diff options
Diffstat (limited to 'drivers/edac')
| -rw-r--r-- | drivers/edac/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/edac/Makefile | 1 | ||||
| -rw-r--r-- | drivers/edac/amd8111_edac.c | 3 | ||||
| -rw-r--r-- | drivers/edac/cell_edac.c | 2 | ||||
| -rw-r--r-- | drivers/edac/cpc925_edac.c | 1017 | ||||
| -rw-r--r-- | drivers/edac/edac_core.h | 1 | ||||
| -rw-r--r-- | drivers/edac/edac_device.c | 14 |
7 files changed, 1045 insertions, 4 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index ab4f3592a11c..4339b1a879cd 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -5,7 +5,7 @@ # menuconfig EDAC - bool "EDAC - error detection and reporting" + bool "EDAC (Error Detection And Correction) reporting" depends on HAS_IOMEM depends on X86 || PPC help @@ -232,4 +232,13 @@ config EDAC_AMD8111 Note, add more Kconfig dependency if it's adopted on some machine other than Maple. +config EDAC_CPC925 + tristate "IBM CPC925 Memory Controller (PPC970FX)" + depends on EDAC_MM_EDAC && PPC64 + help + Support for error detection and correction on the + IBM CPC925 Bridge and Memory Controller, which is + a companion chip to the PowerPC 970 family of + processors. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 633dc5604ee3..98aa4a7db412 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -18,6 +18,7 @@ edac_core-objs += edac_pci.o edac_pci_sysfs.o endif obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o +obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o obj-$(CONFIG_EDAC_I5000) += i5000_edac.o obj-$(CONFIG_EDAC_I5100) += i5100_edac.o obj-$(CONFIG_EDAC_I5400) += i5400_edac.o diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c index 2cb58ef743e0..35b78d04bbfa 100644 --- a/drivers/edac/amd8111_edac.c +++ b/drivers/edac/amd8111_edac.c @@ -37,7 +37,6 @@ #define AMD8111_EDAC_MOD_STR "amd8111_edac" #define PCI_DEVICE_ID_AMD_8111_PCI 0x7460 -static int edac_dev_idx; enum amd8111_edac_devs { LPC_BRIDGE = 0, @@ -377,7 +376,7 @@ static int amd8111_dev_probe(struct pci_dev *dev, * edac_device_ctl_info, but make use of existing * one instead. */ - dev_info->edac_idx = edac_dev_idx++; + dev_info->edac_idx = edac_device_alloc_index(); dev_info->edac_dev = edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1, NULL, 0, 0, diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index cb0f639f049d..c973004c002c 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -227,7 +227,7 @@ static struct platform_driver cell_edac_driver = { .owner = THIS_MODULE, }, .probe = cell_edac_probe, - .remove = cell_edac_remove, + .remove = __devexit_p(cell_edac_remove), }; static int __init cell_edac_init(void) diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c new file mode 100644 index 000000000000..8c54196b5aba --- /dev/null +++ b/drivers/edac/cpc925_edac.c @@ -0,0 +1,1017 @@ +/* + * cpc925_edac.c, EDAC driver for IBM CPC925 Bridge and Memory Controller. + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: Cao Qingtao <qingtao.cao@windriver.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/edac.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include "edac_core.h" +#include "edac_module.h" + +#define CPC925_EDAC_REVISION " Ver: 1.0.0 " __DATE__ +#define CPC925_EDAC_MOD_STR "cpc925_edac" + +#define cpc925_printk(level, fmt, arg...) \ + edac_printk(level, "CPC925", fmt, ##arg) + +#define cpc925_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "CPC925", fmt, ##arg) + +/* + * CPC925 registers are of 32 bits with bit0 defined at the + * most significant bit and bit31 at that of least significant. + */ +#define CPC925_BITS_PER_REG 32 +#define CPC925_BIT(nr) (1UL << (CPC925_BITS_PER_REG - 1 - nr)) + +/* + * EDAC device names for the error detections of + * CPU Interface and Hypertransport Link. + */ +#define CPC925_CPU_ERR_DEV "cpu" +#define CPC925_HT_LINK_DEV "htlink" + +/* Suppose DDR Refresh cycle is 15.6 microsecond */ +#define CPC925_REF_FREQ 0xFA69 +#define CPC925_SCRUB_BLOCK_SIZE 64 /* bytes */ +#define CPC925_NR_CSROWS 8 + +/* + * All registers and bits definitions are taken from + * "CPC925 Bridge and Memory Controller User Manual, SA14-2761-02". + */ + +/* + * CPU and Memory Controller Registers + */ +/************************************************************ + * Processor Interface Exception Mask Register (APIMASK) + ************************************************************/ +#define REG_APIMASK_OFFSET 0x30070 +enum apimask_bits { + APIMASK_DART = CPC925_BIT(0), /* DART Exception */ + APIMASK_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */ + APIMASK_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */ + APIMASK_STAT = CPC925_BIT(3), /* Status Exception */ + APIMASK_DERR = CPC925_BIT(4), /* Data Error Exception */ + APIMASK_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */ + APIMASK_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */ + /* BIT(7) Reserved */ + APIMASK_ECC_UE_H = CPC925_BIT(8), /* UECC upper */ + APIMASK_ECC_CE_H = CPC925_BIT(9), /* CECC upper */ + APIMASK_ECC_UE_L = CPC925_BIT(10), /* UECC lower */ + APIMASK_ECC_CE_L = CPC925_BIT(11), /* CECC lower */ + + CPU_MASK_ENABLE = (APIMASK_DART | APIMASK_ADI0 | APIMASK_ADI1 | + APIMASK_STAT | APIMASK_DERR | APIMASK_ADRS0 | + APIMASK_ADRS1), + ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H | + APIMASK_ECC_UE_L | APIMASK_ECC_CE_L), +}; + +/************************************************************ + * Processor Interface Exception Register (APIEXCP) + ************************************************************/ +#define REG_APIEXCP_OFFSET 0x30060 +enum apiexcp_bits { + APIEXCP_DART = CPC925_BIT(0), /* DART Exception */ + APIEXCP_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */ + APIEXCP_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */ + APIEXCP_STAT = CPC925_BIT(3), /* Status Exception */ + APIEXCP_DERR = CPC925_BIT(4), /* Data Error Exception */ + APIEXCP_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */ + APIEXCP_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */ + /* BIT(7) Reserved */ + APIEXCP_ECC_UE_H = CPC925_BIT(8), /* UECC upper */ + APIEXCP_ECC_CE_H = CPC925_BIT(9), /* CECC upper */ + APIEXCP_ECC_UE_L = CPC925_BIT(10), /* UECC lower */ + APIEXCP_ECC_CE_L = CPC925_BIT(11), /* CECC lower */ + + CPU_EXCP_DETECTED = (APIEXCP_DART | APIEXCP_ADI0 | APIEXCP_ADI1 | + APIEXCP_STAT | APIEXCP_DERR | APIEXCP_ADRS0 | + APIEXCP_ADRS1), + UECC_EXCP_DETECTED = (APIEXCP_ECC_UE_H | APIEXCP_ECC_UE_L), + CECC_EXCP_DETECTED = (APIEXCP_ECC_CE_H | APIEXCP_ECC_CE_L), + ECC_EXCP_DETECTED = (UECC_EXCP_DETECTED | CECC_EXCP_DETECTED), +}; + +/************************************************************ + * Memory Bus Configuration Register (MBCR) +************************************************************/ +#define REG_MBCR_OFFSET 0x2190 +#define MBCR_64BITCFG_SHIFT 23 +#define MBCR_64BITCFG_MASK (1UL << MBCR_64BITCFG_SHIFT) +#define MBCR_64BITBUS_SHIFT 22 +#define MBCR_64BITBUS_MASK (1UL << MBCR_64BITBUS_SHIFT) + +/************************************************************ + * Memory Bank Mode Register (MBMR) +************************************************************/ +#define REG_MBMR_OFFSET 0x21C0 +#define MBMR_MODE_MAX_VALUE 0xF +#define MBMR_MODE_SHIFT 25 +#define MBMR_MODE_MASK (MBMR_MODE_MAX_VALUE << MBMR_MODE_SHIFT) +#define MBMR_BBA_SHIFT 24 +#define MBMR_BBA_MASK (1UL << MBMR_BBA_SHIFT) + +/************************************************************ + * Memory Bank Boundary Address Register (MBBAR) + ************************************************************/ +#define REG_MBBAR_OFFSET 0x21D0 +#define MBBAR_BBA_MAX_VALUE 0xFF +#define MBBAR_BBA_SHIFT 24 +#define MBBAR_BBA_MASK (MBBAR_BBA_MAX_VALUE << MBBAR_BBA_SHIFT) + +/************************************************************ + * Memory Scrub Control Register (MSCR) + ************************************************************/ +#define REG_MSCR_OFFSET 0x2400 +#define MSCR_SCRUB_MOD_MASK 0xC0000000 /* scrub_mod - bit0:1*/ +#define MSCR_BACKGR_SCRUB 0x40000000 /* 01 */ +#define MSCR_SI_SHIFT 16 /* si - bit8:15*/ +#define MSCR_SI_MAX_VALUE 0xFF +#define MSCR_SI_MASK (MSCR_SI_MAX_VALUE << MSCR_SI_SHIFT) + +/************************************************************ + * Memory Scrub Range Start Register (MSRSR) + ************************************************************/ +#define REG_MSRSR_OFFSET 0x2410 + +/************************************************************ + * Memory Scrub Range End Register (MSRER) + ************************************************************/ +#define REG_MSRER_OFFSET 0x2420 + +/************************************************************ + * Memory Scrub Pattern Register (MSPR) + ************************************************************/ +#define REG_MSPR_OFFSET 0x2430 + +/************************************************************ + * Memory Check Control Register (MCCR) + ************************************************************/ +#define REG_MCCR_OFFSET 0x2440 +enum mccr_bits { + MCCR_ECC_EN = CPC925_BIT(0), /* ECC high and low check */ +}; + +/************************************************************ + * Memory Check Range End Register (MCRER) + ************************************************************/ +#define REG_MCRER_OFFSET 0x2450 + +/************************************************************ + * Memory Error Address Register (MEAR) + ************************************************************/ +#define REG_MEAR_OFFSET 0x2460 +#define MEAR_BCNT_MAX_VALUE 0x3 +#define MEAR_BCNT_SHIFT 30 +#define MEAR_BCNT_MASK (MEAR_BCNT_MAX_VALUE << MEAR_BCNT_SHIFT) +#define MEAR_RANK_MAX_VALUE 0x7 +#define MEAR_RANK_SHIFT 27 +#define MEAR_RANK_MASK (MEAR_RANK_MAX_VALUE << MEAR_RANK_SHIFT) +#define MEAR_COL_MAX_VALUE 0x7FF +#define MEAR_COL_SHIFT 16 +#define MEAR_COL_MASK (MEAR_COL_MAX_VALUE << MEAR_COL_SHIFT) +#define MEAR_BANK_MAX_VALUE 0x3 +#define MEAR_BANK_SHIFT 14 +#define MEAR_BANK_MASK (MEAR_BANK_MAX_VALUE << MEAR_BANK_SHIFT) +#define MEAR_ROW_MASK 0x00003FFF + +/************************************************************ + * Memory Error Syndrome Register (MESR) + ************************************************************/ +#define REG_MESR_OFFSET 0x2470 +#define MESR_ECC_SYN_H_MASK 0xFF00 +#define MESR_ECC_SYN_L_MASK 0x00FF + +/************************************************************ + * Memory Mode Control Register (MMCR) + ************************************************************/ +#define REG_MMCR_OFFSET 0x2500 +enum mmcr_bits { + MMCR_REG_DIMM_MODE = CPC925_BIT(3), +}; + +/* + * HyperTransport Link Registers + */ +/************************************************************ + * Error Handling/Enumeration Scratch Pad Register (ERRCTRL) + ************************************************************/ +#define REG_ERRCTRL_OFFSET 0x70140 +enum errctrl_bits { /* nonfatal interrupts for */ + ERRCTRL_SERR_NF = CPC925_BIT(0), /* system error */ + ERRCTRL_CRC_NF = CPC925_BIT(1), /* CRC error */ + ERRCTRL_RSP_NF = CPC925_BIT(2), /* Response error */ + ERRCTRL_EOC_NF = CPC925_BIT(3), /* End-Of-Chain error */ + ERRCTRL_OVF_NF = CPC925_BIT(4), /* Overflow error */ + ERRCTRL_PROT_NF = CPC925_BIT(5), /* Protocol error */ + + ERRCTRL_RSP_ERR = CPC925_BIT(6), /* Response error received */ + ERRCTRL_CHN_FAL = CPC925_BIT(7), /* Sync flooding detected */ + + HT_ERRCTRL_ENABLE = (ERRCTRL_SERR_NF | ERRCTRL_CRC_NF | + ERRCTRL_RSP_NF | ERRCTRL_EOC_NF | + ERRCTRL_OVF_NF | ERRCTRL_PROT_NF), + HT_ERRCTRL_DETECTED = (ERRCTRL_RSP_ERR | ERRCTRL_CHN_FAL), +}; + +/************************************************************ + * Link Configuration and Link Control Register (LINKCTRL) + ************************************************************/ +#define REG_LINKCTRL_OFFSET 0x70110 +enum linkctrl_bits { + LINKCTRL_CRC_ERR = (CPC925_BIT(22) | CPC925_BIT(23)), + LINKCTRL_LINK_FAIL = CPC925_BIT(27), + + HT_LINKCTRL_DETECTED = (LINKCTRL_CRC_ERR | LINKCTRL_LINK_FAIL), +}; + +/************************************************************ + * Link FreqCap/Error/Freq/Revision ID Register (LINKERR) + ************************************************************/ +#define REG_LINKERR_OFFSET 0x70120 +enum linkerr_bits { + LINKERR_EOC_ERR = CPC925_BIT(17), /* End-Of-Chain error */ + LINKERR_OVF_ERR = CPC925_BIT(18), /* Receive Buffer Overflow */ + LINKERR_PROT_ERR = CPC925_BIT(19), /* Protocol error */ + + HT_LINKERR_DETECTED = (LINKERR_EOC_ERR | LINKERR_OVF_ERR | + LINKERR_PROT_ERR), +}; + +/************************************************************ + * Bridge Control Register (BRGCTRL) + ************************************************************/ +#define REG_BRGCTRL_OFFSET 0x70300 +enum brgctrl_bits { + BRGCTRL_DETSERR = CPC925_BIT(0), /* SERR on Secondary Bus */ + BRGCTRL_SECBUSRESET = CPC925_BIT(9), /* Secondary Bus Reset */ +}; + +/* Private structure for edac memory controller */ +struct cpc925_mc_pdata { + void __iomem *vbase; + unsigned long total_mem; + const char *name; + int edac_idx; +}; + +/* Private structure for common edac device */ +struct cpc925_dev_info { + void __iomem *vbase; + struct platform_device *pdev; + char *ctl_name; + int edac_idx; + struct edac_device_ctl_info *edac_dev; + void (*init)(struct cpc925_dev_info *dev_info); + void (*exit)(struct cpc925_dev_info *dev_info); + void (*check)(struct edac_device_ctl_info *edac_dev); +}; + +/* Get total memory size from Open Firmware DTB */ +static void get_total_mem(struct cpc925_mc_pdata *pdata) +{ + struct device_node *np = NULL; + const unsigned int *reg, *reg_end; + int len, sw, aw; + unsigned long start, size; + + np = of_find_node_by_type(NULL, "memory"); + if (!np) + return; + + aw = of_n_addr_cells(np); + sw = of_n_size_cells(np); + reg = (const unsigned int *)of_get_property(np, "reg", &len); + reg_end = reg + len/4; + + pdata->total_mem = 0; + do { + start = of_read_number(reg, aw); + reg += aw; + size = of_read_number(reg, sw); + reg += sw; + debugf1("%s: start 0x%lx, size 0x%lx\n", __func__, + start, size); + pdata->total_mem += size; + } while (reg < reg_end); + + of_node_put(np); + debugf0("%s: total_mem 0x%lx\n", __func__, pdata->total_mem); +} + +static void cpc925_init_csrows(struct mem_ctl_info *mci) +{ + struct cpc925_mc_pdata *pdata = mci->pvt_info; + struct csrow_info *csrow; + int index; + u32 mbmr, mbbar, bba; + unsigned long row_size, last_nr_pages = 0; + + get_total_mem(pdata); + + for (index = 0; index < mci->nr_csrows; index++) { + mbmr = __raw_readl(pdata->vbase + REG_MBMR_OFFSET + + 0x20 * index); + mbbar = __raw_readl(pdata->vbase + REG_MBBAR_OFFSET + + 0x20 + index); + bba = (((mbmr & MBMR_BBA_MASK) >> MBMR_BBA_SHIFT) << 8) | + ((mbbar & MBBAR_BBA_MASK) >> MBBAR_BBA_SHIFT); + + if (bba == 0) + continue; /* not populated */ + + csrow = &mci->csrows[index]; + + row_size = bba * (1UL << 28); /* 256M */ + csrow->first_page = last_nr_pages; + csrow->nr_pages = row_size >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + csrow->nr_pages - 1; + last_nr_pages = csrow->last_page + 1; + + csrow->mtype = MEM_RDDR; + csrow->edac_mode = EDAC_SECDED; + + switch (csrow->nr_channels) { + case 1: /* Single channel */ + csrow->grain = 32; /* four-beat burst of 32 bytes */ + break; + case 2: /* Dual channel */ + default: + csrow->grain = 64; /* four-beat burst of 64 bytes */ + break; + } + + switch ((mbmr & MBMR_MODE_MASK) >> MBMR_MODE_SHIFT) { + case 6: /* 0110, no way to differentiate X8 VS X16 */ + case 5: /* 0101 */ + case 8: /* 1000 */ + csrow->dtype = DEV_X16; + break; + case 7: /* 0111 */ + case 9: /* 1001 */ + csrow->dtype = DEV_X8; + break; + default: + csrow->dtype = DEV_UNKNOWN; + break; + } + } +} + +/* Enable memory controller ECC detection */ +static void cpc925_mc_init(struct mem_ctl_info *mci) +{ + struct cpc925_mc_pdata *pdata = mci->pvt_info; + u32 apimask; + u32 mccr; + + /* Enable various ECC error exceptions */ + apimask = __raw_readl(pdata->vbase + REG_APIMASK_OFFSET); + if ((apimask & ECC_MASK_ENABLE) == 0) { + apimask |= ECC_MASK_ENABLE; + __raw_writel(apimask, pdata->vbase + REG_APIMASK_OFFSET); + } + + /* Enable ECC detection */ + mccr = __raw_readl(pdata->vbase + REG_MCCR_OFFSET); + if ((mccr & MCCR_ECC_EN) == 0) { + mccr |= MCCR_ECC_EN; + __raw_writel(mccr, pdata->vbase + REG_MCCR_OFFSET); + } +} + +/* Disable memory controller ECC detection */ +static void cpc925_mc_exit(struct mem_ctl_info *mci) +{ + /* + * WARNING: + * We are supposed to clear the ECC error detection bits, + * and it will be no problem to do so. However, once they + * are cleared here if we want to re-install CPC925 EDAC + * module later, setting them up in cpc925_mc_init() will + * trigger machine check exception. + * Also, it's ok to leave ECC error detection bits enabled, + * since they are reset to 1 by default or by boot loader. + */ + + return; +} + +/* + * Revert DDR column/row/bank addresses into page frame number and + * offset in page. + * + * Suppose memory mode is 0x0111(128-bit mode, identical DIMM pairs), + * physical address(PA) bits to column