summaryrefslogtreecommitdiff
path: root/arch/sh/boards/mach-se
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-se')
-rw-r--r--arch/sh/boards/mach-se/7206/io.c2
-rw-r--r--arch/sh/boards/mach-se/7206/irq.c40
-rw-r--r--arch/sh/boards/mach-se/7343/irq.c10
-rw-r--r--arch/sh/boards/mach-se/7343/setup.c6
-rw-r--r--arch/sh/boards/mach-se/770x/irq.c14
-rw-r--r--arch/sh/boards/mach-se/7721/irq.c2
-rw-r--r--arch/sh/boards/mach-se/7721/setup.c8
-rw-r--r--arch/sh/boards/mach-se/7722/irq.c10
-rw-r--r--arch/sh/boards/mach-se/7722/setup.c34
-rw-r--r--arch/sh/boards/mach-se/7724/irq.c20
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c26
-rw-r--r--arch/sh/boards/mach-se/7780/irq.c18
-rw-r--r--arch/sh/boards/mach-se/7780/setup.c26
13 files changed, 108 insertions, 108 deletions
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 180455642a43..adadc77532ee 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -16,7 +16,7 @@
static inline void delay(void)
{
- ctrl_inw(0x20000000); /* P2 ROM Area */
+ __raw_readw(0x20000000); /* P2 ROM Area */
}
/* MS7750 requires special versions of in*, out* routines, since
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index aef7f052851a..79be4bc59933 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -32,12 +32,12 @@ static void disable_se7206_irq(unsigned int irq)
unsigned short msk0,msk1;
/* Set the priority in IPR to 0 */
- val = ctrl_inw(INTC_IPR01);
+ val = __raw_readw(INTC_IPR01);
val &= mask;
- ctrl_outw(val, INTC_IPR01);
+ __raw_writew(val, INTC_IPR01);
/* FPGA mask set */
- msk0 = ctrl_inw(INTMSK0);
- msk1 = ctrl_inw(INTMSK1);
+ msk0 = __raw_readw(INTMSK0);
+ msk1 = __raw_readw(INTMSK1);
switch (irq) {
case IRQ0_IRQ:
@@ -51,8 +51,8 @@ static void disable_se7206_irq(unsigned int irq)
msk1 |= 0x00ff;
break;
}
- ctrl_outw(msk0, INTMSK0);
- ctrl_outw(msk1, INTMSK1);
+ __raw_writew(msk0, INTMSK0);
+ __raw_writew(msk1, INTMSK1);
}
static void enable_se7206_irq(unsigned int irq)
@@ -62,13 +62,13 @@ static void enable_se7206_irq(unsigned int irq)
unsigned short msk0,msk1;
/* Set priority in IPR back to original value */
- val = ctrl_inw(INTC_IPR01);
+ val = __raw_readw(INTC_IPR01);
val |= value;
- ctrl_outw(val, INTC_IPR01);
+ __raw_writew(val, INTC_IPR01);
/* FPGA mask reset */
- msk0 = ctrl_inw(INTMSK0);
- msk1 = ctrl_inw(INTMSK1);
+ msk0 = __raw_readw(INTMSK0);
+ msk1 = __raw_readw(INTMSK1);
switch (irq) {
case IRQ0_IRQ:
@@ -82,8 +82,8 @@ static void enable_se7206_irq(unsigned int irq)
msk1 &= ~0x00ff;
break;
}
- ctrl_outw(msk0, INTMSK0);
- ctrl_outw(msk1, INTMSK1);
+ __raw_writew(msk0, INTMSK0);
+ __raw_writew(msk1, INTMSK1);
}
static void eoi_se7206_irq(unsigned int irq)
@@ -93,8 +93,8 @@ static void eoi_se7206_irq(unsigned int irq)
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_se7206_irq(irq);
/* FPGA isr clear */
- sts0 = ctrl_inw(INTSTS0);
- sts1 = ctrl_inw(INTSTS1);
+ sts0 = __raw_readw(INTSTS0);
+ sts1 = __raw_readw(INTSTS1);
switch (irq) {
case IRQ0_IRQ:
@@ -108,8 +108,8 @@ static void eoi_se7206_irq(unsigned int irq)
sts1 &= ~0x00ff;
break;
}
- ctrl_outw(sts0, INTSTS0);
- ctrl_outw(sts1, INTSTS1);
+ __raw_writew(sts0, INTSTS0);
+ __raw_writew(sts1, INTSTS1);
}
static struct irq_chip se7206_irq_chip __read_mostly = {
@@ -136,11 +136,11 @@ void __init init_se7206_IRQ(void)
make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
make_se7206_irq(IRQ1_IRQ); /* ATA */
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
- ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+ __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
/* FPGA System register setup*/
- ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
- ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+ __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
+ __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
- ctrl_outw(0x0001,INTSEL);
+ __raw_writew(0x0001,INTSEL);
}
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index c60fd13608d0..d4305c26e9f7 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -21,13 +21,13 @@ unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
static void disable_se7343_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
+ __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
}
static void enable_se7343_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
