diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/powerpc/boot/dts/lite5200.dts | 28 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/lite5200b.dts | 5 | ||||
| -rw-r--r-- | arch/powerpc/platforms/52xx/mpc52xx_pm.c | 11 |
3 files changed, 41 insertions, 3 deletions
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 82ff2b13bc37..179a1785d645 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -134,12 +134,16 @@ compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; }; gpio@c00 { compatible = "fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { @@ -230,8 +234,8 @@ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@1 { - reg = <1>; + phy0: ethernet-phy@0 { + reg = <0>; }; }; @@ -255,7 +259,13 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; }; + sram@8000 { compatible = "fsl,mpc5200-sram"; reg = <0x8000 0x4000>; @@ -281,4 +291,18 @@ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff000000 0x01000000>; + + flash@0,0 { + compatible = "amd,am29lv652d", "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <1>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index e45a63be3a86..59702ace900f 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -259,6 +259,11 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; }; sram@8000 { diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c index a55b0b6813ed..76722532bd95 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c @@ -64,10 +64,19 @@ int mpc52xx_pm_prepare(void) { .type = "builtin", .compatible = "mpc5200", }, /* efika */ {} }; + struct resource res; /* map the whole register space */ np = of_find_matching_node(NULL, immr_ids); - mbar = of_iomap(np, 0); + + if (of_address_to_resource(np, 0, &res)) { + pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n"); + of_node_put(np); + return -ENOSYS; + } + + mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */ + of_node_put(np); if (!mbar) { pr_err("mpc52xx_pm_prepare(): could not map registers\n"); |