diff options
Diffstat (limited to 'arch/x86/kernel')
-rw-r--r-- | arch/x86/kernel/acpi/boot.c | 12 | ||||
-rw-r--r-- | arch/x86/kernel/apic/Makefile | 3 | ||||
-rw-r--r-- | arch/x86/kernel/apic/apic.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/apic/es7000_32.c | 738 | ||||
-rw-r--r-- | arch/x86/kernel/apic/numaq_32.c | 524 | ||||
-rw-r--r-- | arch/x86/kernel/apic/summit_32.c | 550 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/intel.c | 4 | ||||
-rw-r--r-- | arch/x86/kernel/setup.c | 1 |
8 files changed, 0 insertions, 1833 deletions
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8e61d23b8f64..86281ffb96d6 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -903,10 +903,6 @@ static int __init acpi_parse_madt_lapic_entries(void) #ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 -#ifdef CONFIG_X86_ES7000 -extern int es7000_plat; -#endif - void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { int ioapic; @@ -956,14 +952,6 @@ void __init mp_config_acpi_legacy_irqs(void) set_bit(MP_ISA_BUS, mp_bus_not_pci); pr_debug("Bus #%d is ISA\n", MP_ISA_BUS); -#ifdef CONFIG_X86_ES7000 - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; -#endif - /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 0ae0323b1f9c..dcb5b15401ce 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -18,10 +18,7 @@ obj-y += apic_flat_64.o endif # APIC probe will depend on the listing order here -obj-$(CONFIG_X86_NUMAQ) += numaq_32.o -obj-$(CONFIG_X86_SUMMIT) += summit_32.o obj-$(CONFIG_X86_BIGSMP) += bigsmp_32.o -obj-$(CONFIG_X86_ES7000) += es7000_32.o # For 32bit, probe_32 need to be listed last obj-$(CONFIG_X86_LOCAL_APIC) += probe_$(BITS).o diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 53e20531470e..481ae38f6a44 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2136,7 +2136,6 @@ int generic_processor_info(int apicid, int version) * * - arch/x86/kernel/mpparse.c: MP_processor_info() * - arch/x86/mm/amdtopology.c: amd_numa_init() - * - arch/x86/platform/visws/visws_quirks.c: MP_processor_info() * * This function is executed with the modified * boot_cpu_physical_apicid. So, disabled_cpu_apicid kernel diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c deleted file mode 100644 index 6f8f8b348a39..000000000000 --- a/arch/x86/kernel/apic/es7000_32.c +++ /dev/null @@ -1,738 +0,0 @@ -/* - * Written by: Garry Forsgren, Unisys Corporation - * Natalie Protasevich, Unisys Corporation - * - * This file contains the code to configure and interface - * with Unisys ES7000 series hardware system manager. - * - * Copyright (c) 2003 Unisys Corporation. - * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar - * - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Contact information: Unisys Corporation, Township Line & Union Meeting - * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or: - * - * http://www.unisys.com - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/notifier.h> -#include <linux/spinlock.h> -#include <linux/cpumask.h> -#include <linux/threads.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/acpi.h> -#include <linux/init.h> -#include <linux/gfp.h> -#include <linux/nmi.h> -#include <linux/smp.h> -#include <linux/io.h> - -#include <asm/apicdef.h> -#include <linux/atomic.h> -#include <asm/fixmap.h> -#include <asm/mpspec.h> -#include <asm/setup.h> -#include <asm/apic.h> -#include <asm/ipi.h> - -/* - * ES7000 chipsets - */ - -#define NON_UNISYS 0 -#define ES7000_CLASSIC 1 -#define ES7000_ZORRO 2 - -#define MIP_REG 1 -#define MIP_PSAI_REG 4 - -#define MIP_BUSY 1 -#define MIP_SPIN 0xf0000 -#define MIP_VALID 0x0100000000000000ULL -#define MIP_SW_APIC 0x1020b - -#define MIP_PORT(val) ((val >> 32) & 0xffff) - -#define MIP_RD_LO(val) (val & 0xffffffff) - -struct mip_reg { - unsigned long long off_0x00; - unsigned long long off_0x08; - unsigned long long off_0x10; - unsigned long long off_0x18; - unsigned long long off_0x20; - unsigned long long off_0x28; - unsigned long long off_0x30; - unsigned long long off_0x38; -}; - -struct mip_reg_info { - unsigned long long mip_info; - unsigned long long delivery_info; - unsigned long long host_reg; - unsigned long long mip_reg; -}; - -struct psai { - unsigned long long entry_type; - unsigned long long addr; - unsigned long long bep_addr; -}; - -#ifdef CONFIG_ACPI - -struct es7000_oem_table { - struct acpi_table_header Header; - u32 OEMTableAddr; - u32 OEMTableSize; -}; - -static unsigned long oem_addrX; -static unsigned long oem_size; - -#endif - -/* - * ES7000 Globals - */ - -static volatile unsigned long *psai; -static struct mip_reg *mip_reg; -static struct mip_reg *host_reg; -static int mip_port; -static unsigned long mip_addr; -static unsigned long host_addr; - -int es7000_plat; - -/* - * GSI override for ES7000 platforms. - */ - - -static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip) -{ - unsigned long vect = 0, psaival = 0; - - if (psai == NULL) - return -1; - - vect = ((unsigned long)__pa(eip)/0x1000) << 16; - psaival = (0x1000000 | vect | cpu); - - while (*psai & 0x1000000) - ; - - *psai = psaival; - - return 0; -} - -static int es7000_apic_is_cluster(void) -{ - /* MPENTIUMIII */ - if (boot_cpu_data.x86 == 6 && - (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11)) - return 1; - - return 0; -} - -static void setup_unisys(void) -{ - /* - * Determine the generation of the ES7000 currently running. - * - * es7000_plat = 1 if the machine is a 5xx ES7000 box - * es7000_plat = 2 if the machine is a x86_64 ES7000 box - * - */ - if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2)) - es7000_plat = ES7000_ZORRO; - else - es7000_plat = ES7000_CLASSIC; -} - -/* - * Parse the OEM Table: - */ -static int parse_unisys_oem(char *oemptr) -{ - int i; - int success = 0; - unsigned char type, size; - unsigned long val; - char *tp = NULL; - struct psai *psaip = NULL; - struct mip_reg_info *mi; - struct mip_reg *host, *mip; - - tp = oemptr; - - tp += 8; - - for (i = 0; i <= 6; i++) { - type = *tp++; - size = *tp++; - tp -= 2; - switch (type) { - case MIP_REG: - mi = (struct mip_reg_info *)tp; - val = MIP_RD_LO(mi->host_reg); - host_addr = val; - host = (struct mip_reg *)val; - host_reg = __va(host); - val = MIP_RD_LO(mi->mip_reg); - mip_port = MIP_PORT(mi->mip_info); - mip_addr = val; - mip = (struct mip_reg *)val; - mip_reg = __va(mip); - pr_debug("host_reg = 0x%lx\n", - (unsigned long)host_reg); - pr_debug("mip_reg = 0x%lx\n", - (unsigned long)mip_reg); - success++; - break; - case MIP_PSAI_REG: - psaip = (struct psai *)tp; - if (tp != NULL) { - if (psaip->addr) - psai = __va(psaip->addr); - else - psai = NULL; - success++; - } - break; - default: - break; - } - tp += size; - } - - if (success < 2) - es7000_plat = NON_UNISYS; - else - setup_unisys(); - - return es7000_plat; -} - -#ifdef CONFIG_ACPI -static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) -{ - struct acpi_table_header *header = NULL; - struct es7000_oem_table *table; - acpi_size tbl_size; - acpi_status ret; - int i = 0; - - for (;;) { - ret = acpi_get_table_with_size("OEM1", i++, &header, &tbl_size); - if (!ACPI_SUCCESS(ret)) - return -1; - - if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) - break; - - early_acpi_os_unmap_memory(header, tbl_size); - } - - table = (void *)header; - - oem_addrX = table->OEMTableAddr; - oem_size = table->OEMTableSize; - - early_acpi_os_unmap_memory(header, tbl_size); - - *oem_addr = (unsigned long)__acpi_map_table(oem_addrX, oem_size); - - return 0; -} - -static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr) -{ - if (!oem_addr) - return; - - __acpi_unmap_table((char *)oem_addr, oem_size); -} - -static int es7000_check_dsdt(void) -{ - struct acpi_table_header header; - - if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) && - !strncmp(header.oem_id, "UNISYS", 6)) - return 1; - return 0; -} - -static int es7000_acpi_ret; - -/* Hook from generic ACPI tables.c */ -static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - unsigned long oem_addr = 0; - int check_dsdt; - int ret = 0; - - /* check dsdt at first to avoid clear fix_map for oem_addr */ - check_dsdt = es7000_check_dsdt(); - - if (!find_unisys_acpi_oem_table(&oem_addr)) { - if (check_dsdt) { - ret = parse_unisys_oem((char *)oem_addr); - } else { - setup_unisys(); - ret = 1; - } - /* - * we need to unmap it - */ - unmap_unisys_acpi_oem_table(oem_addr); - } - - es7000_acpi_ret = ret; - - return ret && !es7000_apic_is_cluster(); -} - -static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id) -{ - int ret = es7000_acpi_ret; - - return ret && es7000_apic_is_cluster(); -} - -#else /* !CONFIG_ACPI: */ -static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - return 0; -} - -static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id) -{ - return 0; -} -#endif /* !CONFIG_ACPI */ - -static void es7000_spin(int n) -{ - int i = 0; - - while (i++ < n) - rep_nop(); -} - -static int es7000_mip_write(struct mip_reg *mip_reg) -{ - int status = 0; - int spin; - - spin = MIP_SPIN; - while ((host_reg->off_0x38 & MIP_VALID) != 0) { - if (--spin <= 0) { - WARN(1, "Timeout waiting for Host Valid Flag\n"); - return -1; - } - es7000_spin(MIP_SPIN); - } - - memcpy(host_reg, mip_reg, sizeof(struct mip_reg)); - outb(1, mip_port); - - spin = MIP_SPIN; - - while ((mip_reg->off_0x38 & MIP_VALID) == 0) { - if (--spin <= 0) { - WARN(1, "Timeout waiting for MIP Valid Flag\n"); - return -1; - } - es7000_spin(MIP_SPIN); - } - - status = (mip_reg->off_0x00 & 0xffff0000000000ULL) >> 48; - mip_reg->off_0x38 &= ~MIP_VALID; - - return status; -} - -static void es7000_enable_apic_mode(void) -{ - struct mip_reg es7000_mip_reg; - int mip_status; - - if (!es7000_plat) - return; - - pr_info("Enabling APIC mode.\n"); - memset(&es7000_mip_reg, 0, sizeof(struct mip_reg)); - es7000_mip_reg.off_0x00 = MIP_SW_APIC; - es7000_mip_reg.off_0x38 = MIP_VALID; - - while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) - WARN(1, "Command failed, status = %x\n", mip_status); -} - -static unsigned int es7000_get_apic_id(unsigned long x) -{ - return (x >> 24) & 0xFF; -} - -static void es7000_send_IPI_mask(const struct cpumask *mask, int vector) -{ - default_send_IPI_mask_sequence_phys(mask, vector); -} - -static void es7000_send_IPI_allbutself(int vector) -{ - default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector); -} - -static void es7000_send_IPI_all(int vector) -{ - es7000_send_IPI_mask(cpu_online_mask, vector); -} - -static int es7000_apic_id_registered(void) -{ - return 1; -} - -static const struct cpumask *target_cpus_cluster(void) -{ - return cpu_all_mask; -} - -static const struct cpumask *es7000_target_cpus(void) -{ - return cpumask_of(smp_processor_id()); -} - -static unsigned long es7000_check_apicid_used(physid_mask_t *map, int apicid) -{ - return 0; -} - -static unsigned long es7000_check_apicid_present(int bit) -{ - return physid_isset(bit, phys_cpu_present_map); -} - -static int es7000_early_logical_apicid(int cpu) -{ - /* on es7000, logical apicid is the same as physical */ - return early_per_cpu(x86_bios_cpu_apicid, cpu); -} - -static unsigned long calculate_ldr(int cpu) -{ - unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu); - - return SET_APIC_LOGICAL_ID(id); -} - -/* - * Set up the logical destination ID. - * - * Intel recommends to set DFR, LdR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ -static void es7000_init_apic_ldr_cluster(void) -{ - unsigned long val; - int cpu = smp_processor_id(); - - apic_write(APIC_DFR, APIC_DFR_CLUSTER); - val = calculate_ldr(cpu); - apic_write(APIC_LDR, val); -} - -static void es7000_init_apic_ldr(void) -{ - unsigned long val; - int cpu = smp_processor_id(); - - apic_write(APIC_DFR, APIC_DFR_FLAT); - val = calculate_ldr(cpu); - apic_write(APIC_LDR, val); -} - -static void es7000_setup_apic_routing(void) -{ - int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id()); - - pr_info("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", - (apic_version[apic] == 0x14) ? - "Physical Cluster" : "Logical Cluster", - nr_ioapics, cpumask_bits(es7000_target_cpus())[0]); -} - -static int es7000_cpu_present_to_apicid(int mps_cpu) -{ - if (!mps_cpu) - return boot_cpu_physical_apicid; - else if (mps_cpu < nr_cpu_ids) - return per_cpu(x86_bios_cpu_apicid, mps_cpu); - else - return BAD_APICID; -} - -static int cpu_id; - -static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap) -{ - physid_set_mask_of_physid(cpu_id, retmap); - ++cpu_id; -} - -static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) -{ - /* For clustered we don't have a good way to do this yet - hack */ - physids_promote(0xFFL, retmap); -} - -static int es7000_check_phys_apicid_present(int cpu_physical_apicid) -{ - boot_cpu_physical_apicid = read_apic_id(); - return 1; -} - -static inline int -es7000_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id) -{ - unsigned int round = 0; - unsigned int cpu, uninitialized_var(apicid); - - /* - * The cpus in the mask must all be on the apic cluster. - */ - for_each_cpu_and(cpu, cpumask, cpu_online_mask) { - int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - - if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { - WARN(1, "Not a valid mask!"); - - return -EINVAL; - } - apicid |= new_apicid; - round++; - } - if (!round) - return -EINVAL; - *dest_id = apicid; - return 0; -} - -static int -es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask, - const struct cpumask *andmask, - unsigned int *apicid) -{ - cpumask_var_t cpumask; - *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); - - if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) - return 0; - - cpumask_and(cpumask, inmask, andmask); - es7000_cpu_mask_to_apicid(cpumask, apicid); - - free_cpumask_var(cpumask); - - return 0; -} - -static int es7000_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; -} - -static int probe_es7000(void) -{ - /* probed later in mptable/ACPI hooks */ - return 0; -} - -static int es7000_mps_ret; -static int es7000_mps_oem_check(struct mpc_table *mpc, char *oem, - char *productid) -{ - int ret = 0; - - if (mpc->oemptr) { - struct mpc_oemtable *oem_table = - (struct mpc_oemtable *)mpc->oemptr; - - if (!strncmp(oem, "UNISYS", 6)) - ret = parse_unisys_oem((char *)oem_table); - } - - es7000_mps_ret = ret; - - return ret && !es7000_apic_is_cluster(); -} - -static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem, - char *productid) -{ - int ret = es7000_mps_ret; - - return ret && es7000_apic_is_cluster(); -} - -/* We've been warned by a false positive warning.Use __refdata to keep calm. */ -static struct apic __refdata apic_es7000_cluster = { - - .name = "es7000", - .probe = probe_es7000, - .acpi_madt_oem_check = es7000_acpi_madt_oem_check_cluster, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = es7000_apic_id_registered, - - .irq_delivery_mode = dest_LowestPrio, - /* logical delivery broadcast to all procs: */ - .irq_dest_mode = 1, - - .target_cpus = target_cpus_cluster, - .disable_esr = 1, - .dest_logical = 0, - .check_apicid_used = es7000_check_apicid_used, - .check_apicid_present = es7000_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = es7000_init_apic_ldr_cluster, - - .ioapic_phys_id_map = es7000_ioapic_phys_id_map, - .setup_apic_routing = es7000_setup_apic_routing, - .multi_timer_check = NULL, - .cpu_present_to_apicid = es7000_cpu_present_to_apicid, - .apicid_to_cpu_present = es7000_apicid_to_cpu_present, - .setup_portio_remap = NULL, - .check_phys_apicid_present = es7000_check_phys_apicid_present, - .enable_apic_mode = es7000_enable_apic_mode, - .phys_pkg_id = es7000_phys_pkg_id, - .mps_oem_check = es7000_mps_oem_check_cluster, - - .get_apic_id = es7000_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0xFF << 24, - - .cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and, - - .send_IPI_mask = es7000_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = es7000_send_IPI_allbutself, - .send_IPI_all = es7000_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .wakeup_secondary_cpu = wakeup_secondary_cpu_via_mip, - - .trampoline_phys_low = 0x467, - .trampoline_phys_high = 0x469, - - .wait_for_init_deassert = false, - /* Nothing to do for most platforms, since cleared by the INIT cycle: */ - .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = default_inquire_remote_apic, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = es7000_early_logical_apicid, -}; - -static struct apic __refdata apic_es7000 = { - - .name = "es7000", - .probe = probe_es7000, - .acpi_madt_oem_check = es7000_acpi_madt_oem_check, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = es7000_apic_id_registered, - - .irq_delivery_mode = dest_Fixed, - /* phys delivery to target CPUs: */ - .irq_dest_mode = 0, - - .target_cpus = es7000_target_cpus, - .disable_esr = 1, - .dest_logical = 0, - .check_apicid_used = es7000_check_apicid_used, - .check_apicid_present = es7000_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = es7000_init_apic_ldr, - - .ioapic_phys_id_map = es7000_ioapic_phys_id_map, - .setup_apic_routing = es7000_setup_apic_routing, - .multi_timer_check = NULL, - .cpu_present_to_apicid = es7000_cpu_present_to_apicid, - .apicid_to_cpu_present = es7000_apicid_to_cpu_present, - .setup_portio_remap = NULL, - .check_phys_apicid_present = es7000_check_phys_apicid_present, - .enable_apic_mode = es7000_enable_apic_mode, - .phys_pkg_id = es7000_phys_pkg_id, - .mps_oem_check = es7000_mps_oem_check, - - .get_apic_id = es7000_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0xFF << 24, - - .cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and, - - .send_IPI_mask = es7000_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = es7000_send_IPI_allbutself, - .send_IPI_all = es7000_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .trampoline_phys_low = 0x467, - .trampoline_phys_high = 0x469, - - .wait_for_init_deassert = true, - /* Nothing to do for most platforms, since cleared by the INIT cycle: */ - .