summaryrefslogtreecommitdiff
path: root/drivers/leds
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/leds')
-rw-r--r--drivers/leds/Kconfig33
-rw-r--r--drivers/leds/Makefile4
-rw-r--r--drivers/leds/leds-adp5520.c230
-rw-r--r--drivers/leds/leds-alix2.c115
-rw-r--r--drivers/leds/leds-cobalt-qube.c4
-rw-r--r--drivers/leds/leds-cobalt-raq.c2
-rw-r--r--drivers/leds/leds-lt3593.c217
-rw-r--r--drivers/leds/leds-pwm.c5
-rw-r--r--drivers/leds/leds-regulator.c242
-rw-r--r--drivers/leds/leds-ss4200.c556
10 files changed, 1371 insertions, 37 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index e4f599f20e38..8a0e1ec95e4a 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -229,6 +229,12 @@ config LEDS_PWM
help
This option enables support for pwm driven LEDs
+config LEDS_REGULATOR
+ tristate "REGULATOR driven LED support"
+ depends on LEDS_CLASS && REGULATOR
+ help
+ This option enables support for regulator driven LEDs.
+
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
depends on LEDS_CLASS && I2C
@@ -236,6 +242,33 @@ config LEDS_BD2802
This option enables support for BD2802GU RGB LED driver chips
accessed via the I2C bus.
+config LEDS_INTEL_SS4200
+ tristate "LED driver for Intel NAS SS4200 series"
+ depends on LEDS_CLASS && PCI && DMI
+ help
+ This option enables support for the Intel SS4200 series of
+ Network Attached Storage servers. You may control the hard
+ drive or power LEDs on the front panel. Using this driver
+ can stop the front LED from blinking after startup.
+
+config LEDS_LT3593
+ tristate "LED driver for LT3593 controllers"
+ depends on LEDS_CLASS && GENERIC_GPIO
+ help
+ This option enables support for LEDs driven by a Linear Technology
+ LT3593 controller. This controller uses a special one-wire pulse
+ coding protocol to set the brightness.
+
+config LEDS_ADP5520
+ tristate "LED Support for ADP5520/ADP5501 PMIC"
+ depends on LEDS_CLASS && PMIC_ADP5520
+ help
+ This option enables support for on-chip LED drivers found
+ on Analog Devices ADP5520/ADP5501 PMICs.
+
+ To compile this driver as a module, choose M here: the module will
+ be called leds-adp5520.
+
comment "LED Triggers"
config LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 46d72704d606..9e63869d7c0d 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -29,6 +29,10 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
+obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
+obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
+obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c
new file mode 100644
index 000000000000..a8f315902131
--- /dev/null
+++ b/drivers/leds/leds-adp5520.c
@@ -0,0 +1,230 @@
+/*
+ * LEDs driver for Analog Devices ADP5520/ADP5501 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Loosely derived from leds-da903x:
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/adp5520.h>
+
+struct adp5520_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct device *master;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+static void adp5520_led_work(struct work_struct *work)
+{
+ struct adp5520_led *led = container_of(work, struct adp5520_led, work);
+ adp5520_write(led->master, ADP5520_LED1_CURRENT + led->id - 1,
+ led->new_brightness >> 2);
+}
+
+static void adp5520_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct adp5520_led *led;
+
+ led = container_of(led_cdev, struct adp5520_led, cdev);
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static int adp5520_led_setup(struct adp5520_led *led)
+{
+ struct device *dev = led->master;
+ int flags = led->flags;
+ int ret = 0;
+
+ switch (led->id) {
+ case FLAG_ID_ADP5520_LED1_ADP5501_LED0:
+ ret |= adp5520_set_bits(dev, ADP5520_LED_TIME,
+ (flags >> ADP5520_FLAG_OFFT_SHIFT) &
+ ADP5520_FLAG_OFFT_MASK);
+ ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_LED1_EN);
+ break;
+ case FLAG_ID_ADP5520_LED2_ADP5501_LED1:
+ ret |= adp5520_set_bits(dev, ADP5520_LED_TIME,
+ ((flags >> ADP5520_FLAG_OFFT_SHIFT) &
+ ADP5520_FLAG_OFFT_MASK) << 2);
+ ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_R3_MODE);
+ ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_LED2_EN);
+ break;
+ case FLAG_ID_ADP5520_LED3_ADP5501_LED2:
+ ret |= adp5520_set_bits(dev, ADP5520_LED_TIME,
+ ((flags >> ADP5520_FLAG_OFFT_SHIFT) &
+ ADP5520_FLAG_OFFT_MASK) << 4);
+ ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_C3_MODE);
+ ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_LED3_EN);
+ break;
+ }
+
+ return ret;
+}
+
+static int __devinit adp5520_led_prepare(struct platform_device *pdev)
+{
+ struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = pdev->dev.parent;
+ int ret = 0;
+
+ ret |= adp5520_write(dev, ADP5520_LED1_CURRENT, 0);
+ ret |= adp5520_write(dev, ADP5520_LED2_CURRENT, 0);
+ ret |= adp5520_write(dev, ADP5520_LED3_CURRENT, 0);
+ ret |= adp5520_write(dev, ADP5520_LED_TIME, pdata->led_on_time << 6);
+ ret |= adp5520_write(dev, ADP5520_LED_FADE, FADE_VAL(pdata->fade_in,
+ pdata->fade_out));
