diff options
Diffstat (limited to 'drivers/firmware/ti_sci.c')
| -rw-r--r-- | drivers/firmware/ti_sci.c | 1991 |
1 files changed, 1991 insertions, 0 deletions
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c new file mode 100644 index 000000000000..874ff32db366 --- /dev/null +++ b/drivers/firmware/ti_sci.c @@ -0,0 +1,1991 @@ +/* + * Texas Instruments System Control Interface Protocol Driver + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/bitmap.h> +#include <linux/debugfs.h> +#include <linux/export.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mailbox_client.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/semaphore.h> +#include <linux/slab.h> +#include <linux/soc/ti/ti-msgmgr.h> +#include <linux/soc/ti/ti_sci_protocol.h> +#include <linux/reboot.h> + +#include "ti_sci.h" + +/* List of all TI SCI devices active in system */ +static LIST_HEAD(ti_sci_list); +/* Protection for the entire list */ +static DEFINE_MUTEX(ti_sci_list_mutex); + +/** + * struct ti_sci_xfer - Structure representing a message flow + * @tx_message: Transmit message + * @rx_len: Receive message length + * @xfer_buf: Preallocated buffer to store receive message + * Since we work with request-ACK protocol, we can + * reuse the same buffer for the rx path as we + * use for the tx path. + * @done: completion event + */ +struct ti_sci_xfer { + struct ti_msgmgr_message tx_message; + u8 rx_len; + u8 *xfer_buf; + struct completion done; +}; + +/** + * struct ti_sci_xfers_info - Structure to manage transfer information + * @sem_xfer_count: Counting Semaphore for managing max simultaneous + * Messages. + * @xfer_block: Preallocated Message array + * @xfer_alloc_table: Bitmap table for allocated messages. + * Index of this bitmap table is also used for message + * sequence identifier. + * @xfer_lock: Protection for message allocation + */ +struct ti_sci_xfers_info { + struct semaphore sem_xfer_count; + struct ti_sci_xfer *xfer_block; + unsigned long *xfer_alloc_table; + /* protect transfer allocation */ + spinlock_t xfer_lock; +}; + +/** + * struct ti_sci_desc - Description of SoC integration + * @host_id: Host identifier representing the compute entity + * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds) + * @max_msgs: Maximum number of messages that can be pending + * simultaneously in the system + * @max_msg_size: Maximum size of data per message that can be handled. + */ +struct ti_sci_desc { + u8 host_id; + int max_rx_timeout_ms; + int max_msgs; + int max_msg_size; +}; + +/** + * struct ti_sci_info - Structure representing a TI SCI instance + * @dev: Device pointer + * @desc: SoC description for this instance + * @nb: Reboot Notifier block + * @d: Debugfs file entry + * @debug_region: Memory region where the debug message are available + * @debug_region_size: Debug region size + * @debug_buffer: Buffer allocated to copy debug messages. + * @handle: Instance of TI SCI handle to send to clients. + * @cl: Mailbox Client + * @chan_tx: Transmit mailbox channel + * @chan_rx: Receive mailbox channel + * @minfo: Message info + * @node: list head + * @users: Number of users of this instance + */ +struct ti_sci_info { + struct device *dev; + struct notifier_block nb; + const struct ti_sci_desc *desc; + struct dentry *d; + void __iomem *debug_region; + char *debug_buffer; + size_t debug_region_size; + struct ti_sci_handle handle; + struct mbox_client cl; + struct mbox_chan *chan_tx; + struct mbox_chan *chan_rx; + struct ti_sci_xfers_info minfo; + struct list_head node; + /* protected by ti_sci_list_mutex */ + int users; + +}; + +#define cl_to_ti_sci_info(c) container_of(c, struct ti_sci_info, cl) +#define handle_to_ti_sci_info(h) container_of(h, struct ti_sci_info, handle) +#define reboot_to_ti_sci_info(n) container_of(n, struct ti_sci_info, nb) + +#ifdef CONFIG_DEBUG_FS + +/** + * ti_sci_debug_show() - Helper to dump the debug log + * @s: sequence file pointer + * @unused: unused. + * + * Return: 0 + */ +static int ti_sci_debug_show(struct seq_file *s, void *unused) +{ + struct ti_sci_info *info = s->private; + + memcpy_fromio(info->debug_buffer, info->debug_region, + info->debug_region_size); + /* + * We don't trust firmware to leave NULL terminated last byte (hence + * we have allocated 1 extra 0 byte). Since we cannot guarantee any + * specific data format for debug messages, We just present the data + * in the buffer as is - we expect the messages to be self explanatory. + */ + seq_puts(s, info->debug_buffer); + return 0; +} + +/** + * ti_sci_debug_open() - debug file open + * @inode: inode pointer + * @file: file pointer + * + * Return: result of single_open + */ +static int ti_sci_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, ti_sci_debug_show, inode->i_private); +} + +/* log file operations */ +static const struct file_operations ti_sci_debug_fops = { + .open = ti_sci_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * ti_sci_debugfs_create() - Create log debug file + * @pdev: platform device pointer + * @info: Pointer to SCI entity information + * + * Return: 0 if all went fine, else corresponding error. + */ +static int ti_sci_debugfs_create(struct platform_device *pdev, + struct ti_sci_info *info) +{ + struct device *dev = &pdev->dev; + struct resource *res; + char debug_name[50] = "ti_sci_debug@"; + + /* Debug region is optional */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "debug_messages"); + info->debug_region = devm_ioremap_resource(dev, res); + if (IS_ERR(info->debug_region)) + return 0; + info->debug_region_size = resource_size(res); + + info->debug_buffer = devm_kcalloc(dev, info->debug_region_size + 1, + sizeof(char), GFP_KERNEL); + if (!info->debug_buffer) + return -ENOMEM; + /* Setup NULL termination */ + info->debug_buffer[info->debug_region_size] = 0; + + info->d = debugfs_create_file(strncat(debug_name, dev_name(dev), + sizeof(debug_name)), + 0444, NULL, info, &ti_sci_debug_fops); + if (IS_ERR(info->d)) + return PTR_ERR(info->d); + + dev_dbg(dev, "Debug region => %p, size = %zu bytes, resource: %pr\n", + info->debug_region, info->debug_region_size, res); + return 0; +} + +/** + * ti_sci_debugfs_destroy() - clean up log debug file + * @pdev: platform device pointer + * @info: Pointer to SCI entity information + */ +static void ti_sci_debugfs_destroy(struct platform_device *pdev, + struct ti_sci_info *info) +{ + if (IS_ERR(info->debug_region)) + return; + + debugfs_remove(info->d); +} +#else /* CONFIG_DEBUG_FS */ +static inline int ti_sci_debugfs_create(struct platform_device *dev, + struct ti_sci_info *info) +{ + return 0; +} + +static inline void ti_sci_debugfs_destroy(struct platform_device *dev, + struct ti_sci_info *info) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +/** + * ti_sci_dump_header_dbg() - Helper to dump a message header. + * @dev: Device pointer corresponding to the SCI entity + * @hdr: pointer to header. + */ +static inline void ti_sci_dump_header_dbg(struct device *dev, + struct ti_sci_msg_hdr *hdr) +{ + dev_dbg(dev, "MSGHDR:type=0x%04x host=0x%02x seq=0x%02x flags=0x%08x\n", + hdr->type, hdr->host, hdr->seq, hdr->flags); +} + +/** + * ti_sci_rx_callback() - mailbox client callback for receive messages + * @cl: client pointer + * @m: mailbox message + * + * Processes one received message to appropriate transfer information and + * signals completion of the transfer. + * + * NOTE: This function will be invoked in IRQ context, hence should be + * as optimal as possible. + */ +static void ti_sci_rx_callback(struct mbox_client *cl, void *m) +{ + struct ti_sci_info *info = cl_to_ti_sci_info(cl); + struct device *dev = info->dev; + struct ti_sci_xfers_info *minfo = &info->minfo; + struct ti_msgmgr_message *mbox_msg = m; + struct ti_sci_msg_hdr *hdr = (struct ti_sci_msg_hdr *)mbox_msg->buf; + struct ti_sci_xfer *xfer; + u8 xfer_id; + + xfer_id = hdr->seq; + + /* + * Are we even expecting this? + * NOTE: barriers were implicit in locks used for modifying the bitmap + */ + if (!test_bit(xfer_id, minfo->xfer_alloc_table)) { + dev_err(dev, "Message for %d is not expected!\n", xfer_id); + return; + } + + xfer = &minfo->xfer_block[xfer_id]; + + /* Is the message of valid length? */ + if (mbox_msg->len > info->desc->max_msg_size) { + dev_err(dev, "Unable to handle %d xfer(max %d)\n", + mbox_msg->len, info->desc->max_msg_size); + ti_sci_dump_header_dbg(dev, hdr); + return; + } + if (mbox_msg->len < xfer->rx_len) { + dev_err(dev, "Recv xfer %d < expected %d length\n", + mbox_msg->len, xfer->rx_len); + ti_sci_dump_header_dbg(dev, hdr); + return; + } + + ti_sci_dump_header_dbg(dev, hdr); + /* Take a copy to the rx buffer.. */ + memcpy(xfer->xfer_buf, mbox_msg->buf, xfer->rx_len); + complete(&xfer->done); +} + +/** + * ti_sci_get_one_xfer() - Allocate one message + * @info: Pointer to SCI entity information + * @msg_type: Message type + * @msg_flags: Flag to set for the message + * @tx_message_size: transmit message size + * @rx_message_size: receive message size + * + * Helper function which is used by various command functions that are + * exposed to clients of this driver for allocating a message traffic event. + * + * This function can sleep depending on pending requests already in the system + * for the SCI entity. Further, this also holds a spinlock to maintain integrity + * of internal data structures. + * + * Return: 0 if all went fine, else corresponding error. + */ +static struct ti_sci_xfer *ti_sci_get_one_xfer(struct ti_sci_info *info, + u16 msg_type, u32 msg_flags, + size_t tx_message_size, + size_t rx_message_size) +{ + struct ti_sci_xfers_info *minfo = &info->minfo; + struct ti_sci_xfer *xfer; + struct ti_sci_msg_hdr *hdr; + unsigned long flags; + unsigned long bit_pos; + u8 xfer_id; + int ret; + int timeout; + + /* Ensure we have sane transfer sizes */ + if (rx_message_size > info->desc->max_msg_size || + tx_message_size > info->desc->max_msg_size || + rx_message_size < sizeof(*hdr) || tx_message_size < sizeof(*hdr)) + return ERR_PTR(-ERANGE); + + /* + * Ensure we have only controlled number of pending messages. + * Ideally, we might just have to wait a single message, be + * conservative and wait 5 times that.. + */ + timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms) * 5; + ret = down_timeout(&minfo->sem_xfer_count, timeout); + if (ret < 0) + return ERR_PTR(ret); + + /* Keep the locked section as small as possible */ + spin_lock_irqsave(&minfo->xfer_lock, flags); + bit_pos = find_first_zero_bit(minfo->xfer_alloc_table, + info->desc->max_msgs); + set_bit(bit_pos, minfo->xfer_alloc_table); + spin_unlock_irqrestore(&minfo->xfer_lock, flags); + + /* + * We already ensured in probe that we can have max messages that can + * fit in hdr.seq - NOTE: this improves access latencies + * to predictable O(1) access, BUT, it opens us to risk if + * remote misbehaves with corrupted message sequence responses. + * If that happens, we are going to be messed up anyways.. + */ + xfer_id = (u8)bit_pos; + + xfer = &minfo->xfer_block[xfer_id]; + + hdr = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + xfer->tx_message.len = tx_message_size; + xfer->rx_len = (u8)rx_message_size; + + reinit_completion(&xfer->done); + + hdr->seq = xfer_id; + hdr->type = msg_type; + hdr->host = info->desc->host_id; + hdr->flags = msg_flags; + + return xfer; +} + +/** + * ti_sci_put_one_xfer() - Release a message + * @minfo: transfer info pointer + * @xfer: message that was reserved by ti_sci_get_one_xfer + * + * This holds a spinlock to maintain integrity of internal data structures. + */ +static void ti_sci_put_one_xfer(struct ti_sci_xfers_info *minfo, + struct ti_sci_xfer *xfer) +{ + unsigned long flags; + struct ti_sci_msg_hdr *hdr; + u8 xfer_id; + + hdr = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + xfer_id = hdr->seq; + + /* + * Keep the locked section as small as possible + * NOTE: we might escape with smp_mb and no lock here.. + * but just be conservative and symmetric. + */ + spin_lock_irqsave(&minfo->xfer_lock, flags); + clear_bit(xfer_id, minfo->xfer_alloc_table); + spin_unlock_irqrestore(&minfo->xfer_lock, flags); + + /* Increment the count for the next user to get through */ + up(&minfo->sem_xfer_count); +} + +/** + * ti_sci_do_xfer() - Do one transfer + * @info: Pointer to SCI entity information + * @xfer: Transfer to initiate and wait for response + * + * Return: -ETIMEDOUT in case of no response, if transmit error, + * return corresponding error, else if all goes well, + * return 0. + */ +static inline int ti_sci_do_xfer(struct ti_sci_info *info, + struct ti_sci_xfer *xfer) +{ + int ret; + int timeout; + struct device *dev = info->dev; + + ret = mbox_send_message(info->chan_tx, &xfer->tx_message); + if (ret < 0) + return ret; + + ret = 0; + + /* And we wait for the response. */ + timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms); + if (!wait_for_completion_timeout(&xfer->done, timeout)) { + dev_err(dev, "Mbox timedout in resp(caller: %pF)\n", + (void *)_RET_IP_); + ret = -ETIMEDOUT; + } + /* + * NOTE: we might prefer not to need the mailbox ticker to manage the + * transfer queueing since the protocol layer queues things by itself. + * Unfortunately, we have to kick the mailbox framework after we have + * received our message. + */ + mbox_client_txdone(info->chan_tx, ret); + + return ret; +} + +/** + * ti_sci_cmd_get_revision() - command to get the revision of the SCI entity + * @info: Pointer to SCI entity information + * + * Updates the SCI information in the internal data structure. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_get_revision(struct ti_sci_info *info) +{ + struct device *dev = info->dev; + struct ti_sci_handle *handle = &info->handle; + struct ti_sci_version_info *ver = &handle->version; + struct ti_sci_msg_resp_version *rev_info; + struct ti_sci_xfer *xfer; + int ret; + + /* No need to setup flags since it is expected to respond */ + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_VERSION, + 0x0, sizeof(struct ti_sci_msg_hdr), + sizeof(*rev_info)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + + rev_info = (struct ti_sci_msg_resp_version *)xfer->xfer_buf; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + ver->abi_major = rev_info->abi_major; + ver->abi_minor = rev_info->abi_minor; + ver->firmware_revision = rev_info->firmware_revision; + strncpy(ver->firmware_description, rev_info->firmware_description, + sizeof(ver->firmware_description)); + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + return ret; +} + +/** + * ti_sci_is_response_ack() - Generic ACK/NACK message checkup + * @r: pointer to response buffer + * + * Return: true if the response was an ACK, else returns false. + */ +static inline bool ti_sci_is_response_ack(void *r) +{ + struct ti_sci_msg_hdr *hdr = r; + + return hdr->flags & TI_SCI_FLAG_RESP_GENERIC_ACK ? true : false; +} + +/** + * ti_sci_set_device_state() - Set device state helper + * @handle: pointer to TI SCI handle + * @id: Device identifier + * @flags: flags to setup for the device + * @state: State to move the device to + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_set_device_state(const struct ti_sci_handle *handle, + u32 id, u32 flags, u8 state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_device_state *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE, + flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_device_state *)xfer->xfer_buf; + req->id = id; + req->state = state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_get_device_state() - Get device state helper + * @handle: Handle to the device + * @id: Device Identifier + * @clcnt: Pointer to Context Loss Count + * @resets: pointer to resets + * @p_state: pointer to p_state + * @c_state: pointer to c_state + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_get_device_state(const struct ti_sci_handle *handle, + u32 id, u32 *clcnt, u32 *resets, + u8 *p_state, u8 *c_state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_device_state *req; + struct ti_sci_msg_resp_get_device_state *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + if (!clcnt && !resets && !p_state && !c_state) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + /* Response is expected, so need of any flags */ + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE, + 0, sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_device_state *)xfer->xfer_buf; + req->id = id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_device_state *)xfer->xfer_buf; + if (!ti_sci_is_response_ack(resp)) { + ret = -ENODEV; + goto fail; + } + + if (clcnt) + *clcnt = resp->context_loss_count; + if (resets) + *resets = resp->resets; + if (p_state) + *p_state = resp->programmed_state; + if (c_state) + *c_state = resp->current_state; +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_device() - command to request for device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * NOTE: The request is for exclusive access for the processor. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + MSG_FLAG_DEVICE_EXCLUSIVE, + MSG_DEVICE_SW_STATE_ON); +} + +/** + * ti_sci_cmd_idle_device() - Command to idle a device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + MSG_FLAG_DEVICE_EXCLUSIVE, + MSG_DEVICE_SW_STATE_RETENTION); +} + +/** + * ti_sci_cmd_put_device() - command to release a device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_put_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + 0, MSG_DEVICE_SW_STATE_AUTO_OFF); +} + +/** + * ti_sci_cmd_dev_is_valid() - Is the device valid + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Return: 0 if all went fine and the device ID is valid, else return + * appropriate error. + */ +static int ti_sci_cmd_dev_is_valid(const struct ti_sci_handle *handle, u32 id) +{ + u8 unused; + + /* check the device state which will also tell us if the ID is valid */ + return ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &unused); +} + +/** + * ti_sci_cmd_dev_get_clcnt() - Get context loss counter + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @count: Pointer to Context Loss counter to populate + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_get_clcnt(const struct ti_sci_handle *handle, u32 id, + u32 *count) +{ + return ti_sci_get_device_state(handle, id, count, NULL, NULL, NULL); +} + +/** + * ti_sci_cmd_dev_is_idle() - Check if the device is requested to be idle + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be idle + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_idle(const struct ti_sci_handle *handle, u32 id, + bool *r_state) +{ + int ret; + u8 state; + + if (!r_state) + return -EINVAL; + + ret = ti_sci_get_device_state(handle, id, NULL, NULL, &state, NULL); + if (ret) + return ret; + + *r_state = (state == MSG_DEVICE_SW_STATE_RETENTION); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_stop() - Check if the device is requested to be stopped + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be stopped + * @curr_state: true if currently stopped. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_stop(const struct ti_sci_handle *handle, u32 id, + bool *r_state, bool *curr_state) +{ + int ret; + u8 p_state, c_state; + + if (!r_state && !curr_state) + return -EINVAL; + + ret = + ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); + if (ret) + return ret; + + if (r_state) + *r_state = (p_state == MSG_DEVICE_SW_STATE_AUTO_OFF); + if (curr_state) + *curr_state = (c_state == MSG_DEVICE_HW_STATE_OFF); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_on() - Check if the device is requested to be ON + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be ON + * @curr_state: true if currently ON and active + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_on(const struct ti_sci_handle *handle, u32 id, + bool *r_state, bool *curr_state) +{ + int ret; + u8 p_state, c_state; + + if (!r_state && !curr_state) + return -EINVAL; + + ret = + ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); + if (ret) + return ret; + + if (r_state) + *r_state = (p_state == MSG_DEVICE_SW_STATE_ON); + if (curr_state) + *curr_state = (c_state == MSG_DEVICE_HW_STATE_ON); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_trans() - Check if the device is currently transitioning + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @curr_state: true if currently transitioning. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_trans(const struct ti_sci_handle *handle, u32 id, + bool *curr_state) +{ + int ret; + u8 state; + + if (!curr_state) + return -EINVAL; + + ret = ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &state); + if (ret) + return ret; + + *curr_state = (state == MSG_DEVICE_HW_STATE_TRANS); + + return 0; +} + +/** + * ti_sci_cmd_set_device_resets() - command to set resets for device managed + * by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * @reset_state: Device specific reset bit field + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_set_device_resets(const struct ti_sci_handle *handle, + u32 id, u32 reset_state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_device_resets *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_DEVICE_RESETS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_device_resets *)xfer->xfer_buf; + req->id = id; + req->resets = reset_state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_device_resets() - Get reset state for device managed + * by TISCI + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @reset_state: Pointer to reset state to populate + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_get_device_resets(const struct ti_sci_handle *handle, + u32 id, u32 *reset_state) +{ + return ti_sci_get_device_state(handle, id, NULL, reset_state, NULL, + NULL); +} + +/** + * ti_sci_set_clock_state() - Set clock state helper + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @flags: Header flags as needed + * @state: State to request for the clock. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_set_clock_state(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u32 flags, u8 state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_clock_state *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_STATE, + flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_clock_state *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + req->request_state = state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_clock_state() - Get clock state helper + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @programmed_state: State requested for clock to move to + * @current_state: State that the clock is currently in + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_get_clock_state(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u8 *programmed_state, u8 *current_state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_clock_state *req; + struct ti_sci_msg_resp_get_clock_state *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + if (!programmed_state && !current_state) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_STATE, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_clock_state *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_clock_state *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) { + ret = -ENODEV; + goto fail; + } + + if (programmed_state) + *programmed_state = resp->programmed_state; + if (current_state) + *current_state = resp->current_state; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_clock() - Get control of a clock from TI SCI + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @needs_ssc: 'true' if Spread Spectrum clock is desired, else 'false' + * @can_change_freq: 'true' if frequency change is desired, else 'false' + * @enable_input_term: 'true' if input termination is desired, else 'false' + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_get_clock(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool needs_ssc, bool can_change_freq, + bool enable_input_term) +{ + u32 flags = 0; + + flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0; + flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0; + flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0; + + return ti_sci_set_clock_state(handle, dev_id, clk_id, flags, + MSG_CLOCK_SW_STATE_REQ); +} + +/** + * ti_sci_cmd_idle_clock() - Idle a clock which is in our control + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * + * NOTE: This clock must have been requested by get_clock previously. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id) +{ + return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, + MSG_CLOCK_SW_STATE_UNREQ); +} + +/** + * ti_sci_cmd_put_clock() - Release a clock from our control back to TISCI + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * + * NOTE: This clock must have been requested by get_clock previously. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_put_clock(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id) +{ + return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, + MSG_CLOCK_SW_STATE_AUTO); +} + +/** + * ti_sci_cmd_clk_is_auto() - Is the clock being auto managed + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is auto managed + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_auto(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, bool *req_state) +{ + u8 state = 0; + int ret; + + if (!req_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, &state, NULL); + if (ret) + return ret; + + *req_state = (state == MSG_CLOCK_SW_STATE_AUTO); + return 0; +} + +/** + * ti_sci_cmd_clk_is_on() - Is the clock ON + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is managed by us and enabled + * @curr_state: state indicating if the clock is ready for operation + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_on(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool *req_state, bool *curr_state) +{ + u8 c_state = 0, r_state = 0; + int ret; + + if (!req_state && !curr_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, + &r_state, &c_state); + if (ret) + return ret; + + if (req_state) + *req_state = (r_state == MSG_CLOCK_SW_STATE_REQ); + if (curr_state) + *curr_state = (c_state == MSG_CLOCK_HW_STATE_READY); + return 0; +} + +/** + * ti_sci_cmd_clk_is_off() - Is the clock OFF + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is managed by us and disabled + * @curr_state: state indicating if the clock is NOT ready for operation + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_off(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool *req_state, bool *curr_state) +{ + u8 c_state = 0, r_state = 0; + int ret; + + if (!req_state && !curr_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, + &r_state, &c_state); + if (ret) + return ret; + + if (req_state) + *req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ); + if (curr_state) + *curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY); + return 0; +} + +/** + * ti_sci_cmd_clk_set_parent() - Set the clock source of a specific device clock + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @parent_id: Parent clock identifier to set + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_set_parent(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u8 parent_id) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_clock_parent *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_PARENT, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_clock_parent *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + req->parent_id = parent_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_get_parent() - Get current parent clock source + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @parent_id: Current clock parent + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_parent(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u8 *parent_id) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_clock_parent *req; + struct ti_sci_msg_resp_get_clock_parent *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !parent_id) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_PARENT, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_clock_parent *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_clock_parent *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *parent_id = resp->parent_id; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_get_num_parents() - Get num parents of the current clk source + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @num_parents: Returns he number of parents to the current clock. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_num_parents(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u8 *num_parents) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_clock_num_parents *req; + struct ti_sci_msg_resp_get_clock_num_parents *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !num_parents) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_clock_num_parents *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_clock_num_parents *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *num_parents = resp->num_parents; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_get_match_freq() - Find a good match for frequency + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * @max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @match_freq: Frequency match in Hz response. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_match_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 min_freq, + u64 target_freq, u64 max_freq, + u64 *match_freq) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_query_clock_freq *req; + struct ti_sci_msg_resp_query_clock_freq *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !match_freq) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_QUERY_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_query_clock_freq *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + req->min_freq_hz = min_freq; + req->target_freq_hz = target_freq; + req->max_freq_hz = max_freq; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_query_clock_freq *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *match_freq = resp->freq_hz; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_set_freq() - Set a frequency for clock + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * @max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_set_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 min_freq, + u64 target_freq, u64 max_freq) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_clock_freq *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_clock_freq *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + req->min_freq_hz = min_freq; + req->target_freq_hz = target_freq; + req->max_freq_hz = max_freq; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_get_freq() - Get current frequency + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @freq: Currently frequency in Hz + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 *freq) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_clock_freq *req; + struct ti_sci_msg_resp_get_clock_freq *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !freq) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_clock_freq *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_clock_freq *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *freq = resp->freq_hz; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_reboot *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SYS_RESET, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_reboot *)xfer->xfer_buf; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + ret = 0; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/* + * ti_sci_setup_ops() - Setup the operations structures + * @info: pointer to TISCI pointer + */ +static void ti_sci_setup_ops(struct ti_sci_info *info) +{ + struct ti_sci_ops *ops = &info->handle.ops; + struct ti_sci_core_ops *core_ops = &ops->core_ops; + struct ti_sci_dev_ops *dops = &ops->dev_ops; + struct ti_sci_clk_ops *cops = &ops->clk_ops; + + core_ops->reboot_device = ti_sci_cmd_core_reboot; + + dops->get_device = ti_sci_cmd_get_device; + dops->idle_device = ti_sci_cmd_idle_device; + dops->put_device = ti_sci_cmd_put_device; + + dops->is_valid = ti_sci_cmd_dev_is_valid; + dops->get_context_loss_count = ti_sci_cmd_dev_get_clcnt; + dops->is_idle = ti_sci_cmd_dev_is_idle; + dops->is_stop = ti_sci_cmd_dev_is_stop; + dops->is_on = ti_sci_cmd_dev_is_on; + dops->is_transitioning = ti_sci_cmd_dev_is_trans; + dops->set_device_resets = ti_sci_cmd_set_device_resets; + dops->get_device_resets = ti_sci_cmd_get_device_resets; + + cops->get_clock = ti_sci_cmd_get_clock; + cops->idle_clock = ti_sci_cmd_idle_clock; + cops->put_clock = ti_sci_cmd_put_clock; + cops->is_auto = ti_sci_cmd_clk_is_auto; + cops->is_on = ti_sci_cmd_clk_is_on; + cops->is_off = ti_sci_cmd_clk_is_off; + + cops->set_parent = ti_sci_cmd_clk_set_parent; + cops->get_parent = ti_sci_cmd_clk_get_parent; + cops->get_num_parents = ti_sci_cmd_clk_get_num_parents; + + cops->get_best_match_freq = ti_sci_cmd_clk_get_match_freq; + cops->set_freq = ti_sci_cmd_clk_set_freq; + cops->get_freq = ti_sci_cmd_clk_get_freq; +} + +/** + * ti_sci_get_handle() - Get the TI SCI handle for a device + * @dev: Pointer to device for which we want SCI handle + * + * NOTE: The function does not track individual clients of the framework + * and is expected to be maintained by caller of TI SCI protocol library. + * ti_sci_put_handle must be balanced with successful ti_sci_get_handle + * Return: pointer to handle if successful, else: + * -EPROBE_DEFER if the instance is not ready + * -ENODEV if the required node handler is missing + * -EINVAL if invalid conditions are encountered. + */ +const struct ti_sci_handle *ti_sci_get_handle(struct device *dev) +{ + struct device_node *ti_sci_np; + struct list_head *p; + struct ti_sci_handle *handle = NULL; + struct ti_sci_info *info; + + if (!dev) { + pr_err("I need a device pointer\n"); + return ERR_PTR(-EINVAL); + } + ti_sci_np = of_get_parent(dev->of_node); + if (!ti_sci_np) { + dev_err(dev, "No OF information\n"); + return ERR_PTR(-EINVAL); + } + + mutex_lock(&ti_sci_list_mutex); + list_for_each(p, &ti_sci_list) { + info = list_entry(p, struct ti_sci_info, node); + if (ti_sci_np == info->dev->of_node) { + handle = &info->handle; + info->users++; + break; + } + } + mutex_unlock(&ti_sci_list_mutex); + of_node_put(ti_sci_np); + + if (!handle) + return ERR_PTR(-EPROBE_DEFER); + + return handle; +} +EXPORT_SYMBOL_GPL(ti_sci_get_handle); + +/** + * ti_sci_put_handle() - Release the handle acquired by ti_sci_get_handle + * @handle: Handle acquired by ti_sci_get_handle + * + * NOTE: The function does not track individual clients of the framework + * and is expected to be maintained by caller of TI SCI protocol library. + * ti_sci_put_handle must be balanced with successful ti_sci_get_handle + * + * Return: 0 is successfully released + * if an error pointer was passed, it returns the error value back, + * if null was passed, it returns -EINVAL; + */ +int ti_sci_put_handle(const struct ti_sci_handle *handle) +{ + struct ti_sci_info *info; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + mutex_lock(&ti_sci_list_mutex); + if (!WARN_ON(!info->users)) + info->users--; + mutex_unlock(&ti_sci_list_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(ti_sci_put_handle); + +static void devm_ti_sci_release(struct device *dev, void *res) +{ + const struct ti_sci_handle **ptr = res; + const struct ti_sci_handle *handle = *ptr; + int ret; + + ret = ti_sci_put_handle(handle); + if (ret) + dev_err(dev, "failed to put handle %d\n", ret); +} + +/** + * devm_ti_sci_get_handle() - Managed get handle + * @dev: device for which we want SCI handle for. + * + * NOTE: This releases the handle once the device resources are + * no longer needed. MUST NOT BE released with ti_sci_put_handle. + * The function does not track individual clients of the framework + * and is expected to be maintained by caller of TI SCI protocol library. + * + * Return: 0 if all went fine, else corresponding error. + */ +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev) +{ + const struct ti_sci_handle **ptr; + const struct ti_sci_handle *handle; + + ptr = devres_alloc(devm_ti_sci_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + handle = ti_sci_get_handle(dev); + + if (!IS_ERR(handle)) { + *ptr = handle; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return handle; +} +EXPORT_SYMBOL_GPL(devm_ti_sci_get_handle); + +static int tisci_reboot_handler(struct notifier_block *nb, unsigned long mode, + void *cmd) +{ + struct ti_sci_info *info = reboot_to_ti_sci_info(nb); + const struct ti_sci_handle *handle = &info->handle; + + ti_sci_cmd_core_reboot(handle); + + /* call fail OR pass, we should not be here in the first place */ + return NOTIFY_BAD; +} + +/* Description for K2G */ +static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = { + .host_id = 2, + /* Conservative duration */ + .max_rx_timeout_ms = 1000, + /* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */ + .max_msgs = 20, + .max_msg_size = 64, +}; + +static const struct of_device_id ti_sci_of_match[] = { + {.compatible = "ti,k2g-sci", .data = &ti_sci_pmmc_k2g_desc}, + { /* Sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ti_sci_of_match); + +static int ti_sci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id; + const struct ti_sci_desc *desc; + struct ti_sci_xfer *xfer; + struct ti_sci_info *info = NULL; + struct ti_sci_xfers_info *minfo; + struct mbox_client *cl; + int ret = -EINVAL; + int i; + int reboot = 0; + + of_id = of_match_device(ti_sci_of_match, dev); + if (!of_id) { + dev_err(dev, "OF data missing\n"); + return -EINVAL; + } + desc = of_id->data; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = dev; + info->desc = desc; + reboot = of_property_read_bool(dev->of_node, + "ti,system-reboot-controller"); + INIT_LIST_HEAD(&info->node); + minfo = &info->minfo; + + /* + * Pre-allocate messages + * NEVER allocate more than what we can indicate in hdr.seq + * if we have data description bug, force a fix.. + */ + if (WARN_ON(desc->max_msgs >= + 1 << 8 * sizeof(((struct ti_sci_msg_hdr *)0)->seq))) + return -EINVAL; + + minfo->xfer_block = devm_kcalloc(dev, + desc->max_msgs, + sizeof(*minfo->xfer_block), + GFP_KERNEL); + if (!minfo->xfer_block) + return -ENOMEM; + + minfo->xfer_alloc_table = devm_kzalloc(dev, + BITS_TO_LONGS(desc->max_msgs) + * sizeof(unsigned long), + GFP_KERNEL); + if (!minfo->xfer_alloc_table) + return -ENOMEM; + bitmap_zero(minfo->xfer_alloc_table, desc->max_msgs); + + /* Pre-initialize the buffer pointer to pre-allocated buffers */ + for (i = 0, xfer = minfo->xfer_block; i < desc->max_msgs; i++, xfer++) { + xfer->xfer_buf = devm_kcalloc(dev, 1, desc->max_msg_size, + GFP_KERNEL); + if (!xfer->xfer_buf) + return -ENOMEM; + + xfer->tx_message.buf = xfer->xfer_buf; + init_completion(&xfer->done); + } + + ret = ti_sci_debugfs_create(pdev, info); + if (ret) + dev_warn(dev, "Failed to create debug file\n"); + + platform_set_drvdata(pdev, info); + + cl = &info->cl; + cl->dev = dev; + cl->tx_block = false; + cl->rx_callback = ti_sci_rx_callback; + cl->knows_txdone = true; + + spin_lock_init(&minfo->xfer_lock); + sema_init(&minfo->sem_xfer_count, desc->max_msgs); + + info->chan_rx = mbox_request_channel_byname(cl, "rx"); + if (IS_ERR(info->chan_rx)) { + ret = PTR_ERR(info->chan_rx); + goto out; + } + + info->chan_tx = mbox_request_channel_byname(cl, "tx"); + if (IS_ERR(info->chan_tx)) { + ret = PTR_ERR(info->chan_tx); + goto out; + } + ret = ti_sci_cmd_get_revision(info); + if (ret) { + dev_err(dev, "Unable to communicate with TISCI(%d)\n", ret); + goto out; + } + + ti_sci_setup_ops(info); + + if (reboot) { + info->nb.notifier_call = tisci_reboot_handler; + info->nb.priority = 128; + + ret = register_restart_handler(&info->nb); + if (ret) { + dev_err(dev, "reboot registration fail(%d)\n", ret); + return ret; + } + } + + dev_info(dev, "ABI: %d.%d (firmware rev 0x%04x '%s')\n", + info->handle.version.abi_major, info->handle.version.abi_minor, + info->handle.version.firmware_revision, + info->handle.version.firmware_description); + + mutex_lock(&ti_sci_list_mutex); + list_add_tail(&info->node, &ti_sci_list); + mutex_unlock(&ti_sci_list_mutex); + + return of_platform_populate(dev->of_node, NULL, NULL, dev); +out: + if (!IS_ERR(info->chan_tx)) + mbox_free_channel(info->chan_tx); + if (!IS_ERR(info->chan_rx)) + mbox_free_channel(info->chan_rx); + debugfs_remove(info->d); + return ret; +} + +static int ti_sci_remove(struct platform_device *pdev) +{ + struct ti_sci_info *info; + struct device *dev = &pdev->dev; + int ret = 0; + + of_platform_depopulate(dev); + + info = platform_get_drvdata(pdev); + + if (info->nb.notifier_call) + unregister_restart_handler(&info->nb); + + mutex_lock(&ti_sci_list_mutex); + if (info->users) + ret = -EBUSY; + else + list_del(&info->node); + mutex_unlock(&ti_sci_list_mutex); + + if (!ret) { + ti_sci_debugfs_destroy(pdev, info); + + /* Safe to free channels since no more users */ + mbox_free_channel(info->chan_tx); + mbox_free_channel(info->chan_rx); + } + + return ret; +} + +static struct platform_driver ti_sci_driver = { + .probe = ti_sci_probe, + .remove = ti_sci_remove, + .driver = { + .name = "ti-sci", + .of_match_table = of_match_ptr(ti_sci_of_match), + }, +}; +module_platform_driver(ti_sci_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI System Control Interface(SCI) driver"); +MODULE_AUTHOR("Nishanth Menon"); +MODULE_ALIAS("platform:ti-sci"); |