diff options
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/tegra/xusb-tegra186.c | 550 |
1 files changed, 549 insertions, 1 deletions
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c index 5d64f69b39a9..ae3915ed9fef 100644 --- a/drivers/phy/tegra/xusb-tegra186.c +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2016-2019, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2016-2020, NVIDIA CORPORATION. All rights reserved. */ #include <linux/delay.h> @@ -113,6 +113,117 @@ #define ID_OVERRIDE_FLOATING ID_OVERRIDE(8) #define ID_OVERRIDE_GROUNDED ID_OVERRIDE(0) +/* XUSB AO registers */ +#define XUSB_AO_USB_DEBOUNCE_DEL (0x4) +#define UHSIC_LINE_DEB_CNT(x) (((x) & 0xf) << 4) +#define UTMIP_LINE_DEB_CNT(x) ((x) & 0xf) + +#define XUSB_AO_UTMIP_TRIGGERS(x) (0x40 + (x) * 4) +#define CLR_WALK_PTR BIT(0) +#define CAP_CFG BIT(1) +#define CLR_WAKE_ALARM BIT(3) + +#define XUSB_AO_UHSIC_TRIGGERS(x) (0x60 + (x) * 4) +#define HSIC_CLR_WALK_PTR BIT(0) +#define HSIC_CLR_WAKE_ALARM BIT(3) +#define HSIC_CAP_CFG BIT(4) + +#define XUSB_AO_UTMIP_SAVED_STATE(x) (0x70 + (x) * 4) +#define SPEED(x) ((x) & 0x3) +#define UTMI_HS SPEED(0) +#define UTMI_FS SPEED(1) +#define UTMI_LS SPEED(2) +#define UTMI_RST SPEED(3) + +#define XUSB_AO_UHSIC_SAVED_STATE(x) (0x90 + (x) * 4) +#define MODE(x) ((x) & 0x1) +#define MODE_HS MODE(0) +#define MODE_RST MODE(1) + +#define XUSB_AO_UTMIP_SLEEPWALK_CFG(x) (0xd0 + (x) * 4) +#define XUSB_AO_UHSIC_SLEEPWALK_CFG(x) (0xf0 + (x) * 4) +#define FAKE_USBOP_VAL BIT(0) +#define FAKE_USBON_VAL BIT(1) +#define FAKE_USBOP_EN BIT(2) +#define FAKE_USBON_EN BIT(3) +#define FAKE_STROBE_VAL BIT(0) +#define FAKE_DATA_VAL BIT(1) +#define FAKE_STROBE_EN BIT(2) +#define FAKE_DATA_EN BIT(3) +#define WAKE_WALK_EN BIT(14) +#define MASTER_ENABLE BIT(15) +#define LINEVAL_WALK_EN BIT(16) +#define WAKE_VAL(x) (((x) & 0xf) << 17) +#define WAKE_VAL_NONE WAKE_VAL(12) +#define WAKE_VAL_ANY WAKE_VAL(15) +#define WAKE_VAL_DS10 WAKE_VAL(2) +#define LINE_WAKEUP_EN BIT(21) +#define MASTER_CFG_SEL BIT(22) + +#define XUSB_AO_UTMIP_SLEEPWALK(x) (0x100 + (x) * 4) +/* phase A */ +#define USBOP_RPD_A BIT(0) +#define USBON_RPD_A BIT(1) +#define AP_A BIT(4) +#define AN_A BIT(5) +#define HIGHZ_A BIT(6) +/* phase B */ +#define USBOP_RPD_B BIT(8) +#define USBON_RPD_B BIT(9) +#define AP_B BIT(12) +#define AN_B BIT(13) +#define HIGHZ_B BIT(14) +/* phase C */ +#define USBOP_RPD_C BIT(16) +#define USBON_RPD_C BIT(17) +#define AP_C BIT(20) +#define AN_C BIT(21) +#define HIGHZ_C BIT(22) +/* phase D */ +#define USBOP_RPD_D BIT(24) +#define USBON_RPD_D BIT(25) +#define AP_D BIT(28) +#define AN_D BIT(29) +#define HIGHZ_D BIT(30) + +#define XUSB_AO_UHSIC_SLEEPWALK(x) (0x120 + (x) * 4) +/* phase A */ +#define RPD_STROBE_A BIT(0) +#define RPD_DATA0_A BIT(1) +#define RPU_STROBE_A BIT(2) +#define RPU_DATA0_A BIT(3) +/* phase B */ +#define RPD_STROBE_B BIT(8) +#define RPD_DATA0_B BIT(9) +#define RPU_STROBE_B BIT(10) +#define RPU_DATA0_B BIT(11) +/* phase C */ +#define RPD_STROBE_C BIT(16) +#define RPD_DATA0_C BIT(17) +#define RPU_STROBE_C BIT(18) +#define RPU_DATA0_C BIT(19) +/* phase D */ +#define RPD_STROBE_D BIT(24) +#define RPD_DATA0_D BIT(25) +#define RPU_STROBE_D BIT(26) +#define RPU_DATA0_D BIT(27) + +#define XUSB_AO_UTMIP_PAD_CFG(x) (0x130 + (x) * 4) +#define FSLS_USE_XUSB_AO BIT(3) +#define TRK_CTRL_USE_XUSB_AO BIT(4) +#define RPD_CTRL_USE_XUSB_AO BIT(5) +#define RPU_USE_XUSB_AO BIT(6) +#define VREG_USE_XUSB_AO BIT(7) +#define USBOP_VAL_PD BIT(8) +#define USBON_VAL_PD BIT(9) +#define E_DPD_OVRD_EN BIT(10) +#define E_DPD_OVRD_VAL BIT(11) + +#define XUSB_AO_UHSIC_PAD_CFG(x) (0x150 + (x) * 4) +#define STROBE_VAL_PD BIT(0) +#define DATA0_VAL_PD BIT(1) +#define USE_XUSB_AO BIT(4) + #define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \ { \ .name = _name, \ @@ -130,16 +241,37 @@ struct tegra_xusb_fuse_calibration { u32 rpd_ctrl; }; +struct tegra186_xusb_padctl_context { + u32 vbus_id; + u32 usb2_pad_mux; + u32 usb2_port_cap; + u32 ss_port_cap; +}; + struct tegra186_xusb_padctl { struct tegra_xusb_padctl