+
+ return ret;
+}
+
+static int __devinit adp5520_led_probe(struct platform_device *pdev)
+{
+ struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data;
+ struct adp5520_led *led, *led_dat;
+ struct led_info *cur_led;
+ int ret, i;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ if (pdata->num_leds > ADP5520_01_MAXLEDS) {
+ dev_err(&pdev->dev, "can't handle more than %d LEDS\n",
+ ADP5520_01_MAXLEDS);
+ return -EFAULT;
+ }
+
+ led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&pdev->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ ret = adp5520_led_prepare(pdev);
+
+ if (ret) {
+ dev_err(&pdev->dev, "failed to write\n");
+ goto err_free;
+ }
+
+ for (i = 0; i < pdata->num_leds; ++i) {
+ cur_led = &pdata->leds[i];
+ led_dat = &led[i];
+
+ led_dat->cdev.name = cur_led->name;
+ led_dat->cdev.default_trigger = cur_led->default_trigger;
+ led_dat->cdev.brightness_set = adp5520_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+
+ if (cur_led->flags & ADP5520_FLAG_LED_MASK)
+ led_dat->flags = cur_led->flags;
+ else
+ led_dat->flags = i + 1;
+
+ led_dat->id = led_dat->flags & ADP5520_FLAG_LED_MASK;
+
+ led_dat->master = pdev->dev.parent;
+ led_dat->new_brightness = LED_OFF;
+
+ INIT_WORK(&led_dat->work, adp5520_led_work);
+
+ ret = led_classdev_register(led_dat->master, &led_dat->cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register LED %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ ret = adp5520_led_setup(led_dat);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to write\n");
+ i++;
+ goto err;
+ }
+ }
+
+ platform_set_drvdata(pdev, led);
+ return 0;
+
+err:
+ if (i > 0) {
+ for (i = i - 1; i >= 0; i--) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+ }
+
+err_free:
+ kfree(led);
+ return ret;
+}
+
+static int __devexit adp5520_led_remove(struct platform_device *pdev)
+{
+ struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data;
+ struct adp5520_led *led;
+ int i;
+
+ led = platform_get_drvdata(pdev);
+
+ adp5520_clr_bits(led->master, ADP5520_LED_CONTROL,
+ ADP5520_LED1_EN | ADP5520_LED2_EN | ADP5520_LED3_EN);
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ kfree(led);
+ return 0;
+}
+
+static struct platform_driver adp5520_led_driver = {
+ .driver = {
+ .name = "adp5520-led",
+ .owner = THIS_MODULE,
+ },
+ .probe = adp5520_led_probe,
+ .remove = __devexit_p(adp5520_led_remove),
+};
+
+static int __init adp5520_led_init(void)
+{
+ return platform_driver_register(&adp5520_led_driver);
+}
+module_init(adp5520_led_init);
+
+static void __exit adp5520_led_exit(void)
+{
+ platform_driver_unregister(&adp5520_led_driver);
+}
+module_exit(adp5520_led_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("LEDS ADP5520(01) Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-led");
diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c
index 731d4eef3425..f59ffadf5125 100644
--- a/drivers/leds/leds-alix2.c
+++ b/drivers/leds/leds-alix2.c
@@ -11,11 +11,24 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/string.h>
+#include <linux/pci.h>
static int force = 0;
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
+#define MSR_LBAR_GPIO 0x5140000C
+#define CS5535_GPIO_SIZE 256
+
+static u32 gpio_base;
+
+static struct pci_device_id divil_pci[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
+ { } /* NULL entry */
+};
+MODULE_DEVICE_TABLE(pci, divil_pci);
+
struct alix_led {
struct led_classdev cdev;
unsigned short port;
@@ -30,9 +43,9 @@ static void alix_led_set(struct led_classdev *led_cdev,
container_of(led_cdev, struct alix_led, cdev);
if (brightness)
- outl(led_dev->on_value, led_dev->port);
+ outl(led_dev->on_value, gpio_base + led_dev->port);
else
- outl(led_dev->off_value, led_dev->port);
+ outl(led_dev->off_value, gpio_base + led_dev->port);
}
static struct alix_led alix_leds[] = {
@@ -41,7 +54,7 @@ static struct alix_led alix_leds[] = {
.name = "alix:1",
.brightness_set = alix_led_set,
},
- .port = 0x6100,
+ .port = 0x00,
.on_value = 1 << 22,
.off_value = 1 << 6,
},
@@ -50,7 +63,7 @@ static struct alix_led alix_leds[] = {
.name = "alix:2",
.brightness_set = alix_led_set,
},
- .port = 0x6180,
+ .port = 0x80,
.on_value = 1 << 25,
.off_value = 1 << 9,
},
@@ -59,7 +72,7 @@ static struct alix_led alix_leds[] = {
.name = "alix:3",
.brightness_set = alix_led_set,
},
- .port = 0x6180,
+ .port = 0x80,
.on_value = 1 << 27,
.off_value = 1 << 11,
},
@@ -101,64 +114,104 @@ static struct platform_driver alix_led_driver = {
},
};
-static int __init alix_present(void)
+static int __init alix_present(unsigned long bios_phys,
+ const char *alix_sig,
+ size_t alix_sig_len)
{
- const unsigned long bios_phys = 0x000f0000;
const size_t bios_len = 0x00010000;
- const char alix_sig[] = "PC Engines ALIX.";
- const size_t alix_sig_len = sizeof(alix_sig) - 1;
-
const char *bios_virt;
const char *scan_end;
const char *p;
- int ret = 0;
+ char name[64];
if (force) {
printk(KERN_NOTICE "%s: forced to skip BIOS test, "
