diff options
Diffstat (limited to 'arch')
60 files changed, 269 insertions, 144 deletions
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9854ff4279e0..11828e632532 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 68374ba6a943..c79f61faa3a5 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -243,7 +243,7 @@ typedef struct { #define ATOMIC64_INIT(i) { (i) } -static inline u64 atomic64_read(atomic64_t *v) +static inline u64 atomic64_read(const atomic64_t *v) { u64 result; diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index 3d2220498abc..6ddbe446425e 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -60,13 +60,13 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_CPU_USE_DOMAINS -#define set_domain(x) \ - do { \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c3, c0 @ set domain" \ - : : "r" (x)); \ - isb(); \ - } while (0) +static inline void set_domain(unsigned val) +{ + asm volatile( + "mcr p15, 0, %0, c3, c0 @ set domain" + : : "r" (val)); + isb(); +} #define modify_domain(dom,type) \ do { \ @@ -78,8 +78,8 @@ } while (0) #else -#define set_domain(x) do { } while (0) -#define modify_domain(dom,type) do { } while (0) +static inline void set_domain(unsigned val) { } +static inline void modify_domain(unsigned dom, unsigned type) { } #endif /* diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index b79f8e97f775..af7b0bda3355 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -148,7 +148,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 -#define TIF_SYSCALL_RESTARTSYS 10 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -164,11 +163,9 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_RESTARTSYS) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index ba32b393b3f0..38c1a3b103a0 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -187,8 +187,8 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("mov pc, r",0,2f,"") TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") TEST_BB( "sub pc, pc, #1b-2b+8") -#if __LINUX_ARM_ARCH__ >= 6 - TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */ +#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) + TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 186c8cb982c5..a02eada3aa5d 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -503,7 +503,7 @@ __hw_perf_event_init(struct perf_event *event) event_requires_mode_exclusion(&event->attr)) { pr_debug("ARM performance counters do not support " "mode exclusion\n"); - return -EPERM; + return -EOPNOTSUPP; } /* diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 5700a7ae7f0b..14e38261cd31 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -25,7 +25,6 @@ #include <linux/regset.h> #include <linux/audit.h> #include <linux/tracehook.h> -#include <linux/unistd.h> #include <asm/pgtable.h> #include <asm/traps.h> @@ -918,8 +917,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS)) - scno = __NR_restart_syscall - __NR_SYSCALL_BASE; if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index fd2392a17ac1..536c5d6b340b 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -27,6 +27,7 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) +#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -47,6 +48,18 @@ const unsigned long sigreturn_codes[7] = { }; /* + * Either we support OABI only, or we have EABI with the OABI + * compat layer enabled. In the later case we don't know if + * user space is EABI or not, and if not we must not clobber r7. + * Always using the OABI syscall solves that issue and works for + * all those cases. + */ +const unsigned long syscall_restart_code[2] = { + SWI_SYS_RESTART, /* swi __NR_restart_syscall */ + 0xe49df004, /* ldr pc, [sp], #4 */ +}; + +/* * atomically swap in the new signal mask, and wait for a signal. */ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) @@ -592,10 +605,12 @@ static void do_signal(struct pt_regs *regs, int syscall) case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: - case -ERESTART_RESTARTBLOCK: regs->ARM_r0 = regs->ARM_ORIG_r0; regs->ARM_pc = restart_addr; break; + case -ERESTART_RESTARTBLOCK: + regs->ARM_r0 = -EINTR; + break; } } @@ -611,14 +626,12 @@ static void do_signal(struct pt_regs *regs, int syscall) * debugger has chosen to restart at a different PC. */ if (regs->ARM_pc == restart_addr) { - if (retval == -ERESTARTNOHAND || - retval == -ERESTART_RESTARTBLOCK + if (retval == -ERESTARTNOHAND || (retval == -ERESTARTSYS && !