diff options
Diffstat (limited to 'arch/mn10300')
| -rw-r--r-- | arch/mn10300/Kconfig | 4 | ||||
| -rw-r--r-- | arch/mn10300/include/asm/rtc-regs.h | 4 | ||||
| -rw-r--r-- | arch/mn10300/kernel/rtc.c | 104 | ||||
| -rw-r--r-- | arch/mn10300/proc-mn103e010/proc-init.c | 1 |
4 files changed, 15 insertions, 98 deletions
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 9627e81a6cbb..38e3494bfb63 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -236,7 +236,9 @@ source "kernel/Kconfig.hz" config MN10300_RTC bool "Using MN10300 RTC" depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 - select GENERIC_CMOS_UPDATE + select RTC_CLASS + select RTC_DRV_CMOS + select RTC_SYSTOHC default n help This option enables support for the RTC, thus enabling time to be diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h index c42deefaec11..c81cacecb6e3 100644 --- a/arch/mn10300/include/asm/rtc-regs.h +++ b/arch/mn10300/include/asm/rtc-regs.h @@ -75,9 +75,9 @@ #define RTC_PORT(x) 0xd8600000 #define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ -#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8) +#define CMOS_READ(addr) __SYSREG(0xd8600000 + (u32)(addr), u8) #define CMOS_WRITE(val, addr) \ - do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0) + do { __SYSREG(0xd8600000 + (u32)(addr), u8) = val; } while (0) #define RTC_IRQ RTIRQ diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c index 77e0be4d92ea..f81f37025072 100644 --- a/arch/mn10300/kernel/rtc.c +++ b/arch/mn10300/kernel/rtc.c @@ -12,107 +12,19 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/mc146818rtc.h> -#include <linux/bcd.h> -#include <linux/timex.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + #include <asm/rtc-regs.h> #include <asm/rtc.h> DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -/* - * Read the current RTC time - */ -void read_persistent_clock(struct timespec *ts) -{ - struct rtc_time tm; - - mc146818_set_time(&tm); - - ts->tv_nsec = 0; - ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); - - /* if rtc is way off in the past, set something reasonable */ - if (ts->tv_sec < 0) - ts->tv_sec = mktime(2009, 1, 1, 12, 0, 0); -} - -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500 - * ms after the second nowtime has started, because when nowtime is written - * into the registers of the CMOS clock, it will jump to the next second - * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data - * sheet for details. - * - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! - */ -static int set_rtc_mmss(unsigned long nowtime) -{ - unsigned char save_control, save_freq_select; - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - - /* gets recalled with irq locally disabled */ - spin_lock(&rtc_lock); - save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being - * set */ - CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL); - - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset - * prescaler */ - CMOS_WRITE(save_freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - cmos_minutes = bcd2bin(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) - /* correct for half hour time zone */ - real_minutes += 30; - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - real_seconds = bin2bcd(real_seconds); - real_minutes = bin2bcd(real_minutes); - } - CMOS_WRITE(real_seconds, RTC_SECONDS); - CMOS_WRITE(real_minutes, RTC_MINUTES); - } else { - printk_once(KERN_NOTICE - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - spin_unlock(&rtc_lock); - - return retval; -} - -int update_persistent_clock(struct timespec now) -{ - return set_rtc_mmss(now.tv_sec); -} +static const __initdata struct resource res[] = { + DEFINE_RES_IO(RTC_PORT(0), RTC_IO_EXTENT), + DEFINE_RES_IRQ(RTC_IRQ), +}; /* * calibrate the TSC clock against the RTC @@ -129,4 +41,6 @@ void __init calibrate_clock(void) RTCRA |= RTCRA_DVR; RTCRA &= ~RTCRA_DVR; RTCRB &= ~RTCRB_SET; + + platform_device_register_simple("rtc_cmos", -1, res, ARRAY_SIZE(res)); } diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c index 94641c420b3f..102d86a6ae56 100644 --- a/arch/mn10300/proc-mn103e010/proc-init.c +++ b/arch/mn10300/proc-mn103e010/proc-init.c @@ -9,6 +9,7 @@ * 2 of the Licence, or (at your option) any later version. */ #include <linux/kernel.h> +#include <linux/irq.h> #include <asm/cacheflush.h> #include <asm/fpu.h> #include <asm/irq.h> |