base; + void __iomem *ao_regs; struct tegra_xusb_fuse_calibration calib; /* UTMI bias and tracking */ struct clk *usb2_trk_clk; unsigned int bias_pad_enable; + + /* padctl context */ + struct tegra186_xusb_padctl_context context; }; +static inline void ao_writel(struct tegra186_xusb_padctl *priv, u32 value, unsigned int offset) +{ + writel(value, priv->ao_regs + offset); +} + +static inline u32 ao_readl(struct tegra186_xusb_padctl *priv, unsigned int offset) +{ + return readl(priv->ao_regs + offset); +} + static inline struct tegra186_xusb_padctl * to_tegra186_xusb_padctl(struct tegra_xusb_padctl *padctl) { @@ -180,9 +312,264 @@ static void tegra186_usb2_lane_remove(struct tegra_xusb_lane *lane) kfree(usb2); } +static int tegra186_utmi_enable_phy_sleepwalk(struct tegra_xusb_lane *lane, + enum usb_device_speed speed) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + /* ensure sleepwalk logic is disabled */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value &= ~MASTER_ENABLE; + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* ensure sleepwalk logics are in low power mode */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value |= MASTER_CFG_SEL; + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* set debounce time */ + value = ao_readl(priv, XUSB_AO_USB_DEBOUNCE_DEL); + value &= ~UTMIP_LINE_DEB_CNT(~0); + value |= UTMIP_LINE_DEB_CNT(1); + ao_writel(priv, value, XUSB_AO_USB_DEBOUNCE_DEL); + + /* ensure fake events of sleepwalk logic are desiabled */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value &= ~(FAKE_USBOP_VAL | FAKE_USBON_VAL | + FAKE_USBOP_EN | FAKE_USBON_EN); + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* ensure wake events of sleepwalk logic are not latched */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value &= ~LINE_WAKEUP_EN; + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* disable wake event triggers of sleepwalk logic */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value &= ~WAKE_VAL(~0); + value |= WAKE_VAL_NONE; + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* power down the line state detectors of the pad */ + value = ao_readl(priv, XUSB_AO_UTMIP_PAD_CFG(index)); + value |= (USBOP_VAL_PD | USBON_VAL_PD); + ao_writel(priv, value, XUSB_AO_UTMIP_PAD_CFG(index)); + + /* save state per speed */ + value = ao_readl(priv, XUSB_AO_UTMIP_SAVED_STATE(index)); + value &= ~SPEED(~0); + + switch (speed) { + case USB_SPEED_HIGH: + value |= UTMI_HS; + break; + + case USB_SPEED_FULL: + value |= UTMI_FS; + break; + + case USB_SPEED_LOW: + value |= UTMI_LS; + break; + + default: + value |= UTMI_RST; + break; + } + + ao_writel(priv, value, XUSB_AO_UTMIP_SAVED_STATE(index)); + + /* enable the trigger of the sleepwalk logic */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value |= LINEVAL_WALK_EN; + value &= ~WAKE_WALK_EN; + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* reset the walk pointer and clear the alarm of the sleepwalk logic, + * as well as capture the configuration of the USB2.0 pad + */ + value = ao_readl(priv, XUSB_AO_UTMIP_TRIGGERS(index)); + value |= (CLR_WALK_PTR | CLR_WAKE_ALARM | CAP_CFG); + ao_writel(priv, value, XUSB_AO_UTMIP_TRIGGERS(index)); + + /* setup the pull-ups and pull-downs of the signals during the four + * stages of sleepwalk. + * if device is connected, program sleepwalk logic to maintain a J and + * keep driving K upon seeing remote wake. + */ + value = USBOP_RPD_A | USBOP_RPD_B | USBOP_RPD_C | USBOP_RPD_D; + value |= USBON_RPD_A | USBON_RPD_B | USBON_RPD_C | USBON_RPD_D; + + switch (speed) { + case USB_SPEED_HIGH: + case USB_SPEED_FULL: + /* J state: D+/D- = high/low, K state: D+/D- = low/high */ + value |= HIGHZ_A; + value |= AP_A; + value |= AN_B | AN_C | AN_D; + break; + + case USB_SPEED_LOW: + /* J state: D+/D- = low/high, K state: D+/D- = high/low */ + value |= HIGHZ_A; + value |= AN_A; + value |= AP_B | AP_C | AP_D; + break; + + default: + value |= HIGHZ_A | HIGHZ_B | HIGHZ_C | HIGHZ_D; + break; + } + + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK(index)); + + /* power