diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/mips/Kconfig | 33 | ||||
-rw-r--r-- | arch/mips/au1000/Kconfig | 1 | ||||
-rw-r--r-- | arch/mips/kernel/Makefile | 2 | ||||
-rw-r--r-- | arch/mips/kernel/cevt-r4k.c | 14 | ||||
-rw-r--r-- | arch/mips/kernel/csrc-r4k.c | 29 | ||||
-rw-r--r-- | arch/mips/kernel/setup.c | 31 | ||||
-rw-r--r-- | arch/mips/kernel/smp-up.c | 67 | ||||
-rw-r--r-- | arch/mips/kernel/time.c | 112 | ||||
-rw-r--r-- | arch/mips/kernel/vpe.c | 4 | ||||
-rw-r--r-- | arch/mips/math-emu/ieee754.c | 2 | ||||
-rw-r--r-- | arch/mips/math-emu/ieee754dp.c | 2 | ||||
-rw-r--r-- | arch/mips/math-emu/ieee754sp.c | 2 | ||||
-rw-r--r-- | arch/mips/mipssim/sim_time.c | 6 | ||||
-rw-r--r-- | arch/mips/mm/dma-default.c | 37 | ||||
-rw-r--r-- | arch/mips/mm/init.c | 43 | ||||
-rw-r--r-- | arch/mips/pmc-sierra/Kconfig | 2 | ||||
-rw-r--r-- | arch/mips/sgi-ip22/ip22-eisa.c | 134 | ||||
-rw-r--r-- | arch/mips/sgi-ip22/ip22-nvram.c | 40 | ||||
-rw-r--r-- | arch/mips/sgi-ip32/ip32-irq.c | 24 | ||||
-rw-r--r-- | arch/mips/vr41xx/Kconfig | 6 | ||||
-rw-r--r-- | arch/x86/Makefile | 5 |
21 files changed, 303 insertions, 293 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2f2ce0c28bc0..455bd1f560aa 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -22,6 +22,7 @@ config MACH_ALCHEMY config BASLER_EXCITE bool "Basler eXcite smart camera" select CEVT_R4K + select CSRC_R4K select DMA_COHERENT select HW_HAS_PCI select IRQ_CPU @@ -49,6 +50,7 @@ config BASLER_EXCITE_PROTOTYPE config BCM47XX bool "BCM47XX based boards" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -66,6 +68,7 @@ config BCM47XX config MIPS_COBALT bool "Cobalt Server" select CEVT_R4K + select CSRC_R4K select CEVT_GT641XX select DMA_NONCOHERENT select HW_HAS_PCI @@ -85,6 +88,7 @@ config MACH_DECSTATION bool "DECstations" select BOOT_ELF32 select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select NO_IOPORT select IRQ_CPU @@ -117,6 +121,7 @@ config MACH_JAZZ select ARC32 select ARCH_MAY_HAVE_PC_FDC select CEVT_R4K + select CSRC_R4K select GENERIC_ISA_DMA select IRQ_CPU select I8253 @@ -137,6 +142,7 @@ config MACH_JAZZ config LASAT bool "LASAT Networks platforms" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI @@ -154,6 +160,7 @@ config LEMOTE_FULONG bool "Lemote Fulong mini-PC" select ARCH_SPARSEMEM_ENABLE select CEVT_R4K + select CSRC_R4K select SYS_HAS_CPU_LOONGSON2 select DMA_NONCOHERENT select BOOT_ELF32 @@ -179,6 +186,7 @@ config MIPS_ATLAS bool "MIPS Atlas board" select BOOT_ELF32 select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK select IRQ_CPU @@ -210,6 +218,7 @@ config MIPS_MALTA select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select GENERIC_ISA_DMA select IRQ_CPU @@ -241,6 +250,7 @@ config MIPS_MALTA config MIPS_SEAD bool "MIPS SEAD board" select CEVT_R4K + select CSRC_R4K select IRQ_CPU select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK @@ -260,6 +270,7 @@ config MIPS_SEAD config MIPS_SIM bool 'MIPS simulator (MIPSsim)' select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK select IRQ_CPU @@ -278,6 +289,7 @@ config MIPS_SIM config MARKEINS bool "NEC EMMA2RH Mark-eins" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -293,6 +305,7 @@ config MARKEINS config MACH_VR41XX bool "NEC VR4100 series based machines" select CEVT_R4K + select CSRC_R4K select SYS_HAS_CPU_VR41XX select GENERIC_HARDIRQS_NO__DO_IRQ @@ -330,6 +343,7 @@ config PMC_MSP config PMC_YOSEMITE bool "PMC-Sierra Yosemite eval board" select CEVT_R4K + select CSRC_R4K select DMA_COHERENT select HW_HAS_PCI select IRQ_CPU @@ -351,6 +365,7 @@ config PMC_YOSEMITE config QEMU bool "Qemu" select CEVT_R4K + select CSRC_R4K select DMA_COHERENT select GENERIC_ISA_DMA select HAVE_STD_PC_SERIAL_PORT @@ -382,9 +397,11 @@ config SGI_IP22 select ARC32 select BOOT_ELF32 select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select HW_HAS_EISA select I8253 + select I8259 