summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/mips/Kconfig4
-rw-r--r--arch/mips/au1000/common/pci.c8
-rw-r--r--arch/mips/kernel/head.S3
-rw-r--r--arch/mips/kernel/time.c4
-rw-r--r--arch/mips/pci/ops-au1000.c53
-rw-r--r--arch/mips/pci/ops-mace.c7
-rw-r--r--arch/mips/pci/pci-ip32.c4
-rw-r--r--arch/mips/sgi-ip32/ip32-irq.c1
-rw-r--r--arch/mips/sgi-ip32/ip32-platform.c20
9 files changed, 57 insertions, 47 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c6fc405a6c8e..291d368ffd28 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -992,8 +992,6 @@ config BOOT_ELF64
menu "CPU selection"
-source "kernel/time/Kconfig"
-
choice
prompt "CPU type"
default CPU_R4X00
@@ -1768,6 +1766,8 @@ config NR_CPUS
performance should round up your number of processors to the next
power of two.
+source "kernel/time/Kconfig"
+
#
# Timer Interrupt Frequency Configuration
#
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 6fa70a36a250..ce771487567d 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -1,8 +1,8 @@
/*
* BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 pci support.
+ * Alchemy/AMD Au1x00 PCI support.
*
- * Copyright 2001,2002,2003 MontaVista Software Inc.
+ * Copyright 2001-2003, 2007 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
@@ -66,6 +66,8 @@ static unsigned long virt_io_addr;
static int __init au1x_pci_setup(void)
{
+ extern void au1x_pci_cfg_init(void);
+
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
@@ -94,6 +96,8 @@ static int __init au1x_pci_setup(void)
set_io_port_base(virt_io_addr);
#endif
+ au1x_pci_cfg_init();
+
register_pci_controller(&au1x_controller);
return 0;
}
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 236768731063..50be56c9e9ef 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -136,7 +136,8 @@ EXPORT(_stext)
* kernel load address. This is needed because this platform does
* not have a ELF loader yet.
*/
- __INIT
+FEXPORT(__kernel_entry)
+ j kernel_entry
#endif
__INIT_REFOK
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 1ecfbb7eba6c..2995be1ab3ca 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -147,9 +147,9 @@ static __init int cpu_has_mfc0_count_bug(void)
return 1;
/*
- * I don't have erratas for newer R4400 so be paranoid.
+ * we assume newer revisions are ok
*/
- return 1;
+ return 0;
}
return 0;
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 6b29904acf45..1314bd58f036 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -1,8 +1,8 @@
/*
* BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 pci support.
+ * Alchemy/AMD Au1x00 PCI support.
*
- * Copyright 2001,2002,2003 MontaVista Software Inc.
+ * Copyright 2001-2003, 2007 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
@@ -69,10 +69,27 @@ void mod_wired_entry(int entry, unsigned long entrylo0,
write_c0_pagemask(old_pagemask);
}
-struct vm_struct *pci_cfg_vm;
+static struct vm_struct *pci_cfg_vm;
static int pci_cfg_wired_entry;
-static int first_cfg = 1;
-unsigned long last_entryLo0, last_entryLo1;
+static unsigned long last_entryLo0, last_entryLo1;
+
+/*
+ * We can't ioremap the entire pci config space because it's too large.
+ * Nor can we call ioremap dynamically because some device drivers use
+ * the PCI config routines from within interrupt handlers and that
+ * becomes a problem in get_vm_area(). We use one wired TLB to handle
+ * all config accesses for all busses.
+ */
+void __init au1x_pci_cfg_init(void)
+{
+ /* Reserve a wired entry for PCI config accesses */
+ pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
+ if (!pci_cfg_vm)
+ panic(KERN_ERR "PCI unable to get vm area\n");
+ pci_cfg_wired_entry = read_c0_wired();
+ add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
+ last_entryLo0 = last_entryLo1 = 0xffffffff;
+}
static int config_access(unsigned char access_type, struct pci_bus *bus,
unsigned int dev_fn, unsigned char where,
@@ -97,27 +114,6 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
Au1500_PCI_STATCMD);
au_sync_udelay(1);
- /*
- * We can't ioremap the entire pci config space because it's
- * too large. Nor can we call ioremap dynamically because some
- * device drivers use the pci config routines from within
- * interrupt handlers and that becomes a problem in get_vm_area().
- * We use one wired tlb to handle all config accesses for all
- * busses. To improve performance, if the current device
- * is the same as the last device accessed, we don't touch the
- * tlb.
