diff options
Diffstat (limited to 'arch/arm')
90 files changed, 864 insertions, 4415 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9246bd7cc3cf..0365cbbc9179 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -621,28 +621,6 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_SHMOBILE_LEGACY - bool "Renesas ARM SoCs (non-multiplatform)" - select ARCH_SHMOBILE - select ARM_PATCH_PHYS_VIRT if MMU - select CLKDEV_LOOKUP - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select MULTI_IRQ_HANDLER - select NO_IOPORT_MAP - select PINCTRL - select PM_GENERIC_DOMAINS if PM - select SH_CLK_CPG - select SPARSE_IRQ - help - Support for Renesas ARM SoC platforms using a non-multiplatform - kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car - and RZ families. - config ARCH_RPC bool "RiscPC" depends on MMU @@ -1537,7 +1515,6 @@ config HZ_FIXED default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ ARCH_S5PV210 || ARCH_EXYNOS4 default 128 if SOC_AT91RM9200 - default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY default 0 choice @@ -1756,8 +1733,7 @@ config ARM_MODULE_PLTS source "mm/Kconfig" config FORCE_MAX_ZONEORDER - int "Maximum zone order" if ARCH_SHMOBILE_LEGACY - range 11 64 if ARCH_SHMOBILE_LEGACY + int "Maximum zone order" default "12" if SOC_AM33XX default "9" if SA1111 || ARCH_EFM32 default "11" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0cfd7f947f6b..40a3c25c1e0d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1621,8 +1621,7 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \ - ARCH_SHMOBILE_LEGACY + PLAT_SAMSUNG || ARM_SINGLE_ARMV7M default "mach/uncompress.h" config EARLY_PRINTK diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6019f5d3ad7f..19b348ec65e8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -522,9 +522,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ - r8a7778-bockw.dtb \ - r8a7778-bockw-reference.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts index b4031fa4a567..504cf45d3cb8 100644 --- a/arch/arm/boot/dts/efm32gg-dk3750.dts +++ b/arch/arm/boot/dts/efm32gg-dk3750.dts @@ -26,7 +26,7 @@ }; i2c@4000a000 { - efm32,location = <3>; + energymicro,location = <3>; status = "ok"; temp@48 { @@ -43,7 +43,7 @@ spi0: spi@4000c000 { /* USART0 */ cs-gpios = <&gpio 68 1>; // E4 - location = <1>; + energymicro,location = <1>; status = "ok"; microsd@0 { @@ -57,7 +57,7 @@ spi1: spi@4000c400 { /* USART1 */ cs-gpios = <&gpio 51 1>; // D3 - location = <1>; + energymicro,location = <1>; status = "ok"; ks8851@0 { @@ -70,7 +70,7 @@ }; uart4: uart@4000e400 { /* UART1 */ - location = <2>; + energymicro,location = <2>; status = "ok"; }; diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi index 106d505c5d3d..c747983771c7 100644 --- a/arch/arm/boot/dts/efm32gg.dtsi +++ b/arch/arm/boot/dts/efm32gg.dtsi @@ -23,7 +23,7 @@ soc { adc: adc@40002000 { - compatible = "efm32,adc"; + compatible = "energymicro,efm32-adc"; reg = <0x40002000 0x400>; interrupts = <7>; clocks = <&cmu clk_HFPERCLKADC0>; @@ -31,7 +31,7 @@ }; gpio: gpio@40006000 { - compatible = "efm32,gpio"; + compatible = "energymicro,efm32-gpio"; reg = <0x40006000 0x1000>; interrupts = <1 11>; gpio-controller; @@ -45,7 +45,7 @@ i2c0: i2c@4000a000 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a000 0x400>; interrupts = <9>; clocks = <&cmu clk_HFPERCLKI2C0>; @@ -56,7 +56,7 @@ i2c1: i2c@4000a400 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a400 0x400>; interrupts = <10>; clocks = <&cmu clk_HFPERCLKI2C1>; @@ -67,7 +67,7 @@ spi0: spi@4000c000 { /* USART0 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c000 0x400>; interrupts = <3 4>; clocks = <&cmu clk_HFPERCLKUSART0>; @@ -77,7 +77,7 @@ spi1: spi@4000c400 { /* USART1 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu clk_HFPERCLKUSART1>; @@ -87,7 +87,7 @@ spi2: spi@4000c800 { /* USART2 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c800 0x400>; interrupts = <18 19>; clocks = <&cmu clk_HFPERCLKUSART2>; @@ -95,7 +95,7 @@ }; uart0: uart@4000c000 { /* USART0 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c000 0x400>; interrupts = <3 4>; clocks = <&cmu clk_HFPERCLKUSART0>; @@ -103,7 +103,7 @@ }; uart1: uart@4000c400 { /* USART1 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu clk_HFPERCLKUSART1>; @@ -111,7 +111,7 @@ }; uart2: uart@4000c800 { /* USART2 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c800 0x400>; interrupts = <18 19>; clocks = <&cmu clk_HFPERCLKUSART2>; @@ -119,7 +119,7 @@ }; uart3: uart@4000e000 { /* UART0 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000e000 0x400>; interrupts = <20 21>; clocks = <&cmu clk_HFPERCLKUART0>; @@ -127,7 +127,7 @@ }; uart4: uart@4000e400 { /* UART1 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000e400 0x400>; interrupts = <22 23>; clocks = <&cmu clk_HFPERCLKUART1>; @@ -135,28 +135,28 @@ }; timer0: timer@40010000 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010000 0x400>; interrupts = <2>; clocks = <&cmu clk_HFPERCLKTIMER0>; }; timer1: timer@40010400 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010400 0x400>; interrupts = <12>; clocks = <&cmu clk_HFPERCLKTIMER1>; }; timer2: timer@40010800 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010800 0x400>; interrupts = <13>; clocks = <&cmu clk_HFPERCLKTIMER2>; }; timer3: timer@40010c00 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010c00 0x400>; interrupts = <14>; clocks = <&cmu clk_HFPERCLKTIMER3>; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts deleted file mode 100644 index dffa6ff30360..000000000000 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Reference Device Tree Source for the Bock-W board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * based on r8a7779 - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7778.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "bockw"; - compatible = "renesas,bockw-reference", "renesas,r8a7778"; - - aliases { - serial0 = &scif0; - }; - - chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; - stdout-path = &scif0; - }; - - memory { - device_type = "memory"; - reg = <0x60000000 0x10000000>; - }; - - fixedregulator3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ethernet@18300000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x18300000 0x1000>; - - phy-mode = "mii"; - interrupt-parent = <&irqpin>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - vddvario-supply = <&fixedregulator3v3>; - vdd33a-supply = <&fixedregulator3v3>; - }; - -}; - -&mmcif { - pinctrl-0 = <&mmc_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <8>; - broken-cd; - status = "okay"; -}; - -&irqpin { - status = "okay"; -}; - -&tmu0 { - status = "okay"; -}; - -&pfc { - scif0_pins: serial0 { - renesas,groups = "scif0_data_a", "scif0_ctrl"; - renesas,function = "scif0"; - }; - - mmc_pins: mmc { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", - "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - hspi0_pins: hspi0 { - renesas,groups = "hspi0_a"; - renesas,function = "hspi0"; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <4>; - status = "okay"; - wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; -}; - -&hspi0 { - pinctrl-0 = <&hspi0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25fl008k", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - m25p,fast-read; - - partition@0 { - label = "data(spi)"; - reg = <0x00000000 0x00100000>; - }; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig deleted file mode 100644 index 3125e00f05ab..000000000000 --- a/arch/arm/configs/bockw_defconfig +++ /dev/null @@ -1,133 +0,0 @@ -# CONFIG_ARM_PATCH_PHYS_VIRT is not set -CONFIG_KERNEL_LZMA=y -CONFIG_NO_HZ=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R8A7778=y -CONFIG_MACH_BOCKW=y -CONFIG_MEMORY_START=0x60000000 -CONFIG_MEMORY_SIZE=0x10000000 -CONFIG_SHMOBILE_TIMER_HZ=1024 -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_EM_TIMER_STI is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_458693=y -CONFIG_ARM_ERRATA_460075=y -CONFIG_ARM_ERRATA_743622=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_SMSC911X=y -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=6 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_I2C=y -CONFIG_I2C_RCAR=y -CONFIG_GPIO_RCAR=y -CONFIG_REGULATOR=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y -CONFIG_VIDEO_RCAR_VIN=y -# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -CONFIG_VIDEO_ML86V7667=y -CONFIG_SPI=y -CONFIG_SPI_SH_HSPI=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_RCAR=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_RCAR_PHY=y -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_RX8581=y -CONFIG_DMADEVICES=y -CONFIG_RCAR_HPB_DMAE=y -CONFIG_UIO=y -CONFIG_UIO_PDRV_GENIRQ=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_AVERAGE=y diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 61c04b02faeb..9d479b2ea40d 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -71,7 +71,7 @@ int psci_cpu_disable(unsigned int cpu) return 0; } -void __ref psci_cpu_die(unsigned int cpu) +void psci_cpu_die(unsigned int cpu) { u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT; @@ -83,7 +83,7 @@ void __ref psci_cpu_die(unsigned int cpu) panic("psci: cpu %d failed to shutdown\n", cpu); } -int __ref psci_cpu_kill(unsigned int cpu) +int psci_cpu_kill(unsigned int cpu) { int err, i; diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 5a7e47ceec91..c169cc3049aa 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -19,6 +19,7 @@ #include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of_address.h> #include <linux/err.h> @@ -265,7 +266,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node, return 0; } -#define EXYNOS_PMU_IRQ(symbol, name) OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init) +#define EXYNOS_PMU_IRQ(symbol, name) IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init) EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu"); EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu"); diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 10bf7159b27d..8e7976a4c3e7 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -271,12 +272,7 @@ static int __init imx_gpc_init(struct device_node *node, return 0; } - -/* - * We cannot use the IRQCHIP_DECLARE macro that lives in - * drivers/irqchip, so we're forced to roll our own. Not very nice. - */ -OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); +IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); void __init imx_gpc_check_dt(void) { diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 9f739f3cad4c..1648edd515a2 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -22,7 +22,6 @@ #include <linux/dma-mapping.h> #include <linux/memblock.h> #include <linux/mbus.h> -#include <linux/signal.h> #include <linux/slab.h> #include <linux/irqchip.h> #include <asm/hardware/cache-l2x0.h> @@ -105,27 +104,6 @@ static void __init mvebu_memblock_reserve(void) static void __init mvebu_memblock_reserve(void) {} #endif -/* - * Early versions of Armada 375 SoC have a bug where the BootROM - * leaves an external data abort pending. The kernel is hit by this - * data abort as soon as it enters userspace, because it unmasks the - * data aborts at this moment. We register a custom abort handler - * below to ignore the first data abort to work around this - * problem. - */ -static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) -{ - static int ignore_first; - - if (!ignore_first && fsr == 0x1406) { - ignore_first = 1; - return 0; - } - - return 1; -} - static void __init mvebu_init_irq(void) { irqchip_init(); @@ -134,17 +112,6 @@ static void __init mvebu_init_irq(void) BUG_ON(mvebu_mbus_dt_init(coherency_available())); } -static void __init external_abort_quirk(void) -{ - u32 dev, rev; - - if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) - return; - - hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, - "imprecise external abort"); -} - static void __init i2c_quirk(void) { struct device_node *np; @@ -177,8 +144,6 @@ static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("marvell,armadaxp")) i2c_quirk(); - if (of_machine_is_compatible("marvell,a375-db")) - external_abort_quirk(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index e8fdb9ceedf0..9658b5a11e38 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -296,11 +296,11 @@ int armada_370_xp_pmsu_idle_enter(unsigned long deepidle) /* Test the CR_C bit and set it if it was cleared */ asm volatile( "mrc p15, 0, r0, c1, c0, 0 \n\t" - "tst r0, #(1 << 2) \n\t" + "tst r0, %0 \n\t" "orreq r0, r0, #(1 << 2) \n\t" "mcreq p15, 0, r0, c1, c0, 0 \n\t" "isb " - : : : "r0"); + : : "Ir" (CR_C) : "r0"); pr_debug("Failed to suspend the system\n"); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index cdd05f2e67ee..afb809509140 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -90,13 +90,6 @@ config MACH_OMAP_FSAMPLE Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board. -config MACH_VOICEBLUE - bool "Voiceblue" - depends on ARCH_OMAP1 && ARCH_OMAP15XX - help - Support for Voiceblue GSM/VoIP gateway. Say Y here if you have - such a board. - config MACH_OMAP_PALMTE bool "Palm Tungsten E" depends on ARCH_OMAP1 && ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 3889b6cd211e..0e8ea95ea822 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \ board-nand.o -obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c deleted file mode 100644 index e960687d0cb1..000000000000 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * linux/arch/arm/mach-omap1/board-voiceblue.c - * - * Modified from board-generic.c - * - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mtd/physmap.h> -#include <linux/notifier.h> -#include <linux/reboot.h> -#include <linux/serial_8250.h> -#include <linux/serial_reg.h> -#include <linux/smc91x.h> -#include <linux/export.h> -#include <linux/reboot.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/board-voiceblue.h> -#include <mach/flash.h> -#include <mach/mux.h> -#include <mach/tc.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - -#include "common.h" - -static struct plat_serial8250_port voiceblue_ports[] = { - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, -}; - -static int __init ext_uart_init(void) -{ - if (!machine_is_voiceblue()) - return -ENODEV; - - voiceblue_ports[0].irq = gpio_to_irq(12); - voiceblue_ports[1].irq = gpio_to_irq(13); - voiceblue_ports[2].irq = gpio_to_irq(14); - voiceblue_ports[3].irq = gpio_to_irq(15); - serial_device.dev.platform_data = voiceblue_ports; - return platform_device_register(&serial_device); -} -arch_initcall(ext_uart_init); - -static struct physmap_flash_data voiceblue_flash_data = { - .width = 2, - .set_vpp = omap1_set_vpp, -}; - -static struct resource voiceblue_flash_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device voiceblue_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &voiceblue_flash_data, - }, - .num_resources = 1, - .resource = &voiceblue_flash_resource, -}; - -static struct smc91x_platdata voiceblue_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource voiceblue_smc91x_resources[] = { - [0] = { - .start = OMAP_CS2_PHYS + 0x300, - .end = OMAP_CS2_PHYS + 0x300 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device voiceblue_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &voiceblue_smc91x_info, - }, - .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), - .resource = voiceblue_smc91x_resources, -}; - -static struct platform_device *voiceblue_devices[] __initdata = { - &voiceblue_flash_device, - &voiceblue_smc91x_device, -}; - -static struct omap_usb_config voiceblue_usb_config __initdata = { - .hmc_mode = 3, - .register_host = 1, - .register_dev = 1, - .pins[0] = 2, - .pins[1] = 6, - .pins[2] = 6, -}; - -#define MACHINE_PANICED 1 -#define MACHINE_REBOOTING 2 -#define MACHINE_REBOOT 4 -static unsigned long machine_state; - -static int panic_event(struct notifier_block *this, unsigned long event, - void *ptr) -{ - if (test_and_set_bit(MACHINE_PANICED, &machine_state)) - return NOTIFY_DONE; - - /* Flash power LED */ - omap_writeb(0x78, OMAP_LPG1_LCR); - omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */ - - return NOTIFY_DONE; -} - -static struct notifier_block panic_block = { - .notifier_call = panic_event, -}; - -static int __init voiceblue_setup(void) -{ - if (!machine_is_voiceblue()) - return -ENODEV; - - /* Setup panic notifier */ - atomic_notifier_chain_register(&panic_notifier_list, &panic_block); - - return 0; -} -postcore_initcall(voiceblue_setup); - -static int wdt_gpio_state; - -void voiceblue_wdt_enable(void) -{ - gpio_direction_output(0, 0); - gpio_set_value(0, 1); - gpio_set_value(0, 0); - wdt_gpio_state = 0; -} - -void voiceblue_wdt_disable(void) -{ - gpio_set_value(0, 0); - gpio_set_value(0, 1); - gpio_set_value(0, 0); - gpio_direction_input(0); -} - -void voiceblue_wdt_ping(void) -{ - if (test_bit(MACHINE_REBOOT, &machine_state)) - return; - - wdt_gpio_state = !wdt_gpio_state; - gpio_set_value(0, wdt_gpio_state); -} - -static void voiceblue_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 - * "Global Software Reset Affects Traffic Controller Frequency". - */ - if (cpu_is_omap5912()) { - omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL); - omap_writew(0x8, ARM_RSTCT1); - } - - set_bit(MACHINE_REBOOT, &machine_state); - voiceblue_wdt_enable(); - while (1) ; -} - -EXPORT_SYMBOL(voiceblue_wdt_enable); -EXPORT_SYMBOL(voiceblue_wdt_disable); -EXPORT_SYMBOL(voiceblue_wdt_ping); - -static void __init voiceblue_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - /* Watchdog */ - gpio_request(0, "Watchdog"); - /* smc91x reset */ - gpio_request(7, "SMC91x reset"); - gpio_direction_output(7, 1); - udelay(2); /* wait at least 100ns */ - gpio_set_value(7, 0); - mdelay(50); /* 50ms until PHY ready */ - /* smc91x interrupt pin */ - gpio_request(8, "SMC91x irq"); - /* 16C554 reset*/ - gpio_request(6, "16C554 reset"); - gpio_direction_output(6, 0); - /* 16C554 interrupt pins */ - gpio_request(12, "16C554 irq"); - gpio_request(13, "16C554 irq"); - gpio_request(14, "16C554 irq"); - gpio_request(15, "16C554 irq"); - irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); - - voiceblue_smc91x_resources[1].start = gpio_to_irq(8); - voiceblue_smc91x_resources[1].end = gpio_to_irq(8); - platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_serial_init(); - omap1_usb_init(&voiceblue_usb_config); - omap_register_i2c_bus(1, 100, NULL, 0); - - /* There is a good chance board is going up, so enable power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); - omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ -} - -MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") - /* Maintainer: Ladislav Michl <michl@2n.cz> */ - .atag_offset = 0x100, - .map_io = omap15xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = voiceblue_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = voiceblue_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h deleted file mode 100644 index 27916b210f57..000000000000 --- a/arch/arm/mach-omap1/include/mach/board-voiceblue.