address(CA) bits mappings are: + * CA 0 1 2 3 4 5 6 7 8 9 10 + * PA 59 58 57 56 55 54 53 52 51 50 49 + * + * physical address(PA) bits to bank address(BA) bits mappings are: + * BA 0 1 + * PA 43 44 + * + * physical address(PA) bits to row address(RA) bits mappings are: + * RA 0 1 2 3 4 5 6 7 8 9 10 11 12 + * PA 36 35 34 48 47 46 45 40 41 42 39 38 37 + */ +static void cpc925_mc_get_pfn(struct mem_ctl_info *mci, u32 mear, + unsigned long *pfn, unsigned long *offset, int *csrow) +{ + u32 bcnt, rank, col, bank, row; + u32 c; + unsigned long pa; + int i; + + bcnt = (mear & MEAR_BCNT_MASK) >> MEAR_BCNT_SHIFT; + rank = (mear & MEAR_RANK_MASK) >> MEAR_RANK_SHIFT; + col = (mear & MEAR_COL_MASK) >> MEAR_COL_SHIFT; + bank = (mear & MEAR_BANK_MASK) >> MEAR_BANK_SHIFT; + row = mear & MEAR_ROW_MASK; + + *csrow = rank; + +#ifdef CONFIG_EDAC_DEBUG + if (mci->csrows[rank].first_page == 0) { + cpc925_mc_printk(mci, KERN_ERR, "ECC occurs in a " + "non-populated csrow, broken hardware?\n"); + return; + } +#endif + + /* Revert csrow number */ + pa = mci->csrows[rank].first_page << PAGE_SHIFT; + + /* Revert column address */ + col += bcnt; + for (i = 0; i < 11; i++) { + c = col & 0x1; + col >>= 1; + pa |= c << (14 - i); + } + + /* Revert bank address */ + pa |= bank << 19; + + /* Revert row address, in 4 steps */ + for (i = 0; i < 3; i++) { + c = row & 0x1; + row >>= 1; + pa |= c << (26 - i); + } + + for (i = 0; i < 3; i++) { + c = row & 0x1; + row >>= 1; + pa |= c << (21 + i); + } + + for (i = 0; i < 4; i++) { + c = row & 0x1; + row >>= 1; + pa |= c << (18 - i); + } + + for (i = 0; i < 3; i++) { + c = row & 0x1; + row >>= 1; + pa |= c << (29 - i); + } + + *offset = pa & (PAGE_SIZE - 1); + *pfn = pa >> PAGE_SHIFT; + + debugf0("%s: ECC physical address 0x%lx\n", __func__, pa); +} + +static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome) +{ + if ((syndrome & MESR_ECC_SYN_H_MASK) == 0) + return 0; + + if ((syndrome & MESR_ECC_SYN_L_MASK) == 0) + return 1; + + cpc925_mc_printk(mci, KERN_INFO, "Unexpected syndrome value: 0x%x\n", + syndrome); + return 1; +} + +/* Check memory controller registers for ECC errors */ +static void cpc925_mc_check(struct mem_ctl_info *mci) +{ + struct cpc925_mc_pdata *pdata = mci->pvt_info; + u32 apiexcp; + u32 mear; + u32 mesr; + u16 syndrome; + unsigned long pfn = 0, offset = 0; + int csrow = 0, channel = 0; + + /* APIEXCP is cleared when read */ + apiexcp = __raw_readl(pdata->vbase + REG_APIEXCP_OFFSET); + if ((apiexcp & ECC_EXCP_DETECTED) == 0) + return; + + mesr = __raw_readl(pdata->vbase + REG_MESR_OFFSET); + syndrome = mesr | (MESR_ECC_SYN_H_MASK | MESR_ECC_SYN_L_MASK); + + mear = __raw_readl(pdata->vbase + REG_MEAR_OFFSET); + + /* Revert column/row addresses into page frame number, etc */ + cpc925_mc_get_pfn(mci, mear, &pfn, &offset, &csrow); + + if (apiexcp & CECC_EXCP_DETECTED) { + cpc925_mc_printk(mci, KERN_INFO, "DRAM CECC Fault\n"); + channel = cpc925_mc_find_channel(mci, syndrome); + edac_mc_handle_ce(mci, pfn, offset, syndrome, + csrow, channel, mci->ctl_name); + } + + if (apiexcp & UECC_EXCP_DETECTED) { + cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n"); + edac_mc_handle_ue(mci, pfn, offset, csrow, mci->ctl_name); + } + + cpc925_mc_printk(mci, KERN_INFO, "Dump registers:\n"); + cpc925_mc_printk(mci, KERN_INFO, "APIMASK 0x%08x\n", + __raw_readl(pdata->vbase + REG_APIMASK_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "APIEXCP 0x%08x\n", + apiexcp); + cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Ctrl 0x%08x\n", + __raw_readl(pdata->vbase + REG_MSCR_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge Start 0x%08x\n", + __raw_readl(pdata->vbase + REG_MSRSR_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge End 0x%08x\n", + __raw_readl(pdata->vbase + REG_MSRER_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Pattern 0x%08x\n", + __raw_readl(pdata->vbase + REG_MSPR_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Ctrl 0x%08x\n", + __raw_readl(pdata->vbase + REG_MCCR_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Rge End 0x%08x\n", + __raw_readl(pdata->vbase + REG_MCRER_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Err Address 0x%08x\n", + mesr); + cpc925_mc_printk(mci, KERN_INFO, "Mem Err Syndrome 