diff options
Diffstat (limited to 'drivers/net/phy/realtek.c')
| -rw-r--r-- | drivers/net/phy/realtek.c | 26 |
1 files changed, 2 insertions, 24 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 10df52ccddfe..d6a10f323117 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -151,21 +151,14 @@ static int rtl8211_config_aneg(struct phy_device *phydev) static int rtl8211c_config_init(struct phy_device *phydev) { /* RTL8211C has an issue when operating in Gigabit slave mode */ - phy_set_bits(phydev, MII_CTRL1000, - CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); - - return genphy_config_init(phydev); + return phy_set_bits(phydev, MII_CTRL1000, + CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); } static int rtl8211f_config_init(struct phy_device *phydev) { - int ret; u16 val = 0; - ret = genphy_config_init(phydev); - if (ret < 0) - return ret; - /* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) @@ -192,10 +185,6 @@ static int rtl8366rb_config_init(struct phy_device *phydev) { int ret; - ret = genphy_config_init(phydev); - if (ret < 0) - return ret; - ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE, RTL8366RB_POWER_SAVE_ON); if (ret) { @@ -210,11 +199,9 @@ static struct phy_driver realtek_drvs[] = { { PHY_ID_MATCH_EXACT(0x00008201), .name = "RTL8201CP Ethernet", - .features = PHY_BASIC_FEATURES, }, { PHY_ID_MATCH_EXACT(0x001cc816), .name = "RTL8201F Fast Ethernet", - .features = PHY_BASIC_FEATURES, .ack_interrupt = &rtl8201_ack_interrupt, .config_intr = &rtl8201_config_intr, .suspend = genphy_suspend, @@ -224,14 +211,12 @@ static struct phy_driver realtek_drvs[] = { }, { PHY_ID_MATCH_EXACT(0x001cc910), .name = "RTL8211 Gigabit Ethernet", - .features = PHY_GBIT_FEATURES, .config_aneg = rtl8211_config_aneg, .read_mmd = &genphy_read_mmd_unsupported, .write_mmd = &genphy_write_mmd_unsupported, }, { PHY_ID_MATCH_EXACT(0x001cc912), .name = "RTL8211B Gigabit Ethernet", - .features = PHY_GBIT_FEATURES, .ack_interrupt = &rtl821x_ack_interrupt, .config_intr = &rtl8211b_config_intr, .read_mmd = &genphy_read_mmd_unsupported, @@ -241,14 +226,12 @@ static struct phy_driver realtek_drvs[] = { }, { PHY_ID_MATCH_EXACT(0x001cc913), .name = "RTL8211C Gigabit Ethernet", - .features = PHY_GBIT_FEATURES, .config_init = rtl8211c_config_init, .read_mmd = &genphy_read_mmd_unsupported, .write_mmd = &genphy_write_mmd_unsupported, }, { PHY_ID_MATCH_EXACT(0x001cc914), .name = "RTL8211DN Gigabit Ethernet", - .features = PHY_GBIT_FEATURES, .ack_interrupt = rtl821x_ack_interrupt, .config_intr = rtl8211e_config_intr, .suspend = genphy_suspend, @@ -256,7 +239,6 @@ static struct phy_driver realtek_drvs[] = { }, { PHY_ID_MATCH_EXACT(0x001cc915), .name = "RTL8211E Gigabit Ethernet", - .features = PHY_GBIT_FEATURES, .ack_interrupt = &rtl821x_ack_interrupt, .config_intr = &rtl8211e_config_intr, .suspend = genphy_suspend, @@ -264,7 +246,6 @@ static struct phy_driver realtek_drvs[] = { }, { PHY_ID_MATCH_EXACT(0x001cc916), .name = "RTL8211F Gigabit Ethernet", - .features = PHY_GBIT_FEATURES, .config_init = &rtl8211f_config_init, .ack_interrupt = &rtl8211f_ack_interrupt, .config_intr = &rtl8211f_config_intr, @@ -275,8 +256,6 @@ static struct phy_driver realtek_drvs[] = { }, { PHY_ID_MATCH_EXACT(0x001cc800), .name = "Generic Realtek PHY", - .features = PHY_GBIT_FEATURES, - .config_init = genphy_config_init, .suspend = genphy_suspend, .resume = genphy_resume, .read_page = rtl821x_read_page, @@ -284,7 +263,6 @@ static struct phy_driver realtek_drvs[] = { }, { PHY_ID_MATCH_EXACT(0x001cc961), .name = "RTL8366RB Gigabit Ethernet", - .features = PHY_GBIT_FEATURES, .config_init = &rtl8366rb_config_init, /* These interrupts are handled by the irq controller * embedded inside the RTL8366RB, they get unmasked when the |