diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 22 |
1 files changed, 21 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 9eb65626644c..75ad824dd602 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -78,6 +78,9 @@ #define ESDHC_STROBE_DLL_STS_REF_LOCK (1 << 1) #define ESDHC_STROBE_DLL_STS_SLV_LOCK 0x1 +#define ESDHC_VEND_SPEC2 0xc8 +#define ESDHC_VEND_SPEC2_EN_BUSY_IRQ (1 << 8) + #define ESDHC_TUNING_CTRL 0xcc #define ESDHC_STD_TUNING_EN (1 << 24) /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ @@ -1178,6 +1181,23 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) /* disable DLL_CTRL delay line settings */ writel(0x0, host->ioaddr + ESDHC_DLL_CTRL); + /* + * For the case of command with busy, if set the bit + * ESDHC_VEND_SPEC2_EN_BUSY_IRQ, USDHC will generate a + * transfer complete interrupt when busy is deasserted. + * When CQHCI use DCMD to send a CMD need R1b respons, + * CQHCI require to set ESDHC_VEND_SPEC2_EN_BUSY_IRQ, + * otherwise DCMD will always meet timeout waiting for + * hardware interrupt issue. + */ + if (imx_data->socdata->flags & ESDHC_FLAG_CQHCI) { + tmp = readl(host->ioaddr + ESDHC_VEND_SPEC2); + tmp |= ESDHC_VEND_SPEC2_EN_BUSY_IRQ; + writel(tmp, host->ioaddr + ESDHC_VEND_SPEC2); + + host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; + } + if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { tmp = readl(host->ioaddr + ESDHC_TUNING_CTRL); tmp |= ESDHC_STD_TUNING_EN | @@ -1478,7 +1498,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) } if (imx_data->socdata->flags & ESDHC_FLAG_CQHCI) { - host->mmc->caps2 |= MMC_CAP2_CQE; + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; cq_host = devm_kzalloc(&pdev->dev, sizeof(*cq_host), GFP_KERNEL); if (IS_ERR(cq_host)) { err = PTR_ERR(cq_host); |