ahd->seep_config, M_DEVBUF);
+ kfree(ahd->seep_config);
ahd->seep_config = NULL;
} else {
error = ahd_parse_cfgdata(ahd, sc);
@@ -656,7 +656,7 @@ ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control)
if ((ahd->flags & AHD_STPWLEVEL_A) != 0)
devconfig |= STPWLEVEL;
if (bootverbose)
- printf("%s: STPWLEVEL is %s\n",
+ printk("%s: STPWLEVEL is %s\n",
ahd_name(ahd), (devconfig & STPWLEVEL) ? "on" : "off");
ahd_pci_write_config(ahd->dev_softc, DEVCONFIG, devconfig, /*bytes*/4);
@@ -671,7 +671,7 @@ ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control)
error = ahd_read_flexport(ahd, FLXADDR_TERMCTL, &termctl);
if ((adapter_control & CFAUTOTERM) == 0) {
if (bootverbose)
- printf("%s: Manual Primary Termination\n",
+ printk("%s: Manual Primary Termination\n",
ahd_name(ahd));
termctl &= ~(FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH);
if ((adapter_control & CFSTERM) != 0)
@@ -679,14 +679,14 @@ ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control)
if ((adapter_control & CFWSTERM) != 0)
termctl |= FLX_TERMCTL_ENPRIHIGH;
} else if (error != 0) {
- printf("%s: Primary Auto-Term Sensing failed! "
+ printk("%s: Primary Auto-Term Sensing failed! "
"Using Defaults.\n", ahd_name(ahd));
termctl = FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH;
}
if ((adapter_control & CFSEAUTOTERM) == 0) {
if (bootverbose)
- printf("%s: Manual Secondary Termination\n",
+ printk("%s: Manual Secondary Termination\n",
ahd_name(ahd));
termctl &= ~(FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH);
if ((adapter_control & CFSELOWTERM) != 0)
@@ -694,7 +694,7 @@ ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control)
if ((adapter_control & CFSEHIGHTERM) != 0)
termctl |= FLX_TERMCTL_ENSECHIGH;
} else if (error != 0) {
- printf("%s: Secondary Auto-Term Sensing failed! "
+ printk("%s: Secondary Auto-Term Sensing failed! "
"Using Defaults.\n", ahd_name(ahd));
termctl |= FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH;
}
@@ -714,22 +714,22 @@ ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control)
error = ahd_write_flexport(ahd, FLXADDR_TERMCTL, termctl);
if (error != 0) {
- printf("%s: Unable to set termination settings!\n",
+ printk("%s: Unable to set termination settings!\n",
ahd_name(ahd));
} else if (bootverbose) {
- printf("%s: Primary High byte termination %sabled\n",
+ printk("%s: Primary High byte termination %sabled\n",
ahd_name(ahd),
(termctl & FLX_TERMCTL_ENPRIHIGH) ? "En" : "Dis");
- printf("%s: Primary Low byte termination %sabled\n",
+ printk("%s: Primary Low byte termination %sabled\n",
ahd_name(ahd),
(termctl & FLX_TERMCTL_ENPRILOW) ? "En" : "Dis");
- printf("%s: Secondary High byte termination %sabled\n",
+ printk("%s: Secondary High byte termination %sabled\n",
ahd_name(ahd),
(termctl & FLX_TERMCTL_ENSECHIGH) ? "En" : "Dis");
- printf("%s: Secondary Low byte termination %sabled\n",
+ printk("%s: Secondary Low byte termination %sabled\n",
ahd_name(ahd),
(termctl & FLX_TERMCTL_ENSECLOW) ? "En" : "Dis");
}
@@ -805,7 +805,7 @@ ahd_pci_intr(struct ahd_softc *ahd)
if ((intstat & PCIINT) == 0)
return;
- printf("%s: PCI error Interrupt\n", ahd_name(ahd));
+ printk("%s: PCI error Interrupt\n", ahd_name(ahd));
saved_modes = ahd_save_modes(ahd);
ahd_dump_card_state(ahd);
ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
@@ -832,7 +832,7 @@ ahd_pci_intr(struct ahd_softc *ahd)
s = pci_status_strings[bit];
if (i == 7/*TARG*/ && bit == 3)
s = "%s: Signaled Target Abort\n";
- printf(s, ahd_name(ahd), pci_status_source[i]);
+ printk(s, ahd_name(ahd), pci_status_source[i]);
}
}
}
@@ -862,7 +862,7 @@ ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat)
*/
pcix_status = ahd_pci_read_config(ahd->dev_softc, PCIXR_STATUS,
/*bytes*/2);
- printf("%s: PCI Split Interrupt - PCI-X status = 0x%x\n",
+ printk("%s: PCI Split Interrupt - PCI-X status = 0x%x\n",
ahd_name(ahd), pcix_status);
saved_modes = ahd_save_modes(ahd);
for (i = 0; i < 4; i++) {
@@ -891,7 +891,7 @@ ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat)
static const char *s;
s = split_status_strings[bit];
- printf(s, ahd_name(ahd),
+ printk(s, ahd_name(ahd),
split_status_source[i]);
}
@@ -902,7 +902,7 @@ ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat)
static const char *s;
s = split_status_strings[bit];
- printf(s, ahd_name(ahd), "SG");
+ printk(s, ahd_name(ahd), "SG");
}
}
}
@@ -950,7 +950,7 @@ ahd_aic790X_setup(struct ahd_softc *ahd)
pci = ahd->dev_softc;
rev = ahd_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
if (rev < ID_AIC7902_PCI_REV_A4) {
- printf("%s: Unable to attach to unsupported chip revision %d\n",
+ printk("%s: Unable to attach to unsupported chip revision %d\n",
ahd_name(ahd), rev);
ahd_pci_write_config(pci, PCIR_COMMAND, 0, /*bytes*/2);
return (ENXIO);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 16:43:16 +0000