diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/mvpp2.c')
-rw-r--r-- | drivers/net/ethernet/marvell/mvpp2.c | 51 |
1 files changed, 39 insertions, 12 deletions
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index ece61f1727e4..5e580482769e 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -4871,6 +4871,7 @@ static int mvpp22_gop_init(struct mvpp2_port *port) break; case PHY_INTERFACE_MODE_SGMII: case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: mvpp22_gop_init_sgmii(port); break; case PHY_INTERFACE_MODE_10GKR: @@ -4909,7 +4910,8 @@ static void mvpp22_gop_unmask_irq(struct mvpp2_port *port) if (phy_interface_mode_is_rgmii(port->phy_interface) || port->phy_interface == PHY_INTERFACE_MODE_SGMII || - port->phy_interface == PHY_INTERFACE_MODE_1000BASEX) { + port->phy_interface == PHY_INTERFACE_MODE_1000BASEX || + port->phy_interface == PHY_INTERFACE_MODE_2500BASEX) { /* Enable the GMAC link status irq for this port */ val = readl(port->base + MVPP22_GMAC_INT_SUM_MASK); val |= MVPP22_GMAC_INT_SUM_MASK_LINK_STAT; @@ -4940,7 +4942,8 @@ static void mvpp22_gop_mask_irq(struct mvpp2_port *port) if (phy_interface_mode_is_rgmii(port->phy_interface) || port->phy_interface == PHY_INTERFACE_MODE_SGMII || - port->phy_interface == PHY_INTERFACE_MODE_1000BASEX) { + port->phy_interface == PHY_INTERFACE_MODE_1000BASEX || + port->phy_interface == PHY_INTERFACE_MODE_2500BASEX) { val = readl(port->base + MVPP22_GMAC_INT_SUM_MASK); val &= ~MVPP22_GMAC_INT_SUM_MASK_LINK_STAT; writel(val, port->base + MVPP22_GMAC_INT_SUM_MASK); @@ -4953,7 +4956,8 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port) if (phy_interface_mode_is_rgmii(port->phy_interface) || port->phy_interface == PHY_INTERFACE_MODE_SGMII || - port->phy_interface == PHY_INTERFACE_MODE_1000BASEX) { + port->phy_interface == PHY_INTERFACE_MODE_1000BASEX || + port->phy_interface == PHY_INTERFACE_MODE_2500BASEX) { val = readl(port->base + MVPP22_GMAC_INT_MASK); val |= MVPP22_GMAC_INT_MASK_LINK_STAT; writel(val, port->base + MVPP22_GMAC_INT_MASK); @@ -4968,6 +4972,16 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port) mvpp22_gop_unmask_irq(port); } +/* Sets the PHY mode of the COMPHY (which configures the serdes lanes). + * + * The PHY mode used by the PPv2 driver comes from the network subsystem, while + * the one given to the COMPHY comes from the generic PHY subsystem. Hence they + * differ. + * + * The COMPHY configures the serdes lanes regardless of the actual use of the + * lanes by the physical layer. This is why configurations like + * "PPv2 (2500BaseX) - COMPHY (2500SGMII)" are valid. + */ static int mvpp22_comphy_init(struct mvpp2_port *port) { enum phy_mode mode; @@ -4981,6 +4995,9 @@ static int mvpp22_comphy_init(struct mvpp2_port *port) case PHY_INTERFACE_MODE_1000BASEX: mode = PHY_MODE_SGMII; break; + case PHY_INTERFACE_MODE_2500BASEX: + mode = PHY_MODE_2500SGMII; + break; case PHY_INTERFACE_MODE_10GKR: mode = PHY_MODE_10GKR; break; @@ -5062,7 +5079,8 @@ static void mvpp2_port_loopback_set(struct mvpp2_port *port, val &= ~MVPP2_GMAC_GMII_LB_EN_MASK; if (port->phy_interface == PHY_INTERFACE_MODE_SGMII || - port->phy_interface == PHY_INTERFACE_MODE_1000BASEX) + port->phy_interface == PHY_INTERFACE_MODE_1000BASEX || + port->phy_interface == PHY_INTERFACE_MODE_2500BASEX) val |= MVPP2_GMAC_PCS_LB_EN_MASK; else val &= ~MVPP2_GMAC_PCS_LB_EN_MASK; @@ -6273,7 +6291,8 @@ static irqreturn_t mvpp2_link_status_isr(int irq, void *dev_id) } } else if (phy_interface_mode_is_rgmii(port->phy_interface) || port->phy_interface == PHY_INTERFACE_MODE_SGMII || - port->phy_interface == PHY_INTERFACE_MODE_1000BASEX) { + port->phy_interface == PHY_INTERFACE_MODE_1000BASEX || + port->phy_interface == PHY_INTERFACE_MODE_2500BASEX) { val = readl(port->base + MVPP22_GMAC_INT_STAT); if (val & MVPP22_GMAC_INT_STAT_LINK) { event = true; @@ -8056,8 +8075,10 @@ static void mvpp2_phylink_validate(struct net_device *dev, phylink_set(mask, 10000baseT_Full); /* Fall-through */ case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: phylink_set(mask, 1000baseT_Full); phylink_set(mask, 1000baseX_Full); + phylink_set(mask, 2500baseX_Full); } bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS); @@ -8100,6 +8121,9 @@ static void mvpp2_gmac_link_state(struct mvpp2_port *port, case PHY_INTERFACE_MODE_1000BASEX: state->speed = SPEED_1000; break; + case PHY_INTERFACE_MODE_2500BASEX: + state->speed = SPEED_2500; + break; default: if (val & MVPP2_GMAC_STATUS0_GMII_SPEED) state->speed = SPEED_1000; @@ -8199,11 +8223,12 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, ctrl0 &= ~MVPP2_GMAC_PORT_TYPE_MASK; ctrl2 &= ~(MVPP2_GMAC_PORT_RESET_MASK | MVPP2_GMAC_PCS_ENABLE_MASK); - if (state->interface == PHY_INTERFACE_MODE_1000BASEX) { - /* 1000BaseX port cannot negotiate speed nor can it negotiate - * duplex: they are always operating with a fixed speed of - * 1000Mbps in full duplex, so force 1000 speed and full duplex - * here. + if (state->interface == PHY_INTERFACE_MODE_1000BASEX || + state->interface == PHY_INTERFACE_MODE_2500BASEX) { + /* 1000BaseX and 2500BaseX ports cannot negotiate speed nor can + * they negotiate duplex: they are always operating with a fixed + * speed of 1000/2500Mbps in full duplex, so force 1000/2500 + * speed and full duplex here. */ ctrl0 |= MVPP2_GMAC_PORT_TYPE_MASK; an |= MVPP2_GMAC_CONFIG_GMII_SPEED | @@ -8220,7 +8245,8 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, an |= MVPP2_GMAC_FC_ADV_ASM_EN; if (state->interface == PHY_INTERFACE_MODE_SGMII || - state->interface == PHY_INTERFACE_MODE_1000BASEX) { + state->interface == PHY_INTERFACE_MODE_1000BASEX || + state->interface == PHY_INTERFACE_MODE_2500BASEX) { an |= MVPP2_GMAC_IN_BAND_AUTONEG; ctrl2 |= MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PCS_ENABLE_MASK; @@ -8286,7 +8312,8 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode, mvpp2_xlg_config(port, mode, state); else if (phy_interface_mode_is_rgmii(state->interface) || state->interface == PHY_INTERFACE_MODE_SGMII || - state->interface == PHY_INTERFACE_MODE_1000BASEX) + state->interface == PHY_INTERFACE_MODE_1000BASEX || + state->interface == PHY_INTERFACE_MODE_2500BASEX) mvpp2_gmac_config(port, mode, state); if (port->priv->hw_version == MVPP21 && port->flags & MVPP2_F_LOOPBACK) |