"assume system has ALIX.2 style LEDs\n",
KBUILD_MODNAME);
- ret = 1;
- goto out;
+ return 1;
}
bios_virt = phys_to_virt(bios_phys);
scan_end = bios_virt + bios_len - (alix_sig_len + 2);
for (p = bios_virt; p < scan_end; p++) {
const char *tail;
+ char *a;
- if (memcmp(p, alix_sig, alix_sig_len) != 0) {
+ if (memcmp(p, alix_sig, alix_sig_len) != 0)
continue;
- }
+
+ memcpy(name, p, sizeof(name));
+
+ /* remove the first \0 character from string */
+ a = strchr(name, '\0');
+ if (a)
+ *a = ' ';
+
+ /* cut the string at a newline */
+ a = strchr(name, '\r');
+ if (a)
+ *a = '\0';
tail = p + alix_sig_len;
- if ((tail[0] == '2' || tail[0] == '3') && tail[1] == '\0') {
+ if ((tail[0] == '2' || tail[0] == '3')) {
printk(KERN_INFO
"%s: system is recognized as \"%s\"\n",
- KBUILD_MODNAME, p);
- ret = 1;
- break;
+ KBUILD_MODNAME, name);
+ return 1;
}
}
-out:
- return ret;
+ return 0;
}
static struct platform_device *pdev;
-static int __init alix_led_init(void)
+static int __init alix_pci_led_init(void)
{
- int ret;
+ u32 low, hi;
- if (!alix_present()) {
- ret = -ENODEV;
- goto out;
+ if (pci_dev_present(divil_pci) == 0) {
+ printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n");
+ return -ENODEV;
}
- /* enable output on GPIO for LED 1,2,3 */
- outl(1 << 6, 0x6104);
- outl(1 << 9, 0x6184);
- outl(1 << 11, 0x6184);
+ /* Grab the GPIO I/O range */
+ rdmsr(MSR_LBAR_GPIO, low, hi);
+
+ /* Check the mask and whether GPIO is enabled (sanity check) */
+ if (hi != 0x0000f001) {
+ printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n");
+ return -ENODEV;
+ }
+
+ /* Mask off the IO base address */
+ gpio_base = low & 0x0000ff00;
+
+ if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) {
+ printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n");
+ return -ENODEV;
+ }
+
+ /* Set GPIO function to output */
+ outl(1 << 6, gpio_base + 0x04);
+ outl(1 << 9, gpio_base + 0x84);
+ outl(1 << 11, gpio_base + 0x84);
+
+ return 0;
+}
+
+static int __init alix_led_init(void)
+{
+ int ret = -ENODEV;
+ const char tinybios_sig[] = "PC Engines ALIX.";
+ const char coreboot_sig[] = "PC Engines\0ALIX.";
+
+ if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
+ alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
+ ret = alix_pci_led_init();
+
+ if (ret < 0)
+ return ret;
pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
if (!IS_ERR(pdev)) {
@@ -168,7 +221,6 @@ static int __init alix_led_init(void)
} else
ret = PTR_ERR(pdev);
-out:
return ret;
}
@@ -176,6 +228,7 @@ static void __exit alix_led_exit(void)
{
platform_device_unregister(pdev);
platform_driver_unregister(&alix_led_driver);
+ release_region(gpio_base, CS5535_GPIO_SIZE);
}
module_init(alix_led_init);
diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c
index 8816806accd2..da5fb016b1a5 100644
--- a/drivers/leds/leds-cobalt-qube.c
+++ b/drivers/leds/leds-cobalt-qube.c
@@ -31,7 +31,7 @@ static struct led_classdev qube_front_led = {
.name = "qube::front",
.brightness = LED_FULL,
.brightness_set = qube_front_led_set,
- .default_trigger = "ide-disk",
+ .default_trigger = "default-on",
};
static int __devinit cobalt_qube_led_probe(struct platform_device *pdev)
@@ -43,7 +43,7 @@ static int __devinit cobalt_qube_led_probe(struct platform_device *pdev)
if (!res)
return -EBUSY;
- led_port = ioremap(res->start, res->end - res->start + 1);
+ led_port = ioremap(res->start, resource_size(res));
if (!led_port)
return -ENOMEM;
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index defc212105f3..438d48384636 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -84,7 +84,7 @@ static int __devinit cobalt_raq_led_probe(struct platform_device *pdev)
if (!res)
return -EBUSY;
- led_port = ioremap(res->start, res->end - res->start + 1);
+ led_port = ioremap(res->start, resource_size(res));
if (!led_port)
return -ENOMEM;
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
new file mode 100644
index 000000000000..fee40a841959
--- /dev/null
+++ b/drivers/leds/leds-lt3593.c
@@ -0,0 +1,217 @@
+/*
+ * LEDs driver for LT3593 controllers
+ *
+ * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on leds-gpio.c,
+ *
+ * Copyright (C) 2007 8D Technologies inc.
+ * Raphael Assenat <raph@8d.com>
+ * Copyright (C) 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+struct lt3593_led_data {
+ struct led_classdev cdev;
+ unsigned gpio;
+ struct work_struct work;
+ u8 new_level;
+};
+
+static void lt3593_led_work(struct work_struct *work)
+{
+ int pulses;
+ struct lt3593_led_data *led_dat =
+ container_of(work, struct lt3593_led_data, work);
+
+ /*
+ * The LT3593 resets its internal current level register to the maximum
+ * level on the first falling edge on the control pin. Each following
+ * falling edge decreases the current level by 625uA. Up to 32 pulses
+ * can be sent, so the maximum power reduction is 20mA.
+ * After a timeout of 128us, the value is taken from the register and
+ * applied is to the output driver.