0x%08x\n", + syndrome); +} + +/******************** CPU err device********************************/ +/* Enable CPU Errors detection */ +static void cpc925_cpu_init(struct cpc925_dev_info *dev_info) +{ + u32 apimask; + + apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET); + if ((apimask & CPU_MASK_ENABLE) == 0) { + apimask |= CPU_MASK_ENABLE; + __raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET); + } +} + +/* Disable CPU Errors detection */ +static void cpc925_cpu_exit(struct cpc925_dev_info *dev_info) +{ + /* + * WARNING: + * We are supposed to clear the CPU error detection bits, + * and it will be no problem to do so. However, once they + * are cleared here if we want to re-install CPC925 EDAC + * module later, setting them up in cpc925_cpu_init() will + * trigger machine check exception. + * Also, it's ok to leave CPU error detection bits enabled, + * since they are reset to 1 by default. + */ + + return; +} + +/* Check for CPU Errors */ +static void cpc925_cpu_check(struct edac_device_ctl_info *edac_dev) +{ + struct cpc925_dev_info *dev_info = edac_dev->pvt_info; + u32 apiexcp; + u32 apimask; + + /* APIEXCP is cleared when read */ + apiexcp = __raw_readl(dev_info->vbase + REG_APIEXCP_OFFSET); + if ((apiexcp & CPU_EXCP_DETECTED) == 0) + return; + + apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET); + cpc925_printk(KERN_INFO, "Processor Interface Fault\n" + "Processor Interface register dump:\n"); + cpc925_printk(KERN_INFO, "APIMASK 0x%08x\n", apimask); + cpc925_printk(KERN_INFO, "APIEXCP 0x%08x\n", apiexcp); + + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); +} + +/******************** HT Link err device****************************/ +/* Enable HyperTransport Link Error detection */ +static void cpc925_htlink_init(struct cpc925_dev_info *dev_info) +{ + u32 ht_errctrl; + + ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); + if ((ht_errctrl & HT_ERRCTRL_ENABLE) == 0) { + ht_errctrl |= HT_ERRCTRL_ENABLE; + __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET); + } +} + +/* Disable HyperTransport Link Error detection */ +static void cpc925_htlink_exit(struct cpc925_dev_info *dev_info) +{ + u32 ht_errctrl; + + ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); + ht_errctrl &= ~HT_ERRCTRL_ENABLE; + __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET); +} + +/* Check for HyperTransport Link errors */ +static void cpc925_htlink_check(struct edac_device_ctl_info *edac_dev) +{ + struct cpc925_dev_info *dev_info = edac_dev->pvt_info; + u32 brgctrl = __raw_readl(dev_info->vbase + REG_BRGCTRL_OFFSET); + u32 linkctrl = __raw_readl(dev_info->vbase + REG_LINKCTRL_OFFSET); + u32 errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); + u32 linkerr = __raw_readl(dev_info->vbase + REG_LINKERR_OFFSET); + + if (!((brgctrl & BRGCTRL_DETSERR) || + (linkctrl & HT_LINKCTRL_DETECTED) || + (errctrl & HT_ERRCTRL_DETECTED) || + (linkerr & HT_LINKERR_DETECTED))) + return; + + cpc925_printk(KERN_INFO, "HT Link Fault\n" + "HT register dump:\n"); + cpc925_printk(KERN_INFO, "Bridge Ctrl 0x%08x\n", + brgctrl); + cpc925_printk(KERN_INFO, "Link Config Ctrl 0x%08x\n", + linkctrl); + cpc925_printk(KERN_INFO, "Error Enum and Ctrl 0x%08x\n", + errctrl); + cpc925_printk(KERN_INFO, "Link Error 0x%08x\n", + linkerr); + + /* Clear by write 1 */ + if (brgctrl & BRGCTRL_DETSERR) + __raw_writel(BRGCTRL_DETSERR, + dev_info->vbase + REG_BRGCTRL_OFFSET); + + if (linkctrl & HT_LINKCTRL_DETECTED) + __raw_writel(HT_LINKCTRL_DETECTED, + dev_info->vbase + REG_LINKCTRL_OFFSET); + + /* Initiate Secondary Bus Reset to clear the chain failure */ + if (errctrl & ERRCTRL_CHN_FAL) + __raw_writel(BRGCTRL_SECBUSRESET, + dev_info->vbase + REG_BRGCTRL_OFFSET); + + if (errctrl & ERRCTRL_RSP_ERR) + __raw_writel(ERRCTRL_RSP_ERR, + dev_info->vbase + REG_ERRCTRL_OFFSET); + + if (linkerr & HT_LINKERR_DETECTED) + __raw_writel(HT_LINKERR_DETECTED, + dev_info->vbase + REG_LINKERR_OFFSET); + + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); +} + +static struct cpc925_dev_info cpc925_devs[] = { + { + .ctl_name = CPC925_CPU_ERR_DEV, + .init = cpc925_cpu_init, + .exit = cpc925_cpu_exit, + .check = cpc925_cpu_check, + }, + { + .ctl_name = CPC925_HT_LINK_DEV, + .init = cpc925_htlink_init, + .exit = cpc925_htlink_exit, + .check = cpc925_htlink_check, + }, + {0}, /* Terminated by NULL */ +}; + +/* + * Add CPU Err detection and HyperTransport Link Err detection + * as common "edac_device", they have no corresponding device + * nodes in the Open Firmware DTB and we have to add platform + * devices for them. Also, they will share the MMIO with that + * of memory controller. + */ +static void cpc925_add_edac_devices(void __iomem *vbase) +{ + struct cpc925_dev_info *dev_info; + + if (!vbase) { + cpc925_printk(KERN_ERR, "MMIO not established yet\n"); + return; + } + + for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) { + dev_info->vbase = vbase; + dev_info->pdev = platform_device_register_simple( + dev_info->ctl_name, 0, NULL, 0); + if (IS_ERR(dev_info->pdev)) { + cpc925_printk(KERN_ERR, + "Can't register platform device for %s\n", + dev_info->ctl_name); + continue; + } + + /* + * Don't have to allocate private structure but + * make use of cpc925_devs[] instead. + */ + dev_info->edac_idx = edac_device_alloc_index(); + dev_info->edac_dev = + edac_device_alloc_ctl_info(0, dev_info->ctl_name, + 1, NULL, 0, 0, NULL, 0, dev_info->edac_idx); + if (!dev_info->edac_dev) { + cpc925_printk(KERN_ERR, "No memory for edac device\n"); + goto err1; + } + + dev_info->edac_dev->pvt_info = dev_info; + dev_info->edac_dev->dev = &dev_info->pdev->dev; + dev_info->edac_dev->ctl_name = dev_info->ctl_name; + dev_info->edac_dev->mod_name = CPC925_EDAC_MOD_STR; + dev_info->edac_dev->dev_name = dev_name(&dev_info->pdev->dev); + + if (edac_op_state == EDAC_OPSTATE_POLL) + dev_info->edac_dev->edac_check = dev_info->check; + + if (dev_info->init) + dev_info->init(dev_info); + + if (edac_device_add_device(dev_info->edac_dev) > 0) { + cpc925_printk(KERN_ERR, + "Unable to add edac device for %s\n", + dev_info->ctl_name); + goto err2; + } + + debugf0("%s: Successfully added edac device for %s\n", + __func__, dev_info->ctl_name); + + continue; + +err2: + if (dev_info->exit) + dev_info->exit(dev_info); + edac_device_free_ctl_info(dev_info->edac_dev); +err1: + platform_device_unregister(dev_info->pdev); + } +} + +/* + * Delete the common "edac_device" for CPU Err Detection + * and HyperTransport Link Err Detection + */ +static void cpc925_del_edac_devices(void) +{ + struct cpc925_dev_info *dev_info; + + for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) { + if (dev_info->edac_dev) { + edac_device_del_device(dev_info->edac_dev->dev); + edac_device_free_ctl_info(dev_info->edac_dev); + platform_device_unregister(dev_info->pdev); + } + + if (dev_info->exit) + dev_info->exit(dev_info); + + debugf0("%s: Successfully deleted edac device for %s\n", + __func__, dev_info->ctl_name); + } +} + +/* Convert current back-ground scrub rate into byte/sec bandwith */ +static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw) +{ + struct cpc925_mc_pdata *pdata = mci->pvt_info; + u32 mscr; + u8 si; + + mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET); + si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT; + + debugf0("%s, Mem Scrub Ctrl Register 0x%x\n", __func__, mscr); + + if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) || + (si == 0)) { + cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n"); + *bw = 0; + } else + *bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si; + + return 0; +} + +/* Return 0 for single channel; 1 for dual channel */ +static int cpc925_mc_get_channels(void __iomem *vbase) +{ + int dual = 0; + u32 mbcr; + + mbcr = __raw_readl(vbase + REG_MBCR_OFFSET); + + /* + * Dual channel only when 128-bit wide physical bus + * and 128-bit configuration. + */ + if (((mbcr & MBCR_64BITCFG_MASK) == 0) && + ((mbcr & MBCR_64BITBUS_MASK) == 0)) + dual = 1; + + debugf0("%s: %s channel\n", __func__, + (dual > 0) ? "Dual" : "Single"); + + return dual; +} + +static int __devinit cpc925_probe(struct platform_device *pdev) +{ + static int edac_mc_idx; + struct mem_ctl_info *mci; + void __iomem *vbase; + struct cpc925_mc_pdata *pdata; + struct resource *r; + int res = 0, nr_channels; + + debugf0("%s: %s platform device found!