summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel')
-rw-r--r--arch/x86/kernel/Makefile5
-rw-r--r--arch/x86/kernel/apb_timer.c60
-rw-r--r--arch/x86/kernel/apic/apic.c69
-rw-r--r--arch/x86/kernel/devicetree.c441
-rw-r--r--arch/x86/kernel/e820.c8
-rw-r--r--arch/x86/kernel/head_32.S2
-rw-r--r--arch/x86/kernel/irq.c9
-rw-r--r--arch/x86/kernel/irqinit.c9
-rw-r--r--arch/x86/kernel/rtc.c3
-rw-r--r--arch/x86/kernel/setup.c25
-rw-r--r--arch/x86/kernel/x86_init.c1
11 files changed, 507 insertions, 125 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 34244b2cd880..62445ba2f8a8 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -66,9 +66,9 @@ obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_SMP) += smpboot.o tsc_sync.o
+obj-$(CONFIG_SMP) += smpboot.o
+obj-$(CONFIG_SMP) += tsc_sync.o
obj-$(CONFIG_SMP) += setup_percpu.o
-obj-$(CONFIG_X86_64_SMP) += tsc_sync.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
obj-y += apic/
@@ -109,6 +109,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
+obj-$(CONFIG_OF) += devicetree.o
###
# 64 bit specific files
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 51d4e1663066..1293c709ee85 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -508,64 +508,12 @@ static int apbt_next_event(unsigned long delta,
return 0;
}
-/*
- * APB timer clock is not in sync with pclk on Langwell, which translates to
- * unreliable read value caused by sampling error. the error does not add up
- * overtime and only happens when sampling a 0 as a 1 by mistake. so the time
- * would go backwards. the following code is trying to prevent time traveling
- * backwards. little bit paranoid.
- */
static cycle_t apbt_read_clocksource(struct clocksource *cs)
{
- unsigned long t0, t1, t2;
- static unsigned long last_read;
-
-bad_count:
- t1 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- t2 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- if (unlikely(t1 < t2)) {
- pr_debug("APBT: read current count error %lx:%lx:%lx\n",
- t1, t2, t2 - t1);
- goto bad_count;
- }
- /*
- * check against cached last read, makes sure time does not go back.
- * it could be a normal rollover but we will do tripple check anyway
- */
- if (unlikely(t2 > last_read)) {
- /* check if we have a normal rollover */
- unsigned long raw_intr_status =
- apbt_readl_reg(APBTMRS_RAW_INT_STATUS);
- /*
- * cs timer interrupt is masked but raw intr bit is set if
- * rollover occurs. then we read EOI reg to clear it.
- */
- if (raw_intr_status & (1 << phy_cs_timer_id)) {
- apbt_readl(phy_cs_timer_id, APBTMR_N_EOI);
- goto out;
- }
- pr_debug("APB CS going back %lx:%lx:%lx ",
- t2, last_read, t2 - last_read);
-bad_count_x3:
- pr_debug("triple check enforced\n");
- t0 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- udelay(1);
- t1 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- udelay(1);
- t2 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- if ((t2 > t1) || (t1 > t0)) {
- printk(KERN_ERR "Error: APB CS tripple check failed\n");
- goto bad_count_x3;
- }
- }
-out:
- last_read = t2;
- return (cycle_t)~t2;
+ unsigned long current_count;
+
+ current_count = apbt_readl(phy_cs_timer_id, APBTMR_N_CURRENT_VALUE);
+ return (cycle_t)~current_count;
}
static int apbt_clocksource_register(void)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 562a8325cc1c..966673f44141 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -93,7 +93,7 @@ DEFINE_EARLY_PER_CPU(int, x86_cpu_to_logical_apicid, BAD_APICID);
*
* +1=force-enable
*/
-static int force_enable_local_apic;
+static int force_enable_local_apic __initdata;
/*
* APIC command line parameters
*/
@@ -163,7 +163,7 @@ early_param("nox2apic", setup_nox2apic);
unsigned long mp_lapic_addr;
int disable_apic;
/* Disable local APIC timer from the kernel commandline or via dmi quirk */
-static int disable_apic_timer __cpuinitdata;
+static int disable_apic_timer __initdata;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
@@ -187,29 +187,8 @@ static struct resource lapic_resource = {
static unsigned int calibration_result;
-static int lapic_next_event(unsigned long delta,
- struct clock_event_device *evt);
-static void lapic_timer_setup(enum clock_event_mode mode,
- struct clock_event_device *evt);
-static void lapic_timer_broadcast(const struct cpumask *mask);
static void apic_pm_activate(void);
-/*
- * The local apic timer can be used for any function which is CPU local.