up the line state detectors of the pad */ + value = ao_readl(priv, XUSB_AO_UTMIP_PAD_CFG(index)); + value &= ~(USBOP_VAL_PD | USBON_VAL_PD); + ao_writel(priv, value, XUSB_AO_UTMIP_PAD_CFG(index)); + + usleep_range(150, 200); + + /* switch the electric control of the USB2.0 pad to XUSB_AO */ + value = ao_readl(priv, XUSB_AO_UTMIP_PAD_CFG(index)); + value |= FSLS_USE_XUSB_AO | TRK_CTRL_USE_XUSB_AO | RPD_CTRL_USE_XUSB_AO | + RPU_USE_XUSB_AO | VREG_USE_XUSB_AO; + ao_writel(priv, value, XUSB_AO_UTMIP_PAD_CFG(index)); + + /* set the wake signaling trigger events */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value &= ~WAKE_VAL(~0); + value |= WAKE_VAL_ANY; + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* enable the wake detection */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value |= MASTER_ENABLE | LINE_WAKEUP_EN; + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra186_utmi_disable_phy_sleepwalk(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + /* disable the wake detection */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value &= ~(MASTER_ENABLE | LINE_WAKEUP_EN); + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* switch the electric control of the USB2.0 pad to XUSB vcore logic */ + value = ao_readl(priv, XUSB_AO_UTMIP_PAD_CFG(index)); + value &= ~(FSLS_USE_XUSB_AO | TRK_CTRL_USE_XUSB_AO | RPD_CTRL_USE_XUSB_AO | + RPU_USE_XUSB_AO | VREG_USE_XUSB_AO); + ao_writel(priv, value, XUSB_AO_UTMIP_PAD_CFG(index)); + + /* disable wake event triggers of sleepwalk logic */ + value = ao_readl(priv, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + value &= ~WAKE_VAL(~0); + value |= WAKE_VAL_NONE; + ao_writel(priv, value, XUSB_AO_UTMIP_SLEEPWALK_CFG(index)); + + /* power down the line state detectors of the port */ + value = ao_readl(priv, XUSB_AO_UTMIP_PAD_CFG(index)); + value |= USBOP_VAL_PD | USBON_VAL_PD; + ao_writel(priv, value, XUSB_AO_UTMIP_PAD_CFG(index)); + + /* clear alarm of the sleepwalk logic */ + value = ao_readl(priv, XUSB_AO_UTMIP_TRIGGERS(index)); + value |= CLR_WAKE_ALARM; + ao_writel(priv, value, XUSB_AO_UTMIP_TRIGGERS(index)); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra186_utmi_enable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_PORT_WAKEUP_EVENT(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_PORT_WAKE_INTERRUPT_ENABLE(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra186_utmi_disable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~ALL_WAKE_EVENTS; + value &= ~USB2_PORT_WAKE_INTERRUPT_ENABLE(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_PORT_WAKEUP_EVENT(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static bool tegra186_utmi_phy_remote_wake_detected(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + if ((value & USB2_PORT_WAKE_INTERRUPT_ENABLE(index)) && + (value & USB2_PORT_WAKEUP_EVENT(index))) + return true; + + return false; +} + static const struct tegra_xusb_lane_ops tegra186_usb2_lane_ops = { .probe = tegra186_usb2_lane_probe, .remove = tegra186_usb2_lane_remove, + .enable_phy_sleepwalk = tegra186_utmi_enable_phy_sleepwalk, + .disable_phy_sleepwalk = tegra186_utmi_disable_phy_sleepwalk, + .enable_phy_wake = tegra186_utmi_enable_phy_wake, + .disable_phy_wake = tegra186_utmi_disable_phy_wake, + .remote_wake_detected = tegra186_utmi_phy_remote_wake_detected, }; static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl) @@ -656,10 +1043,128 @@ static void tegra186_usb3_lane_remove(struct tegra_xusb_lane *lane) kfree(usb3); } +static int tegra186_usb3_enable_phy_sleepwalk(struct tegra_xusb_lane *lane, + enum usb_device_speed speed) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value |= SSPX_ELPG_CLAMP_EN_EARLY(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + usleep_range(100, 200); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value |= SSPX_ELPG_CLAMP_EN(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + usleep_range(250, 350); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra186_usb3_disable_phy_sleepwalk(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value &= ~SSPX_ELPG_CLAMP_EN_EARLY(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + usleep_range(100, 200); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value &= ~SSPX_ELPG_CLAMP_EN(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra186_usb3_enable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~ALL_WAKE_EVENTS; + value |= SS_PORT_WAKEUP_EVENT(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~ALL_WAKE_EVENTS; + value |= SS_PORT_WAKE_INTERRUPT_ENABLE(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra186_usb3_disable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~ALL_WAKE_EVENTS; + value &= ~SS_PORT_WAKE_INTERRUPT_ENABLE(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~ALL_WAKE_EVENTS; + value |= SS_PORT_WAKEUP_EVENT(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static bool tegra186_usb3_phy_remote_wake_detected(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + if ((value & SS_PORT_WAKE_INTERRUPT_ENABLE(index)) && (value & SS_PORT_WAKEUP_EVENT(index))) + return true; + + return false; +} + static const struct tegra_xusb_lane_ops tegra186_usb3_lane_ops = { .probe = tegra186_usb3_lane_probe, .remove = tegra186_usb3_lane_remove, + .enable_phy_sleepwalk = tegra186_usb3_enable_phy_sleepwalk, + .disable_phy_sleepwalk = tegra186_usb3_disable_phy_sleepwalk, + .enable_phy_wake = tegra186_usb3_enable_phy_wake, + .disable_phy_wake = tegra186_usb3_disable_phy_wake, + .remote_wake_detected = tegra186_usb3_phy_remote_wake_detected, }; + static int tegra186_usb3_port_enable(struct tegra_xusb_port *port) { return 0; @@ -913,7 +1418,9 @@ static struct tegra_xusb_padctl * tegra186_xusb_padctl_probe(struct device *dev, const struct tegra_xusb_padctl_soc *soc) { + struct platform_device *pdev = to_platform_device(dev); struct tegra186_xusb_padctl *priv; + struct resource *res; int err; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); @@ -923,6 +1430,11 @@ tegra186_xusb_padctl_probe(struct device *dev, priv->base.dev = dev; priv->base.soc = soc; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ao"); + priv->ao_regs = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->ao_regs)) + return ERR_CAST(priv->ao_regs); + err = tegra186_xusb_read_fuse_calibration(priv); if (err < 0) return ERR_PTR(err); @@ -930,6 +1442,40 @@ tegra186_xusb_padctl_probe(struct device *dev, return &priv->base; } +static void tegra186_xusb_padctl_save(struct tegra_xusb_padctl *padctl) +{ + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); + + priv->context.vbus_id = padctl_readl(padctl, USB2_VBUS_ID); + priv->context.usb2_pad_mux = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX); + priv->context.usb2_port_cap = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP); + priv->context.ss_port_cap = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CAP); +} + +static void tegra186_xusb_padctl_restore(struct tegra_xusb_padctl *padctl) +{ + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); + + padctl_writel(padctl, priv->context.usb2_pad_mux, XUSB_PADCTL_USB2_PAD_MUX); + padctl_writel(padctl, priv->context.usb2_port_cap, XUSB_PADCTL_USB2_PORT_CAP); + padctl_writel(padctl, priv->context.ss_port_cap, XUSB_PADCTL_SS_PORT_CAP); + padctl_writel(padctl, priv->context.vbus_id, USB2_VBUS_ID); +} + +static int tegra186_xusb_padctl_suspend_noirq(struct tegra_xusb_padctl *padctl) +{ + tegra186_xusb_padctl_save(padctl); + + return 0; +} + +static int tegra186_xusb_padctl_resume_noirq(struct tegra_xusb_padctl *padctl) +{ + tegra186_xusb_padctl_restore(padctl); + + return 0; +} + static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl) { } @@ -937,6 +1483,8 @@ static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl) static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = { .probe = tegra186_xusb_padctl_probe, .remove = tegra186_xusb_padctl_remove, + .suspend_noirq = tegra186_xusb_padctl_suspend_noirq, + .resume_noirq = tegra186_xusb_padctl_resume_noirq, .vbus_override = tegra186_xusb_padctl_vbus_override, }; |