summaryrefslogtreecommitdiff
path: root/arch/i386/kernel/entry.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/entry.S')
-rw-r--r--arch/i386/kernel/entry.S39
1 files changed, 26 insertions, 13 deletions
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index d274612e05cd..de34b7fed3c1 100644
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -53,6 +53,19 @@
#include <asm/dwarf2.h>
#include "irq_vectors.h"
+/*
+ * We use macros for low-level operations which need to be overridden
+ * for paravirtualization. The following will never clobber any registers:
+ * INTERRUPT_RETURN (aka. "iret")
+ * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
+ * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ *
+ * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
+ * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
+ * Allowing a register to be clobbered can shrink the paravirt replacement
+ * enough to patch inline, increasing performance.
+ */
+
#define nr_syscalls ((syscall_table_size)/4)
CF_MASK = 0x00000001
@@ -63,9 +76,9 @@ NT_MASK = 0x00004000
VM_MASK = 0x00020000
#ifdef CONFIG_PREEMPT
-#define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF
+#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
#else
-#define preempt_stop
+#define preempt_stop(clobbers)
#define resume_kernel restore_nocheck
#endif
@@ -226,7 +239,7 @@ ENTRY(ret_from_fork)
ALIGN
RING0_PTREGS_FRAME
ret_from_exception:
- preempt_stop
+ preempt_stop(CLBR_ANY)
ret_from_intr:
GET_THREAD_INFO(%ebp)
check_userspace:
@@ -237,7 +250,7 @@ check_userspace:
jb resume_kernel # not returning to v8086 or userspace
ENTRY(resume_userspace)
- DISABLE_INTERRUPTS # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
@@ -248,7 +261,7 @@ ENTRY(resume_userspace)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
- DISABLE_INTERRUPTS
+ DISABLE_INTERRUPTS(CLBR_ANY)
cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
jnz restore_nocheck
need_resched:
@@ -277,7 +290,7 @@ sysenter_past_esp:
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
- ENABLE_INTERRUPTS
+ ENABLE_INTERRUPTS(CLBR_NONE)
pushl $(__USER_DS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ss, 0*/
@@ -322,7 +335,7 @@ sysenter_past_esp:
jae syscall_badsys
call *sys_call_table(,%eax,4)
movl %eax,PT_EAX(%esp)
- DISABLE_INTERRUPTS
+ DISABLE_INTERRUPTS(CLBR_ECX|CLBR_EDX)
TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
@@ -364,7 +377,7 @@ syscall_call:
call *sys_call_table(,%eax,4)
movl %eax,PT_EAX(%esp) # store the return value
syscall_exit:
- DISABLE_INTERRUPTS # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
@@ -393,7 +406,7 @@ restore_nocheck_notrace:
.section .fixup,"ax"
iret_exc:
TRACE_IRQS_ON
- ENABLE_INTERRUPTS
+ ENABLE_INTERRUPTS(CLBR_NONE)
pushl $0 # no error code
pushl $do_iret_error
jmp error_code
@@ -436,7 +449,7 @@ ldt_ss:
CFI_ADJUST_CFA_OFFSET 4
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
- DISABLE_INTERRUPTS
+ DISABLE_INTERRUPTS(CLBR_EAX)
TRACE_IRQS_OFF
lss (%esp), %esp
CFI_ADJUST_CFA_OFFSET -8
@@ -451,7 +464,7 @@ work_pending:
jz work_notifysig
work_resched:
call schedule
- DISABLE_INTERRUPTS # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
@@ -509,7 +522,7 @@ syscall_exit_work:
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
TRACE_IRQS_ON
- ENABLE_INTERRUPTS # could let do_syscall_trace() call
+ ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
@@ -693,7 +706,7 @@ ENTRY(device_not_available)
GET_CR0_INTO_EAX
testl $0x4, %eax # EM (math emulation bit)
jne device_not_available_emulate
- preempt_stop
+ preempt_stop(CLBR_ANY)
call math_state_restore
jmp ret_from_exception
device_not_available_emulate: