diff options
Diffstat (limited to 'drivers/media/usb/b2c2/flexcop-usb.c')
| -rw-r--r-- | drivers/media/usb/b2c2/flexcop-usb.c | 587 |
1 files changed, 587 insertions, 0 deletions
diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c new file mode 100644 index 000000000000..8b6275f85908 --- /dev/null +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -0,0 +1,587 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-usb.c - covers the USB part + * see flexcop.c for copyright information + */ +#define FC_LOG_PREFIX "flexcop_usb" +#include "flexcop-usb.h" +#include "flexcop-common.h" + +/* Version information */ +#define DRIVER_VERSION "0.1" +#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver" +#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>" + +/* debug */ +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((debug & level)) printk(args); } while (0) + +#define debug_dump(b, l, method) do {\ + int i; \ + for (i = 0; i < l; i++) \ + method("%02x ", b[i]); \ + method("\n"); \ +} while (0) + +#define DEBSTATUS "" +#else +#define dprintk(level, args...) +#define debug_dump(b, l, method) +#define DEBSTATUS " (debugging is not enabled)" +#endif + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2," + "ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS); +#undef DEBSTATUS + +#define deb_info(args...) dprintk(0x01, args) +#define deb_ts(args...) dprintk(0x02, args) +#define deb_ctrl(args...) dprintk(0x04, args) +#define deb_i2c(args...) dprintk(0x08, args) +#define deb_v8(args...) dprintk(0x10, args) + +/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits + * in the IBI address, to make the V8 code simpler. + * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (the six bits used) + * in general: 0000 0HHH 000L LL00 + * IBI ADDRESS FORMAT: RHHH BLLL + * + * where R is the read(1)/write(0) bit, B is the busy bit + * and HHH and LLL are the two sets of three bits from the PCI address. + */ +#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) \ + (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70)) +#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) \ + (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4)) + +/* + * DKT 020228 + * - forget about this VENDOR_BUFFER_SIZE, read and write register + * deal with DWORD or 4 bytes, that should be should from now on + * - from now on, we don't support anything older than firm 1.00 + * I eliminated the write register as a 2 trip of writing hi word and lo word + * and force this to write only 4 bytes at a time. + * NOTE: this should work with all the firmware from 1.00 and newer + */ +static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read) +{ + struct flexcop_usb *fc_usb = fc->bus_specific; + u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG; + u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR; + u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | + (read ? 0x80 : 0); + + int len = usb_control_msg(fc_usb->udev, + read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT, + request, + request_type, /* 0xc0 read or 0x40 write */ + wAddress, + 0, + val, + sizeof(u32), + B2C2_WAIT_FOR_OPERATION_RDW * HZ); + + if (len != sizeof(u32)) { + err("error while %s dword from %d (%d).", read ? "reading" : + "writing", wAddress, wRegOffsPCI); + return -EIO; + } + return 0; +} +/* + * DKT 010817 - add support for V8 memory read/write and flash update + */ +static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, + flexcop_usb_request_t req, u8 page, u16 wAddress, + u8 *pbBuffer, u32 buflen) +{ + u8 request_type = USB_TYPE_VENDOR; + u16 wIndex; + int nWaitTime, pipe, len; + wIndex = page << 8; + + switch (req) { + case B2C2_USB_READ_V8_MEM: + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ; + request_type |= USB_DIR_IN; + pipe = B2C2_USB_CTRL_PIPE_IN; + break; + case B2C2_USB_WRITE_V8_MEM: + wIndex |= pbBuffer[0]; + request_type |= USB_DIR_OUT; + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE; + pipe = B2C2_USB_CTRL_PIPE_OUT; + break; + case B2C2_USB_FLASH_BLOCK: + request_type |= USB_DIR_OUT; + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH; + pipe = B2C2_USB_CTRL_PIPE_OUT; + break; + default: + deb_info("unsupported request for v8_mem_req %x.