diff options
Diffstat (limited to 'drivers/char/ser_a2232.c')
| -rw-r--r-- | drivers/char/ser_a2232.c | 831 |
1 files changed, 0 insertions, 831 deletions
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c deleted file mode 100644 index 3f47c2ead8e5..000000000000 --- a/drivers/char/ser_a2232.c +++ /dev/null @@ -1,831 +0,0 @@ -/* drivers/char/ser_a2232.c */ - -/* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ - -/* Linux serial driver for the Amiga A2232 board */ - -/* This driver is MAINTAINED. Before applying any changes, please contact - * the author. - */ - -/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de> - * alias The A2232 driver project <A2232@gmx.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -/***************************** Documentation ************************/ -/* - * This driver is in EXPERIMENTAL state. That means I could not find - * someone with five A2232 boards with 35 ports running at 19200 bps - * at the same time and test the machine's behaviour. - * However, I know that you can performance-tweak this driver (see - * the source code). - * One thing to consider is the time this driver consumes during the - * Amiga's vertical blank interrupt. Everything that is to be done - * _IS DONE_ when entering the vertical blank interrupt handler of - * this driver. - * However, it would be more sane to only do the job for only ONE card - * instead of ALL cards at a time; or, more generally, to handle only - * SOME ports instead of ALL ports at a time. - * However, as long as no-one runs into problems I guess I shouldn't - * change the driver as it runs fine for me :) . - * - * Version history of this file: - * 0.4 Resolved licensing issues. - * 0.3 Inclusion in the Linux/m68k tree, small fixes. - * 0.2 Added documentation, minor typo fixes. - * 0.1 Initial release. - * - * TO DO: - * - Handle incoming BREAK events. I guess "Stevens: Advanced - * Programming in the UNIX(R) Environment" is a good reference - * on what is to be done. - * - When installing as a module, don't simply 'printk' text, but - * send it to the TTY used by the user. - * - * THANKS TO: - * - Jukka Marin (65EC02 code). - * - The other NetBSD developers on whose A2232 driver I had a - * pretty close look. However, I didn't copy any code so it - * is okay to put my code under the GPL and include it into - * Linux. - */ -/***************************** End of Documentation *****************/ - -/***************************** Defines ******************************/ -/* - * Enables experimental 115200 (normal) 230400 (turbo) baud rate. - * The A2232 specification states it can only operate at speeds up to - * 19200 bits per second, and I was not able to send a file via - * "sz"/"rz" and a null-modem cable from one A2232 port to another - * at 115200 bits per second. - * However, this might work for you. - */ -#undef A2232_SPEEDHACK -/* - * Default is not to use RTS/CTS so you could be talked to death. - */ -#define A2232_SUPPRESS_RTSCTS_WARNING -/************************* End of Defines ***************************/ - -/***************************** Includes *****************************/ -#include <linux/module.h> - -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/tty.h> - -#include <asm/setup.h> -#include <asm/amigaints.h> -#include <asm/amigahw.h> -#include <linux/zorro.h> -#include <asm/irq.h> -#include <linux/mutex.h> - -#include <linux/delay.h> - -#include <linux/serial.h> -#include <linux/generic_serial.h> -#include <linux/tty_flip.h> - -#include "ser_a2232.h" -#include "ser_a2232fw.h" -/************************* End of Includes **************************/ - -/***************************** Prototypes ***************************/ -/* The interrupt service routine */ -static irqreturn_t a2232_vbl_inter(int irq, void *data); -/* Initialize the port structures */ -static void a2232_init_portstructs(void); -/* Initialize and register TTY drivers. */ -/* returns 0 IFF successful */ -static int a2232_init_drivers(void); - -/* BEGIN GENERIC_SERIAL PROTOTYPES */ -static void a2232_disable_tx_interrupts(void *ptr); -static void a2232_enable_tx_interrupts(void *ptr); -static void a2232_disable_rx_interrupts(void *ptr); -static void a2232_enable_rx_interrupts(void *ptr); -static int a2232_carrier_raised(struct tty_port *port); -static void a2232_shutdown_port(void *ptr); -static int a2232_set_real_termios(void *ptr); -static int a2232_chars_in_buffer(void *ptr); -static void a2232_close(void *ptr); -static void a2232_hungup(void *ptr); -/* static void a2232_getserial (void *ptr, struct serial_struct *sp); */ -/* END GENERIC_SERIAL PROTOTYPES */ - -/* Functions that the TTY driver struct expects */ -static int