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = default_inquire_remote_apic, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = es7000_early_logical_apicid, -}; - -/* - * Need to check for es7000 followed by es7000_cluster, so this order - * in apic_drivers is important. - */ -apic_drivers(apic_es7000, apic_es7000_cluster); diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c deleted file mode 100644 index 030ea1c04f72..000000000000 --- a/arch/x86/kernel/apic/numaq_32.c +++ /dev/null @@ -1,524 +0,0 @@ -/* - * Written by: Patricia Gaughen, IBM Corporation - * - * Copyright (C) 2002, IBM Corp. - * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to <gone@us.ibm.com> - */ -#include <linux/nodemask.h> -#include <linux/topology.h> -#include <linux/bootmem.h> -#include <linux/memblock.h> -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <linux/kernel.h> -#include <linux/mmzone.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/numa.h> -#include <linux/smp.h> -#include <linux/io.h> -#include <linux/mm.h> - -#include <asm/processor.h> -#include <asm/fixmap.h> -#include <asm/mpspec.h> -#include <asm/numaq.h> -#include <asm/setup.h> -#include <asm/apic.h> -#include <asm/e820.h> -#include <asm/ipi.h> - -int found_numaq; - -/* - * Have to match translation table entries to main table entries by counter - * hence the mpc_record variable .... can't see a less disgusting way of - * doing this .... - */ -struct mpc_trans { - unsigned char mpc_type; - unsigned char trans_len; - unsigned char trans_type; - unsigned char trans_quad; - unsigned char trans_global; - unsigned char trans_local; - unsigned short trans_reserved; -}; - -static int mpc_record; - -static struct mpc_trans *translation_table[MAX_MPC_ENTRY]; - -int mp_bus_id_to_node[MAX_MP_BUSSES]; -int mp_bus_id_to_local[MAX_MP_BUSSES]; -int quad_local_to_mp_bus_id[NR_CPUS/4][4]; - - -static inline void numaq_register_node(int node, struct sys_cfg_data *scd) -{ - struct eachquadmem *eq = scd->eq + node; - u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20; - u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20; - int ret; - - node_set(node, numa_nodes_parsed); - ret = numa_add_memblk(node, start, end); - BUG_ON(ret < 0); -} - -/* - * Function: smp_dump_qct() - * - * Description: gets memory layout from the quad config table. This - * function also updates numa_nodes_parsed with the nodes (quads) present. - */ -static void __init smp_dump_qct(void) -{ - struct sys_cfg_data *scd; - int node; - - scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR); - - for_each_node(node) { - if (scd->quads_present31_0 & (1 << node)) - numaq_register_node(node, scd); - } -} - -void numaq_tsc_disable(void) -{ - if (!found_numaq) - return; - - if (num_online_nodes() > 1) { - printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); - setup_clear_cpu_cap(X86_FEATURE_TSC); - } -} - -static void __init numaq_tsc_init(void) -{ - numaq_tsc_disable(); -} - -static inline int generate_logical_apicid(int quad, int phys_apicid) -{ - return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1); -} - -/* x86_quirks member */ -static int mpc_apic_id(struct mpc_cpu *m) -{ - int quad = translation_table[mpc_record]->trans_quad; - int logical_apicid = generate_logical_apicid(quad, m->apicid); - - printk(KERN_DEBUG - "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n", - m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8, - (m->cpufeature & CPU_MODEL_MASK) >> 4, - m->apicver, quad, logical_apicid); - - return logical_apicid; -} - -/* x86_quirks member */ -static void mpc_oem_bus_info(struct mpc_bus *m, char *name) -{ - int quad = translation_table[mpc_record]->trans_quad; - int local = translation_table[mpc_record]->trans_local; - - mp_bus_id_to_node[m->busid] = quad; - mp_bus_id_to_local[m->busid] = local; - - printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad); -} - -/* x86_quirks member */ -static void mpc_oem_pci_bus(struct mpc_bus *m) -{ - int quad = translation_table[mpc_record]->trans_quad; - int local = translation_table[mpc_record]->trans_local; - - quad_local_to_mp_bus_id[quad][local] = m->busid; -} - -/* - * Called from mpparse code. - * mode = 0: prescan - * mode = 1: one mpc entry scanned - */ -static void numaq_mpc_record(unsigned int mode) -{ - if (!mode) - mpc_record = 0; - else - mpc_record++; -} - -static void __init MP_translation_info(struct mpc_trans *m) -{ - printk(KERN_INFO - "Translation: record %d, type %d, quad %d, global %d, local %d\n", - mpc_record, m->trans_type, m->trans_quad, m->trans_global, - m->trans_local); - - if (mpc_record >= MAX_MPC_ENTRY) - printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); - else - translation_table[mpc_record] = m; /* stash this for later */ - - if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) - node_set_online(m->trans_quad); -} - -static int __init mpf_checksum(unsigned char *mp, int len) -{ - int sum = 0; - - while (len--) - sum += *mp++; - - return sum & 0xFF; -} - -/* - * Read/parse the MPC oem tables - */ -static void __init smp_read_mpc_oem(struct mpc_table *mpc) -{ - struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr; - int count = sizeof(*oemtable); /* the header size */ - unsigned char *oemptr = ((unsigned char *)oemtable) + count; - - mpc_record = 0; - printk(KERN_INFO - "Found an OEM MPC table at %8p - parsing it...