diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/alpha/boot/tools/objstrip.c | 2 | ||||
-rw-r--r-- | arch/alpha/include/asm/fcntl.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-at91/Kconfig | 20 | ||||
-rw-r--r-- | arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 23 | ||||
-rw-r--r-- | arch/parisc/include/asm/fcntl.h | 2 | ||||
-rw-r--r-- | arch/powerpc/boot/addRamDisk.c | 6 | ||||
-rw-r--r-- | arch/sparc/boot/btfixupprep.c | 8 | ||||
-rw-r--r-- | arch/sparc/boot/piggyback_32.c | 10 | ||||
-rw-r--r-- | arch/sparc/boot/piggyback_64.c | 2 |
9 files changed, 40 insertions, 35 deletions
diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c index 9d0727d18aee..367d53d031fc 100644 --- a/arch/alpha/boot/tools/objstrip.c +++ b/arch/alpha/boot/tools/objstrip.c @@ -35,7 +35,7 @@ const char * prog_name; -void +static void usage (void) { fprintf(stderr, diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index 73126e4dd639..25da0017ec87 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -26,8 +26,6 @@ #define F_GETOWN 6 /* for sockets. */ #define F_SETSIG 10 /* for sockets. */ #define F_GETSIG 11 /* for sockets. */ -#define F_SETOWN_EX 15 -#define F_GETOWN_EX 16 /* for posix fcntl() and lockf() */ #define F_RDLCK 1 diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index e35d54d43e70..2fd88437348b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -289,13 +289,6 @@ config MACH_NEOCORE926 help Select this if you are using the Adeneo Neocore 926 board. -config MACH_AT91SAM9G20EK_2MMC - bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots" - depends on ARCH_AT91SAM9G20 - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - Rev A or B modified for 2 MMC Slots. - endif # ---------------------------------------------------------- @@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" depends on ARCH_AT91SAM9G20 help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit. + Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit + that embeds only one SD/MMC slot. + +config MACH_AT91SAM9G20EK_2MMC + bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit + with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and + onwards. config MACH_CPU9G20 bool "Eukrea CPU9G20 board" @@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c index a28e53faf71d..a4102d72cc9b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c +++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c @@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_ATMELMCI) +#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = { * MACB Ethernet device */ static struct at91_eth_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PC12, + .phy_irq_pin = AT91_PIN_PB0, .is_rmii = 1, }; @@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) - * det_pin and wp_pin are not connected + * wp_pin is not connected */ #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata ek_mmc_data = { .slot[0] = { .bus_width = 4, - .detect_pin = -ENODEV, + .detect_pin = AT91_PIN_PC2, .wp_pin = -ENODEV, }, .slot[1] = { .bus_width = 4, - .detect_pin = -ENODEV, + .detect_pin = AT91_PIN_PC9, .wp_pin = -ENODEV, }, }; #else -static struct amci_platform_data __initdata ek_mmc_data = { +static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, /* Only one slot so use slot B */ + .wire4 = 1, + .det_pin = AT91_PIN_PC9, }; #endif @@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = { static struct gpio_led ek_leds[] = { { /* "bottom" led, green, userled1 to be defined */ .name = "ds5", - .gpio = AT91_PIN_PB12, + .gpio = AT91_PIN_PB8, .active_low = 1, .default_trigger = "none", }, { /* "power" led, yellow */ .name = "ds1", - .gpio = AT91_PIN_PB13, + .gpio = AT91_PIN_PB9, .default_trigger = "heartbeat", } }; @@ -254,7 +257,11 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &ek_mmc_data); +#else + at91_add_device_mmc(0, &ek_mmc_data); +#endif /* I2C */ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h index 5f39d5597ced..1e1c824764ee 100644 --- a/arch/parisc/include/asm/fcntl.h +++ b/arch/parisc/include/asm/fcntl.h @@ -28,8 +28,6 @@ #define F_SETOWN 12 /* for sockets. */ #define F_SETSIG 13 /* for sockets. */ #define F_GETSIG 14 /* for sockets. */ -#define F_GETOWN_EX 15 -#define F_SETOWN_EX 16 /* for posix fcntl() and lockf() */ #define F_RDLCK 01 diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c index c02a99952be7..893f446cbd22 100644 --- a/arch/powerpc/boot/addRamDisk.c +++ b/arch/powerpc/boot/addRamDisk.c @@ -58,7 +58,7 @@ static int check_elf64(void *p, int size, struct addr_range *r) return 64; } -void get4k(FILE *file, char *buf ) +static void get4k(FILE *file, char *buf ) { unsigned j; unsigned num = fread(buf, 1, 4096, file); @@ -66,12 +66,12 @@ void get4k(FILE *file, char *buf ) buf[j] = 0; } -void put4k(FILE *file, char *buf ) +static void put4k(FILE *file, char *buf ) { fwrite(buf, 1, 4096, file); } -void death(const char *msg, FILE *fdesc, const char *fname) +static void death(const char *msg, FILE *fdesc, const char *fname) { fprintf(stderr, msg); fclose(fdesc); diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c index 52a4208fe4f0..bbf91b9c3d39 100644 --- a/arch/sparc/boot/btfixupprep.c +++ b/arch/sparc/boot/btfixupprep.c @@ -61,14 +61,14 @@ unsigned long lastfoffset = -1; unsigned long lastfrelno; btfixup *lastf; -void fatal(void) __attribute__((noreturn)); -void fatal(void) +static void fatal(void) __attribute__((noreturn)); +static void fatal(void) { fprintf(stderr, "Malformed output from objdump\n%s\n", buffer); exit(1); } -btfixup *find(int type, char *name) +static btfixup *find(int type, char *name) { int i; for (i = 0; i < last; i++) { @@ -88,7 +88,7 @@ btfixup *find(int type, char *name) return array + last - 1; } -void set_mode (char *buffer) +static void set_mode (char *buffer) { for (mode = 0;; mode++) if (buffer[mode] < '0' || buffer[mode] > '9') diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c index e8dc9adfcd61..ac944aec7301 100644 --- a/arch/sparc/boot/piggyback_32.c +++ b/arch/sparc/boot/piggyback_32.c @@ -35,17 +35,17 @@ * as PROM looks for a.out image only. */ -unsigned short ld2(char *p) +static unsigned short ld2(char *p) { return (p[0] << 8) | p[1]; } -unsigned int ld4(char *p) +static unsigned int ld4(char *p) { return (p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3]; } -void st4(char *p, unsigned int x) +static void st4(char *p, unsigned int x) { p[0] = x >> 24; p[1] = x >> 16; @@ -53,7 +53,7 @@ void st4(char *p, unsigned int x) p[3] = x; } -void usage(void) +static void usage(void) { /* fs_img.gz is an image of initial ramdisk. */ fprintf(stderr, "Usage: piggyback vmlinux.aout System.map fs_img.gz\n"); @@ -61,7 +61,7 @@ void usage(void) exit(1); } -void die(char *str) +static void die(char *str) { perror (str); exit(1); diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c index c63fd1b6bdd4..a26a686cb5aa 100644 --- a/arch/sparc/boot/piggyback_64.c +++ b/arch/sparc/boot/piggyback_64.c @@ -32,7 +32,7 @@ /* Note: run this on an a.out kernel (use elftoaout for it), as PROM looks for a.out image onlly usage: piggyback vmlinux System.map tail, where tail is gzipped fs of the initial ramdisk */ -void die(char *str) +static void die(char *str) { perror (str); exit(1); |