diff options
Diffstat (limited to 'drivers/net/ethernet/ezchip')
| -rw-r--r-- | drivers/net/ethernet/ezchip/nps_enet.c | 30 | ||||
| -rw-r--r-- | drivers/net/ethernet/ezchip/nps_enet.h | 2 |
2 files changed, 24 insertions, 8 deletions
diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c index 1f23845a0694..085f9125cf42 100644 --- a/drivers/net/ethernet/ezchip/nps_enet.c +++ b/drivers/net/ethernet/ezchip/nps_enet.c @@ -145,7 +145,7 @@ static void nps_enet_tx_handler(struct net_device *ndev) u32 tx_ctrl_nt = (tx_ctrl_value & TX_CTL_NT_MASK) >> TX_CTL_NT_SHIFT; /* Check if we got TX */ - if (!priv->tx_packet_sent || tx_ctrl_ct) + if (!priv->tx_skb || tx_ctrl_ct) return; /* Ack Tx ctrl register */ @@ -160,7 +160,7 @@ static void nps_enet_tx_handler(struct net_device *ndev) } dev_kfree_skb(priv->tx_skb); - priv->tx_packet_sent = false; + priv->tx_skb = NULL; if (netif_queue_stopped(ndev)) netif_wake_queue(ndev); @@ -183,6 +183,9 @@ static int nps_enet_poll(struct napi_struct *napi, int budget) work_done = nps_enet_rx_handler(ndev); if (work_done < budget) { u32 buf_int_enable_value = 0; + u32 tx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL); + u32 tx_ctrl_ct = + (tx_ctrl_value & TX_CTL_CT_MASK) >> TX_CTL_CT_SHIFT; napi_complete(napi); @@ -192,6 +195,18 @@ static int nps_enet_poll(struct napi_struct *napi, int budget) nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, buf_int_enable_value); + + /* in case we will get a tx interrupt while interrupts + * are masked, we will lose it since the tx is edge interrupt. + * specifically, while executing the code section above, + * between nps_enet_tx_handler and the interrupts enable, all + * tx requests will be stuck until we will get an rx interrupt. + * the two code lines below will solve this situation by + * re-adding ourselves to the poll list. + */ + + if (priv->tx_skb && !tx_ctrl_ct) + napi_reschedule(napi); } return work_done; @@ -217,7 +232,7 @@ static irqreturn_t nps_enet_irq_handler(s32 irq, void *dev_instance) u32 tx_ctrl_ct = (tx_ctrl_value & TX_CTL_CT_MASK) >> TX_CTL_CT_SHIFT; u32 rx_ctrl_cr = (rx_ctrl_value & RX_CTL_CR_MASK) >> RX_CTL_CR_SHIFT; - if ((!tx_ctrl_ct && priv->tx_packet_sent) || rx_ctrl_cr) + if ((!tx_ctrl_ct && priv->tx_skb) || rx_ctrl_cr) if (likely(napi_schedule_prep(&priv->napi))) { nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); __napi_schedule(&priv->napi); @@ -387,8 +402,6 @@ static void nps_enet_send_frame(struct net_device *ndev, /* Write the length of the Frame */ tx_ctrl_value |= length << TX_CTL_NT_SHIFT; - /* Indicate SW is done */ - priv->tx_packet_sent = true; tx_ctrl_value |= NPS_ENET_ENABLE << TX_CTL_CT_SHIFT; /* Send Frame */ nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, tx_ctrl_value); @@ -465,7 +478,7 @@ static s32 nps_enet_open(struct net_device *ndev) s32 err; /* Reset private variables */ - priv->tx_packet_sent = false; + priv->tx_skb = NULL; priv->ge_mac_cfg_2_value = 0; priv->ge_mac_cfg_3_value = 0; @@ -534,6 +547,11 @@ static netdev_tx_t nps_enet_start_xmit(struct sk_buff *skb, priv->tx_skb = skb; + /* make sure tx_skb is actually written to the memory + * before the HW is informed and the IRQ is fired. + */ + wmb(); + nps_enet_send_frame(ndev, skb); return NETDEV_TX_OK; diff --git a/drivers/net/ethernet/ezchip/nps_enet.h b/drivers/net/ethernet/ezchip/nps_enet.h index d0cab600bce8..3939ca20cc9f 100644 --- a/drivers/net/ethernet/ezchip/nps_enet.h +++ b/drivers/net/ethernet/ezchip/nps_enet.h @@ -165,14 +165,12 @@ * struct nps_enet_priv - Storage of ENET's private information. * @regs_base: Base address of ENET memory-mapped control registers. * @irq: For RX/TX IRQ number. - * @tx_packet_sent: SW indication if frame is being sent. * @tx_skb: socket buffer of sent frame. * @napi: Structure for NAPI. */ struct nps_enet_priv { void __iomem *regs_base; s32 irq; - bool tx_packet_sent; struct sk_buff *tx_skb; struct napi_struct napi; u32 ge_mac_cfg_2_value; |