\n", oemtable); - - if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) { - printk(KERN_WARNING - "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", - oemtable->signature[0], oemtable->signature[1], - oemtable->signature[2], oemtable->signature[3]); - return; - } - - if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) { - printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); - return; - } - - while (count < oemtable->length) { - switch (*oemptr) { - case MP_TRANSLATION: - { - struct mpc_trans *m = (void *)oemptr; - - MP_translation_info(m); - oemptr += sizeof(*m); - count += sizeof(*m); - ++mpc_record; - break; - } - default: - printk(KERN_WARNING - "Unrecognised OEM table entry type! - %d\n", - (int)*oemptr); - return; - } - } -} - -static __init void early_check_numaq(void) -{ - /* - * get boot-time SMP configuration: - */ - if (smp_found_config) - early_get_smp_config(); - - if (found_numaq) { - x86_init.mpparse.mpc_record = numaq_mpc_record; - x86_init.mpparse.setup_ioapic_ids = x86_init_noop; - x86_init.mpparse.mpc_apic_id = mpc_apic_id; - x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem; - x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus; - x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info; - x86_init.timers.tsc_pre_init = numaq_tsc_init; - x86_init.pci.init = pci_numaq_init; - } -} - -int __init numaq_numa_init(void) -{ - early_check_numaq(); - if (!found_numaq) - return -ENOENT; - smp_dump_qct(); - - return 0; -} - -#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER) - -static inline unsigned int numaq_get_apic_id(unsigned long x) -{ - return (x >> 24) & 0x0F; -} - -static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector) -{ - default_send_IPI_mask_sequence_logical(mask, vector); -} - -static inline void numaq_send_IPI_allbutself(int vector) -{ - default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector); -} - -static inline void numaq_send_IPI_all(int vector) -{ - numaq_send_IPI_mask(cpu_online_mask, vector); -} - -#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8) -#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa) - -/* - * Because we use NMIs rather than the INIT-STARTUP sequence to - * bootstrap the CPUs, the APIC may be in a weird state. Kick it: - */ -static inline void numaq_smp_callin_clear_local_apic(void) -{ - clear_local_APIC(); -} - -static inline const struct cpumask *numaq_target_cpus(void) -{ - return cpu_all_mask; -} - -static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid) -{ - return physid_isset(apicid, *map); -} - -static inline unsigned long numaq_check_apicid_present(int bit) -{ - return physid_isset(bit, phys_cpu_present_map); -} - -static inline int numaq_apic_id_registered(void) -{ - return 1; -} - -static inline void numaq_init_apic_ldr(void) -{ - /* Already done in NUMA-Q firmware */ -} - -static inline void numaq_setup_apic_routing(void) -{ - printk(KERN_INFO - "Enabling APIC mode: NUMA-Q. Using %d I/O APICs\n", - nr_ioapics); -} - -/* - * Skip adding the timer int on secondary nodes, which causes - * a small but painful rift in the time-space continuum. - */ -static inline int numaq_multi_timer_check(int apic, int irq) -{ - return apic != 0 && irq == 0; -} - -static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) -{ - /* We don't have a good way to do this yet - hack */ - return physids_promote(0xFUL, retmap); -} - -/* - * Supporting over 60 cpus on NUMA-Q requires a locality-dependent - * cpu to APIC ID relation to properly interact with the intelligent - * mode of the cluster controller. - */ -static inline int numaq_cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < 60) - return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3)); - else - return BAD_APICID; -} - -static inline int numaq_apicid_to_node(int logical_apicid) -{ - return logical_apicid >> 4; -} - -static int numaq_numa_cpu_node(int cpu) -{ - int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - - if (logical_apicid != BAD_APICID) - return numaq_apicid_to_node(logical_apicid); - return NUMA_NO_NODE; -} - -static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap) -{ - int node = numaq_apicid_to_node(logical_apicid); - int cpu = __ffs(logical_apicid & 0xf); - - physid_set_mask_of_physid(cpu + 4*node, retmap); -} - -/* Where the IO area was mapped on multiquad, always 0 otherwise */ -void *xquad_portio; - -static inline int numaq_check_phys_apicid_present(int phys_apicid) -{ - return 1; -} - -/* - * We use physical apicids here, not logical, so just return the default - * physical broadcast to stop people from breaking us - */ -static int -numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask, - const struct cpumask *andmask, - unsigned int *apicid) -{ - *apicid = 0x0F; - return 0; -} - -/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */ -static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; -} - -static int -numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid) -{ - if (strncmp(oem, "IBM NUMA", 8)) - printk(KERN_ERR "Warning! Not a NUMA-Q system!