+ __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
}
static struct irq_chip se7343_irq_chip __read_mostly = {
@@ -39,7 +39,7 @@ static struct irq_chip se7343_irq_chip __read_mostly = {
static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = ctrl_inw(PA_CPLD_ST);
+ unsigned short intv = __raw_readw(PA_CPLD_ST);
unsigned int ext_irq = 0;
intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
@@ -59,8 +59,8 @@ void __init init_7343se_IRQ(void)
{
int i, irq;
- ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */
- ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
irq = create_irq();
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index 3412bb2973ae..d2370af56d77 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -161,10 +161,10 @@ device_initcall(sh7343se_devices_setup);
*/
static void __init sh7343se_setup(char **cmdline_p)
{
- ctrl_outw(0xf900, FPGA_OUT); /* FPGA */
+ __raw_writew(0xf900, FPGA_OUT); /* FPGA */
- ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
- ctrl_outw(0x0020, PORT_PSELD);
+ __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
+ __raw_writew(0x0020, PORT_PSELD);
printk(KERN_INFO "MS7343CP01 Setup...done\n");
}
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
index ec1fea571b52..1028c17b81bc 100644
--- a/arch/sh/boards/mach-se/770x/irq.c
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -96,13 +96,13 @@ static struct ipr_desc ipr_irq_desc = {
void __init init_se_IRQ(void)
{
/* Disable all interrupts */
- ctrl_outw(0, BCR_ILCRA);
- ctrl_outw(0, BCR_ILCRB);
- ctrl_outw(0, BCR_ILCRC);
- ctrl_outw(0, BCR_ILCRD);
- ctrl_outw(0, BCR_ILCRE);
- ctrl_outw(0, BCR_ILCRF);
- ctrl_outw(0, BCR_ILCRG);
+ __raw_writew(0, BCR_ILCRA);
+ __raw_writew(0, BCR_ILCRB);
+ __raw_writew(0, BCR_ILCRC);
+ __raw_writew(0, BCR_ILCRD);
+ __raw_writew(0, BCR_ILCRE);
+ __raw_writew(0, BCR_ILCRF);
+ __raw_writew(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
index b417acc4dad0..d85022ea3f12 100644
--- a/arch/sh/boards/mach-se/7721/irq.c
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -38,7 +38,7 @@ static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
void __init init_se7721_IRQ(void)
{
/* PPCR */
- ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+ __raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
register_intc_controller(&intc_desc);
intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
index 460da53b4961..7416ad7ee53a 100644
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -80,10 +80,10 @@ device_initcall(se7721_devices_setup);
static void __init se7721_setup(char **cmdline_p)
{
/* for USB */
- ctrl_outw(0x0000, 0xA405010C); /* PGCR */
- ctrl_outw(0x0000, 0xA405010E); /* PHCR */
- ctrl_outw(0x00AA, 0xA4050118); /* PPCR */
- ctrl_outw(0x0000, 0xA4050124); /* PSELA */
+ __raw_writew(0x0000, 0xA405010C); /* PGCR */
+ __raw_writew(0x0000, 0xA405010E); /* PHCR */
+ __raw_writew(0x00AA, 0xA4050118); /* PPCR */
+ __raw_writew(0x0000, 0xA4050124); /* PSELA */
}
/*
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index b221b6842b0d..61605db04ee6 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -21,13 +21,13 @@ unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
static void disable_se7722_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
+ __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
}
static void enable_se7722_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
+ __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
}
static struct irq_chip se7722_irq_chip __read_mostly = {
@@ -39,7 +39,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = ctrl_inw(IRQ01_STS);
+ unsigned short intv = __raw_readw(IRQ01_STS);
unsigned int ext_irq = 0;
intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
@@ -59,8 +59,8 @@ void __init init_se7722_IRQ(void)
{
int i, irq;
- ctrl_outw(0, IRQ01_MASK); /* disable all irqs */
- ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ __raw_writew(0, IRQ01_MASK); /* disable all irqs */
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
irq = create_irq();
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 93675418171d..80a4e571b310 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -156,32 +156,32 @@ device_initcall(se7722_devices_setup);
static void __init se7722_setup(char **cmdline_p)
{