\n", req); + return -EINVAL; + } + deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req, + wAddress, wIndex, buflen); + + len = usb_control_msg(fc_usb->udev, pipe, + req, + request_type, + wAddress, + wIndex, + pbBuffer, + buflen, + nWaitTime * HZ); + + debug_dump(pbBuffer, len, deb_v8); + return len == buflen ? 0 : -EIO; +} + +#define bytes_left_to_read_on_page(paddr,buflen) \ + ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \ + ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK))) + +static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb, + flexcop_usb_request_t req, flexcop_usb_mem_page_t page_start, + u32 addr, int extended, u8 *buf, u32 len) +{ + int i,ret = 0; + u16 wMax; + u32 pagechunk = 0; + + switch(req) { + case B2C2_USB_READ_V8_MEM: + wMax = USB_MEM_READ_MAX; + break; + case B2C2_USB_WRITE_V8_MEM: + wMax = USB_MEM_WRITE_MAX; + break; + case B2C2_USB_FLASH_BLOCK: + wMax = USB_FLASH_MAX; + break; + default: + return -EINVAL; + break; + } + for (i = 0; i < len;) { + pagechunk = + wMax < bytes_left_to_read_on_page(addr, len) ? + wMax : + bytes_left_to_read_on_page(addr, len); + deb_info("%x\n", + (addr & V8_MEMORY_PAGE_MASK) | + (V8_MEMORY_EXTENDED*extended)); + + ret = flexcop_usb_v8_memory_req(fc_usb, req, + page_start + (addr / V8_MEMORY_PAGE_SIZE), + (addr & V8_MEMORY_PAGE_MASK) | + (V8_MEMORY_EXTENDED*extended), + &buf[i], pagechunk); + + if (ret < 0) + return ret; + addr += pagechunk; + len -= pagechunk; + } + return 0; +} + +static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended) +{ + return flexcop_usb_memory_req(fc->bus_specific, B2C2_USB_READ_V8_MEM, + V8_MEMORY_PAGE_FLASH, 0x1f010, 1, + fc->dvb_adapter.proposed_mac, 6); +} + +#if 0 +static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set, + flexcop_usb_utility_function_t func, u8 extra, u16 wIndex, + u16 buflen, u8 *pvBuffer) +{ + u16 wValue; + u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR; + int nWaitTime = 2, + pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len; + wValue = (func << 8) | extra; + + len = usb_control_msg(fc_usb->udev,pipe, + B2C2_USB_UTILITY, + request_type, + wValue, + wIndex, + pvBuffer, + buflen, + nWaitTime * HZ); + return len == buflen ? 0 : -EIO; +} +#endif + +/* usb i2c stuff */ +static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, + flexcop_usb_request_t req, flexcop_usb_i2c_function_t func, + u8 chipaddr, u8 addr, u8 *buf, u8 buflen) +{ + struct flexcop_usb *fc_usb = i2c->fc->bus_specific; + u16 wValue, wIndex; + int nWaitTime,pipe,len; + u8 request_type = USB_TYPE_VENDOR; + + switch (func) { + case USB_FUNC_I2C_WRITE: + case USB_FUNC_I2C_MULTIWRITE: + case USB_FUNC_I2C_REPEATWRITE: + /* DKT 020208 - add this to support special case of DiSEqC */ + case USB_FUNC_I2C_CHECKWRITE: + pipe = B2C2_USB_CTRL_PIPE_OUT; + nWaitTime = 2; + request_type |= USB_DIR_OUT; + break; + case USB_FUNC_I2C_READ: + case USB_FUNC_I2C_REPEATREAD: + pipe = B2C2_USB_CTRL_PIPE_IN; + nWaitTime = 2; + request_type |= USB_DIR_IN; + break; + default: + deb_info("unsupported function for i2c_req %x\n", func); + return -EINVAL; + } + wValue = (func << 8) | (i2c->port << 4); + wIndex = (chipaddr << 8 ) | addr; + + deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n", + func, request_type, req, + wValue & 0xff, wValue >> 8, + wIndex & 0xff, wIndex >> 8); + + len = usb_control_msg(fc_usb->udev,pipe, + req, + request_type, + wValue, + wIndex, + buf, + buflen, + nWaitTime * HZ); + return len == buflen ? 0 : -EREMOTEIO; +} + +/* actual bus specific access functions, + make sure prototype are/will be equal to pci */ +static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc, + flexcop_ibi_register reg) +{ + flexcop_ibi_value val; + val.raw = 0; + flexcop_usb_readwrite_dw(fc, reg, &val.raw, 1); + return val; +} + +static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, + flexcop_ibi_register reg, flexcop_ibi_value val) +{ + return flexcop_usb_readwrite_dw(fc, reg, &val.raw, 0); +} + +static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c, + flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) +{ + if (op == FC_READ) + return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST, + USB_FUNC_I2C_READ, chipaddr, addr, buf, len); + else + return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST, + USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len); +} + +static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, + u8 *buffer, int buffer_length) +{ + u8 *b; + int l; + + deb_ts("tmp_buffer_length=%d, buffer_length=%d\n", + fc_usb->tmp_buffer_length, buffer_length); + + if (fc_usb->tmp_buffer_length > 0) { + memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer, + buffer_length); + fc_usb->tmp_buffer_length += buffer_length; + b = fc_usb->tmp_buffer; + l = fc_usb->tmp_buffer_length; + } else { + b=buffer; + l=buffer_length; + } + + while (l >= 190) { + if (*b == 0xff) { + switch (*(b+1) & 0x03) { + case 0x01: /* media packet */ + if (*(b+2) == 0x47) + flexcop_pass_dmx_packets( + fc_usb->fc_dev, b+2, 1); + else + deb_ts("not ts packet %*ph\n", 4, b+2); + b += 190; + l -= 190; + break; + default: + deb_ts("wrong packet type\n"); + l = 0; + break; + } + } else { + deb_ts("wrong header\n"); + l = 0; + } + } + + if (l>0) + memcpy(fc_usb->tmp_buffer, b, l); + fc_usb->tmp_buffer_length = l; +} + +static void flexcop_usb_urb_complete(struct urb *urb) +{ + struct flexcop_usb *fc_usb = urb->context; + int i; + + if (urb->actual_length > 0) + deb_ts("urb completed, bufsize: %d actlen; %d\n", + urb->transfer_buffer_length, urb->actual_length); + + for (i = 0; i < urb->number_of_packets; i++) { + if (urb->iso_frame_desc[i].status < 0) { + err("iso frame descriptor %d has an error: %d\n", i, + urb->iso_frame_desc[i].status); + } else + if (urb->iso_frame_desc[i].actual_length > 0) { + deb_ts("passed %d bytes to the demux\n", + urb->iso_frame_desc[i].actual_length); + + flexcop_usb_process_frame(fc_usb, + urb->transfer_buffer + + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + } + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + usb_submit_urb(urb,GFP_ATOMIC); +} + +static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff) +{ + /* submit/kill iso packets */ + return 0; +} + +static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) +{ + int i; + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) + if (fc_usb->iso_urb[i] != NULL) { + deb_ts("unlinking/killing urb no. %d\n",i); + usb_kill_urb(fc_usb->iso_urb[i]); + usb_free_urb(fc_usb->iso_urb[i]); + } + + if (fc_usb->iso_buffer != NULL) + pci_free_consistent(NULL, + fc_usb->buffer_size, fc_usb->iso_buffer, + fc_usb->dma_addr); +} + +static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) +{ + u16 frame_size = le16_to_cpu( + fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize); + int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * + frame_size, i, j, ret; + int buffer_offset = 0; + + deb_ts("creating %d iso-urbs with %d frames " + "each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB, + B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize); + + fc_usb->iso_buffer = pci_alloc_consistent(NULL, + bufsize, &fc_usb->dma_addr); + if (fc_usb->iso_buffer == NULL) + return -ENOMEM; + + memset(fc_usb->iso_buffer, 0, bufsize); + fc_usb->buffer_size = bufsize; + + /* creating iso urbs */ + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) { + fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO, + GFP_ATOMIC); + if (fc_usb->iso_urb[i] == NULL) { + ret = -ENOMEM; + goto urb_error; + } + } + + /* initialising and submitting iso urbs */ + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) { + int frame_offset = 0; + struct urb *urb = fc_usb->iso_urb[i]; + deb_ts("initializing and submitting urb no. %d " + "(buf_offset: %d).