\n", __func__, pdev->name); + + if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) { + res = -ENOMEM; + goto out; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + cpc925_printk(KERN_ERR, "Unable to get resource\n"); + res = -ENOENT; + goto err1; + } + + if (!devm_request_mem_region(&pdev->dev, + r->start, + r->end - r->start + 1, + pdev->name)) { + cpc925_printk(KERN_ERR, "Unable to request mem region\n"); + res = -EBUSY; + goto err1; + } + + vbase = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1); + if (!vbase) { + cpc925_printk(KERN_ERR, "Unable to ioremap device\n"); + res = -ENOMEM; + goto err2; + } + + nr_channels = cpc925_mc_get_channels(vbase); + mci = edac_mc_alloc(sizeof(struct cpc925_mc_pdata), + CPC925_NR_CSROWS, nr_channels + 1, edac_mc_idx); + if (!mci) { + cpc925_printk(KERN_ERR, "No memory for mem_ctl_info\n"); + res = -ENOMEM; + goto err2; + } + + pdata = mci->pvt_info; + pdata->vbase = vbase; + pdata->edac_idx = edac_mc_idx++; + pdata->name = pdev->name; + + mci->dev = &pdev->dev; + platform_set_drvdata(pdev, mci); + mci->dev_name = dev_name(&pdev->dev); + mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = CPC925_EDAC_MOD_STR; + mci->mod_ver = CPC925_EDAC_REVISION; + mci->ctl_name = pdev->name; + + if (edac_op_state == EDAC_OPSTATE_POLL) + mci->edac_check = cpc925_mc_check; + + mci->ctl_page_to_phys = NULL; + mci->scrub_mode = SCRUB_SW_SRC; + mci->set_sdram_scrub_rate = NULL; + mci->get_sdram_scrub_rate = cpc925_get_sdram_scrub_rate; + + cpc925_init_csrows(mci); + + /* Setup memory controller registers */ + cpc925_mc_init(mci); + + if (edac_mc_add_mc(mci) > 0) { + cpc925_mc_printk(mci, KERN_ERR, "Failed edac_mc_add_mc()\n"); + goto err3; + } + + cpc925_add_edac_devices(vbase); + + /* get this far and it's successful */ + debugf0("%s: success\n", __func__); + + res = 0; + goto out; + +err3: + cpc925_mc_exit(mci); + edac_mc_free(mci); +err2: + devm_release_mem_region(&pdev->dev, r->start, r->end-r->start+1); +err1: + devres_release_group(&pdev->dev, cpc925_probe); +out: + return res; +} + +static int cpc925_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + /* + * Delete common edac devices before edac mc, because + * the former share the MMIO of the latter. + */ + cpc925_del_edac_devices(); + cpc925_mc_exit(mci); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + + return 0; +} + +static struct platform_driver cpc925_edac_driver = { + .probe = cpc925_probe, + .remove = cpc925_remove, + .driver = { + .name = "cpc925_edac", + } +}; + +static int __init cpc925_edac_init(void) +{ + int ret = 0; + + printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n"); + printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n"); + + /* Only support POLL mode so far */ + edac_op_state = EDAC_OPSTATE_POLL; + + ret = platform_driver_register(&cpc925_edac_driver); + if (ret) { + printk(KERN_WARNING "Failed to register %s\n", + CPC925_EDAC_MOD_STR); + } + + return ret; +} + +static void __exit cpc925_edac_exit(void) +{ + platform_driver_unregister(&cpc925_edac_driver); +} + +module_init(cpc925_edac_init); +module_exit(cpc925_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>"); +MODULE_DESCRIPTION("IBM CPC925 Bridge and MC EDAC kernel module"); diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 48d3b1409834..3493c6bdb820 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -841,6 +841,7 @@ extern void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev, int inst_nr, int block_nr, const char *msg); extern void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev, int inst_nr, int block_nr, const char *msg); +extern int edac_device_alloc_index(void); /* * edac_pci APIs diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index a7d2c717d033..b02a6a69a8f0 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -490,6 +490,20 @@ void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev, mutex_unlock(&device_ctls_mutex); } +/* + * edac_device_alloc_index: Allocate a unique device index number + * + * Return: + * allocated index number + */ +int edac_device_alloc_index(void) +{ + static atomic_t device_indexes = ATOMIC_INIT(0); + + return atomic_inc_return(&device_indexes) - 1; +} +EXPORT_SYMBOL_GPL(edac_device_alloc_index); + /** * edac_device_add_device: Insert the 'edac_dev' structure into the * edac_device global list and create sysfs entries associated with |