- ctrl_outw(0x010D, FPGA_OUT); /* FPGA */
+ __raw_writew(0x010D, FPGA_OUT); /* FPGA */
- ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
- ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+ __raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
+ __raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
/* LCDC I/O */
- ctrl_outw(0x0020, PORT_PSELD);
+ __raw_writew(0x0020, PORT_PSELD);
/* SIOF1*/
- ctrl_outw(0x0003, PORT_PSELB);
- ctrl_outw(0xe000, PORT_PSELC);
- ctrl_outw(0x0000, PORT_PKCR);
+ __raw_writew(0x0003, PORT_PSELB);
+ __raw_writew(0xe000, PORT_PSELC);
+ __raw_writew(0x0000, PORT_PKCR);
/* LCDC */
- ctrl_outw(0x4020, PORT_PHCR);
- ctrl_outw(0x0000, PORT_PLCR);
- ctrl_outw(0x0000, PORT_PMCR);
- ctrl_outw(0x0002, PORT_PRCR);
- ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */
+ __raw_writew(0x4020, PORT_PHCR);
+ __raw_writew(0x0000, PORT_PLCR);
+ __raw_writew(0x0000, PORT_PMCR);
+ __raw_writew(0x0002, PORT_PRCR);
+ __raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */
/* KEYSC */
- ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
- ctrl_outw(0x0000, PORT_PYCR);
- ctrl_outw(0x0000, PORT_PZCR);
- ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
- ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+ __raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+ __raw_writew(0x0000, PORT_PYCR);
+ __raw_writew(0x0000, PORT_PZCR);
+ __raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+ __raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
}
/*
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
index f76cf3b49f23..e5e021a7d1e6 100644
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -72,14 +72,14 @@ static void disable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
- ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
+ __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
}
static void enable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
- ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+ __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
}
static struct irq_chip se7724_irq_chip __read_mostly = {
@@ -92,7 +92,7 @@ static struct irq_chip se7724_irq_chip __read_mostly = {
static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct fpga_irq set = get_fpga_irq(irq);
- unsigned short intv = ctrl_inw(set.sraddr);
+ unsigned short intv = __raw_readw(set.sraddr);
struct irq_desc *ext_desc;
unsigned int ext_irq = set.base;
@@ -115,13 +115,13 @@ void __init init_se7724_IRQ(void)
{
int i;
- ctrl_outw(0xffff, IRQ0_MR); /* mask all */
- ctrl_outw(0xffff, IRQ1_MR); /* mask all */
- ctrl_outw(0xffff, IRQ2_MR); /* mask all */
- ctrl_outw(0x0000, IRQ0_SR); /* clear irq */
- ctrl_outw(0x0000, IRQ1_SR); /* clear irq */
- ctrl_outw(0x0000, IRQ2_SR); /* clear irq */
- ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
+ __raw_writew(0xffff, IRQ0_MR); /* mask all */
+ __raw_writew(0xffff, IRQ1_MR); /* mask all */
+ __raw_writew(0xffff, IRQ2_MR); /* mask all */
+ __raw_writew(0x0000, IRQ0_SR); /* clear irq */
+ __raw_writew(0x0000, IRQ1_SR); /* clear irq */
+ __raw_writew(0x0000, IRQ2_SR); /* clear irq */
+ __raw_writew(0x002a, IRQ_MODE); /* set irq type */
for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index cbfba783ee49..242dc843f574 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -256,12 +256,12 @@ static struct platform_device ceu1_device = {
#define FCLKACR 0xa4150008
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@@ -522,7 +522,7 @@ static int __init sh_eth_is_eeprom_ready(void)
int t = 10000;
while (t--) {
- if (!ctrl_inw(EEPROM_STAT))
+ if (!__raw_readw(EEPROM_STAT))
return 1;
cpu_relax();
}
@@ -542,13 +542,13 @@ static void __init sh_eth_init(void)
/* read MAC addr from EEPROM */
for (i = 0 ; i < 3 ; i++) {
- ctrl_outw(0x0, EEPROM_OP); /* read */
- ctrl_outw(i*2, EEPROM_ADR);
- ctrl_outw(0x1, EEPROM_STRT);
+ __raw_writew(0x0, EEPROM_OP); /* read */
+ __raw_writew(i*2, EEPROM_ADR);
+ __raw_writew(0x1, EEPROM_STRT);
if (!sh_eth_is_eeprom_ready())
return;
- mac = ctrl_inw(EEPROM_DATA);
+ mac = __raw_readw(EEPROM_DATA);
sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
@@ -585,7 +585,7 @@ arch_initcall(arch_setup);
static int __init devices_setup(void)
{
- u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+ u16 sw = __raw_readw(SW4140); /* select camera, monitor */