(ka.sa.sa_flags & SA_RESTART))) { regs->ARM_r0 = -EINTR; regs->ARM_pc = continue_addr; } - clear_thread_flag(TIF_SYSCALL_RESTARTSYS); } handle_signal(signr, &ka, &info, regs); @@ -632,8 +645,29 @@ static void do_signal(struct pt_regs *regs, int syscall) * ignore the restart. */ if (retval == -ERESTART_RESTARTBLOCK - && regs->ARM_pc == restart_addr) - set_thread_flag(TIF_SYSCALL_RESTARTSYS); + && regs->ARM_pc == continue_addr) { + if (thumb_mode(regs)) { + regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; + regs->ARM_pc -= 2; + } else { +#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT) + regs->ARM_r7 = __NR_restart_syscall; + regs->ARM_pc -= 4; +#else + u32 __user *usp; + + regs->ARM_sp -= 4; + usp = (u32 __user *)regs->ARM_sp; + + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } +#endif + } + } } restore_saved_sigmask(); diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 5ff067b7c752..6fcfe8398aa4 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -8,5 +8,7 @@ * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) +#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; +extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4928d89758f4..3647170e9a16 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -820,6 +820,8 @@ void __init early_trap_init(void *vectors_base) */ memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), sigreturn_codes, sizeof(sigreturn_codes)); + memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE), + syscall_restart_code, sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index 226949dc4ac0..f953bb54aa9d 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -50,5 +50,6 @@ #define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index ad1165d488c1..d52b0ef313b7 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -78,6 +78,7 @@ /* North-South Bridge */ #define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) /* Cryptographic Engine */ #define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 920a8cc42726..c6422fb10bae 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -201,7 +201,6 @@ int __init mx35_clocks_init() pr_err("i.MX35 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); @@ -264,6 +263,14 @@ int __init mx35_clocks_init() clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + /* + * SCC is needed to boot via mmc after a watchdog reset. The clock code + * before conversion to common clk also enabled UART1 (which isn't + * handled here and not needed for mmc) and IIM (which is enabled + * unconditionally above). + */ + clk_prepare_enable(clk[scc_gate]); + imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index f76edb96a48a..ba09552fe5fe 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -38,7 +38,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/system.h> +#include <asm/system_info.h> #include <mach/common.h> #include <mach/iomux-mx27.h> diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h deleted file mode 100644 index 0e135a599f3e..000000000000 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_MACH_GPIO_PXA_H -#define __ASM_MACH_GPIO_PXA_H - -#include <mach/addr-map.h> -#include <mach/cputype.h> -#include <mach/irqs.h> - -#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -#define gpio_to_bank(gpio) ((gpio) >> 5) - -/* NOTE: these macros are defined here to make optimization of - * gpio_{get,set}_value() to work when 'gpio' is a constant. - * Usage of these macros otherwise is no longer recommended, - * use generic GPIO API whenever possible. - */ -#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) - -#include <plat/gpio-pxa.h> - -#endif /* __ASM_MACH_GPIO_PXA_H */ diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h index c64dbb96dbad..eb187e0e059b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -31,5 +31,6 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 3674497162e3..e807c4c52a0b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -42,6 +42,7 @@ #define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 #define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 #define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 +#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000 #define MV78XX0_CORE_REGS_SIZE SZ_16K #define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) @@ -59,6 +60,7 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) +#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE) /* * Register Map diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c index 5e90b9dcdef8..f5f061757deb 100644 --- a/arch/arm/mach-mxs/mach-apx4devkit.c +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -205,6 +205,16 @@ static int apx4devkit_phy_fixup(struct phy_device *phy) return 0; } +static void __init apx4devkit_fec_phy_clk_enable(void) +{ + struct clk *clk; + + /* Enable fec phy clock */ + clk = clk_get_sys("enet_out", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static void __init apx4devkit_init(void) { mx28_soc_init(); @@ -225,6 +235,7 @@ static void __init apx4devkit_init(void) phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); + apx4devkit_fec_phy_clk_enable(); mx28_add_fec(0, &mx28_fec_pdata); mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 8fa2fc3a4c3c..779734d8ba37 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -494,8 +494,8 @@ static void __init overo_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_hsmmc_init(mmc); overo_i2c_init(); + omap_hsmmc_init(mmc); omap_display_init(&overo_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f7b58609bad8..6227e9505c2d 