\n"); - else - found_numaq = 1; - - return found_numaq; -} - -static int probe_numaq(void) -{ - /* already know from get_memcfg_numaq() */ - return found_numaq; -} - -static void numaq_setup_portio_remap(void) -{ - int num_quads = num_online_nodes(); - - if (num_quads <= 1) - return; - - printk(KERN_INFO - "Remapping cross-quad port I/O for %d quads\n", num_quads); - - xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD); - - printk(KERN_INFO - "xquad_portio vaddr 0x%08lx, len %08lx\n", - (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); -} - -/* Use __refdata to keep false positive warning calm. */ -static struct apic __refdata apic_numaq = { - - .name = "NUMAQ", - .probe = probe_numaq, - .acpi_madt_oem_check = NULL, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = numaq_apic_id_registered, - - .irq_delivery_mode = dest_LowestPrio, - /* physical delivery on LOCAL quad: */ - .irq_dest_mode = 0, - - .target_cpus = numaq_target_cpus, - .disable_esr = 1, - .dest_logical = APIC_DEST_LOGICAL, - .check_apicid_used = numaq_check_apicid_used, - .check_apicid_present = numaq_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = numaq_init_apic_ldr, - - .ioapic_phys_id_map = numaq_ioapic_phys_id_map, - .setup_apic_routing = numaq_setup_apic_routing, - .multi_timer_check = numaq_multi_timer_check, - .cpu_present_to_apicid = numaq_cpu_present_to_apicid, - .apicid_to_cpu_present = numaq_apicid_to_cpu_present, - .setup_portio_remap = numaq_setup_portio_remap, - .check_phys_apicid_present = numaq_check_phys_apicid_present, - .enable_apic_mode = NULL, - .phys_pkg_id = numaq_phys_pkg_id, - .mps_oem_check = numaq_mps_oem_check, - - .get_apic_id = numaq_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0x0F << 24, - - .cpu_mask_to_apicid_and = numaq_cpu_mask_to_apicid_and, - - .send_IPI_mask = numaq_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = numaq_send_IPI_allbutself, - .send_IPI_all = numaq_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .wakeup_secondary_cpu = wakeup_secondary_cpu_via_nmi, - .trampoline_phys_low = NUMAQ_TRAMPOLINE_PHYS_LOW, - .trampoline_phys_high = NUMAQ_TRAMPOLINE_PHYS_HIGH, - - /* We don't do anything here because we use NMI's to boot instead */ - .wait_for_init_deassert = false, - .smp_callin_clear_local_apic = numaq_smp_callin_clear_local_apic, - .inquire_remote_apic = NULL, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, - .x86_32_numa_cpu_node = numaq_numa_cpu_node, -}; - -apic_driver(apic_numaq); diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c deleted file mode 100644 index b656128611cd..000000000000 --- a/arch/x86/kernel/apic/summit_32.c +++ /dev/null @@ -1,550 +0,0 @@ -/* - * IBM Summit-Specific Code - * - * Written By: Matthew Dobson, IBM Corporation - * - * Copyright (c) 2003 IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to <colpatch@us.ibm.com> - * - */ - -#define pr_fmt(fmt) "summit: %s: " fmt, __func__ - -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/bios_ebda.h> - -/* - * APIC driver for the IBM "Summit" chipset. - */ -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <asm/mpspec.h> -#include <asm/apic.h> -#include <asm/smp.h> -#include <asm/fixmap.h> -#include <asm/apicdef.h> -#include <asm/ipi.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/gfp.h> -#include <linux/smp.h> - -static unsigned summit_get_apic_id(unsigned long x) -{ - return (x >> 24) & 0xFF; -} - -static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector) -{ - default_send_IPI_mask_sequence_logical(mask, vector); -} - -static void summit_send_IPI_allbutself(int vector) -{ - default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector); -} - -static void summit_send_IPI_all(int vector) -{ - summit_send_IPI_mask(cpu_online_mask, vector); -} - -#include <asm/tsc.h> - -extern int use_cyclone; - -#ifdef CONFIG_X86_SUMMIT_NUMA -static void setup_summit(void); -#else -static inline void setup_summit(void) {} -#endif - -static int summit_mps_oem_check(struct mpc_table *mpc, char *oem, - char *productid) -{ - if (!strncmp(oem, "IBM ENSW", 8) && - (!strncmp(productid, "VIGIL SMP", 9) - || !strncmp(productid, "EXA", 3) - || !strncmp(productid, "RUTHLESS SMP", 12))){ - mark_tsc_unstable("Summit based system"); - use_cyclone = 1; /*enable cyclone-timer*/ - setup_summit(); - return 1; - } - return 0; -} - -/* Hook from generic ACPI tables.c */ -static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - if (!strncmp(oem_id, "IBM", 3) && - (!strncmp(oem_table_id, "SERVIGIL", 8) - || !strncmp(oem_table_id, "EXA", 3))){ - mark_tsc_unstable("Summit based system"); - use_cyclone = 1; /*enable cyclone-timer*/ - setup_summit(); - return 1; - } - return 0; -} - -struct rio_table_hdr { - unsigned char version; /* Version number of this data structure */ - /* Version 3 adds chassis_num & WP_index */ - unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */ - unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */ -} __attribute__((packed)); - -struct scal_detail { - unsigned char node_id; /* Scalability Node ID */ - unsigned long CBAR; /* Address of 1MB register space */ - unsigned char port0node; /* Node ID port connected to: 0xFF=None */ - unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port1node; /* Node ID port connected to: 0xFF = None */ - unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port2node; /* Node ID port connected to: 0xFF = None */ - unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */ -} __attribute__((packed)); - -struct rio_detail { - unsigned char node_id; /* RIO Node ID */ - unsigned long BBAR; /* Address of 1MB register space */ - unsigned char type; /* Type of device */ - unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/ - /* For CYC: Node ID of Twister that owns this CYC */ - unsigned char port0node; /* Node ID port connected to: 0xFF=None */ - unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port1node; /* Node ID port connected to: 0xFF=None */ - unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */ - /* For CYC: 0 */ - unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */ - /* = 0 : the XAPIC is not used, ie:*/ - /* ints fwded to another XAPIC */ - /* Bits1:7 Reserved */ - /* For CYC: Bits0:7 Reserved */ - unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */ - /* lower slot numbers/PCI bus numbers */ - /* For CYC: No meaning */ - unsigned char chassis_num; /* 1 based Chassis number */ - /* For LookOut WPEGs this field indicates the */ - /* Expansion Chassis #, enumerated from Boot */ - /* Node WPEG external port, then Boot Node CYC */ - /* external port, then Next Vigil chassis WPEG */ - /* external port, etc. */ - /* Shared Lookouts have only 1 chassis number (the */ - /* first one assigned) */ -} __attribute__((packed)); - - -typedef enum { - CompatTwister = 0, /* Compatibility Twister */ - AltTwister = 1, /* Alternate Twister of internal 8-way */ - CompatCyclone = 2, /* Compatibility Cyclone */ - AltCyclone = 3, /* Alternate Cyclone of internal 8-way */ - CompatWPEG = 4, /* Compatibility WPEG */ - AltWPEG = 5, /* Second Planar WPEG */ - LookOutAWPEG = 6, /* LookOut WPEG */ - LookOutBWPEG = 7, /* LookOut WPEG */ -} node_type; - -static inline int is_WPEG(struct rio_detail *rio){ - return (rio->type == CompatWPEG || rio->type == AltWPEG || - rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); -} - -#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER) - -static const struct cpumask *summit_target_cpus(void) -{ - /* CPU_MASK_ALL (0xff) has undefined behaviour with - * dest_LowestPrio mode logical clustered apic interrupt routing - * Just start on cpu 0. IRQ balancing will spread load - */ - return cpumask_of(0); -} - -static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid) -{ - return 0; -} - -/* we don't use the phys_cpu_present_map to indicate apicid presence */ -static unsigned long summit_check_apicid_present(int bit) -{ - return 1; -} - -static int summit_early_logical_apicid(int cpu) -{ - int count = 0; - u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu); - u8 my_cluster = APIC_CLUSTER(my_id); -#ifdef CONFIG_SMP - u8 lid; - int i; - - /* Create logical APIC IDs by counting CPUs already in cluster. */ - for (count = 0, i = nr_cpu_ids; --i >= 0; ) { - lid = early_per_cpu(x86_cpu_to_logical_apicid, i); - if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster) - ++count; - } -#endif - /* We only have a 4 wide bitmap in cluster mode. If a deranged - * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ - BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); - return my_cluster | (1UL << count); -} - -static void summit_init_apic_ldr(void) -{ - int cpu = smp_processor_id(); - unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - unsigned long val; - - apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE); - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - val |= SET_APIC_LOGICAL_ID(id); - apic_write(APIC_LDR, val); -} - -static int summit_apic_id_registered(void) -{ - return 1; -} - -static void summit_setup_apic_routing(void) -{ - pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n", - nr_ioapics); -} - -static int summit_cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < nr_cpu_ids) - return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); - else - return BAD_APICID; -} - -static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap) -{ - /* For clustered we don't have a good way to do this yet - hack */ - physids_promote(0x0FL, retmap); -} - -static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap) -{ - physid_set_mask_of_physid(0, retmap); -} - -static int summit_check_phys_apicid_present(int physical_apicid) -{ - return 1; -} - -static inline int -summit_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id) -{ - unsigned int round = 0; - unsigned int cpu, apicid = 0; - - /* - * The cpus in the mask must all be on the apic cluster. - */ - for_each_cpu_and(cpu, cpumask, cpu_online_mask) { - int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - - if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { - pr_err("Not a valid mask!\n"); - return -EINVAL; - } - apicid |= new_apicid; - round++; - } - if (!round) - return -EINVAL; - *dest_id = apicid; - return 0; -} - -static int -summit_cpu_mask_to_apicid_and(const struct cpumask *inmask, - const struct cpumask *andmask, - unsigned int *apicid) -{ - cpumask_var_t cpumask; - *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); - - if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) - return 0; - - cpumask_and(cpumask, inmask, andmask); - summit_cpu_mask_to_apicid(cpumask, apicid); - - free_cpumask_var(cpumask); - - return 0; -} - -/* - * cpuid returns the value latched in the HW at reset, not the APIC ID - * register's value. For any box whose BIOS changes APIC IDs, like - * clustered APIC systems, we must use hard_smp_processor_id. - * - * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. - */ -static int summit_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return hard_smp_processor_id() >> index_msb; -} - -static int probe_summit(void) -{ - /* probed later in mptable/ACPI hooks */ - return 0; -} - -#ifdef CONFIG_X86_SUMMIT_NUMA -static struct rio_table_hdr *rio_table_hdr; -static struct scal_detail *scal_devs[MAX_NUMNODES]; -static struct rio_detail *rio_devs[MAX_NUMNODES*4]; - -#ifndef CONFIG_X86_NUMAQ -static int mp_bus_id_to_node[MAX_MP_BUSSES]; -#endif - -static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) -{ - int twister = 0, node = 0; - int i, bus, num_buses; - - for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { - if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) { - twister = rio_devs[i]->owner_id; - break; - } - } - if (i == rio_table_hdr->num_rio_dev) { - pr_err("Couldn't find owner Cyclone for Winnipeg!