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * Hardware definitions for OMAP5910 based VoiceBlue board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VOICEBLUE_H -#define __ASM_ARCH_VOICEBLUE_H - -extern void voiceblue_wdt_enable(void); -extern void voiceblue_wdt_disable(void); -extern void voiceblue_wdt_ping(void); - -#endif /* __ASM_ARCH_VOICEBLUE_H */ - diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ddf912406ce8..5076d3f334d2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -97,6 +97,7 @@ config ARCH_OMAP2PLUS select PINCTRL select SOC_BUS select OMAP_IRQCHIP + select CLKSRC_TI_32K help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 935869698cbc..ceefcee6bb85 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -48,11 +48,9 @@ AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) # Functions loaded to SRAM obj-$(CONFIG_SOC_OMAP2420) += sram242x.o obj-$(CONFIG_SOC_OMAP2430) += sram243x.o -obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o AFLAGS_sram242x.o :=-Wa,-march=armv6 AFLAGS_sram243x.o :=-Wa,-march=armv6 -AFLAGS_sram34xx.o :=-Wa,-march=armv7-a # Restart code (OMAP4/5 currently in omap4-common.c) obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o @@ -186,7 +184,6 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) -obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) obj-$(CONFIG_SOC_AM33XX) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += $(clock-common) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index fb219a30c10c..04a56cc04dfa 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -46,7 +46,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_machine = omap_generic_init, - .init_time = omap2_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap242x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -63,7 +63,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .map_io = omap243x_map_io, .init_early = omap2430_init_early, .init_machine = omap_generic_init, - .init_time = omap2_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap243x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -82,7 +82,7 @@ DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = n900_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -117,7 +117,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") .init_early = omap3630_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap36xx_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -276,7 +276,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap3_gptimer_timer_init, + .init_time = omap4_local_timer_init, .dt_compat = am43_boards_compat, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c2975af4cd5d..d9c3ffc39329 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -424,6 +424,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, .init_late = omap3430_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 2d1e5a6beb85..41161ca97d74 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -136,6 +136,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .init_irq = omap3_init_irq, .init_machine = rx51_init, .init_late = omap3430_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c deleted file mode 100644 index 3f6521313c93..000000000000 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * OMAP34xx M2 divider clock code - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2010 Nokia Corporation - * - * Paul Walmsley - * Jouni Högander - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock3xxx.h" -#include "sdrc.h" -#include "sram.h" - -#define CYCLES_PER_MHZ 1000000 - -struct clk *sdrc_ick_p, *arm_fck_p; - -/* - * CORE DPLL (DPLL3) M2 divider rate programming functions - * - * These call into SRAM code to do the actual CM writes, since the SDRAM - * is clocked from DPLL3. - */ - -/** - * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate - * - * Program the DPLL M2 divider with the rounded target rate. Returns - * -EINVAL upon error, or 0 upon success. - */ -int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 new_div = 0; - u32 unlock_dll = 0; - u32 c; - unsigned long validrate, sdrcrate, _mpurate; - struct omap_sdrc_params *sdrc_cs0; - struct omap_sdrc_params *sdrc_cs1; - int ret; - unsigned long clkrate; - - if (!clk || !rate) - return -EINVAL; - - new_div = DIV_ROUND_UP(parent_rate, rate); - validrate = parent_rate / new_div; - - if (validrate != rate) - return -EINVAL; - - sdrcrate = clk_get_rate(sdrc_ick_p); - clkrate = clk_hw_get_rate(hw); - if (rate > clkrate) - sdrcrate <<= ((rate / clkrate) >> 1); - else - sdrcrate >>= ((clkrate / rate) >> 1); - - ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); - if (ret) - return -EINVAL; - - if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { - pr_debug("clock: will unlock SDRC DLL\n"); - unlock_dll = 1; - } - - /* - * XXX This only needs to be done when the CPU frequency changes - */ - _mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; - c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; - c += 1; /* for safety */ - c *= SDRC_MPURATE_LOOPS; - c >>= SDRC_MPURATE_SCALE; - if (c == 0) - c = 1; - - pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", - clkrate, validrate); - pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); - if (sdrc_cs1) - pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - - if (sdrc_cs1) - omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clkrate, - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - else - omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clkrate, - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, - 0, 0, 0, 0); - return 0; -} - diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 92e92cfc2775..0cba9575d2ca 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -88,8 +88,7 @@ static inline int omap_mux_late_init(void) extern void omap2_init_common_infrastructure(void); -extern void omap2_sync32k_timer_init(void); -extern void omap3_sync32k_timer_init(void); +extern void omap_init_time(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index a69bd67e9028..9374da313e8e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -33,7 +33,6 @@ #include "common.h" #include "mux.h" #include "control.h" -#include "devices.h" #include "display.h" #define L3_MODULES_MAX_LEN 12 @@ -67,58 +66,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_IOMMU_API) - -#include <linux/platform_data/iommu-omap.h> - -static struct resource omap3isp_resources[] = { - { - .start = OMAP3430_ISP_BASE, - .end = OMAP3430_ISP_BASE + 0x12fc, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP3430_ISP_BASE2, - .end = OMAP3430_ISP_BASE2 + 0x0600, - .flags = IORESOURCE_MEM, - }, - { - .start = 24 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device omap3isp_device = { - .name = "omap3isp", - .id = -1, - .num_resources = ARRAY_SIZE(omap3isp_resources), - .resource = omap3isp_resources, -}; - -static struct omap_iommu_arch_data omap3_isp_iommu = { - .name = "mmu_isp", -}; - -int omap3_init_camera(struct isp_platform_data *pdata) -{ - if (of_have_populated_dt()) - omap3_isp_iommu.name = "480bd400.mmu"; - - omap3isp_device.dev.platform_data = pdata; - omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu; - - return platform_device_register(&omap3isp_device); -} - -#else /* !CONFIG_IOMMU_API */ - -int omap3_init_camera(struct isp_platform_data *pdata) -{ - return 0; -} - -#endif - #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { diff --git a/arch/arm/mach-omap2/devices.h b/arch/arm/mach-omap2/devices.h deleted file mode 100644 index f61eb6e5d136..000000000000 --- a/arch/arm/mach-omap2/devices.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-omap2/devices.h - * - * OMAP2 platform device setup/initialization - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H -#define __ARCH_ARM_MACH_OMAP_DEVICES_H - -struct isp_platform_data; - -int omap3_init_camera(struct isp_platform_data *pdata); - -#endif diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 54a5ba54d2ff..8a2ae82cb227 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -57,15 +57,15 @@ int omap_type(void) if (val < OMAP2_DEVICETYPE_MASK) return val; - if (cpu_is_omap24xx()) { + if (soc_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); - } else if (cpu_is_ti81xx()) { + } else if (soc_is_ti81xx()) { val = omap_ctrl_readl(TI81XX_CONTROL_STATUS); } else if (soc_is_am33xx() || soc_is_am43xx()) { val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); - } else if (cpu_is_omap34xx()) { + } else if (soc_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); - } else if (cpu_is_omap44xx()) { + } else if (soc_is_omap44xx()) { val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS); } else if (soc_is_omap54xx() || soc_is_dra7xx()) { val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS); @@ -122,7 +122,7 @@ static u16 tap_prod_id; void omap_get_die_id(struct omap_die_id *odi) { - if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) { + if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) { odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0); odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1); odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2); @@ -218,17 +218,17 @@ static void __init omap3_cpuinfo(void) * on available features. Upon detection, update the CPU id * and CPU class bits. */ - if (cpu_is_omap3630()) { + if (soc_is_omap3630()) { cpu_name = "OMAP3630"; } else if (soc_is_am35xx()) { cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; - } else if (cpu_is_ti816x()) { + } else if (soc_is_ti816x()) { cpu_name = "TI816X"; } else if (soc_is_am335x()) { cpu_name = "AM335X"; } else if (soc_is_am437x()) { cpu_name = "AM437x"; - } else if (cpu_is_ti814x()) { + } else if (soc_is_ti814x()) { cpu_name = "TI814X"; } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ @@ -275,11 +275,11 @@ void __init omap3xxx_check_features(void) OMAP3_CHECK_FEATURE(status, SGX); OMAP3_CHECK_FEATURE(status, NEON); OMAP3_CHECK_FEATURE(status, ISP); - if (cpu_is_omap3630()) + if (soc_is_omap3630()) omap_features |= OMAP3_HAS_192MHZ_CLK; - if (cpu_is_omap3430() || cpu_is_omap3630()) + if (soc_is_omap3430() || soc_is_omap3630()) omap_features |= OMAP3_HAS_IO_WAKEUP; - if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || + if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || omap_rev() == OMAP3430_REV_ES3_1_2) omap_features |= OMAP3_HAS_IO_CHAIN_CTRL; @@ -701,7 +701,7 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap) tap_base = tap; /* XXX What is this intended to do? */ - if (cpu_is_omap34xx()) + if (soc_is_omap34xx()) tap_prod_id = 0x0210; else tap_prod_id = 0x0208; @@ -719,11 +719,11 @@ static const char * const omap_types[] = { static const char * __init omap_get_family(void) { - if (cpu_is_omap24xx()) + if (soc_is_omap24xx()) return kasprintf(GFP_KERNEL, "OMAP2"); - else if (cpu_is_omap34xx()) + else if (soc_is_omap34xx()) return kasprintf(GFP_KERNEL, "OMAP3"); - else if (cpu_is_omap44xx()) + else if (soc_is_omap44xx()) return kasprintf(GFP_KERNEL, "OMAP4"); else if (soc_is_omap54xx()) return kasprintf(GFP_KERNEL, "OMAP5"); diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 971791fe9a3f..593fec753b28 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -27,7 +27,7 @@ * platform-specific code to shutdown a CPU * Called with IRQs disabled */ -void __ref omap4_cpu_die(unsigned int cpu) +void omap4_cpu_die(unsigned int cpu) { unsigned int boot_cpu = 0; void __iomem *base = omap_get_wakeupgen_base(); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index db7e0bab3587..f397bd6bd6e3 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of_address.h> #include <linux/platform_device.h> @@ -330,7 +331,7 @@ static int irq_cpu_hotplug_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __refdata irq_hotplug_notifier = { +static struct notifier_block irq_hotplug_notifier = { .notifier_call = irq_cpu_hotplug_notify, }; @@ -540,9 +541,4 @@ static int __init wakeupgen_init(struct device_node *node, return 0; } - -/* - * We cannot use the IRQCHIP_DECLARE macro that lives in - * drivers/irqchip, so we're forced to roll our own. Not very nice. - */ -OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init); +IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index 8f5989d48a80..1c210cb2b8c1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -152,20 +152,10 @@ struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = { - { - .pa_start = 0x48080000, - .pa_end = 0x48080000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - struct omap_hwmod_ocp_if am33xx_l4_ls__elm = { .master = &am33xx_l4_ls_hwmod, .slave = &am33xx_elm_hwmod, .clk = "l4ls_gclk", - .addr = am33xx_elm_addr_space, .user = OCP_USER_MPU, }; @@ -285,20 +275,10 @@ struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = { }; /* l3s cfg -> gpmc */ -static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = { - { - .pa_start = 0x50000000, - .pa_end = 0x50000000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .master = &am33xx_l3_s_hwmod, .slave = &am33xx_gpmc_hwmod, .clk = "l3s_gclk", - .addr = am33xx_gpmc_addr_space, .user = OCP_USER_MPU, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index dc55f8dedf2c..aff78d5198d2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -26,7 +26,6 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/iommu-omap.h> -#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "soc.h" @@ -1506,26 +1505,9 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { .sysc = &omap3xxx_mailbox_sysc, }; -static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = { - { .name = "dsp", .tx_id = 0, .rx_id = 1 }, -}; - -static struct omap_mbox_pdata omap3xxx_mailbox_attrs = { - .num_users = 2, - .num_fifos = 2, - .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info), - .info = omap3xxx_mailbox_info, -}; - -static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { - { .irq = 26 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap3xxx_mailbox_hwmod = { .name = "mailbox", .class = &omap3xxx_mailbox_hwmod_class, - .mpu_irqs = omap3xxx_mailbox_irqs, .main_clk = "mailboxes_ick", .prcm = { .omap2 = { @@ -1536,7 +1518,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, }, }, - .dev_attr = &omap3xxx_mailbox_attrs, }; /* @@ -3276,20 +3257,10 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = { - { - .pa_start = 0x48094000, - .pa_end = 0x480941ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_core -> mailbox */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mailbox_hwmod, - .addr = omap3xxx_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 43eebf2c59e2..a5e444b1e57a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4471,21 +4471,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = { - { - .pa_start = 0x4a0f6000, - .pa_end = 0x4a0f6fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> spinlock */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_spinlock_hwmod, .clk = "l4_div_ck", - .addr = omap44xx_spinlock_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 7c3fac035e93..8cdfd9b7ab4f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1844,8 +1844,7 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_RESET_STATUS), + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART | MSTANDBY_SMART_WKUP), diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 562247bced49..51d1ecb384bd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2566,21 +2566,11 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = { - { - .pa_start = 0x48078000, - .pa_end = 0x48078fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_per1 -> elm */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = { .master = &dra7xx_l4_per1_hwmod, .slave = &dra7xx_elm_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_elm_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2648,21 +2638,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = { - { - .pa_start = 0x50000000, - .pa_end = 0x500003ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l3_main_1 -> gpmc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .master = &dra7xx_l3_main_1_hwmod, .slave = &dra7xx_gpmc_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_gpmc_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3029,21 +3009,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = { - { - .pa_start = 0x4a0f6000, - .pa_end = 0x4a0f6fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> spinlock */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = { .master = &dra7xx_l4_cfg_hwmod, .slave = &dra7xx_spinlock_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_spinlock_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index d697cecf762b..178e22c146b7 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -210,7 +210,7 @@ static inline int omap4plus_init_static_deps(const struct static_dep_map *map) } map++; - }; + } return 0; } diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index d31c495175c1..2e00c7f1f471 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -582,7 +582,7 @@ void __init omap3xxx_powerdomains_init(void) /* Only 81xx needs custom pwrdm_operations */ if (!cpu_is_ti81xx()) - pwrdm_register_platform_funcs(&omap3_pwrdm_operations);; + pwrdm_register_platform_funcs(&omap3_pwrdm_operations); rev = omap_rev(); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 2d1d3845253c..79ca3c3eb2af 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -129,9 +129,9 @@ int omap_type(void); /* * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + * SoC id bits (0730, 1510, 1710, 2422...) [31:16] + * SoC revision (See _REV_ defined in cpu.h) [15:08] + * SoC class bits (15xx, 16xx, 24xx, 34xx...) [07:00] */ unsigned int omap_rev(void); @@ -141,20 +141,20 @@ static inline int soc_is_omap(void) } /* - * Get the CPU revision for OMAP devices + * Get the SoC revision for OMAP devices */ #define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) /* * Macros to group OMAP into cpu classes. * These can be used in most places. - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 - * cpu_is_omap447x(): True for OMAP4470 + * soc_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * soc_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * soc_is_omap243x(): True for OMAP2430 + * soc_is_omap343x(): True for OMAP3430 + * soc_is_omap443x(): True for OMAP4430 + * soc_is_omap446x(): True for OMAP4460 + * soc_is_omap447x(): True for OMAP4470 * soc_is_omap543x(): True for OMAP5430, OMAP5432 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -225,23 +225,23 @@ IS_TI_SUBCLASS(814x, 0x814) IS_AM_SUBCLASS(335x, 0x335) IS_AM_SUBCLASS(437x, 0x437) -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_ti81xx() 0 -#define cpu_is_ti816x() 0 -#define cpu_is_ti814x() 0 +#define soc_is_omap24xx() 0 +#define soc_is_omap242x() 0 +#define soc_is_omap243x() 0 +#define soc_is_omap34xx() 0 +#define soc_is_omap343x() 0 +#define soc_is_ti81xx() 0 +#define soc_is_ti816x() 0 +#define soc_is_ti814x() 0 #define soc_is_am35xx() 0 #define soc_is_am33xx() 0 #define soc_is_am335x() 0 #define soc_is_am43xx() 0 #define soc_is_am437x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 -#define cpu_is_omap447x() 0 +#define soc_is_omap44xx() 0 +#define soc_is_omap443x() 0 +#define soc_is_omap446x() 0 +#define soc_is_omap447x() 0 #define soc_is_omap54xx() 0 #define soc_is_omap543x() 0 #define soc_is_dra7xx() 0 @@ -250,54 +250,54 @@ IS_AM_SUBCLASS(437x, 0x437) #if defined(MULTI_OMAP2) # if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() is_omap24xx() +# undef soc_is_omap24xx +# define soc_is_omap24xx() is_omap24xx() # endif # if defined (CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() is_omap242x() +# undef soc_is_omap242x +# define soc_is_omap242x() is_omap242x() # endif # if defined (CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() is_omap243x() +# undef soc_is_omap243x +# define soc_is_omap243x() is_omap243x() # endif # if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() +# undef soc_is_omap34xx +# undef soc_is_omap343x +# define soc_is_omap34xx() is_omap34xx() +# define soc_is_omap343x() is_omap343x() # endif #else # if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 +# undef soc_is_omap24xx +# define soc_is_omap24xx() 1 # endif # if defined(CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 +# undef soc_is_omap242x +# define soc_is_omap242x() 1 # endif # if defined(CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 +# undef soc_is_omap243x +# define soc_is_omap243x() 1 # endif # if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 +# undef soc_is_omap34xx +# define soc_is_omap34xx() 1 # endif # if defined(CONFIG_SOC_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 +# undef soc_is_omap343x +# define soc_is_omap343x() 1 # endif #endif /* * Macros to detect individual cpu types. * These are only rarely needed. - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 + * soc_is_omap2420(): True for OMAP2420 + * soc_is_omap2422(): True for OMAP2422 + * soc_is_omap2423(): True for OMAP2423 + * soc_is_omap2430(): True for OMAP2430 + * soc_is_omap3430(): True for OMAP3430 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -313,51 +313,51 @@ IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 -#define cpu_is_omap3630() 0 +#define soc_is_omap2420() 0 +#define soc_is_omap2422() 0 +#define soc_is_omap2423() 0 +#define soc_is_omap2430() 0 +#define soc_is_omap3430() 0 +#define soc_is_omap3630() 0 #define soc_is_omap5430() 0 /* These are needed for the common code */ #ifdef CONFIG_ARCH_OMAP2PLUS -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 +#define soc_is_omap7xx() 0 +#define soc_is_omap15xx() 0 +#define soc_is_omap16xx() 0 +#define soc_is_omap1510() 0 +#define soc_is_omap1610() 0 +#define soc_is_omap1611() 0 +#define soc_is_omap1621() 0 +#define soc_is_omap1710() 0 #define cpu_class_is_omap1() 0 #define cpu_class_is_omap2() 1 #endif #if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() +# undef soc_is_omap2420 +# undef soc_is_omap2422 +# undef soc_is_omap2423 +# undef soc_is_omap2430 +# define soc_is_omap2420() is_omap2420() +# define soc_is_omap2422() is_omap2422() +# define soc_is_omap2423() is_omap2423() +# define soc_is_omap2430() is_omap2430() #endif #if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap3430 -# undef cpu_is_ti81xx -# undef cpu_is_ti816x -# undef cpu_is_ti814x +# undef soc_is_omap3430 +# undef soc_is_ti81xx +# undef soc_is_ti816x +# undef soc_is_ti814x # undef soc_is_am35xx -# define cpu_is_omap3430() is_omap3430() -# undef cpu_is_omap3630 -# define cpu_is_omap3630() is_omap363x() -# define cpu_is_ti81xx() is_ti81xx() -# define cpu_is_ti816x() is_ti816x() -# define cpu_is_ti814x() is_ti814x() +# define soc_is_omap3430() is_omap3430() +# undef soc_is_omap3630 +# define soc_is_omap3630() is_omap363x() +# define soc_is_ti81xx() is_ti81xx() +# define soc_is_ti816x() is_ti816x() +# define soc_is_ti814x() is_ti814x() # define soc_is_am35xx() is_am35xx() #endif @@ -376,14 +376,14 @@ IS_OMAP_TYPE(3430, 0x3430) #endif # if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# undef cpu_is_omap446x -# undef cpu_is_omap447x -# define cpu_is_omap44xx() is_omap44xx() -# define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() -# define cpu_is_omap447x() is_omap447x() +# undef soc_is_omap44xx +# undef soc_is_omap443x +# undef soc_is_omap446x +# undef soc_is_omap447x +# define soc_is_omap44xx() is_omap44xx() +# define soc_is_omap443x() is_omap443x() +# define soc_is_omap446x() is_omap446x() +# define soc_is_omap447x() is_omap447x() # endif # if defined(CONFIG_SOC_OMAP5) @@ -556,5 +556,22 @@ level(__##fn); #define omap_late_initcall(fn) omap_initcall(late_initcall, fn) #define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn) -#endif /* __ASSEMBLY__ */ +/* Legacy defines, these can be removed when users are removed */ +#define cpu_is_omap2420() soc_is_omap2420() +#define cpu_is_omap2422() soc_is_omap2422() +#define cpu_is_omap242x() soc_is_omap242x() +#define cpu_is_omap2430() soc_is_omap2430() +#define cpu_is_omap243x() soc_is_omap243x() +#define cpu_is_omap24xx() soc_is_omap24xx() +#define cpu_is_omap3430() soc_is_omap3430() +#define cpu_is_omap343x() soc_is_omap343x() +#define cpu_is_omap34xx() soc_is_omap34xx() +#define cpu_is_omap3630() soc_is_omap3630() +#define cpu_is_omap443x() soc_is_omap443x() +#define cpu_is_omap446x() soc_is_omap446x() +#define