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -31,12 +31,16 @@ * * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this * clockdomain. (Currently, this applies to OMAP3 clockdomains only.) + * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is + * active whenever the MPU is active. True for interconnects and + * the WKUP clockdomains. */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) #define CLKDM_CAN_FORCE_WAKEUP (1 << 1) #define CLKDM_CAN_ENABLE_AUTO (1 << 2) #define CLKDM_CAN_DISABLE_AUTO (1 << 3) #define CLKDM_NO_AUTODEPS (1 << 4) +#define CLKDM_ACTIVE_WITH_MPU (1 << 5) #define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) #define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index 839145e1cfbe..4972219653ce 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = { .name = "wkup_clkdm", .pwrdm = { .name = "wkup_pwrdm" }, .dep_bit = OMAP_EN_WKUP_SHIFT, + .flags = CLKDM_ACTIVE_WITH_MPU, }; diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index c53425847493..7f2133abe7d3 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = { .cm_inst = OMAP4430_PRM_WKUP_CM_INST, .clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS, .dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU, }; static struct clockdomain emu_sys_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 773193670ea2..2d710f50fca2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * - * If module is marked as SWSUP_SIDLE, force the module out of slave - * idle; otherwise, configure it for smart-idle. If module is marked - * as SWSUP_MSUSPEND, force the module out of master standby; - * otherwise, configure it for smart-standby. No return value. + * Ensure that the OCP_SYSCONFIG register for the IP block represented + * by @oh is set to indicate to the PRCM that the IP block is active. + * Usually this means placing the module into smart-idle mode and + * smart-standby, but if there is a bug in the automatic idle handling + * for the IP block, it may need to be placed into the force-idle or + * no-idle variants of these modes. No return value. */ static void _enable_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; + bool clkdm_act; if (!oh->class->sysc) return; @@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + clkdm_act = ((oh->clkdm && + oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) || + (oh->_clk && oh->_clk->clkdm && + oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU)); + if (clkdm_act && !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? + HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } @@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ + if (oh->flags & HWMOD_SWSUP_SIDLE || + !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f30e861ce6d9..b7bcba5221ba 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1928,7 +1928,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp1_hwmod = { @@ -1963,7 +1963,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp2_hwmod = { @@ -1998,7 +1998,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp3_hwmod = { @@ -2033,7 +2033,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp4_hwmod = { @@ -3864,7 +3864,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { }; /* usb_host_fs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = { .master = &omap44xx_usb_host_fs_hwmod, .slave = &omap44xx_l3_main_2_hwmod, .clk = "l3_div_ck", @@ -3922,7 +3922,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { }; /* aess -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = { .master = &omap44xx_aess_hwmod, .slave = &omap44xx_l4_abe_hwmod, .clk = "ocp_abe_iclk", @@ -4013,7 +4013,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { }; /* l4_abe -> aess */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -4031,7 +4031,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { }; /* l4_abe -> aess (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -5857,7 +5857,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = { }; /* l4_cfg -> usb_host_fs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_usb_host_fs_hwmod, .clk = "l4_div_ck", @@ -6014,13 +6014,13 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, - &omap44xx_usb_host_fs__l3_main_2, + /* &omap44xx_usb_host_fs__l3_main_2, */ &omap44xx_usb_host_hs__l3_main_2, &omap44xx_usb_otg_hs__l3_main_2, &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_aess__l4_abe, + /* &omap44xx_aess__l4_abe, */ &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, @@ -6029,8 +6029,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l4_wkup, &omap44xx_mpu__mpu_private, &omap44xx_l4_cfg__ocp_wp_noc, - &omap44xx_l4_abe__aess, - &omap44xx_l4_abe__aess_dma, + /* &omap44xx_l4_abe__aess, */ + /* &omap44xx_l4_abe__aess_dma, */ &omap44xx_l3_main_2__c2c, &omap44xx_l4_wkup__counter_32k, &omap44xx_l4_cfg__ctrl_module_core, @@ -6136,7 +6136,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__uart2, &omap44xx_l4_per__uart3, &omap44xx_l4_per__uart4, - &omap44xx_l4_cfg__usb_host_fs, + /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, &omap44xx_l4_cfg__usb_otg_hs, &omap44xx_l4_cfg__usb_tll_hs, diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 119d5a910f3a..43a979075338 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -32,6 +32,7 @@ #include "twl-common.h" #include "pm.h" #include "voltage.h" +#include "mux.