\n", i, buffer_offset); + + urb->dev = fc_usb->udev; + urb->context = fc_usb; + urb->complete = flexcop_usb_urb_complete; + urb->pipe = B2C2_USB_DATA_PIPE; + urb->transfer_flags = URB_ISO_ASAP; + urb->interval = 1; + urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO; + urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO; + urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset; + + buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO; + for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) { + deb_ts("urb no: %d, frame: %d, frame_offset: %d\n", + i, j, frame_offset); + urb->iso_frame_desc[j].offset = frame_offset; + urb->iso_frame_desc[j].length = frame_size; + frame_offset += frame_size; + } + + if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) { + err("submitting urb %d failed with %d.", i, ret); + goto urb_error; + } + deb_ts("submitted urb no. %d.\n",i); + } + + /* SRAM */ + flexcop_sram_set_dest(fc_usb->fc_dev, FC_SRAM_DEST_MEDIA | + FC_SRAM_DEST_NET | FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, + FC_SRAM_DEST_TARGET_WAN_USB); + flexcop_wan_set_speed(fc_usb->fc_dev, FC_WAN_SPEED_8MBITS); + flexcop_sram_ctrl(fc_usb->fc_dev, 1, 1, 1); + return 0; + +urb_error: + flexcop_usb_transfer_exit(fc_usb); + return ret; +} + +static int flexcop_usb_init(struct flexcop_usb *fc_usb) +{ + /* use the alternate setting with the larges buffer */ + usb_set_interface(fc_usb->udev,0,1); + switch (fc_usb->udev->speed) { + case USB_SPEED_LOW: + err("cannot handle USB speed because it is too slow."); + return -ENODEV; + break; + case USB_SPEED_FULL: + info("running at FULL speed."); + break; + case USB_SPEED_HIGH: + info("running at HIGH speed."); + break; + case USB_SPEED_UNKNOWN: /* fall through */ + default: + err("cannot handle USB speed because it is unknown."); + return -ENODEV; + } + usb_set_intfdata(fc_usb->uintf, fc_usb); + return 0; +} + +static void flexcop_usb_exit(struct flexcop_usb *fc_usb) +{ + usb_set_intfdata(fc_usb->uintf, NULL); +} + +static int flexcop_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct flexcop_usb *fc_usb = NULL; + struct flexcop_device *fc = NULL; + int ret; + + if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) { + err("out of memory\n"); + return -ENOMEM; + } + + /* general flexcop init */ + fc_usb = fc->bus_specific; + fc_usb->fc_dev = fc; + + fc->read_ibi_reg = flexcop_usb_read_ibi_reg; + fc->write_ibi_reg = flexcop_usb_write_ibi_reg; + fc->i2c_request = flexcop_usb_i2c_request; + fc->get_mac_addr = flexcop_usb_get_mac_addr; + + fc->stream_control = flexcop_usb_stream_control; + + fc->pid_filtering = 1; + fc->bus_type = FC_USB; + + fc->dev = &udev->dev; + fc->owner = THIS_MODULE; + + /* bus specific part */ + fc_usb->udev = udev; + fc_usb->uintf = intf; + if ((ret = flexcop_usb_init(fc_usb)) != 0) + goto err_kfree; + + /* init flexcop */ + if ((ret = flexcop_device_initialize(fc)) != 0) + goto err_usb_exit; + + /* xfer init */ + if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0) + goto err_fc_exit; + + info("%s successfully initialized and connected.", DRIVER_NAME); + return 0; + +err_fc_exit: + flexcop_device_exit(fc); +err_usb_exit: + flexcop_usb_exit(fc_usb); +err_kfree: + flexcop_device_kfree(fc); + return ret; +} + +static void flexcop_usb_disconnect(struct usb_interface *intf) +{ + struct flexcop_usb *fc_usb = usb_get_intfdata(intf); + flexcop_usb_transfer_exit(fc_usb); + flexcop_device_exit(fc_usb->fc_dev); + flexcop_usb_exit(fc_usb); + flexcop_device_kfree(fc_usb->fc_dev); + info("%s successfully deinitialized and disconnected.", DRIVER_NAME); +} + +static struct usb_device_id flexcop_usb_table [] = { + { USB_DEVICE(0x0af7, 0x0101) }, + { } +}; +MODULE_DEVICE_TABLE (usb, flexcop_usb_table); + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver flexcop_usb_driver = { + .name = "b2c2_flexcop_usb", + .probe = flexcop_usb_probe, + .disconnect = flexcop_usb_disconnect, + .id_table = flexcop_usb_table, +}; + +module_usb_driver(flexcop_usb_driver); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); |