+ */
+
+ if (led_dat->new_level == 0) {
+ gpio_set_value_cansleep(led_dat->gpio, 0);
+ return;
+ }
+
+ pulses = 32 - (led_dat->new_level * 32) / 255;
+
+ if (pulses == 0) {
+ gpio_set_value_cansleep(led_dat->gpio, 0);
+ mdelay(1);
+ gpio_set_value_cansleep(led_dat->gpio, 1);
+ return;
+ }
+
+ gpio_set_value_cansleep(led_dat->gpio, 1);
+
+ while (pulses--) {
+ gpio_set_value_cansleep(led_dat->gpio, 0);
+ udelay(1);
+ gpio_set_value_cansleep(led_dat->gpio, 1);
+ udelay(1);
+ }
+}
+
+static void lt3593_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct lt3593_led_data *led_dat =
+ container_of(led_cdev, struct lt3593_led_data, cdev);
+
+ led_dat->new_level = value;
+ schedule_work(&led_dat->work);
+}
+
+static int __devinit create_lt3593_led(const struct gpio_led *template,
+ struct lt3593_led_data *led_dat, struct device *parent)
+{
+ int ret, state;
+
+ /* skip leds on GPIOs that aren't available */
+ if (!gpio_is_valid(template->gpio)) {
+ printk(KERN_INFO "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n",
+ KBUILD_MODNAME, template->gpio, template->name);
+ return 0;
+ }
+
+ ret = gpio_request(template->gpio, template->name);
+ if (ret < 0)
+ return ret;
+
+ led_dat->cdev.name = template->name;
+ led_dat->cdev.default_trigger = template->default_trigger;
+ led_dat->gpio = template->gpio;
+
+ led_dat->cdev.brightness_set = lt3593_led_set;
+
+ state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+ led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
+
+ if (!template->retain_state_suspended)
+ led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+
+ ret = gpio_direction_output(led_dat->gpio, state);
+ if (ret < 0)
+ goto err;
+
+ INIT_WORK(&led_dat->work, lt3593_led_work);
+
+ ret = led_classdev_register(parent, &led_dat->cdev);
+ if (ret < 0)
+ goto err;
+
+ printk(KERN_INFO "%s: registered LT3593 LED '%s' at GPIO %d\n",
+ KBUILD_MODNAME, template->name, template->gpio);
+
+ return 0;
+
+err:
+ gpio_free(led_dat->gpio);
+ return ret;
+}
+
+static void delete_lt3593_led(struct lt3593_led_data *led)
+{
+ if (!gpio_is_valid(led->gpio))
+ return;
+
+ led_classdev_unregister(&led->cdev);
+ cancel_work_sync(&led->work);
+ gpio_free(led->gpio);
+}
+
+static int __devinit lt3593_led_probe(struct platform_device *pdev)
+{
+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
+ struct lt3593_led_data *leds_data;
+ int i, ret = 0;
+
+ if (!pdata)
+ return -EBUSY;
+
+ leds_data = kzalloc(sizeof(struct lt3593_led_data) * pdata->num_leds,
+ GFP_KERNEL);
+ if (!leds_data)
+ return -ENOMEM;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ ret = create_lt3593_led(&pdata->leds[i], &leds_data[i],
+ &pdev->dev);
+ if (ret < 0)
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, leds_data);
+
+ return 0;
+
+err:
+ for (i = i - 1; i >= 0; i--)
+ delete_lt3593_led(&leds_data[i]);
+
+ kfree(leds_data);
+
+ return ret;
+}
+
+static int __devexit lt3593_led_remove(struct platform_device *pdev)
+{
+ int i;
+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
+ struct lt3593_led_data *leds_data;
+
+ leds_data = platform_get_drvdata(pdev);
+
+ for (i = 0; i < pdata->num_leds; i++)
+ delete_lt3593_led(&leds_data[i]);
+
+ kfree(leds_data);
+
+ return 0;
+}
+
+static struct platform_driver lt3593_led_driver = {
+ .probe = lt3593_led_probe,
+ .remove = __devexit_p(lt3593_led_remove),
+ .driver = {
+ .name = "leds-lt3593",
+ .owner = THIS_MODULE,
+ },
+};
+
+MODULE_ALIAS("platform:leds-lt3593");
+
+static int __init lt3593_led_init(void)
+{
+ return platform_driver_register(&lt3593_led_driver);
+}
+
+static void __exit lt3593_led_exit(void)
+{
+ platform_driver_unregister(&lt3593_led_driver);
+}
+
+module_init(lt3593_led_init);
+module_exit(lt3593_led_exit);
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("LED driver for LT3593 controllers");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index cdfdc8714e10..88b1dd091cfb 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -27,7 +27,6 @@ struct led_pwm_data {
struct pwm_device *pwm;
unsigned int active_low;
unsigned int period;
- unsigned int max_brightness;
};
static void led_pwm_set(struct led_classdev *led_cdev,
@@ -35,7 +34,7 @@ static void led_pwm_set(struct led_classdev *led_cdev,
{
struct led_pwm_data *led_dat =
container_of(led_cdev, struct led_pwm_data, cdev);
- unsigned int max = led_dat->max_brightness;
+ unsigned int max = led_dat->cdev.max_brightness;
unsigned int period = led_dat->period;
if (brightness == 0) {
@@ -77,10 +76,10 @@ static int led_pwm_probe(struct platform_device *pdev)
led_dat->cdev.name = cur_led->name;
led_dat->cdev.default_trigger = cur_led->default_trigger;
led_dat->active_low = cur_led->active_low;
- led_dat->max_brightness = cur_led->max_brightness;
led_dat->period = cur_led->pwm_period_ns;
led_dat->cdev.brightness_set = led_pwm_set;
led_dat->cdev.brightness = LED_OFF;
+ led_dat->cdev.max_brightness = cur_led->max_brightness;
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c
new file mode 100644
index 000000000000..7f00de3ef922
--- /dev/null
+++ b/drivers/leds/leds-regulator.c
@@ -0,0 +1,242 @@
+/*
+ * leds-regulator.c - LED class driver for regulator driven LEDs.