struct clk *fsia_clk;
/* register board specific self-refresh code */
@@ -595,7 +595,7 @@ static int __init devices_setup(void)
&ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end);
/* Reset Release */
- ctrl_outw(ctrl_inw(FPGA_OUT) &
+ __raw_writew(__raw_readw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
(1 << 7) | /* AK4643 */
@@ -604,7 +604,7 @@ static int __init devices_setup(void)
FPGA_OUT);
/* turn on USB clocks, use external clock */
- ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
#ifdef CONFIG_PM
/* Let LED9 show STATUS2 */
@@ -633,10 +633,10 @@ static int __init devices_setup(void)
#endif
/* enable USB0 port */
- ctrl_outw(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa40501d4);
/* enable USB1 port */
- ctrl_outw(0x0600, 0xa4050192);
+ __raw_writew(0x0600, 0xa4050192);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
@@ -684,7 +684,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
/* enable CEU0 */
gpio_request(GPIO_FN_VIO0_D15, NULL);
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 121744c08714..d5c9edc172a3 100644
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -24,30 +24,30 @@
void __init init_se7780_IRQ(void)
{
/* enable all interrupt at FPGA */
- ctrl_outw(0, FPGA_INTMSK1);
+ __raw_writew(0, FPGA_INTMSK1);
/* mask SM501 interrupt */
- ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+ __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
/* enable all interrupt at FPGA */
- ctrl_outw(0, FPGA_INTMSK2);
+ __raw_writew(0, FPGA_INTMSK2);
/* set FPGA INTSEL register */
/* FPGA + 0x06 */
- ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+ __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
/* FPGA + 0x08 */
- ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+ __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
/* FPGA + 0x0A */
- ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+ __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
/* ICR1: detect low level(for 2ndcut) */
- ctrl_outl(0xAAAA0000, INTC_ICR1);
+ __raw_writel(0xAAAA0000, INTC_ICR1);
/*
* FPGA PCISEL register initialize
@@ -63,6 +63,6 @@ void __init init_se7780_IRQ(void)
* INTD || INTD | INTC | -- | INTA
* -------------------------------------
*/
- ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
- ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
+ __raw_writew(0x0013, FPGA_PCI_INTSEL1);
+ __raw_writew(0xE402, FPGA_PCI_INTSEL2);
}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
index f7bfb3f83692..6f7c207138e1 100644
--- a/arch/sh/boards/mach-se/7780/setup.c
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -75,14 +75,14 @@ device_initcall(se7780_devices_setup);
static void __init se7780_setup(char **cmdline_p)
{
/* "SH-Linux" on LED Display */
- ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
- ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
- ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
- ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
- ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
- ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
- ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
- ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+ __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+ __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+ __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+ __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+ __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+ __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+ __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+ __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
@@ -93,15 +93,15 @@ static void __init se7780_setup(char **cmdline_p)
* REQ2/GNT2 -> Serial ATA
* REQ3/GNT3 -> PCI slot
*/
- ctrl_outw(0x0213, FPGA_REQSEL);
+ __raw_writew(0x0213, FPGA_REQSEL);
/* GPIO setting */
- ctrl_outw(0x0000, GPIO_PECR);
- ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
- ctrl_outw(0x0c00, GPIO_PMSELR);
+ __raw_writew(0x0000, GPIO_PECR);
+ __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+ __raw_writew(0x0c00, GPIO_PMSELR);
/* iVDR Power ON */
- ctrl_outw(0x0001, FPGA_IVDRPW);
+ __raw_writew(0x0001, FPGA_IVDRPW);
}
/*
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 02:36:15 +0000