diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 93 |
1 files changed, 86 insertions, 7 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index de3e74cde51c..9da0e504bbe9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2,8 +2,14 @@ # Multifunction miscellaneous devices # -menu "Multifunction device drivers" +menuconfig MFD_SUPPORT + bool "Multifunction device drivers" depends on HAS_IOMEM + default y + help + Configure MFD device drivers. + +if MFD_SUPPORT config MFD_CORE tristate @@ -49,6 +55,7 @@ config MFD_SH_MOBILE_SDHI bool "Support for SuperH Mobile SDHI" depends on SUPERH || ARCH_SHMOBILE select MFD_CORE + select TMIO_MMC_DMA ---help--- This driver supports the SDHI hardware block found in many SuperH Mobile SoCs. @@ -115,6 +122,18 @@ config TPS65010 This driver can also be built as a module. If so, the module will be called tps65010. +config TPS6507X + tristate "TPS6507x Power Management / Touch Screen chips" + select MFD_CORE + depends on I2C + help + If you say yes here you get support for the TPS6507x series of + Power Management / Touch Screen chips. These include voltage + regulators, lithium ion/polymer battery charging, touch screen + and other features that are often used in portable devices. + This driver can also be built as a module. If so, the module + will be called tps6507x. + config MENELAUS bool "Texas Instruments TWL92330/Menelaus PM chip" depends on I2C=y && ARCH_OMAP2 @@ -158,10 +177,26 @@ config TWL4030_CODEC select MFD_CORE default n +config MFD_TC35892 + bool "Support Toshiba TC35892" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + help + Support for the Toshiba TC35892 I/O Expander. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_TMIO bool default n +config TMIO_MMC_DMA + bool + select DMA_ENGINE + select DMADEVICES + config MFD_T7L66XB bool "Support Toshiba T7L66XB" depends on ARM && HAVE_CLK @@ -345,9 +380,19 @@ config PCF50633_GPIO Say yes here if you want to include support GPIO for pins on the PCF50633 chip. +config ABX500_CORE + bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" + default y if ARCH_U300 + help + Say yes here if you have the ABX500 Mixed Signal IC family + chips. This core driver expose register access functions. + Functionality specific drivers using these functions can + remain unchanged when IC changes. Binding of the functions to + actual register access is done by the IC core driver. + config AB3100_CORE bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" - depends on I2C=y + depends on I2C=y && ABX500_CORE default y if ARCH_U300 help Select this to enable the AB3100 Mixed Signal IC core @@ -375,15 +420,30 @@ config EZX_PCAP This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. -config AB4500_CORE - tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" - depends on SPI +config AB8500_CORE + bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" + depends on SPI=y && GENERIC_HARDIRQS + select MFD_CORE help - Select this option to enable access to AB4500 power management + Select this option to enable access to AB8500 power management chip. This connects to U8500 on the SSP/SPI bus and exports read/write functions for the devices to get access to this chip. This chip embeds various other multimedia funtionalities as well. +config AB3550_CORE + bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions" + select MFD_CORE + depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE + help + Select this to enable the AB3550 Mixed Signal IC core + functionality. This connects to a AB3550 on the I2C bus + and expose a number of symbols needed for dependent devices + to read and write registers and subscribe to events from + this multi-functional IC. This is needed to use other features + of the AB3550 such as battery-backed RTC, charging control, + LEDs, vibrator, system power and temperature, power management + and ALSA sound. + config MFD_TIMBERDALE tristate "Support for the Timberdale FPGA" select MFD_CORE @@ -403,7 +463,26 @@ config LPC_SCH LPC bridge function of the Intel SCH provides support for System Management Bus and General Purpose I/O. -endmenu +config MFD_RDC321X + tristate "Support for RDC-R321x southbridge" + select MFD_CORE + depends on PCI + help + Say yes here if you want to have support for the RDC R-321x SoC + southbridge which provides access to GPIOs and Watchdog using the + southbridge PCI device configuration space. + +config MFD_JANZ_CMODIO + tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" + select MFD_CORE + depends on PCI + help + This is the core driver for the Janz CMOD-IO PCI MODULbus + carrier board. This device is a PCI to MODULbus bridge which may + host many different types of MODULbus daughterboards, including + CAN and GPIO controllers. + +endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 |