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * Inspired by leds-wm8350 driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/leds.h>
+#include <linux/leds-regulator.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define to_regulator_led(led_cdev) \
+ container_of(led_cdev, struct regulator_led, cdev)
+
+struct regulator_led {
+ struct led_classdev cdev;
+ enum led_brightness value;
+ int enabled;
+ struct mutex mutex;
+ struct work_struct work;
+
+ struct regulator *vcc;
+};
+
+static inline int led_regulator_get_max_brightness(struct regulator *supply)
+{
+ int ret;
+ int voltage = regulator_list_voltage(supply, 0);
+
+ if (voltage <= 0)
+ return 1;
+
+ /* even if regulator can't change voltages,
+ * we still assume it can change status
+ * and the LED can be turned on and off.
+ */
+ ret = regulator_set_voltage(supply, voltage, voltage);
+ if (ret < 0)
+ return 1;
+
+ return regulator_count_voltages(supply);
+}
+
+static int led_regulator_get_voltage(struct regulator *supply,
+ enum led_brightness brightness)
+{
+ if (brightness == 0)
+ return -EINVAL;
+
+ return regulator_list_voltage(supply, brightness - 1);
+}
+
+
+static void regulator_led_enable(struct regulator_led *led)
+{
+ int ret;
+
+ if (led->enabled)
+ return;
+
+ ret = regulator_enable(led->vcc);
+ if (ret != 0) {
+ dev_err(led->cdev.dev, "Failed to enable vcc: %d\n", ret);
+ return;
+ }
+
+ led->enabled = 1;
+}
+
+static void regulator_led_disable(struct regulator_led *led)
+{
+ int ret;
+
+ if (!led->enabled)
+ return;
+
+ ret = regulator_disable(led->vcc);
+ if (ret != 0) {
+ dev_err(led->cdev.dev, "Failed to disable vcc: %d\n", ret);
+ return;
+ }
+
+ led->enabled = 0;
+}
+
+static void regulator_led_set_value(struct regulator_led *led)
+{
+ int voltage;
+ int ret;
+
+ mutex_lock(&led->mutex);
+
+ if (led->value == LED_OFF) {
+ regulator_led_disable(led);
+ goto out;
+ }
+
+ if (led->cdev.max_brightness > 1) {
+ voltage = led_regulator_get_voltage(led->vcc, led->value);
+ dev_dbg(led->cdev.dev, "brightness: %d voltage: %d\n",
+ led->value, voltage);
+
+ ret = regulator_set_voltage(led->vcc, voltage, voltage);
+ if (ret != 0)
+ dev_err(led->cdev.dev, "Failed to set voltage %d: %d\n",
+ voltage, ret);
+ }
+
+ regulator_led_enable(led);
+
+out:
+ mutex_unlock(&led->mutex);
+}
+
+static void led_work(struct work_struct *work)
+{
+ struct regulator_led *led;
+
+ led = container_of(work, struct regulator_led, work);
+ regulator_led_set_value(led);
+}
+
+static void regulator_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct regulator_led *led = to_regulator_led(led_cdev);
+
+ led->value = value;
+ schedule_work(&led->work);
+}
+
+static int __devinit regulator_led_probe(struct platform_device *pdev)
+{
+ struct led_regulator_platform_data *pdata = pdev->dev.platform_data;
+ struct regulator_led *led;
+ struct regulator *vcc;
+ int ret = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ vcc = regulator_get_exclusive(&pdev->dev, "vled");
+ if (IS_ERR(vcc)) {
+ dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name);
+ return PTR_ERR(vcc);
+ }
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (led == NULL) {
+ ret = -ENOMEM;
+ goto err_vcc;
+ }
+
+ led->cdev.max_brightness = led_regulator_get_max_brightness(vcc);
+ if (pdata->brightness > led->cdev.max_brightness) {
+ dev_err(&pdev->dev, "Invalid default brightness %d\n",
+ pdata->brightness);
+ ret = -EINVAL;
+ goto err_led;
+ }
+ led->value = pdata->brightness;
+
+ led->cdev.brightness_set = regulator_led_brightness_set;
+ led->cdev.name = pdata->name;
+ led->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led->vcc = vcc;
+
+ mutex_init(&led->mutex);
+ INIT_WORK(&led->work, led_work);
+
+ platform_set_drvdata(pdev, led);
+
+ ret = led_classdev_register(&pdev->dev, &led->cdev);
+ if (ret < 0) {
+ cancel_work_sync(&led->work);
+ goto err_led;
+ }
+
+ /* to expose the default value to userspace */
+ led->cdev.brightness = led->value;
+
+ /* Set the default led status */
+ regulator_led_set_value(led);
+
+ return 0;
+
+err_led:
+ kfree(led);
+err_vcc:
+ regulator_put(vcc);
+ return ret;
+}
+
+static int __devexit regulator_led_remove(struct platform_device *pdev)
+{
+ struct regulator_led *led = platform_get_drvdata(pdev);
+
+ led_classdev_unregister(&led->cdev);
+ cancel_work_sync(&led->work);
+ regulator_led_disable(led);
+ regulator_put(led->vcc);
+ kfree(led);
+ return 0;
+}
+
+static struct platform_driver regulator_led_driver = {
+ .driver = {
+ .name = "leds-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = regulator_led_probe,
+ .remove = __devexit_p(regulator_led_remove),
+};
+
+static int __init regulator_led_init(void)
+{
+ return platform_driver_register(&regulator_led_driver);
+}
+module_init(regulator_led_init);
+
+static void __exit regulator_led_exit(void)
+{
+ platform_driver_unregister(&regulator_led_driver);
+}
+module_exit(regulator_led_exit);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("Regulator driven LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-regulator");
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
new file mode 100644
index 000000000000..97f04984c1ca
--- /dev/null
+++ b/drivers/leds/leds-ss4200.c
@@ -0,0 +1,556 @@
+/*
+ * SS4200-E Hardware API
+ * Copyright (c) 2009, Intel Corporation.