cpu_is_omap44xx() soc_is_omap44xx() +#define cpu_is_ti814x() soc_is_ti814x() +#define cpu_is_ti816x() soc_is_ti816x() +#define cpu_is_ti81xx() soc_is_ti81xx() +#endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index cd488b80ba36..83d0e61f49e6 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -211,35 +211,10 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - void omap3_sram_restore_context(void) { omap_sram_reset(); - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); omap_push_sram_idle(); } diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h index 948d3edefc38..18dc884267fa 100644 --- a/arch/arm/mach-omap2/sram.h +++ b/arch/arm/mach-omap2/sram.h @@ -15,12 +15,6 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern void omap3_sram_restore_context(void); /* Do not use these */ @@ -52,14 +46,6 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - #ifdef CONFIG_PM extern void omap_push_sram_idle(void); #else diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S deleted file mode 100644 index 1446331b576a..000000000000 --- a/arch/arm/mach-omap2/sram34xx.S +++ /dev/null @@ -1,346 +0,0 @@ -/* - * linux/arch/arm/mach-omap3/sram.S - * - * Omap3 specific functions that need to be run in internal SRAM - * - * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc. - * Copyright (C) 2008 Nokia Corporation - * - * Rajendra Nayak <rnayak@ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <linux/linkage.h> - -#include <asm/assembler.h> - -#include "soc.h" -#include "iomap.h" -#include "sdrc.h" -#include "cm3xxx.h" - -/* - * This file needs be built unconditionally as ARM to interoperate correctly - * with non-Thumb-2-capable firmware. - */ - .arm - - .text - -/* r1 parameters */ -#define SDRC_NO_UNLOCK_DLL 0x0 -#define SDRC_UNLOCK_DLL 0x1 - -/* SDRC_DLLA_CTRL bit settings */ -#define FIXEDDELAY_SHIFT 24 -#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT) -#define DLLIDLE_MASK 0x4 - -/* - * SDRC_DLLA_CTRL default values: TI hardware team indicates that - * FIXEDDELAY should be initialized to 0xf. This apparently was - * empirically determined during process testing, so no derivation - * was provided. - */ -#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT) - -/* SDRC_DLLA_STATUS bit settings */ -#define LOCKSTATUS_MASK 0x4 - -/* SDRC_POWER bit settings */ -#define SRFRONIDLEREQ_MASK 0x40 - -/* CM_IDLEST1_CORE bit settings */ -#define ST_SDRC_MASK 0x2 - -/* CM_ICLKEN1_CORE bit settings */ -#define EN_SDRC_MASK 0x2 - -/* CM_CLKSEL1_PLL bit settings */ -#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b - -/* - * omap3_sram_configure_core_dpll - change DPLL3 M2 divider - * - * Params passed in registers: - * r0 = new M2 divider setting (only 1 and 2 supported right now) - * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for - * SDRC rates < 83MHz - * r2 = number of MPU cycles to wait for SDRC to stabilize after - * reprogramming the SDRC when switching to a slower MPU speed - * r3 = increasing SDRC rate? (1 = yes, 0 = no) - * - * Params passed via the stack. The needed params will be copied in SRAM - * before use by the code in SRAM (SDRAM is not accessible during SDRC - * reconfiguration): - * new SDRC_RFR_CTRL_0 register contents - * new SDRC_ACTIM_CTRL_A_0 register contents - * new SDRC_ACTIM_CTRL_B_0 register contents - * new SDRC_MR_0 register value - * new SDRC_RFR_CTRL_1 register contents - * new SDRC_ACTIM_CTRL_A_1 register contents - * new SDRC_ACTIM_CTRL_B_1 register contents - * new SDRC_MR_1 register value - * - * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into - * the SDRC CS1 registers - * - * NOTE: This code no longer attempts to program the SDRC AC timing and MR - * registers. This is because the code currently cannot ensure that all - * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the - * SDRAM when the registers are written. If the registers are changed while - * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC - * may enter an unpredictable state. In the future, the intent is to - * re-enable this code in cases where we can ensure that no initiators are - * touching the SDRAM. Until that time, users who know that their use case - * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING - * option. - * - * Richard Woodruff notes that any changes to this code must be carefully - * audited and tested to ensure that they don't cause a TLB miss while - * the SDRAM is inaccessible. Such a situation will crash the system - * since it will cause the ARM MMU to attempt to walk the page tables. - * These crashes may be intermittent. - */ - .align 3 -ENTRY(omap3_sram_configure_core_dpll) - stmfd sp!, {r1-r12, lr} @ store regs to stack - - @ pull the extra args off the stack - @ and store them in SRAM - -/* - * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour - * in Thumb-2: use a r7 as a base instead. - * Be careful not to clobber r7 when maintaing this file. - */ - THUMB( adr r7, omap3_sram_configure_core_dpll ) - .macro strtext Rt:req, label:req - ARM( str \Rt, \label ) - THUMB( str \Rt, [r7, \label - omap3_sram_configure_core_dpll] ) - .endm - - ldr r4, [sp, #52] - strtext r4, omap_sdrc_rfr_ctrl_0_val - ldr r4, [sp, #56] - strtext r4, omap_sdrc_actim_ctrl_a_0_val - ldr r4, [sp, #60] - strtext r4, omap_sdrc_actim_ctrl_b_0_val - ldr r4, [sp, #64] - strtext r4, omap_sdrc_mr_0_val - ldr r4, [sp, #68] - strtext r4, omap_sdrc_rfr_ctrl_1_val - cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0, - beq skip_cs1_params @ do not use cs1 params - ldr r4, [sp, #72] - strtext r4, omap_sdrc_actim_ctrl_a_1_val - ldr r4, [sp, #76] - strtext r4, omap_sdrc_actim_ctrl_b_1_val - ldr r4, [sp, #80] - strtext r4, omap_sdrc_mr_1_val -skip_cs1_params: - mrc p15, 0, r8, c1, c0, 0 @ read ctrl register - bic r10, r8, #0x800 @ clear Z-bit, disable branch prediction - mcr p15, 0, r10, c1, c0, 0 @ write ctrl register - dsb @ flush buffered writes to interconnect - isb @ prevent speculative exec past here - cmp r3, #1 @ if increasing SDRC clk rate, - bleq configure_sdrc @ program the SDRC regs early (for RFR) - cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state - bleq unlock_dll - blne lock_dll - bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC - bl configure_core_dpll @ change the DPLL3 M2 divider - mov r12, r2 - bl wait_clk_stable @ wait for SDRC to stabilize - bl enable_sdrc @ take SDRC out of idle - cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change - bleq wait_dll_unlock - blne wait_dll_lock - cmp r3, #1 @ if increasing SDRC clk rate, - beq return_to_sdram @ return to SDRAM code, otherwise, - bl configure_sdrc @ reprogram SDRC regs now -return_to_sdram: - mcr p15, 0, r8, c1, c0, 0 @ restore ctrl register - isb @ prevent speculative exec past here - mov r0, #0 @ return value - ldmfd sp!, {r1-r12, pc} @ restore regs and return -unlock_dll: - ldr r11, omap3_sdrc_dlla_ctrl - ldr r12, [r11] - bic r12, r12, #FIXEDDELAY_MASK - orr r12, r12, #FIXEDDELAY_DEFAULT - orr r12, r12, #DLLIDLE_MASK - str r12, [r11] @ (no OCP barrier needed) - bx lr -lock_dll: - ldr r11, omap3_sdrc_dlla_ctrl - ldr r12, [r11] - bic r12, r12, #DLLIDLE_MASK - str r12, [r11] @ (no OCP barrier needed) - bx lr -sdram_in_selfrefresh: - ldr r11, omap3_sdrc_power @ read the SDRC_POWER register - ldr r12, [r11] @ read the contents of SDRC_POWER - mov r9, r12 @ keep a copy of SDRC_POWER bits - orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle - str r12, [r11] @ write back to SDRC_POWER register - ldr r12, [r11] @ posted-write barrier for SDRC -idle_sdrc: - ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg - ldr r12, [r11] - bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC - str r12, [r11] -wait_sdrc_idle: - ldr r11, omap3_cm_idlest1_core - ldr r12, [r11] - and r12, r12, #ST_SDRC_MASK @ check for SDRC idle - cmp r12, #ST_SDRC_MASK - bne wait_sdrc_idle - bx lr -configure_core_dpll: - ldr r11, omap3_cm_clksel1_pll - ldr r12, [r11] - ldr r10, core_m2_mask_val @ modify m2 for core dpll - and r12, r12, r10 - orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT - str r12, [r11] - ldr r12, [r11] @ posted-write barrier for CM - bx lr -wait_clk_stable: - subs r12, r12, #1 - bne wait_clk_stable - bx lr -enable_sdrc: - ldr r11, omap3_cm_iclken1_core - ldr r12, [r11] - orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC - str r12, [r11] -wait_sdrc_idle1: - ldr r11, omap3_cm_idlest1_core - ldr r12, [r11] - and r12, r12, #ST_SDRC_MASK - cmp r12, #0 - bne wait_sdrc_idle1 -restore_sdrc_power_val: - ldr r11, omap3_sdrc_power - str r9, [r11] @ restore SDRC_POWER, no barrier needed - bx lr -wait_dll_lock: - ldr r11, omap3_sdrc_dlla_status - ldr r12, [r11] - and r12, r12, #LOCKSTATUS_MASK - cmp r12, #LOCKSTATUS_MASK - bne wait_dll_lock - bx lr -wait_dll_unlock: - ldr r11, omap3_sdrc_dlla_status - ldr r12, [r11] - and r12, r12, #LOCKSTATUS_MASK - cmp r12, #0x0 - bne wait_dll_unlock - bx lr -configure_sdrc: - ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM - ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM - str r12, [r11] @ store -#ifdef CONFIG_OMAP3_SDRC_AC_TIMING - ldr r12, omap_sdrc_actim_ctrl_a_0_val - ldr r11, omap3_sdrc_actim_ctrl_a_0 - str r12, [r11] - ldr r12, omap_sdrc_actim_ctrl_b_0_val - ldr r11, omap3_sdrc_actim_ctrl_b_0 - str r12, [r11] - ldr r12, omap_sdrc_mr_0_val - ldr r11, omap3_sdrc_mr_0 - str r12, [r11] -#endif - ldr r12, omap_sdrc_rfr_ctrl_1_val - cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, - beq skip_cs1_prog @ do not program cs1 params - ldr r11, omap3_sdrc_rfr_ctrl_1 - str r12, [r11] -#ifdef CONFIG_OMAP3_SDRC_AC_TIMING - ldr r12, omap_sdrc_actim_ctrl_a_1_val - ldr r11, omap3_sdrc_actim_ctrl_a_1 - str r12, [r11] - ldr r12, omap_sdrc_actim_ctrl_b_1_val - ldr r11, omap3_sdrc_actim_ctrl_b_1 - str r12, [r11] - ldr r12, omap_sdrc_mr_1_val - ldr r11, omap3_sdrc_mr_1 - str r12, [r11] -#endif -skip_cs1_prog: - ldr r12, [r11] @ posted-write barrier for SDRC - bx lr - - .align -omap3_sdrc_power: - .word OMAP34XX_SDRC_REGADDR(SDRC_POWER) -omap3_cm_clksel1_pll: - .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1) -omap3_cm_idlest1_core: - .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) -omap3_cm_iclken1_core: - .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) - -omap3_sdrc_rfr_ctrl_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) -omap3_sdrc_rfr_ctrl_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1) -omap3_sdrc_actim_ctrl_a_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) -omap3_sdrc_actim_ctrl_a_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1) -omap3_sdrc_actim_ctrl_b_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) -omap3_sdrc_actim_ctrl_b_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1) -omap3_sdrc_mr_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) -omap3_sdrc_mr_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1) -omap_sdrc_rfr_ctrl_0_val: - .word 0xDEADBEEF -omap_sdrc_rfr_ctrl_1_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_a_0_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_a_1_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_b_0_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_b_1_val: - .word 0xDEADBEEF -omap_sdrc_mr_0_val: - .word 0xDEADBEEF -omap_sdrc_mr_1_val: - .word 0xDEADBEEF - -omap3_sdrc_dlla_status: - .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) -omap3_sdrc_dlla_ctrl: - .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) -core_m2_mask_val: - .word 0x07FFFFFF -ENDPROC(omap3_sram_configure_core_dpll) - -ENTRY(omap3_sram_configure_core_dpll_sz) - .word . - omap3_sram_configure_core_dpll - diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index bef41837bf7f..b18ebbefae09 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -183,7 +183,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id * of_get_property(np, "ti,timer-secure", NULL))) continue; - of_add_property(np, &device_disabled); + if (!of_device_is_compatible(np, "ti,omap-counter32k")) + of_add_property(np, &device_disabled); return np; } @@ -394,7 +395,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) int ret; struct device_node *np = NULL; struct omap_hwmod *oh; - void __iomem *vbase; const char *oh_name = "counter_32k"; /* @@ -420,18 +420,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - if (np) { - vbase = of_iomap(np, 0); - of_node_put(np); - } else { - vbase = omap_hwmod_get_mpu_rt_va(oh); - } - - if (!vbase) { - pr_warn("%s: failed to get counter_32k resource\n", __func__); - return -ENXIO; - } - ret = omap_hwmod_enable(oh); if (ret) { pr_warn("%s: failed to enable counter_32k module (%d)\n", @@ -439,13 +427,18 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) return ret; } - ret = omap_init_clocksource_32k(vbase); - if (ret) { - pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n", - __func__, ret); - omap_hwmod_idle(oh); - } + if (!of_have_populated_dt()) { + void __iomem *vbase; + + vbase = omap_hwmod_get_mpu_rt_va(oh); + ret = omap_init_clocksource_32k(vbase); + if (ret) { + pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n", + __func__, ret); + omap_hwmod_idle(oh); + } + } return ret; } @@ -476,7 +469,64 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, clocksource_gpt.name, clksrc.rate); } -#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER +static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src, + const char *clkev_prop, int clksrc_nr, const char *clksrc_src, + const char *clksrc_prop, bool gptimer) +{ + omap_clk_init(); + omap_dmtimer_init(); + omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop); + + /* Enable the use of clocksource="gp_timer" kernel parameter */ + if (use_gptimer_clksrc || gptimer) + omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src, + clksrc_prop); + else + omap2_sync32k_clocksource_init(); +} + +void __init omap_init_time(void) +{ + __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL, false); + + if (of_have_populated_dt()) + clocksource_probe(); +} + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) +void __init omap3_secure_sync32k_timer_init(void) +{ + __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure", + 2, "timer_sys_ck", NULL, false); +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +void __init omap3_gptimer_timer_init(void) +{ + __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, + 1, "timer_sys_ck", "ti,timer-alwon", true); +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) +static void __init omap4_sync32k_timer_init(void) +{ + __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", + 2, "sys_clkin_ck", NULL, false); +} + +void __init omap4_local_timer_init(void) +{ + omap4_sync32k_timer_init(); + clocksource_probe(); +} +#endif + +#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) + /* * The realtime counter also called master counter, is a free-running * counter, which is related to real time. It produces the count used @@ -488,6 +538,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, */ static void __init realtime_counter_init(void) { +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void __iomem *base; static struct clk *sys_clk; unsigned long rate; @@ -586,78 +637,9 @@ sysclk1_based: set_cntfreq(); iounmap(base); -} -#else -static inline void __init realtime_counter_init(void) -{} #endif - -#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src, clksrc_prop) \ -void __init omap##name##_gptimer_timer_init(void) \ -{ \ - omap_clk_init(); \ - omap_dmtimer_init(); \ - omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ - clksrc_prop); \ } -#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src, clksrc_prop) \ -void __init omap##name##_sync32k_timer_init(void) \ -{ \ - omap_clk_init(); \ - omap_dmtimer_init(); \ - omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - /* Enable the use of clocksource="gp_timer" kernel parameter */ \ - if (use_gptimer_clksrc) \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ - clksrc_prop); \ - else \ - omap2_sync32k_clocksource_init(); \ -} - -#ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "timer_sys_ck", NULL); -#endif /* CONFIG_ARCH_OMAP2 */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) -OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "timer_sys_ck", NULL); -OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", - 2, "timer_sys_ck", NULL); -#endif /* CONFIG_ARCH_OMAP3 */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ - defined(CONFIG_SOC_AM43XX) -OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, - 1, "timer_sys_ck", "ti,timer-alwon"); -#endif - -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) -static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "sys_clkin_ck", NULL); -#endif - -#ifdef CONFIG_ARCH_OMAP4 -#ifdef CONFIG_HAVE_ARM_TWD -void __init omap4_local_timer_init(void) -{ - omap4_sync32k_timer_init(); - clocksource_probe(); -} -#else -void __init omap4_local_timer_init(void) -{ - omap4_sync32k_timer_init(); -} -#endif /* CONFIG_HAVE_ARM_TWD */ -#endif /* CONFIG_ARCH_OMAP4 */ - -#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) void __init omap5_realtime_timer_init(void) { omap4_sync32k_timer_init(); diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d44d311704ba..2028167fff31 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -280,10 +280,6 @@ void omap3_vc_set_pmic_signaling(int core_next_state) } } -#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \ - OMAP3430_PRM_POLCTRL_CLKREQ_POL) -#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL - /* * Configure signal polarity for sys_clkreq and sys_off_mode pins * as the default values are wrong and can cause the system to hang diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c index 0ab2f8bae28e..a728c78b996f 100644 --- a/arch/arm/mach-prima2/hotplug.c +++ b/arch/arm/mach-prima2/hotplug.c @@ -32,7 +32,7 @@ static inline void platform_do_lowpower(unsigned int cpu) * * Called with IRQs disabled */ -void __ref sirfsoc_cpu_die(unsigned int cpu) +void sirfsoc_cpu_die(unsigned int cpu) { platform_do_lowpower(cpu); } diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 5851f4c254c1..a7dae60810e8 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -26,6 +26,7 @@ #include <linux/dm9000.h> #include <linux/leds.h> #include <linux/rtc-v3020.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> @@ -305,11 +306,14 @@ static inline void cm_x300_init_lcd(void) {} #endif #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup cm_x300_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data cm_x300_backlight_data = { - .pwm_id = 2, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -323,6 +327,7 @@ static struct platform_device cm_x300_backlight_device = { static void cm_x300_init_bl(void) { + pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup)); platform_device_register(&cm_x300_backlight_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 3aa264640c9d..db20d25daaab 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -20,6 +20,7 @@ #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c/pxa-i2c.h> @@ -184,11 +185,14 @@ static inline void income_lcd_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup income_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data income_backlight_data = { - .pwm_id = 0, .max_brightness = 0x3ff, .dft_brightness = 0x1ff, - .pwm_period_ns = 1000000, .enable_gpio = -1, }; @@ -202,6 +206,7 @@ static struct platform_device income_backlight = { static void __init income_pwm_init(void) { + pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup)); platform_device_register(&income_backlight); } #else diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index c62473235a13..2a6e0ae2b920 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -395,6 +395,26 @@ static struct resource pxa_ir_resources[] = { .end = IRQ_ICP, .flags = IORESOURCE_IRQ, }, + [3] = { + .start = 0x40800000, + .end = 0x4080001b, + .flags = IORESOURCE_MEM, + }, + [4] = { + .start = 0x40700000, + .end = 0x40700023, + .flags = IORESOURCE_MEM, + }, + [5] = { + .start = 17, + .end = 17, + .flags = IORESOURCE_DMA, + }, + [6] = { + .start = 18, + .end = 18, + .flags = IORESOURCE_DMA, + }, }; struct platform_device pxa_device_ficp = { diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index ab93441e596e..9a9c15bfcd34 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/input.h> #include <linux/gpio.h> @@ -49,11 +50,14 @@ #define GPIO19_GEN1_CAM_RST 19 #define GPIO28_GEN2_CAM_RST 28 +static struct pwm_lookup ezx_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data ezx_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -817,6 +821,7 @@ static void __init a780_init(void) platform_device_register(&a780_camera); } + pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a780_devices)); } diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 5fb41ad6e3bc..b076a835eb21 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -557,10 +557,8 @@ static struct platform_device hx4700_lcd = { */ static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = -1, /* Superseded by pwm_lookup */ .max_brightness = 200, .dft_brightness = 100, - .pwm_period_ns = 30923, .enable_gpio = -1, }; @@ -630,7 +628,6 @@ static struct spi_board_info tsc2046_board_info[] __initdata = { static struct pxa2xx_spi_master pxa_ssp2_master_info = { .num_chipselect = 1, - .clock_enable = CKEN_SSP2, .enable_dma = 1, }; diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 9b0eb0252af6..a1869f9b6219 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -116,13 +116,11 @@ static struct spi_board_info mcp251x_board_info[] = { }; static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = { - .clock_enable = CKEN_SSP3, .num_chipselect = 2, .enable_dma = 1 }; static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = { - .clock_enable = CKEN_SSP4, .num_chipselect = 2, .enable_dma = 1 }; diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index ba6a6e1d29e9..5f6b850ebe33 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -52,9 +52,9 @@ #define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 #define GPIO102_MAGICIAN_KEY_PHONE 102 #define GPIO103_MAGICIAN_LED_KP 103 -#define GPIO104_MAGICIAN_LCD_POWER_1 104 -#define GPIO105_MAGICIAN_LCD_POWER_2 105 -#define GPIO106_MAGICIAN_LCD_POWER_3 106 +#define GPIO104_MAGICIAN_LCD_VOFF_EN 104 +#define GPIO105_MAGICIAN_LCD_VON_EN 105 +#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106 #define GPIO107_MAGICIAN_DS1WM_IRQ 107 #define GPIO108_MAGICIAN_GSM_READY 108 #define GPIO114_MAGICIAN_UNKNOWN 114 @@ -78,43 +78,51 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO +#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) /* output */ -#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) -#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) -#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) -#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) -#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) -#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) -#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) -#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) -#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) -#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) -#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) -#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) -#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) -#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) -#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) -#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) -#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) -#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) +#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) +#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) +#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) +#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) +#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) +#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) +#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) +#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) +#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) +#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) +#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) +#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) +#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) +#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) +#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2) +#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) +#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) +#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6) +#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ -#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) -#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) +/* USB or AC charger type */ +#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0) +/* + * Vbus is detected + * FIXME behaves like (6,3), may differ for host/device + */ +#define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1) -#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) -#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) -#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) -#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) -#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) +#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) +#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) +#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) +#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) +#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) -#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) +#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) +/* FIXME behaves like (4,1), may differ for host/device */ +#define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3) #endif /* _MAGICIAN_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index 599b925a657c..1a4291936c58 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -19,7 +19,7 @@ #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ -extern int __init pxa27x_set_pwrmode(unsigned int mode); +extern int pxa27x_set_pwrmode(unsigned int mode); extern void pxa27x_cpu_pm_enter(suspend_state_t state); #endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 4823d972e647..5fcd4f094900 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -23,6 +23,7 @@ #include <linux/ioport.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> @@ -271,11 +272,14 @@ static struct platform_device lpd270_flash_device[2] = { }, }; +static struct pwm_lookup lpd270_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data lpd270_backlight_data = { - .pwm_id = 0, .max_brightness = 1, .dft_brightness = 1, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -474,6 +478,7 @@ static void __init lpd270_init(void) */ ARB_CNTRL = ARB_CORE_PARK | 0x234; + pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index a9761c293028..896b268c3ab7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -24,8 +24,10 @@ #include <linux/mfd/htc-pasic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> @@ -43,6 +45,12 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/regulator/max1586.h> + +#include <linux/platform_data/pxa2xx_udc.h> +#include <mach/udc.h> +#include <mach/pxa27x-udc.h> + #include "devices.h" #include "generic.h" @@ -52,36 +60,36 @@ static unsigned long magician_pin_config[] __initdata = { GPIO20_nSDCS_2, GPIO21_nSDCS_3, GPIO15_nCS_1, - GPIO78_nCS_2, /* PASIC3 */ - GPIO79_nCS_3, /* EGPIO CPLD */ + GPIO78_nCS_2, /* PASIC3 */ + GPIO79_nCS_3, /* EGPIO CPLD */ GPIO80_nCS_4, GPIO33_nCS_5, - /* I2C */ + /* I2C UDA1380 + OV9640 */ GPIO117_I2C_SCL, GPIO118_I2C_SDA, - /* PWM 0 */ + /* PWM 0 - LCD backlight */ GPIO16_PWM0_OUT, - /* I2S */ + /* I2S UDA1380 capture */ GPIO28_I2S_BITCLK_OUT, GPIO29_I2S_SDATA_IN, GPIO31_I2S_SYNC, GPIO113_I2S_SYSCLK, - /* SSP 1 */ + /* SSP 1 UDA1380 playback */ GPIO23_SSP1_SCLK, GPIO24_SSP1_SFRM, GPIO25_SSP1_TXD, - /* SSP 2 */ + /* SSP 2 TSC2046 touchscreen */ GPIO19_SSP2_SCLK, GPIO14_SSP2_SFRM, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, - /* MMC */ + /* MMC/SD/SDHC slot */ GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, GPIO109_MMC_DAT_1, @@ -92,7 +100,7 @@ static unsigned long magician_pin_config[] __initdata = { /* LCD */ GPIOxx_LCD_TFT_16BPP, - /* QCI */ + /* QCI camera interface */ GPIO12_CIF_DD_7, GPIO17_CIF_DD_6, GPIO50_CIF_DD_3, @@ -120,12 +128,13 @@ static unsigned long magician_pin_config[] __initdata = { }; /* - * IRDA + * IrDA */ static struct pxaficp_platform_data magician_ficp_info = { .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN, .transceiver_cap = IR_SIRMODE | IR_OFF, + .gpio_pwdown_inverted = 0, }; /* @@ -134,11 +143,11 @@ static struct pxaficp_platform_data magician_ficp_info = { #define INIT_KEY(_code, _gpio, _desc) \ { \ - .code = KEY_##_code, \ - .gpio = _gpio, \ - .desc = _desc, \ - .type = EV_KEY, \ - .wakeup = 1, \ + .code = KEY_##_code, \ + .gpio = _gpio, \ + .desc = _desc, \ + .type = EV_KEY, \ + .wakeup = 1, \ } static struct gpio_keys_button magician_button_table[] = { @@ -160,164 +169,162 @@ static struct gpio_keys_button magician_button_table[] = { }; static struct gpio_keys_platform_data gpio_keys_data = { - .buttons = magician_button_table, - .nbuttons = ARRAY_SIZE(magician_button_table), + .buttons = magician_button_table, + .nbuttons = ARRAY_SIZE(magician_button_table), }; static struct platform_device gpio_keys = { - .name = "gpio-keys", - .dev = { + .name = "gpio-keys", + .dev = { .platform_data = &gpio_keys_data, }, - .id = -1, + .id = -1, }; - /* * EGPIO (Xilinx CPLD) * - * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input + * 32-bit aligned 8-bit registers + * 16 possible registers (reg windows size), only 7 used: + * 3x output, 1x irq, 3x input */ static struct resource egpio_resources[] = { [0] = { - .start = PXA_CS3_PHYS, - .end = PXA_CS3_PHYS + 0x20 - 1, - .flags = IORESOURCE_MEM, + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + 0x20 - 1, + .flags = IORESOURCE_MEM, }, [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), - .flags = IORESOURCE_IRQ, + .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .flags = IORESOURCE_IRQ, }, }; static struct htc_egpio_chip egpio_chips[] = { [0] = { - .reg_start = 0, - .gpio_base = MAGICIAN_EGPIO(0, 0), - .num_gpios = 24, - .direction = HTC_EGPIO_OUTPUT, - .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ + .reg_start = 0, + .gpio_base = MAGICIAN_EGPIO(0, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_OUTPUT, + /* + * Depends on modules configuration + */ + .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ }, [1] = { - .reg_start = 4, - .gpio_base = MAGICIAN_EGPIO(4, 0), - .num_gpios = 24, - .direction = HTC_EGPIO_INPUT, + .reg_start = 4, + .gpio_base = MAGICIAN_EGPIO(4, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_INPUT, }, }; static struct htc_egpio_platform_data egpio_info = { - .reg_width = 8, - .bus_width = 32, - .irq_base = IRQ_BOARD_START, - .num_irqs = 4, - .ack_register = 3, - .chip = egpio_chips, - .num_chips = ARRAY_SIZE(egpio_chips), + .reg_width = 8, + .bus_width = 32, + .irq_base = IRQ_BOARD_START, + .num_irqs = 4, + .ack_register = 3, + .chip = egpio_chips, + .num_chips = ARRAY_SIZE(egpio_chips), }; static struct platform_device egpio = { - .name = "htc-egpio", - .id = -1, - .resource = egpio_resources, - .num_resources = ARRAY_SIZE(egpio_resources), + .name = "htc-egpio", + .id = -1, + .resource = egpio_resources, + .num_resources = ARRAY_SIZE(egpio_resources), .dev = { .platform_data = &egpio_info, }, }; /* - * LCD - Toppoly TD028STEB1 or Samsung LTP280QV + * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV */ static struct pxafb_mode_info toppoly_modes[] = { { - .pixclock = 96153, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 11, - .vsync_len = 3, - .left_margin = 19, - .upper_margin = 2, - .right_margin = 10, - .lower_margin = 2, - .sync = 0, + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 11, + .vsync_len = 3, + .left_margin = 19, + .upper_margin = 2, + .right_margin = 10, + .lower_margin = 2, + .sync = 0, }, }; static struct pxafb_mode_info samsung_modes[] = { { - .pixclock = 96153, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 8, - .vsync_len = 4, - .left_margin = 9, - .upper_margin = 4, - .right_margin = 9, - .lower_margin = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .pixclock = 226469, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 4, + .left_margin = 9, + .upper_margin = 4, + .right_margin = 9, + .lower_margin = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Toppoly LCD power\n"); + pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); udelay(2000); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); udelay(2000); /* FIXME: enable LCDC here */ udelay(2000); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); udelay(2000); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - pr_debug("off\n"); msleep(15); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); udelay(500); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); udelay(1000); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); } } static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Samsung LCD power\n"); + pr_debug("Samsung LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); else gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); - mdelay(10); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); - mdelay(30); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); - mdelay(10); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); + mdelay(6); /* Avdd -> Voff >5ms */ + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); + mdelay(16); /* Voff -> Von >(5+10)ms */ + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - pr_debug("off\n"); - mdelay(10); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); - mdelay(30); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); - mdelay(10); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); + mdelay(16); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); + mdelay(6); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); else @@ -326,29 +333,43 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) } static struct pxafb_mach_info toppoly_info = { - .modes = toppoly_modes, - .num_modes = 1, - .fixed_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP, - .pxafb_lcd_power = toppoly_lcd_power, + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP, + .pxafb_lcd_power = toppoly_lcd_power, }; static struct pxafb_mach_info samsung_info = { - .modes = samsung_modes, - .num_modes = 1, - .fixed_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\ - LCD_ALTERNATE_MAPPING, - .pxafb_lcd_power = samsung_lcd_power, + .modes = samsung_modes, + .num_modes = 1, + .fixed_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, + .pxafb_lcd_power = samsung_lcd_power, }; /* * Backlight */ +static struct pwm_lookup magician_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923, + PWM_POLARITY_NORMAL), +}; + + /* + * fixed regulator for pwm_backlight + */ + +static struct regulator_consumer_supply pwm_backlight_supply[] = { + REGULATOR_SUPPLY("power", "pwm_backlight"), +}; + + static struct gpio magician_bl_gpios[] = { - { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, - { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, + { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, + { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, }; static int magician_backlight_init(struct device *dev) @@ -358,6 +379,7 @@ static int magician_backlight_init(struct device *dev) static int magician_backlight_notify(struct device *dev, int brightness) { + pr_debug("Brightness = %i\n", brightness); gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness); if (brightness >= 200) { gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1); @@ -373,28 +395,33 @@ static void magician_backlight_exit(struct device *dev) gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios)); } +/* + * LCD PWM backlight (main) + * + * MP1521 frequency should be: + * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns + */ + static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 0, - .max_brightness = 272, - .dft_brightness = 100, - .pwm_period_ns = 30923, - .enable_gpio = -1, - .init = magician_backlight_init, - .notify = magician_backlight_notify, - .exit = magician_backlight_exit, + .max_brightness = 272, + .dft_brightness = 100, + .enable_gpio = -1, + .init = magician_backlight_init, + .notify = magician_backlight_notify, + .exit = magician_backlight_exit, }; static struct platform_device backlight = { - .name = "pwm-backlight", - .id = -1, - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &backlight_data, + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &backlight_data, }, }; /* - * LEDs + * GPIO LEDs, Phone keys backlight, vibra */ static struct gpio_led gpio_leds[] = { @@ -416,69 +443,32 @@ static struct gpio_led_platform_data gpio_led_info = { }; static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { + .name = "leds-gpio", + .id = -1, + .dev = { .platform_data = &gpio_led_info, }, }; -static struct pasic3_led pasic3_leds[] = { - { - .led = { - .name = "magician:red", - .default_trigger = "ds2760-battery.0-charging", - }, - .hw_num = 0, - .bit2 = PASIC3_BIT2_LED0, - .mask = PASIC3_MASK_LED0, - }, - { - .led = { - .name = "magician:green", - .default_trigger = "ds2760-battery.0-charging-or-full", - }, - .hw_num = 1, - .bit2 = PASIC3_BIT2_LED1, - .mask = PASIC3_MASK_LED1, - }, - { - .led = { - .name = "magician:blue", - .default_trigger = "bluetooth", - }, - .hw_num = 2, - .bit2 = PASIC3_BIT2_LED2, - .mask = PASIC3_MASK_LED2, - }, -}; - -static struct pasic3_leds_machinfo pasic3_leds_info = { - .num_leds = ARRAY_SIZE(pasic3_leds), - .power_gpio = EGPIO_MAGICIAN_LED_POWER, - .leds = pasic3_leds, -}; - /* * PASIC3 with DS1WM */ static struct resource pasic3_resources[] = { [0] = { - .start = PXA_CS2_PHYS, + .start = PXA_CS2_PHYS, .end = PXA_CS2_PHYS + 0x1b, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_MEM, }, /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; static struct pasic3_platform_data pasic3_platform_data = { - .led_pdata = &pasic3_leds_info, .clock_rate = 4000000, }; @@ -493,25 +483,42 @@ static struct platform_device pasic3 = { }; /* - * USB "Transceiver" + * PXA UDC + */ + +static void magician_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE); +} + +static struct pxa2xx_udc_mach_info magician_udc_info __initdata = { + .udc_command = magician_udc_command, + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, +}; + +/* + * USB device VBus detection */ static struct resource gpio_vbus_resource = { - .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }; static struct gpio_vbus_mach_info gpio_vbus_info = { - .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, - .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB, + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, + .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS, }; static struct platform_device gpio_vbus = { - .name = "gpio-vbus", - .id = -1, - .num_resources = 1, - .resource = &gpio_vbus_resource, + .name = "gpio-vbus", + .id = -1, + .num_resources = 1, + .resource = &gpio_vbus_resource, .dev = { .platform_data = &gpio_vbus_info, }, @@ -521,19 +528,60 @@ static struct platform_device gpio_vbus = { * External power */ -static int power_supply_init(struct device *dev) +static int magician_supply_init(struct device *dev) +{ + int ret = -1; + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger"); + if (ret) { + pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret); + goto err_ac; + } + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted"); + if (ret) { + pr_err("Cannot request cable detection GPIO (%i)\n", ret); + goto err_usb; + } + + return 0; + +err_usb: + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); +err_ac: + return ret; +} + +static void magician_set_charge(int flags) { - return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); + if (flags & PDA_POWER_CHARGE_AC) { + pr_debug("Charging from AC\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1); + } else if (flags & PDA_POWER_CHARGE_USB) { + pr_debug("Charging from USB\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1); + } else { + pr_debug("Charging disabled\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0); + } } static int magician_is_ac_online(void) { - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) && + gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */ } -static void power_supply_exit(struct device *dev) +static int magician_is_usb_online(void) { - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) && + (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */ +} + +static void magician_supply_exit(struct device *dev) +{ + gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED); + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); } static char *magician_supplicants[] = { @@ -541,38 +589,40 @@ static char *magician_supplicants[] = { }; static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = magician_is_ac_online, - .exit = power_supply_exit, - .supplied_to = magician_supplicants, - .num_supplicants = ARRAY_SIZE(magician_supplicants), + .init = magician_supply_init, + .exit = magician_supply_exit, + .is_ac_online = magician_is_ac_online, + .is_usb_online = magician_is_usb_online, + .set_charge = magician_set_charge, + .supplied_to = magician_supplicants, + .num_supplicants = ARRAY_SIZE(magician_supplicants), }; static struct resource power_supply_resources[] = { [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, [1] = { - .name = "usb", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .name = "usb", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, }; static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { + .name = "pda-power", + .id = -1, + .dev = { .platform_data = &power_supply_info, }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), }; /* @@ -586,11 +636,12 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { - .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | + REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), - .consumer_supplies = bq24022_consumers, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, }; static struct gpio bq24022_gpios[] = { @@ -603,39 +654,85 @@ static struct gpio_regulator_state bq24022_states[] = { }; static struct gpio_regulator_config bq24022_info = { - .supply_name = "bq24022", + .supply_name = "bq24022", - .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, - .enable_high = 0, - .enabled_at_boot = 0, + .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .enable_high = 0, + .enabled_at_boot = 1, - .gpios = bq24022_gpios, - .nr_gpios = ARRAY_SIZE(bq24022_gpios), + .gpios = bq24022_gpios, + .nr_gpios = ARRAY_SIZE(bq24022_gpios), - .states = bq24022_states, - .nr_states = ARRAY_SIZE(bq24022_states), + .states = bq24022_states, + .nr_states = ARRAY_SIZE(bq24022_states), - .type = REGULATOR_CURRENT, - .init_data = &bq24022_init_data, + .type = REGULATOR_CURRENT, + .init_data = &bq24022_init_data, }; static struct platform_device bq24022 = { - .name = "gpio-regulator", - .id = -1, - .dev = { + .name = "gpio-regulator", + .id = -1, + .dev = { .platform_data = &bq24022_info, }, }; /* + * Vcore regulator MAX1587A + */ + +static struct regulator_consumer_supply magician_max1587a_consumers[] = { + REGULATOR_SUPPLY("vcc_core", NULL), +}; + +static struct regulator_init_data magician_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 700000, + .max_uV = 1475000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = magician_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers), +}; + +static struct max1586_subdev_data magician_max1587a_subdevs[] = { + { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &magician_max1587a_v3_info, + } +}; + +static struct max1586_platform_data magician_max1587a_info = { + .subdevs = magician_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs), + /* + * NOTICE measured directly on the PCB (board_id == 0x3a), but + * if R24 is present, it will boost the voltage + * (write 1.475V, get 1.645V and smoke) + */ + .v3_gain = MAX1586_GAIN_NO_R24, +}; + +static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &magician_max1587a_info, + }, +}; + +/* * MMC/SD */ static int magician_mci_init(struct device *dev, - irq_handler_t detect_irq, void *data) + irq_handler_t detect_irq, void *data) { return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0, - "mmc card detect", data); + "mmc card detect", data); } static void magician_mci_exit(struct device *dev, void *data) @@ -644,9 +741,9 @@ static void magician_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data magician_mci_info = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = magician_mci_init, - .exit = magician_mci_exit, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = magician_mci_init, + .exit = magician_mci_exit, .gpio_card_detect = -1, .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY, .gpio_card_ro_invert = 1, @@ -660,47 +757,102 @@ static struct pxamci_platform_data magician_mci_info = { static struct pxaohci_platform_data magician_ohci_info = { .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW, + /* port1: CSR Bluetooth, port2: OTG with UDC */ + .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, .power_budget = 0, + .power_on_delay = 100, }; - /* * StrataFlash */ +static int magician_flash_init(struct platform_device *pdev) +{ + int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable"); + + if (ret) { + pr_err("Cannot request flash enable GPIO (%i)\n", ret); + return ret; + } + + ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1); + if (ret) { + pr_err("Cannot set direction for flash enable (%i)\n", ret); + gpio_free(EGPIO_MAGICIAN_FLASH_VPP); + } + + return ret; +} + static void magician_set_vpp(struct platform_device *pdev, int vpp) { gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); } +static void magician_flash_exit(struct platform_device *pdev) +{ + gpio_free(EGPIO_MAGICIAN_FLASH_VPP); +} + static struct resource strataflash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_64M - 1, - .flags = IORESOURCE_MEM, + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, }; +static struct mtd_partition magician_flash_parts[] = { + { + .name = "Bootloader", + .offset = 0x0, + .size = 0x40000, + .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */ + }, + { + .name = "Linux Kernel", + .offset = 0x40000, + .size = MTDPART_SIZ_FULL, + }, +}; + +/* + * physmap-flash driver + */ + static struct physmap_flash_data strataflash_data = { - .width = 4, - .set_vpp = magician_set_vpp, + .width = 4, + .init = magician_flash_init, + .set_vpp = magician_set_vpp, + .exit = magician_flash_exit, + .parts = magician_flash_parts, + .nr_parts = ARRAY_SIZE(magician_flash_parts), }; static struct platform_device strataflash = { - .name = "physmap-flash", - .id = -1, - .resource = &strataflash_resource, - .num_resources = 1, + .name = "physmap-flash", + .id = -1, + .resource = &strataflash_resource, + .num_resources = 1, .dev = { .platform_data = &strataflash_data, }, }; /* - * I2C + * PXA I2C main controller */ static struct i2c_pxa_platform_data i2c_info = { - .fast_mode = 1, + /* OV9640 I2C device doesn't support fast mode */ + .fast_mode = 0, +}; + +/* + * PXA I2C power controller + */ + +static struct i2c_pxa_platform_data magician_i2c_power_info = { + .fast_mode = 1, }; /* @@ -720,12 +872,13 @@ static struct platform_device *devices[] __initdata = { }; static struct gpio magician_global_gpios[] = { - { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, + { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" }, - { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" }, - { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" }, - { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" }, - { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, + + /* NOTICE valid LCD init sequence */ + { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" }, + { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" }, + { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" }, }; static void __init magician_init(void) @@ -737,44 +890,55 @@ static void __init magician_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios)); if (err) - pr_err("magician: Failed to request GPIOs: %d\n", err); + pr_err("magician: Failed to request global GPIOs: %d\n", err); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - platform_add_devices(ARRAY_AND_SIZE(devices)); + pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup)); pxa_set_ficp_info(&magician_ficp_info); - pxa27x_set_i2c_power_info(NULL); + pxa27x_set_i2c_power_info(&magician_i2c_power_info); pxa_set_i2c_info(&i2c_info); + + i2c_register_board_info(1, + ARRAY_AND_SIZE(magician_pwr_i2c_board_info)); + pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); + pxa_set_udc_info(&magician_udc_info); /* Check LCD type we have */ cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000); if (cpld) { - u8 board_id = __raw_readb(cpld+0x14); + u8 board_id = __raw_readb(cpld + 0x14); + iounmap(cpld); system_rev = board_id & 0x7; lcd_select = board_id & 0x8; pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); if (lcd_select && (system_rev < 3)) + /* NOTICE valid LCD init sequence */ gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER, - GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER"); - pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); + GPIOF_OUT_INIT_LOW, "Samsung LCD Power"); + pxa_set_fb_info(NULL, + lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); -} + regulator_register_always_on(0, "power", pwm_backlight_supply, + ARRAY_SIZE(pwm_backlight_supply), 5000000); + + platform_add_devices(ARRAY_AND_SIZE(devices)); +} MACHINE_START(MAGICIAN, "HTC Magician") - .atag_offset = 0x100, - .map_io = pxa27x_map_io, - .nr_irqs = MAGICIAN_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_machine = magician_init, + .atag_offset = 0x100, + .map_io = pxa27x_map_io, + .nr_irqs = MAGICIAN_NR_IRQS, + .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, + .init_machine = magician_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 2c0658cf6be2..c3a87c176d72 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -26,6 +26,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> #include <linux/i2c/pxa-i2c.h> @@ -248,11 +249,14 @@ static struct platform_device mst_flash_device[2] = { }; #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup mainstone_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data mainstone_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -266,9 +270,16 @@ static struct platform_device mainstone_backlight_device = { static void __init mainstone_backlight_register(void) { - int ret = platform_device_register(&mainstone_backlight_device); - if (ret) + int ret; + + pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup)); + + ret = platform_device_register(&mainstone_backlight_device); + if (ret) { printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret); + pwm_remove_table(mainstone_pwm_lookup, + ARRAY_SIZE(mainstone_pwm_lookup)); + } } #else #define mainstone_backlight_register() do { } while (0) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 29997bde277d..3b52b1aa0659 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -26,6 +26,7 @@ #include <linux/input.h> #include <linux/delay.h> #include <linux/gpio_keys.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/rtc.h> #include <linux/leds.h> @@ -181,12 +182,15 @@ static unsigned long mioa701_pin_config[] = { MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), }; +static struct pwm_lookup mioa701_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024, + PWM_POLARITY_NORMAL), +}; + /* LCD Screen and Backlight */ static struct platform_pwm_backlight_data mioa701_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 50, - .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */ .enable_gpio = -1, }; @@ -678,6 +682,7 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) +MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL); MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink); @@ -685,6 +690,7 @@ static struct platform_device *devices[] __initdata = { &mioa701_gpio_keys, &mioa701_backlight, &mioa701_led, + &wm9713_acodec, &pxa2xx_pcm, &mioa701_sound, &power_dev, @@ -751,6 +757,7 @@ static void __init mioa701_machine_init(void) pxa_set_udc_info(&mioa701_udc_info); pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; + pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup)); platform_add_devices(devices, ARRAY_SIZE(devices)); gsm_init(); diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index e54a296fb81f..13eba2b26e0a 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -15,6 +15,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/wm97xx.h> @@ -270,6 +271,11 @@ void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset) * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup palm27x_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024, + PWM_POLARITY_NORMAL), +}; + static int palm_bl_power; static int palm_lcd_power; @@ -318,10 +324,8 @@ static void palm27x_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data palm27x_backlight_data = { - .pwm_id = 0, .max_brightness = 0xfe, .dft_brightness = 0x7e, - .pwm_period_ns = 3500 * 1024, .enable_gpio = -1, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, @@ -340,6 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd) { palm_bl_power = bl; palm_lcd_power = lcd; + pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup)); platform_device_register(&palm27x_backlight); } #endif diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 7691c974ca4b..aebf6de62468 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/irq.h> #include <linux/input.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/input/matrix_keypad.h> @@ -166,11 +167,14 @@ static inline void palmtc_keys_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup palmtc_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS, + PWM_PERIOD_NORMAL), +}; + static struct platform_pwm_backlight_data palmtc_backlight_data = { - .pwm_id = 1, .max_brightness = PALMTC_MAX_INTENSITY, .dft_brightness = PALMTC_MAX_INTENSITY, - .pwm_period_ns = PALMTC_PERIOD_NS, .enable_gpio = GPIO_NR_PALMTC_BL_POWER, }; @@ -184,6 +188,7 @@ static struct platform_device palmtc_backlight = { static void __init palmtc_pwm_init(void) { + pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup)); platform_device_register(&palmtc_backlight); } #else diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 956fd24ee6fd..e64bb4326e69 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -21,6 +21,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/wm97xx.h> @@ -138,6 +139,11 @@ static struct platform_device palmte2_pxa_keys = { /****************************************************************************** * Backlight ******************************************************************************/ +static struct pwm_lookup palmte2_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, + PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL), +}; + static struct gpio palmte_bl_gpios[] = { { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" }, { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" }, @@ -161,10 +167,8 @@ static void palmte2_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data palmte2_backlight_data = { - .pwm_id = 0, .max_brightness = PALMTE2_MAX_INTENSITY, .dft_brightness = PALMTE2_MAX_INTENSITY, - .pwm_period_ns = PALMTE2_PERIOD_NS, .enable_gpio = -1, .init = palmte2_backlight_init, .notify = palmte2_backlight_notify, @@ -355,6 +359,7 @@ static void __init palmte2_init(void) pxa_set_ac97_info(&palmte2_ac97_pdata); pxa_set_ficp_info(&palmte2_ficp_platform_data); + pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup)); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index d8319b54299a..b71c96f614f9 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -24,6 +24,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <media/mt9v022.h> @@ -148,11 +149,14 @@ static struct pxafb_mach_info pcm990_fbinfo __initdata = { }; #endif +static struct pwm_lookup pcm990_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data pcm990_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -542,6 +546,7 @@ void __init pcm990_baseboard_init(void) #ifndef CONFIG_PCM990_DISPLAY_NONE pxa_set_fb_info(NULL, &pcm990_fbinfo); #endif + pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup)); platform_device_register(&pcm990_backlight_device); /* MMC */ diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 221260d5d109..ffc424028557 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset); */ static unsigned int pwrmode = PWRMODE_SLEEP; -int __init pxa27x_set_pwrmode(unsigned int mode) +int pxa27x_set_pwrmode(unsigned int mode) { switch (mode) { case PWRMODE_SLEEP: diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 88f70c37ad0d..36571a9a44fe 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -29,6 +29,7 @@ #include <linux/leds.h> #include <linux/w1-gpio.h> #include <linux/sched.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> @@ -507,7 +508,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .ext_pullup_enable_pin = -EINVAL, }; -struct platform_device raumfeld_w1_gpio_device = { +static struct platform_device raumfeld_w1_gpio_device = { .name = "w1-gpio", .dev = { .platform_data = &w1_gpio_platform_data @@ -531,13 +532,15 @@ static void __init raumfeld_w1_init(void) * Framebuffer device */ +static struct pwm_lookup raumfeld_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + /* PWM controlled backlight */ static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - /* 10000 ns = 10 ms ^= 100 kHz */ - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -618,6 +621,8 @@ static void __init raumfeld_lcd_init(void) } else { mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + pwm_add_table(raumfeld_pwm_lookup, + ARRAY_SIZE(raumfeld_pwm_lookup)); platform_device_register(&raumfeld_pwm_backlight_device); } @@ -629,7 +634,7 @@ static void __init raumfeld_lcd_init(void) * SPI devices */ -struct spi_gpio_platform_data raumfeld_spi_platform_data = { +static struct spi_gpio_platform_data raumfeld_spi_platform_data = { .sck = GPIO_SPI_CLK, .mosi = GPIO_SPI_MOSI, .miso = GPIO_SPI_MISO, @@ -848,7 +853,7 @@ static void __init raumfeld_power_init(void) static struct regulator_consumer_supply audio_va_consumer_supply = REGULATOR_SUPPLY("va", "0-0048"); -struct regulator_init_data audio_va_initdata = { +static struct regulator_init_data audio_va_initdata = { .consumer_supplies = &audio_va_consumer_supply, .num_consumer_supplies = 1, .constraints = { @@ -880,7 +885,7 @@ static struct regulator_consumer_supply audio_dummy_supplies[] = { REGULATOR_SUPPLY("vlc", "0-0048"), }; -struct regulator_init_data audio_dummy_initdata = { +static struct regulator_init_data audio_dummy_initdata = { .consumer_supplies = audio_dummy_supplies, .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies), .constraints = { @@ -928,7 +933,7 @@ static struct regulator_init_data vcc_mmc_init_data = { .num_consumer_supplies = 1, }; -struct max8660_subdev_data max8660_v6_subdev_data = { +static struct max8660_subdev_data max8660_v6_subdev_data = { .id = MAX8660_V6, .name = "vmmc", .platform_data = &vcc_mmc_init_data, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index a71da84e784b..349a13a76215 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -18,6 +18,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/smc91x.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <asm/mach-types.h> @@ -168,21 +169,24 @@ static inline void tavorevb_init_keypad(void) {} #endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup tavorevb_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000, + PWM_POLARITY_NORMAL), + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data tavorevb_backlight_data[] = { [0] = { /* primary backlight */ - .pwm_id = 2, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 100000, .enable_gpio = -1, }, [1] = { /* secondary backlight */ - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 100000, .enable_gpio = -1, }, }; @@ -470,6 +474,7 @@ static struct pxafb_mach_info tavorevb_lcd_info = { static void __init tavorevb_init_lcd(void) { + pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup)); platform_device_register(&tavorevb_backlight_devices[0]); platform_device_register(&tavorevb_backlight_devices[1]); pxa_set_fb_info(NULL, &tavorevb_lcd_info); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 8ab26370107e..7ecc61ad2bed 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -39,6 +39,7 @@ #include <linux/i2c/pxa-i2c.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/usb/isp116x.h> #include <linux/mtd/mtd.h> @@ -350,6 +351,11 @@ static struct pxafb_mach_info fb_info = { .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, }; +static struct pwm_lookup viper_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000, + PWM_POLARITY_NORMAL), +}; + static int viper_backlight_init(struct device *dev) { int ret; @@ -398,10 +404,8 @@ static void viper_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data viper_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 1000000, .enable_gpio = -1, .init = viper_backlight_init, .notify = viper_backlight_notify, @@ -939,6 +943,7 @@ static void __init viper_init(void) smc91x_device.num_resources--; pxa_set_i2c_info(NULL); + pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup)); platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs)); viper_init_vcore_gpios(); diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index e1a121b36cfa..d9899d73e46b 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/z2_battery.h> #include <linux/dma-mapping.h> @@ -199,21 +200,24 @@ static inline void z2_nor_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup z2_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320, + PWM_POLARITY_NORMAL), + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data z2_backlight_data[] = { [0] = { /* Keypad Backlight */ - .pwm_id = 1, .max_brightness = 1023, .dft_brightness = 0, - .pwm_period_ns = 1260320, .enable_gpio = -1, }, [1] = { /* LCD Backlight */ - .pwm_id = 2, .max_brightness = 1023, .dft_brightness = 512, - .pwm_period_ns = 1260320, .enable_gpio = -1, }, }; @@ -236,6 +240,7 @@ static struct platform_device z2_backlight_devices[2] = { }; static void __init z2_pwm_init(void) { + pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup)); platform_device_register(&z2_backlight_devices[0]); platform_device_register(&z2_backlight_devices[1]); } @@ -595,13 +600,11 @@ static struct spi_board_info spi_board_info[] __initdata = { }; static struct pxa2xx_spi_master pxa_ssp1_master_info = { - .clock_enable = CKEN_SSP, .num_chipselect = 1, .enable_dma = 1, }; static struct pxa2xx_spi_master pxa_ssp2_master_info = { - .clock_enable = CKEN_SSP2, .