- */
- if (first_cfg) {
- /* reserve a wired entry for pci config accesses */
- first_cfg = 0;
- pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
- if (!pci_cfg_vm)
- panic(KERN_ERR "PCI unable to get vm area\n");
- pci_cfg_wired_entry = read_c0_wired();
- add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
- last_entryLo0 = last_entryLo1 = 0xffffffff;
- }
-
/* Allow board vendors to implement their own off-chip idsel.
* If it doesn't succeed, may as well bail out at this point.
*/
@@ -144,9 +140,12 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
/* page boundary */
cfg_base = cfg_base & PAGE_MASK;
+ /*
+ * To improve performance, if the current device is the same as
+ * the last device accessed, we don't touch the TLB.
+ */
entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
-
if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
(unsigned long)pci_cfg_vm->addr, PM_4K);
diff --git a/arch/mips/pci/ops-mace.c b/arch/mips/pci/ops-mace.c
index fe5451449304..e95881897ec9 100644
--- a/arch/mips/pci/ops-mace.c
+++ b/arch/mips/pci/ops-mace.c
@@ -42,6 +42,10 @@ static int
mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 *val)
{
+ u32 control = mace->pci.control;
+
+ /* disable master aborts interrupts during config read */
+ mace->pci.control = control & ~MACEPCI_CONTROL_MAR_INT;
mace->pci.config_addr = mkaddr(bus, devfn, reg);
switch (size) {
case 1:
@@ -54,6 +58,9 @@ mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
*val = mace->pci.config_data.l;
break;
}
+ /* ack possible master abort */
+ mace->pci.error &= ~MACEPCI_ERROR_MASTER_ABORT;
+ mace->pci.control = control;
DPRINTK("read%d: reg=%08x,val=%02x\n", size * 8, reg, *val);
diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c
index 618ea7dbc474..532b561b4442 100644
--- a/arch/mips/pci/pci-ip32.c
+++ b/arch/mips/pci/pci-ip32.c
@@ -119,6 +119,7 @@ static struct pci_controller mace_pci_controller = {
.iommu = 0,
.mem_offset = MACE_PCI_MEM_OFFSET,
.io_offset = 0,
+ .io_map_base = CKSEG1ADDR(MACEPCI_LOW_IO),
};
static int __init mace_init(void)
@@ -135,7 +136,8 @@ static int __init mace_init(void)
BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0,
"MACE PCI error", NULL));
- iomem_resource = mace_pci_mem_resource;
+ /* extend memory resources */
+ iomem_resource.end = mace_pci_mem_resource.end;
ioport_resource = mace_pci_io_resource;
register_pci_controller(&mace_pci_controller);
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index cab7cc22ab67..b0ea0e43ba48 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -426,7 +426,6 @@ static void ip32_irq0(void)
crime_int = crime->istat & crime_mask;
irq = MACE_VID_IN1_IRQ + __ffs(crime_int);
- crime_int = 1 << irq;
if (crime_int & CRIME_MACEISA_INT_MASK) {
unsigned long mace_int = mace->perif.ctrl.istat;
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 77febd68fcd4..89a71f49b692 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -13,21 +13,22 @@
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
-/*
- * .iobase isn't a constant (in the sense of C) so we fill it in at runtime.
- */
-#define MACE_PORT(int) \
+#define MACEISA_SERIAL1_OFFS offsetof(struct sgi_mace, isa.serial1)
+#define MACEISA_SERIAL2_OFFS offsetof(struct sgi_mace, isa.serial2)
+
+#define MACE_PORT(offset,_irq) \
{ \
- .irq = int, \
+ .mapbase = MACE_BASE + offset, \
+ .irq = _irq, \
.uartclk = 1843200, \
.iotype = UPIO_MEM, \
- .flags = UPF_SKIP_TEST, \
+ .flags = UPF_SKIP_TEST|UPF_IOREMAP, \
.regshift = 8, \
}
static struct plat_serial8250_port uart8250_data[] = {
- MACE_PORT(MACEISA_SERIAL1_IRQ),
- MACE_PORT(MACEISA_SERIAL2_IRQ),
+ MACE_PORT(MACEISA_SERIAL1_OFFS, MACEISA_SERIAL1_IRQ),
+ MACE_PORT(MACEISA_SERIAL2_OFFS, MACEISA_SERIAL2_IRQ),
{ },
};
@@ -41,9 +42,6 @@ static struct platform_device uart8250_device = {
static int __init uart8250_init(void)
{
- uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
- uart8250_data[1].membase = (void __iomem *) &mace->isa.serial2;
-
return platform_device_register(&uart8250_device);
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 14:46:33 +0000