diff options
Diffstat (limited to 'drivers/net/phy/mdio-mux-meson-g12a.c')
-rw-r--r-- | drivers/net/phy/mdio-mux-meson-g12a.c | 380 |
1 files changed, 380 insertions, 0 deletions
diff --git a/drivers/net/phy/mdio-mux-meson-g12a.c b/drivers/net/phy/mdio-mux-meson-g12a.c new file mode 100644 index 000000000000..6fa29ea8e2a3 --- /dev/null +++ b/drivers/net/phy/mdio-mux-meson-g12a.c @@ -0,0 +1,380 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019 Baylibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/mdio-mux.h> +#include <linux/module.h> +#include <linux/phy.h> +#include <linux/platform_device.h> + +#define ETH_PLL_STS 0x40 +#define ETH_PLL_CTL0 0x44 +#define PLL_CTL0_LOCK_DIG BIT(30) +#define PLL_CTL0_RST BIT(29) +#define PLL_CTL0_EN BIT(28) +#define PLL_CTL0_SEL BIT(23) +#define PLL_CTL0_N GENMASK(14, 10) +#define PLL_CTL0_M GENMASK(8, 0) +#define PLL_LOCK_TIMEOUT 1000000 +#define PLL_MUX_NUM_PARENT 2 +#define ETH_PLL_CTL1 0x48 +#define ETH_PLL_CTL2 0x4c +#define ETH_PLL_CTL3 0x50 +#define ETH_PLL_CTL4 0x54 +#define ETH_PLL_CTL5 0x58 +#define ETH_PLL_CTL6 0x5c +#define ETH_PLL_CTL7 0x60 + +#define ETH_PHY_CNTL0 0x80 +#define EPHY_G12A_ID 0x33000180 +#define ETH_PHY_CNTL1 0x84 +#define PHY_CNTL1_ST_MODE GENMASK(2, 0) +#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3) +#define EPHY_DFLT_ADD 8 +#define PHY_CNTL1_MII_MODE GENMASK(15, 14) +#define EPHY_MODE_RMII 0x1 +#define PHY_CNTL1_CLK_EN BIT(16) +#define PHY_CNTL1_CLKFREQ BIT(17) +#define PHY_CNTL1_PHY_ENB BIT(18) +#define ETH_PHY_CNTL2 0x88 +#define PHY_CNTL2_USE_INTERNAL BIT(5) +#define PHY_CNTL2_SMI_SRC_MAC BIT(6) +#define PHY_CNTL2_RX_CLK_EPHY BIT(9) + +#define MESON_G12A_MDIO_EXTERNAL_ID 0 +#define MESON_G12A_MDIO_INTERNAL_ID 1 + +struct g12a_mdio_mux { + bool pll_is_enabled; + void __iomem *regs; + void *mux_handle; + struct clk *pclk; + struct clk *pll; +}; + +struct g12a_ephy_pll { + void __iomem *base; + struct clk_hw hw; +}; + +#define g12a_ephy_pll_to_dev(_hw) \ + container_of(_hw, struct g12a_ephy_pll, hw) + +static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + u32 val, m, n; + + val = readl(pll->base + ETH_PLL_CTL0); + m = FIELD_GET(PLL_CTL0_M, val); + n = FIELD_GET(PLL_CTL0_N, val); + + return parent_rate * m / n; +} + +static int g12a_ephy_pll_enable(struct clk_hw *hw) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + u32 val = readl(pll->base + ETH_PLL_CTL0); + + /* Apply both enable an reset */ + val |= PLL_CTL0_RST | PLL_CTL0_EN; + writel(val, pll->base + ETH_PLL_CTL0); + + /* Clear the reset to let PLL lock */ + val &= ~PLL_CTL0_RST; + writel(val, pll->base + ETH_PLL_CTL0); + + /* Poll on the digital lock instead of the usual analog lock + * This is done because bit 31 is unreliable on some SoC. Bit + * 31 may indicate that the PLL is not lock eventhough the clock + * is actually running + */ + return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val, + val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT); +} + +static void g12a_ephy_pll_disable(struct clk_hw *hw) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + u32 val; + + val = readl(pll->base + ETH_PLL_CTL0); + val &= ~PLL_CTL0_EN; + val |= PLL_CTL0_RST; + writel(val, pll->base + ETH_PLL_CTL0); +} + +static int g12a_ephy_pll_is_enabled(struct clk_hw *hw) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + unsigned int val; + + val = readl(pll->base + ETH_PLL_CTL0); + + return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0; +} + +static void g12a_ephy_pll_init(struct clk_hw *hw) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + + /* Apply PLL HW settings */ + writel(0x29c0040a, pll->base + ETH_PLL_CTL0); + writel(0x927e0000, pll->base + ETH_PLL_CTL1); + writel(0xac5f49e5, pll->base + ETH_PLL_CTL2); + writel(0x00000000, pll->base + ETH_PLL_CTL3); + writel(0x00000000, pll->base + ETH_PLL_CTL4); + writel(0x20200000, pll->base + ETH_PLL_CTL5); + writel(0x0000c002, pll->base + ETH_PLL_CTL6); + writel(0x00000023, pll->base + ETH_PLL_CTL7); +} + +static const struct clk_ops g12a_ephy_pll_ops = { + .recalc_rate = g12a_ephy_pll_recalc_rate, + .is_enabled = g12a_ephy_pll_is_enabled, + .enable = g12a_ephy_pll_enable, + .disable = g12a_ephy_pll_disable, + .init = g12a_ephy_pll_init, +}; + +static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv) +{ + int ret; + + /* Enable the phy clock */ + if (!priv->pll_is_enabled) { + ret = clk_prepare_enable(priv->pll); + if (ret) + return ret; + } + + priv->pll_is_enabled = true; + + /* Initialize ephy control */ + writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0); + writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) | + FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) | + FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) | + PHY_CNTL1_CLK_EN | + PHY_CNTL1_CLKFREQ | + PHY_CNTL1_PHY_ENB, + priv->regs + ETH_PHY_CNTL1); + writel(PHY_CNTL2_USE_INTERNAL | + PHY_CNTL2_SMI_SRC_MAC | + PHY_CNTL2_RX_CLK_EPHY, + priv->regs + ETH_PHY_CNTL2); + + return 0; +} + +static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv) +{ + /* Reset the mdio bus mux */ + writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2); + + /* Disable the phy clock if enabled */ + if (priv->pll_is_enabled) { + clk_disable_unprepare(priv->pll); + priv->pll_is_enabled = false; + } + + return 0; +} + +static int g12a_mdio_switch_fn(int current_child, int desired_child, + void *data) +{ + struct g12a_mdio_mux *priv = dev_get_drvdata(data); + + if (current_child == desired_child) + return 0; + + switch (desired_child) { + case MESON_G12A_MDIO_EXTERNAL_ID: + return g12a_enable_external_mdio(priv); + case MESON_G12A_MDIO_INTERNAL_ID: + return g12a_enable_internal_mdio(priv); + default: + return -EINVAL; + } +} + +static const struct of_device_id g12a_mdio_mux_match[] = { + { .compatible = "amlogic,g12a-mdio-mux", }, + {}, +}; +MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match); + +static int g12a_ephy_glue_clk_register(struct device *dev) +{ + struct g12a_mdio_mux *priv = dev_get_drvdata(dev); + const char *parent_names[PLL_MUX_NUM_PARENT]; + struct clk_init_data init; + struct g12a_ephy_pll *pll; + struct clk_mux *mux; + struct clk *clk; + char *name; + int i; + + /* get the mux parents */ + for (i = 0; i < PLL_MUX_NUM_PARENT; i++) { + char in_name[8]; + + snprintf(in_name, sizeof(in_name), "clkin%d", i); + clk = devm_clk_get(dev, in_name); + if (IS_ERR(clk)) { + if (PTR_ERR(clk) != -EPROBE_DEFER) + dev_err(dev, "Missing clock %s\n", in_name); + return PTR_ERR(clk); + } + + parent_names[i] = __clk_get_name(clk); + } + + /* create the input mux */ + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev)); + if (!name) + return -ENOMEM; + + init.name = name; + init.ops = &clk_mux_ro_ops; + init.flags = 0; + init.parent_names = parent_names; + init.num_parents = PLL_MUX_NUM_PARENT; + + mux->reg = priv->regs + ETH_PLL_CTL0; + mux->shift = __ffs(PLL_CTL0_SEL); + mux->mask = PLL_CTL0_SEL >> mux->shift; + mux->hw.init = &init; + + clk = devm_clk_register(dev, &mux->hw); + kfree(name); + if (IS_ERR(clk)) { + dev_err(dev, "failed to register input mux\n"); + return PTR_ERR(clk); + } + + /* create the pll */ + pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL); + if (!pll) + return -ENOMEM; + + name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev)); + if (!name) + return -ENOMEM; + + init.name = name; + init.ops = &g12a_ephy_pll_ops; + init.flags = 0; + parent_names[0] = __clk_get_name(clk); + init.parent_names = parent_names; + init.num_parents = 1; + + pll->base = priv->regs; + pll->hw.init = &init; + + clk = devm_clk_register(dev, &pll->hw); + kfree(name); + if (IS_ERR(clk)) { + dev_err(dev, "failed to register input mux\n"); + return PTR_ERR(clk); + } + + priv->pll = clk; + + return 0; +} + +static int g12a_mdio_mux_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct g12a_mdio_mux *priv; + struct resource *res; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); + + priv->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(priv->pclk)) { + ret = PTR_ERR(priv->pclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get peripheral clock\n"); + return ret; + } + + /* Make sure the device registers are clocked */ + ret = clk_prepare_enable(priv->pclk); + if (ret) { + dev_err(dev, "failed to enable peripheral clock"); + return ret; + } + + /* Register PLL in CCF */ + ret = g12a_ephy_glue_clk_register(dev); + if (ret) + goto err; + + ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn, + &priv->mux_handle, dev, NULL); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "mdio multiplexer init failed: %d", ret); + goto err; + } + + return 0; + +err: + clk_disable_unprepare(priv->pclk); + return ret; +} + +static int g12a_mdio_mux_remove(struct platform_device *pdev) +{ + struct g12a_mdio_mux *priv = platform_get_drvdata(pdev); + + mdio_mux_uninit(priv->mux_handle); + + if (priv->pll_is_enabled) + clk_disable_unprepare(priv->pll); + + clk_disable_unprepare(priv->pclk); + + return 0; +} + +static struct platform_driver g12a_mdio_mux_driver = { + .probe = g12a_mdio_mux_probe, + .remove = g12a_mdio_mux_remove, + .driver = { + .name = "g12a-mdio_mux", + .of_match_table = g12a_mdio_mux_match, + }, +}; +module_platform_driver(g12a_mdio_mux_driver); + +MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver"); +MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); +MODULE_LICENSE("GPL v2"); |