- */
-static struct clock_event_device lapic_clockevent = {
- .name = "lapic",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
- | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
- .shift = 32,
- .set_mode = lapic_timer_setup,
- .set_next_event = lapic_next_event,
- .broadcast = lapic_timer_broadcast,
- .rating = 100,
- .irq = -1,
-};
-static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
-
static unsigned long apic_phys;
/*
@@ -248,7 +227,7 @@ static int modern_apic(void)
* right after this call apic become NOOP driven
* so apic->write/read doesn't do anything
*/
-void apic_disable(void)
+static void __init apic_disable(void)
{
pr_info("APIC: switched to apic NOOP\n");
apic = &apic_noop;
@@ -292,23 +271,6 @@ u64 native_apic_icr_read(void)
return icr1 | ((u64)icr2 << 32);
}
-/**
- * enable_NMI_through_LVT0 - enable NMI through local vector table 0
- */
-void __cpuinit enable_NMI_through_LVT0(void)
-{
- unsigned int v;
-
- /* unmask and set to NMI */
- v = APIC_DM_NMI;
-
- /* Level triggered for 82489DX (32bit mode) */
- if (!lapic_is_integrated())
- v |= APIC_LVT_LEVEL_TRIGGER;
-
- apic_write(APIC_LVT0, v);
-}
-
#ifdef CONFIG_X86_32
/**
* get_physical_broadcast - Get number of physical broadcast IDs
@@ -518,6 +480,23 @@ static void lapic_timer_broadcast(const struct cpumask *mask)
#endif
}
+
+/*
+ * The local apic timer can be used for any function which is CPU local.
+ */
+static struct clock_event_device lapic_clockevent = {
+ .name = "lapic",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
+ | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
+ .shift = 32,
+ .set_mode = lapic_timer_setup,
+ .set_next_event = lapic_next_event,
+ .broadcast = lapic_timer_broadcast,
+ .rating = 100,
+ .irq = -1,
+};
+static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
+
/*
* Setup the local APIC timer for this CPU. Copy the initialized values
* of the boot CPU and register the clock event in the framework.
@@ -1560,7 +1539,7 @@ static int __init detect_init_APIC(void)
}
#else
-static int apic_verify(void)
+static int __init apic_verify(void)
{
u32 features, h, l;
@@ -1585,7 +1564,7 @@ static int apic_verify(void)
return 0;
}
-int apic_force_enable(void)
+int __init apic_force_enable(unsigned long addr)
{
u32 h, l;
@@ -1601,7 +1580,7 @@ int apic_force_enable(void)
if (!(l & MSR_IA32_APICBASE_ENABLE)) {
pr_info("Local APIC disabled by BIOS -- reenabling.\n");
l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | addr;
wrmsr(MSR_IA32_APICBASE, l, h);
enabled_via_apicbase = 1;
}
@@ -1642,7 +1621,7 @@ static int __init detect_init_APIC(void)
"you can enable it with \"lapic\"\n");
return -1;
}
- if (apic_force_enable())
+ if (apic_force_enable(APIC_DEFAULT_PHYS_BASE))
return -1;
} else {
if (apic_verify())
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
new file mode 100644
index 000000000000..7a8cebc9ff29
--- /dev/null
+++ b/arch/x86/kernel/devicetree.c
@@ -0,0 +1,441 @@
+/*
+ * Architecture specific OF callbacks.
+ */
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/of_pci.h>
+
+#include <asm/hpet.h>
+#include <asm/irq_controller.h>
+#include <asm/apic.h>
+#include <asm/pci_x86.h>
+
+__initdata u64 initial_dtb;
+char __initdata cmd_line[COMMAND_LINE_SIZE];
+static LIST_HEAD(irq_domains);
+static DEFINE_RAW_SPINLOCK(big_irq_lock);
+
+int __initdata of_ioapic;
+
+#ifdef CONFIG_X86_IO_APIC
+static void add_interrupt_host(struct irq_domain *ih)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&big_irq_lock, flags);
+ list_add(&ih->l, &irq_domains);
+ raw_spin_unlock_irqrestore(&big_irq_lock, flags);
+}
+#endif
+
+static struct irq_domain *get_ih_from_node(struct device_node *controller)
+{
+ struct irq_domain *ih, *found = NULL;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&big_irq_lock, flags);
+ list_for_each_entry(ih, &irq_domains, l) {
+ if (ih->controller == controller) {
+ found = ih;
+ break;
+ }
+ }
+ raw_spin_unlock_irqrestore(&big_irq_lock, flags);
+ return found;
+}
+
+unsigned int irq_create_of_mapping(struct device_node *controller,
+ const u32 *intspec, unsigned int intsize)
+{
+ struct irq_domain *ih;
+ u32 virq, type;
+ int ret;
+
+ ih = get_ih_from_node(controller);
+ if (!ih)
+ return 0;
+ ret = ih->xlate(ih, intspec, intsize, &virq, &type);
+ if (ret)
+ return ret;
+ if (type == IRQ_TYPE_NONE)
+ return virq;
+ /* set the mask if it is different from current */
+ if (type == (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK))
+ set_irq_type(virq, type);
+ return virq;
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ /*
+ * The ioport address can be directly used by inX / outX
+ */
+ BUG_ON(address >= (1 << 16));
+ return (unsigned long)address;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
+void __init early_init_dt_scan_chosen_arch(unsigned long node)
+{
+ BUG();
+}
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+ BUG();
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+ return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
+}
+
+void __init add_dtb(u64 data)
+{
+ initial_dtb = data + offsetof(struct setup_data, data);
+}
+
+/*
+ * CE4100 ids. Will be moved to machine_device_initcall() once we have it.
+ */
+static struct of_device_id __initdata ce4100_ids[] = {
+ { .compatible = "intel,ce4100-cp", },
+ { .compatible = "isa", },
+ { .compatible = "pci", },
+ {},
+};
+
+static int __init add_bus_probe(void)
+{
+ if (!of_have_populated_dt())
+ return 0;
+
+ return of_platform_bus_probe(NULL, ce4100_ids, NULL);
+}
+module_init(add_bus_probe);
+
+#ifdef CONFIG_PCI
+static int x86_of_pci_irq_enable(struct pci_dev *dev)
+{
+ struct of_irq oirq;
+ u32 virq;
+ int ret;
+ u8 pin;
+
+ ret = pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (ret)
+ return ret;
+ if (!pin)
+ return 0;
+
+ ret = of_irq_map_pci(dev, &oirq);
+ if (ret)
+ return ret;
+
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ if (virq == 0)
+ return -EINVAL;
+ dev->irq = virq;
+ return 0;
+}
+
+static void x86_of_pci_irq_disable(struct pci_dev *dev)
+{
+}
+