\n"); - return last_bus; - } - - for (i = 0; i < rio_table_hdr->num_scal_dev; i++) { - if (scal_devs[i]->node_id == twister) { - node = scal_devs[i]->node_id; - break; - } - } - if (i == rio_table_hdr->num_scal_dev) { - pr_err("Couldn't find owner Twister for Cyclone!\n"); - return last_bus; - } - - switch (rio_devs[wpeg_num]->type) { - case CompatWPEG: - /* - * The Compatibility Winnipeg controls the 2 legacy buses, - * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case - * a PCI-PCI bridge card is used in either slot: total 5 buses. - */ - num_buses = 5; - break; - case AltWPEG: - /* - * The Alternate Winnipeg controls the 2 133MHz buses [1 slot - * each], their 2 "extra" buses, the 100MHz bus [2 slots] and - * the "extra" buses for each of those slots: total 7 buses. - */ - num_buses = 7; - break; - case LookOutAWPEG: - case LookOutBWPEG: - /* - * A Lookout Winnipeg controls 3 100MHz buses [2 slots each] - * & the "extra" buses for each of those slots: total 9 buses. - */ - num_buses = 9; - break; - default: - pr_info("Unsupported Winnipeg type!\n"); - return last_bus; - } - - for (bus = last_bus; bus < last_bus + num_buses; bus++) - mp_bus_id_to_node[bus] = node; - return bus; -} - -static int build_detail_arrays(void) -{ - unsigned long ptr; - int i, scal_detail_size, rio_detail_size; - - if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) { - pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n", - MAX_NUMNODES, rio_table_hdr->num_scal_dev); - return 0; - } - - switch (rio_table_hdr->version) { - default: - pr_warn("Invalid Rio Grande Table Version: %d\n", - rio_table_hdr->version); - return 0; - case 2: - scal_detail_size = 11; - rio_detail_size = 13; - break; - case 3: - scal_detail_size = 12; - rio_detail_size = 15; - break; - } - - ptr = (unsigned long)rio_table_hdr + 3; - for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size) - scal_devs[i] = (struct scal_detail *)ptr; - - for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size) - rio_devs[i] = (struct rio_detail *)ptr; - - return 1; -} - -void setup_summit(void) -{ - unsigned long ptr; - unsigned short offset; - int i, next_wpeg, next_bus = 0; - - /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */ - ptr = get_bios_ebda(); - ptr = (unsigned long)phys_to_virt(ptr); - - rio_table_hdr = NULL; - offset = 0x180; - while (offset) { - /* The block id is stored in the 2nd word */ - if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) { - /* set the pointer past the offset & block id */ - rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4); - break; - } - /* The next offset is stored in the 1st word. 0 means no more */ - offset = *((unsigned short *)(ptr + offset)); - } - if (!rio_table_hdr) { - pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n"); - return; - } - - if (!build_detail_arrays()) - return; - - /* The first Winnipeg we're looking for has an index of 0 */ - next_wpeg = 0; - do { - for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { - if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) { - /* It's the Winnipeg we're looking for! */ - next_bus = setup_pci_node_map_for_wpeg(i, next_bus); - next_wpeg++; - break; - } - } - /* - * If we go through all Rio devices and don't find one with - * the next index, it means we've found all the Winnipegs, - * and thus all the PCI buses. - */ - if (i == rio_table_hdr->num_rio_dev) - next_wpeg = 0; - } while (next_wpeg != 0); -} -#endif - -static struct apic apic_summit = { - - .name = "summit", - .probe = probe_summit, - .acpi_madt_oem_check = summit_acpi_madt_oem_check, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = summit_apic_id_registered, - - .irq_delivery_mode = dest_LowestPrio, - /* logical delivery broadcast to all CPUs: */ - .irq_dest_mode = 1, - - .target_cpus = summit_target_cpus, - .disable_esr = 1, - .dest_logical = APIC_DEST_LOGICAL, - .check_apicid_used = summit_check_apicid_used, - .check_apicid_present = summit_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = summit_init_apic_ldr, - - .ioapic_phys_id_map = summit_ioapic_phys_id_map, - .setup_apic_routing = summit_setup_apic_routing, - .multi_timer_check = NULL, - .cpu_present_to_apicid = summit_cpu_present_to_apicid, - .apicid_to_cpu_present = summit_apicid_to_cpu_present, - .setup_portio_remap = NULL, - .check_phys_apicid_present = summit_check_phys_apicid_present, - .enable_apic_mode = NULL, - .phys_pkg_id = summit_phys_pkg_id, - .mps_oem_check = summit_mps_oem_check, - - .get_apic_id = summit_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0xFF << 24, - - .cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and, - - .send_IPI_mask = summit_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = summit_send_IPI_allbutself, - .send_IPI_all = summit_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW, - .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, - - .wait_for_init_deassert = true, - .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = default_inquire_remote_apic, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = summit_early_logical_apicid, -}; - -apic_driver(apic_summit); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 897d6201ef10..a80029035bf2 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -274,10 +274,6 @@ static void intel_workarounds(struct cpuinfo_x86 *c) } #endif -#ifdef CONFIG_X86_NUMAQ - numaq_tsc_disable(); -#endif - intel_smp_check(c); } #else diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index fa511acff7e6..09c76d265550 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -869,7 +869,6 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); - visws_early_detect(); /* * copy kernel address range established so far and switch |