+ * Copyright IBM Corporation, 2009
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Author: Dave Hansen <dave@sr71.net>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/dmi.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+MODULE_AUTHOR("Rodney Girod <rgirod@confocus.com>, Dave Hansen <dave@sr71.net>");
+MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * ICH7 LPC/GPIO PCI Config register offsets
+ */
+#define PMBASE 0x040
+#define GPIO_BASE 0x048
+#define GPIO_CTRL 0x04c
+#define GPIO_EN 0x010
+
+/*
+ * The ICH7 GPIO register block is 64 bytes in size.
+ */
+#define ICH7_GPIO_SIZE 64
+
+/*
+ * Define register offsets within the ICH7 register block.
+ */
+#define GPIO_USE_SEL 0x000
+#define GP_IO_SEL 0x004
+#define GP_LVL 0x00c
+#define GPO_BLINK 0x018
+#define GPI_INV 0x030
+#define GPIO_USE_SEL2 0x034
+#define GP_IO_SEL2 0x038
+#define GP_LVL2 0x03c
+
+/*
+ * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
+ */
+static struct pci_device_id ich7_lpc_pci_id[] =
+{
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
+ { } /* NULL entry */
+};
+
+MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id);
+
+static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
+{
+ pr_info("detected '%s'\n", id->ident);
+ return 1;
+}
+
+static unsigned int __initdata nodetect;
+module_param_named(nodetect, nodetect, bool, 0);
+MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");
+
+/*
+ * struct nas_led_whitelist - List of known good models
+ *
+ * Contains the known good models this driver is compatible with.
+ * When adding a new model try to be as strict as possible. This
+ * makes it possible to keep the false positives (the model is
+ * detected as working, but in reality it is not) as low as
+ * possible.
+ */
+static struct dmi_system_id __initdata nas_led_whitelist[] = {
+ {
+ .callback = ss4200_led_dmi_callback,
+ .ident = "Intel SS4200-E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
+ }
+ },
+};
+
+/*
+ * Base I/O address assigned to the Power Management register block
+ */
+static u32 g_pm_io_base;
+
+/*
+ * Base I/O address assigned to the ICH7 GPIO register block
+ */
+static u32 nas_gpio_io_base;
+
+/*
+ * When we successfully register a region, we are returned a resource.
+ * We use these to identify which regions we need to release on our way
+ * back out.
+ */
+static struct resource *gp_gpio_resource;
+
+struct nasgpio_led {
+ char *name;
+ u32 gpio_bit;
+ struct led_classdev led_cdev;
+};
+
+/*
+ * gpio_bit(s) are the ICH7 GPIO bit assignments
+ */
+static struct nasgpio_led nasgpio_leds[] = {
+ { .name = "hdd1:blue:sata", .gpio_bit = 0 },
+ { .name = "hdd1:amber:sata", .gpio_bit = 1 },
+ { .name = "hdd2:blue:sata", .gpio_bit = 2 },
+ { .name = "hdd2:amber:sata", .gpio_bit = 3 },
+ { .name = "hdd3:blue:sata", .gpio_bit = 4 },
+ { .name = "hdd3:amber:sata", .gpio_bit = 5 },
+ { .name = "hdd4:blue:sata", .gpio_bit = 6 },
+ { .name = "hdd4:amber:sata", .gpio_bit = 7 },
+ { .name = "power:blue:power", .gpio_bit = 27},
+ { .name = "power:amber:power", .gpio_bit = 28},
+};
+
+#define NAS_RECOVERY 0x00000400 /* GPIO10 */
+
+static struct nasgpio_led *
+led_classdev_to_nasgpio_led(struct led_classdev *led_cdev)
+{
+ return container_of(led_cdev, struct nasgpio_led, led_cdev);
+}
+
+static struct nasgpio_led *get_led_named(char *name)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
+ if (strcmp(nasgpio_leds[i].name, name))
+ continue;
+ return &nasgpio_leds[i];
+ }
+ return NULL;
+}
+
+/*
+ * This protects access to the gpio ports.
+ */
+static DEFINE_SPINLOCK(nasgpio_gpio_lock);
+
+/*
+ * There are two gpio ports, one for blinking and the other
+ * for power. @port tells us if we're doing blinking or
+ * power control.
+ *
+ * Caller must hold nasgpio_gpio_lock
+ */
+static void __nasgpio_led_set_attr(struct led_classdev *led_cdev,
+ u32 port, u32 value)
+{
+ struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
+ u32 gpio_out;
+
+ gpio_out = inl(nas_gpio_io_base + port);
+ if (value)
+ gpio_out |= (1<<led->gpio_bit);
+ else
+ gpio_out &= ~(1<<led->gpio_bit);
+
+ outl(gpio_out, nas_gpio_io_base + port);
+}
+
+static void nasgpio_led_set_attr(struct led_classdev *led_cdev,
+ u32 port, u32 value)
+{
+ spin_lock(&nasgpio_gpio_lock);
+ __nasgpio_led_set_attr(led_cdev, port, value);
+ spin_unlock(&nasgpio_gpio_lock);
+}
+
+u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port)
+{
+ struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
+ u32 gpio_in;
+
+ spin_lock(&nasgpio_gpio_lock);
+ gpio_in = inl(nas_gpio_io_base + port);
+ spin_unlock(&nasgpio_gpio_lock);
+ if (gpio_in & (1<<led->gpio_bit))
+ return 1;
+ return 0;
+}
+
+/*
+ * There is actual brightness control in the hardware,
+ * but it is via smbus commands and not implemented
+ * in this driver.