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 77daea478e88..e20359a7433c 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> @@ -120,11 +121,14 @@ static inline void zylonite_init_leds(void) {} #endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup zylonite_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data zylonite_backlight_data = { - .pwm_id = 3, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -206,6 +210,7 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = { static void __init zylonite_init_lcd(void) { + pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup)); platform_device_register(&zylonite_backlight_device); if (lcd_id & 0x20) { diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 5cde63a64b34..9b00123a315d 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -49,7 +49,7 @@ extern void secondary_startup_arm(void); static DEFINE_SPINLOCK(boot_lock); #ifdef CONFIG_HOTPLUG_CPU -static void __ref qcom_cpu_die(unsigned int cpu) +static void qcom_cpu_die(unsigned int cpu) { wfi(); } diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index ac22dd41b135..968e2d1964f6 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -90,7 +90,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref realview_cpu_die(unsigned int cpu) +void realview_cpu_die(unsigned int cpu) { int spurious = 0; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 926e336d6aeb..88734a5e10ca 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -98,76 +98,3 @@ config ARCH_SH73A0 comment "Renesas ARM SoCs System Configuration" endif - -if ARCH_SHMOBILE_LEGACY - -comment "Renesas ARM SoCs System Type" - -config ARCH_R8A7778 - bool "R-Car M1A (R8A77781)" - select ARCH_RCAR_GEN1 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - -config ARCH_R8A7779 - bool "R-Car H1 (R8A77790)" - select ARCH_RCAR_GEN1 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - -comment "Renesas ARM SoCs Board Type" - -config MACH_BOCKW - bool "BOCK-W platform" - depends on ARCH_R8A7778 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SND_SOC_AK4554 if SND_SIMPLE_CARD - select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C - select USE_OF - -config MACH_BOCKW_REFERENCE - bool "BOCK-W - Reference Device Tree Implementation" - depends on ARCH_R8A7778 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select USE_OF - ---help--- - Use reference implementation of BockW board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - -comment "Renesas ARM SoCs System Configuration" - -config CPU_HAS_INTEVT - bool - default y - -config SH_CLK_CPG - bool - -source "drivers/sh/Kconfig" - -endif - -if ARCH_SHMOBILE - -menu "Timer and clock configuration" - -config SHMOBILE_TIMER_HZ - int "Kernel HZ (jiffies per second)" - range 32 1024 - default "128" - help - Allows the configuration of the timer frequency. It is customary - to have the timer interrupt run at 1000 Hz or 100 Hz, but in the - case of low timer frequencies other values may be more suitable. - Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may - want to select a HZ value such as 128 that can evenly divide RCLK. - A HZ value that does not divide evenly may cause timer drift. - -endmenu - -endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 476de30798d7..a65c80ac9009 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -3,7 +3,7 @@ # # Common objects -obj-y := timer.o console.o +obj-y := timer.o # CPU objects obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o @@ -18,12 +18,6 @@ obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o -# Clock objects -ifndef CONFIG_COMMON_CLK -obj-y += clock.o -obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o -endif - # CPU reset vector handling objects cpu-y := platsmp.o headsmp.o @@ -49,11 +43,5 @@ obj-$(CONFIG_PM_RCAR) += pm-rcar.o obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o -# Board objects -ifndef CONFIG_ARCH_SHMOBILE_MULTI -obj-$(CONFIG_MACH_BOCKW) += board-bockw.o -obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o -endif - # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot deleted file mode 100644 index a489fe9a76cd..000000000000 --- a/arch/arm/mach-shmobile/Makefile.boot +++ /dev/null @@ -1,12 +0,0 @@ -# per-board load address for uImage -loadaddr-y := -loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 -loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 - -__ZRELADDR := $(sort $(loadaddr-y)) - zreladdr-y += $(__ZRELADDR) - -# Unsupported legacy stuff -# -#params_phys-y (Instead: Pass atags pointer in r2) -#initrd_phys-y (Instead: Use compiled-in initramfs) diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c deleted file mode 100644 index 4f78296f7d04..000000000000 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Bock-W board support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "r8a7778.h" - -/* - * see board-bock.c for checking detail of dip-switch - */ - -#define FPGA 0x18200000 -#define IRQ0MR 0x30 -#define COMCTLR 0x101c - -#define PFC 0xfffc0000 -#define PUPR4 0x110 -static void __init bockw_init(void) -{ - void __iomem *fpga; - void __iomem *pfc; - -#ifndef CONFIG_COMMON_CLK - r8a7778_clock_init(); -#endif - r8a7778_init_irq_extpin_dt(1); - r8a7778_add_dt_devices(); - - fpga = ioremap_nocache(FPGA, SZ_1M); - if (fpga) { - /* - * CAUTION - * - * IRQ0/1 is cascaded interrupt from FPGA. - * it should be cared in the future - * Now, it is assuming IRQ0 was used only from SMSC. - */ - u16 val = ioread16(fpga + IRQ0MR); - val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, fpga + IRQ0MR); - - iounmap(fpga); - } - - pfc = ioremap_nocache(PFC, 0x200); - if (pfc) { - /* - * FIXME - * - * SDHI CD/WP pin needs pull-up - */ - iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4); - iounmap(pfc); - } - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *const bockw_boards_compat_dt[] __initconst = { - "renesas,bockw-reference", - NULL, -}; - -DT_MACHINE_START(BOCKW_DT, "bockw") - .init_early = shmobile_init_delay, - .init_irq = r8a7778_init_irq_dt, - .init_machine = bockw_init, - .init_late = shmobile_init_late, - .dt_compat = bockw_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c deleted file mode 100644 index 25a0e7233fe4..000000000000 --- a/arch/arm/mach-shmobile/board-bockw.c +++ /dev/null @@ -1,737 +0,0 @@ -/* - * Bock-W board support - * - * Copyright (C) 2013-2014 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * Copyright (C) 2013-2014 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mfd/tmio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/mmc/sh_mmcif.h> -#include <linux/mtd/partitions.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/camera-rcar.h> -#include <linux/platform_data/usb-rcar-phy.h> -#include <linux/platform_device.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/smsc911x.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/usb/renesas_usbhs.h> - -#include <media/soc_camera.h> -#include <asm/mach/arch.h> -#include <sound/rcar_snd.h> -#include <sound/simple_card.h> - -#include "common.h" -#include "irqs.h" -#include "r8a7778.h" - -#define FPGA 0x18200000 -#define IRQ0MR 0x30 -#define COMCTLR 0x101c -static void __iomem *fpga; - -/* - * CN9(Upper side) SCIF/RCAN selection - * - * 1,4 3,6 - * SW40 SCIF RCAN - * SW41 SCIF RCAN - */ - -/* - * MMC (CN26) pin - * - * SW6 (D2) 3 pin - * SW7 (D5) ON - * SW8 (D3) 3 pin - * SW10 (D4) 1 pin - * SW12 (CLK) 1 pin - * SW13 (D6) 3 pin - * SW14 (CMD) ON - * SW15 (D6) 1 pin - * SW16 (D0) ON - * SW17 (D1) ON - * SW18 (D7) 3 pin - * SW19 (MMC) 1 pin - */ - -/* - * SSI settings - * - * SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid) - * SW46: 1101 (SSI6 Recorde) - * SW47: 1110 (SSI5 Playback) - * SW48: 11 (Recorde power) - * SW49: 1 (SSI slave mode) - * SW50: 1111 (SSI7, SSI8) - * SW51: 1111 (SSI3, SSI4) - * SW54: 1pin (ak4554 FPGA control) - * SW55: 1 (CLKB is 24.5760MHz) - * SW60: 1pin (ak4554 FPGA control) - * SW61: 3pin (use X11 clock) - * SW78: 3-6 (ak4642 connects I2C0) - * - * You can use sound as - * - * hw0: CN19: SSI56-AK4643 - * hw1: CN21: SSI3-AK4554(playback) - * hw2: CN21: SSI4-AK4554(capture) - * hw3: CN20: SSI7-AK4554(playback) - * hw4: CN20: SSI8-AK4554(capture) - * - * this command is required when playback on hw0. - * - * # amixer set "LINEOUT Mixer DACL" on - */ - -/* - * USB - * - * USB1 (CN29) can be Host/Function - * - * Host Func - * SW98 1 2 - * SW99 1 3 - */ - -/* Dummy supplies, where voltage doesn't matter */ -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), -}; - -static struct regulator_consumer_supply fixed3v3_power_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sh_mmcif"), - REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), -}; - -static struct smsc911x_platform_config smsc911x_data __initdata = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource smsc911x_resources[] __initdata = { - DEFINE_RES_MEM(0x18300000, 0x1000), - DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ -}; - -#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC) -/* - * When USB1 is Func - */ -static int usbhsf_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -#define SUSPMODE 0x102 -static int usbhsf_power_ctrl(struct platform_device *pdev, - void __iomem *base, int enable) -{ - enable = !!enable; - - r8a7778_usb_phy_power(enable); - - iowrite16(enable << 14, base + SUSPMODE); - - return 0; -} - -static struct resource usbhsf_resources[] __initdata = { - DEFINE_RES_MEM(0xffe60000, 0x110), - DEFINE_RES_IRQ(gic_iid(0x4f)), -}; - -static struct renesas_usbhs_platform_info usbhs_info __initdata = { - .platform_callback = { - .get_id = usbhsf_get_id, - .power_ctrl = usbhsf_power_ctrl, - }, - .driver_param = { - .buswait_bwait = 4, - .d0_tx_id = HPBDMA_SLAVE_USBFUNC_TX, - .d1_rx_id = HPBDMA_SLAVE_USBFUNC_RX, - }, -}; - -#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,} -#define USB1_DEVICE "renesas_usbhs" -#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \ - platform_device_register_resndata( \ - NULL, "renesas_usbhs", -1, \ - usbhsf_resources, \ - ARRAY_SIZE(usbhsf_resources), \ - &usbhs_info, sizeof(struct renesas_usbhs_platform_info)) - -#else -/* - * When USB1 is Host - */ -#define USB_PHY_SETTING { } -#define USB1_DEVICE "ehci-platform" -#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() - -#endif - -/* USB */ -static struct resource usb_phy_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70800, 0x100), - DEFINE_RES_MEM(0xffe76000, 0x100), -}; - -static struct rcar_phy_platform_data usb_phy_platform_data __initdata = - USB_PHY_SETTING; - - -/* SDHI */ -static struct tmio_mmc_data sdhi0_info __initdata = { - .chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX, - .chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX, - .capabilities = MMC_CAP_SD_HIGHSPEED, - .ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .flags = TMIO_MMC_HAS_IDLE_WAIT, -}; - -static struct resource sdhi0_resources[] __initdata = { - DEFINE_RES_MEM(0xFFE4C000, 0x100), - DEFINE_RES_IRQ(gic_iid(0x77)), -}; - -/* Ether */ -static struct resource ether_resources[] __initdata = { - DEFINE_RES_MEM(0xfde00000, 0x400), - DEFINE_RES_IRQ(gic_iid(0x89)), -}; - -static struct sh_eth_plat_data ether_platform_data __initdata = { - .phy = 0x01, - .edmac_endian = EDMAC_LITTLE_ENDIAN, - .phy_interface = PHY_INTERFACE_MODE_RMII, - /* - * Although the LINK signal is available on the board, it's connected to - * the link/activity LED output of the PHY, thus the link disappears and - * reappears after each packet. We'd be better off ignoring such signal - * and getting the link state from the PHY indirectly. - */ - .no_ether_link = 1, -}; - -static struct platform_device_info ether_info __initdata = { - .name = "r8a777x-ether", - .id = -1, - .res = ether_resources, - .num_res = ARRAY_SIZE(ether_resources), - .data = ðer_platform_data, - .size_data = sizeof(ether_platform_data), - .dma_mask = DMA_BIT_MASK(32), -}; - -/* I2C */ -static struct i2c_board_info i2c0_devices[] = { - { - I2C_BOARD_INFO("rx8581", 0x51), - }, { - I2C_BOARD_INFO("ak4643", 0x12), - } -}; - -/* HSPI*/ -static struct mtd_partition m25p80_spi_flash_partitions[] = { - { - .name = "data(spi)", - .size = 0x0100000, - .offset = 0, - }, -}; - -static struct flash_platform_data spi_flash_data = { - .name = "m25p80", - .type = "s25fl008k", - .parts = m25p80_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions), -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 104000000, - .chip_select = 0, - .bus_num = 0, - .mode = SPI_MODE_0, - .platform_data = &spi_flash_data, - }, -}; - -/* MMC */ -static struct resource mmc_resources[] __initdata = { - DEFINE_RES_MEM(0xffe4e000, 0x100), - DEFINE_RES_IRQ(gic_iid(0x5d)), -}; - -static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = { - .sup_pclk = 0, - .caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NEEDS_POLL, -}; - -/* In the default configuration both decoders reside on I2C bus 0 */ -#define BOCKW_CAMERA(idx) \ -static struct i2c_board_info camera##idx##_info = { \ - I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)), \ -}; \ - \ -static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \ - .bus_id = idx, \ - .i2c_adapter_id = 0, \ - .board_info = &camera##idx##_info, \ -} - -BOCKW_CAMERA(0); -BOCKW_CAMERA(1); - -/* VIN */ -static struct rcar_vin_platform_data vin_platform_data __initdata = { - .flags = RCAR_VIN_BT656, -}; - -#define R8A7778_VIN(idx) \ -static struct resource vin##idx##_resources[] __initdata = { \ - DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \ - DEFINE_RES_IRQ(gic_iid(0x5a)), \ -}; \ - \ -static struct platform_device_info vin##idx##_info __initdata = { \ - .name = "r8a7778-vin", \ - .id = idx, \ - .res = vin##idx##_resources, \ - .num_res = ARRAY_SIZE(vin##idx##_resources), \ - .dma_mask = DMA_BIT_MASK(32), \ - .data = &vin_platform_data, \ - .size_data = sizeof(vin_platform_data), \ -} -R8A7778_VIN(0); -R8A7778_VIN(1); - -/* Sound */ -static struct resource rsnd_resources[] __initdata = { - [RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000), - [RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240), - [RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24), -}; - -static struct rsnd_ssi_platform_info rsnd_ssi[] = { - RSND_SSI_UNUSED, /* SSI 0 */ - RSND_SSI_UNUSED, /* SSI 1 */ - RSND_SSI_UNUSED, /* SSI 2 */ - RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE), - RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE), -}; - -static struct rsnd_src_platform_info rsnd_src[9] = { - RSND_SRC_UNUSED, /* SRU 0 */ - RSND_SRC_UNUSED, /* SRU 1 */ - RSND_SRC_UNUSED, /* SRU 2 */ - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), -}; - -static struct rsnd_dai_platform_info rsnd_dai[] = { - { - .playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] }, - .capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] }, - }, { - .playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] }, - }, { - .capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] }, - }, { - .playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] }, - }, { - .capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] }, - }, -}; - -enum { - AK4554_34 = 0, - AK4643_56, - AK4554_78, - SOUND_MAX, -}; - -static int rsnd_codec_power(int id, int enable) -{ - static int sound_user[SOUND_MAX] = {0, 0, 0}; - int *usr = NULL; - u32 bit; - - switch (id) { - case 3: - case 4: - usr = sound_user + AK4554_34; - bit = (1 << 10); - break; - case 5: - case 6: - usr = sound_user + AK4643_56; - bit = (1 << 6); - break; - case 7: - case 8: - usr = sound_user + AK4554_78; - bit = (1 << 7); - break; - } - - if (!usr) - return -EIO; - - if (enable) { - if (*usr == 0) { - u32 val = ioread16(fpga + COMCTLR); - val &= ~bit; - iowrite16(val, fpga + COMCTLR); - } - - (*usr)++; - } else { - if (*usr == 0) - return 0; - - (*usr)--; - - if (*usr == 0) { - u32 val = ioread16(fpga + COMCTLR); - val |= bit; - iowrite16(val, fpga + COMCTLR); - } - } - - return 0; -} - -static int rsnd_start(int id) -{ - return rsnd_codec_power(id, 1); -} - -static int rsnd_stop(int id) -{ - return rsnd_codec_power(id, 0); -} - -static struct rcar_snd_info rsnd_info = { - .flags = RSND_GEN1, - .ssi_info = rsnd_ssi, - .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), - .src_info = rsnd_src, - .src_info_nr = ARRAY_SIZE(rsnd_src), - .dai_info = rsnd_dai, - .dai_info_nr = ARRAY_SIZE(rsnd_dai), - .start = rsnd_start, - .stop = rsnd_stop, -}; - -static struct asoc_simple_card_info rsnd_card_info[] = { - /* SSI5, SSI6 */ - { - .name = "AK4643", - .card = "SSI56-AK4643", - .codec = "ak4642-codec.0-0012", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, - .cpu_dai = { - .name = "rsnd-dai.0", - }, - .codec_dai = { - .name = "ak4642-hifi", - .sysclk = 11289600, - }, - }, - /* SSI3 */ - { - .name = "AK4554", - .card = "SSI3-AK4554(playback)", - .codec = "ak4554-adc-dac.0", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J, - .cpu_dai = { - .name = "rsnd-dai.1", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI4 */ - { - .name = "AK4554", - .card = "SSI4-AK4554(capture)", - .codec = "ak4554-adc-dac.0", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J, - .cpu_dai = { - .name = "rsnd-dai.2", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI7 */ - { - .name = "AK4554", - .card = "SSI7-AK4554(playback)", - .codec = "ak4554-adc-dac.1", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J, - .cpu_dai = { - .name = "rsnd-dai.3", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI8 */ - { - .name = "AK4554", - .card = "SSI8-AK4554(capture)", - .codec = "ak4554-adc-dac.1", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J, - .cpu_dai = { - .name = "rsnd-dai.4", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - } -}; - -static const struct pinctrl_map bockw_pinctrl_map[] = { - /* AUDIO */ - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "audio_clk_a", "audio_clk"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "audio_clk_b", "audio_clk"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi34_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi3_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi4_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi5_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi5_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi6_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi6_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi78_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi7_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi8_data", "ssi"), - /* Ether */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778", - "ether_rmii", "ether"), - /* HSPI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778", - "hspi0_a", "hspi0"), - /* MMC */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", - "mmc_data8", "mmc"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", - "mmc_ctrl", "mmc"), - /* SCIF0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_data_a", "scif0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_ctrl", "scif0"), - /* USB */ - PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", - "usb0", "usb0"), - PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778", - "usb1", "usb1"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_wp", "sdhi0"), - /* VIN0 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778", - "vin0_clk", "vin0"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778", - "vin0_data8", "vin0"), - /* VIN1 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778", - "vin1_clk", "vin1"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778", - "vin1_data8", "vin1"), -}; - -#define PFC 0xfffc0000 -#define PUPR4 0x110 -static void __init bockw_init(void) -{ - void __iomem *base; - struct clk *clk; - struct platform_device *pdev; - int i; - - r8a7778_clock_init(); - r8a7778_init_irq_extpin(1); - r8a7778_add_standard_devices(); - - platform_device_register_full(ðer_info); - - platform_device_register_full(&vin0_info); - /* VIN1 has a pin conflict with Ether */ - if (!IS_ENABLED(CONFIG_SH_ETH)) - platform_device_register_full(&vin1_info); - platform_device_register_data(NULL, "soc-camera-pdrv", 0, - &iclink0_ml86v7667, - sizeof(iclink0_ml86v7667)); - platform_device_register_data(NULL, "soc-camera-pdrv", 1, - &iclink1_ml86v7667, - sizeof(iclink1_ml86v7667)); - - i2c_register_board_info(0, i2c0_devices, - ARRAY_SIZE(i2c0_devices)); - spi_register_board_info(spi_board_info, - ARRAY_SIZE(spi_board_info)); - pinctrl_register_mappings(bockw_pinctrl_map, - ARRAY_SIZE(bockw_pinctrl_map)); - r8a7778_pinmux_init(); - - platform_device_register_resndata( - NULL, "sh_mmcif", -1, - mmc_resources, ARRAY_SIZE(mmc_resources), - &sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data)); - - platform_device_register_resndata( - NULL, "rcar_usb_phy", -1, - usb_phy_resources, - ARRAY_SIZE(usb_phy_resources), - &usb_phy_platform_data, - sizeof(struct rcar_phy_platform_data)); - - regulator_register_fixed(0, dummy_supplies, - ARRAY_SIZE(dummy_supplies)); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - - /* for SMSC */ - fpga = ioremap_nocache(FPGA, SZ_1M); - if (fpga) { - /* - * CAUTION - * - * IRQ0/1 is cascaded interrupt from FPGA. - * it should be cared in the future - * Now, it is assuming IRQ0 was used only from SMSC. - */ - u16 val = ioread16(fpga + IRQ0MR); - val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, fpga + IRQ0MR); - - platform_device_register_resndata( - NULL, "smsc911x", -1, - smsc911x_resources, ARRAY_SIZE(smsc911x_resources), - &smsc911x_data, sizeof(smsc911x_data)); - } - - /* for SDHI */ - base = ioremap_nocache(PFC, 0x200); - if (base) { - /* - * FIXME - * - * SDHI CD/WP pin needs pull-up - */ - iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4); - iounmap(base); - - platform_device_register_resndata( - NULL, "sh_mobile_sdhi", 0, - sdhi0_resources, ARRAY_SIZE(sdhi0_resources), - &sdhi0_info, sizeof(struct tmio_mmc_data)); - } - - /* for Audio */ - rsnd_codec_power(5, 1); /* enable ak4642 */ - - platform_device_register_simple( - "ak4554-adc-dac", 0, NULL, 0); - - platform_device_register_simple( - "ak4554-adc-dac", 1, NULL, 0); - - pdev = platform_device_register_resndata( - NULL, "rcar_sound", -1, - rsnd_resources, ARRAY_SIZE(rsnd_resources), - &rsnd_info, sizeof(rsnd_info)); - - clk = clk_get(&pdev->dev, "clk_b"); - clk_set_rate(clk, 24576000); - clk_put(clk); - - for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) { - struct platform_device_info cardinfo = { - .name = "asoc-simple-card", - .id = i, - .data = &rsnd_card_info[i], - .size_data = sizeof(struct asoc_simple_card_info), - .dma_mask = DMA_BIT_MASK(32), - }; - - platform_device_register_full(&cardinfo); - } -} - -static void __init bockw_init_late(void) -{ - r8a7778_init_late(); - ADD_USB_FUNC_DEVICE_IF_POSSIBLE(); -} - -static const char *const bockw_boards_compat_dt[] __initconst = { - "renesas,bockw", - NULL, -}; - -DT_MACHINE_START(BOCKW_DT, "bockw") - .init_early = shmobile_init_delay, - .init_irq = r8a7778_init_irq_dt, - .init_machine = bockw_init, - .dt_compat = bockw_boards_compat_dt, - .init_late = bockw_init_late, -MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c deleted file mode 100644 index e8510c35558c..000000000000 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * r8a7778 clock framework support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * based on r8a7779 - * - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * MD MD MD MD PLLA PLLB EXTAL clki clkz - * 19 18 12 11 (HMz) (MHz) (MHz) - *---------------------------------------------------------------------------- - * 1 0 0 0 x21 x21 38.00 800 800 - * 1 0 0 1 x24 x24 33.33 800 800 - * 1 0 1 0 x28 x28 28.50 800 800 - * 1 0 1 1 x32 x32 25.00 800 800 - * 1 1 0 1 x24 x21 33.33 800 700 - * 1 1 1 0 x28 x21 28.50 800 600 - * 1 1 1 1 x32 x24 25.00 800 600 - */ - -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include "clock.h" -#include "common.h" - -#define MSTPCR0 IOMEM(0xffc80030) -#define MSTPCR1 IOMEM(0xffc80034) -#define MSTPCR3 IOMEM(0xffc8003c) -#define MSTPSR1 IOMEM(0xffc80044) -#define MSTPSR4 IOMEM(0xffc80048) -#define MSTPSR6 IOMEM(0xffc8004c) -#define MSTPCR4 IOMEM(0xffc80050) -#define MSTPCR5 IOMEM(0xffc80054) -#define MSTPCR6 IOMEM(0xffc80058) -#define MODEMR 0xFFCC0020 - -#define MD(nr) BIT(nr) - -/* ioremap() through clock mapping mandatory to avoid - * collision with ARM coherent DMA virtual memory range. - */ - -static struct clk_mapping cpg_mapping = { - .phys = 0xffc80000, - .len = 0x80, -}; - -static struct clk extal_clk = { - /* .rate will be updated on r8a7778_clock_init() */ - .mapping = &cpg_mapping, -}; - -static struct clk audio_clk_a = { -}; - -static struct clk audio_clk_b = { -}; - -static struct clk audio_clk_c = { -}; - -/* - * clock ratio of these clock will be updated - * on r8a7778_clock_init() - */ -SH_FIXED_RATIO_CLK_SET(plla_clk, extal_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(pllb_clk, extal_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(i_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s1_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s3_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s4_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(b_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(out_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(p_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(g_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(z_clk, pllb_clk, 1, 1); - -static struct clk *main_clks[] = { - &extal_clk, - &plla_clk, - &pllb_clk, - &i_clk, - &s_clk, - &s1_clk, - &s3_clk, - &s4_clk, - &b_clk, - &out_clk, - &p_clk, - &g_clk, - &z_clk, - &audio_clk_a, - &audio_clk_b, - &audio_clk_c, -}; - -enum { - MSTP531, MSTP530, - MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523, - MSTP331, - MSTP323, MSTP322, MSTP321, - MSTP311, MSTP310, - MSTP309, MSTP308, MSTP307, - MSTP114, - MSTP110, MSTP109, - MSTP100, - MSTP030, - MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, - MSTP016, MSTP015, MSTP012, MSTP011, MSTP010, - MSTP009, MSTP008, MSTP007, - MSTP_NR }; - -static struct clk mstp_clks[MSTP_NR] = { - [MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */ - [MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */ - [MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */ - [MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */ - [MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */ - [MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */ - [MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */ - [MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */ - [MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */ - [MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */ - [MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */ - [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */ - [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */ - [MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */ - [MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */ - [MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */ - [MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */ - [MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */ - [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */ - [MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */ - [MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */ - [MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */ - [MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */ - [MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */ - [MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */ - [MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */ - [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */ - [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */ - [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */ - [MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */ - [MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */ - [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */ - [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */ - [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */ - [MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */ - [MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */ - [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */ - [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */ - [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */ - [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */ -}; - -static struct clk_lookup lookups[] = { - /* main */ - CLKDEV_CON_ID("shyway_clk", &s_clk), - CLKDEV_CON_ID("peripheral_clk", &p_clk), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */ - CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */ - CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */ - CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */ - CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ - CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ - CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */ - CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ - CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */ - CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ - CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */ - CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ - CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */ - CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */ - CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ - CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ - CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ - CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ - CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ - CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ - CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */ - CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ - CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */ - CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ - CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */ - CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ - CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */ - CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */ - - CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a), - CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b), - CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c), - CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk), - CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]), - CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]), - CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]), - CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]), - CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]), - CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), - CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), - CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), - CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]), - CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]), - CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]), - CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]), - CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]), - CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]), - CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]), - CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]), - CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]), - CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]), - CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]), -}; - -void __init r8a7778_clock_init(void) -{ - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; - int k, ret = 0; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - - switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) { - case MD(19): - extal_clk.rate = 38000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 21, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(11): - extal_clk.rate = 33333333; - SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1); - break; - case MD(19) | MD(12): - extal_clk.rate = 28500000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 28, 1); - break; - case MD(19) | MD(12) | MD(11): - extal_clk.rate = 25000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 32, 1); - break; - case MD(19) | MD(18) | MD(11): - extal_clk.rate = 33333333; - SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(18) | MD(12): - extal_clk.rate = 28500000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(18) | MD(12) | MD(11): - extal_clk.rate = 25000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1); - break; - default: - BUG(); - } - - if (mode & MD(1)) { - SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1); - SH_CLK_SET_RATIO(&s_clk_ratio, 1, 3); - SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 6); - SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&p_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12); - if (mode & MD(2)) { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 18); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 18); - } else { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12); - } - } else { - SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1); - SH_CLK_SET_RATIO(&s_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&p_clk_ratio, 1, 16); - SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12); - if (mode & MD(2)) { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 16); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 16); - } else { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12); - } - } - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup r8a7778 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c deleted file mode 100644 index 68c2d06d0eaa..000000000000 --- a/arch/arm/mach-shmobile/clock.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * SH-Mobile Clock Framework - * - * Copyright (C) 2010 Magnus Damm - * - * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sh_clk.h> - -#include "clock.h" -#include "common.h" - -unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk) -{ - struct clk_ratio *p = clk->priv; - - return clk->parent->rate / p->div * p->mul; -}; - -struct sh_clk_ops shmobile_fixed_ratio_clk_ops = { - .recalc = shmobile_fixed_ratio_clk_recalc, -}; - -int __init shmobile_clk_init(void) -{ - /* Kick the child clocks.. */ - recalculate_root_clocks(); - - /* Enable the necessary init clocks */ - clk_enable_init_clocks(); - - return 0; -} diff --git a/arch/arm/mach-shmobile/clock.h b/arch/arm/mach-shmobile/clock.h deleted file mode 100644 index cf3552ea1019..000000000000 --- a/arch/arm/mach-shmobile/clock.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef CLOCK_H -#define CLOCK_H - -/* legacy clock implementation */ - -struct clk; -unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk); -extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; - -/* clock ratio */ -struct clk_ratio { - int mul; - int div; -}; - -#define SH_CLK_RATIO(name, m, d) \ -static struct clk_ratio name ##_ratio = { \ - .mul = m, \ - .div = d, \ -} - -#define SH_FIXED_RATIO_CLKg(name, p, r) \ -struct clk name = { \ - .parent = &p, \ - .ops = &shmobile_fixed_ratio_clk_ops,\ - .priv = &r ## _ratio, \ -} - -#define SH_FIXED_RATIO_CLK(name, p, r) \ -static SH_FIXED_RATIO_CLKg(name, p, r) - -#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \ - SH_CLK_RATIO(name, m, d); \ - SH_FIXED_RATIO_CLK(name, p, name) - -#define SH_CLK_SET_RATIO(p, m, d) \ -do { \ - (p)->mul = m; \ - (p)->div = d; \ -} while (0) - -#endif diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 8d27ec546a35..9cb11215ceba 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -1,10 +1,7 @@ #ifndef __ARCH_MACH_COMMON_H #define __ARCH_MACH_COMMON_H -extern void shmobile_earlytimer_init(void); extern void shmobile_init_delay(void); -struct twd_local_timer; -extern void shmobile_setup_console(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; extern unsigned long shmobile_boot_arg; @@ -18,8 +15,6 @@ extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); -struct clk; -extern int shmobile_clk_init(void); extern struct platform_suspend_ops shmobile_suspend_ops; #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c deleted file mode 100644 index e329ccbd0a67..000000000000 --- a/arch/arm/mach-shmobile/console.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * SH-Mobile Console - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/mach/map.h> -#include "common.h" - -void __init shmobile_setup_console(void) -{ - parse_early_param(); - - /* Let earlyprintk output early console messages */ - early_platform_driver_probe("earlyprintk", 1, 1); -} diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h deleted file mode 100644 index 40b2ad4ca5b4..000000000000 --- a/arch/arm/mach-shmobile/intc.h +++ /dev/null @@ -1,295 +0,0 @@ -#ifndef __ASM_MACH_INTC_H -#define __ASM_MACH_INTC_H -#include <linux/sh_intc.h> - -#define INTC_IRQ_PINS_ENUM_16L(p) \ - p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \ - p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 - -#define INTC_IRQ_PINS_ENUM_16H(p) \ - p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \ - p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 - -#define INTC_IRQ_PINS_VECT_16L(p, vect) \ - vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \ - vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \ - vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \ - vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \ - vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \ - vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \ - vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \ - vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0) - -#define INTC_IRQ_PINS_VECT_16H(p, vect) \ - vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \ - vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \ - vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \ - vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \ - vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \ - vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \ - vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \ - vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0) - -#define INTC_IRQ_PINS_MASK_16L(p, base) \ - { base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_MASK_16H(p, base) \ - { base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_PRIO_16L(p, base) \ - { base + 0x10, 0, 32, 4, /* INTPRI00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x14, 0, 32, 4, /* INTPRI10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_PRIO_16H(p, base) \ - { base + 0x18, 0, 32, 4, /* INTPRI20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x1c, 0, 32, 4, /* INTPRI30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_SENSE_16L(p, base) \ - { base + 0x00, 32, 4, /* ICR1A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x04, 32, 4, /* ICR2A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_SENSE_16H(p, base) \ - { base + 0x08, 32, 4, /* ICR3A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x0c, 32, 4, /* ICR4A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_ACK_16L(p, base) \ - { base + 0x20, 0, 8, /* INTREQ00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x24, 0, 8, /* INTREQ10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_ACK_16H(p, base) \ - { base + 0x28, 0, 8, /* INTREQ20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x2c, 0, 8, /* INTREQ30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_16(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x64, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16L(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16L(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16L(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16L(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16L(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16L(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_IRQ_PINS_16H(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x64, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16H(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16H(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16H(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16H(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16H(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16H(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_IRQ_PINS_32(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x6c, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16L(p), \ - INTC_IRQ_PINS_ENUM_16H(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16L(p, vect), \ - INTC_IRQ_PINS_VECT_16H(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16L(p, base), \ - INTC_IRQ_PINS_MASK_16H(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16L(p, base), \ - INTC_IRQ_PINS_PRIO_16H(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16L(p, base), \ - INTC_IRQ_PINS_SENSE_16H(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16L(p, base), \ - INTC_IRQ_PINS_ACK_16H(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_PINT_E_EMPTY -#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0, -#define INTC_PINT_E(p) \ - PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \ - PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7, - -#define INTC_PINT_V_NONE -#define INTC_PINT_V(p, vect) \ - vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \ - vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \ - vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \ - vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7), - -#define INTC_PINT(p, mask_reg, sense_base, str, \ - enums_1, enums_2, enums_3, enums_4, \ - vect_1, vect_2, vect_3, vect_4, \ - mask_a, mask_b, mask_c, mask_d, \ - sense_a, sense_b, sense_c, sense_d) \ - \ -enum { \ - PINT ## p ## _UNUSED = 0, \ - enums_1 enums_2 enums_3 enums_4 \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - vect_1 vect_2 vect_3 vect_4 \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - { mask_reg, 0, 32, /* PINTER */ \ - { mask_a mask_b mask_c mask_d } } \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - { sense_base + 0x00, 16, 2, /* PINTCR */ \ - { sense_a } }, \ - { sense_base + 0x04, 16, 2, /* PINTCR */ \ - { sense_b } }, \ - { sense_base + 0x08, 16, 2, /* PINTCR */ \ - { sense_c } }, \ - { sense_base + 0x0c, 16, 2, /* PINTCR */ \ - { sense_d } }, \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, NULL, \ - p ## _sense_registers, NULL), \ -} - -/* INTCS */ -#define INTCS_VECT_BASE 0x3400 -#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) -#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) - -#endif /* __ASM_MACH_INTC_H */ diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 4e54512bee30..911884f7e28b 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -88,7 +88,7 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit) static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit), struct rcar_apmu_config *apmu_config, int num) { - u32 id; + int id; int k; int bit, index; bool is_allowed; @@ -170,7 +170,7 @@ static inline void cpu_enter_lowpower_a15(void) dsb(); } -void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) +static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) { /* Select next sleep mode using the APMU */ diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index 47a862e7f8ba..14c42a1bdf1e 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -9,20 +9,8 @@ * for more details. */ -#include <linux/pm.h> -#include <linux/suspend.h> -#include <linux/err.h> -#include <linux/pm_clock.h> -#include <linux/pm_domain.