+void __cpuinit x86_of_pci_init(void)
+{
+ struct device_node *np;
+
+ pcibios_enable_irq = x86_of_pci_irq_enable;
+ pcibios_disable_irq = x86_of_pci_irq_disable;
+
+ for_each_node_by_type(np, "pci") {
+ const void *prop;
+ struct pci_bus *bus;
+ unsigned int bus_min;
+ struct device_node *child;
+
+ prop = of_get_property(np, "bus-range", NULL);
+ if (!prop)
+ continue;
+ bus_min = be32_to_cpup(prop);
+
+ bus = pci_find_bus(0, bus_min);
+ if (!bus) {
+ printk(KERN_ERR "Can't find a node for bus %s.\n",
+ np->full_name);
+ continue;
+ }
+
+ if (bus->self)
+ bus->self->dev.of_node = np;
+ else
+ bus->dev.of_node = np;
+
+ for_each_child_of_node(np, child) {
+ struct pci_dev *dev;
+ u32 devfn;
+
+ prop = of_get_property(child, "reg", NULL);
+ if (!prop)
+ continue;
+
+ devfn = (be32_to_cpup(prop) >> 8) & 0xff;
+ dev = pci_get_slot(bus, devfn);
+ if (!dev)
+ continue;
+ dev->dev.of_node = child;
+ pci_dev_put(dev);
+ }
+ }
+}
+#endif
+
+static void __init dtb_setup_hpet(void)
+{
+#ifdef CONFIG_HPET_TIMER
+ struct device_node *dn;
+ struct resource r;
+ int ret;
+
+ dn = of_find_compatible_node(NULL, NULL, "intel,ce4100-hpet");
+ if (!dn)
+ return;
+ ret = of_address_to_resource(dn, 0, &r);
+ if (ret) {
+ WARN_ON(1);
+ return;
+ }
+ hpet_address = r.start;
+#endif
+}
+
+static void __init dtb_lapic_setup(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ struct device_node *dn;
+ struct resource r;
+ int ret;
+
+ dn = of_find_compatible_node(NULL, NULL, "intel,ce4100-lapic");
+ if (!dn)
+ return;
+
+ ret = of_address_to_resource(dn, 0, &r);
+ if (WARN_ON(ret))
+ return;
+
+ /* Did the boot loader setup the local APIC ? */
+ if (!cpu_has_apic) {
+ if (apic_force_enable(r.start))
+ return;
+ }
+ smp_found_config = 1;
+ pic_mode = 1;
+ register_lapic_address(r.start);
+ generic_processor_info(boot_cpu_physical_apicid,
+ GET_APIC_VERSION(apic_read(APIC_LVR)));
+#endif
+}
+
+#ifdef CONFIG_X86_IO_APIC
+static unsigned int ioapic_id;
+
+static void __init dtb_add_ioapic(struct device_node *dn)
+{
+ struct resource r;
+ int ret;
+
+ ret = of_address_to_resource(dn, 0, &r);
+ if (ret) {
+ printk(KERN_ERR "Can't obtain address from node %s.\n",
+ dn->full_name);
+ return;
+ }
+ mp_register_ioapic(++ioapic_id, r.start, gsi_top);
+}
+
+static void __init dtb_ioapic_setup(void)
+{
+ struct device_node *dn;
+
+ for_each_compatible_node(dn, NULL, "intel,ce4100-ioapic")
+ dtb_add_ioapic(dn);
+
+ if (nr_ioapics) {
+ of_ioapic = 1;
+ return;
+ }
+ printk(KERN_ERR "Error: No information about IO-APIC in OF.\n");
+}
+#else
+static void __init dtb_ioapic_setup(void) {}
+#endif
+
+static void __init dtb_apic_setup(void)
+{
+ dtb_lapic_setup();
+ dtb_ioapic_setup();
+}
+
+#ifdef CONFIG_OF_FLATTREE
+static void __init x86_flattree_get_config(void)
+{
+ u32 size, map_len;
+ void *new_dtb;
+
+ if (!initial_dtb)
+ return;
+
+ map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK),
+ (u64)sizeof(struct boot_param_header));
+
+ initial_boot_params = early_memremap(initial_dtb, map_len);
+ size = be32_to_cpu(initial_boot_params->totalsize);
