diff options
Diffstat (limited to 'arch/arm')
1008 files changed, 37501 insertions, 14044 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db3c5414223e..87b63fde06d7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -165,12 +165,9 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config RWSEM_GENERIC_SPINLOCK - bool - default y - config RWSEM_XCHGADD_ALGORITHM bool + default y config ARCH_HAS_ILOG2_U32 bool @@ -314,6 +311,7 @@ config ARCH_MULTIPLATFORM select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -376,7 +374,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select IRQ_DOMAIN - select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD select PINCTRL select PINCTRL_AT91 if USE_OF @@ -480,6 +477,7 @@ config ARCH_IOP13XX select PCI select PLAT_IOP select VMSPLIT_1G + select SPARSE_IRQ help Support for Intel's IOP13XX (XScale) family of processors. @@ -755,7 +753,7 @@ config ARCH_S3C64XX select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM - select COMMON_CLK + select COMMON_CLK_SAMSUNG select CPU_V6K select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -829,25 +827,6 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS - bool "Samsung EXYNOS" - select ARCH_HAS_CPUFREQ - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB - select ARCH_SPARSEMEM_ENABLE - select ARM_GIC - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_MEMORY_H - select SPARSE_IRQ - select USE_OF - help - Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -951,6 +930,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/mach-axxia/Kconfig" + source "arch/arm/mach-bcm/Kconfig" source "arch/arm/mach-berlin/Kconfig" @@ -1105,11 +1086,6 @@ source "arch/arm/firmware/Kconfig" source arch/arm/mm/Kconfig -config ARM_NR_BANKS - int - default 16 if ARCH_EP93XX - default 8 - config IWMMXT bool "Enable iWMMXt support" depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B @@ -1230,19 +1206,6 @@ config ARM_ERRATA_742231 register of the Cortex-A9 which reduces the linefill issuing capabilities of the processor. -config PL310_ERRATA_588369 - bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" - depends on CACHE_L2X0 - help - The PL310 L2 cache controller implements three types of Clean & - Invalidate maintenance operations: by Physical Address - (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). - They are architecturally defined to behave as the execution of a - clean operation followed immediately by an invalidate operation, - both performing to the same memory location. This functionality - is not correctly implemented in PL310 as clean lines are not - invalidated as a result of these operations. - config ARM_ERRATA_643719 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" depends on CPU_V7 && SMP @@ -1265,17 +1228,6 @@ config ARM_ERRATA_720789 tables. The workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. -config PL310_ERRATA_727915 - bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" - depends on CACHE_L2X0 - help - PL310 implements the Clean & Invalidate by Way L2 cache maintenance - operation (offset 0x7FC). This operation runs in background so that - PL310 can handle normal accesses while it is in progress. Under very - rare circumstances, due to this erratum, write data can be lost when - PL310 treats a cacheable write transaction during a Clean & - Invalidate by Way operation. - config ARM_ERRATA_743622 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" depends on CPU_V7 @@ -1301,21 +1253,6 @@ config ARM_ERRATA_751472 operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. -config PL310_ERRATA_753970 - bool "PL310 errata: cache sync operation may be faulty" - depends on CACHE_PL310 - help - This option enables the workaround for the 753970 PL310 (r3p0) erratum. - - Under some condition the effect of cache sync operation on - the store buffer still remains when the operation completes. - This means that the store buffer is always asked to drain and - this prevents it from merging any further writes. The workaround - is to replace the normal offset of cache sync operation (0x730) - by another offset targeting an unmapped PL310 register 0x740. - This has the same effect as the cache sync operation: store buffer - drain and waiting for all buffers empty. - config ARM_ERRATA_754322 bool "ARM errata: possible faulty MMU translations following an ASID switch" depends on CPU_V7 @@ -1364,18 +1301,6 @@ config ARM_ERRATA_764369 relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. -config PL310_ERRATA_769419 - bool "PL310 errata: no automatic Store Buffer drain" - depends on CACHE_L2X0 - help - On revisions of the PL310 prior to r3p2, the Store Buffer does - not automatically drain. This can cause normal, non-cacheable - writes to be retained when the memory system is idle, leading - to suboptimal I/O performance for drivers using coherent DMA. - This option adds a write barrier to the cpu_idle loop so that, - on systems with an outer cache, the store buffer is drained - explicitly. - config ARM_ERRATA_775420 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" depends on CPU_V7 @@ -1646,9 +1571,9 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX + default 416 if ARCH_SUNXI default 392 if ARCH_U8500 default 352 if ARCH_VT8500 - default 288 if ARCH_SUNXI default 264 if MACH_H4700 default 0 help @@ -2295,6 +2220,11 @@ config ARCH_SUSPEND_POSSIBLE config ARM_CPU_SUSPEND def_bool PM_SLEEP +config ARCH_HIBERNATION_POSSIBLE + bool + depends on MMU + default y if ARCH_SUSPEND_POSSIBLE + endmenu source "net/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index eab8ecbe69c1..8f90595069a1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -317,6 +317,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SL. + config DEBUG_IMX6SX_UART + bool "i.MX6SX Debug UART" + depends on SOC_IMX6SX + help + Say Y here if you want kernel low-level debugging support + on i.MX6SX. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -349,56 +356,40 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART + config DEBUG_MSM_UART + bool "Kernel low-level debugging messages via MSM UART" + depends on ARCH_MSM help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to the serial port on MSM devices. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + ARCH DEBUG_UART_PHYS DEBUG_UART_BASE # + MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 + MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 + MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + MSM7X30 0xaca00000 0xe1000000 UART1 + MSM7X30 0xacb00000 0xe1000000 UART2 + MSM7X30 0xacc00000 0xe1000000 UART3 - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART + config DEBUG_QCOM_UARTDM + bool "Kernel low-level debugging messages via QCOM UARTDM" + depends on ARCH_QCOM help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the serial port on Qualcomm devices. - config DEBUG_MSM8974_UART - bool "Kernel low-level debugging messages via MSM 8974 UART" - depends on ARCH_MSM8974 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8974 devices. + ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + APQ8084 0xf995e000 0xfa75e000 + MSM8X60 0x19c40000 0xf0040000 + MSM8960 0x16440000 0xf0040000 + MSM8974 0xf991e000 0xfa71e000 + + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. config DEBUG_MVEBU_UART bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" @@ -625,6 +616,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -637,6 +629,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -649,6 +642,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -670,6 +664,33 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_S3C2410_UART0 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 0 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART1 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 1 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 1. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART2 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 2 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 2. The port must have been initialised + by the boot-loader before use. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -921,6 +942,13 @@ endchoice config DEBUG_EXYNOS_UART bool +config DEBUG_S3C2410_UART + bool + select DEBUG_S3C24XX_UART + +config DEBUG_S3C24XX_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS @@ -935,13 +963,23 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX51_UART || \ DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART default 1 depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. +config DEBUG_VF_UART_PORT + int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART + default 1 + range 0 3 + depends on SOC_VF610 + help + Choose UART port on which kernel low-level debug messages + should be output. + config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA @@ -950,10 +988,6 @@ config DEBUG_STI_UART bool depends on ARCH_STI -config DEBUG_MSM_UART - bool - depends on ARCH_MSM || ARCH_QCOM - config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 @@ -970,9 +1004,11 @@ config DEBUG_LL_INCLUDE DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART - default "debug/msm.S" if DEBUG_MSM_UART + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART + default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART + default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART @@ -1029,12 +1065,19 @@ config DEBUG_UART_PHYS default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI + default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0x7c0003f8 if FOOTBRIDGE default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART + default 0xa9a00000 if DEBUG_MSM_UART default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN @@ -1050,6 +1093,7 @@ config DEBUG_UART_PHYS ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8b00000 if DEBUG_HI3716_UART + default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART default 0xfe800000 if ARCH_IOP32X default 0xffc02000 if DEBUG_SOCFPGA_UART @@ -1058,11 +1102,13 @@ config DEBUG_UART_PHYS default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC + default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf0009000 if DEBUG_CNS3XXX default 0xf01fb000 if DEBUG_NOMADIK_UART @@ -1075,9 +1121,16 @@ config DEBUG_UART_VIRT default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0xfa71e000 if DEBUG_QCOM_UARTDM default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX @@ -1116,7 +1169,8 @@ config DEBUG_UART_VIRT default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 41c1931f0155..6721fab13734 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -138,10 +138,12 @@ endif textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 +textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 +machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index d1153c8a765a..9448aa0c6686 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -7,6 +7,8 @@ #define do_extend_cmdline 0 #endif +#define NR_BANKS 16 + static int node_offset(void *fdt, const char *node_path) { int offset = fdt_path_offset(fdt, node_path); diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 066b03480b63..3a8b32df6b31 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -60,11 +60,6 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C24XX) - .macro loadsp, rb, tmp - mov \rb, #0x50000000 - add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT - .endm #else .macro loadsp, rb, tmp addruart \rb, \tmp diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 377b7c364033..5986ff63b901 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -50,13 +50,15 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb +dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ - berlin2cd-google-chromecast.dtb + berlin2cd-google-chromecast.dtb \ + berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb @@ -72,10 +74,14 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5260-xyref5260.dtb \ + exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ + exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ - exynos5440-ssdk5440.dtb + exynos5440-ssdk5440.dtb \ + exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb @@ -127,6 +133,9 @@ kirkwood := \ kirkwood-nsa310a.dtb \ kirkwood-openblocks_a6.dtb \ kirkwood-openblocks_a7.dtb \ + kirkwood-openrd-base.dtb \ + kirkwood-openrd-client.dtb \ + kirkwood-openrd-ultimate.dtb \ kirkwood-rd88f6192.dtb \ kirkwood-rd88f6281-a0.dtb \ kirkwood-rd88f6281-a1.dtb \ @@ -157,10 +166,12 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx27-phytec-phycard-s-rdk.dtb \ imx31-bug.dtb \ imx35-eukrea-mbimxsd35-baseboard.dtb \ + imx35-pdk.dtb \ imx50-evk.dtb \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ + imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ imx53-ard.dtb \ imx53-m53evk.dtb \ @@ -179,6 +190,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-gw54xx.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ + imx6dl-phytec-pbab01.dtb \ + imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ @@ -203,6 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + vf610-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ @@ -230,76 +244,84 @@ dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb -dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ - omap2430-sdp.dtb \ +dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \ omap2420-n800.dtb \ omap2420-n810.dtb \ omap2420-n810-wimax.dtb \ + omap2430-sdp.dtb +dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ + am3517-evm.dtb \ + am3517_mt_ventoux.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ + omap3-beagle-xm.dtb \ + omap3-beagle-xm-ab.dtb \ omap3-cm-t3517.dtb \ - omap3-sbc-t3517.dtb \ omap3-cm-t3530.dtb \ - omap3-sbc-t3530.dtb \ omap3-cm-t3730.dtb \ - omap3-sbc-t3730.dtb \ omap3-devkit8000.dtb \ - omap3-beagle-xm.dtb \ - omap3-beagle-xm-ab.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ + omap3-gta04.dtb \ + omap3-igep0020.dtb \ + omap3-igep0030.dtb \ omap3-ldp.dtb \ + omap3-lilly-dbb056.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ omap3-overo-alto35.dtb \ - omap3-overo-storm-alto35.dtb \ omap3-overo-chestnut43.dtb \ - omap3-overo-storm-chestnut43.dtb \ omap3-overo-gallop43.dtb \ - omap3-overo-storm-gallop43.dtb \ omap3-overo-palo43.dtb \ + omap3-overo-storm-alto35.dtb \ + omap3-overo-storm-chestnut43.dtb \ + omap3-overo-storm-gallop43.dtb \ omap3-overo-storm-palo43.dtb \ - omap3-overo-summit.dtb \ omap3-overo-storm-summit.dtb \ - omap3-overo-tobi.dtb \ omap3-overo-storm-tobi.dtb \ - omap3-gta04.dtb \ - omap3-igep0020.dtb \ - omap3-igep0030.dtb \ - omap3-lilly-dbb056.dtb \ - omap3-zoom3.dtb \ - omap4-duovero-parlor.dtb \ + omap3-overo-summit.dtb \ + omap3-overo-tobi.dtb \ + omap3-sbc-t3517.dtb \ + omap3-sbc-t3530.dtb \ + omap3-sbc-t3730.dtb \ + omap3-zoom3.dtb +dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ + am335x-bone.dtb \ + am335x-boneblack.dtb \ + am335x-evm.dtb \ + am335x-evmsk.dtb \ + am335x-nano.dtb +dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ - omap4-var-som.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ - omap5-uevm.dtb \ - am335x-evm.dtb \ - am335x-evmsk.dtb \ - am335x-bone.dtb \ - am335x-boneblack.dtb \ - am335x-nano.dtb \ - am335x-base0033.dtb \ - am3517-craneboard.dtb \ - am3517-evm.dtb \ - am3517_mt_ventoux.dtb \ - am43x-epos-evm.dtb \ - am437x-gp-evm.dtb \ - dra7-evm.dtb -dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb + omap4-var-dvk-om44.dtb \ + omap4-var-stk-om44.dtb +dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ + am437x-gp-evm.dtb +dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ + omap5-sbc-t54.dtb \ + omap5-uevm.dtb +dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \ + dra72-evm.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ + orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-maxtor-shared-storage-2.dtb \ + orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-apq8074-dragonboard.dtb +dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-ifc6410.dtb \ + qcom-apq8074-dragonboard.dtb \ + qcom-apq8084-mtp.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ - r7s72100-genmai.dtb \ - r7s72100-genmai-reference.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ @@ -314,12 +336,14 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ r8a73a4-ape6evm-reference.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ - r7s72100-genmai-reference.dtb \ + r7s72100-genmai.dtb \ + r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ + socfpga_cyclone5_socrates.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb @@ -328,24 +352,33 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ - stih416-b2000.dtb \ +dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ + stih415-b2000.dtb \ stih415-b2020.dtb \ - stih416-b2020.dtb -dtb-$(CONFIG_ARCH_SUNXI) += \ + stih416-b2000.dtb \ + stih416-b2020.dtb \ + stih416-b2020-revE.dtb +dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-inet97fv2.dtb \ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb \ + sun4i-a10-pcduino.dtb +dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ + sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-olinuxino-micro.dtb +dtb-$(CONFIG_MACH_SUN6I) += \ + sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ + sun6i-a31-m9.dtb +dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-i12-tvbox.dtb \ sun7i-a20-olinuxino-micro.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -360,7 +393,11 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ + tegra30-colibri-eval-v3.dtb \ tegra114-dalmore.dtb \ + tegra114-roth.dtb \ + tegra114-tn7.dtb \ + tegra124-jetson-tk1.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 2e7d932887b5..bde1777b62be 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -182,31 +182,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &i2c0 { @@ -280,13 +280,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &mmc1 { diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 6b71ad95a5cf..305975d3f531 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -26,7 +26,6 @@ pinctrl-0 = <&emmc_pins>; bus-width = <8>; status = "okay"; - ti,vcc-aux-disable-is-sleep; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 6028217ace0f..ecb267767cf5 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -268,34 +268,34 @@ lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < - 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ - 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ - 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ - 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ - 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ - 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ - 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ - 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ - 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ - 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ - 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ - 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ - 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ - 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ - 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ - 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ - 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ - 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ - 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ - 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ - 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ - 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ - 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ - 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ - 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ - 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ - 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ - 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ >; }; @@ -330,31 +330,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &i2c1 { @@ -614,12 +614,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab238850a7b2..ab9a34ce524c 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -57,6 +57,17 @@ enable-active-high; }; + vtt_fixed: fixedregulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; @@ -363,31 +374,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &epwmss2 { @@ -484,12 +495,14 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; dual_emac = <1>; + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 9f22c189f636..8a0a72dc7dd7 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -95,6 +95,14 @@ }; }; +&mac { + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; +}; + &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; }; @@ -200,31 +208,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; #include "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 9907b494b99c..a3466455b171 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -344,6 +344,11 @@ &mac { dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 9ccfe508dea2..712edce7d6fb 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -96,47 +96,29 @@ clock-div = <1>; }; - ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk { + ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <0>; reg = <0x0664>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm0_gate_tbclk>; - }; - - ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk { + ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <1>; reg = <0x0664>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm1_gate_tbclk>; - }; - - ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk { + ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <2>; reg = <0x0664>; }; - - ehrpwm2_tbclk: ehrpwm2_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm2_gate_tbclk>; - }; }; &prcm_clocks { clk_32768_ck: clk_32768_ck { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 7ad75b4e0663..4a4e02d0ce9e 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -147,9 +147,6 @@ <0x44e10f90 0x40>; interrupts = <12 13 14>; #dma-cells = <1>; - dma-channels = <64>; - ti,edma-regions = <4>; - ti,edma-slots = <256>; }; gpio0: gpio@44e07000 { @@ -665,6 +662,8 @@ mac: ethernet@4a100000 { compatible = "ti,cpsw"; ti,hwmods = "cpgmac0"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; @@ -688,6 +687,7 @@ */ interrupts = <40 41 42 43>; ranges; + status = "disabled"; davinci_mdio: mdio@4a101000 { compatible = "ti,davinci_mdio"; @@ -696,6 +696,7 @@ ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; reg = <0x4a101000 0x100>; + status = "disabled"; }; cpsw_emac0: slave@4a100200 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d1f8707ff1df..49fa59622254 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -67,11 +67,15 @@ }; ocp { - compatible = "simple-bus"; + compatible = "ti,am4372-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main"; + reg = <0x44000000 0x400000 + 0x44800000 0x400000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; prcm: prcm@44df0000 { compatible = "ti,am4-prcm"; @@ -108,9 +112,6 @@ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - dma-channels = <64>; - ti,edma-regions = <4>; - ti,edma-slots = <256>; }; uart0: serial@44e09000 { @@ -489,6 +490,8 @@ #address-cells = <1>; #size-cells = <1>; ti,hwmods = "cpgmac0"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; status = "disabled"; cpdma_channels = <8>; ale_entries = <1024>; @@ -521,6 +524,12 @@ /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; + + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am43xx-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + }; }; epwmss0: epwmss@48300000 { @@ -735,6 +744,150 @@ #size-cells = <1>; status = "disabled"; }; + + am43xx_control_usb2phy1: control-phy@44e10620 { + compatible = "ti,control-phy-usb2-am437"; + reg = <0x44e10620 0x4>; + reg-names = "power"; + }; + + am43xx_control_usb2phy2: control-phy@0x44e10628 { + compatible = "ti,control-phy-usb2-am437"; + reg = <0x44e10628 0x4>; + reg-names = "power"; + }; + + ocp2scp0: ocp2scp@483a8000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp0"; + + usb2_phy1: phy@483a8000 { + compatible = "ti,am437x-usb2"; + reg = <0x483a8000 0x8000>; + ctrl-module = <&am43xx_control_usb2phy1>; + clocks = <&usb_phy0_always_on_clk32k>, + <&usb_otg_ss0_refclk960m>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + ocp2scp1: ocp2scp@483e8000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp1"; + + usb2_phy2: phy@483e8000 { + compatible = "ti,am437x-usb2"; + reg = <0x483e8000 0x8000>; + ctrl-module = <&am43xx_control_usb2phy2>; + clocks = <&usb_phy1_always_on_clk32k>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + dwc3_1: omap_dwc3@48380000 { + compatible = "ti,am437x-dwc3"; + ti,hwmods = "usb_otg_ss0"; + reg = <0x48380000 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges; + + usb1: usb@48390000 { + compatible = "synopsys,dwc3"; + reg = <0x48390000 0x17000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + dwc3_2: omap_dwc3@483c0000 { + compatible = "ti,am437x-dwc3"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x483c0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges; + + usb2: usb@483d0000 { + compatible = "synopsys,dwc3"; + reg = <0x483d0000 0x17000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + qspi: qspi@47900000 { + compatible = "ti,am4372-qspi"; + reg = <0x47900000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "qspi"; + interrupts = <0 138 0x4>; + num-cs = <4>; + status = "disabled"; + }; + + hdq: hdq@48347000 { + compatible = "ti,am43xx-hdq"; + reg = <0x48347000 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&func_12m_clk>; + clock-names = "fck"; + ti,hwmods = "hdq1w"; + status = "disabled"; + }; + + dss: dss@4832a000 { + compatible = "ti,omap3-dss"; + reg = <0x4832a000 0x200>; + status = "disabled"; + ti,hwmods = "dss_core"; + clocks = <&disp_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@4832a400 { + compatible = "ti,omap3-dispc"; + reg = <0x4832a400 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&disp_clk>; + clock-names = "fck"; + }; + + rfbi: rfbi@4832a800 { + compatible = "ti,omap3-rfbi"; + reg = <0x4832a800 0x100>; + ti,hwmods = "dss_rfbi"; + clocks = <&disp_clk>; + clock-names = "fck"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index a055f7f0f14a..003766c47bbf 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -19,6 +19,10 @@ model = "TI AM437x GP EVM"; compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; + aliases { + display0 = &lcd0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -27,6 +31,17 @@ enable-active-high; }; + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; @@ -53,6 +68,44 @@ 0x02000069 /* LEFT */ 0x0201006c>; /* DOWN */ }; + + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + /* + * SelLCDorHDMI, LOW to select HDMI. This is not really the + * panel's enable GPIO, but we don't have HDMI driver support nor + * support to switch between two displays, so using this gpio as + * panel's enable should be safe. + */ + enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <16>; + hsync-len = <30>; + vback-porch = <10>; + vfront-porch = <22>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; }; &am43xx_pinmux { @@ -81,6 +134,126 @@ 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; + + pixcir_ts_pins: pixcir_ts_pins { + pinctrl-single,pins = < + 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nand_flash_x8: nand_flash_x8 { + pinctrl-single,pins = < + 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */ + 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPIO 5_8 to select LCD / HDMI */ + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; }; &i2c0 { @@ -93,6 +266,20 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + + pixcir_ts@5c { + compatible = "pixcir,pixcir_tangoc"; + pinctrl-names = "default"; + pinctrl-0 = <&pixcir_ts_pins>; + reg = <0x5c>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + + attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + + x-size = <1024>; + y-size = <600>; + }; }; &epwmss0 { @@ -130,3 +317,142 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_flash_x8>; + ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + reg = <0 0 4>; /* device IO registers */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <40>; + gpmc,cs-wr-off-ns = <40>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <25>; + gpmc,adv-wr-off-ns = <25>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <20>; + gpmc,oe-on-ns = <3>; + gpmc,oe-off-ns = <30>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <40>; + gpmc,wr-cycle-ns = <40>; + gpmc,wait-pin = <0>; + gpmc,wait-on-read; + gpmc,wait-on-write; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x00040000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00040000 0x00040000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00080000 0x00040000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x000c0000 0x00040000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00100000 0x00080000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x00180000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x00280000 0x00040000>; + }; + partition@7 { + label = "NAND.u-boot-env.backup1"; + reg = <0x002c0000 0x00040000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00300000 0x00700000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x1f600000>; + }; + }; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 167dbc8494de..19f1f7e87597 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -19,6 +19,10 @@ model = "TI AM43x EPOS EVM"; compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; + aliases { + display0 = &lcd0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -27,6 +31,44 @@ enable-active-high; }; + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + /* + * SelLCDorHDMI, LOW to select HDMI. This is not really the + * panel's enable GPIO, but we don't have HDMI driver support nor + * support to switch between two displays, so using this gpio as + * panel's enable should be safe. + */ + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <16>; + hsync-len = <30>; + vback-porch = <10>; + vfront-porch = <22>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + am43xx_pinmux: pinmux@44e10800 { cpsw_default: cpsw_default { pinctrl-single,pins = < @@ -138,6 +180,69 @@ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; + + qspi1_default: qspi1_default { + pinctrl-single,pins = < + 0x7c (PIN_INPUT_PULLUP | MUX_MODE3) + 0x88 (PIN_INPUT_PULLUP | MUX_MODE2) + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + pixcir_ts_pins: pixcir_ts_pins { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ + >; + }; + + hdq_pins: pinmux_hdq_pins { + pinctrl-single,pins = < + 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ + >; + }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ + 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; }; matrix_keypad: matrix_keypad@0 { @@ -226,7 +331,9 @@ }; pixcir_ts@5c { - compatible = "pixcir,pixcir_ts"; + compatible = "pixcir,pixcir_tangoc"; + pinctrl-names = "default"; + pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; interrupts = <17 0>; @@ -234,7 +341,7 @@ attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; x-size = <1024>; - y-size = <768>; + y-size = <600>; }; }; @@ -341,7 +448,7 @@ }; partition@9 { label = "NAND.file-system"; - reg = <0x00800000 0x1F600000>; + reg = <0x00a00000 0x1f600000>; }; }; }; @@ -367,3 +474,93 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; }; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_default>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first 512KiB + * for a valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&hdq { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 142009cc9332..c7dc9dab93a4 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -11,6 +11,22 @@ sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; + ti,bit-shift = <31>; + reg = <0x0040>; + }; + + crystal_freq_sel_ck: crystal_freq_sel_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; + ti,bit-shift = <29>; + reg = <0x0040>; + }; + + sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; @@ -87,6 +103,54 @@ clock-mult = <1>; clock-div = <1>; }; + + ehrpwm0_tbclk: ehrpwm0_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <0>; + reg = <0x0664>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + reg = <0x0664>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; + + ehrpwm3_tbclk: ehrpwm3_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <4>; + reg = <0x0664>; + }; + + ehrpwm4_tbclk: ehrpwm4_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <5>; + reg = <0x0664>; + }; + + ehrpwm5_tbclk: ehrpwm5_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <6>; + reg = <0x0664>; + }; }; &prcm_clocks { clk_32768_ck: clk_32768_ck { @@ -229,6 +293,7 @@ reg = <0x2e30>; ti,index-starts-at-one; ti,invert-autoidle-bit; + ti,set-rate-parent; }; dpll_per_ck: dpll_per_ck { @@ -511,6 +576,7 @@ compatible = "ti,mux-clock"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x4244>; + ti,set-rate-parent; }; dpll_extdev_ck: dpll_extdev_ck { @@ -609,10 +675,13 @@ dpll_per_clkdcoldo: dpll_per_clkdcoldo { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,fixed-factor-clock"; clocks = <&dpll_per_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + reg = <0x2e14>; + ti,invert-autoidle-bit; }; dll_aging_clk_div: dll_aging_clk_div { @@ -653,4 +722,36 @@ clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4260>; }; + + usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&usbphy_32khz_clkmux>; + ti,bit-shift = <8>; + reg = <0x2a40>; + }; + + usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&usbphy_32khz_clkmux>; + ti,bit-shift = <8>; + reg = <0x2a48>; + }; + + usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x8a60>; + }; + + usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x8a68>; + }; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 3383c4b66803..416f4e5a69c1 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -35,7 +35,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; sata@a0000 { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 2354fe023ee0..097df7d8f0f6 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -47,7 +47,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; timer@20300 { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 651aeb5ef439..d6d572e5af32 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -50,7 +50,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 4e27587667bf..c5fe8b5dcdc7 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -50,7 +50,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 3e2c857d6000..4169f4096ea3 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -51,7 +51,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; sata@a0000 { diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index bb77970c0b12..23227e0027ec 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -157,6 +157,7 @@ reg-shift = <2>; interrupts = <41>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; serial@12100 { @@ -165,6 +166,7 @@ reg-shift = <2>; interrupts = <42>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -203,6 +205,11 @@ reg = <0x20300 0x34>, <0x20704 0x4>; }; + pmsu@22000 { + compatible = "marvell,armada-370-pmsu"; + reg = <0x22000 0x1000>; + }; + usb@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x500>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index af1f11e9e5a0..21b588b6f6bd 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -220,6 +220,11 @@ clocks = <&coreclk 2>; }; + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x8>; + }; + audio_controller: audio-controller@30000 { compatible = "marvell,armada370-audio"; reg = <0x30000 0x4000>; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0451124e8ebf..772fec2d26ce 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -68,7 +68,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -107,6 +106,14 @@ }; }; + usb@54000 { + status = "okay"; + }; + + usb3@58000 { + status = "okay"; + }; + mvsdio@d4000 { pinctrl-0 = <&sdio_pins &sdio_st_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 3877693fb2d8..fb92551a1e71 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -39,6 +39,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-375-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; @@ -128,6 +130,11 @@ cache-level = <2>; }; + scu@c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc000 0x58>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -194,6 +201,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -203,6 +211,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -320,6 +329,46 @@ clocks = <&coreclk 0>; }; + watchdog@20300 { + compatible = "marvell,armada-375-wdt"; + reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>; + clocks = <&coreclk 0>; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x10>; + }; + + coherency-fabric@21010 { + compatible = "marvell,armada-375-coherency-fabric"; + reg = <0x21010 0x1c>; + }; + + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x500>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 18>; + status = "disabled"; + }; + + usb@54000 { + compatible = "marvell,orion-ehci"; + reg = <0x54000 0x500>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + usb3@58000 { + compatible = "marvell,armada-375-xhci"; + reg = <0x58000 0x20000>,<0x5b880 0x80>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 16>; + status = "disabled"; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -391,6 +440,12 @@ status = "disabled"; }; + thermal@e8078 { + compatible = "marvell,armada375-thermal"; + reg = <0xe8078 0x4>, <0xe807c 0x8>; + status = "okay"; + }; + coreclk: mvebu-sar@e8204 { compatible = "marvell,armada-375-core-clock"; reg = <0xe8204 0x04>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 068031f0f263..e69bc6759c39 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -21,6 +21,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-380-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; @@ -99,7 +101,7 @@ pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index 6828d77696a6..ff9637dd8d0f 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -55,7 +55,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -65,6 +64,10 @@ phy-mode = "rgmii-id"; }; + usb@50000 { + status = "ok"; + }; + ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -81,6 +84,14 @@ }; }; + sata@a8000 { + status = "okay"; + }; + + sata@e0000 { + status = "okay"; + }; + flash@d0000 { status = "okay"; num-cs = <1>; @@ -101,6 +112,22 @@ reg = <0x1000000 0x3f000000>; }; }; + + sdhci@d8000 { + clock-frequency = <200000000>; + broken-cd; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts index 45250c88814b..40893255a3f0 100644 --- a/arch/arm/boot/dts/armada-385-rd.dts +++ b/arch/arm/boot/dts/armada-385-rd.dts @@ -51,7 +51,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -77,6 +76,10 @@ reg = <1>; }; }; + + usb3@f0000 { + status = "okay"; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index e2919f02e1d4..f011009bf4cf 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -21,6 +21,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-380-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; @@ -110,7 +112,7 @@ pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -131,7 +133,7 @@ pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index ca8813bb99ba..3de364e81b52 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -108,6 +108,11 @@ cache-level = <2>; }; + scu@c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc000 0x58>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -174,6 +179,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -183,6 +189,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -267,6 +274,28 @@ clock-names = "nbclk", "fixed"; }; + watchdog@20300 { + compatible = "marvell,armada-380-wdt"; + reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x10>; + }; + + coherency-fabric@21010 { + compatible = "marvell,armada-380-coherency-fabric"; + reg = <0x21010 0x1c>; + }; + + pmsu@22000 { + compatible = "marvell,armada-380-pmsu"; + reg = <0x22000 0x1000>; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -283,6 +312,14 @@ status = "disabled"; }; + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x58000 0x500>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 18>; + status = "disabled"; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -339,6 +376,22 @@ clocks = <&gateclk 4>; }; + sata@a8000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xa8000 0x2000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 15>; + status = "disabled"; + }; + + sata@e0000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 30>; + status = "disabled"; + }; + coredivclk: clock@e4250 { compatible = "marvell,armada-380-corediv-clock"; reg = <0xe4250 0xc>; @@ -347,6 +400,12 @@ clock-output-names = "nand"; }; + thermal@e8078 { + compatible = "marvell,armada380-thermal"; + reg = <0xe4078 0x4>, <0xe4074 0x4>; + status = "okay"; + }; + flash@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; @@ -356,6 +415,31 @@ clocks = <&coredivclk 0>; status = "disabled"; }; + + sdhci@d8000 { + compatible = "marvell,armada-380-sdhci"; + reg = <0xd8000 0x1000>, <0xdc000 0x100>; + interrupts = <0 25 0x4>; + clocks = <&gateclk 17>; + mrvl,clk-delay-cycles = <0x1F>; + status = "disabled"; + }; + + usb3@f0000 { + compatible = "marvell,armada-380-xhci"; + reg = <0xf0000 0x4000>,<0xf4000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + usb3@f8000 { + compatible = "marvell,armada-380-xhci"; + reg = <0xf8000 0x4000>,<0xfc000 0x4000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 10>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index d83d7d69ac01..a55a97a70505 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -95,12 +95,10 @@ }; serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 90f0bf6f9271..42ddb2864365 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -106,19 +106,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 0c756421ae6a..0478c55ca656 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -104,19 +104,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index c2242745b9b8..7e291e2ef4b3 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -37,19 +37,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; @@ -61,6 +57,10 @@ ethernet@30000 { status = "okay"; phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 98335fb34b7a..1257ff1ed278 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -27,6 +27,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 9480cf891f8c..3396b25b39e1 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -29,6 +29,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 31ba6d8fbadf..6da84bf40aaf 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -30,6 +30,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index ff049ee862eb..0cf999abc4ed 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -138,7 +138,6 @@ }; serial@12000 { - clocks = <&coreclk 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 5d42feb31049..e5c6a0492ca0 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -72,11 +72,9 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; pinctrl { diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index abb9f9dcc525..5902e8359c91 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -58,6 +58,7 @@ reg-shift = <2>; interrupts = <43>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; serial@12300 { @@ -66,6 +67,7 @@ reg-shift = <2>; interrupts = <44>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -117,9 +119,9 @@ clock-names = "nbclk", "fixed"; }; - armada-370-xp-pmsu@22000 { - compatible = "marvell,armada-370-xp-pmsu"; - reg = <0x22100 0x400>, <0x20800 0x20>; + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x20>; }; eth2: ethernet@30000 { diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index a542d5837a17..27ebb0f722fd 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -32,11 +32,6 @@ status = "okay"; }; - - tsadcc: tsadcc@f804c000 { - status = "okay"; - }; - rtc@fffffeb0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 4537259ce529..5b8e40400bec 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { mmc0: mmc@f0000000 { @@ -43,11 +51,54 @@ }; i2c0: i2c@f0014000 { + pinctrl-0 = <&pinctrl_i2c0_pu>; status = "okay"; }; i2c1: i2c@f0018000 { status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; macb0: ethernet@f0028000 { @@ -55,6 +106,12 @@ status = "okay"; }; + pwm0: pwm@f002c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>; + status = "okay"; + }; + usart0: serial@f001c000 { status = "okay"; }; @@ -102,6 +159,7 @@ i2c2: i2c@f801c000 { dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + pinctrl-0 = <&pinctrl_i2c2_pu>; status = "okay"; }; @@ -116,6 +174,18 @@ pinctrl@fffff200 { board { + pinctrl_i2c0_pu: i2c0_pu { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_i2c2_pu: i2c2_pu { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 366fc2cbcd64..c0e0eae16a27 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -641,7 +641,7 @@ trigger@3 { reg = <3>; trigger-name = "external"; - trigger-value = <0x13>; + trigger-value = <0xd>; trigger-external; }; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 3be973e9889a..b309c1c6e848 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -29,6 +29,7 @@ i2c0 = &i2c0; ssc0 = &ssc0; ssc1 = &ssc1; + ssc2 = &ssc2; }; cpus { @@ -45,6 +46,18 @@ reg = <0x20000000 0x08000000>; }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -182,6 +195,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -191,6 +206,19 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + ssc2: ssc@fffc4000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc4000 0x4000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; + clocks = <&ssc2_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -385,6 +413,22 @@ }; }; + ssc2 { + pinctrl_ssc2_tx: ssc2_tx-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc2_rx: ssc2_rx-0 { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + spi0 { pinctrl_spi0: spi0-0 { atmel,pins = @@ -524,17 +568,24 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { + slow_rc_osc: slow_rc_osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9260-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_xtal>; }; main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { @@ -545,7 +596,8 @@ reg = <0>; atmel,clk-input-range = <1000000 32000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; }; pllb: pllbck { @@ -554,9 +606,9 @@ interrupts-extended = <&pmc AT91_PMC_LOCKB>; clocks = <&main>; reg = <1>; - atmel,clk-input-range = <1000000 32000000>; + atmel,clk-input-range = <1000000 5000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; }; mck: masterck { @@ -565,16 +617,48 @@ interrupts-extended = <&pmc AT91_PMC_MCKRDY>; clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; }; usb: usbck { compatible = "atmel,at91rm9200-clk-usb"; #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; clocks = <&pllb>; }; + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + + prog3: prog3 { + #clock-cells = <0>; + reg = <3>; + interrupts = <AT91_PMC_PCKRDY(3)>; + }; + }; + systemck { compatible = "atmel,at91rm9200-clk-system"; #address-cells = <1>; @@ -592,6 +676,30 @@ clocks = <&usb>; }; + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + + pck3: pck3 { + #clock-cells = <0>; + reg = <11>; + clocks = <&prog3>; + }; + hclk0: hclk0 { #clock-cells = <0>; reg = <16>; @@ -666,6 +774,21 @@ reg = <13>; }; + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc2_clk: ssc2_clk { + #clock-cells = <0>; + reg = <16>; + }; + tc0_clk: tc0_clk { #clock-cells = <0>; reg = <17>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2ce527e70c7a..c6683ea8b743 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + main_xtal { + clock-frequency = <18432000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 9cdaecff13b3..ace6bf197b70 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -136,6 +136,36 @@ >; /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad5: adc0_ad5 { + atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad6: adc0_ad6 { + atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad7: adc0_ad7 { + atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = @@ -634,10 +664,9 @@ adc0: adc@fffb0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9260-adc"; + compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; - atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 7ff665a8c708..9f5b0a674995 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "at91sam9g45.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "Atmel AT91SAM9M10G45-EK"; @@ -130,6 +131,21 @@ status = "okay"; }; + adc0: adc@fffb0000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7>; + atmel,adc-ts-wires = <4>; + status = "okay"; + }; + pwm0: pwm@fffb8000 { status = "okay"; @@ -216,14 +232,14 @@ d6 { label = "d6"; - pwms = <&pwm0 3 5000 0>; + pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - pwms = <&pwm0 1 5000 0>; + pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "mmc0"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 9f04808fc697..d1b82e6635d5 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9N12 SoC"; @@ -49,6 +50,18 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -75,8 +88,280 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; - reg = <0xfffffc00 0x100>; + compatible = "atmel,at91sam9n12-pmc"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc>, <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, + <695000000 750000000 1 0>, + <645000000 700000000 2 0>, + <595000000 650000000 3 0>, + <545000000 600000000 0 1>, + <495000000 555000000 1 1>, + <445000000 500000000 1 2>, + <400000000 450000000 1 3>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <30000000 100000000 0>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + atmel,master-clk-have-div3-pres; + }; + + usb: usbck { + compatible = "atmel,at91sam9n12-clk-usb"; + #clock-cells = <0>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + lcdck: lcdck { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioAB_clk: pioAB_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioCD_clk: pioCD_clk { + #clock-cells = <0>; + reg = <3>; + }; + + fuse_clk: fuse_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <8>; + }; + + twi0_clk: twi0_clk { + reg = <9>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <10>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <14>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <15>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tcb_clk: tcb_clk { + #clock-cells = <0>; + reg = <17>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <18>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <19>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <20>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <23>; + }; + + lcdc_clk: lcdc_clk { + #clock-cells = <0>; + reg = <25>; + }; + + sha_clk: sha_clk { + #clock-cells = <0>; + reg = <27>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <28>; + }; + + aes_clk: aes_clk { + #clock-cells = <0>; + reg = <29>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; }; rstc@fffffe00 { @@ -88,6 +373,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; shdwc@fffffe10 { @@ -95,12 +381,38 @@ reg = <0xfffffe10 0x10>; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_osc>; + }; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -110,12 +422,16 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb_clk>; + clock-names = "t0_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb_clk>; + clock-names = "t0_clk"; }; dma: dma-controller@ffffec00 { @@ -123,6 +439,8 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff400 { @@ -392,6 +710,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioB: gpio@fffff600 { @@ -402,6 +721,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioC: gpio@fffff800 { @@ -412,6 +732,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; pioD: gpio@fffffa00 { @@ -422,6 +743,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; }; @@ -431,6 +753,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -443,6 +767,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -452,6 +778,8 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -461,6 +789,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -470,6 +800,8 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -479,6 +811,8 @@ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -493,6 +827,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -507,6 +842,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -521,6 +857,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -535,6 +873,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -554,6 +894,7 @@ reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; + clocks = <&pwm_clk>; status = "disabled"; }; }; @@ -584,6 +925,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 924a6a6ffd0f..64bbe46e4f90 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <16000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 92a52faebef7..1da183155eee 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Atmel AT91SAM9RL family SoC"; @@ -32,6 +33,7 @@ i2c1 = &i2c1; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { @@ -48,12 +50,43 @@ reg = <0x20000000 0x04000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + clocks { + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + fb0: fb@00500000 { + compatible = "atmel,at91sam9rl-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "hclk", "lcdc_clk"; + status = "disabled"; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; @@ -187,6 +220,16 @@ status = "disabled"; }; + pwm0: pwm@fffc8000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xfffc8000 0x300>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + clock-names = "pwm_clk"; + status = "disabled"; + }; + spi0: spi@fffcc000 { #address-cells = <1>; #size-cells = <0>; @@ -200,6 +243,111 @@ status = "disabled"; }; + adc0: adc@fffd0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-adc"; + reg = <0xfffd0000 0x100>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-use-external-triggers; + atmel,adc-channels-used = <0x3f>; + atmel,adc-vref = <3300>; + atmel,adc-startup-time = <40>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; + + trigger@0 { + reg = <0>; + trigger-name = "timer-counter-0"; + trigger-value = <0x1>; + }; + trigger@1 { + reg = <1>; + trigger-name = "timer-counter-1"; + trigger-value = <0x3>; + }; + + trigger@2 { + reg = <2>; + trigger-name = "timer-counter-2"; + trigger-value = <0x5>; + }; + + trigger@3 { + reg = <3>; + trigger-name = "external"; + trigger-value = <0x13>; + trigger-external; + }; + }; + + usb0: gadget@fffd4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00600000 0x100000>, + <0xfffd4000 0x4000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + ramc0: ramc@ffffea00 { compatible = "atmel,at91sam9260-sdramc"; reg = <0xffffea00 0x200>; @@ -238,6 +386,44 @@ <0x003fffff 0x0001ff3c>; /* pioD */ /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_ts: adc0_ts-0 { + atmel,pins = + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad0: adc0_ad0-0 { + atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad1: adc0_ad1-0 { + atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad2: adc0_ad2-0 { + atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad3: adc0_ad3-0 { + atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad4: adc0_ad4-0 { + atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad5: adc0_ad5-0 { + atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_adtrg: adc0_adtrg-0 { + atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = @@ -246,6 +432,33 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = @@ -307,6 +520,61 @@ }; }; + pwm0 { + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { + atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { + atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { + atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { + atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { + atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 { + atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { + atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { + atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = @@ -339,15 +607,6 @@ }; }; - spi0 { - pinctrl_spi0: spi0-0 { - atmel,pins = - <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; - }; - }; - tcb0 { pinctrl_tcb0_tclk0: tcb0_tclk0-0 { atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; @@ -548,17 +807,11 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { @@ -568,8 +821,9 @@ clocks = <&main>; reg = <0>; atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <80000000 200000000 0>, + <190000000 240000000 2>; }; utmi: utmick { @@ -586,7 +840,7 @@ interrupts-extended = <&pmc AT91_PMC_MCKRDY>; clocks = <&clk32k>, <&main>, <&plla>, <&utmi>; atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; }; prog: progck { @@ -769,6 +1023,32 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index cddb37825fad..d4a010e40fe3 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -20,6 +20,15 @@ reg = <0x20000000 0x4000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -32,6 +41,37 @@ }; ahb { + fb0: fb@00500000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; @@ -92,6 +132,43 @@ status = "okay"; }; + adc0: adc@fffd0000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_adtrg>; + atmel,adc-ts-wires = <4>; + status = "okay"; + }; + + usb0: gadget@fffd4000 { + atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + spi0: spi@fffcc000 { + status = "okay"; + cs-gpios = <&pioA 28 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <15000000>; + reg = <0>; + }; + }; + + pwm0: pwm@fffc8000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm1_2>, + <&pinctrl_pwm0_pwm2_2>; + }; + dbgu: serial@fffff200 { status = "okay"; }; @@ -117,18 +194,24 @@ }; }; - leds { - compatible = "gpio-leds"; + pwmleds { + compatible = "pwm-leds"; ds1 { label = "ds1"; - gpios = <&pioD 15 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; }; ds2 { label = "ds2"; - gpios = <&pioD 16 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; }; + }; + + leds { + compatible = "gpio-leds"; ds3 { label = "ds3"; @@ -154,4 +237,12 @@ gpio-key,wakeup; }; }; + + i2c@0 { + status = "okay"; + }; + + i2c@1 { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index fc13c9240da8..1a57298636a5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9x5 family SoC"; @@ -51,6 +52,24 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -77,8 +96,272 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91sam9x5-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc>, <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0 + 695000000 750000000 1 0 + 645000000 700000000 2 0 + 595000000 650000000 3 0 + 545000000 600000000 0 1 + 495000000 555000000 1 1 + 445000000 500000000 1 2 + 400000000 450000000 1 3>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + atmel,master-clk-have-div3-pres; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + smdck: smdck { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioAB_clk: pioAB_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioCD_clk: pioCD_clk { + #clock-cells = <0>; + reg = <3>; + }; + + smd_clk: smd_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <7>; + }; + + twi0_clk: twi0_clk { + reg = <9>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi2_clk: twi2_clk { + #clock-cells = <0>; + reg = <11>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <14>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <15>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <18>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <19>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma1_clk: dma1_clk { + #clock-cells = <0>; + reg = <21>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <23>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <26>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <28>; + }; + }; }; rstc@fffffe00 { @@ -95,18 +378,47 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_osc>; + }; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; dma0: dma-controller@ffffec00 { @@ -114,6 +426,8 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; dma1: dma-controller@ffffee00 { @@ -121,6 +435,8 @@ reg = <0xffffee00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff400 { @@ -453,6 +769,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioB: gpio@fffff600 { @@ -464,6 +781,7 @@ #gpio-lines = <19>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioC: gpio@fffff800 { @@ -474,6 +792,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; pioD: gpio@fffffa00 { @@ -485,6 +804,7 @@ #gpio-lines = <22>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; }; @@ -497,6 +817,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -507,6 +829,8 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -519,6 +843,8 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -530,6 +856,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -539,6 +867,8 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -548,6 +878,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -557,6 +889,8 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -571,6 +905,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -585,6 +920,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -599,6 +935,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&twi2_clk>; status = "disabled"; }; @@ -608,6 +945,8 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -617,6 +956,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -626,6 +967,9 @@ compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -673,6 +1017,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -687,6 +1033,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -805,6 +1153,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -812,6 +1163,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi new file mode 100644 index 000000000000..f44ab7702a12 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -0,0 +1,31 @@ +/* + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * Ethernet interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + can0_clk: can0_clk { + #clock-cells = <0>; + reg = <29>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi new file mode 100644 index 000000000000..98bc877a68ef --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi @@ -0,0 +1,26 @@ +/* + * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an + * Image Sensor Interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <25>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi new file mode 100644 index 000000000000..485302e8233d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -0,0 +1,26 @@ +/* + * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an + * LCD controller. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + lcdc_clk: lcdc_clk { + #clock-cells = <0>; + reg = <25>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 55731ffba764..57e89d1d0325 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -43,12 +43,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <24>; + }; + }; + }; + macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index 77425a627a94..663676c02861 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -31,12 +31,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + macb1_clk: macb1_clk { + #clock-cells = <0>; + reg = <27>; + }; + }; + }; + macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 6801106fa1f8..140217a54384 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -42,12 +42,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <8>; + }; + }; + }; + usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 4a5ee5cc115a..8413e21192eb 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -23,6 +23,14 @@ }; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { pinctrl@fffff400 { diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 9d72674049d6..bb22842a0826 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -39,6 +39,11 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <29>; + }; + axi { compatible = "simple-bus"; #address-cells = <1>; @@ -167,6 +172,7 @@ compatible = "sirf,prima2-dspif"; reg = <0xa8000000 0x10000>; interrupts = <9>; + resets = <&rstc 1>; }; gps@a8010000 { @@ -174,6 +180,7 @@ reg = <0xa8010000 0x10000>; interrupts = <7>; clocks = <&clks 9>; + resets = <&rstc 2>; }; dsp@a9000000 { @@ -181,6 +188,7 @@ reg = <0xa9000000 0x1000000>; interrupts = <8>; clocks = <&clks 8>; + resets = <&rstc 0>; }; }; @@ -195,6 +203,7 @@ compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + clocks = <&clks 11>; }; nand@b0030000 { @@ -297,9 +306,9 @@ reg = <0xb00d0000 0x10000>; interrupts = <15>; sirf,spi-num-chipselects = <1>; - cs-gpios = <&gpio 0 0>; - sirf,spi-dma-rx-channel = <25>; - sirf,spi-dma-tx-channel = <20>; + dmas = <&dmac1 9>, + <&dmac1 4>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 19>; @@ -312,8 +321,9 @@ reg = <0xb0170000 0x10000>; interrupts = <16>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <12>; - sirf,spi-dma-tx-channel = <13>; + dmas = <&dmac0 12>, + <&dmac0 13>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 20>; @@ -554,6 +564,18 @@ sirf,function = "usp0_uart_nostreamctrl"; }; }; + usp0_only_utfs_pins_a: usp0@2 { + usp0 { + sirf,pins = "usp0_only_utfs_grp"; + sirf,function = "usp0_only_utfs"; + }; + }; + usp0_only_urfs_pins_a: usp0@3 { + usp0 { + sirf,pins = "usp0_only_urfs_grp"; + sirf,function = "usp0_only_urfs"; + }; + }; usp1_pins_a: usp1@0 { usp1 { sirf,pins = "usp1grp"; diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts new file mode 100644 index 000000000000..a9d60471d9ff --- /dev/null +++ b/arch/arm/boot/dts/axm5516-amarillo.dts @@ -0,0 +1,51 @@ +/* + * arch/arm/boot/dts/axm5516-amarillo.dts + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; + +/memreserve/ 0x00000000 0x00400000; + +#include "axm55xx.dtsi" +#include "axm5516-cpus.dtsi" + +/ { + model = "Amarillo AXM5516"; + compatible = "lsi,axm5516-amarillo", "lsi,axm5516"; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0x02 0x00000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi new file mode 100644 index 000000000000..b85f360cb125 --- /dev/null +++ b/arch/arm/boot/dts/axm5516-cpus.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm5516-cpus.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + cluster2 { + core0 { + cpu = <&CPU8>; + }; + core1 { + cpu = <&CPU9>; + }; + core2 { + cpu = <&CPU10>; + }; + core3 { + cpu = <&CPU11>; + }; + }; + cluster3 { + core0 { + cpu = <&CPU12>; + }; + core1 { + cpu = <&CPU13>; + }; + core2 { + cpu = <&CPU14>; + }; + core3 { + cpu = <&CPU15>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x00>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x01>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x02>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x03>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x102>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x103>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x200>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x201>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x202>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x203>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x300>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x301>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x302>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x303>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + }; +}; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi new file mode 100644 index 000000000000..ea288f0a1d39 --- /dev/null +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm55xx.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/lsi,axm5516-clks.h> + +#include "skeleton64.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + timer = &timer0; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clk_ref0: clk_ref0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref1: clk_ref1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref2: clk_ref2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clks: clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0 0x20000>; + }; + }; + + gic: interrupt-controller@2001001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x20 0x01001000 0 0x1000>, + <0x20 0x01002000 0 0x1000>, + <0x20 0x01004000 0 0x2000>, + <0x20 0x01006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + device_type = "soc"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + ranges; + + syscon: syscon@2010030000 { + compatible = "lsi,axxia-syscon", "syscon"; + reg = <0x20 0x10030000 0 0x2000>; + }; + + reset: reset@2010031000 { + compatible = "lsi,axm55xx-reset"; + syscon = <&syscon>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial0: uart@2010080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10080000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial1: uart@2010081000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10081000 0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial2: uart@2010082000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10082000 0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial3: uart@2010083000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10083000 0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + timer0: timer@2010091000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x20 0x10091000 0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "okay"; + }; + + gpio0: gpio@2010092000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10092000 0x00 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio1: gpio@2010093000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10093000 0x00 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + }; +}; + +/* + Local Variables: + mode: C + End: +*/ diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 64d069bcc409..6b05ae6d476f 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -193,6 +193,14 @@ status = "disabled"; }; + pwm: pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xcc>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 08a44d41b672..8b366822bb43 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include "dt-bindings/clock/bcm21664.h" + #include "skeleton.dtsi" / { @@ -43,7 +45,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x118>; - clocks = <&uartb_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -53,7 +55,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e001000 0x118>; - clocks = <&uartb2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -63,7 +65,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e002000 0x118>; - clocks = <&uartb3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -85,7 +87,7 @@ compatible = "brcm,kona-timer"; reg = <0x35006000 0x1c>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&hub_timer_clk>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; }; gpio: gpio@35003000 { @@ -106,7 +108,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x801c>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio1_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; status = "disabled"; }; @@ -114,7 +116,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x801c>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio2_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; status = "disabled"; }; @@ -122,7 +124,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x801c>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio3_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; status = "disabled"; }; @@ -130,7 +132,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x801c>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio4_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; status = "disabled"; }; @@ -140,7 +142,7 @@ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc1_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; status = "disabled"; }; @@ -150,7 +152,7 @@ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; status = "disabled"; }; @@ -160,7 +162,7 @@ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; status = "disabled"; }; @@ -170,105 +172,149 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc4_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; status = "disabled"; }; clocks { - bsc1_clk: bsc1 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; - #clock-cells = <0>; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges; - bsc2_clk: bsc2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc3_clk: bsc3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + bbl_32k_clk: bbl_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc4_clk: bsc4 { + ref_13m_clk: ref_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - pmu_bsc_clk: pmu_bsc { + var_13m_clk: var_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - hub_timer_clk: hub_timer { - compatible = "fixed-clock"; - clock-frequency = <32768>; + dft_19_5m_clk: dft_19_5m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; }; - pwm_clk: pwm { + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <26000000>; - #clock-cells = <0>; }; - sdio1_clk: sdio1 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_52m_clk: ref_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio2_clk: sdio2 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + var_52m_clk: var_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio3_clk: sdio3 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + usb_otg_ahb_clk: usb_otg_ahb { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio4_clk: sdio4 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_96m_clk: ref_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - tmon_1m_clk: tmon_1m { - compatible = "fixed-clock"; - clock-frequency = <1000000>; + var_96m_clk: var_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - uartb_clk: uartb { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_104m_clk: ref_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb2_clk: uartb2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + var_104m_clk: var_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb3_clk: uartb3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_156m_clk: ref_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; }; - usb_otg_ahb_clk: usb_otg_ahb { - compatible = "fixed-clock"; - clock-frequency = <52000000>; + var_156m_clk: var_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu { + compatible = BCM21664_DT_ROOT_CCU_COMPAT; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu { + compatible = BCM21664_DT_AON_CCU_COMPAT; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + master_ccu: master_ccu { + compatible = BCM21664_DT_MASTER_CCU_COMPAT; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + + slave_ccu: slave_ccu { + compatible = BCM21664_DT_SLAVE_CCU_COMPAT; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; }; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index af3da55eef49..9ce91dd60cb6 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -69,6 +69,10 @@ status = "okay"; }; + pwm: pwm@3e01a000 { + status = "okay"; + }; + usbotg: usb@3f120000 { vusb_d-supply = <&usbldo_reg>; vusb_a-supply = <&iosr1_reg>; diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi index dfadaaa89b05..066adfb10bd5 100644 --- a/arch/arm/boot/dts/bcm59056.dtsi +++ b/arch/arm/boot/dts/bcm59056.dtsi @@ -70,5 +70,26 @@ vsr_reg: vsr { }; + + gpldo1_reg: gpldo1 { + }; + + gpldo2_reg: gpldo2 { + }; + + gpldo3_reg: gpldo3 { + }; + + gpldo4_reg: gpldo4 { + }; + + gpldo5_reg: gpldo5 { + }; + + gpldo6_reg: gpldo6 { + }; + + vbus_reg: vbus { + }; }; }; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 56a1af2f1052..2477dac4d643 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/clock/berlin2.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -37,24 +38,10 @@ }; }; - clocks { - smclk: sysmgr-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - cfgclk: cfg-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - sysclk: system-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <400000000>; - }; + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; soc { @@ -72,6 +59,11 @@ cache-level = <2>; }; + scu: snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x58>; + }; + gic: interrupt-controller@ad1000 { compatible = "arm,cortex-a9-gic"; reg = <0xad1000 0x1000>, <0xad0100 0x0100>; @@ -83,7 +75,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; + clocks = <&chip CLKID_TWD>; }; apb@e80000 { @@ -94,11 +86,83 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -107,7 +171,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -116,7 +180,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -125,7 +189,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -134,7 +198,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -143,7 +207,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -152,7 +216,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -161,7 +225,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -176,6 +240,14 @@ }; }; + chip: chip-control@ea0000 { + compatible = "marvell,berlin2-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -184,13 +256,48 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <11>; + }; + }; + uart0: serial@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; reg-shift = <2>; reg-io-width = <1>; interrupts = <8>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -200,7 +307,9 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <9>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart1_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -210,10 +319,32 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <10>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart2_pmux>; + pinctrl-names = "default"; status = "disabled"; }; + sysctrl: system-controller@d000 { + compatible = "marvell,berlin2-system-ctrl"; + reg = <0xd000 0x100>; + + uart0_pmux: uart0-pmux { + groups = "GSM4"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM5"; + function = "uart1"; + }; + + uart2_pmux: uart2-pmux { + groups = "GSM3"; + function = "uart2"; + }; + }; + sic: interrupt-controller@e000 { compatible = "snps,dw-apb-ictl"; reg = <0xe000 0x400>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 094968c27533..cc1df65da504 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/clock/berlin2.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -30,24 +31,10 @@ }; }; - clocks { - smclk: sysmgr-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - cfgclk: cfg-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - sysclk: system-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <300000000>; - }; + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; soc { @@ -76,7 +63,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; + clocks = <&chip CLKID_TWD>; }; apb@e80000 { @@ -87,11 +74,83 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -100,7 +159,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -109,7 +168,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -118,7 +177,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -127,7 +186,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -136,7 +195,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -145,7 +204,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -154,7 +213,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -169,6 +228,19 @@ }; }; + chip: chip-control@ea0000 { + compatible = "marvell,berlin2cd-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>; + clock-names = "refclk"; + + uart0_pmux: uart0-pmux { + groups = "G6"; + function = "uart0"; + }; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -177,13 +249,45 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + uart0: serial@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; reg-shift = <2>; reg-io-width = <1>; interrupts = <8>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -193,10 +297,15 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <9>; - clocks = <&smclk>; + clocks = <&refclk>; status = "disabled"; }; + sysctrl: system-controller@d000 { + compatible = "marvell,berlin2cd-system-ctrl"; + reg = <0xd000 0x100>; + }; + sic: interrupt-controller@e000 { compatible = "snps,dw-apb-ictl"; reg = <0xe000 0x400>; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts new file mode 100644 index 000000000000..995150f93795 --- /dev/null +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "berlin2q.dtsi" + +/ { + model = "Marvell BG2-Q DMP"; + compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; + + choosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; +}; + +&sdhci1 { + broken-cd; + sdhci,wp-inverted; + status = "okay"; +}; + +&sdhci2 { + non-removable; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi new file mode 100644 index 000000000000..635a16a64cb4 --- /dev/null +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <dt-bindings/clock/berlin2q.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" + +/ { + model = "Marvell Armada 1500 pro (BG2-Q) SoC"; + compatible = "marvell,berlin2q", "marvell,berlin"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <3>; + }; + }; + + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xf7000000 0x1000000>; + interrupt-parent = <&gic>; + + sdhci0: sdhci@ab0000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0000 0x200>; + clocks = <&chip CLKID_SDIO1XIN>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci1: sdhci@ab0800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0800 0x200>; + clocks = <&chip CLKID_SDIO1XIN>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci2: sdhci@ab1000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab1000 0x200>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_SDIO1XIN>; + status = "disabled"; + }; + + l2: l2-cache-controller@ac0000 { + compatible = "arm,pl310-cache"; + reg = <0xac0000 0x1000>; + cache-level = <2>; + }; + + scu: snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x58>; + }; + + local-timer@ad0600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xad0600 0x20>; + clocks = <&chip CLKID_TWD>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: interrupt-controller@ad1000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xad1000 0x1000>, <0xad0100 0x100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe80000 0x10000>; + interrupt-parent = <&aic>; + + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + + timer0: timer@2c00 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c00 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + interrupts = <8>; + }; + + timer1: timer@2c14 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c14 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer2: timer@2c28 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c28 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer3: timer@2c3c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c3c 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer4: timer@2c50 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c50 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer5: timer@2c64 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c64 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer6: timer@2c78 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c78 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer7: timer@2c8c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c8c 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + aic: interrupt-controller@3800 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio4: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + + gpio5: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + }; + + chip: chip-control@ea0000 { + compatible = "marvell,berlin2q-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>, <0xdd0170 0x10>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + + apb@fc0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xfc0000 0x10000>; + interrupt-parent = <&sic>; + + uart0: uart@9000 { + compatible = "snps,dw-apb-uart"; + reg = <0x9000 0x100>; + interrupt-parent = <&sic>; + interrupts = <8>; + clocks = <&refclk>; + reg-shift = <2>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart1: uart@a000 { + compatible = "snps,dw-apb-uart"; + reg = <0xa000 0x100>; + interrupt-parent = <&sic>; + interrupts = <9>; + clocks = <&refclk>; + reg-shift = <2>; + pinctrl-0 = <&uart1_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sysctrl: pin-controller@d000 { + compatible = "marvell,berlin2q-system-ctrl"; + reg = <0xd000 0x100>; + + uart0_pmux: uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM14"; + function = "uart1"; + }; + }; + + sic: interrupt-controller@e000 { + compatible = "snps,dw-apb-ictl"; + reg = <0xe000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 5babba0a3a75..4adc28039c30 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "dra7.dtsi" +#include "dra74x.dtsi" / { - model = "TI DRA7"; - compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7"; + model = "TI DRA742"; + compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"; memory { device_type = "memory"; @@ -93,6 +93,64 @@ 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; + + qspi1_pins: pinmux_qspi1_pins { + pinctrl-single,pins = < + 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ + 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ + 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ + 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ + 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ + 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + + usb2_pins: pinmux_usb2_pins { + pinctrl-single,pins = < + 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + >; + }; + + nand_flash_x16: nand_flash_x16 { + /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch + * So NAND flash requires following switch settings: + * SW5.9 (GPMC_WPN) = LOW + * SW5.1 (NAND_BOOTn) = HIGH */ + pinctrl-single,pins = < + 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ + >; + }; }; &i2c1 { @@ -273,3 +331,167 @@ &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00010000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x00150000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x00160000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x00170000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x00970000 0x01690000>; + }; + }; +}; + +&usb1 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&usb2 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_flash_x16>; + ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + reg = <0 0 4>; /* device IO registers */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <40>; + gpmc,cs-wr-off-ns = <40>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; + gpmc,we-on-ns = <5>; + gpmc,we-off-ns = <25>; + gpmc,oe-on-ns = <2>; + gpmc,oe-off-ns = <20>; + gpmc,access-ns = <20>; + gpmc,wr-access-ns = <40>; + gpmc,rd-cycle-ns = <40>; + gpmc,wr-cycle-ns = <40>; + gpmc,wait-pin = <0>; + gpmc,wait-on-read; + gpmc,wait-on-write; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x000020000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00020000 0x00020000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00040000 0x00020000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x00060000 0x00020000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00080000 0x00040000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x000c0000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x001c0000 0x00020000>; + }; + partition@7 { + label = "NAND.u-boot-env"; + reg = <0x001e0000 0x00020000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00200000 0x00800000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x0f600000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 149b55099935..c29945e07c5a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -33,33 +33,6 @@ serial5 = &uart6; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <1>; - }; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -99,13 +72,13 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x44000000 0x2000>, - <0x44800000 0x3000>; + reg = <0x44000000 0x1000000>, + <0x45000000 0x1000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -789,6 +762,228 @@ dma-names = "tx0", "rx0"; status = "disabled"; }; + + qspi: qspi@4b300000 { + compatible = "ti,dra7xxx-qspi"; + reg = <0x4b300000 0x100>; + reg-names = "qspi_base"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "qspi"; + clocks = <&qspi_gfclk_div>; + clock-names = "fck"; + num-cs = <4>; + interrupts = <0 343 0x4>; + status = "disabled"; + }; + + omap_control_sata: control-phy@4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp@4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a090000 0x20>; + ti,hwmods = "ocp2scp3"; + sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + #phy-cells = <0>; + }; + }; + + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; + + omap_control_usb2phy1: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usb3phy1: control-phy@4a002370 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002370 0x4>; + reg-names = "power"; + }; + + omap_control_usb2phy2: control-phy@0x4a002e74 { + compatible = "ti,control-phy-usb2-dra7"; + reg = <0x4a002e74 0x4>; + reg-names = "power"; + }; + + /* OCP2SCP1 */ + ocp2scp@4a080000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a080000 0x20>; + ti,hwmods = "ocp2scp1"; + + usb2_phy1: phy@4a084000 { + compatible = "ti,omap-usb2"; + reg = <0x4a084000 0x400>; + ctrl-module = <&omap_control_usb2phy1>; + clocks = <&usb_phy1_always_on_clk32k>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb2_phy2: phy@4a085000 { + compatible = "ti,omap-usb2"; + reg = <0x4a085000 0x400>; + ctrl-module = <&omap_control_usb2phy2>; + clocks = <&usb_phy2_always_on_clk32k>, + <&usb_otg_ss2_refclk960m>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb3_phy1: phy@4a084400 { + compatible = "ti,omap-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb3phy1>; + clocks = <&usb_phy3_always_on_clk32k>, + <&sys_clkin1>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + + omap_dwc3_1@48880000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x48880000 0x10000>; + interrupts = <0 77 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + usb1: usb@48890000 { + compatible = "snps,dwc3"; + reg = <0x48890000 0x17000>; + interrupts = <0 76 4>; + phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + omap_dwc3_2@488c0000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss2"; + reg = <0x488c0000 0x10000>; + interrupts = <0 92 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + usb2: usb@488d0000 { + compatible = "snps,dwc3"; + reg = <0x488d0000 0x17000>; + interrupts = <0 78 4>; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ + omap_dwc3_3@48900000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss3"; + reg = <0x48900000 0x10000>; + /* interrupts = <0 TBD 4>; */ + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb3: usb@48910000 { + compatible = "snps,dwc3"; + reg = <0x48910000 0x17000>; + /* interrupts = <0 93 4>; */ + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + omap_dwc3_4@48940000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss4"; + reg = <0x48940000 0x10000>; + /* interrupts = <0 TBD 4>; */ + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb4: usb@48950000 { + compatible = "snps,dwc3"; + reg = <0x48950000 0x17000>; + /* interrupts = <0 TBD 4>; */ + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + elm: elm@48078000 { + compatible = "ti,am3352-elm"; + reg = <0x48078000 0xfc0>; /* device IO registers */ + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "elm"; + status = "disabled"; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x37c>; /* device IO registers */ + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts new file mode 100644 index 000000000000..514702348818 --- /dev/null +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" + +/ { + model = "TI DRA722"; + compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1024 MB */ + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi new file mode 100644 index 000000000000..f1ec22f6ebf4 --- /dev/null +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra722", "ti,dra72", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi new file mode 100644 index 000000000000..a4e8bb9f95c0 --- /dev/null +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra742", "ti,dra74", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cfb8fc753f50..c7676871d9c0 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1386,6 +1386,14 @@ ti,dividers = <1>, <8>; }; + l3init_960m_gfclk: l3init_960m_gfclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_usb_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x06c0>; + }; + dss_32khz_clk: dss_32khz_clk { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -1533,7 +1541,7 @@ usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; + clocks = <&l3init_960m_gfclk>; ti,bit-shift = <8>; reg = <0x13f0>; }; @@ -1541,7 +1549,7 @@ usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; + clocks = <&l3init_960m_gfclk>; ti,bit-shift = <8>; reg = <0x1340>; }; diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi new file mode 100644 index 000000000000..47b92c150f4e --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -0,0 +1,475 @@ +/* + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, + <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, + <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpk0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi new file mode 100644 index 000000000000..3e678fa335bf --- /dev/null +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -0,0 +1,444 @@ +/* + * Samsung's Exynos3250 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/exynos3250.h> + +/ { + compatible = "samsung,exynos3250"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + spi0 = &spi_0; + spi1 = &spi_1; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + fixed-rate-clocks { + #address-cells = <1>; + #size-cells = <0>; + + xusbxti: clock@0 { + compatible = "fixed-clock"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; + + xxti: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; + + xtcxo: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@3f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x3f000 0x1000>; + }; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + sys_reg: syscon@10010000 { + compatible = "samsung,exynos3-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; + + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos3250-pmu", "syscon"; + reg = <0x10020000 0x4000>; + }; + + pd_cam: cam-power-domain@10023C00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + }; + + pd_mfc: mfc-power-domain@10023C40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + }; + + pd_g3d: g3d-power-domain@10023C60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10023C80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos3250-cmu"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + rtc: rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 73 0>, <0 74 0>; + status = "disabled"; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, + <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; + clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 225 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 48 0>; + }; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 240 0>; + }; + + mshc_0: mshc@12510000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12510000 0x1000>; + interrupts = <0 142 0>; + clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mshc_1: mshc@12520000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12520000 0x1000>; + interrupts = <0 143 0>; + clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 138 0>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 139 0>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos-adc-v3"; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + clock-names = "adc", "sclk_tsadc"; + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + serial_0: serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 109 0>; + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_1: serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 110 0>; + clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + i2c_0: i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 113 0>; + clocks = <&cmu CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; + + i2c_1: i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 114 0>; + clocks = <&cmu CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; + + i2c_2: i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 115 0>; + clocks = <&cmu CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; + + i2c_3: i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 116 0>; + clocks = <&cmu CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; + + i2c_4: i2c@138A0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 117 0>; + clocks = <&cmu CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; + + i2c_5: i2c@138B0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 118 0>; + clocks = <&cmu CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; + + i2c_6: i2c@138C0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 119 0>; + clocks = <&cmu CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; + + i2c_7: i2c@138D0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 120 0>; + clocks = <&cmu CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; + }; + + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 121 0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + status = "disabled"; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 122 0>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "disabled"; + }; + + pwm: pwm@139D0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 108 0>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <0 18 0>, <0 19 0>; + }; + }; +}; + +#include "exynos3250-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 2f8bcd068d17..b8ece4be41ca 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -20,6 +20,7 @@ */ #include <dt-bindings/clock/exynos4.h> +#include <dt-bindings/clock/exynos-audss-clk.h> #include "skeleton.dtsi" / { @@ -45,6 +46,23 @@ fimc3 = &fimc_3; }; + clock_audss: clock-controller@03810000 { + compatible = "samsung,exynos4210-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + }; + + i2s0: i2s@03830000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x03830000 0x100>; + clocks = <&clock_audss EXYNOS_I2S_BUS>; + clock-names = "iis"; + dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx", "tx-sec"; + samsung,idma-addr = <0x03000000>; + status = "disabled"; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -110,6 +128,11 @@ reg = <0x10010000 0x400>; }; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4210-pmu", "syscon"; + reg = <0x10020000 0x4000>; + }; + dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; @@ -117,7 +140,7 @@ samsung,power-domain = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; - clocks = <&clock 286>, <&clock 143>; + clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; clock-names = "bus_clk", "pll_clk"; status = "disabled"; #address-cells = <1>; @@ -129,12 +152,10 @@ status = "disabled"; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; ranges; - clock_cam: clock-controller { - #clock-cells = <1>; - }; - fimc_0: fimc@11800000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; @@ -273,6 +294,27 @@ status = "disabled"; }; + exynos_usbphy: exynos-usbphy@125B0000 { + compatible = "samsung,exynos4210-usb2-phy"; + reg = <0x125B0000 0x100>; + samsung,pmureg-phandle = <&pmu_system_controller>; + clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + hsotg@12480000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0x12480000 0x20000>; + interrupts = <0 71 0>; + clocks = <&clock CLK_USB_DEVICE>; + clock-names = "otg"; + phys = <&exynos_usbphy 0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + ehci@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; @@ -291,6 +333,26 @@ status = "disabled"; }; + i2s1: i2s@13960000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x13960000 0x100>; + clocks = <&clock CLK_I2S1>; + clock-names = "iis"; + dmas = <&pdma1 12>, <&pdma1 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s2: i2s@13970000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x13970000 0x100>; + clocks = <&clock CLK_I2S2>; + clock-names = "iis"; + dmas = <&pdma0 14>, <&pdma0 13>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + mfc: codec@13400000 { compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; @@ -371,6 +433,8 @@ interrupts = <0 60 0>; clocks = <&clock CLK_I2C2>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; status = "disabled"; }; @@ -382,6 +446,8 @@ interrupts = <0 61 0>; clocks = <&clock CLK_I2C3>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; status = "disabled"; }; @@ -393,6 +459,8 @@ interrupts = <0 62 0>; clocks = <&clock CLK_I2C4>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; status = "disabled"; }; @@ -404,6 +472,8 @@ interrupts = <0 63 0>; clocks = <&clock CLK_I2C5>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; status = "disabled"; }; @@ -415,6 +485,8 @@ interrupts = <0 64 0>; clocks = <&clock CLK_I2C6>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; status = "disabled"; }; @@ -426,6 +498,8 @@ interrupts = <0 65 0>; clocks = <&clock CLK_I2C7>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 72fb11f7ea21..f767c425d0b5 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/input/input.h> / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -48,6 +49,14 @@ }; }; + watchdog@10060000 { + status = "okay"; + }; + + rtc@10070000 { + status = "okay"; + }; + tmu@100C0000 { status = "okay"; }; @@ -251,35 +260,35 @@ up { label = "Up"; gpios = <&gpx2 0 1>; - linux,code = <103>; + linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "Down"; gpios = <&gpx2 1 1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "Back"; gpios = <&gpx1 7 1>; - linux,code = <158>; + linux,code = <KEY_BACK>; gpio-key,wakeup; }; home { label = "Home"; gpios = <&gpx1 6 1>; - linux,code = <102>; + linux,code = <KEY_HOME>; gpio-key,wakeup; }; menu { label = "Menu"; gpios = <&gpx1 5 1>; - linux,code = <139>; + linux,code = <KEY_MENU>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 63aa2bb24a4b..f516da9e8b3a 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -88,6 +88,12 @@ }; }; + hsotg@12480000 { + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; + status = "okay"; + }; + sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; @@ -97,6 +103,10 @@ status = "okay"; }; + exynos-usbphy@125B0000 { + status = "okay"; + }; + serial@13800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 63e34b24b04f..d50eb3aa708e 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -28,6 +28,21 @@ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; }; + sysram@02020000 { + smp-sysram@0 { + status = "disabled"; + }; + + smp-sysram@5000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x5000 0x1000>; + }; + + smp-sysram@1f000 { + status = "disabled"; + }; + }; + mct@10050000 { compatible = "none"; }; @@ -53,6 +68,12 @@ enable-active-high; }; + hsotg@12480000 { + vusb_d-supply = <&ldo3_reg>; + vusb_a-supply = <&ldo8_reg>; + status = "okay"; + }; + sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; @@ -62,6 +83,34 @@ status = "okay"; }; + sdhci_sd: sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo5_reg>; + cd-gpios = <&gpx3 4 0>; + cd-inverted; + status = "okay"; + }; + + ehci@12580000 { + status = "okay"; + port@0 { + status = "okay"; + }; + }; + + ohci@12590000 { + status = "okay"; + port@0 { + status = "okay"; + }; + }; + + exynos-usbphy@125B0000 { + status = "okay"; + }; + serial@13800000 { status = "okay"; }; @@ -201,6 +250,7 @@ regulator-name = "VUSB+MIPI_1.1V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; + regulator-always-on; }; ldo4_reg: LDO4 { @@ -231,6 +281,7 @@ regulator-name = "VUSB+VDAC_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; ldo9_reg: LDO9 { @@ -413,6 +464,29 @@ compatible = "samsung,s5p6440-pwm"; status = "okay"; }; + + camera { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <>; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + }; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cacf6140dd2f..ee3001f38821 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,24 @@ pinctrl2 = &pinctrl_2; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x20000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@1f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x1f000 0x1000>; + }; + }; + pd_lcd1: lcd1-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index e2c0dcab4d81..e925c9fbfb07 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/input/input.h> / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -48,6 +49,14 @@ }; }; + watchdog@10060000 { + status = "okay"; + }; + + rtc@10070000 { + status = "okay"; + }; + pinctrl@11000000 { keypad_rows: keypad-rows { samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; @@ -76,37 +85,37 @@ key_home { keypad,row = <0>; keypad,column = <0>; - linux,code = <102>; + linux,code = <KEY_HOME>; }; key_down { keypad,row = <0>; keypad,column = <1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; }; key_up { keypad,row = <1>; keypad,column = <0>; - linux,code = <103>; + linux,code = <KEY_UP>; }; key_menu { keypad,row = <1>; keypad,column = <1>; - linux,code = <139>; + linux,code = <KEY_MENU>; }; key_back { keypad,row = <2>; keypad,column = <0>; - linux,code = <158>; + linux,code = <KEY_BACK>; }; key_enter { keypad,row = <2>; keypad,column = <1>; - linux,code = <28>; + linux,code = <KEY_ENTER>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 9583563dd0ef..77878447b312 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -20,7 +20,8 @@ compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; aliases { - i2c8 = &i2c_ak8975; + i2c9 = &i2c_ak8975; + i2c10 = &i2c_cm36651; }; memory { @@ -80,39 +81,67 @@ enable-active-high; }; - /* More to come */ + cam_af_reg: voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpm0 4 0>; + enable-active-high; + }; + + cam_isp_core_reg: voltage-regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "CAM_ISP_CORE_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpm0 3 0>; + enable-active-high; + regulator-always-on; + }; + + ps_als_reg: voltage-regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "LED_A_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpj0 5 0>; + enable-active-high; + }; }; gpio-keys { compatible = "gpio-keys"; key-down { - interrupt-parent = <&gpj1>; - interrupts = <2 0>; - gpios = <&gpj1 2 1>; + gpios = <&gpx3 3 1>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; key-up { - interrupt-parent = <&gpj1>; - interrupts = <1 0>; - gpios = <&gpj1 1 1>; + gpios = <&gpx2 2 1>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; key-power { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; gpios = <&gpx2 7 1>; linux,code = <116>; label = "power"; debounce-interval = <10>; gpio-key,wakeup; }; + + key-ok { + gpios = <&gpx0 1 1>; + linux,code = <139>; + label = "ok"; + debounce-inteval = <10>; + gpio-key,wakeup; + }; }; adc: adc@126C0000 { @@ -140,6 +169,38 @@ }; }; + i2c_0: i2c@13860000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + vdd-int-supply = <&buck9_reg>; + vddio-cis-supply = <&ldo9_reg>; + vdda-supply = <&ldo17_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-af-supply = <&cam_af_reg>; + vdd-reg-supply = <&cam_io_reg>; + clock-frequency = <24000000>; + /* CAM_A_CLKOUT */ + clocks = <&camera 0>; + clock-names = "cis_extclk"; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; + i2c@138D0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -503,12 +564,28 @@ status = "okay"; ak8975@0c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; }; }; + i2c_cm36651: i2c-gpio-2 { + compatible = "i2c-gpio"; + gpios = <&gpf0 0 1>, <&gpf0 1 1>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 2>; + vled-supply = <&ps_als_reg>; + }; + }; + spi_1: spi@13930000 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; @@ -586,8 +663,8 @@ status = "okay"; }; - camera { - pinctrl-0 = <&cam_port_b_clk_active>; + camera: camera { + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; status = "okay"; @@ -607,6 +684,23 @@ status = "okay"; }; + csis_0: csis@11880000 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + clock-frequency = <176000000>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; + }; + csis_1: csis@11890000 { vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; @@ -647,10 +741,11 @@ reg = <0x10>; svdda-supply = <&cam_io_reg>; svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; clock-frequency = <24000000>; /* CAM_B_CLKOUT */ - clocks = <&clock_cam 1>; - clock-names = "mclk"; + clocks = <&camera 1>; + clock-names = "extclk"; samsung,camclk-out = <1>; gpios = <&gpm1 6 0>; @@ -665,6 +760,16 @@ }; }; + exynos-usbphy@125B0000 { + status = "okay"; + }; + + hsotg@12480000 { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + status = "okay"; + }; + thermistor-ap@0 { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 15d3c0ac2f5f..c42a3e196cd5 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -29,4 +29,8 @@ gic: interrupt-controller@10490000 { cpu-offset = <0x4000>; }; + + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4412-pmu", "syscon"; + }; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index c4a9306f8529..c5a943df1cd7 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -37,6 +37,24 @@ interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; @@ -119,6 +137,10 @@ interrupts = <0 72 0>; }; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4212-pmu", "syscon"; + }; + g2d@10800000 { compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; @@ -243,4 +265,9 @@ clock-names = "biu", "ciu"; status = "disabled"; }; + + exynos-usbphy@125B0000 { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 090f9830b129..d0de1f50d15b 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -12,6 +12,7 @@ /dts-v1/; #include "exynos5250.dtsi" #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -107,6 +108,7 @@ regulator-name = "VDD_IOPERI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; op_mode = <1>; }; @@ -444,42 +446,42 @@ menu { label = "SW-TACT2"; gpios = <&gpx1 4 1>; - linux,code = <139>; + linux,code = <KEY_MENU>; gpio-key,wakeup; }; home { label = "SW-TACT3"; gpios = <&gpx1 5 1>; - linux,code = <102>; + linux,code = <KEY_HOME>; gpio-key,wakeup; }; up { label = "SW-TACT4"; gpios = <&gpx1 6 1>; - linux,code = <103>; + linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "SW-TACT5"; gpios = <&gpx1 7 1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "SW-TACT6"; gpios = <&gpx2 0 1>; - linux,code = <158>; + linux,code = <KEY_BACK>; gpio-key,wakeup; }; wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 1>; - linux,code = <143>; + linux,code = <KEY_WAKEUP>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi index 2c1560d52f1a..89ac90f59e2e 100644 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi @@ -240,7 +240,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - hdmiphy@38 { + hdmiphy: hdmiphy@38 { compatible = "samsung,exynos4212-hdmiphy"; reg = <0x38>; }; @@ -304,6 +304,10 @@ hdmi { hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; }; gpio-keys { diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 9a49e6804ae1..886cfca044ac 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -351,6 +351,34 @@ samsung,pin-drv = <0>; }; + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c7_bus: i2c7-bus { samsung,pins = "gpb2-2", "gpb2-3"; samsung,pin-function = <3>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 1ce1088a00fb..079fdf9e3f18 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -25,6 +25,13 @@ }; pinctrl@11400000 { + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + sd3_clk: sd3-clk { samsung,pin-drv = <0>; }; @@ -37,6 +44,50 @@ sd3_bus4: sd3-bus-width4 { samsung,pin-drv = <0>; }; + + max98095_en: max98095-en { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@13400000 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; gpio-keys { @@ -52,6 +103,12 @@ }; }; + vbat: vbat-fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + }; + i2c-arbitrator { compatible = "i2c-arb-gpio-challenge"; #address-cells = <1>; @@ -65,6 +122,9 @@ wait-retry-us = <3000>; wait-free-us = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&arb_our_claim &arb_their_claim>; + /* Use ID 104 as a hint that we're on physical bus 4 */ i2c_104: i2c@0 { reg = <0>; @@ -82,6 +142,8 @@ reg = <0x1e>; interrupts = <6 0>; interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; wakeup-source; keyboard-controller { @@ -173,6 +235,83 @@ 0x070c0069>; /* LEFT */ }; }; + + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; }; }; @@ -196,6 +335,41 @@ }; }; + i2c@12CD0000 { + max98095: codec@11 { + compatible = "maxim,max98095"; + reg = <0x11>; + pinctrl-0 = <&max98095_en>; + pinctrl-names = "default"; + }; + }; + + i2s0: i2s@03830000 { + status = "okay"; + }; + + sound { + compatible = "google,snow-audio-max98095"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98095>; + }; + + usb3_vbus_reg: regulator-usb3 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpx2 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_en>; + enable-active-high; + }; + + phy@12100000 { + vbus-supply = <&usb3_vbus_reg>; + }; + usb@12110000 { samsung,vbus-gpio = <&gpx1 1 0>; }; @@ -206,4 +380,54 @@ clock-frequency = <24000000>; }; }; + + hdmi { + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + fimd@14400000 { + status = "okay"; + samsung,invert-vclk; + }; + + dp-controller@145B0000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 37423314a028..834fb5a5306f 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -72,6 +72,24 @@ }; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x30000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; @@ -175,6 +193,11 @@ reg = <0x10040000 0x5000>; }; + sysreg_system_controller: syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; + watchdog@101D0000 { compatible = "samsung,exynos5250-wdt"; reg = <0x101D0000 0x100>; @@ -250,7 +273,7 @@ sata_phy: sata-phy@12170000 { compatible = "samsung,exynos5250-sata-phy"; reg = <0x12170000 0x1ff>; - clocks = <&clock 287>; + clocks = <&clock CLK_SATA_PHYCTRL>; clock-names = "sata_phyctrl"; #phy-cells = <0>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -533,22 +556,18 @@ compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; - usb-phy = <&usb2_phy &usb3_phy>; + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; }; }; - usb3_phy: usbphy@12100000 { - compatible = "samsung,exynos5250-usb3phy"; + usbdrd_phy: phy@12100000 { + compatible = "samsung,exynos5250-usbdrd-phy"; reg = <0x12100000 0x100>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>; - clock-names = "ext_xtal", "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbphy-sys { - reg = <0x10040704 0x8>; - }; + clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; }; usb@12110000 { @@ -558,6 +577,12 @@ clocks = <&clock CLK_USB2>; clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; usb@12120000 { @@ -567,6 +592,12 @@ clocks = <&clock CLK_USB2>; clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; usb2_phy: usbphy@12130000 { @@ -584,6 +615,16 @@ }; }; + usb2_phy_gen: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; + }; + pwm: pwm@12dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x12dd0000 0x100>; @@ -690,6 +731,7 @@ <&clock CLK_MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; + samsung,syscon-phandle = <&pmu_system_controller>; }; mixer { @@ -733,7 +775,7 @@ compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x10000>; interrupts = <0 112 0>; - clocks = <&clock 348>; + clocks = <&clock CLK_SSS>; clock-names = "secss"; }; }; diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi new file mode 100644 index 000000000000..f6ee55ea0708 --- /dev/null +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -0,0 +1,574 @@ +/* + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb5: gpb5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + usb3_vbus0_en: usb3-vbus0-en { + samsung,pins = "gpa2-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spdif1_bus: spdif1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c0_hs_bus: i2c0-hs-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c1_hs_bus: i2c1-hs-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c2_hs_bus: i2c2-hs-bus { + samsung,pins = "gpb3-4", "gpb3-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c3_hs_bus: i2c3-hs-bus { + samsung,pins = "gpb3-6", "gpb3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb4-0", "gpb4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb4-2", "gpb4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpb4-4", "gpb4-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpb4-6", "gpb4-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c8_bus: i2c8-bus { + samsung,pins = "gpb5-0", "gpb5-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c9_bus: i2c9-bus { + samsung,pins = "gpb5-2", "gpb5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c10_bus: i2c10-bus { + samsung,pins = "gpb5-4", "gpb5-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c11_bus: i2c11-bus { + samsung,pins = "gpb5-6", "gpb5-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_2 { + gpz0: gpz0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpz1: gpz1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts new file mode 100644 index 000000000000..8c84ab27c19b --- /dev/null +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -0,0 +1,103 @@ +/* + * SAMSUNG XYREF5260 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5260.dtsi" + +/ { + model = "SAMSUNG XYREF5260 board based on EXYNOS5260"; + compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + xrtcxti: xrtcxti { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xrtcxti"; + #clock-cells = <0>; + }; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + bypass-smu; + supports-highspeed; + supports-hs200-mode; /* 200 Mhz */ + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi new file mode 100644 index 000000000000..5398a60207ca --- /dev/null +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -0,0 +1,304 @@ +/* + * SAMSUNG EXYNOS5260 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "skeleton.dtsi" + +#include <dt-bindings/clock/exynos5260-clk.h> + +/ { + compatible = "samsung,exynos5260", "samsung,exynos5"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + cci-control-port = <&cci_control1>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + cci-control-port = <&cci_control1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cci-control-port = <&cci_control0>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cci-control-port = <&cci_control0>; + }; + + cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cci-control-port = <&cci_control0>; + }; + + cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cci-control-port = <&cci_control0>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_top: clock-controller@10010000 { + compatible = "samsung,exynos5260-clock-top"; + reg = <0x10010000 0x10000>; + #clock-cells = <1>; + }; + + clock_peri: clock-controller@10200000 { + compatible = "samsung,exynos5260-clock-peri"; + reg = <0x10200000 0x10000>; + #clock-cells = <1>; + }; + + clock_egl: clock-controller@10600000 { + compatible = "samsung,exynos5260-clock-egl"; + reg = <0x10600000 0x10000>; + #clock-cells = <1>; + }; + + clock_kfc: clock-controller@10700000 { + compatible = "samsung,exynos5260-clock-kfc"; + reg = <0x10700000 0x10000>; + #clock-cells = <1>; + }; + + clock_g2d: clock-controller@10A00000 { + compatible = "samsung,exynos5260-clock-g2d"; + reg = <0x10A00000 0x10000>; + #clock-cells = <1>; + }; + + clock_mif: clock-controller@10CE0000 { + compatible = "samsung,exynos5260-clock-mif"; + reg = <0x10CE0000 0x10000>; + #clock-cells = <1>; + }; + + clock_mfc: clock-controller@11090000 { + compatible = "samsung,exynos5260-clock-mfc"; + reg = <0x11090000 0x10000>; + #clock-cells = <1>; + }; + + clock_g3d: clock-controller@11830000 { + compatible = "samsung,exynos5260-clock-g3d"; + reg = <0x11830000 0x10000>; + #clock-cells = <1>; + }; + + clock_fsys: clock-controller@122E0000 { + compatible = "samsung,exynos5260-clock-fsys"; + reg = <0x122E0000 0x10000>; + #clock-cells = <1>; + }; + + clock_aud: clock-controller@128C0000 { + compatible = "samsung,exynos5260-clock-aud"; + reg = <0x128C0000 0x10000>; + #clock-cells = <1>; + }; + + clock_isp: clock-controller@133C0000 { + compatible = "samsung,exynos5260-clock-isp"; + reg = <0x133C0000 0x10000>; + #clock-cells = <1>; + }; + + clock_gscl: clock-controller@13F00000 { + compatible = "samsung,exynos5260-clock-gscl"; + reg = <0x13F00000 0x10000>; + #clock-cells = <1>; + }; + + clock_disp: clock-controller@14550000 { + compatible = "samsung,exynos5260-clock-disp"; + reg = <0x14550000 0x10000>; + #clock-cells = <1>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + chipid: chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + mct: mct@100B0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x100B0000 0x1000>; + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; + clock-names = "fin_pll", "mct"; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 122 0>, <0 123 0>, + <0 124 0>, <0 125 0>, <0 126 0>, + <0 127 0>, <0 128 0>, <0 129 0>; + }; + + cci: cci@10F00000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10F00000 0x1000>; + ranges = <0x0 0x10F00000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + pinctrl_0: pinctrl@11600000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x11600000 0x1000>; + interrupts = <0 79 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@12290000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x12290000 0x1000>; + interrupts = <0 157 0>; + }; + + pinctrl_2: pinctrl@128B0000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x128B0000 0x1000>; + interrupts = <0 243 0>; + }; + + uart0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 146 0>; + clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 147 0>; + clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 148 0>; + clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart3: serial@12860000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12860000 0x100>; + interrupts = <0 145 0>; + clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + mmc_0: mmc@12140000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12140000 0x2000>; + interrupts = <0 156 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + + mmc_1: mmc@12150000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12150000 0x2000>; + interrupts = <0 158 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + + mmc_2: mmc@12160000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12160000 0x2000>; + interrupts = <0 159 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + }; +}; + +#include "exynos5260-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts new file mode 100644 index 000000000000..7275bbd6fc4b --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -0,0 +1,82 @@ +/* + * SAMSUNG SMDK5410 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5410.dtsi" +/ { + model = "Samsung SMDK5410 board based on EXYNOS5410"; + compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + firmware@02037000 { + compatible = "samsung,secure-firmware"; + reg = <0x02037000 0x1000>; + }; + +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi new file mode 100644 index 000000000000..3839c26f467f --- /dev/null +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -0,0 +1,206 @@ +/* + * SAMSUNG EXYNOS5410 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file. + * EXYNOS5410 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/exynos5410.h> + +/ { + compatible = "samsung,exynos5410", "samsung,exynos5"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + mct: mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0xB00>; + interrupt-parent = <&interrupt_map>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; + clocks = <&fin_pll>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + interrupt_map: interrupt-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + }; + + clock: clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12210000 0x1000>; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12220000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + uart0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 80a3bf4c5986..434fd9d3e09d 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -26,6 +26,11 @@ bootargs = "console=ttySAC3,115200"; }; + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + fixed-rate-clocks { oscclk { compatible = "samsung,exynos5420-oscclk"; @@ -37,6 +42,11 @@ status = "okay"; }; + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; + mmc@12200000 { status = "okay"; broken-cd; @@ -364,16 +374,4 @@ gpio-key,wakeup; }; }; - - amba { - mdma1: mdma@11C10000 { - /* - * MDMA1 can support both secure and non-secure - * AXI transactions. When this is enabled in the kernel - * for boards that run in secure mode, we are getting - * imprecise external aborts causing the kernel to oops. - */ - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts new file mode 100644 index 000000000000..1c5b8f9f4a36 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -0,0 +1,287 @@ +/* + * Google Peach Pit Rev 6+ board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "exynos5420.dtsi" + +/ { + model = "Google Peach Pit Rev 6+"; + + compatible = "google,pit-rev16", + "google,pit-rev15", "google,pit-rev14", + "google,pit-rev13", "google,pit-rev12", + "google,pit-rev11", "google,pit-rev10", + "google,pit-rev9", "google,pit-rev8", + "google,pit-rev7", "google,pit-rev6", + "google,pit", "google,peach","samsung,exynos5420", + "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>; + + power { + label = "Power"; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + sound { + compatible = "google,snow-audio-max98090"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98090>; + }; + + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; +}; + +&pinctrl_0 { + max98090_irq: max98090-irq { + samsung,pins = "gpx0-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_3 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&uart_3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + caps2-mmc-hs200-1_8v; + supports-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&hsi2c_7 { + status = "okay"; + + max98090: codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupts = <2 0>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98090_irq>; + }; +}; + +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; + }; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&usbdrd_phy0 { + vbus-supply = <&usb300_vbus_reg>; +}; + +&usbdrd_phy1 { + vbus-supply = <&usb301_vbus_reg>; +}; + +/* + * Use longest HW watchdog in SoC (32 seconds) since the hardware + * watchdog provides no debugging information (compared to soft/hard + * lockup detectors) and so should be last resort. + */ +&watchdog { + timeout-sec = <32>; +}; + +&i2s0 { + status = "okay"; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x06>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index e62c8eb57438..ba686e40eac7 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -624,6 +624,34 @@ samsung,pin-drv = <0>; }; + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c7_hs_bus: i2c7-hs-bus { samsung,pins = "gpb2-2", "gpb2-3"; samsung,pin-function = <3>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 69104850eb5e..6052aa9c5659 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -68,6 +68,11 @@ status = "okay"; }; + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; + mmc@12200000 { status = "okay"; broken-cd; @@ -140,6 +145,22 @@ }; }; + pinctrl@14000000 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gpg0-5"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gpg1-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + hdmi@14530000 { status = "okay"; hpd-gpio = <&gpx3 7 0>; @@ -147,6 +168,36 @@ pinctrl-0 = <&hdmi_hpd_irq>; }; + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpg0 5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "VBUS1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpg1 4 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; + + phy@12100000 { + vbus-supply = <&usb300_vbus_reg>; + }; + + phy@12500000 { + vbus-supply = <&usb301_vbus_reg>; + }; + i2c_2: i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c3a9a66c5767..e38532271ef9 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -47,6 +47,8 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; + usbdrdphy0 = &usbdrd_phy0; + usbdrdphy1 = &usbdrd_phy1; }; cpus { @@ -58,6 +60,7 @@ compatible = "arm,cortex-a15"; reg = <0x0>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu1: cpu@1 { @@ -65,6 +68,7 @@ compatible = "arm,cortex-a15"; reg = <0x1>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu2: cpu@2 { @@ -72,6 +76,7 @@ compatible = "arm,cortex-a15"; reg = <0x2>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu3: cpu@3 { @@ -79,6 +84,7 @@ compatible = "arm,cortex-a15"; reg = <0x3>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu4: cpu@100 { @@ -86,6 +92,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu5: cpu@101 { @@ -93,6 +100,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu6: cpu@102 { @@ -100,6 +108,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu7: cpu@103 { @@ -107,6 +116,44 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + }; + }; + + cci@10d20000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10d20000 0x1000>; + ranges = <0x0 0x10d20000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; }; }; @@ -125,12 +172,13 @@ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; - codec@11000000 { + mfc: codec@11000000 { compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; + samsung,power-domain = <&mfc_pd>; }; mmc_0: mmc@12200000 { @@ -169,7 +217,7 @@ status = "disabled"; }; - mct@101C0000 { + mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; @@ -219,16 +267,6 @@ reg = <0x100440C0 0x20>; }; - mau_pd: power-domain@100440E0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440E0 0x20>; - }; - - g2d_pd: power-domain@10044100 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044100 0x20>; - }; - msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; @@ -270,7 +308,7 @@ interrupts = <0 47 0>; }; - rtc@101E0000 { + rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -336,6 +374,13 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in the kernel + * for boards that run in secure mode, we are getting + * imprecise external aborts causing the kernel to oops. + */ + status = "disabled"; }; }; @@ -385,7 +430,7 @@ spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; + interrupts = <0 68 0>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -401,7 +446,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; - interrupts = <0 67 0>; + interrupts = <0 69 0>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -417,7 +462,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; - interrupts = <0 68 0>; + interrupts = <0 70 0>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -430,22 +475,22 @@ status = "disabled"; }; - serial@12C00000 { + uart_0: serial@12C00000 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C10000 { + uart_1: serial@12C10000 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C20000 { + uart_2: serial@12C20000 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C30000 { + uart_3: serial@12C30000 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; @@ -465,14 +510,14 @@ #phy-cells = <0>; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { clocks = <&clock CLK_DP1>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; - fimd@14400000 { + fimd: fimd@14400000 { samsung,power-domain = <&disp_pd>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; @@ -549,7 +594,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock CLK_I2C4>; + clocks = <&clock CLK_USI0>; clock-names = "hsi2c"; status = "disabled"; }; @@ -562,7 +607,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock CLK_I2C5>; + clocks = <&clock CLK_USI1>; clock-names = "hsi2c"; status = "disabled"; }; @@ -575,7 +620,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock CLK_I2C6>; + clocks = <&clock CLK_USI2>; clock-names = "hsi2c"; status = "disabled"; }; @@ -588,7 +633,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock CLK_I2C7>; + clocks = <&clock CLK_USI3>; clock-names = "hsi2c"; status = "disabled"; }; @@ -601,7 +646,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock CLK_I2C8>; + clocks = <&clock CLK_USI4>; clock-names = "hsi2c"; status = "disabled"; }; @@ -614,7 +659,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock CLK_I2C9>; + clocks = <&clock CLK_USI5>; clock-names = "hsi2c"; status = "disabled"; }; @@ -627,13 +672,13 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock CLK_I2C10>; + clocks = <&clock CLK_USI6>; clock-names = "hsi2c"; status = "disabled"; }; - hdmi@14530000 { - compatible = "samsung,exynos4212-hdmi"; + hdmi: hdmi@14530000 { + compatible = "samsung,exynos5420-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, @@ -641,10 +686,16 @@ <&clock CLK_MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; + phy = <&hdmiphy>; + samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; - mixer@14450000 { + hdmiphy: hdmiphy@145D0000 { + reg = <0x145D0000 0x20>; + }; + + mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; @@ -675,6 +726,11 @@ reg = <0x10040000 0x5000>; }; + sysreg_system_controller: syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; + tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; @@ -715,7 +771,7 @@ clock-names = "tmu_apbif", "tmu_triminfo_apbif"; }; - watchdog@101D0000 { + watchdog: watchdog@101D0000 { compatible = "samsung,exynos5420-wdt"; reg = <0x101D0000 0x100>; interrupts = <0 42 0>; @@ -724,12 +780,103 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; - sss@10830000 { + sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x10000>; interrupts = <0 112 0>; - clocks = <&clock 471>; + clocks = <&clock CLK_SSS>; clock-names = "secss"; - samsung,power-domain = <&g2d_pd>; + }; + + usbdrd3_0: usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "snps,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy0: phy@12100000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12100000 0x100>; + clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbdrd3_1: usb@12400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "snps,dwc3"; + reg = <0x12400000 0x10000>; + interrupts = <0 73 0>; + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy1: phy@12500000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12500000 0x100>; + clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbhost2: usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usbhost1: usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usb2_phy: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 84f77c2fe4d4..ae3a17c791f6 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -176,7 +176,7 @@ clock-names = "i2c"; }; - watchdog { + watchdog@110000 { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; interrupts = <0 1 0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts new file mode 100644 index 000000000000..f3af2079a063 --- /dev/null +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -0,0 +1,253 @@ +/* + * Google Peach Pi Rev 10+ board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "exynos5800.dtsi" + +/ { + model = "Google Peach Pi Rev 10+"; + + compatible = "google,pi-rev16", + "google,pi-rev15", "google,pi-rev14", + "google,pi-rev13", "google,pi-rev12", + "google,pi-rev11", "google,pi-rev10", + "google,pi", "google,peach", "samsung,exynos5800", + "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>; + + power { + label = "Power"; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; +}; + +&pinctrl_0 { + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_3 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&uart_3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + caps2-mmc-hs200-1_8v; + supports-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <150660000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <60>; + hback-porch = <172>; + hsync-len = <80>; + vback-porch = <25>; + vfront-porch = <10>; + vsync-len = <10>; + }; + }; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; + }; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&usbdrd_phy0 { + vbus-supply = <&usb300_vbus_reg>; +}; + +&usbdrd_phy1 { + vbus-supply = <&usb301_vbus_reg>; +}; + +/* + * Use longest HW watchdog in SoC (32 seconds) since the hardware + * watchdog provides no debugging information (compared to soft/hard + * lockup detectors) and so should be last resort. + */ +&watchdog { + timeout-sec = <32>; +}; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi new file mode 100644 index 000000000000..c0bb3563cac1 --- /dev/null +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -0,0 +1,28 @@ +/* + * SAMSUNG EXYNOS5800 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file. + * EXYNOS5800 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5420.dtsi" + +/ { + compatible = "samsung,exynos5800", "samsung,exynos5"; +}; + +&clock { + compatible = "samsung,exynos5800-clock"; +}; + +&mfc { + compatible = "samsung,mfc-v8"; +}; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 62fb3da50bdb..ad12da38fc92 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -172,3 +172,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index f8db366c46ff..9b31faa96377 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -16,21 +16,98 @@ model = "Ka-Ro TX25"; compatible = "karo,imx25-tx25", "fsl,imx25"; + chosen { + stdout-path = &uart1; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_fec_phy: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "fec-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 9 0>; + enable-active-high; + }; + }; + memory { reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; }; +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0x80000000 + MX25_PAD_UART1_CTS__UART1_CTS 0x80000000 + MX25_PAD_UART1_RTS__UART1_RTS 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */ + MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */ + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX25_PAD_NF_CE0__NF_CE0 0x80000000 + MX25_PAD_NFWE_B__NFWE_B 0x80000000 + MX25_PAD_NFRE_B__NFRE_B 0x80000000 + MX25_PAD_NFALE__NFALE 0x80000000 + MX25_PAD_NFCLE__NFCLE 0x80000000 + MX25_PAD_NFWP_B__NFWP_B 0x80000000 + MX25_PAD_NFRB__NFRB 0x80000000 + MX25_PAD_D7__D7 0x80000000 + MX25_PAD_D6__D6 0x80000000 + MX25_PAD_D5__D5 0x80000000 + MX25_PAD_D4__D4 0x80000000 + MX25_PAD_D3__D3 0x80000000 + MX25_PAD_D2__D2 0x80000000 + MX25_PAD_D1__D1 0x80000000 + MX25_PAD_D0__D0 0x80000000 + >; + }; +}; + &uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-reset-gpios = <&gpio3 7 0>; phy-mode = "rmii"; + phy-supply = <®_fec_phy>; status = "okay"; }; &nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; nand-on-flash-bbt; + nand-ecc-mode = "hw"; + nand-bus-width = <8>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index f607ce520eda..c608942b8a3b 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "imx25.dtsi" / { @@ -19,18 +20,232 @@ memory { reg = <0x80000000 0x4000000>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_fec_3v3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 3 0>; + enable-active-high; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_can_3v3: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 6 0>; + }; + }; + + sound { + compatible = "fsl,imx25-pdk-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx25-pdk-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; }; -&uart1 { +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio2 1 0>; + wp-gpios = <&gpio2 0 0>; status = "okay"; }; &fec { phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 8 0>; status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 129>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + imx25-pdk { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX25_PAD_RW__AUD4_TXFS 0xe0 + MX25_PAD_OE__AUD4_TXC 0xe0 + MX25_PAD_EB0__AUD4_TXD 0xe0 + MX25_PAD_EB1__AUD4_RXD 0xe0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX25_PAD_GPIO_A__CAN1_TX 0x0 + MX25_PAD_GPIO_B__CAN1_RX 0x0 + MX25_PAD_D14__GPIO_4_6 0x80000000 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX25_PAD_SD1_CMD__SD1_CMD 0x80000000 + MX25_PAD_SD1_CLK__SD1_CLK 0x80000000 + MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000 + MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000 + MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000 + MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000 + MX25_PAD_A14__GPIO_2_0 0x80000000 + MX25_PAD_A15__GPIO_2_1 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 + MX25_PAD_A17__GPIO_2_3 0x80000000 + MX25_PAD_D12__GPIO_4_8 0x80000000 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 + MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 + MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 + MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 + MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 + MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 + MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 + MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 + MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 + >; + }; + + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_RTS__UART1_RTS 0xe0 + MX25_PAD_UART1_CTS__UART1_CTS 0xe0 + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0xc0 + >; + }; + }; +}; + &nfc { nand-on-flash-bbt; status = "okay"; }; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) + MATRIX_KEY(0x0, 0x1, KEY_DOWN) + MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN) + MATRIX_KEY(0x0, 0x3, KEY_HOME) + MATRIX_KEY(0x1, 0x0, KEY_RIGHT) + MATRIX_KEY(0x1, 0x1, KEY_LEFT) + MATRIX_KEY(0x1, 0x2, KEY_ENTER) + MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP) + MATRIX_KEY(0x2, 0x0, KEY_F6) + MATRIX_KEY(0x2, 0x1, KEY_F8) + MATRIX_KEY(0x2, 0x2, KEY_F9) + MATRIX_KEY(0x2, 0x3, KEY_F10) + MATRIX_KEY(0x3, 0x0, KEY_F1) + MATRIX_KEY(0x3, 0x1, KEY_F2) + MATRIX_KEY(0x3, 0x2, KEY_F3) + MATRIX_KEY(0x3, 0x2, KEY_POWER) + >; + status = "okay"; +}; + +&ssi1 { + codec-handle = <&codec>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index ea323f09dc78..bb74d9582b7e 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -14,6 +14,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -21,6 +22,8 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + mmc0 = &esdhc1; + mmc1 = &esdhc2; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -165,9 +168,10 @@ status = "disabled"; }; - kpp@43fa8000 { + kpp: kpp@43fa8000 { #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; clocks = <&clks 102>; clock-names = ""; @@ -482,23 +486,13 @@ clocks = <&clks 99>; }; - usbphy1: usbphy@1 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - - usbphy2: usbphy@2 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - usbotg: usb@53ff4000 { compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 70>; fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -506,9 +500,9 @@ compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 70>; fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -518,7 +512,6 @@ clocks = <&clks 9>, <&clks 70>, <&clks 8>; clock-names = "ipg", "ahb", "per"; reg = <0x53ff4600 0x00f>; - status = "disabled"; }; dryice@53ffc000 { @@ -530,6 +523,11 @@ }; }; + iram: sram@78000000 { + compatible = "mmio-sram"; + reg = <0x78000000 0x20000>; + }; + emi@80000000 { compatible = "fsl,emi-bus", "simple-bus"; #address-cells = <1>; @@ -550,4 +548,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@0 { + reg = <0>; + compatible = "usb-nop-xceiv"; + }; + + usbphy1: usb-phy@1 { + reg = <1>; + compatible = "usb-nop-xceiv"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 5ce89aa275df..4c317716b510 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -17,15 +17,181 @@ compatible = "fsl,imx27-pdk", "fsl,imx27"; memory { - reg = <0x0 0x0>; + reg = <0xa0000000 0x08000000>; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; +}; + +&cspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cspi2>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic: mc13783@0 { + compatible = "fsl,mc13783"; + reg = <0>; + spi-cs-high; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + + regulators { + vgen_reg: vgen { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc1_reg: vmmc1 { + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + }; + + gpo1_reg: gpo1 { + regulator-always-on; + regulator-boot-on; + }; + + gpo3_reg: gpo3 { + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&fec { + phy-mode = "mii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + status = "okay"; +}; + +&kpp { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + >; + status = "okay"; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; }; &uart1 { fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; -&fec { +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + fsl,usbphy = <&usbphy0>; + phy_type = "ulpi"; status = "okay"; }; + +&iomuxc { + imx27-pdk { + pinctrl_cspi2: cspi2grp { + fsl,pins = < + MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 + MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 + MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0 + MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */ + MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; + + pinctrl_nand: nandgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 3c3964a99637..7c869fe3c30b 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -15,6 +15,10 @@ model = "Phytec pca100 rapid development kit"; compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27"; + chosen { + stdout-path = &uart1; + }; + display: display { model = "Primeview-PD050VL1"; native-mode = <&timing0>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index df3b2e731835..fe02bc7a24fd 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -12,14 +12,79 @@ / { model = "Phytec pcm970"; compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27"; + + chosen { + stdout-path = &uart1; + }; + + display0: LQ035Q7 { + model = "Sharp-LQ035Q7"; + native-mode = <&timing0>; + bits-per-pixel = <16>; + fsl,pcr = <0xf00080c0>; + + display-timings { + timing0: 240x320 { + clock-frequency = <5500000>; + hactive = <240>; + vactive = <320>; + hback-porch = <5>; + hsync-len = <7>; + hfront-porch = <16>; + vback-porch = <7>; + vsync-len = <1>; + vfront-porch = <9>; + pixelclk-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <0>; + }; + }; + }; + + regulators { + regulator@2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csien>; + reg = <2>; + regulator-name = "CSI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + }; + + usbphy { + usbphy2: usbphy@2 { + compatible = "usb-nop-xceiv"; + reg = <2>; + vcc-supply = <®_5v0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &cspi1 { + pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; +&fb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imxfb1>; + display = <&display0>; + lcd-supply = <®_5v0>; + fsl,dmacr = <0x00020010>; + fsl,lscr1 = <0x00120300>; + fsl,lpccr = <0x00a903ff>; + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -36,6 +101,50 @@ &iomuxc { imx27_phycore_rdk { + pinctrl_csien: csiengrp { + fsl,pins = < + MX27_PAD_USB_OC_B__GPIO2_24 0x0 + >; + }; + + pinctrl_cspi1cs1: cspi1cs1grp { + fsl,pins = < + MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 + >; + }; + + pinctrl_imxfb1: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CLS__CLS 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_LSCLK__LSCLK 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_PS__PS 0x0 + MX27_PAD_REV__REV 0x0 + MX27_PAD_SPL_SPR__SPL_SPR 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; + pinctrl_i2c1: i2c1grp { /* Add pullup to DATA line */ fsl,pins = < @@ -193,19 +302,16 @@ dr_mode = "host"; phy_type = "ulpi"; vbus-supply = <®_5v0>; + fsl,usbphy = <&usbphy2>; disable-over-current; status = "okay"; }; -&usbphy2 { - vcc-supply = <®_5v0>; -}; - &weim { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weim>; - can@d4000000 { + can@4,0 { compatible = "nxp,sja1000"; reg = <4 0x00000000 0x00000100>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index cefaa6994623..31e9f7049f73 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -41,6 +41,20 @@ regulator-max-microvolt = <5000000>; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + vcc-supply = <&sw3_reg>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &audmux { @@ -66,9 +80,9 @@ status = "okay"; pmic: mc13783@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13783"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0>; spi-cs-high; spi-max-frequency = <20000000>; @@ -166,7 +180,7 @@ &fec { phy-mode = "mii"; - phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -204,7 +218,6 @@ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */ - MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ >; }; @@ -251,6 +264,21 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI1_FS__SSI1_FS 0x0 + MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0 + MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0 + MX27_PAD_SSI1_CLK__SSI1_CLK 0x0 + >; + }; + pinctrl_usbotg: usbotggrp { fsl,pins = < MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 @@ -279,23 +307,28 @@ status = "okay"; }; +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssi1>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; dr_mode = "otg"; phy_type = "ulpi"; + fsl,usbphy = <&usbphy0>; vbus-supply = <&sw3_reg>; + disable-over-current; status = "okay"; }; -&usbphy0 { - vcc-supply = <&sw3_reg>; -}; - &weim { status = "okay"; - nor: nor@c0000000 { + nor: nor@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; @@ -305,7 +338,7 @@ #size-cells = <1>; }; - sram: sram@c8000000 { + sram: sram@1,0 { compatible = "mtd-ram"; reg = <1 0x00000000 0x00800000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 137e010eab35..a75555c39533 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -11,11 +11,13 @@ #include "skeleton.dtsi" #include "imx27-pinfunc.h" +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -71,26 +73,6 @@ }; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - - usbphy2: usbphy@2 { - compatible = "usb-nop-xceiv"; - reg = <2>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -464,9 +446,8 @@ compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 0>; - fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -474,7 +455,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -483,9 +464,8 @@ compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 2>; - fsl,usbphy = <&usbphy2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index 5f326c1c1850..ce1a7effba37 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -25,9 +25,9 @@ ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; + bus-width = <4>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -39,7 +39,7 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */ + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; @@ -82,7 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; @@ -110,12 +110,12 @@ status { label = "duckbill:green:status"; - gpios = <&gpio3 5 0>; + gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; }; failure { label = "duckbill:red:status"; - gpios = <&gpio3 4 0>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 90a579532b8b..a95cc5358ff4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -9,6 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" #include "imx28-pinfunc.h" diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi index 906ae937b013..9c2b715ab8bf 100644 --- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -37,6 +37,17 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; + + tsc2007: tsc2007@48 { + compatible = "ti,tsc2007"; + gpios = <&gpio3 2 0>; + interrupt-parent = <&gpio3>; + interrupts = <0x2 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007_1>; + reg = <0x48>; + ti,x-plate-ohms = <180>; + }; }; &iomuxc { @@ -70,6 +81,10 @@ MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 >; }; + + pinctrl_tsc2007_1: tsc2007grp-1 { + fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index 1bdec21f4533..f04ae91eea89 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -46,6 +46,14 @@ linux,default-trigger = "heartbeat"; }; }; + + sound { + compatible = "eukrea,asoc-tlv320"; + eukrea,model = "imx35-eukrea-tlv320aic23"; + ssi-controller = <&ssi1>; + fsl,mux-int-port = <1>; + fsl,mux-ext-port = <4>; + }; }; &audmux { @@ -124,6 +132,7 @@ }; &ssi1 { + codec-handle = <&tlv320aic23>; fsl,mode = "i2s-slave"; status = "okay"; }; @@ -141,3 +150,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts new file mode 100644 index 000000000000..8d715523708f --- /dev/null +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -0,0 +1,68 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * Copyright 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx35.dtsi" + +/ { + model = "Freescale i.MX35 Product Development Kit"; + compatible = "fsl,imx35-pdk", "fsl,imx35"; + + memory { + reg = <0x80000000 0x8000000>, + <0x90000000 0x8000000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + status = "okay"; +}; + +&iomuxc { + imx35-pdk { + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5 + MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5 + MX35_PAD_CTS1__UART1_CTS 0x1c5 + MX35_PAD_RTS1__UART1_RTS 0x1c5 + >; + }; + }; +}; + +&nfc { + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 88b218f8f810..4759abb49436 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,6 +13,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -295,9 +296,9 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -305,9 +306,9 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -356,4 +357,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@0 { + reg = <0>; + compatible = "usb-nop-xceiv"; + }; + + usbphy1: usb-phy@1 { + reg = <1>; + compatible = "usb-nop-xceiv"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 9c89d1ca97c2..6a201cf54366 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -17,6 +17,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 9e9deb244b76..6bc3243a80d3 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -17,10 +17,28 @@ model = "Freescale i.MX51 Babbage Board"; compatible = "fsl,imx51-babbage", "fsl,imx51"; + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x90000000 0x20000000>; }; + clocks { + ckih1 { + clock-frequency = <22579200>; + }; + + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + }; + display0: display@di0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; @@ -82,11 +100,13 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; @@ -102,6 +122,36 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_vbus: regulator@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1reg>; + reg = <0>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: regulator@1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgreg>; + reg = <1>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + sound { compatible = "fsl,imx51-babbage-sgtl5000", "fsl,imx-audio-sgtl5000"; @@ -116,41 +166,23 @@ mux-ext-port = <3>; }; - clocks { - ckih1 { - clock-frequency = <22579200>; - }; + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; - clk_26M: codec_clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_DUMMY>; + clock-names = "main_clk"; }; }; }; -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; - status = "okay"; -}; - -&esdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart3 { +&audmux { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; @@ -163,9 +195,9 @@ status = "okay"; pmic: mc13892@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; spi-max-frequency = <6000000>; spi-cs-high; reg = <0>; @@ -280,6 +312,53 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + fsl,cd-controller; + fsl,wp-controller; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clkcodec>; + reg = <0x0a>; + clocks = <&clk_26M>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + }; +}; + &ipu_di0_disp0 { remote-endpoint = <&display0_in>; }; @@ -288,29 +367,74 @@ remote-endpoint = <&display1_in>; }; +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 3, KEY_HOME) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(1, 3, KEY_VOLUMEUP) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + MATRIX_KEY(3, 0, KEY_F1) + MATRIX_KEY(3, 1, KEY_F2) + MATRIX_KEY(3, 2, KEY_F3) + MATRIX_KEY(3, 3, KEY_POWER) + >; + status = "okay"; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; }; -&iomuxc { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; - imx51-babbage { - pinctrl_hog: hoggrp { - fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 - MX51_PAD_GPIO1_5__GPIO1_5 0x100 - MX51_PAD_GPIO1_6__GPIO1_6 0x100 - MX51_PAD_EIM_A27__GPIO2_21 0x5 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 - MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 - MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 - >; - }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usbh1_vbus>; + fsl,usbphy = <&usbh1phy>; + phy_type = "ulpi"; + status = "okay"; +}; +&usbotg { + dr_mode = "otg"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&iomuxc { + imx51-babbage { pinctrl_audmux: audmuxgrp { fsl,pins = < MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 @@ -320,11 +444,19 @@ >; }; + pinctrl_clkcodec: clkcodecgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */ >; }; @@ -336,6 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_1__SD1_WP 0x20d5 >; }; @@ -347,29 +481,38 @@ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */ + MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */ >; }; pinctrl_fec: fecgrp { fsl,pins = < - MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 - MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 - MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 - MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 - MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 - MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 - MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 - MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 - MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 - MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 - MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 - MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 - MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 - MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 - MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 - MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 - MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */ + MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 + MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 + MX51_PAD_NANDF_RB2__FEC_COL 0x00000180 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 + MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004 + MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004 + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180 + MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4 + MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX51_PAD_EIM_A27__GPIO2_21 0x5 >; }; @@ -379,6 +522,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed + MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed @@ -455,6 +605,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 @@ -479,71 +635,33 @@ MX51_PAD_EIM_D24__UART3_CTS 0x1c5 >; }; - }; -}; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000 + >; + }; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; + pinctrl_usbh1reg: usbh1reggrp { + fsl,pins = < + MX51_PAD_EIM_D21__GPIO2_5 0x85 + >; + }; - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clk_26M>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; + pinctrl_usbotgreg: usbotgreggrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0x85 + >; + }; }; }; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - status = "okay"; -}; - -&kpp { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_kpp>; - linux,keymap = < - MATRIX_KEY(0, 0, KEY_UP) - MATRIX_KEY(0, 1, KEY_DOWN) - MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 3, KEY_HOME) - MATRIX_KEY(1, 0, KEY_RIGHT) - MATRIX_KEY(1, 1, KEY_LEFT) - MATRIX_KEY(1, 2, KEY_ENTER) - MATRIX_KEY(1, 3, KEY_VOLUMEUP) - MATRIX_KEY(2, 0, KEY_F6) - MATRIX_KEY(2, 1, KEY_F8) - MATRIX_KEY(2, 2, KEY_F9) - MATRIX_KEY(2, 3, KEY_F10) - MATRIX_KEY(3, 0, KEY_F1) - MATRIX_KEY(3, 1, KEY_F2) - MATRIX_KEY(3, 2, KEY_F3) - MATRIX_KEY(3, 3, KEY_POWER) - >; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts new file mode 100644 index 000000000000..1db517d3d497 --- /dev/null +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx51-digi-connectcore-som.dtsi" + +/ { + model = "Digi ConnectCore CC(W)-MX51 JSK"; + compatible = "digi,connectcore-ccxmx51-jsk", + "digi,connectcore-ccxmx51-som", "fsl,imx51"; + + chosen { + linux,stdout-path = &uart1; + }; +}; + +&owire { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_owire>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + phy_type = "ulpi"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + imx51-digi-connectcore-jsk { + pinctrl_owire: owiregrp { + fsl,pins = < + MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x40000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi new file mode 100644 index 000000000000..321662f53e33 --- /dev/null +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -0,0 +1,377 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx51.dtsi" + +/ { + model = "Digi ConnectCore CC(W)-MX51"; + compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51"; + + memory { + reg = <0x90000000 0x08000000>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic: mc13892@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mc13892>; + compatible = "fsl,mc13892"; + spi-max-frequency = <16000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { }; + + viohi_reg: viohi { + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + gpo1_reg: gpo1 { }; + + gpo2_reg: gpo2 { }; + + gpo3_reg: gpo3 { }; + + gpo4_reg: gpo4 { }; + + pwgt2spi_reg: pwgt2spi { + regulator-always-on; + }; + + vcoincell_reg: vcoincell { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cap-sdio-irq; + enable-sdio-wakeup; + keep-power-in-suspend; + max-frequency = <50000000>; + no-1-8-v; + non-removable; + vmmc-supply = <&gpo4_reg>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-supply = <&gpo3_reg>; + /* Pins shared with LCD2, keep status disabled */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; + + mma7455l@1d { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mma7455l>; + compatible = "fsl,mma7455l"; + reg = <0x1d>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi_wide"; + disable-over-current; + /* Device role is not known, keep status disabled */ +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + lan9221: lan9221@5,0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lan9221>; + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <5 0x00000000 0x1000>; + fsl,weim-cs-timing = < + 0x00420081 0x00000000 + 0x32260000 0x00000000 + 0x72080f00 0x00000000 + >; + clocks = <&clks IMX5_CLK_DUMMY>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,irq-push-pull; + vdd33a-supply = <&gpo2_reg>; + vddvario-supply = <&gpo2_reg>; + }; +}; + +&iomuxc { + imx51-digi-connectcore-som { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + >; + }; + + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed + MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 + MX51_PAD_NANDF_D1__NANDF_D1 0x80000000 + MX51_PAD_NANDF_D2__NANDF_D2 0x80000000 + MX51_PAD_NANDF_D3__NANDF_D3 0x80000000 + MX51_PAD_NANDF_D4__NANDF_D4 0x80000000 + MX51_PAD_NANDF_D5__NANDF_D5 0x80000000 + MX51_PAD_NANDF_D6__NANDF_D6 0x80000000 + MX51_PAD_NANDF_D7__NANDF_D7 0x80000000 + MX51_PAD_NANDF_ALE__NANDF_ALE 0x80000000 + MX51_PAD_NANDF_CLE__NANDF_CLE 0x80000000 + MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x80000000 + MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x80000000 + MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x80000000 + MX51_PAD_NANDF_CS0__NANDF_CS0 0x80000000 + MX51_PAD_NANDF_RB0__NANDF_RB0 0x80000000 + >; + }; + + pinctrl_lan9221: lan9221grp { + fsl,pins = < + MX51_PAD_GPIO1_9__GPIO1_9 0xe5 /* IRQ */ + >; + }; + + pinctrl_mc13892: mc13892grp { + fsl,pins = < + MX51_PAD_GPIO1_5__GPIO1_5 0xe5 /* IRQ */ + >; + }; + + pinctrl_mma7455l: mma7455lgrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* IRQ1 */ + MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* IRQ2 */ + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX51_PAD_EIM_DA0__EIM_DA0 0x80000000 + MX51_PAD_EIM_DA1__EIM_DA1 0x80000000 + MX51_PAD_EIM_DA2__EIM_DA2 0x80000000 + MX51_PAD_EIM_DA3__EIM_DA3 0x80000000 + MX51_PAD_EIM_DA4__EIM_DA4 0x80000000 + MX51_PAD_EIM_DA5__EIM_DA5 0x80000000 + MX51_PAD_EIM_DA6__EIM_DA6 0x80000000 + MX51_PAD_EIM_DA7__EIM_DA7 0x80000000 + MX51_PAD_EIM_DA8__EIM_DA8 0x80000000 + MX51_PAD_EIM_DA9__EIM_DA9 0x80000000 + MX51_PAD_EIM_DA10__EIM_DA10 0x80000000 + MX51_PAD_EIM_DA11__EIM_DA11 0x80000000 + MX51_PAD_EIM_DA12__EIM_DA12 0x80000000 + MX51_PAD_EIM_DA13__EIM_DA13 0x80000000 + MX51_PAD_EIM_DA14__EIM_DA14 0x80000000 + MX51_PAD_EIM_DA15__EIM_DA15 0x80000000 + MX51_PAD_EIM_A16__EIM_A16 0x80000000 + MX51_PAD_EIM_A17__EIM_A17 0x80000000 + MX51_PAD_EIM_A18__EIM_A18 0x80000000 + MX51_PAD_EIM_A19__EIM_A19 0x80000000 + MX51_PAD_EIM_A20__EIM_A20 0x80000000 + MX51_PAD_EIM_A21__EIM_A21 0x80000000 + MX51_PAD_EIM_A22__EIM_A22 0x80000000 + MX51_PAD_EIM_A23__EIM_A23 0x80000000 + MX51_PAD_EIM_A24__EIM_A24 0x80000000 + MX51_PAD_EIM_A25__EIM_A25 0x80000000 + MX51_PAD_EIM_A26__EIM_A26 0x80000000 + MX51_PAD_EIM_A27__EIM_A27 0x80000000 + MX51_PAD_EIM_D16__EIM_D16 0x80000000 + MX51_PAD_EIM_D17__EIM_D17 0x80000000 + MX51_PAD_EIM_D18__EIM_D18 0x80000000 + MX51_PAD_EIM_D19__EIM_D19 0x80000000 + MX51_PAD_EIM_D20__EIM_D20 0x80000000 + MX51_PAD_EIM_D21__EIM_D21 0x80000000 + MX51_PAD_EIM_D22__EIM_D22 0x80000000 + MX51_PAD_EIM_D23__EIM_D23 0x80000000 + MX51_PAD_EIM_D24__EIM_D24 0x80000000 + MX51_PAD_EIM_D25__EIM_D25 0x80000000 + MX51_PAD_EIM_D26__EIM_D26 0x80000000 + MX51_PAD_EIM_D27__EIM_D27 0x80000000 + MX51_PAD_EIM_D28__EIM_D28 0x80000000 + MX51_PAD_EIM_D29__EIM_D29 0x80000000 + MX51_PAD_EIM_D30__EIM_D30 0x80000000 + MX51_PAD_EIM_D31__EIM_D31 0x80000000 + MX51_PAD_EIM_OE__EIM_OE 0x80000000 + MX51_PAD_EIM_DTACK__EIM_DTACK 0x80000000 + MX51_PAD_EIM_LBA__EIM_LBA 0x80000000 + MX51_PAD_EIM_CS5__EIM_CS5 0x80000000 /* CS5 */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi index 9b3acf6e4282..63164266af83 100644 --- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi @@ -42,6 +42,17 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; + + tsc2007: tsc2007@49 { + compatible = "ti,tsc2007"; + gpios = <&gpio4 0 1>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007_1>; + reg = <0x49>; + ti,x-plate-ohms = <180>; + }; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 5cec4f322096..75e66c9c6144 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -24,6 +24,14 @@ model = "Eukrea CPUIMX51"; compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51"; + clocks { + clk24M: can_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -50,6 +58,23 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_can: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "CAN_RST"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <20000>; + enable-active-high; + }; + }; + sound { compatible = "eukrea,asoc-tlv320"; eukrea,model = "imx51-eukrea-tlv320aic23"; @@ -57,6 +82,20 @@ fsl,mux-int-port = <2>; fsl,mux-ext-port = <3>; }; + + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + }; }; &audmux { @@ -72,6 +111,26 @@ status = "okay"; }; +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk24M>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <®_can>; + }; +}; + &i2c1 { tlv320aic23: codec@1a { compatible = "ti,tlv320aic23"; @@ -90,6 +149,23 @@ >; }; + + pinctrl_can: cangrp { + fsl,pins = < + MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* nReset */ + MX51_PAD_GPIO1_1__GPIO1_1 0x80000000 /* IRQ */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x80000000 /* CS0 */ + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 @@ -151,6 +227,29 @@ MX51_PAD_CSI1_D9__GPIO3_13 0x1f5 >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX51_PAD_EIM_CS3__GPIO2_28 0x1f5 + >; + }; }; }; @@ -173,3 +272,24 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbh1phy>; + dr_mode = "host"; + phy_type = "ulpi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + phy_type = "utmi_wide"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 150bb4e2f744..bebbf3ba0d5e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -19,6 +19,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -537,6 +538,8 @@ }; nfc: nand@83fdb000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index a3431d784870..3e3f17aa93a1 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -17,6 +17,10 @@ model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; + chosen { + stdout-path = &uart2; + }; + backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ede04fa4161f..fd8c60dde7de 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -13,6 +13,10 @@ #include "imx53.dtsi" / { + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; @@ -272,6 +276,14 @@ >; }; + pinctrl_vga_sync: vgasync-grp { + fsl,pins = < + /* VGA_HSYNC, VSYNC with max drive strength */ + MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6 + MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 @@ -281,6 +293,15 @@ }; }; +&tve { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vga_sync>; + fsl,tve-mode = "vga"; + fsl,hsync-pin = <4>; + fsl,vsync-pin = <6>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 6a1bf4ff83d5..6456a0084388 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -18,6 +18,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -726,8 +727,8 @@ clocks = <&clks IMX5_CLK_VPU_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; + resets = <&src 1>; iram = <&ocram>; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5bfae54fb780..5373a5f2782b 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -11,6 +11,10 @@ model = "SolidRun HummingBoard DL/Solo"; compatible = "solidrun,hummingboard", "fsl,imx6dl"; + chosen { + stdout-path = &uart1; + }; + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio1 2 1>; @@ -67,6 +71,13 @@ status = "okay"; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_i2c1>; @@ -82,6 +93,13 @@ */ }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + &iomuxc { hummingboard { pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { @@ -97,6 +115,12 @@ >; }; + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 @@ -104,6 +128,13 @@ >; }; + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts new file mode 100644 index 000000000000..08e97801494e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl-phytec-pfla02.dtsi" +#include "imx6qdl-phytec-pbab01.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board"; + compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi new file mode 100644 index 000000000000..964bc2ad3c5d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-phytec-pfla02.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 DualLite/Solo"; + compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts new file mode 100644 index 000000000000..909fafc0b650 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -0,0 +1,539 @@ +/* + * Copyright 2014 Iain Paton <ipaton0@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "RIoTboard i.MX6S"; + compatible = "riot,imx6s-riotboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + led0: user1 { + label = "user1"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6-riotboard-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 31 0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pmic: pf0100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + interrupt-parent = <&gpio5>; + interrupts = <16 8>; + + regulators { + reg_vddcore: sw1ab { /* VDDARM_IN */ + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_vddsoc: sw1c { /* VDDSOC_IN */ + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_gen_3v3: sw2 { /* VDDHIGH_IN */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_ddr_1v5a: sw3a { /* NVCC_DRAM, NVCC_RGMII */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_1v5b: sw3b { /* NVCC_DRAM, NVCC_RGMII */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_vtt: sw4 { /* MIPI conn */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_5v_600mA: swbst { /* not used */ + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + reg_snvs_3v: vsnvs { /* VDD_SNVS_IN */ + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { /* VREF_DDR */ + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1_1v5: vgen1 { /* not used */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen2_1v2_eth: vgen2 { /* pcie ? */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + reg_vgen3_2v8: vgen3 { /* not used */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + reg_vgen4_1v8: vgen4 { /* NVCC_SD3 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5_2v5_sgtl: vgen5 { /* Pwr LED & 5V0_delayed enable */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6_3v3: vgen6 { /* #V#_DELAYED enable, MIPI */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clocks = <&clks 116>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 0>; + wp-gpios = <&gpio7 1 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx6-riotboard { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */ + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */ + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 5c5f574330f9..0a9c49d69d41 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -84,9 +84,10 @@ i2c4: i2c@021f8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021f8000 0x4000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 116>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index e4ae38fd0269..e0302636aff5 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -18,6 +18,10 @@ model = "Data Modul eDM-QMX6 Board"; compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; + chosen { + stdout-path = &uart2; + }; + aliases { gpio7 = &stmpe_gpio1; gpio8 = &stmpe_gpio2; @@ -91,6 +95,20 @@ }; }; +&ecspi5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio1 12 0>; + status = "okay"; + + flash: m25p80@0 { + compatible = "m25p80"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -105,7 +123,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 &pinctrl_stmpe1 - &pinctrl_stmpe2>; + &pinctrl_stmpe2 + &pinctrl_pfuze>; status = "okay"; pmic: pfuze100@08 { @@ -216,6 +235,8 @@ reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; + vcc-supply = <&sw2_reg>; + vio-supply = <&sw2_reg>; stmpe_gpio1: stmpe_gpio { #gpio-cells = <2>; @@ -228,6 +249,8 @@ reg = <0x44>; interrupts = <2 0>; interrupt-parent = <&gpio5>; + vcc-supply = <&sw2_reg>; + vio-supply = <&sw2_reg>; stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; @@ -263,6 +286,15 @@ >; }; + pinctrl_ecspi5: ecspi5rp-1 { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -291,6 +323,12 @@ >; }; + pinctrl_pfuze: pfuze100grp1 { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 + >; + }; + pinctrl_stmpe1: stmpe1grp { fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 4a9b4dc9afc0..703539cf36d3 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -14,7 +14,7 @@ compatible = "zealz,imx6q-gk802", "fsl,imx6q"; chosen { - linux,stdout-path = &uart4; + stdout-path = &uart4; }; memory { @@ -48,6 +48,11 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + /* Internal I2C */ &i2c2 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index e51bb3f0fd56..3689eaa58826 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -157,6 +157,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts index 5607c331fca8..c139ac0ebe15 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -11,40 +11,17 @@ /dts-v1/; #include "imx6q-phytec-pfla02.dtsi" +#include "imx6qdl-phytec-pbab01.dtsi" / { model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board"; compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q"; -}; - -&fec { - status = "okay"; -}; -&gpmi { - status = "okay"; + chosen { + stdout-path = &uart4; + }; }; &sata { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usbotg { - status = "okay"; -}; - -&usdhc2 { - status = "okay"; -}; - -&usdhc3 { - status = "okay"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index 324f1550976b..cd20d0a948de 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -10,316 +10,13 @@ */ #include "imx6q.dtsi" +#include "imx6qdl-phytec-pfla02.dtsi" / { - model = "Phytec phyFLEX-i.MX6 Ouad"; + model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory { reg = <0x10000000 0x80000000>; }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 15 0>; - }; - - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 0>; - }; - }; -}; - -&ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - status = "okay"; - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio4 24 0>; - - flash@0 { - compatible = "m25p80"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c32"; - reg = <0x50>; - }; - - pmic@58 { - compatible = "dialog,da9063"; - reg = <0x58>; - interrupt-parent = <&gpio4>; - interrupts = <17 0x8>; /* active-low GPIO4_17 */ - - regulators { - vddcore_reg: bcore1 { - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1380000>; - regulator-always-on; - }; - - vddsoc_reg: bcore2 { - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1380000>; - regulator-always-on; - }; - - vdd_ddr3_reg: bpro { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - vdd_3v3_reg: bperi { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_buckmem_reg: bmem { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_eth_reg: bio { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vdd_eth_io_reg: ldo4 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - vdd_mx6_snvs_reg: ldo5 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - vdd_3v3_pmic_io_reg: ldo6 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sd0_reg: ldo9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_sd1_reg: ldo10 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_mx6_high_reg: ldo11 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - }; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - imx6q-phytec-pfla02 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - >; - }; - - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3_cdwp: usdhc3cdwp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - >; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; - status = "disabled"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; - status = "disabled"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "disabled"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - status = "disabled"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "disabled"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; - status = "disabled"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3 - &pinctrl_usdhc3_cdwp>; - cd-gpios = <&gpio1 27 0>; - wp-gpios = <&gpio1 29 0>; - status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts index ed397d149ab6..6c561060bf5c 100644 --- a/arch/arm/boot/dts/imx6q-udoo.dts +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -16,6 +16,10 @@ model = "Udoo i.MX6 Quad Board"; compatible = "udoo,imx6q-udoo", "fsl,imx6q"; + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -28,6 +32,18 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + &iomuxc { imx6q-udoo { pinctrl_enet: enetgrp { @@ -51,6 +67,13 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index c2a24888a276..25da82a03110 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -55,6 +55,20 @@ }; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_i2c2>; + status = "okay"; +}; + &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_i2c3>; @@ -69,6 +83,19 @@ &iomuxc { cubox_i { + pinctrl_cubox_i_hdmi: cubox-i-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_cubox_i_i2c2: cubox-i-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_cubox_i_i2c3: cubox-i-i2c3 { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 25cf035dd36e..2c253d6d20bd 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -22,7 +22,7 @@ }; chosen { - linux,stdout-path = &uart1; + stdout-path = &uart1; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 98a422153ce7..31665adcbf39 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -101,6 +101,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 035d3a85c318..367af3ec9435 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -27,6 +27,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -148,6 +155,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -394,6 +406,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -436,6 +454,27 @@ &ldb { status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; }; &pcie { @@ -443,6 +482,12 @@ status = "okay"; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c8e5ae06deaf..c91b5a6c769b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -30,6 +30,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -157,6 +164,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -434,6 +446,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -508,6 +526,12 @@ }; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 2795dfc8c926..698d3063b295 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -30,6 +30,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -147,6 +154,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -456,6 +468,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -530,6 +548,12 @@ }; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 99be301b5232..4c4b17596c8b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi new file mode 100644 index 000000000000..584721264121 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -0,0 +1,102 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + chosen { + linux,stdout-path = &uart4; + }; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + tlv320@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + }; + + stmpe@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + }; + + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + + adc@64 { + compatible = "maxim,max1037"; + reg = <0x64>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi new file mode 100644 index 000000000000..faa3494a69d4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -0,0 +1,356 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Phytec phyFLEX-i.MX6 Ouad"; + compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 0>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 0>; + }; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + green { + label = "phyflex:green"; + gpios = <&gpio1 30 0>; + }; + + red { + label = "phyflex:red"; + gpios = <&gpio2 31 0>; + }; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 0>; + + flash@0 { + compatible = "m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + pmic@58 { + compatible = "dialog,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio4>; + interrupts = <17 0x8>; /* active-low GPIO4_17 */ + + regulators { + vddcore_reg: bcore1 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vddsoc_reg: bcore2 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vdd_ddr3_reg: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_buckmem_reg: bmem { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_eth_reg: bio { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_eth_io_reg: ldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_mx6_snvs_reg: ldo5 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_3v3_pmic_io_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sd0_reg: ldo9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_sd1_reg: ldo10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_mx6_high_reg: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6q-phytec-pfla02 { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3_cdwp: usdhc3cdwp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "disabled"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "disabled"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 + &pinctrl_usdhc3_cdwp>; + cd-gpios = <&gpio1 27 0>; + wp-gpios = <&gpio1 29 0>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 3bec128c7971..6df6127bf835 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -13,6 +13,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0d816d3be4b6..40ea36534643 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -105,6 +109,17 @@ default-brightness-level = <7>; status = "okay"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + red { + gpios = <&gpio1 2 0>; + default-state = "on"; + }; + }; }; &audmux { @@ -137,6 +152,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -373,6 +393,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -421,6 +447,29 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; }; }; @@ -449,6 +498,13 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 0>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -496,3 +552,12 @@ wp-gpios = <&gpio2 1 0>; status = "okay"; }; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index bdfdf89d405f..5c6f10c43f65 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -62,6 +62,18 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c1>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -127,6 +139,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index eca0971d4db1..ce0599134a69 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -16,6 +16,7 @@ / { aliases { + ethernet0 = &fec; can0 = &can1; can1 = &can2; gpio0 = &gpio1; @@ -140,15 +141,16 @@ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; - clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; + clocks = <&clks 144>, <&clks 206>, <&clks 189>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index d26b099260a3..2d4e5285f3f3 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -14,6 +14,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index 74b3b63e94cf..c568f067604d 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -58,3 +58,84 @@ &usb1 { status = "okay"; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&aemif { + cs0 { + #address-cells = <2>; + #size-cells = <1>; + clock-ranges; + ranges; + + ti,cs-chipselect = <0>; + /* all timings in nanoseconds */ + ti,cs-min-turnaround-ns = <12>; + ti,cs-read-hold-ns = <6>; + ti,cs-read-strobe-ns = <23>; + ti,cs-read-setup-ns = <9>; + ti,cs-write-hold-ns = <8>; + ti,cs-write-strobe-ns = <23>; + ti,cs-write-setup-ns = <8>; + + nand@0,0 { + compatible = "ti,keystone-nand","ti,davinci-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x4000000 + 1 0 0x0000100>; + + ti,davinci-chipselect = <0>; + ti,davinci-mask-ale = <0x2000>; + ti,davinci-mask-cle = <0x4000>; + ti,davinci-mask-chipsel = <0>; + nand-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "params"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "ubifs"; + reg = <0x180000 0x1FE80000>; + }; + }; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index c93d06f9f2a8..1f90cbf27fd7 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -138,3 +138,32 @@ }; }; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index 50a70132ac9e..fec43128a2e0 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -35,3 +35,84 @@ &usb { status = "okay"; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&aemif { + cs0 { + #address-cells = <2>; + #size-cells = <1>; + clock-ranges; + ranges; + + ti,cs-chipselect = <0>; + /* all timings in nanoseconds */ + ti,cs-min-turnaround-ns = <12>; + ti,cs-read-hold-ns = <6>; + ti,cs-read-strobe-ns = <23>; + ti,cs-read-setup-ns = <9>; + ti,cs-write-hold-ns = <8>; + ti,cs-write-strobe-ns = <23>; + ti,cs-write-setup-ns = <8>; + + nand@0,0 { + compatible = "ti,keystone-nand","ti,davinci-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x4000000 + 1 0 0x0000100>; + + ti,davinci-chipselect = <0>; + ti,davinci-mask-ale = <0x2000>; + ti,davinci-mask-cle = <0x4000>; + ti,davinci-mask-chipsel = <0>; + nand-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "params"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "ubifs"; + reg = <0x180000 0x7FE80000>; + }; + }; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 90823eb90c1b..c1414cb81fd4 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -28,8 +28,6 @@ gic: interrupt-controller { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, @@ -66,10 +64,23 @@ compatible = "ti,keystone","simple-bus"; interrupt-parent = <&gic>; ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + + pllctrl: pll-controller@02310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; + }; + + devctrl: device-state-control@02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; + }; rstctrl: reset-controller { compatible = "ti,keystone-reset"; - reg = <0x023100e8 4>; /* pll reset control reg */ + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>; }; /include/ "keystone-clocks.dtsi" @@ -102,11 +113,6 @@ interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; - - dtt@50 { - compatible = "at,24c1024"; - reg = <0x50>; - }; }; i2c1: i2c@2530400 { @@ -115,6 +121,8 @@ clock-frequency = <100000>; clocks = <&clki2c>; interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@2530800 { @@ -123,6 +131,8 @@ clock-frequency = <100000>; clocks = <&clki2c>; interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; }; spi0: spi@21000400 { @@ -132,6 +142,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; spi1: spi@21000600 { @@ -141,6 +153,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; spi2: spi@21000800 { @@ -150,6 +164,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; usb_phy: usb_phy@2620738 { @@ -169,6 +185,8 @@ clock-names = "usb"; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; ranges; + dma-coherent; + dma-ranges; status = "disabled"; dwc3@2690000 { diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 3916937d6818..dd81508b919b 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -15,7 +15,7 @@ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -35,16 +35,9 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6192-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; @@ -53,22 +46,6 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -76,14 +53,14 @@ }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -92,7 +69,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 416d96e1302f..7dc7d6782e83 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -15,7 +15,7 @@ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -35,16 +35,9 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6281-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; @@ -53,22 +46,6 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -76,14 +53,14 @@ }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -94,7 +71,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 2902e0d7971d..4680eec990f0 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -19,7 +19,7 @@ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -36,7 +36,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie1: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -56,15 +56,8 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6282-pinctrl"; - reg = <0x10000 0x20>; - - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; @@ -74,29 +67,16 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; + /* + * Default I2C1 pinctrl setting on mpp36/mpp37, + * overwrite marvell,pins on board level if required. + */ pmx_twsi1: pmx-twsi1 { marvell,pins = "mpp36", "mpp37"; marvell,function = "twsi1"; }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -104,20 +84,20 @@ }; }; - thermal@10078 { + thermal: thermal@10078 { compatible = "marvell,kirkwood-thermal"; reg = <0x10078 0x4>; status = "okay"; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - i2c@11100 { + i2c1: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; @@ -125,10 +105,12 @@ interrupts = <32>; clock-frequency = <100000>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_twsi1>; + pinctrl-names = "default"; status = "disabled"; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -139,7 +121,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 3271e4c8ea07..9e1f741d74ff 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -1,31 +1,51 @@ / { + mbus { + pciec: pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie0: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; + }; + ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,98dx4122-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; }; }; }; + +&sata_phy0 { + status = "disabled"; +}; + +&sata_phy1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index 6becedebaa4e..c9247f8672ae 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -30,6 +30,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -44,7 +45,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp39"; marvell,function = "gpio"; @@ -69,8 +70,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p16@0 { #address-cells = <1>; @@ -113,8 +112,6 @@ * UART0_TX = Testpoint 66 * See the Excito Wiki for more details. */ - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 3b62aeeaa3a2..ab6ab4933e6b 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_cloudbox_sata0: pmx-cloudbox-sata0 { marvell,pins = "mpp15"; marvell,function = "sata0"; @@ -25,9 +26,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <166666667>; status = "okay"; }; @@ -39,8 +37,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index 02d1225ef99f..812df691ae3d 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -22,10 +22,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl@10000 { + pin-controller@10000 { pmx_sdio_gpios: pmx-sdio-gpios { marvell,pins = "mpp37", "mpp38"; marvell,function = "gpio"; @@ -33,10 +34,7 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <200000000>; - status = "ok"; + status = "okay"; }; sata@80000 { @@ -59,8 +57,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; chip-delay = <25>; status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index bf7fe8ab88f4..d85ef0a91b50 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -13,6 +13,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; gpio-leds { @@ -51,8 +52,6 @@ }; serial@12100 { - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index cb9978c652f2..5e586ed04c58 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -13,6 +13,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index d5aa9564a287..113dcf056dcf 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -50,7 +50,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0 &pmx_present_sata1 &pmx_fan_tacho @@ -183,8 +183,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; chip-delay = <35>; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index f31312ebd0d6..849736349511 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 28b3ee369778..6467c7924195 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_bluetooth: pmx-led-bluetooth { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -37,8 +38,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p40@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts index 772092c94ca3..d4bcc1c7f6b3 100644 --- a/arch/arm/boot/dts/kirkwood-ds109.dts +++ b/arch/arm/boot/dts/kirkwood-ds109.