diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/ahci_brcm.c | 133 | ||||
| -rw-r--r-- | drivers/ata/libahci_platform.c | 6 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 24 | ||||
| -rw-r--r-- | drivers/ata/sata_fsl.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_nv.c | 2 |
6 files changed, 125 insertions, 44 deletions
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c index f41744b9b38a..66a570d0da83 100644 --- a/drivers/ata/ahci_brcm.c +++ b/drivers/ata/ahci_brcm.c @@ -76,8 +76,7 @@ enum brcm_ahci_version { }; enum brcm_ahci_quirks { - BRCM_AHCI_QUIRK_NO_NCQ = BIT(0), - BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1), + BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(0), }; struct brcm_ahci_priv { @@ -213,19 +212,12 @@ static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv) brcm_sata_phy_disable(priv, i); } -static u32 brcm_ahci_get_portmask(struct platform_device *pdev, +static u32 brcm_ahci_get_portmask(struct ahci_host_priv *hpriv, struct brcm_ahci_priv *priv) { - void __iomem *ahci; - struct resource *res; u32 impl; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci"); - ahci = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(ahci)) - return 0; - - impl = readl(ahci + HOST_PORTS_IMPL); + impl = readl(hpriv->mmio + HOST_PORTS_IMPL); if (fls(impl) > SATA_TOP_MAX_PHYS) dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n", @@ -233,9 +225,6 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev, else if (!impl) dev_info(priv->dev, "no ports found\n"); - devm_iounmap(&pdev->dev, ahci); - devm_release_mem_region(&pdev->dev, res->start, resource_size(res)); - return impl; } @@ -285,6 +274,13 @@ static unsigned int brcm_ahci_read_id(struct ata_device *dev, /* Perform the SATA PHY reset sequence */ brcm_sata_phy_disable(priv, ap->port_no); + /* Reset the SATA clock */ + ahci_platform_disable_clks(hpriv); + msleep(10); + + ahci_platform_enable_clks(hpriv); + msleep(10); + /* Bring the PHY back on */ brcm_sata_phy_enable(priv, ap->port_no); @@ -347,11 +343,10 @@ static int brcm_ahci_suspend(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; struct brcm_ahci_priv *priv = hpriv->plat_data; - int ret; - ret = ahci_platform_suspend(dev); brcm_sata_phys_disable(priv); - return ret; + + return ahci_platform_suspend(dev); } static int brcm_ahci_resume(struct device *dev) @@ -359,11 +354,44 @@ static int brcm_ahci_resume(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; struct brcm_ahci_priv *priv = hpriv->plat_data; + int ret; + + /* Make sure clocks are turned on before re-configuration */ + ret = ahci_platform_enable_clks(hpriv); + if (ret) + return ret; brcm_sata_init(priv); brcm_sata_phys_enable(priv); brcm_sata_alpm_init(hpriv); - return ahci_platform_resume(dev); + + /* Since we had to enable clocks earlier on, we cannot use + * ahci_platform_resume() as-is since a second call to + * ahci_platform_enable_resources() would bump up the resources + * (regulators, clocks, PHYs) count artificially so we copy the part + * after ahci_platform_enable_resources(). + */ + ret = ahci_platform_enable_phys(hpriv); + if (ret) + goto out_disable_phys; + + ret = ahci_platform_resume_host(dev); + if (ret) + goto out_disable_platform_phys; + + /* We resumed so update PM runtime state */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; + +out_disable_platform_phys: + ahci_platform_disable_phys(hpriv); +out_disable_phys: + brcm_sata_phys_disable(priv); + ahci_platform_disable_clks(hpriv); + return ret; } #endif @@ -410,44 +438,71 @@ static int brcm_ahci_probe(struct platform_device *pdev) if (!IS_ERR_OR_NULL(priv->rcdev)) reset_control_deassert(priv->rcdev); - if ((priv->version == BRCM_SATA_BCM7425) || - (priv->version == BRCM_SATA_NSP)) { - priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ; + hpriv = ahci_platform_get_resources(pdev, 0); + if (IS_ERR(hpriv)) { + ret = PTR_ERR(hpriv); + goto out_reset; + } + + hpriv->plat_data = priv; + hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP | AHCI_HFLAG_NO_WRITE_TO_RO; + + switch (priv->version) { + case BRCM_SATA_BCM7425: + hpriv->flags |= AHCI_HFLAG_DELAY_ENGINE; + /* fall through */ + case BRCM_SATA_NSP: + hpriv->flags |= AHCI_HFLAG_NO_NCQ; priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE; + break; + default: + break; } + ret = ahci_platform_enable_clks(hpriv); + if (ret) + goto out_reset; + + /* Must be first so as to configure endianness including that + * of the standard AHCI register space. + */ brcm_sata_init(priv); - priv->port_mask = brcm_ahci_get_portmask(pdev, priv); - if (!priv->port_mask) - return -ENODEV; + /* Initializes priv->port_mask which is used below */ + priv->port_mask = brcm_ahci_get_portmask(hpriv, priv); + if (!priv->port_mask) { + ret = -ENODEV; + goto out_disable_clks; + } + /* Must be done before ahci_platform_enable_phys() */ brcm_sata_phys_enable(priv); - hpriv = ahci_platform_get_resources(pdev, 0); - if (IS_ERR(hpriv)) - return PTR_ERR(hpriv); - hpriv->plat_data = priv; - hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP; - brcm_sata_alpm_init(hpriv); - ret = ahci_platform_enable_resources(hpriv); + ret = ahci_platform_enable_phys(hpriv); if (ret) - return ret; - - if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ) - hpriv->flags |= AHCI_HFLAG_NO_NCQ; - hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO; + goto out_disable_phys; ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info, &ahci_platform_sht); if (ret) - return ret; + goto out_disable_platform_phys; dev_info(dev, "Broadcom AHCI SATA3 registered\n"); return 0; + +out_disable_platform_phys: + ahci_platform_disable_phys(hpriv); +out_disable_phys: + brcm_sata_phys_disable(priv); +out_disable_clks: + ahci_platform_disable_clks(hpriv); +out_reset: + if (!IS_ERR_OR_NULL(priv->rcdev)) + reset_control_assert(priv->rcdev); + return ret; } static int brcm_ahci_remove(struct platform_device *pdev) @@ -457,12 +512,12 @@ static int brcm_ahci_remove(struct platform_device *pdev) struct brcm_ahci_priv *priv = hpriv->plat_data; int ret; + brcm_sata_phys_disable(priv); + ret = ata_platform_remove_one(pdev); if (ret) return ret; - brcm_sata_phys_disable(priv); - return 0; } diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 8befce036af8..129556fcf6be 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -43,7 +43,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_ops); * RETURNS: * 0 on success otherwise a negative error code */ -static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv) +int ahci_platform_enable_phys(struct ahci_host_priv *hpriv) { int rc, i; @@ -74,6 +74,7 @@ disable_phys: } return rc; } +EXPORT_SYMBOL_GPL(ahci_platform_enable_phys); /** * ahci_platform_disable_phys - Disable PHYs @@ -81,7 +82,7 @@ disable_phys: * * This function disables all PHYs found in hpriv->phys. */ -static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) +void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) { int i; @@ -90,6 +91,7 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) phy_exit(hpriv->phys[i]); } } +EXPORT_SYMBOL_GPL(ahci_platform_disable_phys); /** * ahci_platform_enable_clks - Enable platform clocks diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e9017c570bc5..6f4ab5c5b52d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5329,6 +5329,30 @@ void ata_qc_complete(struct ata_queued_cmd *qc) } /** + * ata_qc_get_active - get bitmask of active qcs + * @ap: port in question + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Bitmask of active qcs + */ +u64 ata_qc_get_active(struct ata_port *ap) +{ + u64 qc_active = ap->qc_active; + + /* ATA_TAG_INTERNAL is sent to hw as tag 0 */ + if (qc_active & (1ULL << ATA_TAG_INTERNAL)) { + qc_active |= (1 << 0); + qc_active &= ~(1ULL << ATA_TAG_INTERNAL); + } + + return qc_active; +} +EXPORT_SYMBOL_GPL(ata_qc_get_active); + +/** * ata_qc_complete_multiple - Complete multiple qcs successfully * @ap: port in question * @qc_active: new qc_active mask diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 9239615d8a04..d55ee244d693 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1280,7 +1280,7 @@ static void sata_fsl_host_intr(struct ata_port *ap) i, ioread32(hcr_base + CC), ioread32(hcr_base + CA)); } - ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask); return; } else if ((ap->qc_active & (1ULL << ATA_TAG_INTERNAL))) { diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 277f11909fc1..d7228f8e9297 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2829,7 +2829,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp } if (work_done) { - ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask); /* Update the software queue position index in hardware */ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index f3e62f5528bd..eb9dc14e5147 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -984,7 +984,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) check_commands = 0; check_commands &= ~(1 << pos); } - ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask); } } |