diff options
Diffstat (limited to 'drivers/s390/cio/device_ops.c')
| -rw-r--r-- | drivers/s390/cio/device_ops.c | 72 |
1 files changed, 32 insertions, 40 deletions
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index 1caf6a398760..75ce12a24dc2 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -159,7 +159,7 @@ int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm) } /** - * ccw_device_start_key() - start a s390 channel program with key + * ccw_device_start_timeout_key() - start a s390 channel program with timeout and key * @cdev: target ccw device * @cpa: logical start address of channel program * @intparm: user specific interruption parameter; will be presented back to @@ -170,10 +170,15 @@ int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm) * @key: storage key to be used for the I/O * @flags: additional flags; defines the action to be performed for I/O * processing. + * @expires: timeout value in jiffies * * Start a S/390 channel program. When the interrupt arrives, the * IRQ handler is called, either immediately, delayed (dev-end missing, * or sense required) or never (no IRQ handler registered). + * This function notifies the device driver if the channel program has not + * completed during the time specified by @expires. If a timeout occurs, the + * channel program is terminated via xsch, hsch or csch, and the device's + * interrupt handler will be called with an irb containing ERR_PTR(-%ETIMEDOUT). * Returns: * %0, if the operation was successful; * -%EBUSY, if the device is busy, or status pending; @@ -182,9 +187,9 @@ int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm) * Context: * Interrupts disabled, ccw device lock held */ -int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, - unsigned long intparm, __u8 lpm, __u8 key, - unsigned long flags) +int ccw_device_start_timeout_key(struct ccw_device *cdev, struct ccw1 *cpa, + unsigned long intparm, __u8 lpm, __u8 key, + unsigned long flags, int expires) { struct subchannel *sch; int ret; @@ -224,6 +229,8 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, switch (ret) { case 0: cdev->private->intparm = intparm; + if (expires) + ccw_device_set_timeout(cdev, expires); break; case -EACCES: case -ENODEV: @@ -234,7 +241,7 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, } /** - * ccw_device_start_timeout_key() - start a s390 channel program with timeout and key + * ccw_device_start_key() - start a s390 channel program with key * @cdev: target ccw device * @cpa: logical start address of channel program * @intparm: user specific interruption parameter; will be presented back to @@ -245,15 +252,10 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, * @key: storage key to be used for the I/O * @flags: additional flags; defines the action to be performed for I/O * processing. - * @expires: timeout value in jiffies * * Start a S/390 channel program. When the interrupt arrives, the * IRQ handler is called, either immediately, delayed (dev-end missing, * or sense required) or never (no IRQ handler registered). - * This function notifies the device driver if the channel program has not - * completed during the time specified by @expires. If a timeout occurs, the - * channel program is terminated via xsch, hsch or csch, and the device's - * interrupt handler will be called with an irb containing ERR_PTR(-%ETIMEDOUT). * Returns: * %0, if the operation was successful; * -%EBUSY, if the device is busy, or status pending; @@ -262,19 +264,12 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, * Context: * Interrupts disabled, ccw device lock held */ -int ccw_device_start_timeout_key(struct ccw_device *cdev, struct ccw1 *cpa, - unsigned long intparm, __u8 lpm, __u8 key, - unsigned long flags, int expires) +int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, + unsigned long intparm, __u8 lpm, __u8 key, + unsigned long flags) { - int ret; - - if (!cdev) - return -ENODEV; - ccw_device_set_timeout(cdev, expires); - ret = ccw_device_start_key(cdev, cpa, intparm, lpm, key, flags); - if (ret != 0) - ccw_device_set_timeout(cdev, 0); - return ret; + return ccw_device_start_timeout_key(cdev, cpa, intparm, lpm, key, + flags, 0); } /** @@ -489,18 +484,20 @@ void ccw_device_get_id(struct ccw_device *cdev, struct ccw_dev_id *dev_id) EXPORT_SYMBOL(ccw_device_get_id); /** - * ccw_device_tm_start_key() - perform start function + * ccw_device_tm_start_timeout_key() - perform start function * @cdev: ccw device on which to perform the start function * @tcw: transport-command word to be started * @intparm: user defined parameter to be passed to the interrupt handler * @lpm: mask of paths to use * @key: storage key to use for storage access + * @expires: time span in jiffies after which to abort request * * Start the tcw on the given ccw device. Return zero on success, non-zero * otherwise. */ -int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, - unsigned long intparm, u8 lpm, u8 key) +int ccw_device_tm_start_timeout_key(struct ccw_device *cdev, struct tcw *tcw, + unsigned long intparm, u8 lpm, u8 key, + int expires) { struct subchannel *sch; int rc; @@ -527,37 +524,32 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, return -EACCES; } rc = cio_tm_start_key(sch, tcw, lpm, key); - if (rc == 0) + if (rc == 0) { cdev->private->intparm = intparm; + if (expires) + ccw_device_set_timeout(cdev, expires); + } return rc; } -EXPORT_SYMBOL(ccw_device_tm_start_key); +EXPORT_SYMBOL(ccw_device_tm_start_timeout_key); /** - * ccw_device_tm_start_timeout_key() - perform start function + * ccw_device_tm_start_key() - perform start function * @cdev: ccw device on which to perform the start function * @tcw: transport-command word to be started * @intparm: user defined parameter to be passed to the interrupt handler * @lpm: mask of paths to use * @key: storage key to use for storage access - * @expires: time span in jiffies after which to abort request * * Start the tcw on the given ccw device. Return zero on success, non-zero * otherwise. */ -int ccw_device_tm_start_timeout_key(struct ccw_device *cdev, struct tcw *tcw, - unsigned long intparm, u8 lpm, u8 key, - int expires) +int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, + unsigned long intparm, u8 lpm, u8 key) { - int ret; - - ccw_device_set_timeout(cdev, expires); - ret = ccw_device_tm_start_key(cdev, tcw, intparm, lpm, key); - if (ret != 0) - ccw_device_set_timeout(cdev, 0); - return ret; + return ccw_device_tm_start_timeout_key(cdev, tcw, intparm, lpm, key, 0); } -EXPORT_SYMBOL(ccw_device_tm_start_timeout_key); +EXPORT_SYMBOL(ccw_device_tm_start_key); /** * ccw_device_tm_start() - perform start function |