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts index aabafbe0da4c..95bf83b91b4a 100644 --- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts +++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts index 16ec7fbab573..61f47fbe44d0 100644 --- a/arch/arm/boot/dts/kirkwood-ds111.dts +++ b/arch/arm/boot/dts/kirkwood-ds111.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index cff1b2388765..bf4143c6cb8f 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts index 330411993d38..6d25093a9ac4 100644 --- a/arch/arm/boot/dts/kirkwood-ds209.dts +++ b/arch/arm/boot/dts/kirkwood-ds209.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts index 6052eaa37d4f..2f1933efcac1 100644 --- a/arch/arm/boot/dts/kirkwood-ds210.dts +++ b/arch/arm/boot/dts/kirkwood-ds210.dts @@ -26,6 +26,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts index 7f76cd30e84e..99afd462f956 100644 --- a/arch/arm/boot/dts/kirkwood-ds212.dts +++ b/arch/arm/boot/dts/kirkwood-ds212.dts @@ -27,6 +27,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts index 1f83a00f1f74..f5c4213fc67c 100644 --- a/arch/arm/boot/dts/kirkwood-ds212j.dts +++ b/arch/arm/boot/dts/kirkwood-ds212j.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts index 0a573add44a2..e80a962ebba0 100644 --- a/arch/arm/boot/dts/kirkwood-ds409.dts +++ b/arch/arm/boot/dts/kirkwood-ds409.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts index 1848a6245fd3..cae5af4b88b5 100644 --- a/arch/arm/boot/dts/kirkwood-ds409slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts index a1737b4311c6..623cd4a37d71 100644 --- a/arch/arm/boot/dts/kirkwood-ds411.dts +++ b/arch/arm/boot/dts/kirkwood-ds411.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts index 0cde914eceae..3348e330f074 100644 --- a/arch/arm/boot/dts/kirkwood-ds411j.dts +++ b/arch/arm/boot/dts/kirkwood-ds411j.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts index aef0cadc2c78..a0a1fad8b4de 100644 --- a/arch/arm/boot/dts/kirkwood-ds411slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index eb9329420107..aa60a0b049a7 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 2d51fce74a5a..c5a1fc75c7a3 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_health_r: pmx-led-health-r { marvell,pins = "mpp46"; marvell,function = "gpio"; @@ -36,7 +37,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; @@ -101,13 +101,19 @@ status = "okay"; ethphy0: ethernet-phy@0 { - compatible = "marvell,88e1121"; + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; reg = <0>; + phy-connection-type = "rgmii-id"; }; ethphy1: ethernet-phy@1 { - compatible = "marvell,88e1121"; + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; reg = <1>; + phy-connection-type = "rgmii-id"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index a1add3f215e3..bfa5edde179c 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_os_red: pmx-led-os-red { marvell,pins = "mpp22"; marvell,function = "gpio"; @@ -104,8 +105,6 @@ &nand { status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 8d8c80e3656d..38e31d15a62d 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -14,6 +14,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; linux,initrd-start = <0x4500040>; linux,initrd-end = <0x4800000>; }; @@ -29,7 +30,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_reset: pmx-button-reset { marvell,pins = "mpp12"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 59e7a5adeedb..05291f3990d0 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = < &pmx_led_sata_brt_ctrl_1 &pmx_led_sata_brt_ctrl_2 &pmx_led_backup_brt_ctrl_1 diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi new file mode 100644 index 000000000000..8367c772c764 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi @@ -0,0 +1,48 @@ +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; + pinctrl-names = "default"; + + pmx_i2c_gpio_sda: pmx-gpio-sda { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_i2c_gpio_scl: pmx-gpio-scl { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ + &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; +}; + +&nand { + status = "okay"; + chip-delay = <25>; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts new file mode 100644 index 000000000000..9895f2b10f8a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts @@ -0,0 +1,23 @@ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-98dx4122.dtsi" +#include "kirkwood-km_common.dtsi" + +/ { + model = "Keymile Kirkwood Fixed Eth"; + compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + speed = <1000>; /* <SPEED_1000> */ + duplex = <1>; /* <DUPLEX_FULL> */ + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 04a1e44541b3..235bf382fff9 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -2,6 +2,7 @@ #include "kirkwood.dtsi" #include "kirkwood-98dx4122.dtsi" +#include "kirkwood-km_common.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -11,44 +12,6 @@ device_type = "memory"; reg = <0x00000000 0x08000000>; }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; - - ocp@f1000000 { - pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; - pinctrl-names = "default"; - - pmx_i2c_gpio_sda: pmx-gpio-sda { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_i2c_gpio_scl: pmx-gpio-scl { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - }; - - i2c@0 { - compatible = "i2c-gpio"; - gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ - &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - }; -}; - -&nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "ok"; - chip-delay = <25>; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index 6761ffa2c4ab..24425660e973 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -37,14 +38,10 @@ ocp@f1000000 { serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; i2c@11000 { - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; status = "okay"; eeprom@50 { @@ -54,7 +51,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp14"; marvell,function = "gpio"; @@ -139,7 +136,6 @@ &nand { /* Total size : 512MB */ status = "okay"; - pinctrl-0 = <&pmx_nand>; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 1656653d339b..53484474df1f 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -4,10 +4,11 @@ / { chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 73722c067501..f3a991837515 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -12,9 +12,10 @@ reg = <0x00000000 0x20000000>; }; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; mbus { pcie-controller { @@ -27,7 +28,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_health: pmx-led-health { marvell,pins = "mpp7"; marvell,function = "gpo"; @@ -89,11 +90,9 @@ }; - serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - }; + serial@12000 { + status = "okay"; + }; rtc@10300 { status = "disabled"; @@ -163,8 +162,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; partition@0 { diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index b939f4f52d16..8f76d28759a3 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -28,6 +28,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -41,7 +42,7 @@ }; ocp@f1000000 { - pinctrl@10000 { + pin-controller@10000 { pmx_usb_led: pmx-usb-led { marvell,pins = "mpp12"; marvell,function = "gpo"; @@ -59,8 +60,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -74,10 +73,7 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <200000000>; - status = "ok"; + status = "okay"; }; ehci@50000 { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 4838478019cc..fd733c63bc27 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -38,7 +39,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -112,8 +113,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index 7c8a0d9d8d1f..b514d643fb6c 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -40,7 +41,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -119,8 +120,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e6e5ec4fe6b9..fe6c0246db1a 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -4,10 +4,11 @@ / { chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_ns2_sata0: pmx-ns2-sata0 { marvell,pins = "mpp21"; marvell,function = "sata0"; @@ -19,14 +20,10 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -45,8 +42,6 @@ }; i2c@11000 { - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; status = "okay"; eeprom@50 { diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 0a07af9d8e58..6139df0f376c 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,6 +1,6 @@ /dts-v1/; -#include "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa3x0-common.dtsi" / { compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; @@ -12,6 +12,7 @@ chosen { bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; }; mbus { @@ -25,7 +26,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_unknown>; pinctrl-names = "default"; @@ -59,26 +60,6 @@ marvell,function = "gpio"; }; - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_hdd_green: pmx-led-hdd-green { marvell,pins = "mpp41"; marvell,function = "gpio"; @@ -94,10 +75,6 @@ marvell,function = "gpio"; }; - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; }; i2c@11000 { @@ -110,30 +87,6 @@ }; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; - pinctrl-names = "default"; - - button@1 { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index 27ca6a79c48a..3d2b3d494c19 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -1,6 +1,6 @@ /dts-v1/; -#include "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa3x0-common.dtsi" /* * There are at least two different NSA310 designs. This variant does @@ -17,10 +17,11 @@ chosen { bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-names = "default"; pmx_led_esata_green: pmx-led-esata-green { @@ -38,11 +39,6 @@ marvell,function = "gpio"; }; - pmx_usb_power_off: pmx-usb-power-off { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - pmx_led_sys_green: pmx-led-sys-green { marvell,pins = "mpp28"; marvell,function = "gpio"; @@ -53,26 +49,6 @@ marvell,function = "gpio"; }; - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_hdd_green: pmx-led-hdd-green { marvell,pins = "mpp41"; marvell,function = "gpio"; @@ -83,11 +59,6 @@ marvell,function = "gpio"; }; - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - }; i2c@11000 { @@ -100,28 +71,6 @@ }; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - gpio-leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts new file mode 100644 index 000000000000..24f686d1044d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -0,0 +1,215 @@ +/* Device tree file for the Zyxel NSA 320 NAS box. + * + * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based upon the board setup file created by Peter Schildmann */ + +/dts-v1/; + +#include "kirkwood-nsa3x0-common.dtsi" + +/ { + model = "Zyxel NSA320"; + compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-names = "default"; + + /* SATA Activity and Present pins are not connected */ + pmx_sata0: pmx-sata0 { + marvell,pins ; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins ; + marvell,function = "sata1"; + }; + + pmx_led_hdd2_green: pmx-led-hdd2-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_hdd2_red: pmx-led-hdd2-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_mcu_data: pmx-mcu-data { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_mcu_clk: pmx-mcu-clk { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_mcu_act: pmx-mcu-act { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_orange: pmx-led-sys-orange { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_green: pmx-led-hdd1-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_red: pmx-led-hdd1-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_htp: pmx-htp { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + /* Buzzer needs to be switched at around 1kHz so is + not compatible with the gpio-beeper driver. */ + pmx_buzzer: pmx-buzzer { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_vid_b1: pmx-vid-b1 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_power_resume_data: pmx-power-resume-data { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_power_resume_clk: pmx-power-resume-clk { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + regulators { + usb0_power: regulator@1 { + enable-active-high; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red + &pmx_led_usb_green + &pmx_led_sys_green &pmx_led_sys_orange + &pmx_led_copy_green &pmx_led_copy_red + &pmx_led_hdd1_green &pmx_led_hdd1_red>; + pinctrl-names = "default"; + + green-sys { + label = "nsa320:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + orange-sys { + label = "nsa320:orange:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + green-hdd1 { + label = "nsa320:green:hdd1"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + red-hdd1 { + label = "nsa320:red:hdd1"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + green-hdd2 { + label = "nsa320:green:hdd2"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + red-hdd2 { + label = "nsa320:red:hdd2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + green-usb { + label = "nsa320:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + green-copy { + label = "nsa320:green:copy"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + red-copy { + label = "nsa320:red:copy"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + }; + + /* The following pins are currently not assigned to a driver, + some of them should be configured as inputs. + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act + &pmx_htp &pmx_vid_b1 + &pmx_power_resume_data &pmx_power_resume_clk>; */ +}; + +&mdio { + status = "okay"; + ethphy0: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index e2cc85cc3b87..2075a2e828f1 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -15,17 +15,42 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { - pmx_usb_power_off: pmx-usb-power-off { + pmx_usb_power: pmx-usb-power { marvell,pins = "mpp21"; marvell,function = "gpio"; }; + pmx_pwr_off: pmx-pwr-off { marvell,pins = "mpp48"; marvell,function = "gpio"; }; + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; }; serial@12000 { @@ -45,17 +70,42 @@ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; + pinctrl-names = "default"; + + button@1 { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + button@2 { + label = "Copy Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + button@3 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_off>; + pinctrl-0 = <&pmx_usb_power>; pinctrl-names = "default"; - usb0_power_off: regulator@1 { + usb0_power: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "USB Power Off"; + regulator-name = "USB Power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 0650beafc1de..fb9dc227255d 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -14,19 +14,16 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; serial@12100 { - status = "ok"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -36,8 +33,6 @@ i2c@11100 { status = "okay"; - pinctrl-0 = <&pmx_twsi1>; - pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "sii,s35390a"; @@ -45,7 +40,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; pinctrl-names = "default"; @@ -133,8 +128,6 @@ &nand { chip-delay = <25>; status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "uboot"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index 38520a287514..d5e3bc518968 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -26,19 +26,16 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; serial@12100 { - status = "ok"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -48,8 +45,6 @@ i2c@11100 { status = "okay"; - pinctrl-0 = <&pmx_twsi1>; - pinctrl-names = "default"; s24c02: s24c02@50 { compatible = "atmel,24c02"; @@ -57,7 +52,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; pinctrl-names = "default"; @@ -109,13 +104,6 @@ marvell,pins = "mpp41", "mpp42", "mpp43"; marvell,function = "gpio"; }; - - pmx_ge1: pmx-ge1 { - marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", - "mpp24", "mpp25", "mpp26", "mpp27", - "mpp30", "mpp31", "mpp32", "mpp33"; - marvell,function = "ge1"; - }; }; }; @@ -158,8 +146,6 @@ &nand { chip-delay = <25>; status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "uboot"; @@ -213,8 +199,6 @@ ð1 { status = "okay"; - pinctrl-0 = <&pmx_ge1>; - pinctrl-names = "default"; ethernet1-port@0 { phy-handle = <ðphy1>; }; diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/kirkwood-openrd-base.dts new file mode 100644 index 000000000000..8af58999606d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-base.dts @@ -0,0 +1,42 @@ +/* + * Marvell OpenRD Base Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * base variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Base"; + compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + serial@12100 { + status = "okay"; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts new file mode 100644 index 000000000000..887b9c1fee43 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts @@ -0,0 +1,73 @@ +/* + * Marvell OpenRD Client Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * client variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Client"; + compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&audio0>; + }; + + simple-audio-card,codec { + sound-dai = <&cs42l51>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; + ethphy1: ethernet-phy@24 { + reg = <24>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts new file mode 100644 index 000000000000..9f12f8b53e24 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts @@ -0,0 +1,58 @@ +/* + * Marvell OpenRD Ultimate Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * ultimate variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Ultimate"; + compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi new file mode 100644 index 000000000000..d3330dadf7ed --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -0,0 +1,90 @@ +/* + * Marvell OpenRD (Base|Client|Ultimate) Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common between the three + * variants of the Marvell Kirkwood Development Board. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; + pinctrl-names = "default"; + + pmx_select28: pmx-select-uart-sd { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_select34: pmx-select-rs232-rs484 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + status = "okay"; + + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + mvsdio@90000 { + status = "okay"; + cd-gpios = <&gpio0 29 9>; + }; + }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@600000 { + label = "root"; + reg = <0x0600000 0x1FA00000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index e9dd85049297..35a29dee8dd8 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -26,6 +26,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -39,7 +40,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_usb_power>; pinctrl-names = "default"; @@ -56,8 +57,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p128@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index d6368c39102e..26cf0e0ccefd 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -22,6 +22,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -35,7 +36,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_sdio_cd>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts index 93ec3d00c6ab..3b19f1fd4cac 100644 --- a/arch/arm/boot/dts/kirkwood-rs212.dts +++ b/arch/arm/boot/dts/kirkwood-rs212.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-3 { diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts index 311df4e5aa28..921ca49e85a4 100644 --- a/arch/arm/boot/dts/kirkwood-rs409.dts +++ b/arch/arm/boot/dts/kirkwood-rs409.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts index f90da850bb31..02852b0c809f 100644 --- a/arch/arm/boot/dts/kirkwood-rs411.dts +++ b/arch/arm/boot/dts/kirkwood-rs411.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-3 { diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 1ff848d570a9..7196c7f3e109 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -17,10 +17,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; @@ -44,8 +45,6 @@ }; }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; }; @@ -72,8 +71,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; partition@0 { diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 4227c974729d..811e0971fc58 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -25,7 +25,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_alarmled_12: pmx-alarmled-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; @@ -213,8 +213,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p80@0 { #address-cells = <1>; @@ -259,8 +257,6 @@ i2c@11000 { status = "okay"; clock-frequency = <400000>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; rs5c372: rs5c372@32 { status = "disabled"; @@ -277,14 +273,10 @@ serial@12000 { status = "okay"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; }; serial@12100 { status = "okay"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; }; poweroff@12100 { diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 0bd70d928c69..610ec0f95858 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -27,6 +27,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -40,7 +41,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_i2s &pmx_sysrst>; pinctrl-names = "default"; @@ -64,10 +65,6 @@ marvell,function = "gpio"; }; - /* - * Redefined from kirkwood-6281.dtsi, because - * we don't use SPI CS on MPP0, but on MPP7. - */ pmx_spi: pmx-spi { marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7"; marvell,function = "spi"; @@ -86,8 +83,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -127,6 +122,14 @@ i2c@11000 { status = "okay"; + + alc5621: alc5621@1a { + compatible = "realtek,alc5621"; + reg = <0x1a>; + #sound-dai-cells = <0>; + add-ctrl = <0x3700>; + jack-det-ctrl = <0x4810>; + }; }; serial@12000 { @@ -184,6 +187,31 @@ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Speaker", "SPKOUT", + "Speaker", "SPKOUTN", + "MIC1", "Mic Jack", + "MIC2", "Mic Jack"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speaker", "Speaker", + "Microphone", "Mic Jack"; + + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&audio>; + }; + + simple-audio-card,codec { + sound-dai = <&alc5621>; + }; + }; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 5fc817c2cb87..f5c8c0dd41dc 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { /* * Switch positions * @@ -85,9 +86,7 @@ }; serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -96,9 +95,7 @@ }; i2c@11000 { - status = "ok"; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; + status = "okay"; }; mvsdio@90000 { @@ -175,8 +172,6 @@ &nand { status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index c17ae45e19be..9767d73f3857 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -6,7 +6,7 @@ / { ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 0713d072758a..bfc1a32d4e42 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -16,7 +16,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 911f3a8cee23..df7f15276575 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -9,6 +9,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -25,8 +26,6 @@ i2c@11000 { status = "okay"; clock-frequency = <400000>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "s35390a"; @@ -34,16 +33,10 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; }; serial@12100 { - clock-frequency = <200000000>; status = "okay"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; }; poweroff@12100 { compatible = "qnap,power-off"; @@ -52,8 +45,6 @@ }; spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p128@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi index 1a9c624c7a92..30ab93bfb1e4 100644 --- a/arch/arm/boot/dts/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi @@ -14,7 +14,7 @@ compatible = "qnap,ts419", "marvell,kirkwood"; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-names = "default"; pmx_USB_copy_button: pmx-USB-copy-button { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 90384587c278..afc640cd80c5 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -40,7 +40,7 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - crypto@0301 { + cesa: crypto@0301 { compatible = "marvell,orion-crypto"; reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, <MBUS_ID(0x03, 0x01) 0 0x800>; @@ -61,6 +61,8 @@ chip-delay = <25>; /* set partition map and/or chip-delay in board dts */ clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "disabled"; }; }; @@ -71,13 +73,59 @@ #address-cells = <1>; #size-cells = <1>; + pinctrl: pin-controller@10000 { + /* set compatible property in SoC file */ + reg = <0x10000 0x20>; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", + "mpp24", "mpp25", "mpp26", "mpp27", + "mpp30", "mpp31", "mpp32", "mpp33"; + marvell,function = "ge1"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", "mpp19"; + marvell,function = "nand"; + }; + + /* + * Default SPI0 pinctrl setting with CSn on mpp0, + * overwrite marvell,pins on board level if required. + */ + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + + /* + * Default UART pinctrl setting without RTS/CTS, + * overwrite marvell,pins on board level if required. + */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; #clock-cells = <1>; }; - spi@10600 { + spi0: spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -85,6 +133,8 @@ interrupts = <23>; reg = <0x10600 0x28>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; status = "disabled"; }; @@ -120,24 +170,30 @@ interrupts = <29>; clock-frequency = <100000>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "ns16550a"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; status = "disabled"; }; @@ -146,7 +202,7 @@ reg = <0x20000 0x80>, <0x1500 0x20>; }; - system-controller@20000 { + sysc: system-controller@20000 { compatible = "marvell,orion-system-controller"; reg = <0x20000 0x120>; }; @@ -196,7 +252,7 @@ status = "okay"; }; - ehci@50000 { + usb0: ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; interrupts = <19>; @@ -204,7 +260,7 @@ status = "okay"; }; - xor@60800 { + dma0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; @@ -224,7 +280,7 @@ }; }; - xor@60900 { + dma1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60B00 0x100>; @@ -282,6 +338,8 @@ reg = <0x76000 0x4000>; clocks = <&gate_clk 19>; marvell,tx-checksum-limit = <1600>; + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; status = "disabled"; ethernet1-port@0 { @@ -314,6 +372,7 @@ audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; + #sound-dai-cells = <0>; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>; diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi index 0c9647d28765..fb354225740a 100644 --- a/arch/arm/boot/dts/marco.dtsi +++ b/arch/arm/boot/dts/marco.dtsi @@ -36,7 +36,7 @@ ranges = <0x40000000 0x40000000 0xa0000000>; l2-cache-controller@c0030000 { - compatible = "sirf,marco-pl310-cache", "arm,pl310-cache"; + compatible = "arm,pl310-cache"; reg = <0xc0030000 0x1000>; interrupts = <0 59 0>; arm,tag-latency = <1 1 1>; diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi new file mode 100644 index 000000000000..ce8c742d7e92 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-clocks.dtsi @@ -0,0 +1,270 @@ +/* + * Device Tree Source for OMAP2420 clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&prcm_clocks { + sys_clkout2_src_gate: sys_clkout2_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <15>; + reg = <0x0070>; + }; + + sys_clkout2_src_mux: sys_clkout2_src_mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>; + ti,bit-shift = <8>; + reg = <0x0070>; + }; + + sys_clkout2_src: sys_clkout2_src { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>; + }; + + sys_clkout2: sys_clkout2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkout2_src>; + ti,bit-shift = <11>; + ti,max-div = <64>; + reg = <0x0070>; + ti,index-power-of-two; + }; + + dsp_gate_ick: dsp_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <1>; + reg = <0x0810>; + }; + + dsp_div_ick: dsp_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0840>; + ti,index-starts-at-one; + }; + + dsp_ick: dsp_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dsp_gate_ick>, <&dsp_div_ick>; + }; + + iva1_gate_ifck: iva1_gate_ifck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <10>; + reg = <0x0800>; + }; + + iva1_div_ifck: iva1_div_ifck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + ti,bit-shift = <8>; + reg = <0x0840>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>; + }; + + iva1_ifck: iva1_ifck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>; + }; + + iva1_ifck_div: iva1_ifck_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&iva1_ifck>; + clock-mult = <1>; + clock-div = <2>; + }; + + iva1_mpu_int_ifck: iva1_mpu_int_ifck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&iva1_ifck_div>; + ti,bit-shift = <8>; + reg = <0x0800>; + }; + + wdt3_ick: wdt3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <28>; + reg = <0x0210>; + }; + + wdt3_fck: wdt3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <28>; + reg = <0x0200>; + }; + + mmc_ick: mmc_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <26>; + reg = <0x0210>; + }; + + mmc_fck: mmc_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <26>; + reg = <0x0200>; + }; + + eac_ick: eac_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <24>; + reg = <0x0210>; + }; + + eac_fck: eac_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <24>; + reg = <0x0200>; + }; + + i2c1_fck: i2c1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <19>; + reg = <0x0200>; + }; + + i2c2_fck: i2c2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <20>; + reg = <0x0200>; + }; + + vlynq_ick: vlynq_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <3>; + reg = <0x0210>; + }; + + vlynq_gate_fck: vlynq_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <3>; + reg = <0x0200>; + }; + + core_d18_ck: core_d18_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <18>; + }; + + vlynq_mux_fck: vlynq_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>; + ti,bit-shift = <15>; + reg = <0x0240>; + }; + + vlynq_fck: vlynq_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>; + }; +}; + +&prcm_clockdomains { + gfx_clkdm: gfx_clkdm { + compatible = "ti,clockdomain"; + clocks = <&gfx_ick>; + }; + + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>; + }; + + wkup_clkdm: wkup_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>, + <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>, + <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>; + }; + + iva1_clkdm: iva1_clkdm { + compatible = "ti,clockdomain"; + clocks = <&iva1_mpu_int_ifck>; + }; + + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss_ick>, <&dss_54m_fck>; + }; + + core_l4_clkdm: core_l4_clkdm { + compatible = "ti,clockdomain"; + clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>, + <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>, + <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>, + <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>, + <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>, + <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, + <&uart3_ick>, <&uart3_fck>, <&cam_ick>, + <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>, + <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>, + <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>, + <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>, + <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>, + <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>, + <&pka_ick>; + }; +}; + +&func_96m_ck { + compatible = "fixed-factor-clock"; + clocks = <&apll96_ck>; + clock-mult = <1>; + clock-div = <1>; +}; + +&dsp_div_fck { + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>; +}; + +&ssi_ssr_sst_div_fck { + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 2d9979835f24..e83b0468080c 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,32 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + prcm: prcm@48008000 { + compatible = "ti,omap2-prcm"; + reg = <0x48008000 0x1000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@48000000 { + compatible = "ti,omap2-scrm"; + reg = <0x48000000 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + counter32k: counter@48004000 { compatible = "ti,omap-counter32k"; reg = <0x48004000 0x20>; diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi new file mode 100644 index 000000000000..805f75df1cf2 --- /dev/null +++ b/arch/arm/boot/dts/omap2430-clocks.dtsi @@ -0,0 +1,344 @@ +/* + * Device Tree Source for OMAP2430 clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&scrm_clocks { + mcbsp3_mux_fck: mcbsp3_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + reg = <0x02e8>; + }; + + mcbsp3_fck: mcbsp3_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; + }; + + mcbsp4_mux_fck: mcbsp4_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + reg = <0x02e8>; + }; + + mcbsp4_fck: mcbsp4_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>; + }; + + mcbsp5_mux_fck: mcbsp5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x02e8>; + }; + + mcbsp5_fck: mcbsp5_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>; + }; +}; + +&prcm_clocks { + iva2_1_gate_ick: iva2_1_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <0>; + reg = <0x0800>; + }; + + iva2_1_div_ick: iva2_1_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0840>; + ti,index-starts-at-one; + }; + + iva2_1_ick: iva2_1_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>; + }; + + mdm_gate_ick: mdm_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0c10>; + }; + + mdm_div_ick: mdm_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + reg = <0x0c40>; + ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>; + }; + + mdm_ick: mdm_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mdm_gate_ick>, <&mdm_div_ick>; + }; + + mdm_osc_ck: mdm_osc_ck { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&osc_ck>; + ti,bit-shift = <1>; + reg = <0x0c00>; + }; + + mcbsp3_ick: mcbsp3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <3>; + reg = <0x0214>; + }; + + mcbsp3_gate_fck: mcbsp3_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <3>; + reg = <0x0204>; + }; + + mcbsp4_ick: mcbsp4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x0214>; + }; + + mcbsp4_gate_fck: mcbsp4_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x0204>; + }; + + mcbsp5_ick: mcbsp5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <5>; + reg = <0x0214>; + }; + + mcbsp5_gate_fck: mcbsp5_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <5>; + reg = <0x0204>; + }; + + mcspi3_ick: mcspi3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <9>; + reg = <0x0214>; + }; + + mcspi3_fck: mcspi3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <9>; + reg = <0x0204>; + }; + + icr_ick: icr_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + reg = <0x0410>; + }; + + i2chs1_fck: i2chs1_fck { + #clock-cells = <0>; + compatible = "ti,omap2430-interface-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <19>; + reg = <0x0204>; + }; + + i2chs2_fck: i2chs2_fck { + #clock-cells = <0>; + compatible = "ti,omap2430-interface-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <20>; + reg = <0x0204>; + }; + + usbhs_ick: usbhs_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <6>; + reg = <0x0214>; + }; + + mmchs1_ick: mmchs1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <7>; + reg = <0x0214>; + }; + + mmchs1_fck: mmchs1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <7>; + reg = <0x0204>; + }; + + mmchs2_ick: mmchs2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <8>; + reg = <0x0214>; + }; + + mmchs2_fck: mmchs2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <8>; + reg = <0x0204>; + }; + + gpio5_ick: gpio5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <10>; + reg = <0x0214>; + }; + + gpio5_fck: gpio5_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <10>; + reg = <0x0204>; + }; + + mdm_intc_ick: mdm_intc_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <11>; + reg = <0x0214>; + }; + + mmchsdb1_fck: mmchsdb1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <16>; + reg = <0x0204>; + }; + + mmchsdb2_fck: mmchsdb2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <17>; + reg = <0x0204>; + }; +}; + +&prcm_clockdomains { + gfx_clkdm: gfx_clkdm { + compatible = "ti,clockdomain"; + clocks = <&gfx_ick>; + }; + + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>; + }; + + wkup_clkdm: wkup_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>, + <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>, + <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>, + <&icr_ick>; + }; + + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss_ick>, <&dss_54m_fck>; + }; + + core_l4_clkdm: core_l4_clkdm { + compatible = "ti,clockdomain"; + clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>, + <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>, + <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>, + <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>, + <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>, + <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>, + <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>, + <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>, + <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>, + <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>, + <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>, + <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>, + <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>, + <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>, + <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>, + <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>, + <&mmchsdb2_fck>; + }; + + mdm_clkdm: mdm_clkdm { + compatible = "ti,clockdomain"; + clocks = <&mdm_osc_ck>; + }; +}; + +&func_96m_ck { + compatible = "ti,mux-clock"; + clocks = <&apll96_ck>, <&alt_ck>; + ti,bit-shift = <4>; + reg = <0x0540>; +}; + +&dsp_div_fck { + ti,max-div = <4>; + ti,index-starts-at-one; +}; + +&ssi_ssr_sst_div_fck { + ti,max-div = <5>; + ti,index-starts-at-one; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 42d2c61c9e2d..c4e8013801ee 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,32 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + prcm: prcm@49006000 { + compatible = "ti,omap2-prcm"; + reg = <0x49006000 0x1000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@49002000 { + compatible = "ti,omap2-scrm"; + reg = <0x49002000 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + counter32k: counter@49020000 { compatible = "ti,omap-counter32k"; reg = <0x49020000 0x20>; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi new file mode 100644 index 000000000000..a1365ca926eb --- /dev/null +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -0,0 +1,1244 @@ +/* + * Device Tree Source for OMAP24xx clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +&scrm_clocks { + mcbsp1_mux_fck: mcbsp1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + reg = <0x0274>; + }; + + mcbsp1_fck: mcbsp1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; + }; + + mcbsp2_mux_fck: mcbsp2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <6>; + reg = <0x0274>; + }; + + mcbsp2_fck: mcbsp2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>; + }; +}; + +&prcm_clocks { + func_32k_ck: func_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + secure_32k_ck: secure_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + virt_12m_ck: virt_12m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + virt_13m_ck: virt_13m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + virt_19200000_ck: virt_19200000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + virt_26m_ck: virt_26m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + aplls_clkin_ck: aplls_clkin_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>; + ti,bit-shift = <23>; + reg = <0x0540>; + }; + + aplls_clkin_x2_ck: aplls_clkin_x2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&aplls_clkin_ck>; + clock-mult = <2>; + clock-div = <1>; + }; + + osc_ck: osc_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>; + ti,bit-shift = <6>; + reg = <0x0060>; + ti,index-starts-at-one; + }; + + sys_ck: sys_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&osc_ck>; + ti,bit-shift = <6>; + ti,max-div = <3>; + reg = <0x0060>; + ti,index-starts-at-one; + }; + + alt_ck: alt_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <54000000>; + }; + + mcbsp_clks: mcbsp_clks { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0x0>; + }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; + + apll96_ck: apll96_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + ti,idlest-shift = <8>; + ti,clock-frequency = <96000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; + + apll54_ck: apll54_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + ti,idlest-shift = <9>; + ti,clock-frequency = <54000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; + + func_54m_ck: func_54m_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&apll54_ck>, <&alt_ck>; + ti,bit-shift = <5>; + reg = <0x0540>; + }; + + core_ck: core_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + func_96m_ck: func_96m_ck { + #clock-cells = <0>; + }; + + apll96_d2_ck: apll96_d2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&apll96_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + func_48m_ck: func_48m_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&apll96_d2_ck>, <&alt_ck>; + ti,bit-shift = <3>; + reg = <0x0540>; + }; + + func_12m_ck: func_12m_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&func_48m_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + sys_clkout_src_gate: sys_clkout_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <7>; + reg = <0x0070>; + }; + + sys_clkout_src_mux: sys_clkout_src_mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>; + reg = <0x0070>; + }; + + sys_clkout_src: sys_clkout_src { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>; + }; + + sys_clkout: sys_clkout { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkout_src>; + ti,bit-shift = <3>; + ti,max-div = <64>; + reg = <0x0070>; + ti,index-power-of-two; + }; + + emul_ck: emul_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&func_54m_ck>; + ti,bit-shift = <0>; + reg = <0x0078>; + }; + + mpu_ck: mpu_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_ck>; + ti,max-div = <31>; + reg = <0x0140>; + ti,index-starts-at-one; + }; + + dsp_gate_fck: dsp_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0800>; + }; + + dsp_div_fck: dsp_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + reg = <0x0840>; + }; + + dsp_fck: dsp_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dsp_gate_fck>, <&dsp_div_fck>; + }; + + core_l3_ck: core_l3_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_ck>; + ti,max-div = <31>; + reg = <0x0240>; + ti,index-starts-at-one; + }; + + gfx_3d_gate_fck: gfx_3d_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <2>; + reg = <0x0300>; + }; + + gfx_3d_div_fck: gfx_3d_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,max-div = <4>; + reg = <0x0340>; + ti,index-starts-at-one; + }; + + gfx_3d_fck: gfx_3d_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>; + }; + + gfx_2d_gate_fck: gfx_2d_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <1>; + reg = <0x0300>; + }; + + gfx_2d_div_fck: gfx_2d_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,max-div = <4>; + reg = <0x0340>; + ti,index-starts-at-one; + }; + + gfx_2d_fck: gfx_2d_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>; + }; + + gfx_ick: gfx_ick { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <0>; + reg = <0x0310>; + }; + + l4_ck: l4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0240>; + ti,index-starts-at-one; + }; + + dss_ick: dss_ick { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <0>; + reg = <0x0210>; + }; + + dss1_gate_fck: dss1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0200>; + }; + + core_d2_ck: core_d2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + core_d3_ck: core_d3_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <3>; + }; + + core_d4_ck: core_d4_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + core_d5_ck: core_d5_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <5>; + }; + + core_d6_ck: core_d6_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <6>; + }; + + dummy_ck: dummy_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + core_d8_ck: core_d8_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <8>; + }; + + core_d9_ck: core_d9_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <9>; + }; + + core_d12_ck: core_d12_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <12>; + }; + + core_d16_ck: core_d16_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <16>; + }; + + dss1_mux_fck: dss1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>; + ti,bit-shift = <8>; + reg = <0x0240>; + }; + + dss1_fck: dss1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dss1_gate_fck>, <&dss1_mux_fck>; + }; + + dss2_gate_fck: dss2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <1>; + reg = <0x0200>; + }; + + dss2_mux_fck: dss2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_ck>, <&func_48m_ck>; + ti,bit-shift = <13>; + reg = <0x0240>; + }; + + dss2_fck: dss2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dss2_gate_fck>, <&dss2_mux_fck>; + }; + + dss_54m_fck: dss_54m_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_54m_ck>; + ti,bit-shift = <2>; + reg = <0x0200>; + }; + + ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <1>; + reg = <0x0204>; + }; + + ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + ti,bit-shift = <20>; + reg = <0x0240>; + }; + + ssi_ssr_sst_fck: ssi_ssr_sst_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>; + }; + + usb_l4_gate_ick: usb_l4_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <0>; + reg = <0x0214>; + }; + + usb_l4_div_ick: usb_l4_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <25>; + reg = <0x0240>; + ti,dividers = <0>, <1>, <2>, <0>, <4>; + }; + + usb_l4_ick: usb_l4_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; + }; + + ssi_l4_ick: ssi_l4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <1>; + reg = <0x0214>; + }; + + gpt1_ick: gpt1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <0>; + reg = <0x0410>; + }; + + gpt1_gate_fck: gpt1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <0>; + reg = <0x0400>; + }; + + gpt1_mux_fck: gpt1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + reg = <0x0440>; + }; + + gpt1_fck: gpt1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; + }; + + gpt2_ick: gpt2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x0210>; + }; + + gpt2_gate_fck: gpt2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <4>; + reg = <0x0200>; + }; + + gpt2_mux_fck: gpt2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <2>; + reg = <0x0244>; + }; + + gpt2_fck: gpt2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; + }; + + gpt3_ick: gpt3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <5>; + reg = <0x0210>; + }; + + gpt3_gate_fck: gpt3_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <5>; + reg = <0x0200>; + }; + + gpt3_mux_fck: gpt3_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <4>; + reg = <0x0244>; + }; + + gpt3_fck: gpt3_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; + }; + + gpt4_ick: gpt4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <6>; + reg = <0x0210>; + }; + + gpt4_gate_fck: gpt4_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <6>; + reg = <0x0200>; + }; + + gpt4_mux_fck: gpt4_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <6>; + reg = <0x0244>; + }; + + gpt4_fck: gpt4_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; + }; + + gpt5_ick: gpt5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <7>; + reg = <0x0210>; + }; + + gpt5_gate_fck: gpt5_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <7>; + reg = <0x0200>; + }; + + gpt5_mux_fck: gpt5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <8>; + reg = <0x0244>; + }; + + gpt5_fck: gpt5_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; + }; + + gpt6_ick: gpt6_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <8>; + reg = <0x0210>; + }; + + gpt6_gate_fck: gpt6_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <8>; + reg = <0x0200>; + }; + + gpt6_mux_fck: gpt6_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <10>; + reg = <0x0244>; + }; + + gpt6_fck: gpt6_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; + }; + + gpt7_ick: gpt7_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <9>; + reg = <0x0210>; + }; + + gpt7_gate_fck: gpt7_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <9>; + reg = <0x0200>; + }; + + gpt7_mux_fck: gpt7_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <12>; + reg = <0x0244>; + }; + + gpt7_fck: gpt7_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; + }; + + gpt8_ick: gpt8_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <10>; + reg = <0x0210>; + }; + + gpt8_gate_fck: gpt8_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <10>; + reg = <0x0200>; + }; + + gpt8_mux_fck: gpt8_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <14>; + reg = <0x0244>; + }; + + gpt8_fck: gpt8_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; + }; + + gpt9_ick: gpt9_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <11>; + reg = <0x0210>; + }; + + gpt9_gate_fck: gpt9_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <11>; + reg = <0x0200>; + }; + + gpt9_mux_fck: gpt9_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <16>; + reg = <0x0244>; + }; + + gpt9_fck: gpt9_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>; + }; + + gpt10_ick: gpt10_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <12>; + reg = <0x0210>; + }; + + gpt10_gate_fck: gpt10_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <12>; + reg = <0x0200>; + }; + + gpt10_mux_fck: gpt10_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <18>; + reg = <0x0244>; + }; + + gpt10_fck: gpt10_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; + }; + + gpt11_ick: gpt11_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <13>; + reg = <0x0210>; + }; + + gpt11_gate_fck: gpt11_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <13>; + reg = <0x0200>; + }; + + gpt11_mux_fck: gpt11_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <20>; + reg = <0x0244>; + }; + + gpt11_fck: gpt11_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>; + }; + + gpt12_ick: gpt12_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <14>; + reg = <0x0210>; + }; + + gpt12_gate_fck: gpt12_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <14>; + reg = <0x0200>; + }; + + gpt12_mux_fck: gpt12_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <22>; + reg = <0x0244>; + }; + + gpt12_fck: gpt12_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>; + }; + + mcbsp1_ick: mcbsp1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <15>; + reg = <0x0210>; + }; + + mcbsp1_gate_fck: mcbsp1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <15>; + reg = <0x0200>; + }; + + mcbsp2_ick: mcbsp2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <16>; + reg = <0x0210>; + }; + + mcbsp2_gate_fck: mcbsp2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <16>; + reg = <0x0200>; + }; + + mcspi1_ick: mcspi1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <17>; + reg = <0x0210>; + }; + + mcspi1_fck: mcspi1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <17>; + reg = <0x0200>; + }; + + mcspi2_ick: mcspi2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <18>; + reg = <0x0210>; + }; + + mcspi2_fck: mcspi2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <18>; + reg = <0x0200>; + }; + + uart1_ick: uart1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <21>; + reg = <0x0210>; + }; + + uart1_fck: uart1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <21>; + reg = <0x0200>; + }; + + uart2_ick: uart2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <22>; + reg = <0x0210>; + }; + + uart2_fck: uart2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <22>; + reg = <0x0200>; + }; + + uart3_ick: uart3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <2>; + reg = <0x0214>; + }; + + uart3_fck: uart3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <2>; + reg = <0x0204>; + }; + + gpios_ick: gpios_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + reg = <0x0410>; + }; + + gpios_fck: gpios_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <2>; + reg = <0x0400>; + }; + + mpu_wdt_ick: mpu_wdt_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + reg = <0x0410>; + }; + + mpu_wdt_fck: mpu_wdt_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <3>; + reg = <0x0400>; + }; + + sync_32k_ick: sync_32k_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <1>; + reg = <0x0410>; + }; + + wdt1_ick: wdt1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <4>; + reg = <0x0410>; + }; + + omapctrl_ick: omapctrl_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <5>; + reg = <0x0410>; + }; + + cam_fck: cam_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <31>; + reg = <0x0200>; + }; + + cam_ick: cam_ick { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <31>; + reg = <0x0210>; + }; + + mailboxes_ick: mailboxes_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <30>; + reg = <0x0210>; + }; + + wdt4_ick: wdt4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <29>; + reg = <0x0210>; + }; + + wdt4_fck: wdt4_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <29>; + reg = <0x0200>; + }; + + mspro_ick: mspro_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <27>; + reg = <0x0210>; + }; + + mspro_fck: mspro_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <27>; + reg = <0x0200>; + }; + + fac_ick: fac_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <25>; + reg = <0x0210>; + }; + + fac_fck: fac_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <25>; + reg = <0x0200>; + }; + + hdq_ick: hdq_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <23>; + reg = <0x0210>; + }; + + hdq_fck: hdq_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <23>; + reg = <0x0200>; + }; + + i2c1_ick: i2c1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <19>; + reg = <0x0210>; + }; + + i2c2_ick: i2c2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <20>; + reg = <0x0210>; + }; + + gpmc_fck: gpmc_fck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <1>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + sdma_fck: sdma_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_l3_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + sdma_ick: sdma_ick { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <0>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + sdrc_ick: sdrc_ick { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <2>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + des_ick: des_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <0>; + reg = <0x021c>; + }; + + sha_ick: sha_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <1>; + reg = <0x021c>; + }; + + rng_ick: rng_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <2>; + reg = <0x021c>; + }; + + aes_ick: aes_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <3>; + reg = <0x021c>; + }; + + pka_ick: pka_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x021c>; + }; + + usb_fck: usb_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <0>; + reg = <0x0204>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4df68ad3736a..a8bd4349c7d2 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -26,7 +26,44 @@ }; }; +&dss { + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins1 + &dss_dpi_pins2 + >; +}; + &omap3_pmx_core { + dss_dpi_pins1: pinmux_dss_dpi_pins2 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ @@ -75,6 +112,19 @@ }; }; +&omap3_pmx_wkup { + dss_dpi_pins2: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + >; + }; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -89,7 +139,16 @@ status = "disabled"; }; +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 3007e79c9cd6..8ae8f007c8ad 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -44,6 +44,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +#include "omap3-panel-sharp-ls037v7dw01.dtsi" + +&backlight0 { + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; +}; &i2c2 { clock-frequency = <400000>; @@ -61,6 +66,27 @@ }; }; +&lcd_3v3 { + gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */ + enable-active-low; +}; + +&lcd0 { + enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ + reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ + mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ + &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ + &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ +}; + +&mcspi1 { + tsc2046@0 { + interrupt-parent = <&gpio6>; + interrupts = <15 0>; /* gpio175 */ + pendown-gpio = <&gpio6 15 0>; + }; +}; + &mmc1 { vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts index f8ad125fa46f..021311f7964b 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -44,6 +44,36 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + spi_lcd { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_pins>; + + gpio-sck = <&gpio1 12 0>; + gpio-miso = <&gpio1 18 0>; + gpio-mosi = <&gpio1 20 0>; + cs-gpios = <&gpio1 19 0>; + num-chipselects = <1>; + + /* lcd panel */ + lcd: td028ttec1@0 { + compatible = "toppoly,td028ttec1"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; }; &omap3_pmx_core { @@ -78,6 +108,47 @@ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + spi_gpio_pins: spi_gpio_pinmux { + pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */ + 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */ + 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */ + 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */ + >; + }; }; &i2c1 { @@ -219,3 +290,22 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3150000>; }; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = < &dss_dpi_pins >; + + status = "okay"; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 0abe986a4ecc..af272c156e21 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -164,6 +164,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +#include "omap3-panel-sharp-ls037v7dw01.dtsi" + +&backlight0 { + gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; +}; &i2c2 { clock-frequency = <400000>; @@ -173,6 +178,25 @@ clock-frequency = <400000>; }; +/* tps61130rsa enabled by twl4030 regen */ +&lcd_3v3 { + regulator-always-on; +}; + +&lcd0 { + enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>; /* lcd INI */ + reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; /* gpio55, lcd RESB */ + mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio56, lcd MO */ +}; + +&mcspi1 { + tsc2046@0 { + interrupt-parent = <&gpio2>; + interrupts = <22 0>; /* gpio54 */ + pendown-gpio = <&gpio2 22 0>; + }; +}; + &mmc1 { /* See 35xx errata 2.1.1.128 in SPRZ278F */ compatible = "ti,omap3-pre-es3-hsmmc"; @@ -234,6 +258,10 @@ }; }; +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + &usb_otg_hs { pinctrl-names = "default"; pinctrl-0 = <&musb_pins>; @@ -247,8 +275,3 @@ /* Needed for ads7846 */ regulator-name = "vcc"; }; - -&vpll2 { - /* Needed for DSS */ - regulator-name = "vdds_dsi"; -}; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index cc1dce6978f5..d97308896f0c 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -176,9 +176,6 @@ &omap3_pmx_core2 { pinctrl-names = "default"; - pinctrl-0 = < - &hsusb1_2_pins - >; hsusb1_2_pins: pinmux_hsusb1_2_pins { pinctrl-single,pins = < @@ -357,6 +354,10 @@ power = <50>; }; +&mcbsp2 { + status = "okay"; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>, <7 0 0x15000000 0x01000000>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 1a57b61f5e24..ae8ae3f4f9bf 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "omap34xx-hs.dtsi" +#include <dt-bindings/input/input.h> / { model = "Nokia N900"; @@ -21,6 +22,17 @@ }; }; + leds { + compatible = "gpio-leds"; + heartbeat { + label = "debug::sleep"; + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&debug_leds>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -90,6 +102,19 @@ }; }; }; + + sound: n900-audio { + compatible = "nokia,n900-audio"; + + nokia,cpu-dai = <&mcbsp2>; + nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; + nokia,headphone-amplifier = <&tpa6130a2>; + + tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ + jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ + eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ + speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; + }; }; &omap3_pmx_core { @@ -130,6 +155,21 @@ >; }; + debug_leds: pinmux_debug_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ + >; + }; + + mcspi4_pins: pinmux_mcspi4_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ + 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ + 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ + 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ @@ -173,6 +213,37 @@ 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ >; }; + + wl1251_pins: pinmux_wl1251 { + pinctrl-single,pins = < + 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ + 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ + >; + }; + + ssi_pins: pinmux_ssi { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + >; + }; + + modem_pins: pinmux_modem { + pinctrl-single,pins = < + 0x0ac (PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ + 0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + 0x0b2 (PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ + 0x0b4 (PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ + 0x0b6 (PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ + 0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ + >; + }; }; &i2c1 { @@ -283,57 +354,57 @@ }; &twl_keypad { - linux,keymap = < 0x00000010 /* KEY_Q */ - 0x00010018 /* KEY_O */ - 0x00020019 /* KEY_P */ - 0x00030033 /* KEY_COMMA */ - 0x0004000e /* KEY_BACKSPACE */ - 0x0006001e /* KEY_A */ - 0x0007001f /* KEY_S */ - - 0x01000011 /* KEY_W */ - 0x01010020 /* KEY_D */ - 0x01020021 /* KEY_F */ - 0x01030022 /* KEY_G */ - 0x01040023 /* KEY_H */ - 0x01050024 /* KEY_J */ - 0x01060025 /* KEY_K */ - 0x01070026 /* KEY_L */ - - 0x02000012 /* KEY_E */ - 0x02010034 /* KEY_DOT */ - 0x02020067 /* KEY_UP */ - 0x0203001c /* KEY_ENTER */ - 0x0205002c /* KEY_Z */ - 0x0206002d /* KEY_X */ - 0x0207002e /* KEY_C */ - 0x02080043 /* KEY_F9 */ - - 0x03000013 /* KEY_R */ - 0x0301002f /* KEY_V */ - 0x03020030 /* KEY_B */ - 0x03030031 /* KEY_N */ - 0x03040032 /* KEY_M */ - 0x03050039 /* KEY_SPACE */ - 0x03060039 /* KEY_SPACE */ - 0x03070069 /* KEY_LEFT */ - - 0x04000014 /* KEY_T */ - 0x0401006c /* KEY_DOWN */ - 0x0402006a /* KEY_RIGHT */ - 0x0404001d /* KEY_LEFTCTRL */ - 0x04050064 /* KEY_RIGHTALT */ - 0x0406002a /* KEY_LEFTSHIFT */ - 0x04080044 /* KEY_F10 */ - - 0x05000015 /* KEY_Y */ - 0x05080057 /* KEY_F11 */ - - 0x06000016 /* KEY_U */ - - 0x07000017 /* KEY_I */ - 0x07010041 /* KEY_F7 */ - 0x07020042 /* KEY_F8 */ + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q) + MATRIX_KEY(0x00, 0x01, KEY_O) + MATRIX_KEY(0x00, 0x02, KEY_P) + MATRIX_KEY(0x00, 0x03, KEY_COMMA) + MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE) + MATRIX_KEY(0x00, 0x06, KEY_A) + MATRIX_KEY(0x00, 0x07, KEY_S) + + MATRIX_KEY(0x01, 0x00, KEY_W) + MATRIX_KEY(0x01, 0x01, KEY_D) + MATRIX_KEY(0x01, 0x02, KEY_F) + MATRIX_KEY(0x01, 0x03, KEY_G) + MATRIX_KEY(0x01, 0x04, KEY_H) + MATRIX_KEY(0x01, 0x05, KEY_J) + MATRIX_KEY(0x01, 0x06, KEY_K) + MATRIX_KEY(0x01, 0x07, KEY_L) + + MATRIX_KEY(0x02, 0x00, KEY_E) + MATRIX_KEY(0x02, 0x01, KEY_DOT) + MATRIX_KEY(0x02, 0x02, KEY_UP) + MATRIX_KEY(0x02, 0x03, KEY_ENTER) + MATRIX_KEY(0x02, 0x05, KEY_Z) + MATRIX_KEY(0x02, 0x06, KEY_X) + MATRIX_KEY(0x02, 0x07, KEY_C) + MATRIX_KEY(0x02, 0x08, KEY_F9) + + MATRIX_KEY(0x03, 0x00, KEY_R) + MATRIX_KEY(0x03, 0x01, KEY_V) + MATRIX_KEY(0x03, 0x02, KEY_B) + MATRIX_KEY(0x03, 0x03, KEY_N) + MATRIX_KEY(0x03, 0x04, KEY_M) + MATRIX_KEY(0x03, 0x05, KEY_SPACE) + MATRIX_KEY(0x03, 0x06, KEY_SPACE) + MATRIX_KEY(0x03, 0x07, KEY_LEFT) + + MATRIX_KEY(0x04, 0x00, KEY_T) + MATRIX_KEY(0x04, 0x01, KEY_DOWN) + MATRIX_KEY(0x04, 0x02, KEY_RIGHT) + MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL) + MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT) + MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT) + MATRIX_KEY(0x04, 0x08, KEY_F10) + + MATRIX_KEY(0x05, 0x00, KEY_Y) + MATRIX_KEY(0x05, 0x08, KEY_F11) + + MATRIX_KEY(0x06, 0x00, KEY_U) + + MATRIX_KEY(0x07, 0x00, KEY_I) + MATRIX_KEY(0x07, 0x01, KEY_F7) + MATRIX_KEY(0x07, 0x02, KEY_F8) >; }; @@ -580,9 +651,24 @@ * Also... order in the device tree actually matters here. */ tsc2005@0 { - compatible = "tsc2005"; + compatible = "ti,tsc2005"; spi-max-frequency = <6000000>; reg = <0>; + + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-max-x = <4096>; + touchscreen-max-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; }; acx565akm@2 { @@ -604,6 +690,30 @@ }; }; +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi4_pins>; + + wl1251@0 { + pinctrl-names = "default"; + pinctrl-0 = <&wl1251_pins>; + + vio-supply = <&vio>; + + compatible = "ti,wl1251"; + reg = <0>; + spi-max-frequency = <48000000>; + + spi-cpol; + spi-cpha; + + ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ + + interrupt-parent = <&gpio2>; + interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ + }; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; @@ -618,11 +728,13 @@ }; &uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; @@ -662,3 +774,48 @@ }; }; }; + +&mcbsp2 { + status = "ok"; +}; + +&ssi_port1 { + pinctrl-names = "default"; + pinctrl-0 = <&ssi_pins>; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + + modem: hsi-client { + compatible = "nokia,n900-modem"; + + pinctrl-names = "default"; + pinctrl-0 = <&modem_pins>; + + hsi-channel-ids = <0>, <1>, <2>, <3>; + hsi-channel-names = "mcsaab-control", + "speech-control", + "speech-data", + "mcsaab-data"; + hsi-speed-kbps = <55000>; + hsi-mode = "frame"; + hsi-flow = "synchronized"; + hsi-arb-mode = "round-robin"; + + interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ + + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ + <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ + <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ + <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ + <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ + gpio-names = "cmt_apeslpx", + "cmt_rst_rq", + "cmt_en", + "cmt_rst", + "cmt_bsi"; + }; +}; + +&ssi_port2 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 5c26c184f2c1..70addcba37c5 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -67,6 +67,20 @@ ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ }; +/* CSI-2 receiver */ +&vaux2 { + regulator-name = "vaux2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +/* Cameras */ +&vaux3 { + regulator-name = "vaux3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index 19d64864a109..7aae8fb82c1f 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd35.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 19de6ff79686..17b82f82638a 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi new file mode 100644 index 000000000000..802f704f67e5 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * DVI output for some Gumstix Overo boards (Tobi and Summit) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &dvi0; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi new file mode 100644 index 000000000000..233c69e50ae3 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lb035_pins: pinmux_lb035_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */ + + default-on; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + lcd0: display@0 { + compatible = "lgphilips,lb035q02"; + label = "lcd"; + + reg = <1>; /* CS1 */ + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + + pinctrl-names = "default"; + pinctrl-0 = <&lb035_pins>; + enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio4>; + interrupts = <18 0>; /* gpio_114 */ + pendown-gpio = <&gpio4 18 0>; + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi new file mode 100644 index 000000000000..f5395b7da912 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "samsung,lte430wq-f0c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */ + + default-on; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio4>; + interrupts = <18 0>; /* gpio_114 */ + pendown-gpio = <&gpio4 18 0>; + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; +}; + diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi index 5e848c26986b..49d2254a99b0 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi index abea232825b9..087aedf5b902 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi index 999d1cd4a09f..0ac97ba98549 100644 --- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-dvi.dtsi" / { leds { diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 13df50b39442..9e24b6a1d07b 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-dvi.dtsi" / { leds { diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi new file mode 100644 index 000000000000..f4b1a61853e3 --- /dev/null +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -0,0 +1,71 @@ +/* + * Common file for omap dpi panels with QVGA and reset pins + * + * Note that the board specifc DTS file needs to specify + * at minimum the GPIO enable-gpios for display, and + * gpios for gpio-backlight. + */ + +/ { + aliases { + display0 = &lcd0; + }; + + backlight0: backlight { + compatible = "gpio-backlight"; + default-on; + }; + + /* 3.3V GPIO controlled regulator for LCD_ENVDD */ + lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <70000>; + }; + + lcd0: display { + compatible = "sharp,ls037v7dw01"; + label = "lcd"; + power-supply = <&lcd_3v3>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <18>; + }; + }; +}; + +&mcspi1 { + tsc2046@0 { + reg = <0>; /* CS0 */ + compatible = "ti,tsc2046"; + spi-max-frequency = <1000000>; + vcc-supply = <&lcd_3v3>; + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,pressure-max = /bits/ 16 <255>; + ti,swap-xy; + linux,wakeup; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4231191ade06..b2891a9a6975 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -267,7 +267,7 @@ uart1: serial@4806a000 { compatible = "ti,omap3-uart"; reg = <0x4806a000 0x2000>; - interrupts = <72>; + interrupts-extended = <&intc 72>; dmas = <&sdma 49 &sdma 50>; dma-names = "tx", "rx"; ti,hwmods = "uart1"; @@ -277,7 +277,7 @@ uart2: serial@4806c000 { compatible = "ti,omap3-uart"; reg = <0x4806c000 0x400>; - interrupts = <73>; + interrupts-extended = <&intc 73>; dmas = <&sdma 51 &sdma 52>; dma-names = "tx", "rx"; ti,hwmods = "uart2"; @@ -287,7 +287,7 @@ uart3: serial@49020000 { compatible = "ti,omap3-uart"; reg = <0x49020000 0x400>; - interrupts = <74>; + interrupts-extended = <&intc 74>; dmas = <&sdma 53 &sdma 54>; dma-names = "tx", "rx"; ti,hwmods = "uart3"; @@ -757,6 +757,51 @@ clock-names = "fck"; }; }; + + ssi: ssi-controller@48058000 { + compatible = "ti,omap3-ssi"; + ti,hwmods = "ssi"; + + status = "disabled"; + + reg = <0x48058000 0x1000>, + <0x48059000 0x1000>; + reg-names = "sys", + "gdd"; + + interrupts = <71>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ssi_port1: ssi-port@4805a000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805a000 0x800>, + <0x4805a800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <67>, + <68>; + }; + + ssi_port2: ssi-port@4805b000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805b000 0x800>, + <0x4805b800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <69>, + <70>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 2e92360da1f3..3819c1e91591 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -40,6 +40,17 @@ }; }; +&ssi { + status = "ok"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; +}; + /include/ "omap34xx-omap36xx-clocks.dtsi" /include/ "omap36xx-omap3430es2plus-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index 6b5280d04a0e..200ae3a5cbbb 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -83,7 +83,7 @@ }; &dpll4_m5x2_mul_ck { - clock-mult = <1>; + ti,clock-mult = <1>; }; &dpll4_m6x2_mul_ck { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 22cf4647087e..541704a59a5a 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -78,6 +78,17 @@ clock-names = "fck", "tv_dac_clk"; }; +&ssi { + status = "ok"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; +}; + /include/ "omap34xx-omap36xx-clocks.dtsi" /include/ "omap36xx-omap3430es2plus-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 12be2b35dae9..e47ff69dcf70 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -453,10 +453,11 @@ dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,fixed-factor-clock"; clocks = <&dpll4_m5_ck>; - clock-mult = <2>; - clock-div = <1>; + ti,clock-mult = <2>; + ti,clock-div = <1>; + ti,set-rate-parent; }; dpll4_m5x2_ck: dpll4_m5x2_ck { diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 96f51d870812..6dc84d9f9b4c 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -15,6 +15,10 @@ model = "OMAP4430 Gumstix Duovero on Parlor"; compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; + aliases { + display0 = &hdmi0; + }; + leds { compatible = "gpio-leds"; led0 { @@ -35,6 +39,21 @@ gpio-key,wakeup; }; }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; }; &omap4_pmx_core { @@ -46,35 +65,44 @@ led_pins: pinmux_led_pins { pinctrl-single,pins = < - 0xd6 (PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ + OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ >; }; button_pins: pinmux_button_pins { pinctrl-single,pins = < - 0xd4 (PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ + OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; smsc_pins: pinmux_smsc_pins { pinctrl-single,pins = < - 0x28 (PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ - 0x2a (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ - 0x30 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ + OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ + OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ + OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ >; }; }; @@ -143,4 +171,20 @@ }; }; +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index a514791154eb..e860ccd9d09c 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -67,100 +67,98 @@ pinctrl-names = "default"; pinctrl-0 = < &twl6040_pins - &mcpdm_pins - &mcbsp1_pins &hsusbb1_pins >; twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0x126 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ - 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < - 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < - 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ - 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ - 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ - 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ + OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ >; }; hsusbb1_pins: pinmux_hsusbb1_pins { pinctrl-single,pins = < - 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ - 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ - 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ - 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ - 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ - 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ - 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ - 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ - 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ - 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ - 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ - 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ >; }; hsusb1phy_pins: pinmux_hsusb1phy_pins { pinctrl-single,pins = < - 0x4c (PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ + OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ >; }; w2cbw0015_pins: pinmux_w2cbw0015_pins { pinctrl-single,pins = < - 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ - 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < - 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ - 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0xa2 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ - 0xa4 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ - 0xa6 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */ - 0xa8 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ - 0xaa (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ - 0xac (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ >; }; mmc5_pins: pinmux_mmc5_pins { pinctrl-single,pins = < - 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */ >; }; }; @@ -202,6 +200,18 @@ clock-frequency = <400000>; }; +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index d2c45bfaaa2c..8cfa3c8a72b0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -481,6 +481,21 @@ usb-supply = <&vusb>; }; +&uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; +}; + &usb_otg_hs { interface-type = <1>; mode = <3>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 48983c8d56c2..3e1da43068f6 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -570,16 +570,22 @@ }; &uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; diff --git a/arch/arm/boot/dts/omap4-var-dvk-om44.dts b/arch/arm/boot/dts/omap4-var-dvk-om44.dts new file mode 100644 index 000000000000..458d79fa378b --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-dvk-om44.dts @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4-var-som-om44.dtsi" +#include "omap4-var-som-om44-wlan.dtsi" +#include "omap4-var-om44customboard.dtsi" + +/ { + model = "Variscite VAR-DVK-OM44"; + compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + + lcd0: display { + compatible = "innolux,at070tn83", "panel-dpi"; + label = "lcd"; + panel-timing { + clock-frequency = <33333333>; + + hback-porch = <40>; + hactive = <800>; + hfront-porch = <40>; + hsync-len = <48>; + + vback-porch = <29>; + vactive = <480>; + vfront-porch = <13>; + vsync-len = <3>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + backlight { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */ + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&dsi2 { + status = "okay"; + vdd-supply = <&vcxio>; +}; diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi new file mode 100644 index 000000000000..f2d2fdb75628 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -0,0 +1,235 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + aliases { + display0 = &hdmi0; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_led_pins>; + + led0 { + label = "var:green:led0"; + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */ + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "var:green:led1"; + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + #address-cells = <1>; + #size-cells = <0>; + + user-key@184 { + label = "user"; + gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */ + linux,code = <BTN_EXTRA>; + gpio-key,wakeup; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_pins>; + label = "hdmi"; + type = "a"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; +}; + +&omap4_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi1_cs2.uart1_cts */ + OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1) /* mcspi1_cs3.uart1_rts */ + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1) /* i2c2_scl.uart1_rx */ + OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1) /* i2c2_sda.uart1_tx */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + mcasp_pins: pinmux_mcsasp_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2) /* mcbsp2_dr.abe_mcasp_axr */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ + OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ + OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ + OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ + OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ + OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ + OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ + OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ + OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ + OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ + OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ + OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ + OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ + OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ + OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ + OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ + OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ + OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ + OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ + OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ + OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ + OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ + OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ + OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ + OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ + OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ + OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + mmc5_pins: pinmux_mmc5_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3) /* abe_mcbsp2_clkx.gpio_110 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; + + gpio_led_pins: pinmux_gpio_led_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3) /* kpd_col4.gpio_172 */ + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */ + >; + }; + + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3) /* sys_boot0.gpio_184 */ + >; + }; + + ks8851_irq_pins: pinmux_ks8851_irq_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3) /* kpd_col3.gpio_171 */ + >; + }; + + hdmi_hpd_pins: pinmux_hdmi_hpd_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ + >; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + status = "okay"; + + eth@0 { + compatible = "ks8851"; + pinctrl-names = "default"; + pinctrl-0 = <&ks8851_irq_pins>; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */ + }; +}; + +&mmc5 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc5_pins>; + vmmc-supply = <&vbat>; + bus-width = <4>; + cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */ + status = "okay"; +}; + +&dss { + status = "okay"; +}; + +&hdmi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi new file mode 100644 index 000000000000..cc66af419236 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + /* regulator for wl12xx on sdio4 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_ctrl_pins>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 11 0>; /* gpio 43 */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&omap4_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a17.gpio_41 (WLAN_IRQ) */ + OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3) /* gpmc_a18.gpio_42 (BT_EN) */ + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 (WLAN_EN) */ + >; + }; + + mmc4_pins: pinmux_mmc4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_clk.sdmmc4_clk */ + OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_simo.sdmmc4_cmd */ + OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_somi.sdmmc4_dat0 */ + OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_tx.sdmmc4_dat1 */ + OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_rx.sdmmc4_dat2 */ + OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_cs0.sdmmc4_dat3 */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&mmc4 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc4_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi new file mode 100644 index 000000000000..062701e1a898 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -0,0 +1,343 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "omap4460.dtsi" + +/ { + model = "Variscite VAR-SOM-OM44"; + compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + sound: sound@0 { + compatible = "ti,abe-twl6040"; + ti,model = "VAR-SOM-OM44"; + + ti,mclk-freq = <38400000>; + ti,mcpdm = <&mcpdm>; + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "AFML", "Line In", + "AFMR", "Line In"; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_phy_clk_pins + &hsusbb1_phy_rst_pins + >; + + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */ + vcc-supply = <&vbat>; + + clocks = <&auxclk3_ck>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + + vbat: fixedregulator-vbat { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3) /* fref_clk2_out.gpio_182 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + >; + }; + + tsc2004_pins: pinmux_tsc2004_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */ + OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3) /* gpmc_ncs5.gpio_102 (rst) */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + >; + }; + + hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3) /* kpd_row2.gpio_177 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; +}; + +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_hub_rst_pins + &lan7500_rst_pins + >; + + hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */ + >; + }; + + hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3) /* gpio_wk1 */ + >; + }; + + lan7500_rst_pins: pinmux_lan7500_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3) /* gpio_wk0 */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; +}; + +#include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" + +&vusim { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + clock-frequency = <400000>; + + touchscreen: tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&tsc2004_pins>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */ + status = "disabled"; + }; + + tmp105@49 { + compatible = "ti,tmp105"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "microchip,24c32"; + reg = <0x50>; + }; +}; + +&i2c4 { + status = "disabled"; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&gpmc { + status = "disabled"; +}; + +&mcspi1 { + status = "disabled"; +}; + +&mcspi2 { + status = "disabled"; +}; + +&mcspi3 { + status = "disabled"; +}; + +&mcspi4 { + status = "disabled"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc>; + bus-width = <4>; + ti,non-removable; + status = "okay"; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&uart1 { + status = "disabled"; +}; + +&uart2 { + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&keypad { + status = "disabled"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; +}; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts deleted file mode 100644 index b41269e871dd..000000000000 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/dts-v1/; - -#include "omap443x.dtsi" - -/ { - model = "Variscite OMAP4 SOM"; - compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - vdd_eth: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "VDD_ETH"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - regulator-boot-on; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; -}; - -#include "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; - - /* - * Temperature Sensor - * http://www.ti.com/lit/ds/symlink/tmp105.pdf - */ - tmp105@49 { - compatible = "ti,tmp105"; - reg = <0x49>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mcspi1 { - eth@0 { - compatible = "ks8851"; - spi-max-frequency = <24000000>; - reg = <0>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */ - vdd-supply = <&vdd_eth>; - }; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - ti,bus-width = <8>; - ti,non-removable; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,bus-width = <4>; -}; diff --git a/arch/arm/boot/dts/omap4-var-stk-om44.dts b/arch/arm/boot/dts/omap4-var-stk-om44.dts new file mode 100644 index 000000000000..56b64e618608 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-stk-om44.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4-var-som-om44.dtsi" +#include "omap4-var-som-om44-wlan.dtsi" +#include "omap4-var-om44customboard.dtsi" + +/ { + model = "Variscite VAR-STK-OM44"; + compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 649b5cd38b40..7e26d222bfe3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -67,6 +67,7 @@ local-timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; + clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; }; @@ -311,7 +312,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -319,7 +320,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -327,7 +328,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -642,6 +643,8 @@ compatible = "ti,omap-usb2"; reg = <0x4a0ad080 0x58>; ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>; + clock-names = "wkupclk"; #phy-cells = <0>; }; }; @@ -919,6 +922,8 @@ ti,hwmods = "dss_hdmi"; clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; }; }; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts new file mode 100644 index 000000000000..b8698ca68647 --- /dev/null +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -0,0 +1,413 @@ +/* + * Support for CompuLab CM-T54 + */ +/dts-v1/; + +#include "omap5.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "CompuLab CM-T54"; + compatible = "compulab,omap5-cm-t54", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x7F000000>; /* 2048 MB */ + }; + + vmmcsd_fixed: fixed-regulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vwlan_pdn_fixed: fixed-regulator-vwlan-pdn { + compatible = "regulator-fixed"; + regulator-name = "vwlan_pdn_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ldo2_reg>; + gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* gpio4_109 */ + startup-delay-us = <1000>; + enable-active-high; + }; + + vwlan_fixed: fixed-regulator-vwlan { + compatible = "regulator-fixed"; + regulator-name = "vwlan_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vwlan_pdn_fixed>; + gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio4_110 */ + startup-delay-us = <1000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */ + }; + + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */ + }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "Heartbeat"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &led_gpio_pins + &usbhost_pins + >; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */ + OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */ + OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */ + OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */ + OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */ + OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */ + OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */ + OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */ + OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */ + OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */ + OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */ + OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */ + OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */ + OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */ + OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */ + OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_gpios_pins: pinmux_wlan_gpios_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */ + OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */ + >; + }; + + usbhost_pins: pinmux_usbhost_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + + OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + + OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */ + OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&ldo9_reg>; + bus-width = <4>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = < + &mmc3_pins + &wlan_gpios_pins + >; + vmmc-supply = <&vwlan_fixed>; + bus-width = <4>; + ti,non-removable; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <16>; + reg = <0x50>; + }; + + palmas: palmas@48 { + compatible = "ti,palmas"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + reg = <0x48>; + interrupt-controller; + #interrupt-cells = <2>; + ti,system-power-controller; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + }; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-name = "short-irq"; + + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + /* VDD_OPP_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_OPP_MM */ + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_OPP_CORE */ + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ + regulator-name = "smps9"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + ti,smps-range = <0x80>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out2_reg: smps10_out2 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: ldo2 { + /* VDD_3V3_WLAN */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <1000>; + }; + + ldo3_reg: ldo3 { + /* VCC_1V5_AUD */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ + regulator-name = "ldo7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; + }; + + ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ + regulator-name = "ldo8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + /* Unused */ + status = "disabled"; + }; + + ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; +}; + +&usbhshost { + port2-mode = "ehci-hsic"; + port3-mode = "ehci-hsic"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy &hsusb3_phy>; +}; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts new file mode 100644 index 000000000000..aa98fea3f2b3 --- /dev/null +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -0,0 +1,51 @@ +/* + * Suppport for CompuLab SBC-T54 with CM-T54 + */ + +#include "omap5-cm-t54.dts" + +/ { + model = "CompuLab SBC-T54 with CM-T54"; + compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; +}; + +&omap5_pmx_core { + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + mmc1_aux_pins: pinmux_mmc1_aux_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */ + OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = < + &mmc1_pins + &mmc1_aux_pins + >; + cd-inverted; + wp-inverted; + cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */ + wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */ +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 3b99ec25b748..1e1b05768cec 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -20,6 +20,10 @@ reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; + aliases { + display0 = &hdmi0; + }; + vmmcsd_fixed: fixedregulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -51,6 +55,51 @@ default-state = "off"; }; }; + + tpd12s015: encoder@0 { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ + <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ + <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "b"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; }; &omap5_pmx_core { @@ -183,6 +232,19 @@ >; }; + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; }; &omap5_pmx_wkup { @@ -434,6 +496,13 @@ pinctrl-0 = <&i2c5_pins>; clock-frequency = <400000>; + + gpio9: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; }; &mcbsp3 { @@ -491,3 +560,21 @@ &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 36b4312a5e0d..3bfda16c8b52 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -82,6 +82,12 @@ <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; }; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; @@ -810,6 +816,8 @@ compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; @@ -876,6 +884,108 @@ #thermal-sensor-cells = <1>; }; + + omap_control_sata: control-phy@4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp@4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x4a090000 0x20>; + ranges; + ti,hwmods = "ocp2scp3"; + sata_phy: phy@4a096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin>; + clock-names = "sysclk"; + #phy-cells = <0>; + }; + }; + + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; + + dss: dss@58000000 { + compatible = "ti,omap5-dss"; + reg = <0x58000000 0x80>; + status = "disabled"; + ti,hwmods = "dss_core"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@58001000 { + compatible = "ti,omap5-dispc"; + reg = <0x58001000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + }; + + dsi1: encoder@58004000 { + compatible = "ti,omap5-dsi"; + reg = <0x58004000 0x200>, + <0x58004200 0x40>, + <0x58004300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_dsi1"; + clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + }; + + dsi2: encoder@58005000 { + compatible = "ti,omap5-dsi"; + reg = <0x58009000 0x200>, + <0x58009200 0x40>, + <0x58009300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_dsi2"; + clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + }; + + hdmi: encoder@58060000 { + compatible = "ti,omap5-hdmi"; + reg = <0x58040000 0x200>, + <0x58040200 0x80>, + <0x58040300 0x80>, + <0x58060000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_hdmi"; + clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index d487fdab3921..aeb142ce8e9d 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -120,10 +120,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x01f0>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; abe_24m_fclk: abe_24m_fclk { @@ -145,10 +143,11 @@ abe_iclk: abe_iclk { #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&abe_clk>; - clock-mult = <1>; - clock-div = <2>; + compatible = "ti,divider-clock"; + clocks = <&aess_fclk>; + ti,bit-shift = <24>; + reg = <0x0528>; + ti,dividers = <2>, <1>; }; abe_lp_clk_div: abe_lp_clk_div { @@ -164,10 +163,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x01f4>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_ck: dpll_core_ck { @@ -188,10 +185,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; c2c_fclk: c2c_fclk { @@ -215,10 +210,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0138>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h12x2_ck: dpll_core_h12x2_ck { @@ -226,10 +219,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x013c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h13x2_ck: dpll_core_h13x2_ck { @@ -237,10 +228,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0140>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h14x2_ck: dpll_core_h14x2_ck { @@ -248,10 +237,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0144>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h22x2_ck: dpll_core_h22x2_ck { @@ -259,10 +246,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0154>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h23x2_ck: dpll_core_h23x2_ck { @@ -270,10 +255,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0158>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h24x2_ck: dpll_core_h24x2_ck { @@ -281,10 +264,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x015c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_m2_ck: dpll_core_m2_ck { @@ -292,10 +273,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0130>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_m3x2_ck: dpll_core_m3x2_ck { @@ -303,10 +282,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0134>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { @@ -335,10 +312,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x01b8>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_iva_h12x2_ck: dpll_iva_h12x2_ck { @@ -346,10 +321,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x01bc>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { @@ -372,10 +345,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0170>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; per_dpll_hs_clk_div: per_dpll_hs_clk_div { @@ -642,10 +613,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0158>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_h12x2_ck: dpll_per_h12x2_ck { @@ -653,10 +622,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x015c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_h14x2_ck: dpll_per_h14x2_ck { @@ -664,10 +631,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0164>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m2_ck: dpll_per_m2_ck { @@ -675,10 +640,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m2x2_ck: dpll_per_m2x2_ck { @@ -686,10 +649,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m3x2_ck: dpll_per_m3x2_ck { @@ -697,10 +658,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0154>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_unipro1_ck: dpll_unipro1_ck { @@ -723,10 +682,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_unipro1_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x0210>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_unipro2_ck: dpll_unipro2_ck { @@ -749,10 +706,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_unipro2_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x01d0>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_usb_ck: dpll_usb_ck { @@ -775,10 +730,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x0190>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; func_128m_clk: func_128m_clk { @@ -851,6 +804,7 @@ clocks = <&dpll_per_h12x2_ck>; ti,bit-shift = <8>; reg = <0x1420>; + ti,set-rate-parent; }; dss_sys_clk: dss_sys_clk { diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts new file mode 100644 index 000000000000..c701e8d16bbb --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts @@ -0,0 +1,236 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "LaCie d2 Network"; + compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + front_button { + label = "Front Push Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_on { + label = "Power rocker switch (on|auto)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <1>; /* D2NET_SWITCH_POWER_ON */ + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_off { + label = "Power rocker switch (auto|off)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */ + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>; + pinctrl-names = "default"; + + sata0_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372b"; + reg = <0x32>; + }; + + fan@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + + /* Not enough HW info */ + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>; + pinctrl-names = "default"; + + pmx_board_id: pmx-board-id { + marvell,pins = "mpp0", "mpp1", "mpp2"; + marvell,function = "gpio"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp8", "mpp9", "mpp18"; + marvell,function = "gpio"; + }; + + pmx_fan_fail: pmx-fan-fail { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + /* + * MPP6: Red front LED + * MPP16: Blue front LED blink control + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp6", "mpp16"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata0_power: pmx-sata0-power { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + pmx_sata1_power: pmx-sata1-power { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5ed6c1376901..89ff404a528c 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -6,8 +6,19 @@ * warranty of any kind, whether express or implied. */ +/* + * TODO: add Orion USB device port init when kernel.org support is added. + * TODO: add flash write support: see below. + * TODO: add power-off support. + * TODO: add I2C EEPROM support. + */ + /dts-v1/; -/include/ "orion5x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" / { model = "LaCie Ethernet Disk mini V2"; @@ -19,49 +30,84 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <166666667>; - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&pmx_power_button>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; button@1 { label = "Power-on Switch"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio0 18 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_power_led>; + pinctrl-names = "default"; led@1 { label = "power:blue"; - gpios = <&gpio0 16 1>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; }; -&mdio { +&devbus_bootcs { status = "okay"; - ethphy: ethernet-phy { - reg = <8>; + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; }; }; +&ehci0 { + status = "okay"; +}; + ð { status = "okay"; @@ -69,3 +115,60 @@ phy-handle = <ðphy>; }; }; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>; + pinctrl-names = "default"; + + pmx_power_button: pmx-power-button { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_power_led: pmx-power-led { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_power_led_ctrl: pmx-power-led-ctrl { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts new file mode 100644 index 000000000000..ff3484904294 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Maxtor Shared Storage II"; + compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x40000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + compatible = "st,m41t81"; + reg = <0x68>; + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_misc>; + pinctrl-names = "default"; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + + /* + * MPP0: Power LED + * MPP1: Error LED + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + /* + * MPP4: HDD ind. (Single/Dual) + * MPP5: HD0 5V control + * MPP6: HD0 12V control + * MPP7: HD1 5V control + * MPP8: HD1 12V control + */ + pmx_misc: pmx-misc { + marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi new file mode 100644 index 000000000000..d1ed71c60209 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "orion5x.dtsi" + +/ { + compatible = "marvell,orion5x-88f5182", "marvell,orion5x"; + + soc { + compatible = "marvell,orion5x-88f5182-mbus", "simple-bus"; + + internal-regs { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f5182-pinctrl"; + reg = <0x10000 0x8>, <0x10050 0x4>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp12", "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp13", "mpp15"; + marvell,function = "sata1"; + }; + }; + + core_clk: core-clocks@10030 { + compatible = "marvell,mv88f5182-core-clock"; + reg = <0x10010 0x4>; + #clock-cells = <1>; + }; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x1500 0x20>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts new file mode 100644 index 000000000000..6fb052507b36 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Marvell Reference Design 88F5182 NAS"; + compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>, + <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_debug_led>; + pinctrl-names = "default"; + + led@0 { + label = "rd88f5182:cpu"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + }; +}; + +&devbus_cs1 { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <1>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + compatible = "dallas,ds1338"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios + &pmx_pci_gpios>; + pinctrl-names = "default"; + + /* + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + pmx_debug_led: pmx-debug_led { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_reset_switch: pmx-reset-switch { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_misc_gpios: pmx-misc-gpios { + marvell,pins = "mpp4", "mpp5"; + marvell,function = "gpio"; + }; + + pmx_pci_gpios: pmx-pci-gpios { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 174d89241f70..75cd01bd6024 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -6,7 +6,9 @@ * warranty of any kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { model = "Marvell Orion5x SoC"; @@ -17,149 +19,214 @@ gpio0 = &gpio0; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020200 0x08>; - }; - - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x4000000 - 0xf2200000 0xf2200000 0x0000800>; - #address-cells = <1>; + soc { + #address-cells = <2>; #size-cells = <1>; + controller = <&mbusc>; - gpio0: gpio@10100 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10100 0x40>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <6>, <7>, <8>, <9>; - }; - - spi@10600 { - compatible = "marvell,orion-spi"; + devbus_bootcs: devbus-bootcs { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <0x10600 0x28>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; + devbus_cs0: devbus-cs0 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - interrupts = <5>; - clock-frequency = <100000>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <3>; - /* set clock-frequency in board dts */ + devbus_cs1: devbus-cs1 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <4>; - /* set clock-frequency in board dts */ + devbus_cs2: devbus-cs2 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - status = "okay"; - }; + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <6>, <7>, <8>, <9>; + }; - ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <17>; - status = "disabled"; - }; + spi: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; - xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - status = "okay"; + i2c: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clocks = <&core_clk 0>; + status = "disabled"; + }; - xor00 { - interrupts = <30>; - dmacap,memcpy; - dmacap,xor; + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + clocks = <&core_clk 0>; + status = "disabled"; }; - xor01 { - interrupts = <31>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + clocks = <&core_clk 0>; + status = "disabled"; }; - }; - eth: ethernet-controller@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <4>; + }; - ethernet-port@0 { - compatible = "marvell,orion-eth-port"; - reg = <0>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ + intc: interrupt-controller@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x08>; }; - }; - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <22>; - status = "disabled"; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; - /* add phy nodes in board file */ - }; + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; + status = "okay"; + }; - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <29>; - status = "disabled"; + ehci0: ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + xor: dma-controller@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor00 { + interrupts = <30>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <31>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethport: ethernet-port@0 { + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <21>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + sata: sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + ehci1: ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,orion-crypto"; - reg = <0x90000 0x10000>, - <0xf2200000 0x800>; + reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>, + <MBUS_ID(0x09, 0x00) 0x0 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; - - ehci@a0000 { - compatible = "marvell,orion-ehci"; - reg = <0xa0000 0x1000>; - interrupts = <12>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 1e82571d6823..963b7e54ab15 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -48,7 +48,7 @@ ranges = <0x40000000 0x40000000 0x80000000>; l2-cache-controller@80040000 { - compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; + compatible = "arm,pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; arm,tag-latency = <1 1 1>; @@ -201,6 +201,7 @@ compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + clocks = <&clks 11>; }; nand@b0030000 { @@ -313,8 +314,9 @@ reg = <0xb00d0000 0x10000>; interrupts = <15>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <25>; - sirf,spi-dma-tx-channel = <20>; + dmas = <&dmac1 9>, + <&dmac1 4>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 19>; @@ -327,8 +329,9 @@ reg = <0xb0170000 0x10000>; interrupts = <16>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <12>; - sirf,spi-dma-tx-channel = <13>; + dmas = <&dmac0 12>, + <&dmac0 13>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 20>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts new file mode 100644 index 000000000000..7c2441d526bc --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -0,0 +1,16 @@ +#include "qcom-apq8064-v2.0.dtsi" + +/ { + model = "Qualcomm APQ8064/IFC6410"; + compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + + soc { + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi new file mode 100644 index 000000000000..935c3945fc5e --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi @@ -0,0 +1 @@ +#include "qcom-apq8064.dtsi" diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi new file mode 100644 index 000000000000..92bf793622c3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -0,0 +1,170 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm APQ8064"; + compatible = "qcom,apq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + }; + + cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; + + acc2: clock-controller@20a8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + }; + + acc3: clock-controller@20b8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw2: regulator@20a9000 { + compatible = "qcom,saw2"; + reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw3: regulator@20b9000 { + compatible = "qcom,saw2"; + reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <0 158 0x0>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-apq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 13ac3e222495..b4dfb01fe6fb 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -3,4 +3,43 @@ / { model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + + soc { + serial@f991e000 { + status = "ok"; + }; + + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "ok"; + }; + + sdhci@f98a4900 { + cd-gpios = <&msmgpio 62 0x1>; + bus-width = <4>; + }; + + + pinctrl@fd510000 { + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts new file mode 100644 index 000000000000..9dae3878b71d --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -0,0 +1,6 @@ +#include "qcom-apq8084.dtsi" + +/ { + model = "Qualcomm APQ 8084-MTP"; + compatible = "qcom,apq8084-mtp", "qcom,apq8084"; +}; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi new file mode 100644 index 000000000000..e3e009a5912b --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -0,0 +1,179 @@ +/dts-v1/; + +#include "skeleton.dtsi" + +/ { + model = "Qualcomm APQ 8084"; + compatible = "qcom,apq8084"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <0>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <1>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <2>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <3>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + }; + + L2: l2-cache { + compatible = "qcom,arch-cache"; + cache-level = <2>; + qcom,saw = <&saw_l2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 7 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + saw_l2: regulator@f9012000 { + compatible = "qcom,saw2"; + reg = <0xf9012000 0x1000>; + regulator; + }; + + acc0: clock-controller@f9088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9088000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc1: clock-controller@f9098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9098000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc2: clock-controller@f90a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90a8000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc3: clock-controller@f90b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90b8000 0x1000>, + <0xf9008000 0x1000>; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 169bad90dac9..45180adfadf1 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -3,4 +3,14 @@ / { model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; + + soc { + gsbi@19c00000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@19c40000 { + status = "ok"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index c52a9e964a44..53837aaa2f72 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -3,6 +3,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8660.h> +#include <dt-bindings/soc/qcom,gsbi.h> / { model = "Qualcomm MSM8660"; @@ -12,16 +13,18 @@ cpus { #address-cells = <1>; #size-cells = <0>; - compatible = "qcom,scorpion"; - enable-method = "qcom,gcc-msm8660"; cpu@0 { + compatible = "qcom,scorpion"; + enable-method = "qcom,gcc-msm8660"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { + compatible = "qcom,scorpion"; + enable-method = "qcom,gcc-msm8660"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -33,55 +36,73 @@ }; }; - intc: interrupt-controller@2080000 { - compatible = "qcom,msm-8660-qgic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02080000 0x1000 >, - < 0x02081000 0x1000 >; - }; + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; - timer@2000000 { - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 0 0x301>, - <1 1 0x301>, - <1 2 0x301>; - reg = <0x02000000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x40000>; - }; + intc: interrupt-controller@2080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; - gpio-controller; - #gpio-cells = <2>; - ngpio = <173>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - }; + timer@2000000 { + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x40000>; + }; - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8660"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + reg = <0x00800000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + ngpio = <173>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + }; - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; - clock-names = "core", "iface"; - }; + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + gsbi12: gsbi@19c00000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x19c00000 0x100>; + clocks = <&gcc GSBI12_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; + serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index a58fb88315f6..8f75cc4c8340 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -3,4 +3,14 @@ / { model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + + soc { + gsbi@16400000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16440000 { + status = "ok"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 997b7b94e117..5303e53e34dc 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -3,6 +3,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/soc/qcom,gsbi.h> / { model = "Qualcomm MSM8960"; @@ -13,10 +14,10 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <1 14 0x304>; - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; @@ -25,6 +26,8 @@ }; cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -35,7 +38,6 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; - interrupts = <0 2 0x4>; }; }; @@ -45,91 +47,109 @@ qcom,no-pc-write; }; - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02000000 0x1000 >, - < 0x02002000 0x1000 >; - }; + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; - timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x80000>; - }; + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - gpio-controller; - #gpio-cells = <2>; - ngpio = <150>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800000 0x4000>; - }; + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpio = <150>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; - acc0: clock-controller@2088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02088000 0x1000>, <0x02008000 0x1000>; - }; + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; - }; + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; - }; + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; - }; + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; - serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = <0 154 0x0>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - }; + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16400000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; - rng@1a500000 { - compatible = "qcom,prng"; - reg = <0x1a500000 0x200>; - clocks = <&gcc PRNG_CLK>; - clock-names = "core"; + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index f68723918b3f..69dca2aca25a 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -13,10 +13,10 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <1 9 0xf04>; - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v2"; cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; @@ -24,6 +24,8 @@ }; cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -31,6 +33,8 @@ }; cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; @@ -38,6 +42,8 @@ }; cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; @@ -47,7 +53,6 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; - interrupts = <0 2 0x4>; qcom,saw = <&saw_l2>; }; }; @@ -57,6 +62,15 @@ interrupts = <1 7 0xf04>; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -71,15 +85,6 @@ <0xf9002000 0x1000>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <19200000>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -190,6 +195,29 @@ interrupts = <0 108 0x0>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; }; rng@f9bff000 { @@ -198,5 +226,15 @@ clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; }; }; diff --git a/arch/arm/boot/dts/r7s72100-genmai-reference.dts b/arch/arm/boot/dts/r7s72100-genmai-reference.dts deleted file mode 100644 index e664611a47c8..000000000000 --- a/arch/arm/boot/dts/r7s72100-genmai-reference.dts +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Device Tree Source for the Genmai board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r7s72100.dtsi" - -/ { - model = "Genmai"; - compatible = "renesas,genmai-reference", "renesas,r7s72100"; - - chosen { - bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; - }; - - memory { - device_type = "memory"; - reg = <0x08000000 0x08000000>; - }; - - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - eeprom@50 { - compatible = "renesas,24c128"; - reg = <0x50>; - pagesize = <64>; - }; -}; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index b1deaf7e2e06..56849b55e1c2 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -1,7 +1,8 @@ /* * Device Tree Source for the Genmai board * - * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013-14 Renesas Solutions Corp. + * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -15,6 +16,10 @@ model = "Genmai"; compatible = "renesas,genmai", "renesas,r7s72100"; + aliases { + serial2 = &scif2; + }; + chosen { bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -29,3 +34,26 @@ #size-cells = <1>; }; }; + +&extal_clk { + clock-frequency = <13330000>; +}; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "renesas,24c128"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&scif2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index ee700717a34b..f50fbc8f3bd9 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -1,13 +1,15 @@ /* * Device Tree Source for the r7s72100 SoC * - * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013-14 Renesas Solutions Corp. + * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ +#include <dt-bindings/clock/r7s72100-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -28,6 +30,112 @@ spi4 = &spi4; }; + clocks { + ranges; + #address-cells = <1>; + #size-cells = <1>; + + /* External clocks */ + extal_clk: extal_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value must be set by board */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + usb_x1_clk: usb_x1_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value must be set by board */ + clock-frequency = <0>; + clock-output-names = "usb_x1"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@fcfe0000 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-cpg-clocks", + "renesas,rz-cpg-clocks"; + reg = <0xfcfe0000 0x18>; + clocks = <&extal_clk>, <&usb_x1_clk>; + clock-output-names = "pll", "i", "g"; + }; + + /* Fixed factor clocks */ + b_clk: b_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <3>; + clock-output-names = "b"; + }; + p1_clk: p1_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <6>; + clock-output-names = "p1"; + }; + p0_clk: p0_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <12>; + clock-output-names = "p0"; + }; + + /* MSTP clocks */ + mstp3_clks: mstp3_clks@fcfe0420 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0420 4>; + clocks = <&p0_clk>; + clock-indices = <R7S72100_CLK_MTU2>; + clock-output-names = "mtu2"; + }; + + mstp4_clks: mstp4_clks@fcfe0424 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0424 4>; + clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>, + <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>; + clock-indices = < + R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3 + R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7 + >; + clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7"; + }; + + mstp9_clks: mstp9_clks@fcfe0438 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0438 4>; + clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>; + clock-indices = < + R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3 + >; + clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3"; + }; + + mstp10_clks: mstp10_clks@fcfe043c { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe043c 4>; + clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>, + <&p1_clk>; + clock-indices = < + R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3 + R7S72100_CLK_SPI4 + >; + clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -61,6 +169,7 @@ <0 162 IRQ_TYPE_LEVEL_HIGH>, <0 163 IRQ_TYPE_LEVEL_HIGH>, <0 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C0>; clock-frequency = <100000>; status = "disabled"; }; @@ -78,6 +187,7 @@ <0 170 IRQ_TYPE_LEVEL_HIGH>, <0 171 IRQ_TYPE_LEVEL_HIGH>, <0 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C1>; clock-frequency = <100000>; status = "disabled"; }; @@ -95,6 +205,7 @@ <0 178 IRQ_TYPE_LEVEL_HIGH>, <0 179 IRQ_TYPE_LEVEL_HIGH>, <0 180 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C2>; clock-frequency = <100000>; status = "disabled"; }; @@ -112,10 +223,107 @@ <0 186 IRQ_TYPE_LEVEL_HIGH>, <0 187 IRQ_TYPE_LEVEL_HIGH>, <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C3>; clock-frequency = <100000>; status = "disabled"; }; + scif0: serial@e8007000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8007000 64>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>, + <0 191 IRQ_TYPE_LEVEL_HIGH>, + <0 192 IRQ_TYPE_LEVEL_HIGH>, + <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@e8007800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8007800 64>; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>, + <0 195 IRQ_TYPE_LEVEL_HIGH>, + <0 196 IRQ_TYPE_LEVEL_HIGH>, + <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@e8008000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8008000 64>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>, + <0 200 IRQ_TYPE_LEVEL_HIGH>, + <0 197 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@e8008800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8008800 64>; + interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>, + <0 203 IRQ_TYPE_LEVEL_HIGH>, + <0 204 IRQ_TYPE_LEVEL_HIGH>, + <0 201 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@e8009000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8009000 64>; + interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>, + <0 207 IRQ_TYPE_LEVEL_HIGH>, + <0 208 IRQ_TYPE_LEVEL_HIGH>, + <0 205 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@e8009800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8009800 64>; + interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>, + <0 211 IRQ_TYPE_LEVEL_HIGH>, + <0 212 IRQ_TYPE_LEVEL_HIGH>, + <0 209 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif6: serial@e800a000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe800a000 64>; + interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>, + <0 215 IRQ_TYPE_LEVEL_HIGH>, + <0 216 IRQ_TYPE_LEVEL_HIGH>, + <0 213 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif7: serial@e800a800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe800a800 64>; + interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>, + <0 219 IRQ_TYPE_LEVEL_HIGH>, + <0 220 IRQ_TYPE_LEVEL_HIGH>, + <0 217 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; + clock-names = "sci_ick"; + status = "disabled"; + }; + spi0: spi@e800c800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800c800 0x24>; @@ -123,6 +331,7 @@ <0 239 IRQ_TYPE_LEVEL_HIGH>, <0 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI0>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -136,6 +345,7 @@ <0 242 IRQ_TYPE_LEVEL_HIGH>, <0 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI1>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -149,6 +359,7 @@ <0 245 IRQ_TYPE_LEVEL_HIGH>, <0 246 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI2>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -162,6 +373,7 @@ <0 248 IRQ_TYPE_LEVEL_HIGH>, <0 249 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI3>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -175,6 +387,7 @@ <0 251 IRQ_TYPE_LEVEL_HIGH>, <0 252 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI4>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 62d0211bd192..82c5ac825386 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -55,7 +55,6 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>, @@ -95,7 +94,6 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, <0 33 IRQ_TYPE_LEVEL_HIGH>, <0 34 IRQ_TYPE_LEVEL_HIGH>, @@ -136,7 +134,6 @@ dma0: dma-controller@e6700020 { compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; - interrupt-parent = <&gic>; interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH 0 200 IRQ_TYPE_LEVEL_HIGH 0 201 IRQ_TYPE_LEVEL_HIGH @@ -171,7 +168,6 @@ compatible = "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; - interrupt-parent = <&gic>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; @@ -180,7 +176,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -190,7 +185,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -200,7 +194,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -210,7 +203,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -220,7 +212,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -230,7 +221,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -240,7 +230,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -250,7 +239,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -260,7 +248,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -268,7 +255,6 @@ mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupt-parent = <&gic>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; @@ -277,7 +263,6 @@ mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupt-parent = <&gic>; interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; @@ -309,7 +294,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; @@ -318,7 +302,6 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; @@ -327,7 +310,6 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 95a849bf921f..486007d7ffe4 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "r8a7740.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> @@ -77,26 +78,26 @@ power-key { gpios = <&pfc 99 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "SW3"; gpio-key,wakeup; }; back-key { gpios = <&pfc 100 GPIO_ACTIVE_LOW>; - linux,code = <158>; + linux,code = <KEY_BACK>; label = "SW4"; }; menu-key { gpios = <&pfc 97 GPIO_ACTIVE_LOW>; - linux,code = <139>; + linux,code = <KEY_MENU>; label = "SW5"; }; home-key { gpios = <&pfc 98 GPIO_ACTIVE_LOW>; - linux,code = <102>; + linux,code = <KEY_HOME>; label = "SW6"; }; }; @@ -117,6 +118,16 @@ }; }; + i2c2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */ + &pfc 91 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + backlight { compatible = "pwm-backlight"; pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; @@ -147,6 +158,18 @@ }; }; +ðer { + pinctrl-0 = <ðer_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy0>; + status = "ok"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c0 { status = "okay"; touchscreen@55 { @@ -166,10 +189,23 @@ }; }; +&i2c2 { + status = "okay"; + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; +}; + &pfc { pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; + ether_pins: ether { + renesas,groups = "gether_mii", "gether_int"; + renesas,function = "gether"; + }; + scifa1_pins: serial1 { renesas,groups = "scifa1_data"; renesas,function = "scifa1"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 2551e9438d35..55d29f4d2ed6 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7740"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -22,6 +23,7 @@ compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; + clock-frequency = <800000000>; }; }; @@ -48,7 +50,6 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -69,7 +70,6 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -90,7 +90,6 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -111,7 +110,6 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -122,12 +120,23 @@ 0 149 IRQ_TYPE_LEVEL_HIGH>; }; + ether: ethernet@e9a00000 { + compatible = "renesas,gether-r8a7740"; + reg = <0xe9a00000 0x800>, + <0xe9a01800 0x800>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */ + phy-mode = "mii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@fff20000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH 0 202 IRQ_TYPE_LEVEL_HIGH 0 203 IRQ_TYPE_LEVEL_HIGH @@ -138,9 +147,8 @@ i2c1: i2c@e6c20000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH 0 71 IRQ_TYPE_LEVEL_HIGH 0 72 IRQ_TYPE_LEVEL_HIGH @@ -173,9 +181,8 @@ }; mmcif0: mmc@e6bd0000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH 0 57 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -184,7 +191,6 @@ sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH 0 118 IRQ_TYPE_LEVEL_HIGH 0 119 IRQ_TYPE_LEVEL_HIGH>; @@ -196,7 +202,6 @@ sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH 0 122 IRQ_TYPE_LEVEL_HIGH 0 123 IRQ_TYPE_LEVEL_HIGH>; @@ -208,7 +213,6 @@ sdhi2: sd@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH 0 126 IRQ_TYPE_LEVEL_HIGH 0 127 IRQ_TYPE_LEVEL_HIGH>; @@ -219,9 +223,8 @@ sh_fsi2: sound@fe1f0000 { #sound-dai-cells = <1>; - compatible = "renesas,sh_fsi2"; + compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; reg = <0xfe1f0000 0x400>; - interrupt-parent = <&gic>; interrupts = <0 9 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 06cda19dac6a..f76f6ec01e19 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -109,4 +109,18 @@ pinctrl-0 = <&hspi0_pins>; pinctrl-names = "default"; status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl008k"; + reg = <0>; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partition@0 { + label = "data(spi)"; + reg = <0x00000000 0x00100000>; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 85c5b3b99f5e..3af0a2187493 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -20,6 +20,7 @@ / { compatible = "renesas,r8a7778"; + interrupt-parent = <&gic>; cpus { cpu@0 { @@ -52,7 +53,6 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupt-parent = <&gic>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -63,7 +63,6 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -75,7 +74,6 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -87,7 +85,6 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -99,7 +96,6 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -111,7 +107,6 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -130,7 +125,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -140,7 +134,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -150,7 +143,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -160,7 +152,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -168,7 +159,6 @@ mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -176,7 +166,6 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -186,7 +175,6 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -196,7 +184,6 @@ sdhi2: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -204,26 +191,29 @@ }; hspi0: spi@fffc7000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi1: spi@fffc8000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi2: spi@fffc6000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 76f5eef7d1cc..b27c6373ff4d 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -45,6 +45,7 @@ phy-mode = "mii"; interrupt-parent = <&irqpin0>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index d0561d4c7c46..b517c8e6b420 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -15,6 +15,7 @@ / { compatible = "renesas,r8a7779"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -59,7 +60,6 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -71,7 +71,6 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -83,7 +82,6 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -95,7 +93,6 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -107,7 +104,6 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -119,7 +115,6 @@ gpio5: gpio@ffc45000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -131,7 +126,6 @@ gpio6: gpio@ffc46000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -150,7 +144,6 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupt-parent = <&gic>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -163,7 +156,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -173,7 +165,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -183,7 +174,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -193,7 +183,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -211,14 +200,12 @@ sata: sata@fc600000 { compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; - interrupt-parent = <&gic>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; }; sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -228,7 +215,6 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -238,7 +224,6 @@ sdhi2: sd@ffe4e000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -248,7 +233,6 @@ sdhi3: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -256,26 +240,29 @@ }; hspi0: spi@fffc7000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi1: spi@fffc8000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi2: spi@fffc6000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index d01048ab3e77..dd2fe46073f2 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -12,11 +12,17 @@ /dts-v1/; #include "r8a7790.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Lager"; compatible = "renesas,lager", "renesas,r8a7790"; + aliases { + serial6 = &scif0; + serial7 = &scif1; + }; + chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -36,6 +42,39 @@ #size-cells = <1>; }; + gpio_keys { + compatible = "gpio-keys"; + + button@1 { + linux,code = <KEY_1>; + label = "SW2-1"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + button@2 { + linux,code = <KEY_2>; + label = "SW2-2"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + }; + button@3 { + linux,code = <KEY_3>; + label = "SW2-3"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + }; + button@4 { + linux,code = <KEY_4>; + label = "SW2-4"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + }; + }; + leds { compatible = "gpio-leds"; led6 { @@ -112,7 +151,7 @@ }; &pfc { - pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; + pinctrl-0 = <&du_pins>; pinctrl-names = "default"; du_pins: du { @@ -155,10 +194,16 @@ renesas,function = "mmc1"; }; - qspi_pins: spi { + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + msiof1_pins: spi2 { + renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", + "msiof1_tx"; + renesas,function = "msiof1"; + }; }; ðer { @@ -173,6 +218,7 @@ reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; }; }; @@ -190,7 +236,7 @@ status = "okay"; }; -&spi { +&qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -202,6 +248,8 @@ compatible = "spansion,s25fl512s"; reg = <0>; spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; partition@0 { @@ -221,6 +269,35 @@ }; }; +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&msiof1 { + pinctrl-0 = <&msiof1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic: pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 618e5b537eaf..7ff29601f962 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -24,6 +24,15 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + i2c4 = &iic0; + i2c5 = &iic1; + i2c6 = &iic2; + i2c7 = &iic3; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; + spi4 = &msiof3; }; cpus { @@ -108,6 +117,7 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; }; gpio1: gpio@e6051000 { @@ -119,6 +129,7 @@ gpio-ranges = <&pfc 0 32 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; }; gpio2: gpio@e6052000 { @@ -130,6 +141,7 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; }; gpio3: gpio@e6053000 { @@ -141,6 +153,7 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; }; gpio4: gpio@e6054000 { @@ -152,6 +165,7 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; }; gpio5: gpio@e6055000 { @@ -163,6 +177,7 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; }; thermal@e61f0000 { @@ -231,6 +246,46 @@ status = "disabled"; }; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC0>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC1>; + status = "disabled"; + }; + + iic2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x425>; + interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC2>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; + status = "disabled"; + }; + mmcif0: mmcif@ee200000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; @@ -673,7 +728,7 @@ renesas,clock-indices = < R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 - R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY + R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", @@ -697,18 +752,19 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, - <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, - <&mmc0_clk>, <&rclk_clk>; + clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, + <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, + <&hp_clk>, <&hp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 - R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 - R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1 + R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 + R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1 >; clock-output-names = - "tpu0", "mmcif1", "sdhi3", "sdhi2", - "sdhi1", "sdhi0", "mmcif0", "cmt1"; + "iic2", "tpu0", "mmcif1", "sdhi3", + "sdhi2", "sdhi1", "sdhi0", "mmcif0", + "iic0", "iic1", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -752,20 +808,25 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD - R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 - R8A7790_CLK_I2C0 + R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3 + R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0 + R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS + R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0 >; clock-output-names = - "rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0"; + "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", + "rcan1", "rcan0", "qspi_mod", "iic3", + "i2c3", "i2c2", "i2c1", "i2c0"; }; }; - spi: spi@e6b10000 { + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; @@ -775,4 +836,44 @@ #size-cells = <0>; status = "disabled"; }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c90000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6c90000 0 0x0064>; + interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts new file mode 100644 index 000000000000..cc6d992e8db2 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -0,0 +1,219 @@ +/* + * Device Tree Source for the Henninger board + * + * Copyright (C) 2014 Renesas Solutions Corp. + * Copyright (C) 2014 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Henninger"; + compatible = "renesas,henninger", "renesas,r8a7791"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi2: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + + msiof0_pins: spi1 { + renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + "msiof0_tx"; + renesas,function = "msiof0"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "ok"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index de1b6977c69a..05d44f9b202f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -13,11 +13,17 @@ /dts-v1/; #include "r8a7791.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Koelsch"; compatible = "renesas,koelsch", "renesas,r8a7791"; + aliases { + serial6 = &scif0; + serial7 = &scif1; + }; + chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -40,51 +46,79 @@ gpio-keys { compatible = "gpio-keys"; + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + gpio-key,wakeup; + debounce-interval = <20>; + }; key-a { gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - linux,code = <30>; + linux,code = <KEY_A>; label = "SW30"; gpio-key,wakeup; debounce-interval = <20>; }; key-b { gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; - linux,code = <48>; + linux,code = <KEY_B>; label = "SW31"; gpio-key,wakeup; debounce-interval = <20>; }; key-c { gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; - linux,code = <46>; + linux,code = <KEY_C>; label = "SW32"; gpio-key,wakeup; debounce-interval = <20>; }; key-d { gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; - linux,code = <32>; + linux,code = <KEY_D>; label = "SW33"; gpio-key,wakeup; debounce-interval = <20>; }; key-e { gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; - linux,code = <18>; + linux,code = <KEY_E>; label = "SW34"; gpio-key,wakeup; debounce-interval = <20>; }; key-f { gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; - linux,code = <33>; + linux,code = <KEY_F>; label = "SW35"; gpio-key,wakeup; debounce-interval = <20>; }; key-g { gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; - linux,code = <34>; + linux,code = <KEY_G>; label = "SW36"; gpio-key,wakeup; debounce-interval = <20>; @@ -195,11 +229,16 @@ }; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; +}; + &pfc { - pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; + pinctrl-0 = <&du_pins>; pinctrl-names = "default"; - i2c2_pins: i2c { + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; }; @@ -244,10 +283,16 @@ renesas,function = "sdhi2"; }; - qspi_pins: spi { + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + msiof0_pins: spi1 { + renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + "msiof0_tx"; + renesas,function = "msiof0"; + }; }; ðer { @@ -262,6 +307,7 @@ reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; }; }; @@ -269,6 +315,20 @@ status = "okay"; }; +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; @@ -301,7 +361,7 @@ status = "okay"; }; -&spi { +&qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -313,6 +373,8 @@ compatible = "spansion,s25fl512s"; reg = <0>; spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; partition@0 { @@ -331,3 +393,18 @@ }; }; }; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic: pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 46181708e59c..8d7ffaeff6e0 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -27,6 +27,13 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; }; cpus { @@ -37,14 +44,14 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; - clock-frequency = <1300000000>; + clock-frequency = <1500000000>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; - clock-frequency = <1300000000>; + clock-frequency = <1500000000>; }; }; @@ -69,6 +76,7 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; }; gpio1: gpio@e6051000 { @@ -80,6 +88,7 @@ gpio-ranges = <&pfc 0 32 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; }; gpio2: gpio@e6052000 { @@ -91,6 +100,7 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; }; gpio3: gpio@e6053000 { @@ -102,6 +112,7 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; }; gpio4: gpio@e6054000 { @@ -113,6 +124,7 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; }; gpio5: gpio@e6055000 { @@ -124,6 +136,7 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; }; gpio6: gpio@e6055400 { @@ -135,6 +148,7 @@ gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; }; gpio7: gpio@e6055800 { @@ -146,6 +160,7 @@ gpio-ranges = <&pfc 0 224 26>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; }; thermal@e61f0000 { @@ -180,6 +195,7 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -231,6 +247,7 @@ }; i2c5: i2c@e6528000 { + /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; @@ -240,6 +257,37 @@ status = "disabled"; }; + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC0>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC1>; + status = "disabled"; + }; + pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; @@ -249,7 +297,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; status = "disabled"; @@ -258,7 +305,6 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; status = "disabled"; @@ -267,7 +313,6 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; status = "disabled"; @@ -688,7 +733,7 @@ renesas,clock-indices = < R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 - R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY + R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", @@ -712,15 +757,16 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, - <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>; + clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, + <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 - R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 + R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 + R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1 >; clock-output-names = - "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1"; + "tpu0", "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "i2c7", "i2c8", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -733,19 +779,19 @@ mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 + R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0 R8A7791_CLK_LVDS0 >; clock-output-names = - "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0"; }; mstp8_clks: mstp8_clks@e6150990 { @@ -764,18 +810,23 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, + <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD - R8A7791_CLK_I2C5 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 - R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 + R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 + R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 + R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 + R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2 + R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 >; clock-output-names = - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", - "i2c2", "i2c1", "i2c0"; + "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", + "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -789,7 +840,7 @@ }; }; - spi: spi@e6b10000 { + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; @@ -799,4 +850,34 @@ #size-cells = <0>; status = "disabled"; }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 035df4053c21..afb327322a4a 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -18,6 +18,7 @@ / { model = "bq Curie 2"; + compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; memory { reg = <0x60000000 0x40000000>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 4d4dfbb59f4b..4387cfd420ba 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; @@ -79,7 +80,7 @@ pinctrl@20008000 { compatible = "rockchip,rk3066a-pinctrl"; - reg = <0x20008000 0x150>; + rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 3ba1968a70ab..a5eee55079cb 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -17,6 +17,7 @@ / { model = "Radxa Rock"; + compatible = "radxa,rock", "rockchip,rk3188"; memory { reg = <0x60000000 0x80000000>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ed9a70af3e3f..238c996d4a7f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; @@ -75,17 +76,16 @@ pinctrl@20008000 { compatible = "rockchip,rk3188-pinctrl"; - reg = <0x20008000 0xa0>, - <0x20008164 0x1a0>; - reg-names = "base", "pull"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmu>; + #address-cells = <1>; #size-cells = <1>; ranges; gpio0: gpio0@0x2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>, - <0x20004064 0x8>; + reg = <0x2000a000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_gates8 9>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 26e5a968d49d..2adf1cc9e85d 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -31,11 +31,16 @@ reg = <0x1013c000 0x100>; }; - pmu@20004000 { - compatible = "rockchip,rk3066-pmu"; + pmu: pmu@20004000 { + compatible = "rockchip,rk3066-pmu", "syscon"; reg = <0x20004000 0x100>; }; + grf: grf@20008000 { + compatible = "syscon"; + reg = <0x20008000 0x200>; + }; + gic: interrupt-controller@1013d000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 59594cf15998..ea92fd69529a 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,6 +19,19 @@ reg = <0x30000000 0x4000000>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + xti: xti { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; + }; + }; + serial@50000000 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index e6555bdd81b8..955e4a4f8c31 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/s3c2443.h> #include "s3c24xx.dtsi" #include "s3c2416-pinctrl.dtsi" @@ -28,26 +29,53 @@ compatible = "samsung,s3c2416-irq"; }; + clocks: clock-controller@0x4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; + timer@51000000 { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; + }; + serial@50000000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; }; serial@50004000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; }; serial@50008000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; }; serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; status = "disabled"; }; @@ -55,6 +83,10 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks MUX_HSMMC0>; status = "disabled"; }; @@ -62,18 +94,28 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks MUX_HSMMC1>; status = "disabled"; }; watchdog@53000000 { interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; rtc@57000000 { compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; }; i2c@54000000 { compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index a106b0872910..e0b15a6e8897 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -58,6 +58,18 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; @@ -113,6 +125,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(14)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; clocks = <&ssc0_clk>; @@ -231,6 +246,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(4)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; clocks = <&ssc1_clk>; @@ -577,6 +595,84 @@ }; }; + pwm0 { + pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 { + atmel,pins = + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */ + }; + pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */ + }; + pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */ + }; + pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 { + atmel,pins = + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */ + }; + + pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 { + atmel,pins = + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */ + }; + pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */ + }; + pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 { + atmel,pins = + <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */ + }; + pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */ + }; + pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 { + atmel,pins = + <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */ + }; + pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */ + }; + + pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */ + }; + pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 { + atmel,pins = + <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */ + }; + pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 { + atmel,pins = + <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */ + }; + pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */ + }; + + pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */ + }; + pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 { + atmel,pins = + <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */ + }; + pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 { + atmel,pins = + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */ + }; + pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 { + atmel,pins = + <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */ + }; + }; + spi0 { pinctrl_spi0: spi0-0 { atmel,pins = @@ -749,18 +845,29 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; #clock-cells = <0>; - clock-frequency = <32768>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; }; - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; interrupt-parent = <&pmc>; interrupts = <AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; }; plla: pllack { @@ -1089,6 +1196,32 @@ status = "disabled"; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f55ed072c8e6..b0b1331c1974 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -18,6 +18,14 @@ reg = <0x20000000 0x20000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { spi0: spi@f0004000 { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index dba739b6ef36..306eef0f97ef 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -32,6 +32,10 @@ }; }; + ssc0: ssc@f0008000 { + atmel,clk-from-rk-pin; + }; + /* * i2c0 conflicts with ISI: * disable it to allow the use of ISI @@ -156,7 +160,7 @@ }; sound { - compatible = "atmel,sama5d3ek-wm8904"; + compatible = "atmel,asoc-wm8904"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; @@ -166,9 +170,12 @@ "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", + "MICBIAS", "IN1L", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; atmel,audio-codec = <&wm8904>; + + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index eb8886b535e4..a99171c8a782 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "sh73a0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -112,43 +113,43 @@ back-key { gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; - linux,code = <158>; + linux,code = <KEY_BACK>; label = "SW3"; }; right-key { gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; - linux,code = <106>; + linux,code = <KEY_RIGHT>; label = "SW2-R"; }; left-key { gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; - linux,code = <105>; + linux,code = <KEY_LEFT>; label = "SW2-L"; }; enter-key { gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; - linux,code = <28>; + linux,code = <KEY_ENTER>; label = "SW2-P"; }; up-key { gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; - linux,code = <103>; + linux,code = <KEY_UP>; label = "SW2-U"; }; down-key { gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; - linux,code = <108>; + linux,code = <KEY_DOWN>; label = "SW2-D"; }; home-key { gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; - linux,code = <102>; + linux,code = <KEY_HOME>; label = "SW1"; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 56fc214e6d2c..4676f25e87a7 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -15,7 +15,8 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/reset/altr,rst-mgr.h> / { #address-cells = <1>; @@ -75,7 +76,14 @@ pdma: pdma@ffe01000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xffe01000 0x1000>; - interrupts = <0 180 4>; + interrupts = <0 104 4>, + <0 105 4>, + <0 106 4>, + <0 107 4>, + <0 108 4>, + <0 109 4>, + <0 110 4>, + <0 111 4>; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -84,6 +92,22 @@ }; }; + can0: can@ffc00000 { + compatible = "bosch,d_can"; + reg = <0xffc00000 0x1000>; + interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; + clocks = <&can0_clk>; + status = "disabled"; + }; + + can1: can@ffc01000 { + compatible = "bosch,d_can"; + reg = <0xffc01000 0x1000>; + interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>; + clocks = <&can1_clk>; + status = "disabled"; + }; + clkmgr@ffd04000 { compatible = "altr,clk-mgr"; reg = <0xffd04000 0x1000>; @@ -124,7 +148,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <2>; + div-reg = <0xe0 0 9>; reg = <0x48>; }; @@ -132,7 +156,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <4>; + div-reg = <0xe4 0 9>; reg = <0x4C>; }; @@ -140,7 +164,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <4>; + div-reg = <0xe8 0 9>; reg = <0x50>; }; @@ -460,6 +484,8 @@ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ clocks = <&emac0_clk>; clock-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -472,9 +498,111 @@ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ clocks = <&emac1_clk>; clock-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>; + reset-names = "stmmaceth"; + status = "disabled"; + }; + + i2c0: i2c@ffc04000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc04000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 158 0x4>; + status = "disabled"; + }; + + i2c1: i2c@ffc05000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc05000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 159 0x4>; status = "disabled"; }; + i2c2: i2c@ffc06000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc06000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 160 0x4>; + status = "disabled"; + }; + + i2c3: i2c@ffc07000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc07000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 161 0x4>; + status = "disabled"; + }; + + gpio@ff708000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff708000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio0: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <29>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 164 4>; + }; + }; + + gpio@ff709000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff709000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio1: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <29>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 165 4>; + }; + }; + + gpio@ff70a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff70a000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio2: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <27>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 166 4>; + }; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; @@ -508,24 +636,32 @@ compatible = "snps,dw-apb-timer"; interrupts = <0 167 4>; reg = <0xffc08000 0x1000>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer1: timer1@ffc09000 { compatible = "snps,dw-apb-timer"; interrupts = <0 168 4>; reg = <0xffc09000 0x1000>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; interrupts = <0 169 4>; reg = <0xffd00000 0x1000>; + clocks = <&osc1>; + clock-names = "timer"; }; timer3: timer3@ffd01000 { compatible = "snps,dw-apb-timer"; interrupts = <0 170 4>; reg = <0xffd01000 0x1000>; + clocks = <&osc1>; + clock-names = "timer"; }; uart0: serial0@ffc02000 { @@ -534,6 +670,7 @@ interrupts = <0 162 4>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; }; uart1: serial1@ffc03000 { @@ -542,13 +679,58 @@ interrupts = <0 163 4>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; }; - rstmgr@ffd05000 { + rst: rstmgr@ffd05000 { compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; }; + usbphy0: usbphy@0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "okay"; + }; + + usb0: usb@ffb00000 { + compatible = "snps,dwc2"; + reg = <0xffb00000 0xffff>; + interrupts = <0 125 4>; + clocks = <&usb_mp_clk>; + clock-names = "otg"; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb1: usb@ffb40000 { + compatible = "snps,dwc2"; + reg = <0xffb40000 0xffff>; + interrupts = <0 128 4>; + clocks = <&usb_mp_clk>; + clock-names = "otg"; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + watchdog0: watchdog@ffd02000 { + compatible = "snps,dw-wdt"; + reg = <0xffd02000 0x1000>; + interrupts = <0 171 4>; + clocks = <&osc1>; + status = "disabled"; + }; + + watchdog1: watchdog@ffd03000 { + compatible = "snps,dw-wdt"; + reg = <0xffd03000 0x1000>; + interrupts = <0 172 4>; + clocks = <&osc1>; + status = "disabled"; + }; + sysmgr: sysmgr@ffd08000 { compatible = "altr,sys-mgr", "syscon"; reg = <0xffd08000 0x4000>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 6c87b7070ca7..12d1c2ccaf5b 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { soc { @@ -38,32 +38,8 @@ }; }; - serial0@ffc02000 { - clock-frequency = <100000000>; - }; - - serial1@ffc03000 { - clock-frequency = <100000000>; - }; - sysmgr@ffd08000 { cpu1-start-addr = <0xffd080c4>; }; - - timer0@ffc08000 { - clock-frequency = <100000000>; - }; - - timer1@ffc09000 { - clock-frequency = <100000000>; - }; - - timer2@ffd00000 { - clock-frequency = <25000000>; - }; - - timer3@ffd01000 { - clock-frequency = <25000000>; - }; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index a87ee1c07661..d532d171e391 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_arria5.dtsi" +#include "socfpga_arria5.dtsi" / { model = "Altera SOCFPGA Arria V SoC Development Kit"; @@ -59,3 +59,22 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index ca41b0ebf461..bf511828729f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -16,7 +16,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { soc { @@ -45,30 +45,6 @@ status = "okay"; }; - timer0@ffc08000 { - clock-frequency = <100000000>; - }; - - timer1@ffc09000 { - clock-frequency = <100000000>; - }; - - timer2@ffd00000 { - clock-frequency = <25000000>; - }; - - timer3@ffd01000 { - clock-frequency = <25000000>; - }; - - serial0@ffc02000 { - clock-frequency = <100000000>; - }; - - serial1@ffc03000 { - clock-frequency = <100000000>; - }; - sysmgr@ffd08000 { cpu1-start-addr = <0xffd080c4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index ae16d975196d..45de1514af0a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_cyclone5.dtsi" +#include "socfpga_cyclone5.dtsi" / { model = "Altera SOCFPGA Cyclone V SoC Development Kit"; @@ -52,3 +52,22 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index b79e2a2bf175..d26f155f5fd9 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_cyclone5.dtsi" +#include "socfpga_cyclone5.dtsi" / { model = "Terasic SoCkit"; @@ -52,3 +52,7 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts new file mode 100644 index 000000000000..a1814b457450 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "EBV SOCrates"; + compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; +}; + +&gmac1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rtc: rtc@68 { + compatible = "stm,m41t82"; + reg = <0x68>; + }; +}; + +&mmc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 87d6f759a9c1..09792b411110 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -16,7 +16,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { model = "Altera SOCFPGA VT"; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index 229508750890..651c56d400a4 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -38,8 +38,8 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; + cap-sd-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; cd-gpios = <&gpio7 6 0x4>; // 230 @@ -63,7 +63,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 6cb9b68e2188..bf8f0eddc2c0 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -116,8 +116,15 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; + cap-sd-highspeed; + cap-mmc-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + full-pwr-cycle; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-cmd; + st,sig-pin-fbclk; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; @@ -132,6 +139,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; + non-removable; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi1_default_mode>; pinctrl-1 = <&sdi1_sleep_mode>; @@ -144,7 +152,9 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; + non-removable; + vmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi2_default_mode>; pinctrl-1 = <&sdi2_sleep_mode>; @@ -157,7 +167,8 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; + non-removable; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi4_default_mode>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 5acc0449676a..d316c955bd5f 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -840,8 +840,8 @@ interrupts = <22>; max-frequency = <48000000>; bus-width = <4>; - mmc-cap-mmc-highspeed; - mmc-cap-sd-highspeed; + cap-mmc-highspeed; + cap-sd-highspeed; cd-gpios = <&gpio3 15 0x1>; cd-inverted; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index a2f632d0be2a..474ef83229cd 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -156,7 +156,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; @@ -195,7 +195,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi4_default_mode>; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 6fe688e9e4da..82a661677e97 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -442,8 +442,8 @@ clock-names = "apb_pclk", "mclk"; max-frequency = <24000000>; bus-width = <4>; // SD-card slot - mmc-cap-mmc-highspeed; - mmc-cap-sd-highspeed; + cap-mmc-highspeed; + cap-sd-highspeed; cd-gpios = <&gpio 12 0x4>; cd-inverted; vmmc-supply = <&ab3100_ldo_g_reg>; diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts new file mode 100644 index 000000000000..fe69f92e5f82 --- /dev/null +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "stih407.dtsi" +/ { + model = "STiH407 B2120"; + compatible = "st,stih407-b2120", "st,stih407"; + + chosen { + bootargs = "console=ttyAS0,115200"; + linux,stdout-path = &sbc_serial0; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + aliases { + ttyAS0 = &sbc_serial0; + }; + + soc { + sbc_serial0: serial@9530000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <2>; + label = "Front Panel LED"; + gpios = <&pio4 1 0>; + linux,default-trigger = "heartbeat"; + }; + green { + #gpio-cells = <2>; + gpios = <&pio1 3 0>; + default-state = "off"; + }; + }; + + i2c@9842000 { + status = "okay"; + }; + + i2c@9843000 { + status = "okay"; + }; + + i2c@9844000 { + status = "okay"; + }; + + i2c@9845000 { + status = "okay"; + }; + + i2c@9540000 { + status = "okay"; + }; + + /* SSC11 to HDMI */ + i2c@9541000 { + status = "okay"; + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi new file mode 100644 index 000000000000..800f46f009f3 --- /dev/null +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 STMicroelectronics R&D Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/ { + clocks { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: arm-periph-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <600000000>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + clk_ext2f_a9: clockgen-c0@13 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + clock-output-names = "clk-s-icn-reg-0"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi new file mode 100644 index 000000000000..402844cb3152 --- /dev/null +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -0,0 +1,615 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "st-pincfg.h" +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + + aliases { + /* 0-5: PIO_SBC */ + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio5; + /* 10-19: PIO_FRONT0 */ + gpio6 = &pio10; + gpio7 = &pio11; + gpio8 = &pio12; + gpio9 = &pio13; + gpio10 = &pio14; + gpio11 = &pio15; + gpio12 = &pio16; + gpio13 = &pio17; + gpio14 = &pio18; + gpio15 = &pio19; + /* 20: PIO_FRONT1 */ + gpio16 = &pio20; + /* 30-35: PIO_REAR */ + gpio17 = &pio30; + gpio18 = &pio31; + gpio19 = &pio32; + gpio20 = &pio33; + gpio21 = &pio34; + gpio22 = &pio35; + /* 40-42: PIO_FLASH */ + gpio23 = &pio40; + gpio24 = &pio41; + gpio25 = &pio42; + }; + + soc { + pin-controller-sbc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-sbc-pinctrl"; + st,syscfg = <&syscfg_sbc>; + reg = <0x0961f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09610000 0x6000>; + + pio0: gpio@09610000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO0"; + }; + pio1: gpio@09611000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO1"; + }; + pio2: gpio@09612000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO2"; + }; + pio3: gpio@09613000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO3"; + }; + pio4: gpio@09614000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO4"; + }; + + pio5: gpio@09615000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO5"; + }; + + rc { + pinctrl_ir: ir0 { + st,pins { + ir = <&pio4 0 ALT2 IN>; + }; + }; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0 { + pinctrl_sbc_serial0: sbc_serial0-0 { + st,pins { + tx = <&pio3 4 ALT1 OUT>; + rx = <&pio3 5 ALT1 IN>; + }; + }; + }; + /* SBC_ASC1 - UART11 */ + sbc_serial1 { + pinctrl_sbc_serial1: sbc_serial1-0 { + st,pins { + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; + }; + }; + }; + + i2c10 { + pinctrl_i2c10_default: i2c10-default { + st,pins { + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; + }; + }; + }; + + i2c11 { + pinctrl_i2c11_default: i2c11-default { + st,pins { + sda = <&pio5 1 ALT1 BIDIR>; + scl = <&pio5 0 ALT1 BIDIR>; + }; + }; + }; + + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&pio4 0 ALT6 IN>; + keyin1 = <&pio4 5 ALT4 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio4 6 ALT4 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; + }; + }; + }; + + gmac1 { + /* + * Almost all the boards based on STiH407 SoC have an embedded + * switch where the mdio/mdc have been used for managing the SMI + * iface via I2C. For this reason these lines can be allocated + * by using dedicated configuration (in case of there will be a + * standard PHY transceiver on-board). + */ + pinctrl_rgmii1: rgmii1-0 { + st,pins { + + txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; + rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>; + clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>; + }; + }; + + pinctrl_rgmii1_mdio: rgmii1-mdio { + st,pins { + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + }; + }; + + pinctrl_mii1: mii1 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + + mdio = <&pio1 0 ALT1 OUT BYPASS 1500>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; + }; + }; + }; + + pwm1 { + pinctrl_pwm1_chan0_default: pwm1-0-default { + st,pins { + pwm-out = <&pio3 0 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan1_default: pwm1-1-default { + st,pins { + pwm-out = <&pio4 4 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan2_default: pwm1-2-default { + st,pins { + pwm-out = <&pio4 6 ALT3 OUT>; + }; + }; + pinctrl_pwm1_chan3_default: pwm1-3-default { + st,pins { + pwm-out = <&pio4 7 ALT3 OUT>; + }; + }; + }; + }; + + pin-controller-front0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0x0920f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09200000 0x10000>; + + pio10: pio@09200000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO10"; + }; + pio11: pio@09201000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO11"; + }; + pio12: pio@09202000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO12"; + }; + pio13: pio@09203000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO13"; + }; + pio14: pio@09204000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO14"; + }; + pio15: pio@09205000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO15"; + }; + pio16: pio@09206000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x100>; + st,bank-name = "PIO16"; + }; + pio17: pio@09207000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x100>; + st,bank-name = "PIO17"; + }; + pio18: pio@09208000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x100>; + st,bank-name = "PIO18"; + }; + pio19: pio@09209000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x100>; + st,bank-name = "PIO19"; + }; + + /* Comms */ + serial0 { + pinctrl_serial0: serial0-0 { + st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + }; + }; + }; + + serial1 { + pinctrl_serial1: serial1-0 { + st,pins { + tx = <&pio16 0 ALT1 OUT>; + rx = <&pio16 1 ALT1 IN>; + }; + }; + }; + + serial2 { + pinctrl_serial2: serial2-0 { + st,pins { + tx = <&pio15 0 ALT1 OUT>; + rx = <&pio15 1 ALT1 IN>; + }; + }; + }; + + mmc1 { + pinctrl_sd1: sd1-0 { + st,pins { + sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>; + sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>; + sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>; + sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>; + sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>; + sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>; + sd_led = <&pio16 6 ALT6 OUT>; + sd_pwren = <&pio16 7 ALT6 OUT>; + sd_cd = <&pio19 0 ALT6 IN>; + sd_wp = <&pio19 1 ALT6 IN>; + }; + }; + }; + + + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&pio10 6 ALT2 BIDIR>; + scl = <&pio10 5 ALT2 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&pio11 1 ALT2 BIDIR>; + scl = <&pio11 0 ALT2 BIDIR>; + }; + }; + }; + + i2c2 { + pinctrl_i2c2_default: i2c2-default { + st,pins { + sda = <&pio15 6 ALT2 BIDIR>; + scl = <&pio15 5 ALT2 BIDIR>; + }; + }; + }; + + i2c3 { + pinctrl_i2c3_default: i2c3-default { + st,pins { + sda = <&pio18 6 ALT1 BIDIR>; + scl = <&pio18 5 ALT1 BIDIR>; + }; + }; + }; + + spi0 { + pinctrl_spi0_default: spi0-default { + st,pins { + mtsr = <&pio12 6 ALT2 BIDIR>; + mrst = <&pio12 7 ALT2 BIDIR>; + scl = <&pio12 5 ALT2 BIDIR>; + }; + }; + }; + }; + + pin-controller-front1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0x0921f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09210000 0x10000>; + + pio20: pio@09210000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO20"; + }; + }; + + pin-controller-rear { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-rear-pinctrl"; + st,syscfg = <&syscfg_rear>; + reg = <0x0922f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09220000 0x6000>; + + pio30: gpio@09220000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO30"; + }; + pio31: gpio@09221000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO31"; + }; + pio32: gpio@09222000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO32"; + }; + pio33: gpio@09223000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO33"; + }; + pio34: gpio@09224000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO34"; + }; + pio35: gpio@09225000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO35"; + }; + + i2c4 { + pinctrl_i2c4_default: i2c4-default { + st,pins { + sda = <&pio30 1 ALT1 BIDIR>; + scl = <&pio30 0 ALT1 BIDIR>; + }; + }; + }; + + i2c5 { + pinctrl_i2c5_default: i2c5-default { + st,pins { + sda = <&pio34 4 ALT1 BIDIR>; + scl = <&pio34 3 ALT1 BIDIR>; + }; + }; + }; + + usb3 { + pinctrl_usb3: usb3-2 { + st,pins { + usb-oc-detect = <&pio35 4 ALT1 IN>; + usb-pwr-enable = <&pio35 5 ALT1 OUT>; + usb-vbus-valid = <&pio35 6 ALT1 IN>; + }; + }; + }; + + pwm0 { + pinctrl_pwm0_chan0_default: pwm0-0-default { + st,pins { + pwm-out = <&pio31 1 ALT1 OUT>; + }; + }; + }; + }; + + pin-controller-flash { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-flash-pinctrl"; + st,syscfg = <&syscfg_flash>; + reg = <0x0923f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09230000 0x3000>; + + pio40: gpio@09230000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO40"; + }; + pio41: gpio@09231000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO41"; + }; + pio42: gpio@09232000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO42"; + }; + + mmc0 { + pinctrl_mmc0: mmc0-0 { + st,pins { + emmc_clk = <&pio40 6 ALT1 BIDIR>; + emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>; + emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>; + emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>; + emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>; + emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>; + emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>; + emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>; + emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>; + emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi new file mode 100644 index 000000000000..4f9024f19866 --- /dev/null +++ b/arch/arm/boot/dts/stih407.dtsi @@ -0,0 +1,263 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih407-clock.dtsi" +#include "stih407-pinctrl.dtsi" +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + intc: interrupt-controller@08761000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x08761000 0x1000>, <0x08760100 0x100>; + }; + + scu@08760000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x08760000 0x1000>; + }; + + timer@08760200 { + interrupt-parent = <&intc>; + compatible = "arm,cortex-a9-global-timer"; + reg = <0x08760200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&arm_periph_clk>; + }; + + l2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x08762000 0x1000>; + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + cache-unified; + cache-level = <2>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + compatible = "simple-bus"; + + syscfg_sbc: sbc-syscfg@9620000 { + compatible = "st,stih407-sbc-syscfg", "syscon"; + reg = <0x9620000 0x1000>; + }; + + syscfg_front: front-syscfg@9280000 { + compatible = "st,stih407-front-syscfg", "syscon"; + reg = <0x9280000 0x1000>; + }; + + syscfg_rear: rear-syscfg@9290000 { + compatible = "st,stih407-rear-syscfg", "syscon"; + reg = <0x9290000 0x1000>; + }; + + syscfg_flash: flash-syscfg@92a0000 { + compatible = "st,stih407-flash-syscfg", "syscon"; + reg = <0x92a0000 0x1000>; + }; + + syscfg_sbc_reg: fvdp-lite-syscfg@9600000 { + compatible = "st,stih407-sbc-reg-syscfg", "syscon"; + reg = <0x9600000 0x1000>; + }; + + syscfg_core: core-syscfg@92b0000 { + compatible = "st,stih407-core-syscfg", "syscon"; + reg = <0x92b0000 0x1000>; + }; + + syscfg_lpm: lpm-syscfg@94b5100 { + compatible = "st,stih407-lpm-syscfg", "syscon"; + reg = <0x94b5100 0x1000>; + }; + + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial0>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + serial@9831000 { + compatible = "st,asc"; + reg = <0x9831000 0x2c>; + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial1>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + serial@9832000 { + compatible = "st,asc"; + reg = <0x9832000 0x2c>; + interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0: serial@9530000 { + compatible = "st,asc"; + reg = <0x9530000 0x2c>; + interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial0>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + serial@9531000 { + compatible = "st,asc"; + reg = <0x9531000 0x2c>; + interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial1>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + i2c@9840000 { + compatible = "st,comms-ssc4-i2c"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x9840000 0x110>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@9841000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9841000 