+ */
+static void nasgpio_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ u32 setting = 0;
+ if (brightness >= LED_HALF)
+ setting = 1;
+ /*
+ * Hold the lock across both operations. This ensures
+ * consistency so that both the "turn off blinking"
+ * and "turn light off" operations complete as a set.
+ */
+ spin_lock(&nasgpio_gpio_lock);
+ /*
+ * LED class documentation asks that past blink state
+ * be disabled when brightness is turned to zero.
+ */
+ if (brightness == 0)
+ __nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0);
+ __nasgpio_led_set_attr(led_cdev, GP_LVL, setting);
+ spin_unlock(&nasgpio_gpio_lock);
+}
+
+static int nasgpio_led_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ u32 setting = 1;
+ if (!(*delay_on == 0 && *delay_off == 0) &&
+ !(*delay_on == 500 && *delay_off == 500))
+ return -EINVAL;
+ /*
+ * These are very approximate.
+ */
+ *delay_on = 500;
+ *delay_off = 500;
+
+ nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting);
+
+ return 0;
+}
+
+
+/*
+ * Initialize the ICH7 GPIO registers for NAS usage. The BIOS should have
+ * already taken care of this, but we will do so in a non destructive manner
+ * so that we have what we need whether the BIOS did it or not.
+ */
+static int __devinit ich7_gpio_init(struct device *dev)
+{
+ int i;
+ u32 config_data = 0;
+ u32 all_nas_led = 0;
+
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
+ all_nas_led |= (1<<nasgpio_leds[i].gpio_bit);
+
+ spin_lock(&nasgpio_gpio_lock);
+ /*
+ * We need to enable all of the GPIO lines used by the NAS box,
+ * so we will read the current Use Selection and add our usage
+ * to it. This should be benign with regard to the original
+ * BIOS configuration.
+ */
+ config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
+ dev_dbg(dev, ": Data read from GPIO_USE_SEL = 0x%08x\n", config_data);
+ config_data |= all_nas_led + NAS_RECOVERY;
+ outl(config_data, nas_gpio_io_base + GPIO_USE_SEL);
+ config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
+ dev_dbg(dev, ": GPIO_USE_SEL = 0x%08x\n\n", config_data);
+
+ /*
+ * The LED GPIO outputs need to be configured for output, so we
+ * will ensure that all LED lines are cleared for output and the
+ * RECOVERY line ready for input. This too should be benign with
+ * regard to BIOS configuration.
+ */
+ config_data = inl(nas_gpio_io_base + GP_IO_SEL);
+ dev_dbg(dev, ": Data read from GP_IO_SEL = 0x%08x\n",
+ config_data);
+ config_data &= ~all_nas_led;
+ config_data |= NAS_RECOVERY;
+ outl(config_data, nas_gpio_io_base + GP_IO_SEL);
+ config_data = inl(nas_gpio_io_base + GP_IO_SEL);
+ dev_dbg(dev, ": GP_IO_SEL = 0x%08x\n", config_data);
+
+ /*
+ * In our final system, the BIOS will initialize the state of all
+ * of the LEDs. For now, we turn them all off (or Low).
+ */
+ config_data = inl(nas_gpio_io_base + GP_LVL);
+ dev_dbg(dev, ": Data read from GP_LVL = 0x%08x\n", config_data);
+ /*
+ * In our final system, the BIOS will initialize the blink state of all
+ * of the LEDs. For now, we turn blink off for all of them.
+ */
+ config_data = inl(nas_gpio_io_base + GPO_BLINK);
+ dev_dbg(dev, ": Data read from GPO_BLINK = 0x%08x\n", config_data);
+
+ /*
+ * At this moment, I am unsure if anything needs to happen with GPI_INV
+ */
+ config_data = inl(nas_gpio_io_base + GPI_INV);
+ dev_dbg(dev, ": Data read from GPI_INV = 0x%08x\n", config_data);
+
+ spin_unlock(&nasgpio_gpio_lock);
+ return 0;
+}
+
+static void ich7_lpc_cleanup(struct device *dev)
+{
+ /*
+ * If we were given exclusive use of the GPIO
+ * I/O Address range, we must return it.
+ */
+ if (gp_gpio_resource) {
+ dev_dbg(dev, ": Releasing GPIO I/O addresses\n");
+ release_region(nas_gpio_io_base, ICH7_GPIO_SIZE);
+ gp_gpio_resource = NULL;
+ }
+}
+
+/*
+ * The OS has determined that the LPC of the Intel ICH7 Southbridge is present
+ * so we can retrive the required operational information and prepare the GPIO.