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/console.h> - #include <asm/io.h> -#include "common.h" #include "pm-rcar.h" #include "r8a7779.h" @@ -30,17 +18,6 @@ #define SYSCIER 0x0c #define SYSCIMR 0x10 -struct r8a7779_pm_domain { - struct generic_pm_domain genpd; - struct rcar_sysc_ch ch; -}; - -static inline -const struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d) -{ - return &container_of(d, struct r8a7779_pm_domain, genpd)->ch; -} - #if defined(CONFIG_PM) || defined(CONFIG_SMP) static void __init r8a7779_sysc_init(void) @@ -58,82 +35,6 @@ static inline void r8a7779_sysc_init(void) {} #endif /* CONFIG_PM || CONFIG_SMP */ -#ifdef CONFIG_PM - -static int pd_power_down(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_down(to_r8a7779_ch(genpd)); -} - -static int pd_power_up(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_up(to_r8a7779_ch(genpd)); -} - -static bool pd_is_off(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_is_off(to_r8a7779_ch(genpd)); -} - -static bool pd_active_wakeup(struct device *dev) -{ - return true; -} - -static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd) -{ - struct generic_pm_domain *genpd = &r8a7779_pd->genpd; - - pm_genpd_init(genpd, NULL, false); - genpd->dev_ops.active_wakeup = pd_active_wakeup; - genpd->power_off = pd_power_down; - genpd->power_on = pd_power_up; - - if (pd_is_off(&r8a7779_pd->genpd)) - pd_power_up(&r8a7779_pd->genpd); -} - -static struct r8a7779_pm_domain r8a7779_pm_domains[] = { - { - .genpd.name = "SH4A", - .ch = { - .chan_offs = 0x80, /* PWRSR1 .. PWRER1 */ - .isr_bit = 16, /* SH4A */ - }, - }, - { - .genpd.name = "SGX", - .ch = { - .chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */ - .isr_bit = 20, /* SGX */ - }, - }, - { - .genpd.name = "VDP1", - .ch = { - .chan_offs = 0x100, /* PWRSR3 .. PWRER3 */ - .isr_bit = 21, /* VDP */ - }, - }, - { - .genpd.name = "IMPX3", - .ch = { - .chan_offs = 0x140, /* PWRSR4 .. PWRER4 */ - .isr_bit = 24, /* IMP */ - }, - }, -}; - -void __init r8a7779_init_pm_domains(void) -{ - int j; - - for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++) - r8a7779_init_pm_domain(&r8a7779_pm_domains[j]); -} - -#endif /* CONFIG_PM */ - void __init r8a7779_pm_init(void) { static int once; diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index a5b96b990aea..424155b0cfe9 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -342,8 +342,10 @@ static int __init rmobile_add_pm_domains(void __iomem *base, } pd = kzalloc(sizeof(*pd), GFP_KERNEL); - if (!pd) + if (!pd) { + of_node_put(np); return -ENOMEM; + } pd->genpd.name = np->name; pd->base = base; diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h index 30a4a421ee31..8146bb6d7237 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.h +++ b/arch/arm/mach-shmobile/pm-rmobile.h @@ -12,10 +12,6 @@ #include <linux/pm_domain.h> -#define DEFAULT_DEV_LATENCY_NS 250000 - -struct platform_device; - struct rmobile_pm_domain { struct generic_pm_domain genpd; struct dev_power_governor *gov; @@ -26,9 +22,4 @@ struct rmobile_pm_domain { bool no_debug; }; -struct pm_domain_device { - const char *domain_name; - struct platform_device *pdev; -}; - #endif /* PM_RMOBILE_H */ diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h deleted file mode 100644 index f64fedb1f2cc..000000000000 --- a/arch/arm/mach-shmobile/r8a7778.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_R8A7778_H__ -#define __ASM_R8A7778_H__ - -#include <linux/sh_eth.h> - -/* HPB-DMA slave IDs */ -enum { - HPBDMA_SLAVE_DUMMY, - HPBDMA_SLAVE_SDHI0_TX, - HPBDMA_SLAVE_SDHI0_RX, - HPBDMA_SLAVE_SSI0_TX, - HPBDMA_SLAVE_SSI0_RX, - HPBDMA_SLAVE_SSI1_TX, - HPBDMA_SLAVE_SSI1_RX, - HPBDMA_SLAVE_SSI2_TX, - HPBDMA_SLAVE_SSI2_RX, - HPBDMA_SLAVE_SSI3_TX, - HPBDMA_SLAVE_SSI3_RX, - HPBDMA_SLAVE_SSI4_TX, - HPBDMA_SLAVE_SSI4_RX, - HPBDMA_SLAVE_SSI5_TX, - HPBDMA_SLAVE_SSI5_RX, - HPBDMA_SLAVE_SSI6_TX, - HPBDMA_SLAVE_SSI6_RX, - HPBDMA_SLAVE_SSI7_TX, - HPBDMA_SLAVE_SSI7_RX, - HPBDMA_SLAVE_SSI8_TX, - HPBDMA_SLAVE_SSI8_RX, - HPBDMA_SLAVE_HPBIF0_TX, - HPBDMA_SLAVE_HPBIF0_RX, - HPBDMA_SLAVE_HPBIF1_TX, - HPBDMA_SLAVE_HPBIF1_RX, - HPBDMA_SLAVE_HPBIF2_TX, - HPBDMA_SLAVE_HPBIF2_RX, - HPBDMA_SLAVE_HPBIF3_TX, - HPBDMA_SLAVE_HPBIF3_RX, - HPBDMA_SLAVE_HPBIF4_TX, - HPBDMA_SLAVE_HPBIF4_RX, - HPBDMA_SLAVE_HPBIF5_TX, - HPBDMA_SLAVE_HPBIF5_RX, - HPBDMA_SLAVE_HPBIF6_TX, - HPBDMA_SLAVE_HPBIF6_RX, - HPBDMA_SLAVE_HPBIF7_TX, - HPBDMA_SLAVE_HPBIF7_RX, - HPBDMA_SLAVE_HPBIF8_TX, - HPBDMA_SLAVE_HPBIF8_RX, - HPBDMA_SLAVE_USBFUNC_TX, - HPBDMA_SLAVE_USBFUNC_RX, -}; - -extern void r8a7778_add_standard_devices(void); -extern void r8a7778_add_standard_devices_dt(void); -extern void r8a7778_add_dt_devices(void); - -extern void r8a7778_init_late(void); -extern void r8a7778_init_irq_dt(void); -extern void r8a7778_clock_init(void); -extern void r8a7778_init_irq_extpin(int irlm); -extern void r8a7778_init_irq_extpin_dt(int irlm); -extern void r8a7778_pinmux_init(void); - -extern int r8a7778_usb_phy_power(bool enable); - -#endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h index db303f76704e..e1aaa2ef9376 100644 --- a/arch/arm/mach-shmobile/r8a7779.h +++ b/arch/arm/mach-shmobile/r8a7779.h @@ -1,16 +1,8 @@ #ifndef __ASM_R8A7779_H__ #define __ASM_R8A7779_H__ -#include <linux/sh_clk.h> - extern void r8a7779_pm_init(void); -#ifdef CONFIG_PM -extern void __init r8a7779_init_pm_domains(void); -#else -static inline void r8a7779_init_pm_domains(void) {} -#endif /* CONFIG_PM */ - extern struct smp_operations r8a7779_smp_ops; #endif /* __ASM_R8A7779_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index b9116c81e54b..0ab9d3272875 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -16,35 +16,16 @@ */ #include <linux/clk/shmobile.h> -#include <linux/kernel.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/platform_data/dma-rcar-hpbdma.h> -#include <linux/platform_data/gpio-rcar.h> -#include <linux/platform_data/irq-renesas-intc-irqpin.h> -#include <linux/platform_device.h> #include <linux/irqchip.h> -#include <linux/serial_sci.h> -#include <linux/sh_timer.h> -#include <linux/pm_runtime.h> -#include <linux/usb/phy.h> -#include <linux/usb/hcd.h> -#include <linux/usb/ehci_pdriver.h> -#include <linux/usb/ohci_pdriver.h> -#include <linux/dma-mapping.h> #include <asm/mach/arch.h> -#include <asm/hardware/cache-l2x0.h> #include "common.h" #include "irqs.h" -#include "r8a7778.h" #define MODEMR 0xffcc0020 -#ifdef CONFIG_COMMON_CLK static void __init r8a7778_timer_init(void) { u32 mode; @@ -55,555 +36,21 @@ static void __init r8a7778_timer_init(void) iounmap(modemr); r8a7778_clocks_init(mode); } -#endif -/* SCIF */ -#define R8A7778_SCIF(index, baseaddr, irq) \ -static struct plat_sci_port scif##index##_platform_data = { \ - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \ - .type = PORT_SCIF, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq), \ -} - -R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66)); -R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67)); -R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68)); -R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69)); -R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a)); -R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b)); - -#define r8a7778_register_scif(index) \ - platform_device_register_resndata(NULL, "sh-sci", index, \ - scif##index##_resources, \ - ARRAY_SIZE(scif##index##_resources), \ - &scif##index##_platform_data, \ - sizeof(scif##index##_platform_data)) - -/* TMU */ -static struct sh_timer_config sh_tmu0_platform_data = { - .channels_mask = 7, -}; - -static struct resource sh_tmu0_resources[] = { - DEFINE_RES_MEM(0xffd80000, 0x30), - DEFINE_RES_IRQ(gic_iid(0x40)), - DEFINE_RES_IRQ(gic_iid(0x41)), - DEFINE_RES_IRQ(gic_iid(0x42)), -}; - -#define r8a7778_register_tmu(idx) \ - platform_device_register_resndata( \ - NULL, "sh-tmu", idx, \ - sh_tmu##idx##_resources, \ - ARRAY_SIZE(sh_tmu##idx##_resources), \ - &sh_tmu##idx##_platform_data, \ - sizeof(sh_tmu##idx##_platform_data)) - -int r8a7778_usb_phy_power(bool enable) -{ - static struct usb_phy *phy = NULL; - int ret = 0; - - if (!phy) - phy = usb_get_phy(USB_PHY_TYPE_USB2); - - if (IS_ERR(phy)) { - pr_err("kernel doesn't have usb phy driver\n"); - return PTR_ERR(phy); - } - - if (enable) - ret = usb_phy_init(phy); - else - usb_phy_shutdown(phy); - - return ret; -} - -/* USB */ -static int usb_power_on(struct platform_device *pdev) -{ - int ret = r8a7778_usb_phy_power(true); - - if (ret) - return ret; - - pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); - - return 0; -} - -static void usb_power_off(struct platform_device *pdev) -{ - if (r8a7778_usb_phy_power(false)) - return; - - pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); -} - -static int ehci_init_internal_buffer(struct usb_hcd *hcd) -{ - /* - * Below are recommended values from the datasheet; - * see [USB :: Setting of EHCI Internal Buffer]. - */ - /* EHCI IP internal buffer setting */ - iowrite32(0x00ff0040, hcd->regs + 0x0094); - /* EHCI IP internal buffer enable */ - iowrite32(0x00000001, hcd->regs + 0x009C); - - return 0; -} - -static struct usb_ehci_pdata ehci_pdata __initdata = { - .power_on = usb_power_on, - .power_off = usb_power_off, - .power_suspend = usb_power_off, - .pre_setup = ehci_init_internal_buffer, -}; - -static struct resource ehci_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70000, 0x400), - DEFINE_RES_IRQ(gic_iid(0x4c)), -}; - -static struct usb_ohci_pdata ohci_pdata __initdata = { - .power_on = usb_power_on, - .power_off = usb_power_off, - .power_suspend = usb_power_off, -}; - -static struct resource ohci_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70400, 0x400), - DEFINE_RES_IRQ(gic_iid(0x4c)), -}; - -#define USB_PLATFORM_INFO(hci) \ -static struct platform_device_info hci##_info __initdata = { \ - .name = #hci "-platform", \ - .id = -1, \ - .res = hci##_resources, \ - .num_res = ARRAY_SIZE(hci##_resources), \ - .data = &hci##_pdata, \ - .size_data = sizeof(hci##_pdata), \ - .dma_mask = DMA_BIT_MASK(32), \ -} - -USB_PLATFORM_INFO(ehci); -USB_PLATFORM_INFO(ohci); - -/* PFC/GPIO */ -static struct resource pfc_resources[] __initdata = { - DEFINE_RES_MEM(0xfffc0000, 0x118), -}; - -#define R8A7778_GPIO(idx) \ -static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \ - DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ - DEFINE_RES_IRQ(gic_iid(0x87)), \ -}; \ - \ -static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \ - .gpio_base = 32 * (idx), \ - .irq_base = GPIO_IRQ_BASE(idx), \ - .number_of_pins = 32, \ - .pctl_name = "pfc-r8a7778", \ -} - -R8A7778_GPIO(0); -R8A7778_GPIO(1); -R8A7778_GPIO(2); -R8A7778_GPIO(3); -R8A7778_GPIO(4); - -#define r8a7778_register_gpio(idx) \ - platform_device_register_resndata( \ - NULL, "gpio_rcar", idx, \ - r8a7778_gpio##idx##_resources, \ - ARRAY_SIZE(r8a7778_gpio##idx##_resources), \ - &r8a7778_gpio##idx##_platform_data, \ - sizeof(r8a7778_gpio##idx##_platform_data)) - -void __init r8a7778_pinmux_init(void) -{ - platform_device_register_simple( - "pfc-r8a7778", -1, - pfc_resources, - ARRAY_SIZE(pfc_resources)); - - r8a7778_register_gpio(0); - r8a7778_register_gpio(1); - r8a7778_register_gpio(2); - r8a7778_register_gpio(3); - r8a7778_register_gpio(4); -}; - -/* I2C */ -static struct resource i2c_resources[] __initdata = { - /* I2C0 */ - DEFINE_RES_MEM(0xffc70000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x63)), - /* I2C1 */ - DEFINE_RES_MEM(0xffc71000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6e)), - /* I2C2 */ - DEFINE_RES_MEM(0xffc72000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6c)), - /* I2C3 */ - DEFINE_RES_MEM(0xffc73000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6d)), -}; - -static void __init r8a7778_register_i2c(int id) -{ - BUG_ON(id < 0 || id > 3); - - platform_device_register_simple( - "i2c-rcar", id, - i2c_resources + (2 * id), 2); -} - -/* HSPI */ -static struct resource hspi_resources[] __initdata = { - /* HSPI0 */ - DEFINE_RES_MEM(0xfffc7000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x5f)), - /* HSPI1 */ - DEFINE_RES_MEM(0xfffc8000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x74)), - /* HSPI2 */ - DEFINE_RES_MEM(0xfffc6000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x75)), -}; - -static void __init r8a7778_register_hspi(int id) -{ - BUG_ON(id < 0 || id > 2); - - platform_device_register_simple( - "sh-hspi", id, - hspi_resources + (2 * id), 2); -} - -void __init r8a7778_add_dt_devices(void) -{ -#ifdef CONFIG_CACHE_L2X0 - void __iomem *base = ioremap_nocache(0xf0100000, 0x1000); - if (base) { - /* - * Shared attribute override enable, 64K*16way - * don't call iounmap(base) - */ - l2x0_init(base, 0x00400000, 0xc20f0fff); - } -#endif -} - -/* HPB-DMA */ - -/* Asynchronous mode register (ASYNCMDR) bits */ -#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ - -#define HPBDMA_SSI(_id) \ -{ \ - .id = HPBDMA_SLAVE_SSI## _id ##_TX, \ - .addr = 0xffd91008 + (_id * 0x40), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DMDL | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = _id + (_id << 8), \ - .dma_ch = (28 + _id), \ -}, { \ - .id = HPBDMA_SLAVE_SSI## _id ##_RX, \ - .addr = 0xffd9100c + (_id * 0x40), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SMDL | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = _id + (_id << 8), \ - .dma_ch = (28 + _id), \ -} - -#define HPBDMA_HPBIF(_id) \ -{ \ - .id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \ - .addr = 0xffda0000 + (_id * 0x1000), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DMDL | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = 0x1111, \ - .dma_ch = (28 + _id), \ -}, { \ - .id = HPBDMA_SLAVE_HPBIF## _id ##_RX, \ - .addr = 0xffda0000 + (_id * 0x1000), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SMDL | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = 0x1111, \ - .dma_ch = (28 + _id), \ -} - -static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { - { - .id = HPBDMA_SLAVE_SDHI0_TX, - .addr = 0xffe4c000 + 0x30, - .dcr = HPB_DMAE_DCR_SPDS_16BIT | - HPB_DMAE_DCR_DMDL | - HPB_DMAE_DCR_DPDS_16BIT, - .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | - HPB_DMAE_ASYNCRSTR_ASRST22 | - HPB_DMAE_ASYNCRSTR_ASRST23, - .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI, - .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK, - .port = 0x0D0C, - .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, - .dma_ch = 21, - }, { - .id = HPBDMA_SLAVE_SDHI0_RX, - .addr = 0xffe4c000 + 0x30, - .dcr = HPB_DMAE_DCR_SMDL | - HPB_DMAE_DCR_SPDS_16BIT | - HPB_DMAE_DCR_DPDS_16BIT, - .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | - HPB_DMAE_ASYNCRSTR_ASRST22 | - HPB_DMAE_ASYNCRSTR_ASRST23, - .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI, - .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK, - .port = 0x0D0C, - .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, - .dma_ch = 22, - }, { - .id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */ - .addr = 0xffe60018, - .dcr = HPB_DMAE_DCR_SPDS_32BIT | - HPB_DMAE_DCR_DMDL | - HPB_DMAE_DCR_DPDS_32BIT, - .port = 0x0000, - .dma_ch = 14, - }, { - .id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */ - .addr = 0xffe6001c, - .dcr = HPB_DMAE_DCR_SMDL | - HPB_DMAE_DCR_SPDS_32BIT | - HPB_DMAE_DCR_DPDS_32BIT, - .port = 0x0101, - .dma_ch = 15, - }, - - HPBDMA_SSI(0), - HPBDMA_SSI(1), - HPBDMA_SSI(2), - HPBDMA_SSI(3), - HPBDMA_SSI(4), - HPBDMA_SSI(5), - HPBDMA_SSI(6), - HPBDMA_SSI(7), - HPBDMA_SSI(8), - - HPBDMA_HPBIF(0), - HPBDMA_HPBIF(1), - HPBDMA_HPBIF(2), - HPBDMA_HPBIF(3), - HPBDMA_HPBIF(4), - HPBDMA_HPBIF(5), - HPBDMA_HPBIF(6), - HPBDMA_HPBIF(7), - HPBDMA_HPBIF(8), -}; - -static const struct hpb_dmae_channel hpb_dmae_channels[] = { - HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */ - HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */ - HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ - HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */ -}; - -static struct hpb_dmae_pdata dma_platform_data __initdata = { - .slaves = hpb_dmae_slaves, - .num_slaves = ARRAY_SIZE(hpb_dmae_slaves), - .channels = hpb_dmae_channels, - .num_channels = ARRAY_SIZE(hpb_dmae_channels), - .ts_shift = { - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - }, - .num_hw_channels = 39, -}; - -static struct resource hpb_dmae_resources[] __initdata = { - /* Channel registers */ - DEFINE_RES_MEM(0xffc08000, 0x1000), - /* Common registers */ - DEFINE_RES_MEM(0xffc09000, 0x170), - /* Asynchronous reset registers */ - DEFINE_RES_MEM(0xffc00300, 4), - /* Asynchronous mode registers */ - DEFINE_RES_MEM(0xffc00400, 4), - /* IRQ for DMA channels */ - DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ), -}; - -static void __init r8a7778_register_hpb_dmae(void) -{ - platform_device_register_resndata(NULL, "hpb-dma-engine", - -1, hpb_dmae_resources, - ARRAY_SIZE(hpb_dmae_resources), - &dma_platform_data, - sizeof(dma_platform_data)); -} - -void __init r8a7778_add_standard_devices(void) -{ - r8a7778_add_dt_devices(); - r8a7778_register_tmu(0); - r8a7778_register_scif(0); - r8a7778_register_scif(1); - r8a7778_register_scif(2); - r8a7778_register_scif(3); - r8a7778_register_scif(4); - r8a7778_register_scif(5); - r8a7778_register_i2c(0); - r8a7778_register_i2c(1); - r8a7778_register_i2c(2); - r8a7778_register_i2c(3); - r8a7778_register_hspi(0); - r8a7778_register_hspi(1); - r8a7778_register_hspi(2); - - r8a7778_register_hpb_dmae(); -} - -void __init r8a7778_init_late(void) -{ - shmobile_init_late(); - platform_device_register_full(&ehci_info); - platform_device_register_full(&ohci_info); -} - -static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = { - .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ - .sense_bitfield_width = 2, -}; - -static struct resource irqpin_resources[] __initdata = { - DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ - DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ - DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ - DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */ - DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */ - DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */ - DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */ - DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */ - DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */ -}; - -void __init r8a7778_init_irq_extpin_dt(int irlm) -{ - void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); - unsigned long tmp; - - if (!icr0) { - pr_warn("r8a7778: unable to setup external irq pin mode\n"); - return; - } - - tmp = ioread32(icr0); - if (irlm) - tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */ - else - tmp &= ~(1 << 23); /* IRL mode - not supported */ - tmp |= (1 << 21); /* LVLMODE = 1 */ - iowrite32(tmp, icr0); - iounmap(icr0); -} - -void __init r8a7778_init_irq_extpin(int irlm) -{ - r8a7778_init_irq_extpin_dt(irlm); - if (irlm) - platform_device_register_resndata( - NULL, "renesas_intc_irqpin", -1, - irqpin_resources, ARRAY_SIZE(irqpin_resources), - &irqpin_platform_data, sizeof(irqpin_platform_data)); -} - -#ifdef CONFIG_USE_OF #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ #define INT2NTSR0 0x00018 /* 0xfe700018 */ #define INT2NTSR1 0x0002c /* 0xfe70002c */ -void __init r8a7778_init_irq_dt(void) + +static void __init r8a7778_init_irq_dt(void) { void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); -#ifdef CONFIG_ARCH_SHMOBILE_LEGACY - void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000); - void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000); -#endif BUG_ON(!base); -#ifdef CONFIG_ARCH_SHMOBILE_LEGACY - gic_init(0, 29, gic_dist_base, gic_cpu_base); -#else irqchip_init(); -#endif + /* route all interrupts to ARM */ __raw_writel(0x73ffffff, base + INT2NTSR0); __raw_writel(0xffffffff, base + INT2NTSR1); @@ -624,10 +71,6 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = shmobile_init_delay, .init_irq = r8a7778_init_irq_dt, .init_late = shmobile_init_late, -#ifdef CONFIG_COMMON_CLK .init_time = r8a7778_timer_init, -#endif .dt_compat = r8a7778_compat_dt, MACHINE_END - -#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/sh-gpio.h b/arch/arm/mach-shmobile/sh-gpio.h deleted file mode 100644 index 2c4141413db9..000000000000 --- a/arch/arm/mach-shmobile/sh-gpio.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Generic GPIO API and pinmux table support - * - * Copyright (c) 2008 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/io.h> - -/* - * FIXME !! - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static inline void __init gpio_direction_none(void __iomem * addr) -{ - __raw_writeb(0x00, addr); -} - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index f1d027aa7a81..c17d4d3881ff 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -77,24 +77,3 @@ void __init shmobile_init_delay(void) shmobile_setup_delay_hz(max_freq, 2, 4); } } - -static void __init shmobile_late_time_init(void) -{ - /* - * Make sure all compiled-in early timers register themselves. - * - * Run probe() for two "earlytimer" devices, these will be the - * clockevents and clocksource devices respectively. In the event - * that only a clockevents device is available, we -ENODEV on the - * clocksource and the jiffies clocksource is used transparently - * instead. No error handling is necessary here. - */ - early_platform_driver_register_all("earlytimer"); - early_platform_driver_probe("earlytimer", 2, 0); -} - -void __init shmobile_earlytimer_init(void) -{ - late_time_init = shmobile_late_time_init; -} - diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c index d97749c642ce..12edd1cf8a12 100644 --- a/arch/arm/mach-spear/hotplug.c +++ b/arch/arm/mach-spear/hotplug.c @@ -80,7 +80,7 @@ static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref spear13xx_cpu_die(unsigned int cpu) +void spear13xx_cpu_die(unsigned int cpu) { int spurious = 0; diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 6fc71f1534b0..1b129899a277 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu) * * Called with IRQs disabled */ -void __ref tegra_cpu_die(unsigned int cpu) +void tegra_cpu_die(unsigned int cpu) { if (!tegra_hotplug_shutdown) { WARN(1, "hotplug is not yet initialized\n"); diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index 2bc00b085e38..1cbed0331fd3 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -21,7 +21,7 @@ * * Called with IRQs disabled */ -void __ref ux500_cpu_die(unsigned int cpu) +void ux500_cpu_die(unsigned int cpu) { /* directly enter low power state, skipping secure registers */ for (;;) { diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index f0ce6b8f5e71..f2fafc10a91d 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -85,7 +85,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref vexpress_cpu_die(unsigned int cpu) +void vexpress_cpu_die(unsigned int cpu) { int spurious = 0; |