select IP22_CPU_SCACHE select IRQ_CPU select GENERIC_ISA_DMA_SUPPORT_BROKEN @@ -427,6 +444,7 @@ config SGI_IP32 select ARC32 select BOOT_ELF32 select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -498,6 +516,7 @@ config SIBYTE_SWARM select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN + select ZONE_DMA32 if 64BIT config SIBYTE_LITTLESUR bool "Sibyte BCM91250C2-LittleSur" @@ -548,6 +567,7 @@ config SIBYTE_BIGSUR select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN + select ZONE_DMA32 if 64BIT config SNI_RM bool "SNI RM200/300/400" @@ -556,6 +576,7 @@ config SNI_RM select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select GENERIC_ISA_DMA select HW_HAS_EISA @@ -599,6 +620,7 @@ config TOSHIBA_JMR3927 config TOSHIBA_RBTX4927 bool "Toshiba RBTX49[23]7 board" select CEVT_R4K + select CSRC_R4K select CEVT_TXX9 select DMA_NONCOHERENT select HAS_TXX9_SERIAL @@ -621,6 +643,7 @@ config TOSHIBA_RBTX4927 config TOSHIBA_RBTX4938 bool "Toshiba RBTX4938 board" select CEVT_R4K + select CSRC_R4K select CEVT_TXX9 select DMA_NONCOHERENT select HAS_TXX9_SERIAL @@ -642,6 +665,7 @@ config TOSHIBA_RBTX4938 config WR_PPMC bool "Wind River PPMC board" select CEVT_R4K + select CSRC_R4K select IRQ_CPU select BOOT_ELF32 select DMA_NONCOHERENT @@ -752,6 +776,9 @@ config CEVT_TXX9 config CSRC_BCM1480 bool +config CSRC_R4K + bool + config CSRC_SB1250 bool @@ -1640,6 +1667,9 @@ config ARCH_DISCONTIGMEM_ENABLE or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +config ARCH_POPULATES_NODE_MAP + def_bool y + config ARCH_SPARSEMEM_ENABLE bool select SPARSEMEM_STATIC @@ -1945,6 +1975,9 @@ config I8253 config PCSPEAKER bool +config ZONE_DMA32 + bool + source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig index b36cec58a9a8..05d1354aad3a 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/au1000/Kconfig @@ -138,6 +138,7 @@ config SOC_AU1X00 bool select 64BIT_PHYS_ADDR select CEVT_R4K + select CSRC_R4K select IRQ_CPU select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index b551535b7e48..ffa08362de17 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o +obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ @@ -43,6 +44,7 @@ obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_SMP_UP) += smp-up.o obj-$(CONFIG_MIPS_MT) += mips-mt.o obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index bab935a3d74b..24a2d907aa0d 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -219,7 +219,7 @@ static int c0_compare_int_usable(void) return 1; } -void __cpuinit mips_clockevent_init(void) +int __cpuinit mips_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; unsigned int cpu = smp_processor_id(); @@ -227,7 +227,7 @@ void __cpuinit mips_clockevent_init(void) unsigned int irq; if (!cpu_has_counter || !mips_hpt_frequency) - return; + return -ENXIO; #ifdef CONFIG_MIPS_MT_SMTC setup_smtc_dummy_clockevent_device(); @@ -237,11 +237,11 @@ void __cpuinit mips_clockevent_init(void) * device. */ if (cpu) - return; + return 0; #endif if (!c0_compare_int_usable()) - return; + return -ENXIO; /* * With vectored interrupts things are getting platform specific. @@ -276,8 +276,8 @@ void __cpuinit mips_clockevent_init(void) clockevents_register_device(cd); - if (!cp0_timer_irq_installed) - return; + if (cp0_timer_irq_installed) + return 0; cp0_timer_irq_installed = 1; @@ -287,4 +287,6 @@ void __cpuinit mips_clockevent_init(void) #else setup_irq(irq, &c0_compare_irqaction); #endif + + return 0; } diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c new file mode 100644 index 000000000000..74c5c62365a8 --- /dev/null +++ b/arch/mips/kernel/csrc-r4k.c @@ -0,0 +1,29 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ + +static cycle_t c0_hpt_read(void) +{ + return read_c0_count(); +} + +static struct clocksource clocksource_mips = { + .name = "MIPS", + .read = c0_hpt_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init init_mips_clocksource(void) +{ + /* Calclate a somewhat reasonable rating value */ + clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; + + clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); + + clocksource_register(&clocksource_mips); +} diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index a06a27d6cfcd..7f6ddcb5d485 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -269,7 +269,7 @@ static void __init bootmem_init(void) static void __init bootmem_init(void) { - unsigned long reserved_end; + unsigned long init_begin, reserved_end; unsigned long mapstart = ~0UL; unsigned long bootmap_size; int i; @@ -342,6 +342,35 @@ static void __init bootmem_init(void) */ bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart, min_low_pfn, max_low_pfn); + + + init_begin = PFN_UP(__pa_symbol(&__init_begin)); + for (i = 0; i < boot_mem_map.nr_map; i++) { + unsigned long start, end; + + start = PFN_UP(boot_mem_map.map[i].addr); + end = PFN_DOWN(boot_mem_map.map[i].addr + + boot_mem_map.map[i].size); + + if (start <= init_begin) + start = init_begin; + if (start >= end) + continue; + +#ifndef CONFIG_HIGHMEM + if (end > max_low_pfn) + end = max_low_pfn; + + /* + * ... finally, is the area going away? + */ + if (end <= start) + continue; +#endif + + add_active_range(0, start, end); + } + /* * Register fully available low RAM pages with the bootmem allocator. */ diff --git a/arch/mips/kernel/smp-up.c b/arch/mips/kernel/smp-up.c new file mode 100644 index 000000000000..ead6c30eeb14 --- /dev/null +++ b/arch/mips/kernel/smp-up.c @@ -0,0 +1,67 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006, 07 by Ralf Baechle (ralf@linux-mips.org) + * + * Symmetric Uniprocessor (TM) Support + */ +#include <linux/kernel.h> +#include <linux/sched.h> + +/* + * Send inter-processor interrupt + */ +void up_send_ipi_single(int cpu, unsigned int action) +{ + panic(KERN_ERR "%s called", __func__); +} + +static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + panic(KERN_ERR "%s called", __func__); +} + +/* + * After we've done initial boot, this function is called to allow the + * board code to clean up state, if needed + */ +void __cpuinit up_init_secondary(void) +{ +} + +void __cpuinit up_smp_finish(void) +{ +} + +/* Hook for after all CPUs are online */ +void up_cpus_done(void) +{ +} + +/* + * Firmware CPU startup hook + */ +void __cpuinit up_boot_secondary(int cpu, struct task_struct *idle) +{ +} + +void __init up_smp_setup(void) +{ +} + +void __init up_prepare_cpus(unsigned int max_cpus) +{ +} + +struct plat_smp_ops up_smp_ops = { + .send_ipi_single = up_send_ipi_single, + .send_ipi_mask = up_send_ipi_mask, + .init_secondary = up_init_secondary, + .smp_finish = up_smp_finish, + .cpus_done = up_cpus_done, + .boot_secondary = up_boot_secondary, + .smp_setup = up_smp_setup, + .prepare_cpus = up_prepare_cpus, +}; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 3284b9b4ecac..52075426c373 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -50,14 +50,6 @@ int update_persistent_clock(struct timespec now) return rtc_mips_set_mmss(now.tv_sec); } -/* - * High precision timer functions for a R4k-compatible timer. - */ -static cycle_t c0_hpt_read(void) -{ - return read_c0_count(); -} - int (*mips_timer_state)(void); int null_perf_irq(void) @@ -84,55 +76,6 @@ EXPORT_SYMBOL(perf_irq); unsigned int mips_hpt_frequency; -static struct clocksource clocksource_mips = { - .name = "MIPS", - .read = c0_hpt_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static unsigned int __init calibrate_hpt(void) -{ - cycle_t frequency, hpt_start, hpt_end, hpt_count, hz; - - const int loops = HZ / 10; - int log_2_loops = 0; - int i; - - /* - * We want to calibrate for 0.1s, but to avoid a 64-bit - * division we round the number of loops up to the nearest - * power of 2. - */ - while (loops > 1 << log_2_loops) - log_2_loops++; - i = 1 << log_2_loops; - - /* - * Wait for a rising edge of the timer interrupt. - */ - while (mips_timer_state()); - while (!mips_timer_state()); - - /* - * Now see how many high precision timer ticks happen - * during the calculated number of periods between timer - * interrupts. - */ - hpt_start = clocksource_mips.read(); - do { - while (mips_timer_state()); - while (!mips_timer_state()); - } while (--i); - hpt_end = clocksource_mips.read(); - - hpt_count = (hpt_end - hpt_start) & clocksource_mips.mask; - hz = HZ; - frequency = hpt_count * hz; - - return frequency >> log_2_loops; -} - void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) { u64 temp; @@ -166,16 +109,6 @@ void __cpuinit clockevent_set_clock(struct clock_event_device *cd, cd->mult = (u32) temp; } -static void __init init_mips_clocksource(void) -{ - /* Calclate a somewhat reasonable rating value */ - clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; - - clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); - - clocksource_register(&clocksource_mips); -} - void __init __weak plat_time_init(void) { } @@ -194,21 +127,42 @@ void __init plat_timer_setup(void) BUG(); } +static __init int cpu_has_mfc0_count_bug(void) +{ + switch (current_cpu_type()) { + case CPU_R4000PC: + case CPU_R4000SC: + case CPU_R4000MC: + /* + * V3.0 is documented as suffering from the mfc0 from count bug. + * Afaik this is the last version of the R4000. Later versions + * were marketed as R4400. + */ + return 1; + + case CPU_R4400PC: + case CPU_R4400SC: + case CPU_R4400MC: + /* + * The published errata for the R4400 upto 3.0 say the CPU + * has the mfc0 from count bug. + */ + if ((current_cpu_data.processor_id & 0xff) <= 0x30) + return 1; + + /* + * I don't have erratas for newer R4400 so be paranoid. + */ + return 1; + } + + return 0; +} + void __init time_init(void) { plat_time_init(); - if (cpu_has_counter && (mips_hpt_frequency || mips_timer_state)) { - /* We know counter frequency. Or we can get it. */ - if (!mips_hpt_frequency) - mips_hpt_frequency = calibrate_hpt(); - - /* Report the high precision timer rate for a reference. */ - printk("Using %u.%03u MHz high precision timer.\n", - ((mips_hpt_frequency + 500) / 1000) / 1000, - ((mips_hpt_frequency + 500) / 1000) % 1000); + if (mips_clockevent_init() || !cpu_has_mfc0_count_bug()) init_mips_clocksource(); - } - - mips_clockevent_init(); } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 38bd33fa2a23..c06eb812a95e 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -470,7 +470,7 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, */ if (v != l->value) { printk(KERN_DEBUG "VPE loader: " - "apply_r_mips_lo16/hi16: " + "apply_r_mips_lo16/hi16: \t" "inconsistent value information\n"); return -ENOEXEC; } @@ -629,7 +629,7 @@ static void simplify_symbols(Elf_Shdr * sechdrs, break; case SHN_MIPS_SCOMMON: - printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON" + printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON " "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name, sym[i].st_shndx); // .sbss section diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c index 946aee331788..cb1b6822711a 100644 --- a/arch/mips/math-emu/ieee754.c +++ b/arch/mips/math-emu/ieee754.c @@ -108,6 +108,7 @@ int ieee754si_xcpt(int r, const char *op, ...) ax.rv.si = r; va_start(ax.ap, op); ieee754_xcpt(&ax); + va_end(ax.ap); return ax.rv.si; } @@ -122,5 +123,6 @@ s64 ieee754di_xcpt(s64 r, const char *op, ...) ax.rv.di = r; va_start(ax.ap, op); ieee754_xcpt(&ax); + va_end(ax.ap); return ax.rv.di; } diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c index 3e214aac4b12..6d2d89f32472 100644 --- a/arch/mips/math-emu/ieee754dp.c +++ b/arch/mips/math-emu/ieee754dp.c @@ -57,6 +57,7 @@ ieee754dp ieee754dp_xcpt(ieee754dp r, const char *op, ...) ax.rv.dp = r; va_start(ax.ap, op); ieee754_xcpt(&ax); + va_end(ax.ap); return ax.rv.dp; } @@ -83,6 +84,7 @@ ieee754dp ieee754dp_nanxcpt(ieee754dp r, const char *op, ...) ax.rv.dp = r; va_start(ax.ap, op); ieee754_xcpt(&ax); + va_end(ax.ap); return ax.rv.dp; } diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c index adda851cd04f..463534045ab6 100644 --- a/arch/mips/math-emu/ieee754sp.c +++ b/arch/mips/math-emu/ieee754sp.c @@ -58,6 +58,7 @@ ieee754sp ieee754sp_xcpt(ieee754sp r, const char *op, ...) ax.rv.sp = r; va_start(ax.ap, op); ieee754_xcpt(&ax); + va_end(ax.ap); return ax.rv.sp; } @@ -84,6 +85,7 @@ ieee754sp ieee754sp_nanxcpt(ieee754sp r, const char *op, ...) ax.rv.sp = r; va_start(ax.ap, op); ieee754_xcpt(&ax); + va_end(ax.ap); return ax.rv.sp; } diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c index bfaafa38846f..e39bbe989da3 100644 --- a/arch/mips/mipssim/sim_time.c +++ b/arch/mips/mipssim/sim_time.c @@ -101,9 +101,7 @@ unsigned __init get_c0_compare_int(void) void __init plat_time_init(void) { - unsigned int est_freq, flags; - - local_irq_save(flags); + unsigned int est_freq; /* Set Data mode - binary. */ CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); @@ -114,6 +112,4 @@ void __init plat_time_init(void) (est_freq % 1000000) * 100 / 1000000); cpu_khz = est_freq / 1000; - - local_irq_restore(flags); } diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 33519ce49540..ae76795685cc 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -40,16 +40,38 @@ static inline int cpu_is_noncoherent_r10000(struct device *dev) current_cpu_type() == CPU_R12000); } +static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp) +{ + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM); + +#ifdef CONFIG_ZONE_DMA32 + if (dev == NULL) + gfp |= __GFP_DMA; + else if (dev->coherent_dma_mask < DMA_BIT_MASK(24)) + gfp |= __GFP_DMA; + else +#endif +#ifdef CONFIG_ZONE_DMA32 + if (dev->coherent_dma_mask < DMA_BIT_MASK(32)) + gfp |= __GFP_DMA32; + else +#endif + ; + + /* Don't invoke OOM killer */ + gfp |= __GFP_NORETRY; + + return gfp; +} + void *dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t * dma_handle, gfp_t gfp) { void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + gfp = massage_gfp_flags(dev, gfp); - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; ret = (void *) __get_free_pages(gfp, get_order(size)); if (ret != NULL) { @@ -67,11 +89,8 @@ void *dma_alloc_coherent(struct device *dev, size_t size, { void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + gfp = massage_gfp_flags(dev, gfp); - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; ret = (void *) __get_free_pages(gfp, get_order(size)); if (ret) { @@ -343,7 +362,7 @@ int dma_supported(struct device *dev, u64 mask) * so we can't guarantee allocations that must be * within a tighter range than GFP_DMA.. */ - if (mask < 0x00ffffff) + if (mask < DMA_BIT_MASK(24)) return 0; return 1; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index ec3b9e9f30f4..480dec04f552 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -347,11 +347,8 @@ static int __init page_is_ram(unsigned long pagenr) void __init paging_init(void) { - unsigned long zones_size[MAX_NR_ZONES] = { 0, }; -#ifndef CONFIG_FLATMEM - unsigned long zholes_size[MAX_NR_ZONES] = { 0, }; - unsigned long i, j, pfn; -#endif + unsigned long max_zone_pfns[MAX_NR_ZONES]; + unsigned long lastpfn; pagetable_init(); @@ -361,35 +358,27 @@ void __init paging_init(void) kmap_coherent_init(); #ifdef CONFIG_ZONE_DMA - if (min_low_pfn < MAX_DMA_PFN && MAX_DMA_PFN <= max_low_pfn) { - zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn; - zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN; - } else if (max_low_pfn < MAX_DMA_PFN) - zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn; - else + max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN; #endif - zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; - +#ifdef CONFIG_ZONE_DMA32 + max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN; +#endif + max_zone_pfns[ZONE_NORMAL] = max_low_pfn; + lastpfn = max_low_pfn; #ifdef CONFIG_HIGHMEM - zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn; + max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; + lastpfn = highend_pfn; - if (cpu_has_dc_aliases && zones_size[ZONE_HIGHMEM]) { + if (cpu_has_dc_aliases && max_low_pfn != highend_pfn) { printk(KERN_WARNING "This processor doesn't support highmem." - " %ldk highmem ignored\n", zones_size[ZONE_HIGHMEM]); - zones_size[ZONE_HIGHMEM] = 0; + " %ldk highmem ignored\n", + (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10)); + max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn; + lastpfn = max_low_pfn; } #endif -#ifdef CONFIG_FLATMEM - free_area_init(zones_size); -#else - pfn = min_low_pfn; - for (i = 0; i < MAX_NR_ZONES; i++) - for (j = 0; j < zones_size[i]; j++, pfn++) - if (!page_is_ram(pfn)) - zholes_size[i]++; - free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size); -#endif + free_area_init_nodes(max_zone_pfns); } static struct kcore_list kcore_mem, kcore_vmalloc; diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig index 6b293ce0935f..90261b83db04 100644 --- a/arch/mips/pmc-sierra/Kconfig +++ b/arch/mips/pmc-sierra/Kconfig @@ -5,12 +5,14 @@ choice config PMC_MSP4200_EVAL bool "PMC-Sierra MSP4200 Eval Board" select CEVT_R4K + select CSRC_R4K select IRQ_MSP_SLP select HW_HAS_PCI config PMC_MSP4200_GW bool "PMC-Sierra MSP4200 VoIP Gateway" select CEVT_R4K + select CSRC_R4K select IRQ_MSP_SLP select HW_HAS_PCI diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c index 26854fb11e7c..1617241d2737 100644 --- a/arch/mips/sgi-ip22/ip22-eisa.c +++ b/arch/mips/sgi-ip22/ip22-eisa.c @@ -36,6 +36,7 @@ #include <asm/sgi/ioc.h> #include <asm/sgi/mc.h> #include <asm/sgi/ip22.h> +#include <asm/i8259.h> /* I2 has four EISA slots. */ #define IP22_EISA_MAX_SLOTS 4 @@ -93,126 +94,11 @@ static irqreturn_t ip22_eisa_intr(int irq, void *dev_id) return IRQ_NONE; } -static void enable_eisa1_irq(unsigned int irq) -{ - u8 mask; - - mask = inb(EISA_INT1_MASK); - mask &= ~((u8) (1 << irq)); - outb(mask, EISA_INT1_MASK); -} - -static unsigned int startup_eisa1_irq(unsigned int irq) -{ - u8 edge; - - /* Only use edge interrupts for EISA */ - - edge = inb(EISA_INT1_EDGE_LEVEL); - edge &= ~((u8) (1 << irq)); - outb(edge, EISA_INT1_EDGE_LEVEL); - - enable_eisa1_irq(irq); - return 0; -} - -static void disable_eisa1_irq(unsigned int irq) -{ - u8 mask; - - mask = inb(EISA_INT1_MASK); - mask |= ((u8) (1 << irq)); - outb(mask, EISA_INT1_MASK); -} - -static void mask_and_ack_eisa1_irq(unsigned int irq) -{ - disable_eisa1_irq(irq); - - outb(0x20, EISA_INT1_CTRL); -} - -static void end_eisa1_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_eisa1_irq(irq); -} - -static struct irq_chip ip22_eisa1_irq_type = { - .name = "IP22 EISA", - .startup = startup_eisa1_irq, - .ack = mask_and_ack_eisa1_irq, - .mask = disable_eisa1_irq, - .mask_ack = mask_and_ack_eisa1_irq, - .unmask = enable_eisa1_irq, - .end = end_eisa1_irq, -}; - -static void enable_eisa2_irq(unsigned int irq) -{ - u8 mask; - - mask = inb(EISA_INT2_MASK); - mask &= ~((u8) (1 << (irq - 8))); - outb(mask, EISA_INT2_MASK); -} - -static unsigned int startup_eisa2_irq(unsigned int irq) -{ - u8 edge; - - /* Only use edge interrupts for EISA */ - - edge = inb(EISA_INT2_EDGE_LEVEL); - edge &= ~((u8) (1 << (irq - 8))); - outb(edge, EISA_INT2_EDGE_LEVEL); - - enable_eisa2_irq(irq); - return 0; -} - -static void disable_eisa2_irq(unsigned int irq) -{ - u8 mask; - - mask = inb(EISA_INT2_MASK); - mask |= ((u8) (1 << (irq - 8))); - outb(mask, EISA_INT2_MASK); -} - -static void mask_and_ack_eisa2_irq(unsigned int irq) -{ - disable_eisa2_irq(irq); - - outb(0x20, EISA_INT2_CTRL); -} - -static void end_eisa2_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_eisa2_irq(irq); -} - -static struct irq_chip ip22_eisa2_irq_type = { - .name = "IP22 EISA", - .startup = startup_eisa2_irq, - .ack = mask_and_ack_eisa2_irq, - .mask = disable_eisa2_irq, - .mask_ack = mask_and_ack_eisa2_irq, - .unmask = enable_eisa2_irq, - .end = end_eisa2_irq, -}; - static struct irqaction eisa_action = { .handler = ip22_eisa_intr, .name = "EISA", }; -static struct irqaction cascade_action = { - .handler = no_action, - .name = "EISA cascade", -}; - int __init ip22_eisa_init(void) { int i, c; @@ -248,29 +134,13 @@ int __init ip22_eisa_init(void) outb(1, EISA_EXT_NMI_RESET_CTRL); udelay(50); /* Wait long enough for the dust to settle */ outb(0, EISA_EXT_NMI_RESET_CTRL); - outb(0x11, EISA_INT1_CTRL); - outb(0x11, EISA_INT2_CTRL); - outb(0, EISA_INT1_MASK); - outb(8, EISA_INT2_MASK); - outb(4, EISA_INT1_MASK); - outb(2, EISA_INT2_MASK); - outb(1, EISA_INT1_MASK); - outb(1, EISA_INT2_MASK); - outb(0xfb, EISA_INT1_MASK); - outb(0xff, EISA_INT2_MASK); outb(0, EISA_DMA2_WRITE_SINGLE); - for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) { - if (i < (SGINT_EISA + 8)) - set_irq_chip(i, &ip22_eisa1_irq_type); - else - set_irq_chip(i, &ip22_eisa2_irq_type); - } + init_i8259_irqs(); /* Cannot use request_irq because of kmalloc not being ready at such * an early stage. Yes, I've been bitten... */ setup_irq(SGI_EISA_IRQ, &eisa_action); - setup_irq(SGINT_EISA + 2, &cascade_action); EISA_bus = 1; return 0; diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c index e19d60d5fcc1..0177566475d4 100644 --- a/arch/mips/sgi-ip22/ip22-nvram.c +++ b/arch/mips/sgi-ip22/ip22-nvram.c @@ -32,19 +32,19 @@ for (x=0; x<100000; x++) __asm__ __volatile__(""); }) #define eeprom_cs_on(ptr) ({ \ - *ptr &= ~EEPROM_DATO; \ - *ptr &= ~EEPROM_ECLK; \ - *ptr &= ~EEPROM_EPROT; \ - delay(); \ - *ptr |= EEPROM_CSEL; \ - *ptr |= EEPROM_ECLK; }) + __raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr); \ + __raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr); \ + __raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr); \ + delay(); \ + __raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr); \ + __raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); }) #define eeprom_cs_off(ptr) ({ \ - *ptr &= ~EEPROM_ECLK; \ - *ptr &= ~EEPROM_CSEL; \ - *ptr |= EEPROM_EPROT; \ - *ptr |= EEPROM_ECLK; }) + __raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr); \ + __raw_writel(__raw_readl(ptr) & ~EEPROM_CSEL, ptr); \ + __raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr); \ + __raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); }) #define BITS_IN_COMMAND 11 /* @@ -60,15 +60,17 @@ static inline void eeprom_cmd(unsigned int *ctrl, unsigned cmd, unsigned reg) ser_cmd = cmd | (reg << (16 - BITS_IN_COMMAND)); for (i = 0; i < BITS_IN_COMMAND; i++) { if (ser_cmd & (1<<15)) /* if high order bit set */ - writel(readl(ctrl) | EEPROM_DATO, ctrl); + __raw_writel(__raw_readl(ctrl) | EEPROM_DATO, ctrl); else - writel(readl(ctrl) & ~EEPROM_DATO, ctrl); - writel(readl(ctrl) & ~EEPROM_ECLK, ctrl); - writel(readl(ctrl) | EEPROM_ECLK, ctrl); + __raw_writel(__raw_readl(ctrl) & ~EEPROM_DATO, ctrl); + __raw_writel(__raw_readl(ctrl) & ~EEPROM_ECLK, ctrl); + delay(); + __raw_writel(__raw_readl(ctrl) | EEPROM_ECLK, ctrl); + delay(); ser_cmd <<= 1; } /* see data sheet timing diagram */ - writel(readl(ctrl) & ~EEPROM_DATO, ctrl); + __raw_writel(__raw_readl(ctrl) & ~EEPROM_DATO, ctrl); } unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg) @@ -76,18 +78,18 @@ unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg) unsigned short res = 0; int i; - writel(readl(ctrl) & ~EEPROM_EPROT, ctrl); + __raw_writel(__raw_readl(ctrl) & ~EEPROM_EPROT, ctrl); eeprom_cs_on(ctrl); eeprom_cmd(ctrl, EEPROM_READ, reg); /* clock the data ouf of serial mem */ for (i = 0; i < 16; i++) { - writel(readl(ctrl) & ~EEPROM_ECLK, ctrl); + __raw_writel(__raw_readl(ctrl) & ~EEPROM_ECLK, ctrl); delay(); - writel(readl(ctrl) | EEPROM_ECLK, ctrl); + __raw_writel(__raw_readl(ctrl) | EEPROM_ECLK, ctrl); delay(); res <<= 1; - if (readl(ctrl) & EEPROM_DATI) + if (__raw_readl(ctrl) & EEPROM_DATI) res |= 1; } diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index aab17ddd2f30..cab7cc22ab67 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -209,18 +209,18 @@ static unsigned long macepci_mask; static void enable_macepci_irq(unsigned int irq) { - macepci_mask |= MACEPCI_CONTROL_INT(irq - 9); + macepci_mask |= MACEPCI_CONTROL_INT(irq - MACEPCI_SCSI0_IRQ); mace->pci.control = macepci_mask; - crime_mask |= 1 << (irq - 1); + crime_mask |= 1 << (irq - CRIME_IRQ_BASE); crime->imask = crime_mask; } static void disable_macepci_irq(unsigned int irq) { - crime_mask &= ~(1 << (irq - 1)); + crime_mask &= ~(1 << (irq - CRIME_IRQ_BASE)); crime->imask = crime_mask; flush_crime_bus(); - macepci_mask &= ~MACEPCI_CONTROL_INT(irq - 9); + macepci_mask &= ~MACEPCI_CONTROL_INT(irq - MACEPCI_SCSI0_IRQ); mace->pci.control = macepci_mask; flush_mace_bus(); } @@ -299,7 +299,7 @@ static void enable_maceisa_irq(unsigned int irq) pr_debug("crime_int %08x enabled\n", crime_int); crime_mask |= crime_int; crime->imask = crime_mask; - maceisa_mask |= 1 << (irq - 33); + maceisa_mask |= 1 << (irq - MACEISA_AUDIO_SW_IRQ); mace->perif.ctrl.imask = maceisa_mask; } @@ -307,7 +307,7 @@ static void disable_maceisa_irq(unsigned int irq) { unsigned int crime_int = 0; - maceisa_mask &= ~(1 << (irq - 33)); + maceisa_mask &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ)); if (!(maceisa_mask & MACEISA_AUDIO_INT)) crime_int |= MACE_AUDIO_INT; if (!(maceisa_mask & MACEISA_MISC_INT)) @@ -331,7 +331,7 @@ static void mask_and_ack_maceisa_irq(unsigned int irq) case MACEISA_SERIAL2_TDMAPR_IRQ: /* edge triggered */ mace_int = mace->perif.ctrl.istat; - mace_int &= ~(1 << (irq - 33)); + mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ)); mace->perif.ctrl.istat = mace_int; break; } @@ -359,13 +359,17 @@ static struct irq_chip ip32_maceisa_interrupt = { static void enable_mace_irq(unsigned int irq) { - crime_mask |= 1 << (irq - 1); + unsigned int bit = irq - CRIME_IRQ_BASE; + + crime_mask |= (1 << bit); crime->imask = crime_mask; } static void disable_mace_irq(unsigned int irq) { - crime_mask &= ~(1 << (irq - 1)); + unsigned int bit = irq - CRIME_IRQ_BASE; + + crime_mask &= ~(1 << bit); crime->imask = crime_mask; flush_crime_bus(); } @@ -489,7 +493,7 @@ void __init arch_init_irq(void) mace->perif.ctrl.imask = 0; mips_cpu_irq_init(); - for (irq = MIPS_CPU_IRQ_BASE + 8; irq <= IP32_IRQ_MAX; irq++) { + for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) { switch (irq) { case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ: set_irq_chip(irq, &ip32_mace_interrupt); diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index eeb089f20c0d..559acc09c819 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -6,6 +6,7 @@ choice config CASIO_E55 bool "CASIO CASSIOPEIA E-10/15/55/65" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select IRQ_CPU select ISA @@ -15,6 +16,7 @@ config CASIO_E55 config IBM_WORKPAD bool "IBM WorkPad z50" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select IRQ_CPU select ISA @@ -24,6 +26,7 @@ config IBM_WORKPAD config NEC_CMBVR4133 bool "NEC CMB-VR4133" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI @@ -33,6 +36,7 @@ config NEC_CMBVR4133 config TANBAC_TB022X bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI @@ -48,6 +52,7 @@ config TANBAC_TB022X config VICTOR_MPC30X bool "Victor MP-C303/304" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI @@ -58,6 +63,7 @@ config VICTOR_MPC30X config ZAO_CAPCELLA bool "ZAO Networks Capcella" select CEVT_R4K + select CSRC_R4K select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 116b03a45636..7aa1dc6d67c8 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -11,10 +11,9 @@ endif $(srctree)/arch/x86/Makefile%: ; ifeq ($(CONFIG_X86_32),y) + UTS_MACHINE := i386 include $(srctree)/arch/x86/Makefile_32 else + UTS_MACHINE := x86_64 include $(srctree)/arch/x86/Makefile_64 endif - - - |