+ */
+static struct pci_dev *nas_gpio_pci_dev;
+static int __devinit ich7_lpc_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int status;
+ u32 gc = 0;
+
+ status = pci_enable_device(dev);
+ if (status) {
+ dev_err(&dev->dev, "pci_enable_device failed\n");
+ return -EIO;
+ }
+
+ nas_gpio_pci_dev = dev;
+ status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base);
+ if (status)
+ goto out;
+ g_pm_io_base &= 0x00000ff80;
+
+ status = pci_read_config_dword(dev, GPIO_CTRL, &gc);
+ if (!(GPIO_EN & gc)) {
+ status = -EEXIST;
+ dev_info(&dev->dev,
+ "ERROR: The LPC GPIO Block has not been enabled.\n");
+ goto out;
+ }
+
+ status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base);
+ if (0 > status) {
+ dev_info(&dev->dev, "Unable to read GPIOBASE.\n");
+ goto out;
+ }
+ dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base);
+ nas_gpio_io_base &= 0x00000ffc0;
+
+ /*
+ * Insure that we have exclusive access to the GPIO I/O address range.
+ */
+ gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE,
+ KBUILD_MODNAME);
+ if (NULL == gp_gpio_resource) {
+ dev_info(&dev->dev,
+ "ERROR Unable to register GPIO I/O addresses.\n");
+ status = -1;
+ goto out;
+ }
+
+ /*
+ * Initialize the GPIO for NAS/Home Server Use
+ */
+ ich7_gpio_init(&dev->dev);
+
+out:
+ if (status) {
+ ich7_lpc_cleanup(&dev->dev);
+ pci_disable_device(dev);
+ }
+ return status;
+}
+
+static void ich7_lpc_remove(struct pci_dev *dev)
+{
+ ich7_lpc_cleanup(&dev->dev);
+ pci_disable_device(dev);
+}
+
+/*
+ * pci_driver structure passed to the PCI modules
+ */
+static struct pci_driver nas_gpio_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ich7_lpc_pci_id,
+ .probe = ich7_lpc_probe,
+ .remove = ich7_lpc_remove,
+};
+
+static struct led_classdev *get_classdev_for_led_nr(int nr)
+{
+ struct nasgpio_led *nas_led = &nasgpio_leds[nr];
+ struct led_classdev *led = &nas_led->led_cdev;
+ return led;
+}
+
+
+static void set_power_light_amber_noblink(void)
+{
+ struct nasgpio_led *amber = get_led_named("power:amber:power");
+ struct nasgpio_led *blue = get_led_named("power:blue:power");
+
+ if (!amber || !blue)
+ return;
+ /*
+ * LED_OFF implies disabling future blinking
+ */
+ pr_debug("setting blue off and amber on\n");
+
+ nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF);
+ nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL);
+}
+
+static ssize_t nas_led_blink_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ int blinking = 0;
+ if (nasgpio_led_get_attr(led, GPO_BLINK))
+ blinking = 1;
+ return sprintf(buf, "%u\n", blinking);
+}
+
+static ssize_t nas_led_blink_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret;
+ struct led_classdev *led = dev_get_drvdata(dev);
+ unsigned long blink_state;
+
+ ret = strict_strtoul(buf, 10, &blink_state);
+ if (ret)
+ return ret;
+
+ nasgpio_led_set_attr(led, GPO_BLINK, blink_state);
+
+ return size;
+}
+
+static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store);
+
+static int register_nasgpio_led(int led_nr)
+{
+ int ret;
+ struct nasgpio_led *nas_led = &nasgpio_leds[led_nr];
+ struct led_classdev *led = get_classdev_for_led_nr(led_nr);
+
+ led->name = nas_led->name;
+ led->brightness = LED_OFF;
+ if (nasgpio_led_get_attr(led, GP_LVL))
+ led->brightness = LED_FULL;
+ led->brightness_set = nasgpio_led_set_brightness;
+ led->blink_set = nasgpio_led_set_blink;
+ ret = led_classdev_register(&nas_gpio_pci_dev->dev, led);
+ if (ret)
+ return ret;
+ ret = device_create_file(led->dev, &dev_attr_blink);
+ if (ret)
+ led_classdev_unregister(led);
+ return ret;
+}
+
+static void unregister_nasgpio_led(int led_nr)
+{
+ struct led_classdev *led = get_classdev_for_led_nr(led_nr);
+ led_classdev_unregister(led);
+ device_remove_file(led->dev, &dev_attr_blink);
+}
+/*
+ * module load/initialization
+ */
+static int __init nas_gpio_init(void)
+{
+ int i;
+ int ret = 0;
+ int nr_devices = 0;
+
+ nr_devices = dmi_check_system(nas_led_whitelist);
+ if (nodetect) {
+ pr_info("skipping hardware autodetection\n");
+ pr_info("Please send 'dmidecode' output to dave@sr71.net\n");
+ nr_devices++;
+ }
+
+ if (nr_devices <= 0) {
+ pr_info("no LED devices found\n");
+ return -ENODEV;
+ }
+
+ pr_info("registering PCI driver\n");
+ ret = pci_register_driver(&nas_gpio_pci_driver);
+ if (ret)
+ return ret;
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
+ ret = register_nasgpio_led(i);
+ if (ret)
+ goto out_err;
+ }
+ /*
+ * When the system powers on, the BIOS leaves the power
+ * light blue and blinking. This will turn it solid
+ * amber once the driver is loaded.
+ */
+ set_power_light_amber_noblink();
+ return 0;
+out_err:
+ for (; i >= 0; i--)
+ unregister_nasgpio_led(i);
+ pci_unregister_driver(&nas_gpio_pci_driver);
+ return ret;
+}
+
+/*
+ * module unload
+ */
+static void __exit nas_gpio_exit(void)
+{
+ int i;
+ pr_info("Unregistering driver\n");
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
+ unregister_nasgpio_led(i);
+ pci_unregister_driver(&nas_gpio_pci_driver);
+}
+
+module_init(nas_gpio_init);
+module_exit(nas_gpio_exit);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 19:51:49 +0000