diff options
Diffstat (limited to 'arch/cris/arch-v10')
| -rw-r--r-- | arch/cris/arch-v10/drivers/Kconfig | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/eeprom.c | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/gpio.c | 82 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/i2c.c | 39 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/i2c.h | 3 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/sync_serial.c | 30 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/fasttimer.c | 6 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/head.S | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/time.c | 54 |
9 files changed, 98 insertions, 122 deletions
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 58f5864a6680..0d7221779923 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -383,7 +383,7 @@ config ETRAX_RS485 depends on ETRAX_SERIAL help Enables support for RS-485 serial communication. For a primer on - RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>. + RS-485, see <http://en.wikipedia.org/wiki/Rs485> config ETRAX_RS485_ON_PA bool "RS-485 mode on PA" diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c index c3405507a3d1..5047a33043bd 100644 --- a/arch/cris/arch-v10/drivers/eeprom.c +++ b/arch/cris/arch-v10/drivers/eeprom.c @@ -28,7 +28,6 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/interrupt.h> -#include <linux/smp_lock.h> #include <linux/wait.h> #include <asm/uaccess.h> #include "i2c.h" @@ -376,7 +375,6 @@ int __init eeprom_init(void) /* Opens the device. */ static int eeprom_open(struct inode * inode, struct file * file) { - cycle_kernel_lock(); if(iminor(inode) != EEPROM_MINOR_NR) return -ENXIO; if(imajor(inode) != EEPROM_MAJOR_NR) diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index 4b0f65fac8e8..a07b6d25b0c7 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -16,7 +16,6 @@ #include <linux/errno.h> #include <linux/kernel.h> #include <linux/fs.h> -#include <linux/smp_lock.h> #include <linux/string.h> #include <linux/poll.h> #include <linux/init.h> @@ -46,8 +45,7 @@ static char gpio_name[] = "etrax gpio"; static wait_queue_head_t *gpio_wq; #endif -static int gpio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); +static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg); static ssize_t gpio_write(struct file *file, const char __user *buf, size_t count, loff_t *off); static int gpio_open(struct inode *inode, struct file *filp); @@ -324,7 +322,6 @@ gpio_open(struct inode *inode, struct file *filp) if (!priv) return -ENOMEM; - lock_kernel(); priv->minor = p; /* initialize the io/alarm struct */ @@ -359,7 +356,6 @@ gpio_open(struct inode *inode, struct file *filp) alarmlist = priv; spin_unlock_irqrestore(&gpio_lock, flags); - unlock_kernel(); return 0; } @@ -504,9 +500,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg); -static int -gpio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { unsigned long flags; unsigned long val; @@ -516,54 +510,65 @@ gpio_ioctl(struct inode *inode, struct file *file, if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) return -EINVAL; - spin_lock_irqsave(&gpio_lock, flags); - switch (_IOC_NR(cmd)) { case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ // read the port + spin_lock_irqsave(&gpio_lock, flags); if (USE_PORTS(priv)) { ret = *priv->port; } else if (priv->minor == GPIO_MINOR_G) { ret = (*R_PORT_G_DATA) & 0x7FFFFFFF; } + spin_unlock_irqrestore(&gpio_lock, flags); + break; case IO_SETBITS: // set changeable bits with a 1 in arg + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { - *priv->port = *priv->shadow |= + *priv->port = *priv->shadow |= ((unsigned char)arg & priv->changeable_bits); } else if (priv->minor == GPIO_MINOR_G) { *R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits); } + spin_unlock_irqrestore(&gpio_lock, flags); + break; case IO_CLRBITS: // clear changeable bits with a 1 in arg + spin_lock_irqsave(&gpio_lock, flags); if (USE_PORTS(priv)) { - *priv->port = *priv->shadow &= + *priv->port = *priv->shadow &= ~((unsigned char)arg & priv->changeable_bits); } else if (priv->minor == GPIO_MINOR_G) { *R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits); } + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_HIGHALARM: // set alarm when bits with 1 in arg go high + spin_lock_irqsave(&gpio_lock, flags); priv->highalarm |= arg; gpio_some_alarms = 1; + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_LOWALARM: // set alarm when bits with 1 in arg go low + spin_lock_irqsave(&gpio_lock, flags); priv->lowalarm |= arg; gpio_some_alarms = 1; + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_CLRALARM: - // clear alarm for bits with 1 in arg + /* clear alarm for bits with 1 in arg */ + spin_lock_irqsave(&gpio_lock, flags); priv->highalarm &= ~arg; priv->lowalarm &= ~arg; { /* Must update gpio_some_alarms */ struct gpio_private *p = alarmlist; int some_alarms; - spin_lock_irq(&gpio_lock); p = alarmlist; some_alarms = 0; while (p) { @@ -574,11 +579,12 @@ gpio_ioctl(struct inode *inode, struct file *file, p = p->next; } gpio_some_alarms = some_alarms; - spin_unlock_irq(&gpio_lock); } + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ /* Read direction 0=input 1=output */ + spin_lock_irqsave(&gpio_lock, flags); if (USE_PORTS(priv)) { ret = *priv->dir_shadow; } else if (priv->minor == GPIO_MINOR_G) { @@ -587,30 +593,40 @@ gpio_ioctl(struct inode *inode, struct file *file, */ ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF; } + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input + /* Set direction 0=unchanged 1=input, + * return mask with 1=input */ + spin_lock_irqsave(&gpio_lock, flags); ret = setget_input(priv, arg) & 0x7FFFFFFF; + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ - /* Set direction 0=unchanged 1=output, - * return mask with 1=output + /* Set direction 0=unchanged 1=output, + * return mask with 1=output */ + spin_lock_irqsave(&gpio_lock, flags); ret = setget_output(priv, arg) & 0x7FFFFFFF; + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_SHUTDOWN: + spin_lock_irqsave(&gpio_lock, flags); SOFT_SHUTDOWN(); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_GET_PWR_BT: + spin_lock_irqsave(&gpio_lock, flags); #if defined (CONFIG_ETRAX_SOFT_SHUTDOWN) ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT)); #else ret = 0; #endif + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_CFG_WRITE_MODE: + spin_lock_irqsave(&gpio_lock, flags); priv->clk_mask = arg & 0xFF; priv->data_mask = (arg >> 8) & 0xFF; priv->write_msb = (arg >> 16) & 0x01; @@ -626,28 +642,33 @@ gpio_ioctl(struct inode *inode, struct file *file, priv->data_mask = 0; ret = -EPERM; } + spin_unlock_irqrestore(&gpio_lock, flags); break; - case IO_READ_INBITS: + case IO_READ_INBITS: /* *arg is result of reading the input pins */ + spin_lock_irqsave(&gpio_lock, flags); if (USE_PORTS(priv)) { val = *priv->port; } else if (priv->minor == GPIO_MINOR_G) { val = *R_PORT_G_DATA; } + spin_unlock_irqrestore(&gpio_lock, flags); if (copy_to_user((void __user *)arg, &val, sizeof(val))) ret = -EFAULT; break; case IO_READ_OUTBITS: /* *arg is result of reading the output shadow */ + spin_lock_irqsave(&gpio_lock, flags); if (USE_PORTS(priv)) { val = *priv->shadow; } else if (priv->minor == GPIO_MINOR_G) { val = port_g_data_shadow; } + spin_unlock_irqrestore(&gpio_lock, flags); if (copy_to_user((void __user *)arg, &val, sizeof(val))) ret = -EFAULT; break; - case IO_SETGET_INPUT: + case IO_SETGET_INPUT: /* bits set in *arg is set to input, * *arg updated with current input pins. */ @@ -656,7 +677,9 @@ gpio_ioctl(struct inode *inode, struct file *file, ret = -EFAULT; break; } + spin_lock_irqsave(&gpio_lock, flags); val = setget_input(priv, val); + spin_unlock_irqrestore(&gpio_lock, flags); if (copy_to_user((void __user *)arg, &val, sizeof(val))) ret = -EFAULT; break; @@ -668,18 +691,21 @@ gpio_ioctl(struct inode *inode, struct file *file, ret = -EFAULT; break; } + spin_lock_irqsave(&gpio_lock, flags); val = setget_output(priv, val); + spin_unlock_irqrestore(&gpio_lock, flags); if (copy_to_user((void __user *)arg, &val, sizeof(val))) ret = -EFAULT; break; default: + spin_lock_irqsave(&gpio_lock, flags); if (priv->minor == GPIO_MINOR_LEDS) ret = gpio_leds_ioctl(cmd, arg); else ret = -EINVAL; + spin_unlock_irqrestore(&gpio_lock, flags); } /* switch */ - spin_unlock_irqrestore(&gpio_lock, flags); return ret; } @@ -713,12 +739,12 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) } static const struct file_operations gpio_fops = { - .owner = THIS_MODULE, - .poll = gpio_poll, - .ioctl = gpio_ioctl, - .write = gpio_write, - .open = gpio_open, - .release = gpio_release, + .owner = THIS_MODULE, + .poll = gpio_poll, + .unlocked_ioctl = gpio_ioctl, + .write = gpio_write, + .open = gpio_open, + .release = gpio_release, }; static void ioif_watcher(const unsigned int gpio_in_available, diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index a8737a8eb229..77a941813819 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/fs.h> @@ -60,8 +59,8 @@ static const char i2c_name[] = "i2c"; #define SDABIT CONFIG_ETRAX_I2C_DATA_PORT #define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT -#define i2c_enable() -#define i2c_disable() +#define i2c_enable() +#define i2c_disable() /* enable or disable output-enable, to select output or input on the i2c bus */ @@ -91,7 +90,7 @@ static const char i2c_name[] = "i2c"; #define i2c_dir_out() \ *R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \ - REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1); + REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1); #define i2c_dir_in() \ *R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \ REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0); @@ -189,7 +188,7 @@ i2c_outbyte(unsigned char x) } else { i2c_data(I2C_DATA_LOW); } - + i2c_delay(CLOCK_LOW_TIME/2); i2c_clk(I2C_CLOCK_HIGH); i2c_delay(CLOCK_HIGH_TIME); @@ -416,7 +415,7 @@ i2c_sendnack(void) *# *#--------------------------------------------------------------------------*/ int -i2c_writereg(unsigned char theSlave, unsigned char theReg, +i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue) { int error, cntr = 3; @@ -468,7 +467,7 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg, * enable interrupt again */ local_irq_restore(flags); - + } while(error && cntr--); i2c_delay(CLOCK_LOW_TIME); @@ -504,7 +503,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) * generate start condition */ i2c_start(); - + /* * send slave address */ @@ -555,7 +554,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) * enable interrupt again */ local_irq_restore(flags); - + } while(error && cntr--); spin_unlock(&i2c_lock); @@ -566,7 +565,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) static int i2c_open(struct inode *inode, struct file *filp) { - cycle_kernel_lock(); return 0; } @@ -579,9 +577,7 @@ i2c_release(struct inode *inode, struct file *filp) /* Main device API. ioctl's to write or read to/from i2c registers. */ -static int -i2c_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) { return -EINVAL; @@ -590,7 +586,7 @@ i2c_ioctl(struct inode *inode, struct file *file, switch (_IOC_NR(cmd)) { case I2C_WRITEREG: /* write to an i2c slave */ - D(printk("i2cw %d %d %d\n", + D(printk(KERN_DEBUG "i2cw %d %d %d\n", I2C_ARGSLAVE(arg), I2C_ARGREG(arg), I2C_ARGVALUE(arg))); @@ -602,26 +598,25 @@ i2c_ioctl(struct inode *inode, struct file *file, { unsigned char val; /* read from an i2c slave */ - D(printk("i2cr %d %d ", + D(printk(KERN_DEBUG "i2cr %d %d ", I2C_ARGSLAVE(arg), I2C_ARGREG(arg))); val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg)); - D(printk("= %d\n", val)); + D(printk(KERN_DEBUG "= %d\n", val)); return val; - } + } default: return -EINVAL; } - return 0; } static const struct file_operations i2c_fops = { - .owner = THIS_MODULE, - .ioctl = i2c_ioctl, - .open = i2c_open, - .release = i2c_release, + .owner = THIS_MODULE, + .unlocked_ioctl = i2c_ioctl, + .open = i2c_open, + .release = i2c_release, }; int __init diff --git a/arch/cris/arch-v10/drivers/i2c.h b/arch/cris/arch-v10/drivers/i2c.h index 4ee91426bd40..e36c96276478 100644 --- a/arch/cris/arch-v10/drivers/i2c.h +++ b/arch/cris/arch-v10/drivers/i2c.h @@ -1,5 +1,4 @@ -/* $Id: i2c.h,v 1.3 2004/05/28 09:26:59 starvik Exp $ */ - +/* i2c.h */ int i2c_init(void); /* High level I2C actions */ diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 109dcd826d17..ee2dd4323daf 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -157,7 +157,7 @@ static int sync_serial_open(struct inode *inode, struct file *file); static int sync_serial_release(struct inode *inode, struct file *file); static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); -static int sync_serial_ioctl(struct inode *inode, struct file *file, +static int sync_serial_ioctl(struct file *file, unsigned int cmd, unsigned long arg); static ssize_t sync_serial_write(struct file *file, const char *buf, size_t count, loff_t *ppos); @@ -244,13 +244,13 @@ static unsigned sync_serial_prescale_shadow; #define NUMBER_OF_PORTS 2 static const struct file_operations sync_serial_fops = { - .owner = THIS_MODULE, - .write = sync_serial_write, - .read = sync_serial_read, - .poll = sync_serial_poll, - .ioctl = sync_serial_ioctl, - .open = sync_serial_open, - .release = sync_serial_release + .owner = THIS_MODULE, + .write = sync_serial_write, + .read = sync_serial_read, + .poll = sync_serial_poll, + .unlocked_ioctl = sync_serial_ioctl, + .open = sync_serial_open, + .release = sync_serial_release }; static int __init etrax_sync_serial_init(void) @@ -678,7 +678,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait) return mask; } -static int sync_serial_ioctl(struct inode *inode, struct file *file, +static int sync_serial_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg) { int return_val = 0; @@ -956,6 +956,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, return return_val; } +static long sync_serial_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + long ret; + + lock_kernel(); + ret = sync_serial_ioctl_unlocked(file, cmd, arg); + unlock_kernel(); + + return ret; +} + static ssize_t sync_serial_write(struct file *file, const char *buf, size_t count, loff_t *ppos) diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 5ff08a8695e9..8a8196ee8ce8 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -467,11 +467,7 @@ timer1_handler(int irq, void *dev_id) static void wake_up_func(unsigned long data) { -#ifdef DECLARE_WAITQUEUE - wait_queue_head_t *sleep_wait_p = (wait_queue_head_t*)data; -#else - struct wait_queue **sleep_wait_p = (struct wait_queue **)data; -#endif + wait_queue_head_t *sleep_wait_p = (wait_queue_head_t *)data; wake_up(sleep_wait_p); } diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index fc4577102933..a1f2014b4e3b 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -280,7 +280,7 @@ _no_romfs_in_flash: ;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does ;; not need this mechanism anyway) - move.d __vmlinux_end, $r0; the image will be after the vmlinux end address + move.d __init_end, $r0; the image will be after the end of init move.d [$r0], $r1 ; cramfs assumes same endian on host/target cmp.d CRAMFS_MAGIC, $r1; magic value in cramfs superblock bne 2f diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 30adae594aef..00eb36f8debf 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -61,66 +61,16 @@ unsigned long get_ns_in_jiffie(void) unsigned long do_slow_gettimeoffset(void) { - unsigned long count, t1; - unsigned long usec_count = 0; - unsigned short presc_count; - - static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */ - static unsigned long jiffies_p = 0; - - /* - * cache volatile jiffies temporarily; we have IRQs turned off. - */ - unsigned long jiffies_t; + unsigned long count; /* The timer interrupt comes from Etrax timer 0. In order to get * better precision, we check the current value. It might have * underflowed already though. */ - -#ifndef CONFIG_SVINTO_SIM - /* Not available in the xsim simulator. */ count = *R_TIMER0_DATA; - presc_count = *R_TIM_PRESC_STATUS; - /* presc_count might be wrapped */ - t1 = *R_TIMER0_DATA; - if (count != t1){ - /* it wrapped, read prescaler again... */ - presc_count = *R_TIM_PRESC_STATUS; - count = t1; - } -#else - count = 0; - presc_count = 0; -#endif - - jiffies_t = jiffies; - /* - * avoiding timer inconsistencies (they are rare, but they happen)... - * there are one problem that must be avoided here: - * 1. the timer counter underflows - */ - if( jiffies_t == jiffies_p ) { - if( count > count_p ) { - /* Timer wrapped, use new count and prescale - * increase the time corresponding to one jiffie - */ - usec_count = 1000000/HZ; - } - } else - jiffies_p = jiffies_t; - count_p = count; - if (presc_count >= PRESCALE_VALUE/2 ){ - presc_count = PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2; - } else { - presc_count = PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2; - } /* Convert timer value to usec */ - usec_count += ( (TIMER0_DIV - count) * (1000000/HZ)/TIMER0_DIV ) + - (( (presc_count) * (1000000000/PRESCALE_FREQ))/1000); - - return usec_count; + return (TIMER0_DIV - count) * ((NSEC_PER_SEC/1000)/HZ)/TIMER0_DIV; } /* Excerpt from the Etrax100 HSDD about the built-in watchdog: |