+ if (map_len < size) {
+ early_iounmap(initial_boot_params, map_len);
+ initial_boot_params = early_memremap(initial_dtb, size);
+ map_len = size;
+ }
+
+ new_dtb = alloc_bootmem(size);
+ memcpy(new_dtb, initial_boot_params, size);
+ early_iounmap(initial_boot_params, map_len);
+
+ initial_boot_params = new_dtb;
+
+ /* root level address cells */
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+
+ unflatten_device_tree();
+}
+#else
+static inline void x86_flattree_get_config(void) { }
+#endif
+
+void __init x86_dtb_init(void)
+{
+ x86_flattree_get_config();
+
+ if (!of_have_populated_dt())
+ return;
+
+ dtb_setup_hpet();
+ dtb_apic_setup();
+}
+
+#ifdef CONFIG_X86_IO_APIC
+
+struct of_ioapic_type {
+ u32 out_type;
+ u32 trigger;
+ u32 polarity;
+};
+
+static struct of_ioapic_type of_ioapic_type[] =
+{
+ {
+ .out_type = IRQ_TYPE_EDGE_RISING,
+ .trigger = IOAPIC_EDGE,
+ .polarity = 1,
+ },
+ {
+ .out_type = IRQ_TYPE_LEVEL_LOW,
+ .trigger = IOAPIC_LEVEL,
+ .polarity = 0,
+ },
+ {
+ .out_type = IRQ_TYPE_LEVEL_HIGH,
+ .trigger = IOAPIC_LEVEL,
+ .polarity = 1,
+ },
+ {
+ .out_type = IRQ_TYPE_EDGE_FALLING,
+ .trigger = IOAPIC_EDGE,
+ .polarity = 0,
+ },
+};
+
+static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize,
+ u32 *out_hwirq, u32 *out_type)
+{
+ struct io_apic_irq_attr attr;
+ struct of_ioapic_type *it;
+ u32 line, idx, type;
+
+ if (intsize < 2)
+ return -EINVAL;
+
+ line = *intspec;
+ idx = (u32) id->priv;
+ *out_hwirq = line + mp_gsi_routing[idx].gsi_base;
+
+ intspec++;
+ type = *intspec;
+
+ if (type >= ARRAY_SIZE(of_ioapic_type))
+ return -EINVAL;
+
+ it = of_ioapic_type + type;
+ *out_type = it->out_type;
+
+ set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity);
+
+ return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr);
+}
+
+static void __init ioapic_add_ofnode(struct device_node *np)
+{
+ struct resource r;
+ int i, ret;
+
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret) {
+ printk(KERN_ERR "Failed to obtain address for %s\n",
+ np->full_name);
+ return;
+ }
+
+ for (i = 0; i < nr_ioapics; i++) {
+ if (r.start == mp_ioapics[i].apicaddr) {
+ struct irq_domain *id;
+
+ id = kzalloc(sizeof(*id), GFP_KERNEL);
+ BUG_ON(!id);
+ id->controller = np;
+ id->xlate = ioapic_xlate;
+ id->priv = (void *)i;
+ add_interrupt_host(id);
+ return;
+ }
+ }
+ printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name);
+}
+
+void __init x86_add_irq_domains(void)
+{
+ struct device_node *dp;
+
+ if (!of_have_populated_dt())
+ return;
+
+ for_each_node_with_property(dp, "interrupt-controller") {
+ if (of_device_is_compatible(dp, "intel,ce4100-ioapic"))
+ ioapic_add_ofnode(dp);
+ }
+}
+#else
+void __init x86_add_irq_domains(void) { }
+#endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 0b5e2b546566..cdf5bfd9d4d5 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -667,21 +667,15 @@ __init void e820_setup_gap(void)
* boot_params.e820_map, others are passed via SETUP_E820_EXT node of
* linked list of struct setup_data, which is parsed here.
*/
-void __init parse_e820_ext(struct setup_data *sdata, unsigned long pa_data)
+void __init parse_e820_ext(struct setup_data *sdata)
{
- u32 map_len;
int entries;
struct e820entry *extmap;
entries = sdata->len / sizeof(struct e820entry);
- map_len = sdata->len + sizeof(struct setup_data);
- if (map_len > PAGE_SIZE)
- sdata = early_ioremap(pa_data, map_len);
extmap = (struct e820entry *)(sdata->data);
__append_e820_map(extmap, entries);
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
- if (map_len > PAGE_SIZE)
- early_iounmap(sdata, map_len);
printk(KERN_INFO "extended physical RAM map:\n");
e820_print_map("extended");
}
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 187aa63b321f..ce0be7cd085e 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -137,7 +137,7 @@ ENTRY(startup_32)
movsl
1:
-#ifdef CONFIG_OLPC_OPENFIRMWARE
+#ifdef CONFIG_OLPC
/* save OFW's pgdir table for later use when calling into OFW */
movl %cr3, %eax
movl %eax, pa(olpc_ofw_pgd)
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 5ee693faa111..948a31eae75f 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -223,15 +223,6 @@ void smp_x86_platform_ipi(struct pt_regs *regs)
EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
-#ifdef CONFIG_OF
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- return intspec[0];
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-#endif
-
#ifdef CONFIG_HOTPLUG_CPU
/* A cpu has been removed from cpu_online_mask. Reset irq affinities. */
void fixup_irqs(void)
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index d30854b18d25..f470e4ef993e 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -25,6 +25,7 @@
#include <asm/setup.h>
#include <asm/i8259.h>
#include <asm/traps.h>
+#include <asm/prom.h>
/*
* ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
@@ -120,6 +121,12 @@ void __init init_IRQ(void)
int i;
/*
+ * We probably need a better place for this, but it works for
+ * now ...
+ */
+ x86_add_irq_domains();
+
+ /*
* On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
* If these IRQ's are handled by legacy interrupt-controllers like PIC,
* then this configuration will likely be static after the boot. If
@@ -308,7 +315,7 @@ void __init native_init_IRQ(void)
set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
}
- if (!acpi_ioapic)
+ if (!acpi_ioapic && !of_ioapic)
setup_irq(2, &irq2);
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 6f39cab052d5..3f2ad2640d85 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -6,6 +6,7 @@
#include <linux/acpi.h>
#include <linux/bcd.h>
#include <linux/pnp.h>
+#include <linux/of.h>
#include <asm/vsyscall.h>
#include <asm/x86_init.h>
@@ -236,6 +237,8 @@ static __init int add_rtc_cmos(void)
}
}
#endif
+ if (of_have_populated_dt())
+ return 0;
platform_device_register(&rtc_device);
dev_info(&rtc_device.dev,
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c3a606c41ce0..b176f2b1f45d 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -113,6 +113,7 @@
#endif
#include <asm/mce.h>
#include <asm/alternative.h>
+#include <asm/prom.h>
/*
* end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -453,16 +454,30 @@ static void __init parse_setup_data(void)
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = early_memremap(pa_data, PAGE_SIZE);
+ u32 data_len, map_len;
+
+ map_len = max(PAGE_SIZE - (pa_data & ~PAGE_MASK),
+ (u64)sizeof(struct setup_data));
+ data = early_memremap(pa_data, map_len);
+ data_len = data->len + sizeof(struct setup_data);
+ if (data_len > map_len) {
+ early_iounmap(data, map_len);
+ data = early_memremap(pa_data, data_len);
+ map_len = data_len;
+ }
+
switch (data->type) {
case SETUP_E820_EXT:
- parse_e820_ext(data, pa_data);
+ parse_e820_ext(data);
+ break;
+ case SETUP_DTB:
+ add_dtb(pa_data);
break;
default:
break;
}
pa_data = data->next;
- early_iounmap(data, PAGE_SIZE);
+ early_iounmap(data, map_len);
}
}
@@ -1030,8 +1045,8 @@ void __init setup_arch(char **cmdline_p)
* Read APIC and some other early information from ACPI tables.
*/
acpi_boot_init();
-
sfi_init();
+ x86_dtb_init();
/*
* get boot-time SMP configuration:
@@ -1065,6 +1080,8 @@ void __init setup_arch(char **cmdline_p)
#endif
x86_init.oem.banner();
+ x86_init.timers.wallclock_init();
+
mcheck_init();
local_irq_save(flags);
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index ceb2911aa439..c11514e9128b 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -70,6 +70,7 @@ struct x86_init_ops x86_init __initdata = {
.setup_percpu_clockev = setup_boot_APIC_clock,
.tsc_pre_init = x86_init_noop,
.timer_init = hpet_time_init,
+ .wallclock_init = x86_init_noop,
},
.iommu = {
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 22:13:30 +0000