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -77,6 +78,7 @@ void __init omap4_pmic_init(const char *pmic_type, struct twl6040_platform_data *twl6040_data, int twl6040_irq) { /* PMIC part*/ + omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(omap4_i2c1_board_info[0].type, pmic_type, sizeof(omap4_i2c1_board_info[0].type)); omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index d09da6a746b8..d3de84b0dcbe 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -127,7 +127,11 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO19_SSP2_SCLK, GPIO86_SSP2_RXD, GPIO87_SSP2_TXD, - GPIO88_GPIO, + GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */ + + /* BQ24022 Regulator */ + GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */ + GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */ /* HX4700 specific input GPIOs */ GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */ @@ -135,6 +139,10 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO14_GPIO, /* nWLAN_IRQ */ /* HX4700 specific output GPIOs */ + GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */ + GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */ + GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */ GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */ GPIO10_GPIO, /* GSM_IRQ */ @@ -872,14 +880,19 @@ static struct gpio global_gpios[] = { { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, + { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" }, { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, + { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" }, { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, + { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" }, }; static void __init hx4700_init(void) { int ret; + PCFR = PCFR_GPR_EN | PCFR_OPDE; + pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1); ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index e859fcdb3d58..fde0d23121dc 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -22,8 +22,13 @@ #include <mach/common.h> #include <mach/emev2.h> +#ifdef CONFIG_ARCH_SH73A0 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ of_machine_is_compatible("renesas,sh73a0")) +#else +#define is_sh73a0() (0) +#endif + #define is_r8a7779() machine_is_marzen() #ifdef CONFIG_ARCH_EMEV2 diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 1509a3cb5833..4fd93f5c49ec 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -625,11 +625,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &ab8500_device, }; -static struct platform_device *snowball_of_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, -}; - static void __init mop500_init_machine(void) { struct device *parent = NULL; @@ -769,6 +764,11 @@ MACHINE_END #ifdef CONFIG_MACH_UX500_DT +static struct platform_device *snowball_of_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, +}; + struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires DMA and call-back bindings. */ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), @@ -786,6 +786,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), + /* Requires device name bindings. */ + OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), {}, }; diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 741e71feca78..66e7f00884ab 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -63,8 +63,10 @@ static void __init ux500_timer_init(void) /* TODO: Once MTU has been DT:ed place code above into else. */ if (of_have_populated_dt()) { +#ifdef CONFIG_OF np = of_find_matching_node(NULL, prcmu_timer_of_match); if (!np) +#endif goto dt_fail; tmp_base = of_iomap(np, 0); diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index bec933b04ef0..e95bf84cc837 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -339,7 +339,6 @@ void __init pci_versatile_preinit(void) static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; - int devslot = PCI_SLOT(dev->devfn); /* slot, pin, irq * 24 1 27 diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index c471436c7952..2e8a1efdf7b8 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -64,7 +64,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #ifdef CONFIG_ZONE_DMA extern phys_addr_t arm_dma_limit; #else -#define arm_dma_limit ((u32)~0) +#define arm_dma_limit ((phys_addr_t)~0) #endif extern phys_addr_t arm_lowmem_limit; diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h index a09230a08e02..62ef17676b40 100644 --- a/arch/h8300/include/asm/pgtable.h +++ b/arch/h8300/include/asm/pgtable.h @@ -70,4 +70,7 @@ extern int is_in_rom(unsigned long); #define VMALLOC_END 0xffffffff #define arch_enter_lazy_cpu_mode() do {} while (0) + +#include <asm-generic/pgtable.h> + #endif /* _H8300_PGTABLE_H */ diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h index 356068cd0879..8725d1ad4272 100644 --- a/arch/h8300/include/asm/uaccess.h +++ b/arch/h8300/include/asm/uaccess.h @@ -100,7 +100,6 @@ extern int __put_user_bad(void); break; \ default: \ __gu_err = __get_user_bad(); \ - __gu_val = 0; \ break; \ } \ (x) = __gu_val; \ @@ -159,4 +158,6 @@ clear_user(void *to, unsigned long n) return 0; } +#define __clear_user clear_user + #endif /* _H8300_UACCESS_H */ diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c index fca10378701b..5adaadaf9218 100644 --- a/arch/h8300/kernel/signal.c +++ b/arch/h8300/kernel/signal.c @@ -447,7 +447,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ -statis void do_signal(struct pt_regs *regs) +static void do_signal(struct pt_regs *regs) { siginfo_t info; int signr; diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 32263a138aa6..e0f74191d553 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -27,6 +27,7 @@ #include <linux/profile.h> #include <asm/io.h> +#include <asm/irq_regs.h> #include <asm/timer.h> #define TICK_SIZE (tick_nsec / 1000) diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index ea453532a33c..075d87acd12a 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev) /* setup reset gpio used by pci */ reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); - if (reset_gpio > 0) + if (gpio_is_valid(reset_gpio)) devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset"); /* enable auto-switching between PCI and EBU */ @@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev) ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); /* toggle reset pin */ - if (reset_gpio > 0) { + if (gpio_is_valid(reset_gpio)) { __gpio_set_value(reset_gpio, 0); wmb(); mdelay(1); diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h index 55b79ef10028..44251b974f1d 100644 --- a/arch/mn10300/include/asm/ptrace.h +++ b/arch/mn10300/include/asm/ptrace.h @@ -81,9 +81,6 @@ struct pt_regs { #define PTRACE_GETFPREGS 14 #define PTRACE_SETFPREGS 15 -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - #ifdef __KERNEL__ #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 08251d6f6b11..ac519bbd42ff 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -123,7 +123,7 @@ static inline unsigned long current_stack_pointer(void) } #ifndef CONFIG_KGDB -void arch_release_thread_info(struct thread_info *ti) +void arch_release_thread_info(struct thread_info *ti); #endif #define get_thread_info(ti) get_task_struct((ti)->task) #define put_thread_info(ti) put_task_struct((ti)->task) diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index bd4e90dfe6c2..f8e66425cbf8 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -11,7 +11,6 @@ #ifndef _ASM_TIMEX_H #define _ASM_TIMEX_H -#include <asm/hardirq.h> #include <unit/timex.h> #define TICK_SIZE (tick_nsec / 1000) @@ -30,16 +29,6 @@ static inline cycles_t get_cycles(void) extern int init_clockevents(void); extern int init_clocksource(void); -static inline void setup_jiffies_interrupt(int irq, - struct irqaction *action) -{ - u16 tmp; - setup_irq(irq, action); - set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); - GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - tmp = GxICR(irq); -} - #endif /* __KERNEL__ */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c index 69cae0260786..ccce35e3e179 100644 --- a/arch/mn10300/kernel/cevt-mn10300.c +++ b/arch/mn10300/kernel/cevt-mn10300.c @@ -70,6 +70,16 @@ static void event_handler(struct clock_event_device *dev) { } +static inline void setup_jiffies_interrupt(int irq, + struct irqaction *action) +{ + u16 tmp; + setup_irq(irq, action); + set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); + GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + tmp = GxICR(irq); +} + int __init init_clockevents(void) { struct clock_event_device *cd; diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h index a5ac755dd69f..2df440105a80 100644 --- a/arch/mn10300/kernel/internal.h +++ b/arch/mn10300/kernel/internal.h @@ -9,6 +9,8 @@ * 2 of the Licence, or (at your option) any later version. */ +#include <linux/irqreturn.h> + struct clocksource; struct clock_event_device; diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 2381df83bd00..35932a8de8b8 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -170,9 +170,9 @@ mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask, case SC1TXIRQ: #ifdef CONFIG_MN10300_TTYSM1_TIMER12 case TM12IRQ: -#elif CONFIG_MN10300_TTYSM1_TIMER9 +#elif defined(CONFIG_MN10300_TTYSM1_TIMER9) case TM9IRQ: -#elif CONFIG_MN10300_TTYSM1_TIMER3 +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) case TM3IRQ: #endif /* CONFIG_MN10300_TTYSM1_TIMER12 */ #endif /* CONFIG_MN10300_TTYSM1 */ diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 94a9c6d53e1b..b900e5afa0ae 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -26,6 +26,7 @@ #include <linux/kdebug.h> #include <linux/bug.h> #include <linux/irq.h> +#include <linux/export.h> #include <asm/processor.h> #include <linux/uaccess.h> #include <asm/io.h> diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c index 159acb02cfd4..e244ebe637e1 100644 --- a/arch/mn10300/mm/dma-alloc.c +++ b/arch/mn10300/mm/dma-alloc.c @@ -15,6 +15,7 @@ #include <linux/string.h> #include <linux/pci.h> #include <linux/gfp.h> +#include <linux/export.h> #include <asm/io.h> static unsigned long pci_sram_allocated = 0xbc000000; diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h index cc18fe7d8b90..c37f9832cf17 100644 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include <linux/irq.h> -#endif /* __ASSEMBLY__ */ - #include <asm/timer-regs.h> #include <unit/clock.h> #include <asm/param.h> diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c index 43c246439413..53677694b165 100644 --- a/arch/mn10300/unit-asb2303/smc91111.c +++ b/arch/mn10300/unit-asb2303/smc91111.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <asm/io.h> +#include <asm/irq.h> #include <asm/timex.h> #include <asm/processor.h> #include <asm/intctl-regs.h> diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index 758af30d1a16..4cefc224f448 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include <linux/irq.h> -#endif /* __ASSEMBLY__ */ - #include <asm/timer-regs.h> #include <unit/clock.h> #include <asm/param.h> diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index e1becd6b7571..bc4adfaf815c 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <asm/io.h> +#include <asm/irq.h> #include <asm/setup.h> #include <asm/processor.h> #include <asm/intctl-regs.h> diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h index ddb7ed010706..42f32db75087 100644 --- a/arch/mn10300/unit-asb2364/include/unit/timex.h +++ b/arch/mn10300/unit-asb2364/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include <linux/irq.h> -#endif /* __ASSEMBLY__ */ - #include <asm/timer-regs.h> #include <unit/clock.h> #include <asm/param.h> diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 6eb75b80488c..0554ab062bdc 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -86,8 +86,8 @@ static inline bool arch_irqs_disabled(void) } #ifdef CONFIG_PPC_BOOK3E -#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory"); -#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory"); +#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory") +#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory") #else #define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1) #define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1) @@ -125,6 +125,8 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs) return !regs->softe; } +extern bool prep_irq_for_idle(void); + #else /* CONFIG_PPC64 */ #define SET_MSR_EE(x) mtmsr(x) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 1b415027ec0e..1f017bb7a7ce 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -229,7 +229,7 @@ notrace void arch_local_irq_restore(unsigned long en) */ if (unlikely(irq_happened != PACA_IRQ_HARD_DIS)) __hard_irq_disable(); -#ifdef CONFIG_TRACE_IRQFLAG +#ifdef CONFIG_TRACE_IRQFLAGS else { /* * We should already be hard disabled here. We had bugs @@ -286,6 +286,52 @@ void notrace restore_interrupts(void) __hard_irq_enable(); } +/* + * This is a helper to use when about to go into idle low-power + * when the latter has the side effect of re-enabling interrupts + * (such as calling H_CEDE under pHyp). + * + * You call this function with interrupts soft-disabled (this is + * already the case when ppc_md.power_save is called). The function + * will return whether to enter power save or just return. + * + * In the former case, it will have notified lockdep of interrupts + * being re-enabled and generally sanitized the lazy irq state, + * and in the latter case it will leave with interrupts hard + * disabled and marked as such, so the local_irq_enable() call + * in cpu_idle() will properly re-enable everything. + */ +bool prep_irq_for_idle(void) +{ + /* + * First we need to hard disable to ensure no interrupt + * occurs before we effectively enter the low power state + */ + hard_irq_disable(); + + /* + * If anything happened while we were soft-disabled, + * we return now and do not enter the low power state. + */ + if (lazy_irq_pending()) + return false; + + /* Tell lockdep we are about to re-enable */ + trace_hardirqs_on(); + + /* + * Mark interrupts as soft-enabled and clear the + * PACA_IRQ_HARD_DIS from the pending mask since we + * are about to hard enable as well as a side effect + * of entering the low power state. + */ + local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; + local_paca->soft_enabled = 1; + + /* Tell the caller to enter the low power state */ + return true; +} + #endif /* CONFIG_PPC64 */ int arch_show_interrupts(struct seq_file *p, int prec) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index a84aafce2a12..a1044f43becd 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -810,7 +810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) lwz r3,VCORE_NAPPING_THREADS(r5) lwz r4,VCPU_PTID(r9) li r0,1 - sldi r0,r0,r4 + sld r0,r0,r4 andc. r3,r3,r0 /* no sense IPI'ing ourselves */ beq 43f mulli r4,r4,PACA_SIZE /* get paca for thread 0 */ diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c index 3ff9013d6e79..ee02b30878ed 100644 --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -241,6 +241,7 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd) case H_PUT_TCE: return kvmppc_h_pr_put_tce(vcpu); case H_CEDE: + vcpu->arch.shared->msr |= MSR_EE; kvm_vcpu_block(vcpu); clear_bit(KVM_REQ_UNHALT, &vcpu->requests); vcpu->stat.halt_wakeup++; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 6e8f677f5646..1e95556dc692 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -639,7 +639,7 @@ static void __init parse_drconf_memory(struct device_node *memory) unsigned int n, rc, ranges, is_kexec_kdump = 0; unsigned long lmb_size, base, size, sz; int nid; - struct assoc_arrays aa; + struct assoc_arrays aa = { .arrays = NULL }; n = of_get_drconf_memory(memory, &dm); if (!n) diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index efdacc829576..d17e98bc0c10 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -42,11 +42,9 @@ static void cbe_power_save(void) { unsigned long ctrl, thread_switch_control; - /* - * We need to hard disable interrupts, the local_irq_enable() done by - * our caller upon return will hard re-enable. - */ - hard_irq_disable(); + /* Ensure our interrupt state is properly tracked */ + if (!prep_irq_for_idle()) + return; ctrl = mfspr(SPRN_CTRLF); @@ -81,6 +79,9 @@ static void cbe_power_save(void) */ ctrl &= ~(CTRL_RUNLATCH | CTRL_TE); mtspr(SPRN_CTRLT, ctrl); + + /* Re-enable interrupts in MSR */ + __hard_irq_enable(); } static int cbe_system_reset_exception(struct pt_regs *regs) diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index e61483e8e960..c71be66bd5dc 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -99,15 +99,18 @@ out: static void check_and_cede_processor(void) { /* - * Interrupts are soft-disabled at this point, - * but not hard disabled. So an interrupt might have - * occurred before entering NAP, and would be potentially - * lost (edge events, decrementer events, etc...) unless - * we first hard disable then check. + * Ensure our interrupt state is properly tracked, + * also checks if no interrupt has occurred while we + * were soft-disabled */ - hard_irq_disable(); - if (!lazy_irq_pending()) + if (prep_irq_for_idle()) { cede_processor(); +#ifdef CONFIG_TRACE_IRQFLAGS + /* Ensure that H_CEDE returns with IRQs on */ + if (WARN_ON(!(mfmsr() & MSR_EE))) + __hard_irq_enable(); +#endif + } } static int dedicated_cede_loop(struct cpuidle_device *dev, diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 0f3ab06d2222..eab3492a45c5 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -971,7 +971,7 @@ static int cpu_cmd(void) /* print cpus waiting or in xmon */ printf("cpus stopped:"); count = 0; - for (cpu = 0; cpu < NR_CPUS; ++cpu) { + for_each_possible_cpu(cpu) { if (cpumask_test_cpu(cpu, &cpus_in_xmon)) { if (count == 0) printf(" %x", cpu); diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c index 9092ce8aa6b4..f8b74ca83b92 100644 --- a/arch/tile/kernel/backtrace.c +++ b/arch/tile/kernel/backtrace.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/string.h> +#include <asm/byteorder.h> #include <asm/backtrace.h> #include <asm/tile-desc.h> #include <arch/abi.h> @@ -336,8 +337,12 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, bytes_to_prefetch / sizeof(tile_bundle_bits); } - /* Decode the next bundle. */ - bundle.bits = prefetched_bundles[next_bundle++]; + /* + * Decode the next bundle. + * TILE always stores instruction bundles in little-endian + * mode, even when the chip is running in big-endian mode. + */ + bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]); bundle.num_insns = parse_insn_tile(bundle.bits, pc, bundle.insns); num_info_ops = bt_get_info_ops(&bundle, info_operands); diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index be3cea4407ff..57e168e27b5b 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3934,6 +3934,9 @@ static void kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm, { struct kvm_mmu_page *page; + if (list_empty(&kvm->arch.active_mmu_pages)) + return; + page = container_of(kvm->arch.active_mmu_pages.prev, struct kvm_mmu_page, link); kvm_mmu_prepare_zap_page(kvm, page, invalid_list); diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 9b306e550e3f..2c8d6a3d250a 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -277,7 +277,7 @@ void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs) /* Don't leak any random bits. */ - memset(elfregs, 0, sizeof (elfregs)); + memset(elfregs, 0, sizeof(*elfregs)); /* Note: PS.EXCM is not set while user task is running; its * being set in regs->ps is for exception handling convenience. |