diff options
Diffstat (limited to 'drivers/net/wireless/b43/main.c')
-rw-r--r-- | drivers/net/wireless/b43/main.c | 87 |
1 files changed, 55 insertions, 32 deletions
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index cb4a8712946a..6456afebdba1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -80,8 +80,8 @@ static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -int b43_modparam_qos = 1; -module_param_named(qos, b43_modparam_qos, int, 0444); +static int modparam_qos = 1; +module_param_named(qos, modparam_qos, int, 0444); MODULE_PARM_DESC(qos, "Enable QOS support (default on)"); static int modparam_btcoex = 1; @@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev, u64 value) b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi); } +/* Read the firmware capabilities bitmask (Opensource firmware only) */ +static u16 b43_fwcapa_read(struct b43_wldev *dev) +{ + B43_WARN_ON(!dev->fw.opensource); + return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA); +} + void b43_tsf_read(struct b43_wldev *dev, u64 *tsf) { u32 low, high; @@ -2307,12 +2314,34 @@ static int b43_upload_microcode(struct b43_wldev *dev) dev->fw.patch = fwpatch; dev->fw.opensource = (fwdate == 0xFFFF); + /* Default to use-all-queues. */ + dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues; + dev->qos_enabled = !!modparam_qos; + /* Default to firmware/hardware crypto acceleration. */ + dev->hwcrypto_enabled = 1; + if (dev->fw.opensource) { + u16 fwcapa; + /* Patchlevel info is encoded in the "time" field. */ dev->fw.patch = fwtime; - b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n", - dev->fw.rev, dev->fw.patch, - dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : ""); + b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n", + dev->fw.rev, dev->fw.patch); + + fwcapa = b43_fwcapa_read(dev); + if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) { + b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n"); + /* Disable hardware crypto and fall back to software crypto. */ + dev->hwcrypto_enabled = 0; + } + if (!(fwcapa & B43_FWCAPA_QOS)) { + b43info(dev->wl, "QoS not supported by firmware\n"); + /* Disable QoS. Tweak hw->queues to 1. It will be restored before + * ieee80211_unregister to make sure the networking core can + * properly free possible resources. */ + dev->wl->hw->queues = 1; + dev->qos_enabled = 0; + } } else { b43info(dev->wl, "Loading firmware version %u.%u " "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", @@ -3470,7 +3499,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { - b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); + b43_software_rfkill(dev, false); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { b43info(dev->wl, "The hardware RF-kill button " @@ -3478,7 +3507,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) "Press the button to turn it on.\n"); } } else { - b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + b43_software_rfkill(dev, true); b43info(dev->wl, "Radio turned off by software\n"); } } @@ -3627,7 +3656,7 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (!dev || b43_status(dev) < B43_STAT_INITIALIZED) goto out_unlock; - if (dev->fw.pcm_request_failed) { + if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) { /* We don't have firmware for the crypto engine. * Must use software-crypto. */ err = -EOPNOTSUPP; @@ -4298,7 +4327,6 @@ static int b43_op_start(struct ieee80211_hw *hw) struct b43_wldev *dev = wl->current_dev; int did_init = 0; int err = 0; - bool do_rfkill_exit = 0; /* Kill all old instance specific information to make sure * the card won't use it in the short timeframe between start @@ -4312,18 +4340,12 @@ static int b43_op_start(struct ieee80211_hw *hw) wl->beacon1_uploaded = 0; wl->beacon_templates_virgin = 1; - /* First register RFkill. - * LEDs that are registered later depend on it. */ - b43_rfkill_init(dev); - mutex_lock(&wl->mutex); if (b43_status(dev) < B43_STAT_INITIALIZED) { err = b43_wireless_core_init(dev); - if (err) { - do_rfkill_exit = 1; + if (err) goto out_mutex_unlock; - } did_init = 1; } @@ -4332,17 +4354,16 @@ static int b43_op_start(struct ieee80211_hw *hw) if (err) { if (did_init) b43_wireless_core_exit(dev); - do_rfkill_exit = 1; goto out_mutex_unlock; } } + /* XXX: only do if device doesn't support rfkill irq */ + wiphy_rfkill_start_polling(hw->wiphy); + out_mutex_unlock: mutex_unlock(&wl->mutex); - if (do_rfkill_exit) - b43_rfkill_exit(dev); - return err; } @@ -4351,7 +4372,6 @@ static void b43_op_stop(struct ieee80211_hw *hw) struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; - b43_rfkill_exit(dev); cancel_work_sync(&(wl->beacon_update_trigger)); mutex_lock(&wl->mutex); @@ -4433,6 +4453,7 @@ static const struct ieee80211_ops b43_hw_ops = { .sta_notify = b43_op_sta_notify, .sw_scan_start = b43_op_sw_scan_start_notifier, .sw_scan_complete = b43_op_sw_scan_complete_notifier, + .rfkill_poll = b43_rfkill_poll, }; /* Hard-reset the chip. Do not call this directly. @@ -4735,6 +4756,7 @@ static int b43_wireless_init(struct ssb_device *dev) b43err(NULL, "Could not allocate ieee80211 device\n"); goto out; } + wl = hw_to_b43_wl(hw); /* fill hw info */ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | @@ -4748,7 +4770,8 @@ static int b43_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_ADHOC); - hw->queues = b43_modparam_qos ? 4 : 1; + hw->queues = modparam_qos ? 4 : 1; + wl->mac80211_initially_registered_queues = hw->queues; hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) @@ -4756,9 +4779,7 @@ static int b43_wireless_init(struct ssb_device *dev) else SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); - /* Get and initialize struct b43_wl */ - wl = hw_to_b43_wl(hw); - memset(wl, 0, sizeof(*wl)); + /* Initialize struct b43_wl */ wl->hw = hw; spin_lock_init(&wl->irq_lock); rwlock_init(&wl->tx_lock); @@ -4824,8 +4845,13 @@ static void b43_remove(struct ssb_device *dev) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); - if (wl->current_dev == wldev) + if (wl->current_dev == wldev) { + /* Restore the queues count before unregistering, because firmware detect + * might have modified it. Restoring is important, so the networking + * stack can properly free resources. */ + wl->hw->queues = wl->mac80211_initially_registered_queues; ieee80211_unregister_hw(wl->hw); + } b43_one_core_detach(dev); @@ -4920,7 +4946,7 @@ static struct ssb_driver b43_ssb_driver = { static void b43_print_driverinfo(void) { const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "", - *feat_leds = "", *feat_rfkill = ""; + *feat_leds = ""; #ifdef CONFIG_B43_PCI_AUTOSELECT feat_pci = "P"; @@ -4934,14 +4960,11 @@ static void b43_print_driverinfo(void) #ifdef CONFIG_B43_LEDS feat_leds = "L"; #endif -#ifdef CONFIG_B43_RFKILL - feat_rfkill = "R"; -#endif printk(KERN_INFO "Broadcom 43xx driver loaded " - "[ Features: %s%s%s%s%s, Firmware-ID: " + "[ Features: %s%s%s%s, Firmware-ID: " B43_SUPPORTED_FIRMWARE_ID " ]\n", feat_pci, feat_pcmcia, feat_nphy, - feat_leds, feat_rfkill); + feat_leds); } static int __init b43_init(void) |