diff options
Diffstat (limited to 'drivers/media/video/cx88/cx88-cards.c')
| -rw-r--r-- | drivers/media/video/cx88/cx88-cards.c | 108 |
1 files changed, 104 insertions, 4 deletions
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 6bbbfc66bb4b..94b7a52629d0 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1969,6 +1969,54 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_HAUPPAUGE_IRONLY] = { + .name = "Hauppauge WinTV-IR Only", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [CX88_BOARD_WINFAST_DTV1800H] = { + .name = "Leadtek WinFast DTV1800 Hybrid", + .tuner_type = TUNER_XC2028, + .radio_type = TUNER_XC2028, + .tuner_addr = 0x61, + .radio_addr = 0x61, + /* + * GPIO setting + * + * 2: mute (0=off,1=on) + * 12: tuner reset pin + * 13: audio source (0=tuner audio,1=line in) + * 14: FM (0=on,1=off ???) + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6040, /* pin 13 = 0, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6000, /* pin 13 = 0, pin 14 = 0 */ + .gpio2 = 0x0000, + }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2382,6 +2430,14 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x153b, .subdevice = 0x1177, .card = CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII, + }, { + .subvendor = 0x0070, + .subdevice = 0x9290, + .card = CX88_BOARD_HAUPPAUGE_IRONLY, + }, { + .subvendor = 0x107d, + .subdevice = 0x6654, + .card = CX88_BOARD_WINFAST_DTV1800H, }, }; @@ -2448,6 +2504,7 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data) case 90500: /* Nova-T-PCI (oem) */ case 90501: /* Nova-T-PCI (oem/IR) */ case 92000: /* Nova-SE2 (OEM, No Video or IR) */ + case 92900: /* WinTV-IROnly (No analog or digital Video inputs) */ case 94009: /* WinTV-HVR1100 (Video and IR Retail) */ case 94501: /* WinTV-HVR1100 (Video and IR OEM) */ case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */ @@ -2579,6 +2636,23 @@ static int cx88_xc3028_geniatech_tuner_callback(struct cx88_core *core, return -EINVAL; } +static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + /* GPIO 12 (xc3028 tuner reset) */ + cx_set(MO_GP1_IO, 0x1010); + mdelay(50); + cx_clear(MO_GP1_IO, 0x10); + mdelay(50); + cx_set(MO_GP1_IO, 0x10); + mdelay(50); + return 0; + } + return -EINVAL; +} + /* ------------------------------------------------------------------- */ /* some Divco specific stuff */ static int cx88_pv_8000gt_callback(struct cx88_core *core, @@ -2651,6 +2725,8 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: return cx88_dvico_xc2028_callback(core, command, arg); + case CX88_BOARD_WINFAST_DTV1800H: + return cx88_xc3028_winfast1800h_callback(core, command, arg); } switch (command) { @@ -2690,10 +2766,22 @@ static int cx88_xc5000_tuner_callback(struct cx88_core *core, switch (core->boardnr) { case CX88_BOARD_PINNACLE_PCTV_HD_800i: if (command == 0) { /* This is the reset command from xc5000 */ - /* Reset XC5000 tuner via SYS_RSTO_pin */ - cx_write(MO_SRST_IO, 0); - msleep(10); - cx_write(MO_SRST_IO, 1); + + /* djh - According to the engineer at PCTV Systems, + the xc5000 reset pin is supposed to be on GPIO12. + However, despite three nights of effort, pulling + that GPIO low didn't reset the xc5000. While + pulling MO_SRST_IO low does reset the xc5000, this + also resets in the s5h1409 being reset as well. + This causes tuning to always fail since the internal + state of the s5h1409 does not match the driver's + state. Given that the only two conditions in which + the driver performs a reset is during firmware load + and powering down the chip, I am taking out the + reset. We know that the chip is being reset + when the cx88 comes online, and not being able to + do power management for this board is worse than + not having any tuning at all. */ return 0; } else { err_printk(core, "xc5000: unknown tuner " @@ -2825,6 +2913,16 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */ udelay(1000); break; + + case CX88_BOARD_WINFAST_DTV1800H: + /* GPIO 12 (xc3028 tuner reset) */ + cx_set(MO_GP1_IO, 0x1010); + mdelay(50); + cx_clear(MO_GP1_IO, 0x10); + mdelay(50); + cx_set(MO_GP1_IO, 0x10); + mdelay(50); + break; } } @@ -2845,6 +2943,7 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) core->i2c_algo.udelay = 16; break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + case CX88_BOARD_WINFAST_DTV1800H: ctl->demod = XC3028_FE_ZARLINK456; break; case CX88_BOARD_KWORLD_ATSC_120: @@ -2907,6 +3006,7 @@ static void cx88_card_setup(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_HVR1300: case CX88_BOARD_HAUPPAUGE_HVR4000: case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + case CX88_BOARD_HAUPPAUGE_IRONLY: if (0 == core->i2c_rc) hauppauge_eeprom(core, eeprom); break; |