a2232_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static void a2232_throttle(struct tty_struct *tty); -static void a2232_unthrottle(struct tty_struct *tty); -static int a2232_open(struct tty_struct * tty, struct file * filp); -/************************* End of Prototypes ************************/ - -/***************************** Global variables *********************/ -/*--------------------------------------------------------------------------- - * Interface from generic_serial.c back here - *--------------------------------------------------------------------------*/ -static struct real_driver a2232_real_driver = { - a2232_disable_tx_interrupts, - a2232_enable_tx_interrupts, - a2232_disable_rx_interrupts, - a2232_enable_rx_interrupts, - a2232_shutdown_port, - a2232_set_real_termios, - a2232_chars_in_buffer, - a2232_close, - a2232_hungup, - NULL /* a2232_getserial */ -}; - -static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own. - -/* Ports structs */ -static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES]; - -/* TTY driver structs */ -static struct tty_driver *a2232_driver; - -/* nr of cards completely (all ports) and correctly configured */ -static int nr_a2232; - -/* zorro_dev structs for the A2232's */ -static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS]; -/***************************** End of Global variables **************/ - -/* Helper functions */ - -static inline volatile struct a2232memory *a2232mem(unsigned int board) -{ - return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start); -} - -static inline volatile struct a2232status *a2232stat(unsigned int board, - unsigned int portonboard) -{ - volatile struct a2232memory *mem = a2232mem(board); - return &(mem->Status[portonboard]); -} - -static inline void a2232_receive_char(struct a2232_port *port, int ch, int err) -{ -/* Mostly stolen from other drivers. - Maybe one could implement a more efficient version by not only - transferring one character at a time. -*/ - struct tty_struct *tty = port->gs.port.tty; - -#if 0 - switch(err) { - case TTY_BREAK: - break; - case TTY_PARITY: - break; - case TTY_OVERRUN: - break; - case TTY_FRAME: - break; - } -#endif - - tty_insert_flip_char(tty, ch, err); - tty_flip_buffer_push(tty); -} - -/***************************** Functions ****************************/ -/*** BEGIN OF REAL_DRIVER FUNCTIONS ***/ - -static void a2232_disable_tx_interrupts(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - stat->OutDisable = -1; - - /* Does this here really have to be? */ - local_irq_save(flags); - port->gs.port.flags &= ~GS_TX_INTEN; - local_irq_restore(flags); -} - -static void a2232_enable_tx_interrupts(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - stat->OutDisable = 0; - - /* Does this here really have to be? */ - local_irq_save(flags); - port->gs.port.flags |= GS_TX_INTEN; - local_irq_restore(flags); -} - -static void a2232_disable_rx_interrupts(void *ptr) -{ - struct a2232_port *port; - port = ptr; - port->disable_rx = -1; -} - -static void a2232_enable_rx_interrupts(void *ptr) -{ - struct a2232_port *port; - port = ptr; - port->disable_rx = 0; -} - -static int a2232_carrier_raised(struct tty_port *port) -{ - struct a2232_port *ap = container_of(port, struct a2232_port, gs.port); - return ap->cd_status; -} - -static void a2232_shutdown_port(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - - local_irq_save(flags); - - port->gs.port.flags &= ~GS_ACTIVE; - - if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { - /* Set DTR and RTS to Low, flush output. - The NetBSD driver "msc.c" does it this way. */ - stat->Command = ( (stat->Command & ~A2232CMD_CMask) | - A2232CMD_Close ); - stat->OutFlush = -1; - stat->Setup = -1; - } - - local_irq_restore(flags); - - /* After analyzing control flow, I think a2232_shutdown_port - is actually the last call from the system when at application - level someone issues a "echo Hello >>/dev/ttyY0". - Therefore I think the MOD_DEC_USE_COUNT should be here and - not in "a2232_close()". See the comment in "sx.c", too. - If you run into problems, compile this driver into the - kernel instead of compiling it as a module. */ -} - -static int a2232_set_real_termios(void *ptr) -{ - unsigned int cflag, baud, chsize, stopb, parity, softflow; - int rate; - int a2232_param, a2232_cmd; - unsigned long flags; - unsigned int i; - struct a2232_port *port = ptr; - volatile struct a2232status *status; - volatile struct a2232memory *mem; - - if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; - - status = a2232stat(port->which_a2232, port->which_port_on_a2232); - mem = a2232mem(port->which_a2232); - - a2232_param = a2232_cmd = 0; - - // get baud rate - baud = port->gs.baud; - if (baud == 0) { - /* speed == 0 -> drop DTR, do nothing else */ - local_irq_save(flags); - // Clear DTR (and RTS... mhhh). - status->Command = ( (status->Command & ~A2232CMD_CMask) | - A2232CMD_Close ); - status->OutFlush = -1; - status->Setup = -1; - - local_irq_restore(flags); - return 0; - } - - rate = A2232_BAUD_TABLE_NOAVAIL; - for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){ - if (a2232_baud_table[i] == baud){ - if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2]; - else rate = a2232_baud_table[i+1]; - } - } - if (rate == A2232_BAUD_TABLE_NOAVAIL){ - printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud); - // This is useful for both (turbo or normal) Crystal versions. - rate = A2232PARAM_B9600; - } - a2232_param |= rate; - - cflag = port->gs.port.tty->termios->c_cflag; - - // get character size - chsize = cflag & CSIZE; - switch (chsize){ - case CS8: a2232_param |= A2232PARAM_8Bit; break; - case CS7: a2232_param |= A2232PARAM_7Bit; break; - case CS6: a2232_param |= A2232PARAM_6Bit; break; - case CS5: a2232_param |= A2232PARAM_5Bit; break; - default: printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n", - port->which_a2232,port->which_port_on_a2232,chsize); - a2232_param |= A2232PARAM_8Bit; break; - } - - // get number of stop bits - stopb = cflag & CSTOPB; - if (stopb){ // two stop bits instead of one - printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n", - port->which_a2232,port->which_port_on_a2232); - } - - // Warn if RTS/CTS not wanted - if (!(cflag & CRTSCTS)){ -#ifndef A2232_SUPPRESS_RTSCTS_WARNING - printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n", - port->which_a2232,port->which_port_on_a2232); -#endif - } - - /* I think this is correct. - However, IXOFF means _input_ flow control and I wonder - if one should care about IXON _output_ flow control, - too. If this makes problems, one should turn the A2232 - firmware XON/XOFF "SoftFlow" flow control off and use - the conventional way of inserting START/STOP characters - by hand in throttle()/unthrottle(). - */ - softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF ); - - // get Parity (Enabled/Disabled? If Enabled, Odd or Even?) - parity = cflag & (PARENB | PARODD); - if (parity & PARENB){ - if (parity & PARODD){ - a2232_cmd |= A2232CMD_OddParity; - } - else{ - a2232_cmd |= A2232CMD_EvenParity; - } - } - else a2232_cmd |= A2232CMD_NoParity; - - - /* Hmm. Maybe an own a2232_port structure - member would be cleaner? */ - if (cflag & CLOCAL) - port->gs.port.flags &= ~ASYNC_CHECK_CD; - else - port->gs.port.flags |= ASYNC_CHECK_CD; - - - /* Now we have all parameters and can go to set them: */ - local_irq_save(flags); - - status->Param = a2232_param | A2232PARAM_RcvBaud; - status->Command = a2232_cmd | A2232CMD_Open | A2232CMD_Enable; - status->SoftFlow = softflow; - status->OutDisable = 0; - status->Setup = -1; - - local_irq_restore(flags); - return 0; -} - -static int a2232_chars_in_buffer(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *status; - unsigned char ret; /* we need modulo-256 arithmetics */ - port = ptr; - status = a2232stat(port->which_a2232, port->which_port_on_a2232); -#if A2232_IOBUFLEN != 256 -#error "Re-Implement a2232_chars_in_buffer()!" -#endif - ret = (status->OutHead - status->OutTail); - return ret; -} - -static void a2232_close(void *ptr) -{ - a2232_disable_tx_interrupts(ptr); - a2232_disable_rx_interrupts(ptr); - /* see the comment in a2232_shutdown_port above. */ -} - -static void a2232_hungup(void *ptr) -{ - a2232_close(ptr); -} -/*** END OF REAL_DRIVER FUNCTIONS ***/ - -/*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ -static int a2232_ioctl( struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; -} - -static void a2232_throttle(struct tty_struct *tty) -{ -/* Throttle: System cannot take another chars: Drop RTS or - send the STOP char or whatever. - The A2232 firmware does RTS/CTS anyway, and XON/XOFF - if switched on. So the only thing we can do at this - layer here is not taking any characters out of the - A2232 buffer any more. */ - struct a2232_port *port = tty->driver_data; - port->throttle_input = -1; -} - -static void a2232_unthrottle(struct tty_struct *tty) -{ -/* Unthrottle: dual to "throttle()" above. */ - struct a2232_port *port = tty->driver_data; - port->throttle_input = 0; -} - -static int a2232_open(struct tty_struct * tty, struct file * filp) -{ -/* More or less stolen from other drivers. */ - int line; - int retval; - struct a2232_port *port; - - line = tty->index; - port = &a2232_ports[line]; - - tty->driver_data = port; - port->gs.port.tty = tty; - port->gs.port.count++; - retval = gs_init_port(&port->gs); - if (retval) { - port->gs.port.count--; - return retval; - } - port->gs.port.flags |= GS_ACTIVE; - retval = gs_block_til_ready(port, filp); - - if (retval) { - port->gs.port.count--; - return retval; - } - - a2232_enable_rx_interrupts(port); - - return 0; -} -/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ - -static irqreturn_t a2232_vbl_inter(int irq, void *data) -{ -#if A2232_IOBUFLEN != 256 -#error "Re-Implement a2232_vbl_inter()!" -#endif - -struct a2232_port *port; -volatile struct a2232memory *mem; -volatile struct a2232status *status; -unsigned char newhead; -unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */ -unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */ -volatile u_char *ibuf, *cbuf, *obuf; -int ch, err, n, p; - for (n = 0; n < nr_a2232; n++){ /* for every completely initialized A2232 board */ - mem = a2232mem(n); - for (p = 0; p < NUMLINES; p++){ /* for every port on this board */ - err = 0; - port = &a2232_ports[n*NUMLINES+p]; - if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */ - - status = a2232stat(n,p); - - if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */ - newhead = status->InHead; /* 65EC02 write pointer */ - bufpos = status->InTail; - - /* check for input for this port */ - if (newhead != bufpos) { - /* buffer for input chars/events */ - ibuf = mem->InBuf[p]; - - /* data types of bytes in ibuf */ - cbuf = mem->InCtl[p]; - - /* do for all chars */ - while (bufpos != newhead) { - /* which type of input data? */ - switch (cbuf[bufpos]) { - /* switch on input event (CD, BREAK, etc.) */ - case A2232INCTL_EVENT: - switch (ibuf[bufpos++]) { - case A2232EVENT_Break: - /* TODO: Handle BREAK signal */ - break; - /* A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are - handled in a separate queue and should not occur here. */ - case A2232EVENT_Sync: - printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring."); - break; - default: - printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]); - } /* event type switch */ - break; - case A2232INCTL_CHAR: - /* Receive incoming char */ - a2232_receive_char(port, ibuf[bufpos], err); - bufpos++; - break; - default: - printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]); - bufpos++; - } /* switch on input data type */ - } /* while there's something in the buffer */ - - status->InTail = bufpos; /* tell 65EC02 what we've read */ - - } /* if there was something in the buffer */ - } /* If input is not disabled */ - - /* Now check if there's something to output */ - obuf = mem->OutBuf[p]; - bufpos = status->OutHead; - while ( (port->gs.xmit_cnt > 0) && - (!port->gs.port.tty->stopped) && - (!port->gs.port.tty->hw_stopped) ){ /* While there are chars to transmit */ - if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */ - ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */ - port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */ - obuf[bufpos++] = ch; /* put it into the A2232 buffer */ - port->gs.xmit_cnt--; - } - else{ /* If A2232 the buffer is full */ - break; /* simply stop filling it. */ - } - } - status->OutHead = bufpos; - - /* WakeUp if output buffer runs low */ - if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { - tty_wakeup(port->gs.port.tty); - } - } // if the port is used - } // for every port on the board - - /* Now check the CD message queue */ - newhead = mem->Common.CDHead; - bufpos = mem->Common.CDTail; - if (newhead != bufpos){ /* There are CD events in queue */ - ocd = mem->Common.CDStatus; /* get old status bits */ - while (newhead != bufpos){ /* read all events */ - ncd = mem->CDBuf[bufpos++]; /* get one event */ - ccd = ncd ^ ocd; /* mask of changed lines */ - ocd = ncd; /* save new status bits */ - for(p=0; p < NUMLINES; p++){ /* for all ports */ - if (ccd & 1){ /* this one changed */ - - struct a2232_port *port = &a2232_ports[n*7+p]; - port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */ - - if (!(port->gs.port.flags & ASYNC_CHECK_CD)) - ; /* Don't report DCD changes */ - else if (port->cd_status) { // if DCD on: DCD went UP! - - /* Are we blocking in open?*/ - wake_up_interruptible(&port->gs.port.open_wait); - } - else { // if DCD off: DCD went DOWN! - if (port->gs.port.tty) - tty_hangup (port->gs.port.tty); - } - - } // if CD changed for this port - ccd >>= 1; - ncd >>= 1; /* Shift bits for next line */ - } // for every port - } // while CD events in queue - mem->Common.CDStatus = ocd; /* save new status */ - mem->Common.CDTail = bufpos; /* remove events */ - } // if events in CD queue - - } // for every completely initialized A2232 board - return IRQ_HANDLED; -} - -static const struct tty_port_operations a2232_port_ops = { - .carrier_raised = a2232_carrier_raised, -}; - -static void a2232_init_portstructs(void) -{ - struct a2232_port *port; - int i; - - for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { - port = a2232_ports + i; - tty_port_init(&port->gs.port); - port->gs.port.ops = &a2232_port_ops; - port->which_a2232 = i/NUMLINES; - port->which_port_on_a2232 = i%NUMLINES; - port->disable_rx = port->throttle_input = port->cd_status = 0; - port->gs.magic = A2232_MAGIC; - port->gs.close_delay = HZ/2; - port->gs.closing_wait = 30 * HZ; - port->gs.rd = &a2232_real_driver; - } -} - -static const struct tty_operations a2232_ops = { - .open = a2232_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = a2232_ioctl, - .throttle = a2232_throttle, - .unthrottle = a2232_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, -}; - -static int a2232_init_drivers(void) -{ - int error; - - a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232); - if (!a2232_driver) - return -ENOMEM; - a2232_driver->owner = THIS_MODULE; - a2232_driver->driver_name = "commodore_a2232"; - a2232_driver->name = "ttyY"; - a2232_driver->major = A2232_NORMAL_MAJOR; - a2232_driver->type = TTY_DRIVER_TYPE_SERIAL; - a2232_driver->subtype = SERIAL_TYPE_NORMAL; - a2232_driver->init_termios = tty_std_termios; - a2232_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - a2232_driver->init_termios.c_ispeed = 9600; - a2232_driver->init_termios.c_ospeed = 9600; - a2232_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(a2232_driver, &a2232_ops); - if ((error = tty_register_driver(a2232_driver))) { - printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n", - error); - put_tty_driver(a2232_driver); - return 1; - } - return 0; -} - -static int __init a2232board_init(void) -{ - struct zorro_dev *z; - - unsigned int boardaddr; - int bcount; - short start; - u_char *from; - volatile u_char *to; - volatile struct a2232memory *mem; - int error, i; - -#ifdef CONFIG_SMP - return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */ -#endif - - if (!MACH_IS_AMIGA){ - return -ENODEV; - } - - printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */ - - z = NULL; - nr_a2232 = 0; - while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){ - if ( (z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) && - (z->id != ZORRO_PROD_CBM_A2232) ){ - continue; // The board found was no A2232 - } - if (!zorro_request_device(z,"A2232 driver")) - continue; - - printk("Commodore A2232 found (#%d).\n",nr_a2232); - - zd_a2232[nr_a2232] = z; - - boardaddr = ZTWO_VADDR( z->resource.start ); - printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start))); - - mem = (volatile struct a2232memory *) boardaddr; - - (void) mem->Enable6502Reset; /* copy the code across to the board */ - to = (u_char *)mem; from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2; - start = *(short *)from; - from += sizeof(start); - to += start; - while(bcount--) *to++ = *from++; - printk("65EC02 software uploaded to the A2232 memory.\n"); - - mem->Common.Crystal = A2232_UNKNOWN; /* use automatic speed check */ - - /* start 6502 running */ - (void) mem->ResetBoard; - printk("A2232's 65EC02 CPU up and running.\n"); - - /* wait until speed detector has finished */ - for (bcount = 0; bcount < 2000; bcount++) { - udelay(1000); - if (mem->Common.Crystal) - break; - } - printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: ")); - switch (mem->Common.Crystal){ - case A2232_UNKNOWN: - printk("Unknown crystal.\n"); - break; - case A2232_NORMAL: - printk ("Normal crystal.\n"); - break; - case A2232_TURBO: - printk ("Turbo crystal.\n"); - break; - default: - printk ("0x%x. Huh?\n",mem->Common.Crystal); - } - - nr_a2232++; - - } - - printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */ - - a2232_init_portstructs(); - - /* - a2232_init_drivers also registers the drivers. Must be here because all boards - have to be detected first. - */ - if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx? - - error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, - "A2232 serial VBL", a2232_driver_ID); - if (error) { - for (i = 0; i < nr_a2232; i++) - zorro_release_device(zd_a2232[i]); - tty_unregister_driver(a2232_driver); - put_tty_driver(a2232_driver); - } - return error; -} - -static void __exit a2232board_exit(void) -{ - int i; - - for (i = 0; i < nr_a2232; i++) { - zorro_release_device(zd_a2232[i]); - } - - tty_unregister_driver(a2232_driver); - put_tty_driver(a2232_driver); - free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID); -} - -module_init(a2232board_init); -module_exit(a2232board_exit); - -MODULE_AUTHOR("Enver Haase"); -MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver"); -MODULE_LICENSE("GPL"); |