0x110>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@9842000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9842000 0x110>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + + status = "disabled"; + }; + + i2c@9843000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9843000 0x110>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + + status = "disabled"; + }; + + i2c@9844000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9844000 0x110>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + + status = "disabled"; + }; + + i2c@9845000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9845000 0x110>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + + status = "disabled"; + }; + + + /* SSCs on SBC */ + i2c@9540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9540000 0x110>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + + status = "disabled"; + }; + + i2c@9541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9541000 0x110>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts index d4af53160435..bdfbd3765db2 100644 --- a/arch/arm/boot/dts/stih415-b2000.dts +++ b/arch/arm/boot/dts/stih415-b2000.dts @@ -11,5 +11,5 @@ #include "stih41x-b2000.dtsi" / { model = "STiH415 B2000 Board"; - compatible = "st,stih415", "st,stih415-b2000"; + compatible = "st,stih415-b2000", "st,stih415"; }; diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts index 442b019e9a3a..71903a87bd31 100644 --- a/arch/arm/boot/dts/stih415-b2020.dts +++ b/arch/arm/boot/dts/stih415-b2020.dts @@ -11,5 +11,5 @@ #include "stih41x-b2020.dtsi" / { model = "STiH415 B2020 Board"; - compatible = "st,stih415", "st,stih415-b2020"; + compatible = "st,stih415-b2020", "st,stih415"; }; diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi index d047dbc28d61..3ee34514bc4b 100644 --- a/arch/arm/boot/dts/stih415-clock.dtsi +++ b/arch/arm/boot/dts/stih415-clock.dtsi @@ -5,48 +5,529 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih415-clks.h> + / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator input to SoC */ - CLK_SYSIN: CLK_SYSIN { + clk_sysin: clk-sysin { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <30000000>; }; /* - * ARM Peripheral clock for timers + * ClockGenAs on SASG1 */ - arm_periph_clk: arm_periph_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <500000000>; + clockgen-a@fee62000 { + reg = <0xfee62000 0xb48>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; + }; + + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-osc-prediv"; + }; + + clk_s_a0_hs: clk-s-a0-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 0>, /* PLL0 HS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* Fourth output unused */ + }; + + clk_s_a0_ls: clk-s-a0-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 1>, /* PLL0 LS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-reg-0", + "clk-s-icn-if-0", + "clk-s-icn-reg-lp-0", + "clk-s-emiss", + "clk-s-eth1-phy", + "clk-s-mii-ref-out"; + /* Remaining outputs unused */ + }; + }; + + clockgen-a@fee81000 { + reg = <0xfee81000 0xb48>; + + clk_s_a1_pll: clk-s-a1-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-pll0-hs", + "clk-s-a1-pll0-ls", + "clk-s-a1-pll1"; + }; + + clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-osc-prediv"; + }; + + clk_s_a1_hs: clk-s-a1-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 0>, /* PLL0 HS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "", /* Reserved */ + "", /* Reserved */ + "clk-s-stac-phy", + "clk-s-vtac-tx-phy"; + }; + + clk_s_a1_ls: clk-s-a1-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 1>, /* PLL0 LS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-if-2", + "clk-s-card-mmc", + "clk-s-icn-if-1", + "clk-s-gmac0-phy", + "clk-s-nand-ctrl", + "", /* Reserved */ + "clk-s-mii0-ref-out", + ""; /* clk-s-stac-sys */ + /* Remaining outputs unused */ + }; }; /* - * Bootloader initialized system infrastructure clock for - * serial devices. + * ClockGenAs on MPE41 */ - CLKS_ICN_REG_0: CLKS_ICN_REG_0 { + clockgen-a@fde12000 { + reg = <0xfde12000 0xb50>; + + clk_m_a0_pll0: clk-m-a0-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll0-phi0", + "clk-m-a0-pll0-phi1", + "clk-m-a0-pll0-phi2", + "clk-m-a0-pll0-phi3"; + }; + + clk_m_a0_pll1: clk-m-a0-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll1-phi0", + "clk-m-a0-pll1-phi1", + "clk-m-a0-pll1-phi2", + "clk-m-a0-pll1-phi3"; + }; + + clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-osc-prediv"; + }; + + clk_m_a0_div0: clk-m-a0-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-apb-pm", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-pp-dmu-0", + "clk-m-pp-dmu-1", + "clk-m-icm-disp", + ""; /* Unused */ + }; + + clk_m_a0_div1: clk-m-a0-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "clk-m-a9-ext2f", + "clk-m-st40rt", + "clk-m-st231-dmu-0", + "clk-m-st231-dmu-1", + "clk-m-st231-aud", + "clk-m-st231-gp-0"; + }; + + clk_m_a0_div2: clk-m-a0-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-st231-gp-1", + "clk-m-icn-cpu", + "clk-m-icn-stac", + "clk-m-icn-dmu-0", + "clk-m-icn-dmu-1", + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + + clk_m_a0_div3: clk-m-a0-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-icn-eram", + "clk-m-a9-trace"; + }; + }; + + clockgen-a@fd6db000 { + reg = <0xfd6db000 0xb50>; + + clk_m_a1_pll0: clk-m-a1-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll0-phi0", + "clk-m-a1-pll0-phi1", + "clk-m-a1-pll0-phi2", + "clk-m-a1-pll0-phi3"; + }; + + clk_m_a1_pll1: clk-m-a1-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll1-phi0", + "clk-m-a1-pll1-phi1", + "clk-m-a1-pll1-phi2", + "clk-m-a1-pll1-phi3"; + }; + + clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-osc-prediv"; + }; + + clk_m_a1_div0: clk-m-a1-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-fdma-12", + "clk-m-fdma-10", + "clk-m-fdma-11", + "clk-m-hva-lmi", + "clk-m-proc-sc", + "clk-m-tp", + "clk-m-icn-gpu", + "clk-m-icn-vdp-0"; + }; + + clk_m_a1_div1: clk-m-a1-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-icn-vdp-1", + "clk-m-icn-vdp-2", + "clk-m-icn-vdp-3", + "clk-m-prv-t1-bus", + "clk-m-icn-vdp-4", + "clk-m-icn-reg-10", + "", /* Unused */ + ""; /* clk-m-icn-st231 */ + }; + + clk_m_a1_div2: clk-m-a1-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-fvdp-proc-alt", + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + + clk_m_a1_div3: clk-m-a1-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + }; + + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a0_div1 2>; + clock-div = <2>; + clock-mult = <1>; }; - CLKS_GMAC0_PHY: clockgenA1@7 { + clockgen-a@fd345000 { + reg = <0xfd345000 0xb50>; + + clk_m_a2_pll0: clk-m-a2-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll0-phi0", + "clk-m-a2-pll0-phi1", + "clk-m-a2-pll0-phi2", + "clk-m-a2-pll0-phi3"; + }; + + clk_m_a2_pll1: clk-m-a2-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll1-phi0", + "clk-m-a2-pll1-phi1", + "clk-m-a2-pll1-phi2", + "clk-m-a2-pll1-phi3"; + }; + + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-osc-prediv"; + }; + + clk_m_a2_div0: clk-m-a2-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-vtac-main-phy", + "clk-m-vtac-aux-phy", + "clk-m-stac-phy", + "clk-m-stac-sys", + "", /* clk-m-mpestac-pg */ + "", /* clk-m-mpestac-wc */ + "", /* clk-m-mpevtacaux-pg*/ + ""; /* clk-m-mpevtacmain-pg*/ + }; + + clk_m_a2_div1: clk-m-a2-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* clk-m-mpevtacrx0-wc */ + "", /* clk-m-mpevtacrx1-wc */ + "clk-m-compo-main", + "clk-m-compo-aux", + "clk-m-bdisp-0", + "clk-m-bdisp-1", + "clk-m-icn-bdisp-0", + "clk-m-icn-bdisp-1"; + }; + + clk_m_a2_div2: clk-m-a2-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "", /* clk-m-icn-hqvdp0 */ + "", /* clk-m-icn-hqvdp1 */ + "clk-m-icn-compo", + "", /* clk-m-icn-vdpaux */ + "clk-m-icn-ts", + "clk-m-icn-reg-lp-10", + "clk-m-dcephy-impctrl", + ""; /* Unused */ + }; + + clk_m_a2_div3: clk-m-a2-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = ""; /* Unused */ + /* Remaining outputs unused */ + }; + }; + + /* + * A9 PLL + */ + clockgen-a9@fdde00d8 { + reg = <0xfdde00d8 0x70>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks + */ + clk_m_a9: clk-m-a9@fdde00d8 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLKS_GMAC0_PHY"; + compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0xfdde00d8 0x4>; + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_m_a0_div1 2>, + <&clk_m_a9_ext2f_div2>; }; - CLKS_ETH1_PHY: clockgenA0@7 { + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLKS_ETH1_PHY"; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; }; }; }; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 81df870e5ee6..8509a037ae21 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -102,6 +102,22 @@ }; }; + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&PIO0 2 ALT2 IN>; + keyin1 = <&PIO0 3 ALT2 IN>; + keyin2 = <&PIO0 4 ALT2 IN>; + keyin3 = <&PIO2 6 ALT2 IN>; + + keyout0 = <&PIO1 6 ALT2 OUT>; + keyout1 = <&PIO1 7 ALT2 OUT>; + keyout2 = <&PIO0 6 ALT2 OUT>; + keyout3 = <&PIO2 7 ALT2 OUT>; + }; + }; + }; + sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d89064c20c8a..d6f254f302fe 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -82,7 +82,7 @@ interrupts = <0 197 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; }; /* SBC comms block ASCs in SASG1 */ @@ -91,7 +91,7 @@ status = "disabled"; reg = <0xfe531000 0x2c>; interrupts = <0 210 0>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; }; @@ -100,7 +100,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed40000 0x110>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -113,7 +113,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed41000 0x110>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -126,7 +126,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe540000 0x110>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -139,7 +139,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe541000 0x110>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -170,7 +170,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; clock-names = "stmmaceth"; - clocks = <&CLKS_GMAC0_PHY>; + clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -193,18 +193,30 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; clock-names = "stmmaceth"; - clocks = <&CLKS_ETH1_PHY>; + clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { compatible = "st,comms-irb"; reg = <0xfe518000 0x234>; interrupts = <0 203 0>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; rx-mode = "infrared"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; resets = <&softreset STIH415_IRB_SOFTRESET>; }; + + keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + status = "disabled"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&clk_sysin>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, + <&softreset STIH415_KEYSCAN_SOFTRESET>; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts index a5eb6eee10bf..488e80a5d69d 100644 --- a/arch/arm/boot/dts/stih416-b2000.dts +++ b/arch/arm/boot/dts/stih416-b2000.dts @@ -9,8 +9,7 @@ /dts-v1/; #include "stih416.dtsi" #include "stih41x-b2000.dtsi" - / { - compatible = "st,stih416", "st,stih416-b2000"; model = "STiH416 B2000"; + compatible = "st,stih416-b2000", "st,stih416"; }; diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts new file mode 100644 index 000000000000..ba0fa2caaf18 --- /dev/null +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Lee Jones <lee.jones@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih416.dtsi" +#include "stih41x-b2020.dtsi" +/ { + model = "STiH416 B2020 REV-E"; + compatible = "st,stih416-b2020", "st,stih416"; + + soc { + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <1>; + label = "Front Panel LED"; + gpios = <&PIO4 1>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&PIO1 3>; + default-state = "off"; + }; + }; + + ethernet1: dwmac@fef08000 { + snps,reset-gpio = <&PIO0 7>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 276f28da573a..4e2df66b99ea 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -11,6 +11,5 @@ #include "stih41x-b2020.dtsi" / { model = "STiH416 B2020"; - compatible = "st,stih416", "st,stih416-b2020"; - + compatible = "st,stih416-b2020", "st,stih416"; }; diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi index a6942c75cbbb..5b4fb838cddb 100644 --- a/arch/arm/boot/dts/stih416-clock.dtsi +++ b/arch/arm/boot/dts/stih416-clock.dtsi @@ -6,50 +6,751 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih416-clks.h> + / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator inputs to SoC */ - CLK_SYSIN: CLK_SYSIN { + clk_sysin: clk-sysin { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <30000000>; - clock-output-names = "CLK_SYSIN"; + }; + + /* + * ClockGenAs on SASG2 + */ + clockgen-a@fee62000 { + reg = <0xfee62000 0xb48>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; + }; + + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-osc-prediv"; + }; + + clk_s_a0_hs: clk-s-a0-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 0>, /* PLL0 HS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* Fourth output unused */ + }; + + clk_s_a0_ls: clk-s-a0-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 1>, /* PLL0 LS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-reg-0", + "clk-s-icn-if-0", + "clk-s-icn-reg-lp-0", + "clk-s-emiss", + "clk-s-eth1-phy", + "clk-s-mii-ref-out"; + /* Remaining outputs unused */ + }; + }; + + clockgen-a@fee81000 { + reg = <0xfee81000 0xb48>; + + clk_s_a1_pll: clk-s-a1-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-pll0-hs", + "clk-s-a1-pll0-ls", + "clk-s-a1-pll1"; + }; + + clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-osc-prediv"; + }; + + clk_s_a1_hs: clk-s-a1-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 0>, /* PLL0 HS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "", /* Reserved */ + "", /* Reserved */ + "clk-s-stac-phy", + "clk-s-vtac-tx-phy"; + }; + + clk_s_a1_ls: clk-s-a1-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 1>, /* PLL0 LS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-if-2", + "clk-s-card-mmc-0", + "clk-s-icn-if-1", + "clk-s-gmac0-phy", + "clk-s-nand-ctrl", + "", /* Reserved */ + "clk-s-mii0-ref-out", + "clk-s-stac-sys", + "clk-s-card-mmc-1"; + /* Remaining outputs unused */ + }; + }; + + /* + * ClockGenAs on MPE42 + */ + clockgen-a@fde12000 { + reg = <0xfde12000 0xb50>; + + clk_m_a0_pll0: clk-m-a0-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll0-phi0", + "clk-m-a0-pll0-phi1", + "clk-m-a0-pll0-phi2", + "clk-m-a0-pll0-phi3"; + }; + + clk_m_a0_pll1: clk-m-a0-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll1-phi0", + "clk-m-a0-pll1-phi1", + "clk-m-a0-pll1-phi2", + "clk-m-a0-pll1-phi3"; + }; + + clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-osc-prediv"; + }; + + clk_m_a0_div0: clk-m-a0-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "clk-m-fdma-12", + "", /* Unused */ + "clk-m-pp-dmu-0", + "clk-m-pp-dmu-1", + "clk-m-icm-lmi", + "clk-m-vid-dmu-0"; + }; + + clk_m_a0_div1: clk-m-a0-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-vid-dmu-1", + "", /* Unused */ + "clk-m-a9-ext2f", + "clk-m-st40rt", + "clk-m-st231-dmu-0", + "clk-m-st231-dmu-1", + "clk-m-st231-aud", + "clk-m-st231-gp-0"; + }; + + clk_m_a0_div2: clk-m-a0-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-st231-gp-1", + "clk-m-icn-cpu", + "clk-m-icn-stac", + "clk-m-tx-icn-dmu-0", + "clk-m-tx-icn-dmu-1", + "clk-m-tx-icn-ts", + "clk-m-icn-vdp-0", + "clk-m-icn-vdp-1"; + }; + + clk_m_a0_div3: clk-m-a0-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-icn-vp8", + "", /* Unused */ + "clk-m-icn-reg-11", + "clk-m-a9-trace"; + }; + }; + + clockgen-a@fd6db000 { + reg = <0xfd6db000 0xb50>; + + clk_m_a1_pll0: clk-m-a1-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll0-phi0", + "clk-m-a1-pll0-phi1", + "clk-m-a1-pll0-phi2", + "clk-m-a1-pll0-phi3"; + }; + + clk_m_a1_pll1: clk-m-a1-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll1-phi0", + "clk-m-a1-pll1-phi1", + "clk-m-a1-pll1-phi2", + "clk-m-a1-pll1-phi3"; + }; + + clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-osc-prediv"; + }; + + clk_m_a1_div0: clk-m-a1-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "", /* Unused */ + "clk-m-fdma-10", + "clk-m-fdma-11", + "clk-m-hva-alt", + "clk-m-proc-sc", + "clk-m-tp", + "clk-m-rx-icn-dmu-0", + "clk-m-rx-icn-dmu-1"; + }; + + clk_m_a1_div1: clk-m-a1-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-rx-icn-ts", + "clk-m-rx-icn-vdp-0", + "", /* Unused */ + "clk-m-prv-t1-bus", + "clk-m-icn-reg-12", + "clk-m-icn-reg-10", + "", /* Unused */ + "clk-m-icn-st231"; + }; + + clk_m_a1_div2: clk-m-a1-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-fvdp-proc-alt", + "clk-m-icn-reg-13", + "clk-m-tx-icn-gpu", + "clk-m-rx-icn-gpu", + "", /* Unused */ + "", /* Unused */ + "", /* clk-m-apb-pm-12 */ + ""; /* Unused */ + }; + + clk_m_a1_div3: clk-m-a1-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* clk-m-gpu-alt */ + }; + }; + + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a0_div1 2>; + clock-div = <2>; + clock-mult = <1>; + }; + + clockgen-a@fd345000 { + reg = <0xfd345000 0xb50>; + + clk_m_a2_pll0: clk-m-a2-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll0-phi0", + "clk-m-a2-pll0-phi1", + "clk-m-a2-pll0-phi2", + "clk-m-a2-pll0-phi3"; + }; + + clk_m_a2_pll1: clk-m-a2-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll1-phi0", + "clk-m-a2-pll1-phi1", + "clk-m-a2-pll1-phi2", + "clk-m-a2-pll1-phi3"; + }; + + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-osc-prediv"; + }; + + clk_m_a2_div0: clk-m-a2-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-vtac-main-phy", + "clk-m-vtac-aux-phy", + "clk-m-stac-phy", + "clk-m-stac-sys", + "", /* clk-m-mpestac-pg */ + "", /* clk-m-mpestac-wc */ + "", /* clk-m-mpevtacaux-pg*/ + ""; /* clk-m-mpevtacmain-pg*/ + }; + + clk_m_a2_div1: clk-m-a2-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* clk-m-mpevtacrx0-wc */ + "", /* clk-m-mpevtacrx1-wc */ + "clk-m-compo-main", + "clk-m-compo-aux", + "clk-m-bdisp-0", + "clk-m-bdisp-1", + "clk-m-icn-bdisp", + "clk-m-icn-compo"; + }; + + clk_m_a2_div2: clk-m-a2-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-icn-vdp-2", + "", /* Unused */ + "clk-m-icn-reg-14", + "clk-m-mdtp", + "clk-m-jpegdec", + "", /* Unused */ + "clk-m-dcephy-impctrl", + ""; /* Unused */ + }; + + clk_m_a2_div3: clk-m-a2-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + ""; /* clk-m-apb-pm-11 */ + /* Remaining outputs unused */ + }; + }; + + /* + * A9 PLL + */ + clockgen-a9@fdde08b0 { + reg = <0xfdde08b0 0x70>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks + */ + clk_m_a9: clk-m-a9@fdde08ac { + #clock-cells = <0>; + compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0xfdde08ac 0x4>; + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_m_a0_div1 2>, + <&clk_m_a9_ext2f_div2>; }; /* * ARM Peripheral clock for timers */ - arm_periph_clk: arm_periph_clk { + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <600000000>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; }; /* - * Bootloader initialized system infrastructure clock for - * serial devices. + * Frequency synthesizers on the SASG2 */ - CLK_S_ICN_REG_0: clockgenA0@4 { + clockgen_b0: clockgen-b0@fee108b4 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfee108b4 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-usb48", + "clk-s-dss", + "clk-s-stfe-frc-2", + "clk-s-thsens-scard"; + }; + + clockgen_b1: clockgen-b1@fe8308c4 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfe8308c4 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-pcm-0", + "clk-s-pcm-1", + "clk-s-pcm-2", + "clk-s-pcm-3"; + }; + + clockgen_c: clockgen-c@fe8307d0 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs432", "st,quadfs"; + reg = <0xfe8307d0 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-c-fs0-ch0", + "clk-s-c-vcc-sd", + "clk-s-c-fs0-ch2"; + }; + + clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - clock-output-names = "CLK_S_ICN_REG_0"; + compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux"; + reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */ + + clocks = <&clk_sysin>, + <&clockgen_c 0>; }; - CLK_S_GMAC0_PHY: clockgenA1@7 { + /* + * Add a dummy clock for the HDMI PHY for the VCC input mux + */ + clk_s_tmds_fromphy: clk-s-tmds-fromphy { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLK_S_GMAC0_PHY"; + clock-frequency = <0>; + }; + + clockgen_c_vcc: clockgen-c-vcc@fe8308ac { + #clock-cells = <1>; + compatible = "st,stih416-clkgenc", "st,clkgen-vcc"; + reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */ + + clocks = <&clk_s_vcc_hd>, + <&clockgen_c 1>, + <&clk_s_tmds_fromphy>, + <&clockgen_c 2>; + + clock-output-names = "clk-s-pix-hdmi", + "clk-s-pix-dvo", + "clk-s-out-dvo", + "clk-s-pix-hd", + "clk-s-hddac", + "clk-s-denc", + "clk-s-sddac", + "clk-s-pix-main", + "clk-s-pix-aux", + "clk-s-stfe-frc-0", + "clk-s-ref-mcru", + "clk-s-slave-mcru", + "clk-s-tmds-hdmi", + "clk-s-hdmi-reject-pll", + "clk-s-thsens"; }; - CLK_S_ETH1_PHY: clockgenA0@7 { + clockgen_d: clockgen-d@fee107e0 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfee107e0 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-ccsc", + "clk-s-stfe-frc-1", + "clk-s-tsout-1", + "clk-s-mchi"; + }; + + /* + * Frequency synthesizers on the MPE42 + */ + clockgen_e: clockgen-e@fd3208bc { + #clock-cells = <1>; + compatible = "st,stih416-quadfs660-E", "st,quadfs"; + reg = <0xfd3208bc 0xb0>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-m-pix-mdtp-0", + "clk-m-pix-mdtp-1", + "clk-m-pix-mdtp-2", + "clk-m-mpelpc"; + }; + + clockgen_f: clockgen-f@fd320878 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs660-F", "st,quadfs"; + reg = <0xfd320878 0xf0>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-m-main-vidfs", + "clk-m-hva-fs", + "clk-m-fvdp-vcpu", + "clk-m-fvdp-proc-fs"; + }; + + clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux"; + reg = <0xfd320910 0x4>; /* SYSCFG8580 */ + + clocks = <&clk_m_a1_div2 0>, + <&clockgen_f 3>; + }; + + clk_m_hva: clk-m-hva@fd690868 { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"; + reg = <0xfd690868 0x4>; /* SYSCFG9538 */ + + clocks = <&clockgen_f 1>, + <&clk_m_a1_div0 3>; + }; + + clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux"; + reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ + + clocks = <&clockgen_c_vcc 7>, + <&clockgen_f 0>; + }; + + clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"; + reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ + + clocks = <&clockgen_c_vcc 8>, + <&clockgen_f 1>; + }; + + /* + * Add a dummy clock for the HDMIRx external signal clock + */ + clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLK_S_ETH1_PHY"; + clock-frequency = <0>; + }; + + clockgen_f_vcc: clockgen-f-vcc@fd32086c { + #clock-cells = <1>; + compatible = "st,stih416-clkgenf", "st,clkgen-vcc"; + reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */ + + clocks = <&clk_m_f_vcc_hd>, + <&clk_m_f_vcc_sd>, + <&clockgen_f 0>, + <&clk_m_pix_hdmirx_sas>; + + clock-output-names = "clk-m-pix-main-pipe", + "clk-m-pix-aux-pipe", + "clk-m-pix-main-cru", + "clk-m-pix-aux-cru", + "clk-m-xfer-be-compo", + "clk-m-xfer-pip-compo", + "clk-m-xfer-aux-compo", + "clk-m-vsens", + "clk-m-pix-hdmirx-0", + "clk-m-pix-hdmirx-1"; + }; + + /* + * DDR PLL + */ + clockgen-ddr@0xfdde07d8 { + reg = <0xfdde07d8 0x110>; + + clockgen_ddr_pll: clockgen-ddr-pll { + #clock-cells = <1>; + compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-ddr0", + "clockgen-ddr1"; + }; + }; + + /* + * GPU PLL + */ + clockgen-gpu@fd68ff00 { + reg = <0xfd68ff00 0x910>; + + clockgen_gpu_pll: clockgen-gpu-pll { + #clock-cells = <1>; + compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-gpu-pll"; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 250d5ecc951e..ee6c119e261e 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -122,6 +122,22 @@ }; }; + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&PIO0 2 ALT2 IN>; + keyin1 = <&PIO0 3 ALT2 IN>; + keyin2 = <&PIO0 4 ALT2 IN>; + keyin3 = <&PIO2 6 ALT2 IN>; + + keyout0 = <&PIO1 6 ALT2 OUT>; + keyout1 = <&PIO1 7 ALT2 OUT>; + keyout2 = <&PIO0 6 ALT2 OUT>; + keyout3 = <&PIO2 7 ALT2 OUT>; + }; + }; + }; + sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 78746d20382e..06473c5d9ea9 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -89,7 +89,7 @@ status = "disabled"; reg = <0xfed32000 0x2c>; interrupts = <0 197 0>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; }; @@ -102,14 +102,14 @@ interrupts = <0 210 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; }; i2c@fed40000 { compatible = "st,comms-ssc4-i2c"; reg = <0xfed40000 0x110>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -122,7 +122,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed41000 0x110>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -135,7 +135,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe540000 0x110>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -148,7 +148,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe541000 0x110>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -176,7 +176,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; clock-names = "stmmaceth"; - clocks = <&CLK_S_GMAC0_PHY>; + clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -198,7 +198,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; clock-names = "stmmaceth"; - clocks = <&CLK_S_ETH1_PHY>; + clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { @@ -206,7 +206,7 @@ reg = <0xfe518000 0x234>; interrupts = <0 203 0>; rx-mode = "infrared"; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; resets = <&softreset STIH416_IRB_SOFTRESET>; @@ -224,5 +224,17 @@ status = "disabled"; }; + + keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + status = "disabled"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&clk_sysin>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, + <&softreset STIH416_KEYSCAN_SOFTRESET>; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index bf65c49095af..b3dd6ca5c2ae 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -6,6 +6,7 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ +#include <dt-bindings/input/input.h> / { memory{ @@ -14,7 +15,7 @@ }; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &serial2; }; @@ -68,5 +69,27 @@ snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; + + keyscan: keyscan@fe4b0000 { + keypad,num-rows = <4>; + keypad,num-columns = <4>; + st,debounce-us = <5000>; + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) + MATRIX_KEY(0x00, 0x01, KEY_F9) + MATRIX_KEY(0x00, 0x02, KEY_F5) + MATRIX_KEY(0x00, 0x03, KEY_F1) + MATRIX_KEY(0x01, 0x00, KEY_F14) + MATRIX_KEY(0x01, 0x01, KEY_F10) + MATRIX_KEY(0x01, 0x02, KEY_F6) + MATRIX_KEY(0x01, 0x03, KEY_F2) + MATRIX_KEY(0x02, 0x00, KEY_F15) + MATRIX_KEY(0x02, 0x01, KEY_F11) + MATRIX_KEY(0x02, 0x02, KEY_F7) + MATRIX_KEY(0x02, 0x03, KEY_F3) + MATRIX_KEY(0x03, 0x00, KEY_F16) + MATRIX_KEY(0x03, 0x01, KEY_F12) + MATRIX_KEY(0x03, 0x02, KEY_F8) + MATRIX_KEY(0x03, 0x03, KEY_F4) >; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 838513f9ddc0..d8a84295c328 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -14,7 +14,7 @@ }; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &sbc_serial1; }; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index f5b9898d9c6e..5cb0e63376b5 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -1,3 +1,10 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ / { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index fa746aea5e66..0b97c071dd56 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -36,6 +36,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 4684cbe6843b..c200eacc66e8 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -34,6 +34,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index d7c17e46ce23..547fadcb984b 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -36,6 +36,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index fe9272ee55c3..f13723e18b86 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -24,6 +24,16 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index dd84a9e313b3..c01cea50cf0c 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -20,6 +20,16 @@ compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 66cf0c7cf5b7..d46a7dbecef5 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -33,6 +33,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 255b47e7019c..fb03bccb78d2 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -34,6 +34,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 9174724571e2..d96e179490ce 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -377,6 +377,42 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <33>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + interrupts = <35>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; @@ -477,6 +513,20 @@ #size-cells = <0>; #gpio-cells = <3>; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; @@ -529,6 +579,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; }; timer@01c20c00 { @@ -549,6 +613,14 @@ interrupts = <24>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun4i-a10-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -641,30 +713,36 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 23611b71d3aa..ea9519da5764 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -35,6 +35,26 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-inverted; + status = "okay"; + }; + + mmc1: mmc@01c10000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 13 0>; /* PG13 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -49,6 +69,20 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PE3"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts new file mode 100644 index 000000000000..43a93762d4f2 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -0,0 +1,100 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i-a10s.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "R7 A10s hdmi tv-stick"; + compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-inverted; + status = "okay"; + }; + + mmc1: mmc@01c10000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_r7: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + led_pins_r7: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_r7: usb1_vbus_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_r7>; + + green { + label = "r7-tv-dongle:green:usr"; + gpios = <&pio 1 2 0>; + default-state = "on"; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_r7>; + gpio = <&pio 6 13 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 79989ed5658d..b64f705d9008 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -338,6 +338,33 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <33>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; @@ -451,6 +478,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; + allwinner,function = "mmc1"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -519,7 +560,7 @@ i2c0: i2c@01c2ac00 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; @@ -530,7 +571,7 @@ i2c1: i2c@01c2b000 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; @@ -541,7 +582,7 @@ i2c2: i2c@01c2b400 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 11169d5b5b86..fa44b026483b 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -21,6 +21,16 @@ compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -35,6 +45,13 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxinom: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 7a9187bbeb28..429994e1943e 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -20,6 +20,16 @@ compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -34,6 +44,13 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f01c315bdc4b..3b2a94c40f6e 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -320,6 +320,24 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; @@ -415,6 +433,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -461,30 +486,36 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; timer@01c60000 { diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts new file mode 100644 index 000000000000..2bbf8867362b --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2014 Boris Brezillon + * + * Boris Brezillon <boris.brezillon@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Allwinner A31 APP4 EVB1 Evaluation Board"; + compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + pio: pinctrl@01c20800 { + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH27"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + usbphy: phy@01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c1a000 { + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 27 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 3898a7bce831..546cf6eff5c7 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "WITS A31 Colombus Evaluation Board"; @@ -23,6 +24,45 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c19400 { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci1: usb@01c1b000 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + mmc0_pins_a: mmc0@0 { + allwinner,pull = <1>; + }; + + mmc0_cd_pin_colombus: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + usb2_vbus_pin_colombus: usb2_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -47,4 +87,11 @@ status = "okay"; }; }; + + reg_usb2_vbus: usb2-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_colombus>; + gpio = <&pio 7 24 0>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts new file mode 100644 index 000000000000..bc6115da5ae1 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Mele M9 / A1000G Quad top set box"; + compatible = "mele,m9", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 0>; /* PH22 */ + cd-inverted; + status = "okay"; + }; + + pio: pinctrl@01c20800 { + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index d45efa74827c..a9dfa12eb735 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -27,6 +27,7 @@ cpus { + enable-method = "allwinner,sun6i-a31"; #address-cells = <1>; #size-cells = <0>; @@ -59,6 +60,14 @@ reg = <0x40000000 0x80000000>; }; + pmu { + compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + interrupts = <0 120 4>, + <0 121 4>, + <0 122 4>, + <0 123 4>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -198,6 +207,38 @@ "apb2_uart4", "apb2_uart5"; }; + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc3"; + }; + spi0_clk: clk@01c200a0 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -229,6 +270,17 @@ clocks = <&osc24M>, <&pll6>; clock-output-names = "spi3"; }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", + "usb_ohci0", "usb_ohci1", + "usb_ohci2"; + }; }; soc@01c00000 { @@ -237,12 +289,134 @@ #size-cells = <1>; ranges; - nmi_intc: interrupt-controller@01f00c0c { - compatible = "allwinner,sun6i-a31-sc-nmi"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x01f00c0c 0x38>; - interrupts = <0 32 4>; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <0 60 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <0 61 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <0 62 4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb1_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 11>; + reset-names = "ahb"; + interrupts = <0 63 4>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun6i-a31-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&usb_clk 8>, + <&usb_clk 9>, + <&usb_clk 10>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&usb_clk 0>, + <&usb_clk 1>, + <&usb_clk 2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@01c1a000 { + compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <0 72 4>; + clocks = <&ahb1_gates 26>; + resets = <&ahb1_rst 26>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <0 73 4>; + clocks = <&ahb1_gates 29>, <&usb_clk 16>; + resets = <&ahb1_rst 29>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <0 74 4>; + clocks = <&ahb1_gates 27>; + resets = <&ahb1_rst 27>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = <0 75 4>; + clocks = <&ahb1_gates 30>, <&usb_clk 17>; + resets = <&ahb1_rst 30>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@01c1c400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <0 77 4>; + clocks = <&ahb1_gates 31>, <&usb_clk 18>; + resets = <&ahb1_rst 31>; + status = "disabled"; }; pio: pinctrl@01c20800 { @@ -286,6 +460,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; ahb1_rst: reset@01c202c0 { @@ -330,6 +511,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 16>; resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -341,6 +524,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 17>; resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -352,6 +537,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 18>; resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -363,6 +550,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 19>; resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -374,6 +563,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 20>; resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -385,6 +576,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 21>; resets = <&apb2_rst 21>; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -428,12 +621,25 @@ status = "disabled"; }; + timer@01c60000 { + compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 4>, + <0 52 4>, + <0 53 4>, + <0 54 4>; + clocks = <&ahb1_gates 19>; + resets = <&ahb1_rst 19>; + }; + spi0: spi@01c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; interrupts = <0 65 4>; clocks = <&ahb1_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 20>; status = "disabled"; }; @@ -444,6 +650,8 @@ interrupts = <0 66 4>; clocks = <&ahb1_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 21>; status = "disabled"; }; @@ -454,6 +662,8 @@ interrupts = <0 67 4>; clocks = <&ahb1_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 22>; status = "disabled"; }; @@ -464,6 +674,8 @@ interrupts = <0 68 4>; clocks = <&ahb1_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 26>, <&dma 26>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 23>; status = "disabled"; }; @@ -479,14 +691,74 @@ interrupts = <1 9 0xf04>; }; + nmi_intc: interrupt-controller@01f00c0c { + compatible = "allwinner,sun6i-a31-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c0c 0x38>; + interrupts = <0 32 4>; + }; + + prcm@01f01400 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "allwinner,sun6i-a31-ar100-clk"; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun6i-a31-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun6i-a31-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_ir", + "apb0_timer", "apb0_p2wi", + "apb0_uart", "apb0_1wire", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + cpucfg@01f01c00 { compatible = "allwinner,sun6i-a31-cpuconfig"; reg = <0x01f01c00 0x300>; }; - prcm@01f01c00 { - compatible = "allwinner,sun6i-a31-prcm"; - reg = <0x01f01400 0x200>; + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun6i-a31-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <0 45 4>, + <0 46 4>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; }; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 68de89ffbdfa..a5ad945197e8 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -20,6 +20,16 @@ compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index cb25d3c8da58..b87fea901489 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -20,6 +20,25 @@ compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -48,6 +67,18 @@ }; pinctrl@01c20800 { + mmc3_pins_a: mmc3@0 { + /* AP6210 requires pull-up */ + allwinner,pull = <1>; + }; + + vmmc3_pin_cubietruck: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; @@ -63,6 +94,12 @@ }; }; + pwm: pwm@01c20e00 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -139,4 +176,15 @@ reg_usb2_vbus: usb2-vbus { status = "okay"; }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_cubietruck>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 9 0>; + }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts new file mode 100644 index 000000000000..b77308e90199 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -0,0 +1,176 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "I12 / Q5 / QT840A A20 tvbox"; + compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc3_pins_a: mmc3@0 { + /* AP6210 / AP6330 requires pull-up */ + allwinner,pull = <1>; + }; + + vmmc3_pin_i12_tvbox: vmmc3_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_power_pin_i12_tvbox: gmac_power_pin@0 { + allwinner,pins = "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_i12_tvbox: led_pins@0 { + allwinner,pins = "PH9", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_i12_tvbox>; + + red { + label = "i12_tvbox:red:usr"; + gpios = <&pio 7 9 1>; + }; + + blue { + label = "i12_tvbox:blue:usr"; + gpios = <&pio 7 20 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_i12_tvbox>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 2 0>; + }; + + reg_vmmc3_io: vmmc3-io { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>; + regulator-name = "vmmc3-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* This controls VCC-PI, must be always on! */ + regulator-always-on; + enable-active-high; + gpio = <&pio 7 12 0>; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_i12_tvbox>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&pio 7 21 0>; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index eeadf76362fa..b759630bc9a9 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -31,6 +31,26 @@ status = "okay"; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 0>; /* PH11 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -65,6 +85,13 @@ }; pinctrl@01c20800 { + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index aba1c8a3f388..01e94664232a 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -57,6 +57,12 @@ <1 10 0xf08>; }; + pmu { + compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + interrupts = <0 120 4>, + <0 121 4>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -455,6 +461,42 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 32 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 33 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 34 4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 35 4>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; @@ -548,6 +590,20 @@ #size-cells = <0>; #gpio-cells = <3>; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; @@ -661,6 +717,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -686,6 +763,14 @@ interrupts = <0 24 4>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; @@ -778,48 +863,58 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <0 7 4>; clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <0 8 4>; clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <0 9 4>; clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = <0 88 4>; clocks = <&apb1_gates 3>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c4: i2c@01c2c000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c50000 { diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 18eeac0670b9..3d021efd1a38 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -72,4 +72,18 @@ gpio = <&pio 7 3 0>; status = "disabled"; }; + + reg_vcc3v0: vcc3v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index a288a12823ed..5c21d216515a 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -25,6 +25,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&vdd_hdmi_reg>; pll-supply = <&palmas_smps3_reg>; @@ -36,6 +37,8 @@ dsi@54300000 { status = "okay"; + avdd-dsi-csi-supply = <&avdd_1v2_reg>; + panel@0 { compatible = "panasonic,vvx10f004b00", "simple-panel"; @@ -982,12 +985,10 @@ regulator-max-microvolt = <2800000>; }; - ldo3 { + avdd_1v2_reg: ldo3 { regulator-name = "avdd-dsi-csi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; }; ldo4 { @@ -1105,6 +1106,7 @@ sdhci@78000400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "okay"; }; @@ -1231,8 +1233,6 @@ regulator-name = "vdd_hdmi_5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&tps65090_dcdc1_reg>; }; @@ -1245,6 +1245,17 @@ enable-active-high; gpio = <&palmas_gpio 6 0>; }; + + vdd_5v0_hdmi: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&tps65090_dcdc1_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts new file mode 100644 index 000000000000..0b0e8e07d965 --- /dev/null +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -0,0 +1,1113 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra114.dtsi" + +/ { + model = "NVIDIA SHIELD"; + compatible = "nvidia,roth", "nvidia,tegra114"; + + chosen { + /* SHIELD's bootloader's arguments need to be overridden */ + bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1"; + /* SHIELD's bootloader will place initrd at this address */ + linux,initrd-start = <0x82000000>; + linux,initrd-end = <0x82800000>; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + memory { + /* memory >= 0x79600000 is reserved for firmware usage */ + reg = <0x80000000 0x79600000>; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1", + "ulpi_nxt_py2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0", + "pbb0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a18_pb1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5", + "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6", + "gmi_ad7_pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs6_n_pi13 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs1_n_pj2 { + nvidia,pins = "gmi_cs1_n_pj2", + "gmi_oe_n_pi1"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_rst_n_pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_iordy_pi5 { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_cd_n_pv2", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_cs0_n_pj0 { + nvidia,pins = "gmi_cs0_n_pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4", + "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb5", + "pbb6", + "pbb7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1", + "pcc2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad12_ph4", + "gmi_ad15_ph7", + "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad11_ph3 { + nvidia,pins = "gmi_ad11_ph3", + "gmi_ad13_ph5", + "gmi_ad8_ph0", + "gmi_clk_pk1", + "gmi_cs2_n_pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad14_ph6 { + nvidia,pins = "gmi_ad14_ph6", + "gmi_cs0_n_pj0", + "gmi_cs4_n_pk2", + "gmi_cs7_n_pi6", + "gmi_dqs_p_pj3", + "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3", + "kb_row4_pr4", + "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + }; + }; + + /* Usable on reworked devices only */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + regulator@43 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1520000>; + regulator-always-on; + regulator-boot-on; + }; + + palmas: pmic@58 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + + regulators { + smps12 { + regulator-name = "vdd-ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: smps3 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps457 { + regulator-name = "vdd-soc"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8 { + regulator-name = "avdd-pll-1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9 { + regulator-name = "vdd-2v85-emmc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + smps10_out1 { + regulator-name = "vdd-fan"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out2 { + regulator-name = "vdd-5v0-sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd-2v8-display"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "avdd-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vpp-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5 { + regulator-name = "avdd-hdmi-pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "vdd-sensor-2v8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo8 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + ti,enable-ldo8-tracking; + }; + + vddio_sdmmc3: ldo9 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb { + regulator-name = "avdd-usb-hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regen1 { + regulator-name = "rail-3v3"; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + regen2 { + regulator-name = "rail-5v0"; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + /* SD card */ + sdhci@78000400 { + status = "okay"; + bus-width = <4>; + vmmc-supply = <&vddio_sdmmc3>; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vdd_1v8>; + non-removable; + }; + + /* External USB port (must be powered) */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + /* Should be changed to "otg" once we have vbus_supply */ + /* As of now, USB devices need to be powered externally */ + dr_mode = "host"; + }; + + /* SHIELD controller */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&lcd_bl_en>; + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + back { + label = "Back"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + home { + label = "Home"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + lcd_bl_en: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "lcd_bl_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_lcd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_1v8>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v8_ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_3v3_ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_1v8_com"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_1v8>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_sys>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts new file mode 100644 index 000000000000..963662145635 --- /dev/null +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -0,0 +1,348 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra114.dtsi" + +/ { + model = "Tegra Note 7"; + compatible = "nvidia,tn7", "nvidia,tegra114"; + + chosen { + /* TN7's bootloader's arguments need to be overridden */ + bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2"; + /* TN7's bootloader will place initrd at this address */ + linux,initrd-start = <0x82000000>; + linux,initrd-end = <0x82800000>; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + memory { + /* memory >= 0x37e00000 is reserved for firmware usage */ + reg = <0x80000000 0x37e00000>; + }; + + host1x@50000000 { + dsi@54300000 { + status = "okay"; + + vdd-supply = <&vdd_1v2_ap>; + + panel@0 { + compatible = "lg,ld070wx3-sl01"; + reg = <0>; + + power-supply = <&vdd_lcd>; + backlight = <&backlight>; + }; + }; + }; + + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + palmas: pmic@58 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + + ldoln-in-supply = <&vdd_smps10_out2>; + + regulators { + smps123 { + regulator-name = "vd-cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45 { + regulator-name = "vd-soc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6 { + regulator-name = "va-lcd-hv"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7 { + regulator-name = "vd-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: smps8 { + regulator-name = "vs-pmu-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_2v9_sys: smps9 { + regulator-name = "vs-sys-2v9"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out1: smps10_out1 { + regulator-name = "vd-smps10-out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out2: smps10_out2 { + regulator-name = "vd-smps10-out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "va-pllx"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v2_ap: ldo2 { + regulator-name = "va-ap-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "vd-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vd-ts-hv"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-name = "va-cam2-hv"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo6 { + regulator-name = "va-sns-hv"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo7 { + regulator-name = "va-cam1-hv"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo8 { + regulator-name = "va-ap-rtc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + ti,enable-ldo8-tracking; + regulator-always-on; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "vi-sdcard"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + ldousb { + regulator-name = "avdd-usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln { + regulator-name = "va-hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vdd_1v8>; + non-removable; + }; + + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + /* Should be changed to "otg" once we have vbus_supply */ + /* As of now, USB devices need to be powered externally */ + dr_mode = "host"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&lcd_bl_en>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* FIXME: output of BQ24192 */ + vs_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VS_SYS"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + + lcd_bl_en: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_LCD_BL"; + regulator-min-microvolt = <16500000>; + regulator-max-microvolt = <16500000>; + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vs_sys>; + regulator-boot-on; + }; + + vdd_lcd: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "VD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8>; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts new file mode 100644 index 000000000000..e31fb61a81d3 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -0,0 +1,1827 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124.dtsi" + +/ { + model = "NVIDIA Tegra124 Jetson TK1"; + compatible = "nvidia,jetson-tk1", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + hdmi-supply = <&vdd_5v0_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + vdd-supply = <&vdd_3v3_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + pinmux: pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pb0 { + nvidia,pins = "pb0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pb1 { + nvidia,pins = "pb1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pc7 { + nvidia,pins = "pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg0 { + nvidia,pins = "pg0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg1 { + nvidia,pins = "pg1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg2 { + nvidia,pins = "pg2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg3 { + nvidia,pins = "pg3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph2 { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph4 { + nvidia,pins = "ph4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph5 { + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi0 { + nvidia,pins = "pi0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi1 { + nvidia,pins = "pi1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi2 { + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi4 { + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi5 { + nvidia,pins = "pi5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi6 { + nvidia,pins = "pi6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi7 { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pj0 { + nvidia,pins = "pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pj7 { + nvidia,pins = "pj7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "sys"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "displaya_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row16_pt0 { + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row17_pt1 { + nvidia,pins = "kb_row17_pt1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cd_n_pv2 { + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vimclk2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_req_pee2 { + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_out_pee4 { + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_in_pee5 { + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "dp"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en2_pff1 { + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + /* DB9 serial port */ + serial@0,70006300 { + status = "okay"; + }; + + /* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */ + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + rt5639: audio-codec@1c { + compatible = "realtek,rt5639"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + }; + + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + pagesize = <8>; + }; + }; + + /* Expansion GEN2_I2C_* */ + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* Expansion CAM_I2C_* */ + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* HDMI DDC */ + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* Expansion PWR_I2C_*, on-board components */ + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1_2_4_7 { + pins = "gpio1", "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_5_6 { + pins = "gpio3", "gpio5", "gpio6"; + bias-high-impedance; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <2500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,external-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.05V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + ldo4 { + regulator-name = "+2.8V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+3.3V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + /* Expansion TS_SPI_* */ + spi@0,7000d400 { + status = "okay"; + }; + + /* Internal SPI */ + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + /* SD card */ + sdhci@0,700b0400 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + /* eMMC */ + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + /* mini-PCIe USB */ + usb@0,7d004000 { + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + }; + + /* USB A connector */ + usb@0,7d008000 { + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+USB0_VBUS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-rt5640-jetson-tk1", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "NVIDIA Tegra Jetson TK1"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL", + "Mic Jack", "MICBIAS1", + "IN2P", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5639>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index c17283c04598..f0bb84244025 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -17,6 +17,18 @@ }; host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + sor@0,54540000 { status = "okay"; @@ -601,7 +613,7 @@ clock-frequency = <100000>; }; - i2c@0,7000c700 { + hdmi_ddc: i2c@0,7000c700 { status = "okay"; clock-frequency = <100000>; }; @@ -700,7 +712,7 @@ regulator-boot-on; }; - sd4 { + vdd_1v05_run: sd4 { regulator-name = "+1.05V_RUN"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -931,9 +943,10 @@ sdhci@0,700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; status = "okay"; bus-width = <4>; - vmmc-supply = <&vddio_sdmmc3>; + vqmmc-supply = <&vddio_sdmmc3>; }; sdhci@0,700b0600 { @@ -1060,6 +1073,8 @@ regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_3v3_sys>; @@ -1145,6 +1160,27 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 6d540a025148..6e6bc4e8185c 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -51,6 +51,18 @@ nvidia,head = <1>; }; + hdmi@0,54280000 { + compatible = "nvidia,tegra124-hdmi"; + reg = <0x0 0x54280000 0x0 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDMI>, + <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + sor@0,54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 3fb1f50f6d46..f45aad688d9b 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -28,6 +28,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; @@ -724,6 +725,17 @@ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_5v0_hdmi: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index e93fe45b7803..3189791a9289 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -40,6 +40,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&sys_3v3_reg>; pll-supply = <&vio_reg>; @@ -478,6 +479,17 @@ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; + + vdd_5v0_hdmi: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+VDD_5V_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&sys_3v3_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts new file mode 100644 index 000000000000..7793abd5bef1 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -0,0 +1,205 @@ +/dts-v1/; + +#include "tegra30-colibri.dtsi" + +/ { + model = "Toradex Colibri T30 on Colibri Evaluation Board"; + compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc2 = "/rtc@7000e000"; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + hdmi@54280000 { + status = "okay"; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ + hdmiddc: i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Colibri SSP */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + }; + spidev0: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + }; + + sdhci@78000200 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "otg"; + vbus-supply = <&usbc_vbus_reg>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + /* PWM<A> */ + pwms = <&pwm 0 5000000>; + brightness-levels = <255 128 64 32 16 8 4 0>; + default-brightness-level = <6>; + /* BL_ON */ + enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + }; + + clocks { + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + + backlight = <&backlight>; + }; + + pwmleds { + compatible = "pwm-leds"; + + pwmb { + label = "PWM<B>"; + pwms = <&pwm 1 19600>; + max-brightness = <255>; + }; + pwmc { + label = "PWM<C>"; + pwms = <&pwm 2 19600>; + max-brightness = <255>; + }; + pwmd { + label = "PWM<D>"; + pwms = <&pwm 3 19600>; + max-brightness = <255>; + }; + }; + + regulators { + sys_5v0_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + usbc_vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usbc_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&sys_5v0_reg>; + }; + + /* USBH_PEN */ + usbh_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <&sys_5v0_reg>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi new file mode 100644 index 000000000000..bf16f8e65627 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -0,0 +1,377 @@ +#include <dt-bindings/input/input.h> +#include "tegra30.dtsi" + +/* + * Toradex Colibri T30 Device Tree + * Compatible for Revisions 1.1B/1.1C/1.1D + */ +/ { + model = "Toradex Colibri T30"; + compatible = "toradex,colibri_t30", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + host1x@50000000 { + hdmi@54280000 { + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Colibri BL_ON */ + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri Backlight PWM<A> */ + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri CAN_INT */ + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE + * todays display need DE, disable LCD_M1 + */ + lcd_m1_pw1 { + nvidia,pins = "lcd_m1_pw1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Thermal alert, need to be disabled */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri MMC */ + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri SSP */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat6_pd3 { + nvidia,pins = "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri UART_A */ + ulpi_data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri UART_B */ + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri UART_C */ + uart2_rxd { + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* eMMC */ + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + hdmiddc: i2c@7000c700 { + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&sys_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: unused */ + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* LDO3: unused */ + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + /* + * LM95245 temperature sensor + * Note: OVERT_N directly connected to PMIC PWRDN + */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + + /* SW: +V1.2_VDD_CORE */ + tps62362@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + + regulator-name = "tps62362-vout"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-low; + /* VSEL1: EN_CORE_DVFS_N low for DVFS */ + ti,vsel1-state-low; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + emmc: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* EHCI instance 1: USB2_DP/N -> AX88772B */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + nvidia,is-wired = <1>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 86cfc7d15ca7..36ae9160b558 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -152,4 +152,10 @@ keypad,num-rows = <8>; keypad,num-columns = <8>; }; + + twl_madc: madc { + compatible = "ti,twl4030-madc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; }; diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi index c353ef0a6ac7..3537ae5b2146 100644 --- a/arch/arm/boot/dts/twl4030_omap3.dtsi +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -8,7 +8,7 @@ &twl { pinctrl-names = "default"; - pinctrl-0 = <&twl4030_pins>; + pinctrl-0 = <&twl4030_pins &twl4030_vpins>; }; &omap3_pmx_core { @@ -23,3 +23,20 @@ >; }; }; + +/* + * If your board is not using the I2C4 pins with twl4030, then don't include + * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode + * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and + * sys_nvmode2 signaling. + */ +&omap3_pmx_wkup { + twl4030_vpins: pinmux_twl4030_vpins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */ + OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */ + OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */ + OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */ + >; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index ac870fb3fa0d..756c986995a3 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -74,8 +74,24 @@ v2m_sysreg: sysreg@010000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@020000 { @@ -113,8 +129,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -265,6 +281,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f1420368355b..ba856d604fb7 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -73,8 +73,24 @@ v2m_sysreg: sysreg@00000 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@01000 { @@ -112,8 +128,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -264,6 +280,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 15f98cbcb75a..a25c262326dc 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -312,6 +312,7 @@ arm,vexpress-sysreg,func = <12 0>; label = "A15 Pcore"; }; + power@1 { /* Total power for the three A7 cores */ compatible = "arm,vexpress-power"; @@ -322,14 +323,14 @@ energy@0 { /* Total energy for the two A15 cores */ compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 0>; + arm,vexpress-sysreg,func = <13 0>, <13 1>; label = "A15 Jcore"; }; energy@2 { /* Total energy for the three A7 cores */ compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 2>; + arm,vexpress-sysreg,func = <13 2>, <13 3>; label = "A7 Jcore"; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index c544a5504591..d2709b73316b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -88,6 +88,14 @@ interrupts = <1 13 0x304>; }; + timer@2c000200 { + compatible = "arm,cortex-a5-global-timer", + "arm,cortex-a9-global-timer"; + reg = <0x2c000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&oscclk0>; + }; + watchdog@2c000620 { compatible = "arm,cortex-a5-twd-wdt"; reg = <0x2c000620 0x20>; @@ -120,7 +128,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0: osc@0 { /* CPU and internal AXI reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts new file mode 100644 index 000000000000..aecc7dbc65e8 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri.dts @@ -0,0 +1,123 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "Toradex Colibri VF61 COM"; + compatible = "toradex,vf610-colibri", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; + + memory { + reg = <0x80000000 0x10000000>; + }; + + clocks { + enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&L2 { + arm,data-latency = <2 1 2>; + arm,tag-latency = <3 2 3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index ded361075aab..11d733406c7e 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -113,6 +113,13 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + &fec0 { phy-mode = "rmii"; pinctrl-names = "default"; @@ -160,6 +167,18 @@ >; }; + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + pinctrl_fec0: fec0grp { fsl,pins = < VF610_PAD_PTA6__RMII_CLKIN 0x30d1 @@ -196,6 +215,17 @@ >; }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + VF610_PAD_PTB6__FTM0_CH6 0x1582 + VF610_PAD_PTB7__FTM0_CH7 0x1582 + >; + }; + pinctrl_sai2: sai2grp { fsl,pins = < VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed @@ -217,6 +247,12 @@ }; }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + status = "okay"; +}; + &sai2 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index b8ce0aa7b157..6cc314e7b8fb 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -183,6 +183,19 @@ clock-names = "pit"; }; + pwm0: pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40038000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + status = "disabled"; + }; + adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; @@ -347,6 +360,30 @@ status = "disabled"; }; + esdhc1: esdhc@400b2000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x400b2000 0x4000>; + interrupts = <0 28 0x04>; + clocks = <&clks VF610_CLK_IPG_BUS>, + <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_ESDHC1>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + ftm: ftm@400b8000 { + compatible = "fsl,ftm-timer"; + reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ftm-evt", "ftm-src", + "ftm-evt-counter-en", "ftm-src-counter-en"; + clocks = <&clks VF610_CLK_FTM2>, + <&clks VF610_CLK_FTM3>, + <&clks VF610_CLK_FTM2_EXT_FIX_EN>, + <&clks VF610_CLK_FTM3_EXT_FIX_EN>; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index 51d0e912c8f5..1929ad390d88 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -165,5 +165,11 @@ reg = <0xd8100000 0x10000>; interrupts = <48>; }; + + ethernet@d8004000 { + compatible = "via,vt8500-rhine"; + reg = <0xd8004000 0x100>; + interrupts = <10>; + }; }; }; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index 7525982262ac..b1c59a766a13 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -218,5 +218,11 @@ reg = <0xd8100000 0x10000>; interrupts = <48>; }; + + ethernet@d8004000 { + compatible = "via,vt8500-rhine"; + reg = <0xd8004000 0x100>; + interrupts = <10>; + }; }; }; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index d98386dd2882..8fbccfbe75f3 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -298,5 +298,11 @@ bus-width = <4>; sdon-inverted; }; + + ethernet@d8004000 { + compatible = "via,vt8500-rhine"; + reg = <0xd8004000 0x100>; + interrupts = <10>; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index c1176abc34d9..760bbc463c5b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -25,6 +25,7 @@ reg = <0>; clocks = <&clkc 3>; clock-latency = <1000>; + cpu0-supply = <®ulator_vccpint>; operating-points = < /* kHz uV */ 666667 1000000 @@ -48,6 +49,15 @@ reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; }; + regulator_vccpint: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCCPINT"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + amba { compatible = "simple-bus"; #address-cells = <1>; @@ -55,7 +65,7 @@ interrupt-parent = <&intc>; ranges; - i2c0: zynq-i2c@e0004000 { + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 38>; @@ -66,7 +76,7 @@ #size-cells = <0>; }; - i2c1: zynq-i2c@e0005000 { + i2c1: i2c@e0005000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 39>; @@ -80,7 +90,6 @@ intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xF8F01000 0x1000>, <0xF8F00100 0x100>; @@ -95,7 +104,7 @@ cache-level = <2>; }; - uart0: uart@e0000000 { + uart0: serial@e0000000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; @@ -104,7 +113,7 @@ interrupts = <0 27 4>; }; - uart1: uart@e0001000 { + uart1: serial@e0001000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; @@ -131,7 +140,7 @@ clock-names = "pclk", "hclk", "tx_clk"; }; - sdhci0: ps7-sdhci@e0100000 { + sdhci0: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -141,7 +150,7 @@ reg = <0xe0100000 0x1000>; } ; - sdhci1: ps7-sdhci@e0101000 { + sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -177,6 +186,11 @@ }; }; + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + } ; + global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xf8f00200 0x20>; @@ -185,26 +199,27 @@ clocks = <&clkc 4>; }; - ttc0: ttc0@f8001000 { + ttc0: timer@f8001000 { interrupt-parent = <&intc>; - interrupts = < 0 10 4 0 11 4 0 12 4 >; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; }; - ttc1: ttc1@f8002000 { + ttc1: timer@f8002000 { interrupt-parent = <&intc>; - interrupts = < 0 37 4 0 38 4 0 39 4 >; + interrupts = <0 37 4>, <0 38 4>, <0 39 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; }; - scutimer: scutimer@f8f00600 { + + scutimer: timer@f8f00600 { interrupt-parent = <&intc>; - interrupts = < 1 13 0x301 >; + interrupts = <1 13 0x301>; compatible = "arm,cortex-a9-twd-timer"; - reg = < 0xf8f00600 0x20 >; + reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; } ; }; diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index f01c0ee0c87e..490f3dced749 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -433,8 +433,12 @@ static void bL_switcher_restore_cpus(void) { int i; - for_each_cpu(i, &bL_switcher_removed_logical_cpus) - cpu_up(i); + for_each_cpu(i, &bL_switcher_removed_logical_cpus) { + struct device *cpu_dev = get_cpu_device(i); + int ret = device_online(cpu_dev); + if (ret) + dev_err(cpu_dev, "switcher: unable to restore CPU\n"); + } } static int bL_switcher_halve_cpus(void) @@ -521,7 +525,7 @@ static int bL_switcher_halve_cpus(void) continue; } - ret = cpu_down(i); + ret = device_offline(get_cpu_device(i)); if (ret) { bL_switcher_restore_cpus(); return ret; diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 5339009b3c0c..485be42519b9 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -102,7 +102,13 @@ #define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) #define EDMA_DCHMAP 0x0100 /* 64 registers */ -#define CHMAP_EXIST BIT(24) + +/* CCCFG register */ +#define GET_NUM_DMACH(x) (x & 0x7) /* bits 0-2 */ +#define GET_NUM_PAENTRY(x) ((x & 0x7000) >> 12) /* bits 12-14 */ +#define GET_NUM_EVQUE(x) ((x & 0x70000) >> 16) /* bits 16-18 */ +#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */ +#define CHMAP_EXIST BIT(24) #define EDMA_MAX_DMACH 64 #define EDMA_MAX_PARAMENTRY 512 @@ -233,7 +239,6 @@ struct edma { unsigned num_region; unsigned num_slots; unsigned num_tc; - unsigned num_cc; enum dma_event_q default_queue; /* list of channels with no even trigger; terminated by "-1" */ @@ -290,12 +295,6 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no, ~(0x7 << bit), queue_no << bit); } -static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no) -{ - int bit = queue_no * 4; - edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); -} - static void __init assign_priority_to_queue(unsigned ctlr, int queue_no, int priority) { @@ -994,29 +993,23 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port, EXPORT_SYMBOL(edma_set_dest); /** - * edma_get_position - returns the current transfer points + * edma_get_position - returns the current transfer point * @slot: parameter RAM slot being examined - * @src: pointer to source port position - * @dst: pointer to destination port position + * @dst: true selects the dest position, false the source * - * Returns current source and destination addresses for a particular - * parameter RAM slot. Its channel should not be active when this is called. + * Returns the position of the current active slot */ -void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +dma_addr_t edma_get_position(unsigned slot, bool dst) { - struct edmacc_param temp; - unsigned ctlr; + u32 offs, ctlr = EDMA_CTLR(slot); - ctlr = EDMA_CTLR(slot); slot = EDMA_CHAN_SLOT(slot); - edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp); - if (src != NULL) - *src = temp.src; - if (dst != NULL) - *dst = temp.dst; + offs = PARM_OFFSET(slot); + offs += dst ? PARM_DST : PARM_SRC; + + return edma_read(ctlr, offs); } -EXPORT_SYMBOL(edma_get_position); /** * edma_set_src_index - configure DMA source address indexing @@ -1421,6 +1414,67 @@ void edma_clear_event(unsigned channel) } EXPORT_SYMBOL(edma_clear_event); +static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, + struct edma *edma_cc) +{ + int i; + u32 value, cccfg; + s8 (*queue_priority_map)[2]; + + /* Decode the eDMA3 configuration from CCCFG register */ + cccfg = edma_read(0, EDMA_CCCFG); + + value = GET_NUM_REGN(cccfg); + edma_cc->num_region = BIT(value); + + value = GET_NUM_DMACH(cccfg); + edma_cc->num_channels = BIT(value + 1); + + value = GET_NUM_PAENTRY(cccfg); + edma_cc->num_slots = BIT(value + 4); + + value = GET_NUM_EVQUE(cccfg); + edma_cc->num_tc = value + 1; + + dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg); + dev_dbg(dev, "num_region: %u\n", edma_cc->num_region); + dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels); + dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots); + dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc); + + /* Nothing need to be done if queue priority is provided */ + if (pdata->queue_priority_mapping) + return 0; + + /* + * Configure TC/queue priority as follows: + * Q0 - priority 0 + * Q1 - priority 1 + * Q2 - priority 2 + * ... + * The meaning of priority numbers: 0 highest priority, 7 lowest + * priority. So Q0 is the highest priority queue and the last queue has + * the lowest priority. + */ + queue_priority_map = devm_kzalloc(dev, + (edma_cc->num_tc + 1) * sizeof(s8), + GFP_KERNEL); + if (!queue_priority_map) + return -ENOMEM; + + for (i = 0; i < edma_cc->num_tc; i++) { + queue_priority_map[i][0] = i; + queue_priority_map[i][1] = i; + } + queue_priority_map[i][0] = -1; + queue_priority_map[i][1] = -1; + + pdata->queue_priority_mapping = queue_priority_map; + pdata->default_queue = 0; + + return 0; +} + #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES) static int edma_xbar_event_map(struct device *dev, struct device_node *node, @@ -1471,65 +1525,16 @@ static int edma_of_parse_dt(struct device *dev, struct device_node *node, struct edma_soc_info *pdata) { - int ret = 0, i; - u32 value; + int ret = 0; struct property *prop; size_t sz; struct edma_rsv_info *rsv_info; - s8 (*queue_tc_map)[2], (*queue_priority_map)[2]; - - memset(pdata, 0, sizeof(struct edma_soc_info)); - - ret = of_property_read_u32(node, "dma-channels", &value); - if (ret < 0) - return ret; - pdata->n_channel = value; - - ret = of_property_read_u32(node, "ti,edma-regions", &value); - if (ret < 0) - return ret; - pdata->n_region = value; - - ret = of_property_read_u32(node, "ti,edma-slots", &value); - if (ret < 0) - return ret; - pdata->n_slot = value; - - pdata->n_cc = 1; rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL); if (!rsv_info) return -ENOMEM; pdata->rsv = rsv_info; - queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); - if (!queue_tc_map) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - queue_tc_map[i][0] = i; - queue_tc_map[i][1] = i; - } - queue_tc_map[i][0] = -1; - queue_tc_map[i][1] = -1; - - pdata->queue_tc_mapping = queue_tc_map; - - queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); - if (!queue_priority_map) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - queue_priority_map[i][0] = i; - queue_priority_map[i][1] = i; - } - queue_priority_map[i][0] = -1; - queue_priority_map[i][1] = -1; - - pdata->queue_priority_mapping = queue_priority_map; - - pdata->default_queue = 0; - prop = of_find_property(node, "ti,edma-xbar-event-map", &sz); if (prop) ret = edma_xbar_event_map(dev, node, pdata, sz); @@ -1556,6 +1561,7 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, return ERR_PTR(ret); dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap); + dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap); of_dma_controller_register(dev->of_node, of_dma_simple_xlate, &edma_filter_info); @@ -1574,7 +1580,6 @@ static int edma_probe(struct platform_device *pdev) struct edma_soc_info **info = pdev->dev.platform_data; struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL}; s8 (*queue_priority_mapping)[2]; - s8 (*queue_tc_mapping)[2]; int i, j, off, ln, found = 0; int status = -1; const s16 (*rsv_chans)[2]; @@ -1585,7 +1590,6 @@ static int edma_probe(struct platform_device *pdev) struct resource *r[EDMA_MAX_CC] = {NULL}; struct resource res[EDMA_MAX_CC]; char res_name[10]; - char irq_name[10]; struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; int ret; @@ -1650,12 +1654,10 @@ static int edma_probe(struct platform_device *pdev) if (!edma_cc[j]) return -ENOMEM; - edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel, - EDMA_MAX_DMACH); - edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot, - EDMA_MAX_PARAMENTRY); - edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc, - EDMA_MAX_CC); + /* Get eDMA3 configuration from IP */ + ret = edma_setup_from_hw(dev, info[j], edma_cc[j]); + if (ret) + return ret; edma_cc[j]->default_queue = info[j]->default_queue; @@ -1707,14 +1709,21 @@ static int edma_probe(struct platform_device *pdev) if (node) { irq[j] = irq_of_parse_and_map(node, 0); + err_irq[j] = irq_of_parse_and_map(node, 2); } else { + char irq_name[10]; + sprintf(irq_name, "edma%d", j); irq[j] = platform_get_irq_byname(pdev, irq_name); + + sprintf(irq_name, "edma%d_err", j); + err_irq[j] = platform_get_irq_byname(pdev, irq_name); } edma_cc[j]->irq_res_start = irq[j]; - status = devm_request_irq(&pdev->dev, irq[j], - dma_irq_handler, 0, "edma", - &pdev->dev); + edma_cc[j]->irq_res_end = err_irq[j]; + + status = devm_request_irq(dev, irq[j], dma_irq_handler, 0, + "edma", dev); if (status < 0) { dev_dbg(&pdev->dev, "devm_request_irq %d failed --> %d\n", @@ -1722,16 +1731,8 @@ static int edma_probe(struct platform_device *pdev) return status; } - if (node) { - err_irq[j] = irq_of_parse_and_map(node, 2); - } else { - sprintf(irq_name, "edma%d_err", j); - err_irq[j] = platform_get_irq_byname(pdev, irq_name); - } - edma_cc[j]->irq_res_end = err_irq[j]; - status = devm_request_irq(&pdev->dev, err_irq[j], - dma_ccerr_handler, 0, - "edma_error", &pdev->dev); + status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0, + "edma_error", dev); if (status < 0) { dev_dbg(&pdev->dev, "devm_request_irq %d failed --> %d\n", @@ -1742,14 +1743,8 @@ static int edma_probe(struct platform_device *pdev) for (i = 0; i < edma_cc[j]->num_channels; i++) map_dmach_queue(j, i, info[j]->default_queue); - queue_tc_mapping = info[j]->queue_tc_mapping; queue_priority_mapping = info[j]->queue_priority_mapping; - /* Event queue to TC mapping */ - for (i = 0; queue_tc_mapping[i][0] != -1; i++) - map_queue_tc(j, queue_tc_mapping[i][0], - queue_tc_mapping[i][1]); - /* Event queue priority mapping */ for (i = 0; queue_priority_mapping[i][0] != -1; i++) assign_priority_to_queue(j, @@ -1762,7 +1757,7 @@ static int edma_probe(struct platform_device *pdev) if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) map_dmach_param(j); - for (i = 0; i < info[j]->n_region; i++) { + for (i = 0; i < edma_cc[j]->num_region; i++) { edma_write_array2(j, EDMA_DRAE, i, 0, 0x0); edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); edma_write_array(j, EDMA_QRAE, i, 0x0); diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 86fd60fefbc9..f91136ab447e 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -106,14 +106,14 @@ void mcpm_cpu_power_down(void) BUG(); } -int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster) +int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster) { int ret; - if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down_finish)) + if (WARN_ON_ONCE(!platform_ops || !platform_ops->wait_for_powerdown)) return -EUNATCH; - ret = platform_ops->power_down_finish(cpu, cluster); + ret = platform_ops->wait_for_powerdown(cpu, cluster); if (ret) pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n", __func__, cpu, cluster, ret); diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 177251a4dd9a..92e54d7c6f46 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -62,7 +62,7 @@ static int mcpm_cpu_kill(unsigned int cpu) cpu_to_pcpu(cpu, &pcpu, &pcluster); - return !mcpm_cpu_power_down_finish(pcpu, pcluster); + return !mcpm_wait_for_cpu_powerdown(pcpu, pcluster); } static int mcpm_cpu_disable(unsigned int cpu) diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index e181a50fd65a..c6661a60025d 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y @@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 85f846ae9ff2..5d7797d43d23 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -45,7 +45,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -65,6 +64,8 @@ CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig new file mode 100644 index 000000000000..d3260d7d5af1 --- /dev/null +++ b/arch/arm/configs/axm55xx_defconfig @@ -0,0 +1,248 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_SCHED_AUTOGROUP=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARCH_AXXIA=y +CONFIG_GPIO_PCA953X=y +CONFIG_ARM_LPAE=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_643719=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_754327=y +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_ERRATA_798181=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_AXXIA=y +CONFIG_SMP=y +CONFIG_NR_CPUS=16 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_HIGHMEM=y +CONFIG_KSM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=y +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_BRIDGE=y +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_UEVENT=y +CONFIG_NETDEVICES=y +CONFIG_TUN=y +CONFIG_VETH=y +CONFIG_VIRTIO_NET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_WLAN is not set +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y +CONFIG_I2C_AXXIA=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_DP83640_PHY=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PL061=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_AXXIA=y +CONFIG_SENSORS_ADT7475=y +CONFIG_SENSORS_JC42=y +CONFIG_SENSORS_LM75=y +CONFIG_PMBUS=y +CONFIG_SENSORS_LTC2978=y +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_ZEROPLUS=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_AXXIA=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_DMADEVICES=y +CONFIG_PL330_DMA=y +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO_MMIO=y +CONFIG_MAILBOX=y +CONFIG_PL320_MBOX=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=y +CONFIG_FSCACHE=y +CONFIG_FSCACHE_STATS=y +CONFIG_FSCACHE_HISTOGRAM=y +CONFIG_FSCACHE_DEBUG=y +CONFIG_FSCACHE_OBJECT_LIST=y +CONFIG_CACHEFILES=y +CONFIG_CACHEFILES_HISTOGRAM=y +CONFIG_ISO9660_FS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFS_FSCACHE=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 5b54abbeb0b3..0494c8f229a2 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -73,8 +73,6 @@ CONFIG_SA1100_WATCHDOG=m CONFIG_SOUND=y CONFIG_SOUND_PRIME=y CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 3df3f3a79ef4..9d13dae99125 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -91,6 +91,7 @@ CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y @@ -104,6 +105,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_PWM=y +CONFIG_PWM_BCM_KONA=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index a93ff8da5bab..dc01c049a520 100644 --- a/arch/arm/configs/cm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -144,7 +144,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index f4b767256f95..7df040e91c1c 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -129,7 +129,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 2ef2c5e8aaec..18c311ae1113 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -124,7 +124,6 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_SERIAL=m CONFIG_USB_GADGET=m diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index b985334e42dd..be02fe2b14cb 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -47,9 +47,7 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 1fd1d1de3220..c1470a00f55a 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -172,7 +172,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_CS=m diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 2a282c051cfd..f95f72d62db7 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -157,10 +157,8 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_MUSB_HDRC=m -CONFIG_USB_MUSB_PERIPHERAL=y CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index f15955144175..701677f9248c 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -37,7 +37,6 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -48,6 +47,7 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index 60a21e01eb70..4560c9ca6636 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -144,7 +144,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 6ac5ea73bd0a..1b650c85bdd0 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -80,7 +80,6 @@ CONFIG_I2C_DEBUG_BUS=y CONFIG_WATCHDOG=y CONFIG_EP93XX_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 4ce7b70ea901..e07a227ec0db 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_EXYNOS5=y CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 038518ab39a8..87e020f303ab 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -100,8 +100,6 @@ CONFIG_FB_CYBER2000=y CONFIG_SOUND=m # CONFIG_USB_HID is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_PRINTER=m CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index f1aeb7d72712..bada59d93b67 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -80,6 +80,7 @@ CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_ATA=y +CONFIG_BLK_DEV_SD=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y CONFIG_CS89x0=y @@ -153,8 +154,12 @@ CONFIG_USB_HID=m CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -177,7 +182,6 @@ CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y -CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 09e974392fa1..ef8815327e5b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -1,4 +1,3 @@ -# CONFIG_LOCALVERSION_AUTO is not set CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y @@ -33,7 +32,6 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y -CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y @@ -46,7 +44,11 @@ CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_HIGHMEM=y +CONFIG_CMA=y CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_ARM_IMX6Q_CPUFREQ=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=m @@ -72,6 +74,7 @@ CONFIG_RFKILL_INPUT=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set +CONFIG_DMA_CMA=y CONFIG_IMX_WEIM=y CONFIG_CONNECTOR=y CONFIG_MTD=y @@ -89,6 +92,7 @@ CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_NAND_MXC=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -183,6 +187,7 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_DRM=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y @@ -215,7 +220,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -245,7 +249,7 @@ CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_LDB=y CONFIG_DRM_IMX_IPUV3_CORE=y CONFIG_DRM_IMX_IPUV3=y -CONFIG_COMMON_CLK_DEBUG=y +CONFIG_DRM_IMX_HDMI=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PWM=y CONFIG_PWM_IMX=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 5bae19557591..c1f5adc5493e 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -73,7 +73,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL030=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_EXT2_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 063e2ab2c8f1..1af665e847d1 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -169,7 +169,6 @@ CONFIG_SENSORS_W83781D=y CONFIG_WATCHDOG=y CONFIG_IXP4XX_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index ec9a41d50680..932ae40fb128 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -112,6 +112,7 @@ CONFIG_MTD_PLATRAM=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_DAVINCI=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y @@ -131,11 +132,13 @@ CONFIG_SPI=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_KEYSTONE=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y CONFIG_DAVINCI_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_XHCI_HCD=y @@ -146,7 +149,6 @@ CONFIG_USB_DWC3_VERBOSE=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=y CONFIG_EXT4_FS=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 2e762d94e94b..b9e480c10b10 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -61,6 +61,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index 12bd1f63c399..bd097d455f87 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -106,7 +106,6 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_SH4_FSI=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index a07948a87caa..9c93f5655248 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -217,7 +217,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index c5858b9eb516..7f52dad97f51 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -17,21 +17,14 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_MSM_DT=y -CONFIG_ARCH_MSM8X60=y -CONFIG_ARCH_MSM8960=y -CONFIG_ARCH_MSM8974=y -CONFIG_SMP=y +CONFIG_ARCH_MSM=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_CLEANCACHE=y -CONFIG_CC_STACKPROTECTOR=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y -CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y @@ -79,16 +72,12 @@ CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MSM=y +# CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y CONFIG_REGULATOR=y CONFIG_MEDIA_SUPPORT=y @@ -100,25 +89,17 @@ CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_SPI is not set # CONFIG_SND_USB is not set CONFIG_SND_SOC=y -CONFIG_HID_BATTERY_STRENGTH=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MSM=y CONFIG_USB_ACM=y CONFIG_USB_SERIAL=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_NEW_LEDS=y CONFIG_RTC_CLASS=y CONFIG_STAGING=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_MSM_GCC_8660=y -CONFIG_MSM_MMCC_8960=y -CONFIG_MSM_MMCC_8974=y -CONFIG_MSM_IOMMU=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index aa3dfb084fed..5ebfa8bf8509 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -11,7 +11,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_T5325=y CONFIG_ARCH_MXC=y CONFIG_MACH_IMX25_DT=y CONFIG_MACH_IMX27_DT=y @@ -108,6 +107,8 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_KIRKWOOD_SOC_T5325=y +CONFIG_SND_SOC_ALC5623=y +CONFIG_SND_SIMPLE_CARD=y # CONFIG_ABX500_CORE is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index d4e8a47a2f7c..e2d62048e198 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -5,9 +5,11 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_VIRT=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -15,12 +17,12 @@ CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_ARCH_BCM=y -CONFIG_ARCH_BCM_5301X=y CONFIG_ARCH_BCM_MOBILE=y +CONFIG_ARCH_BCM_5301X=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y -CONFIG_GPIO_PCA953X=y +CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HI3xxx=y CONFIG_ARCH_KEYSTONE=y @@ -34,8 +36,8 @@ CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y -CONFIG_SOC_DRA7XX=y CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y @@ -47,6 +49,7 @@ CONFIG_ARCH_SPEAR13XX=y CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y +CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y @@ -61,7 +64,6 @@ CONFIG_MACH_SNOWBALL=y CONFIG_MACH_UX500_DT=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_CA9X4=y -CONFIG_ARCH_VIRT=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y CONFIG_NEON=y @@ -71,6 +73,7 @@ CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y CONFIG_SMP=y +CONFIG_NR_CPUS=8 CONFIG_HIGHPTE=y CONFIG_CMA=y CONFIG_ARM_APPENDED_DTB=y @@ -96,6 +99,11 @@ CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y +CONFIG_CAN_DEV=y +CONFIG_CAN_MCP251X=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_RFKILL=y @@ -112,15 +120,19 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_ICS932S401=y CONFIG_APDS9802ALS=y CONFIG_ISL29003=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_SUNXI_SID=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_SUNXI=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y +CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y @@ -153,6 +165,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_SIRFSOC=y CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_TEGRA=y @@ -175,7 +189,9 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y +CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y @@ -184,6 +200,8 @@ CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_SIRF=y +CONFIG_SPI_SUN4I=y +CONFIG_SPI_SUN6I=y CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y @@ -191,6 +209,8 @@ CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y @@ -200,16 +220,19 @@ CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_SUN6I=y CONFIG_SENSORS_LM90=y CONFIG_THERMAL=y CONFIG_DOVE_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AS3722=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y @@ -220,6 +243,8 @@ CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_S2MPS11=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS65090=y @@ -254,10 +279,13 @@ CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y @@ -272,20 +300,28 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_ESDHC_IMX=y -CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_DOVE=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y +CONFIG_MMC_SUNXI=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_EXYNOS=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y @@ -294,6 +330,7 @@ CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y +CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y CONFIG_DMADEVICES=y @@ -328,6 +365,7 @@ CONFIG_PWM=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_OMAP_USB2=y +CONFIG_PHY_SUN4I_USB=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 1f08219c1b3c..0dae1c1f007a 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -80,7 +80,6 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index 36484a37a1ca..27c732fdf21e 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -1,4 +1,5 @@ CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 @@ -11,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_T5325=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y @@ -50,6 +50,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set @@ -100,6 +101,8 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_KIRKWOOD_SOC_T5325=y +CONFIG_SND_SOC_ALC5623=y +CONFIG_SND_SIMPLE_CARD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_HID_DRAGONRISE=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index a34713d8db9f..e11170e37442 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -1,5 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +18,7 @@ CONFIG_NEON=y # CONFIG_CACHE_L2X0 is not set # CONFIG_SWP_EMULATE is not set CONFIG_PCI=y +CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_SMP=y CONFIG_AEABI=y @@ -29,6 +31,9 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y CONFIG_NET=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y CONFIG_BT=y CONFIG_BT_MRVL=y CONFIG_BT_MRVL_SDIO=y @@ -36,6 +41,7 @@ CONFIG_CFG80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_SD=y CONFIG_ATA=y +CONFIG_AHCI_MVEBU=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MVNETA=y @@ -53,6 +59,7 @@ CONFIG_I2C_MV64XXX=y CONFIG_MTD=y CONFIG_MTD_CHAR=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y @@ -78,7 +85,9 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MVEBU=y CONFIG_MMC=y +CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_MVSDIO=y CONFIG_NEW_LEDS=y CONFIG_LEDS_GPIO=y @@ -103,6 +112,8 @@ CONFIG_UDF_FS=m CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6150108e15de..a9f992335eb2 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -26,7 +26,6 @@ CONFIG_ARCH_MXS=y # CONFIG_ARM_THUMB is not set CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -51,10 +50,10 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y -# CONFIG_M25PXX_USE_FAST_READ is not set CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y # CONFIG_BLK_DEV is not set CONFIG_EEPROM_AT24=y @@ -120,7 +119,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_MXS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -138,7 +136,6 @@ CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y CONFIG_STAGING=y CONFIG_MXS_LRADC=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_IIO=y CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_PWM=y @@ -180,7 +177,7 @@ CONFIG_BLK_DEV_IO_TRACE=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_USER=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set +CONFIG_CRYPTO_DEV_MXS_DCP=y CONFIG_CRC_ITU_T=m CONFIG_CRC7=m CONFIG_FONTS=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index d7dc9922cfff..460dca4a4f98 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -68,8 +68,6 @@ CONFIG_SOUND=y CONFIG_SOUND_PRIME=y # CONFIG_USB_HID is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index d74edbad18fc..ce541bb3c2de 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -197,8 +197,6 @@ CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_PHY=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a4e8d017f25b..59066cf0271a 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -21,6 +21,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V6=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y CONFIG_ARCH_OMAP2=y @@ -42,6 +44,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y +CONFIG_CPU_IDLE=y CONFIG_BINFMT_MISC=y CONFIG_PM_DEBUG=y CONFIG_NET=y @@ -159,11 +162,14 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y +CONFIG_POWER_AVS=y CONFIG_SENSORS_LM75=m CONFIG_THERMAL=y CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_USER_SPACE=y +CONFIG_CPU_THERMAL=y CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y CONFIG_DRA752_THERMAL=y @@ -177,6 +183,7 @@ CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y @@ -217,7 +224,6 @@ CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_WDM=y @@ -239,6 +245,7 @@ CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 2f136c30a989..0a847d04ddc1 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -76,7 +76,6 @@ CONFIG_SND_PCM_OSS=y CONFIG_SND_PXA2XX_AC97=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig new file mode 100644 index 000000000000..42ebd72799e6 --- /dev/null +++ b/arch/arm/configs/qcom_defconfig @@ -0,0 +1,165 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MSM8960=y +CONFIG_ARCH_MSM8974=y +CONFIG_SMP=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_CLEANCACHE=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_CFG80211=y +CONFIG_RFKILL=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_SCSI_TGT=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_GPIO=y +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_MOUSE_PS2 is not set +CONFIG_INPUT_JOYSTICK=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_MSM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_QUP=y +CONFIG_SPI=y +CONFIG_SPI_QUP=y +CONFIG_SPMI=y +CONFIG_PINCTRL_APQ8064=y +CONFIG_PINCTRL_IPQ8064=y +CONFIG_PINCTRL_MSM8X74=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_MSM=y +CONFIG_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_FB=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_ACM=y +CONFIG_USB_SERIAL=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_MSM=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_STAGING=y +CONFIG_QCOM_GSBI=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_MSM_GCC_8660=y +CONFIG_MSM_MMCC_8960=y +CONFIG_MSM_MMCC_8974=y +CONFIG_MSM_IOMMU=y +CONFIG_GENERIC_PHY=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_CIFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig index f7caa909b40d..3d833aea545a 100644 --- a/arch/arm/configs/raumfeld_defconfig +++ b/arch/arm/configs/raumfeld_defconfig @@ -122,7 +122,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index abe61bf379d2..1da5d9e48224 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -76,8 +76,10 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 7079cbe898a8..d02e9d911bb7 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -75,8 +75,10 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 193448f31284..eb4d204bff47 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -324,7 +324,6 @@ CONFIG_SND_USB_CAIAQ=m CONFIG_SND_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 3a186d653dac..e2f9fa5bb54b 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -56,7 +56,6 @@ CONFIG_SND_S3C24XX_SOC=m CONFIG_SND_SOC_SMDK_WM9713=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index dc3881e07630..4414990521d3 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -122,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y @@ -138,6 +137,8 @@ CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_SSB=m +CONFIG_REGULATOR=y +CONFIG_REGULATOR_ACT8865=y CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 83b07258a385..6d6437cbbc52 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -25,6 +25,7 @@ CONFIG_SCHED_MC=y CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_NR_CPUS=8 CONFIG_AEABI=y +CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -43,6 +44,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_M25P80=y +CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_RCAR=y @@ -75,9 +77,11 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_I2C_GPIO=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y # CONFIG_HWMON is not set @@ -88,10 +92,14 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_PLATFORM=y CONFIG_VIDEO_RCAR_VIN=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_VSP1=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=y CONFIG_DRM=y @@ -100,7 +108,13 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_SOC_RCAR=y +CONFIG_USB=y CONFIG_USB_RCAR_GEN2_PHY=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_RENESAS_USBHS=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y CONFIG_MMC=y CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 2e0419d1b964..a1ede1966baf 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -166,7 +166,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_SL811_HCD=m diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 81ba78eaf54a..7209bfd62074 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -1,13 +1,17 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y +CONFIG_PERF_EVENTS=y CONFIG_ARCH_SUNXI=y CONFIG_SMP=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -25,8 +29,12 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_EEPROM_SUNXI_SID=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_AHCI_SUNXI=y CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y +# CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set @@ -34,38 +42,66 @@ CONFIG_SUN4I_EMAC=y # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SMSC is not set CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8 CONFIG_SERIAL_8250_RUNTIME_UARTS=8 CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y CONFIG_SPI=y +CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_SUN6I=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y -# CONFIG_USB_SUPPORT is not set +CONFIG_MFD_AXP20X=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_GPIO=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_MMC=y +CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_COMMON_CLK_DEBUG=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_INTF_SYSFS is not set +# CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_DRV_SUNXI=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PHY_SUN4I_USB=y +CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_NLS=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 71277a1591ba..7209a2caefcf 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -47,7 +47,6 @@ CONFIG_BLK_DEV_RAM_SIZE=10240 # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 2926281368ab..fb25e2982f64 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -73,6 +73,11 @@ CONFIG_INET6_IPCOMP=y CONFIG_IPV6_MIP6=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y +CONFIG_CAN_DEV=y +CONFIG_CAN_MCP251X=y CONFIG_BT=y CONFIG_BT_RFCOMM=y CONFIG_BT_BNEP=y @@ -90,6 +95,7 @@ CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_MTD=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_AD525X_DPOT=y @@ -97,6 +103,7 @@ CONFIG_AD525X_DPOT_I2C=y CONFIG_ICS932S401=y CONFIG_APDS9802ALS=y CONFIG_ISL29003=y +CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y @@ -112,6 +119,7 @@ CONFIG_USB_NET_SMSC95XX=y CONFIG_BRCMFMAC=m CONFIG_RT2X00=y CONFIG_RT2800USB=m +CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y @@ -181,6 +189,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -222,6 +231,7 @@ CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TPS6586X=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 3162173fa75a..932ee4e4a13a 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -165,7 +165,6 @@ CONFIG_SND_PXA2XX_AC97=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 073541a50e23..d52b4ffe2012 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -61,6 +61,9 @@ CONFIG_SND_ARMAACI=m CONFIG_MMC=y CONFIG_MMC_ARMMMCI=m CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index d36e0d3c86ec..0d717a5eff29 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -127,7 +127,6 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PXA2XX_AC97=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_ISP116X_HCD=m CONFIG_USB_SL811_HCD=m CONFIG_USB_R8A66597_HCD=m diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig index f0520176acd0..9e7a25639690 100644 --- a/arch/arm/configs/vt8500_v6_v7_defconfig +++ b/arch/arm/configs/vt8500_v6_v7_defconfig @@ -73,7 +73,6 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_VT8500=y CONFIG_DMADEVICES=y -CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PWM=y CONFIG_PWM_VT8500=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 731d4f985310..cd11da8b5123 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -132,7 +132,6 @@ CONFIG_SND_SOC=m CONFIG_SND_PXA2XX_SOC=m # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=m CONFIG_USB_ACM=m CONFIG_USB_STORAGE=m diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 23e728ecf8ab..f5a357601983 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -21,6 +21,7 @@ generic-y += parport.h generic-y += poll.h generic-y += preempt.h generic-y += resource.h +generic-y += rwsem.h generic-y += sections.h generic-y += segment.h generic-y += sembuf.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index b974184f9941..57f0584e8d97 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -312,7 +312,7 @@ * you cannot return to the original mode. */ .macro safe_svcmode_maskall reg:req -#if __LINUX_ARM_ARCH__ >= 6 +#if __LINUX_ARM_ARCH__ >= 6 && !defined(CONFIG_CPU_V7M) mrs \reg , cpsr eor \reg, \reg, #HYP_MODE tst \reg, #MODE_MASK diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 8b8b61685a34..fd43f7f55b70 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -212,7 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, static inline void __flush_icache_all(void) { __flush_icache_preferred(); - dsb(); + dsb(ishst); } /* @@ -487,4 +487,6 @@ int set_memory_rw(unsigned long addr, int numpages); int set_memory_x(unsigned long addr, int numpages); int set_memory_nx(unsigned long addr, int numpages); +void flush_uprobe_xol_access(struct page *page, unsigned long uaddr, + void *kaddr, unsigned long len); #endif diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 6493802f880a..c3f11524f10c 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -42,24 +42,23 @@ #ifndef __ASSEMBLY__ #if __LINUX_ARM_ARCH__ >= 4 -#define vectors_high() (cr_alignment & CR_V) +#define vectors_high() (get_cr() & CR_V) #else #define vectors_high() (0) #endif #ifdef CONFIG_CPU_CP15 -extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ -static inline unsigned int get_cr(void) +static inline unsigned long get_cr(void) { - unsigned int val; + unsigned long val; asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); return val; } -static inline void set_cr(unsigned int val) +static inline void set_cr(unsigned long val) { asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" : : "r" (val) : "cc"); @@ -80,10 +79,6 @@ static inline void set_auxcr(unsigned int val) isb(); } -#ifndef CONFIG_SMP -extern void adjust_cr(unsigned long mask, unsigned long set); -#endif - #define CPACC_FULL(n) (3 << (n * 2)) #define CPACC_SVC(n) (1 << (n * 2)) #define CPACC_DISABLE(n) (0 << (n * 2)) @@ -106,13 +101,17 @@ static inline void set_copro_access(unsigned int val) #else /* ifdef CONFIG_CPU_CP15 */ /* - * cr_alignment and cr_no_alignment are tightly coupled to cp15 (at least in the - * minds of the developers). Yielding 0 for machines without a cp15 (and making - * it read-only) is fine for most cases and saves quite some #ifdeffery. + * cr_alignment is tightly coupled to cp15 (at least in the minds of the + * developers). Yielding 0 for machines without a cp15 (and making it + * read-only) is fine for most cases and saves quite some #ifdeffery. */ -#define cr_no_alignment UL(0) #define cr_alignment UL(0) +static inline unsigned long get_cr(void) +{ + return 0; +} + #endif /* ifdef CONFIG_CPU_CP15 / else */ #endif /* ifndef __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 4764344367d4..8c2b7321a478 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -72,6 +72,7 @@ #define ARM_CPU_PART_CORTEX_A15 0xC0F0 #define ARM_CPU_PART_CORTEX_A7 0xC070 #define ARM_CPU_PART_CORTEX_A12 0xC0D0 +#define ARM_CPU_PART_CORTEX_A17 0xC0E0 #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 #define ARM_CPU_XSCALE_ARCH_V1 0x2000 diff --git a/arch/arm/include/asm/dcc.h b/arch/arm/include/asm/dcc.h new file mode 100644 index 000000000000..b74899de0774 --- /dev/null +++ b/arch/arm/include/asm/dcc.h @@ -0,0 +1,41 @@ +/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/barrier.h> + +static inline u32 __dcc_getstatus(void) +{ + u32 __ret; + asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" + : "=r" (__ret) : : "cc"); + + return __ret; +} + +static inline char __dcc_getchar(void) +{ + char __c; + + asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" + : "=r" (__c)); + isb(); + + return __c; +} + +static inline void __dcc_putchar(char c) +{ + asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" + : /* no output register */ + : "r" (c)); + isb(); +} diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index eec0a12c5c1d..8e3fcb924db6 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -18,7 +18,6 @@ struct dma_iommu_mapping { unsigned int extensions; size_t bitmap_size; /* size of a single bitmap */ size_t bits; /* per bitmap */ - unsigned int size; /* per bitmap */ dma_addr_t base; spinlock_t lock; diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index e701a4d9aa59..c45b61a4b4a5 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -58,21 +58,37 @@ static inline int dma_set_mask(struct device *dev, u64 mask) #ifndef __arch_pfn_to_dma static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn) { + if (dev) + pfn -= dev->dma_pfn_offset; return (dma_addr_t)__pfn_to_bus(pfn); } static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) { - return __bus_to_pfn(addr); + unsigned long pfn = __bus_to_pfn(addr); + + if (dev) + pfn += dev->dma_pfn_offset; + + return pfn; } static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { + if (dev) { + unsigned long pfn = dma_to_pfn(dev, addr); + + return phys_to_virt(__pfn_to_phys(pfn)); + } + return (void *)__bus_to_virt((unsigned long)addr); } static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) { + if (dev) + return pfn_to_dma(dev, virt_to_pfn(addr)); + return (dma_addr_t)__virt_to_bus((unsigned long)(addr)); } @@ -105,6 +121,13 @@ static inline unsigned long dma_max_pfn(struct device *dev) } #define dma_max_pfn(dev) dma_max_pfn(dev) +static inline int set_arch_dma_coherent_ops(struct device *dev) +{ + set_dma_ops(dev, &arm_coherent_dma_ops); + return 0; +} +#define set_arch_dma_coherent_ops(dev) set_arch_dma_coherent_ops(dev) + static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) { unsigned int offset = paddr & ~PAGE_MASK; diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h index bbae919bceb4..74124b0d0d79 100644 --- a/arch/arm/include/asm/fixmap.h +++ b/arch/arm/include/asm/fixmap.h @@ -1,24 +1,11 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -/* - * Nothing too fancy for now. - * - * On ARM we already have well known fixed virtual addresses imposed by - * the architecture such as the vector page which is located at 0xffff0000, - * therefore a second level page table is already allocated covering - * 0xfff00000 upwards. - * - * The cache flushing code in proc-xscale.S uses the virtual area between - * 0xfffe0000 and 0xfffeffff. - */ - -#define FIXADDR_START 0xfff00000UL -#define FIXADDR_TOP 0xfffe0000UL +#define FIXADDR_START 0xffc00000UL +#define FIXADDR_TOP 0xffe00000UL #define FIXADDR_SIZE (FIXADDR_TOP - FIXADDR_START) -#define FIX_KMAP_BEGIN 0 -#define FIX_KMAP_END (FIXADDR_SIZE >> PAGE_SHIFT) +#define FIX_KMAP_NR_PTES (FIXADDR_SIZE >> PAGE_SHIFT) #define __fix_to_virt(x) (FIXADDR_START + ((x) << PAGE_SHIFT)) #define __virt_to_fix(x) (((x) - FIXADDR_START) >> PAGE_SHIFT) @@ -27,7 +14,7 @@ extern void __this_fixmap_does_not_exist(void); static inline unsigned long fix_to_virt(const unsigned int idx) { - if (idx >= FIX_KMAP_END) + if (idx >= FIX_KMAP_NR_PTES) __this_fixmap_does_not_exist(); return __fix_to_virt(idx); } diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index f89515adac60..eb577f4f5f70 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -52,15 +52,7 @@ extern inline void *return_address(unsigned int level) #endif -#define HAVE_ARCH_CALLER_ADDR - -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)return_address(1)) -#define CALLER_ADDR2 ((unsigned long)return_address(2)) -#define CALLER_ADDR3 ((unsigned long)return_address(3)) -#define CALLER_ADDR4 ((unsigned long)return_address(4)) -#define CALLER_ADDR5 ((unsigned long)return_address(5)) -#define CALLER_ADDR6 ((unsigned long)return_address(6)) +#define ftrace_return_addr(n) return_address(n) #endif /* ifndef __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index c81adc08b3fb..a3c24cd5b7c8 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -130,22 +130,22 @@ #endif #ifndef __ASSEMBLER__ -extern inline void nop_flush_icache_all(void) { } -extern inline void nop_flush_kern_cache_all(void) { } -extern inline void nop_flush_kern_cache_louis(void) { } -extern inline void nop_flush_user_cache_all(void) { } -extern inline void nop_flush_user_cache_range(unsigned long a, +static inline void nop_flush_icache_all(void) { } +static inline void nop_flush_kern_cache_all(void) { } +static inline void nop_flush_kern_cache_louis(void) { } +static inline void nop_flush_user_cache_all(void) { } +static inline void nop_flush_user_cache_range(unsigned long a, unsigned long b, unsigned int c) { } -extern inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { } -extern inline int nop_coherent_user_range(unsigned long a, +static inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { } +static inline int nop_coherent_user_range(unsigned long a, unsigned long b) { return 0; } -extern inline void nop_flush_kern_dcache_area(void *a, size_t s) { } +static inline void nop_flush_kern_dcache_area(void *a, size_t s) { } -extern inline void nop_dma_flush_range(const void *a, const void *b) { } +static inline void nop_dma_flush_range(const void *a, const void *b) { } -extern inline void nop_dma_map_area(const void *s, size_t l, int f) { } -extern inline void nop_dma_unmap_area(const void *s, size_t l, int f) { } +static inline void nop_dma_map_area(const void *s, size_t l, int f) { } +static inline void nop_dma_unmap_area(const void *s, size_t l, int f) { } #endif #ifndef MULTI_CACHE diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h index 6b70f1b46a6e..04e18b656659 100644 --- a/arch/arm/include/asm/glue-df.h +++ b/arch/arm/include/asm/glue-df.h @@ -31,14 +31,6 @@ #undef CPU_DABORT_HANDLER #undef MULTI_DABORT -#if defined(CONFIG_CPU_ARM710) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm7_data_abort -# endif -#endif - #ifdef CONFIG_CPU_ABRT_EV4 # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 6795ff743b3d..3a5ec1c25659 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -26,8 +26,8 @@ #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 -#define L2X0_TAG_LATENCY_CTRL 0x108 -#define L2X0_DATA_LATENCY_CTRL 0x10C +#define L310_TAG_LATENCY_CTRL 0x108 +#define L310_DATA_LATENCY_CTRL 0x10C #define L2X0_EVENT_CNT_CTRL 0x200 #define L2X0_EVENT_CNT1_CFG 0x204 #define L2X0_EVENT_CNT0_CFG 0x208 @@ -54,53 +54,93 @@ #define L2X0_LOCKDOWN_WAY_D_BASE 0x900 #define L2X0_LOCKDOWN_WAY_I_BASE 0x904 #define L2X0_LOCKDOWN_STRIDE 0x08 -#define L2X0_ADDR_FILTER_START 0xC00 -#define L2X0_ADDR_FILTER_END 0xC04 +#define L310_ADDR_FILTER_START 0xC00 +#define L310_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 #define L2X0_DEBUG_CTRL 0xF40 -#define L2X0_PREFETCH_CTRL 0xF60 -#define L2X0_POWER_CTRL 0xF80 -#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1) -#define L2X0_STNDBY_MODE_EN (1 << 0) +#define L310_PREFETCH_CTRL 0xF60 +#define L310_POWER_CTRL 0xF80 +#define L310_DYNAMIC_CLK_GATING_EN (1 << 1) +#define L310_STNDBY_MODE_EN (1 << 0) /* Registers shifts and masks */ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) +#define L2X0_CACHE_ID_PART_L220 (2 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) #define L2X0_CACHE_ID_RTL_MASK 0x3f -#define L2X0_CACHE_ID_RTL_R0P0 0x0 -#define L2X0_CACHE_ID_RTL_R1P0 0x2 -#define L2X0_CACHE_ID_RTL_R2P0 0x4 -#define L2X0_CACHE_ID_RTL_R3P0 0x5 -#define L2X0_CACHE_ID_RTL_R3P1 0x6 -#define L2X0_CACHE_ID_RTL_R3P2 0x8 +#define L210_CACHE_ID_RTL_R0P2_02 0x00 +#define L210_CACHE_ID_RTL_R0P1 0x01 +#define L210_CACHE_ID_RTL_R0P2_01 0x02 +#define L210_CACHE_ID_RTL_R0P3 0x03 +#define L210_CACHE_ID_RTL_R0P4 0x0b +#define L210_CACHE_ID_RTL_R0P5 0x0f +#define L220_CACHE_ID_RTL_R1P7_01REL0 0x06 +#define L310_CACHE_ID_RTL_R0P0 0x00 +#define L310_CACHE_ID_RTL_R1P0 0x02 +#define L310_CACHE_ID_RTL_R2P0 0x04 +#define L310_CACHE_ID_RTL_R3P0 0x05 +#define L310_CACHE_ID_RTL_R3P1 0x06 +#define L310_CACHE_ID_RTL_R3P1_50REL0 0x07 +#define L310_CACHE_ID_RTL_R3P2 0x08 +#define L310_CACHE_ID_RTL_R3P3 0x09 -#define L2X0_AUX_CTRL_MASK 0xc0000fff +/* L2C auxiliary control register - bits common to L2C-210/220/310 */ +#define L2C_AUX_CTRL_WAY_SIZE_SHIFT 17 +#define L2C_AUX_CTRL_WAY_SIZE_MASK (7 << 17) +#define L2C_AUX_CTRL_WAY_SIZE(n) ((n) << 17) +#define L2C_AUX_CTRL_EVTMON_ENABLE BIT(20) +#define L2C_AUX_CTRL_PARITY_ENABLE BIT(21) +#define L2C_AUX_CTRL_SHARED_OVERRIDE BIT(22) +/* L2C-210/220 common bits */ #define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 -#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK (7 << 0) #define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 -#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (7 << 3) #define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 -#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (7 << 6) #define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 -#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) -#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 -#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) -#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 -#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 -#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 -#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT 28 -#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 -#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (7 << 9) +#define L2X0_AUX_CTRL_ASSOC_SHIFT 13 +#define L2X0_AUX_CTRL_ASSOC_MASK (15 << 13) +/* L2C-210 specific bits */ +#define L210_AUX_CTRL_WRAP_DISABLE BIT(12) +#define L210_AUX_CTRL_WA_OVERRIDE BIT(23) +#define L210_AUX_CTRL_EXCLUSIVE_ABORT BIT(24) +/* L2C-220 specific bits */ +#define L220_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) +#define L220_AUX_CTRL_FWA_SHIFT 23 +#define L220_AUX_CTRL_FWA_MASK (3 << 23) +#define L220_AUX_CTRL_NS_LOCKDOWN BIT(26) +#define L220_AUX_CTRL_NS_INT_CTRL BIT(27) +/* L2C-310 specific bits */ +#define L310_AUX_CTRL_FULL_LINE_ZERO BIT(0) /* R2P0+ */ +#define L310_AUX_CTRL_HIGHPRIO_SO_DEV BIT(10) /* R2P0+ */ +#define L310_AUX_CTRL_STORE_LIMITATION BIT(11) /* R2P0+ */ +#define L310_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) +#define L310_AUX_CTRL_ASSOCIATIVITY_16 BIT(16) +#define L310_AUX_CTRL_CACHE_REPLACE_RR BIT(25) /* R2P0+ */ +#define L310_AUX_CTRL_NS_LOCKDOWN BIT(26) +#define L310_AUX_CTRL_NS_INT_CTRL BIT(27) +#define L310_AUX_CTRL_DATA_PREFETCH BIT(28) +#define L310_AUX_CTRL_INSTR_PREFETCH BIT(29) +#define L310_AUX_CTRL_EARLY_BRESP BIT(30) /* R2P0+ */ -#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 -#define L2X0_LATENCY_CTRL_RD_SHIFT 4 -#define L2X0_LATENCY_CTRL_WR_SHIFT 8 +#define L310_LATENCY_CTRL_SETUP(n) ((n) << 0) +#define L310_LATENCY_CTRL_RD(n) ((n) << 4) +#define L310_LATENCY_CTRL_WR(n) ((n) << 8) -#define L2X0_ADDR_FILTER_EN 1 +#define L310_ADDR_FILTER_EN 1 + +#define L310_PREFETCH_CTRL_OFFSET_MASK 0x1f +#define L310_PREFETCH_CTRL_DBL_LINEFILL_INCR BIT(23) +#define L310_PREFETCH_CTRL_PREFETCH_DROP BIT(24) +#define L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP BIT(27) +#define L310_PREFETCH_CTRL_DATA_PREFETCH BIT(28) +#define L310_PREFETCH_CTRL_INSTR_PREFETCH BIT(29) +#define L310_PREFETCH_CTRL_DBL_LINEFILL BIT(30) #define L2X0_CTRL_EN 1 diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 91b99abe7a95..535579511ed0 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -18,6 +18,7 @@ } while (0) extern pte_t *pkmap_page_table; +extern pte_t *fixmap_page_table; extern void *kmap_high(struct page *page); extern void kunmap_high(struct page *page); diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 8aa4cca74501..3d23418cbddd 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -179,6 +179,12 @@ static inline void __iomem *__typesafe_io(unsigned long addr) /* PCI fixed i/o mapping */ #define PCI_IO_VIRT_BASE 0xfee00000 +#if defined(CONFIG_PCI) +void pci_ioremap_set_mem_type(int mem_type); +#else +static inline void pci_ioremap_set_mem_type(int mem_type) {} +#endif + extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr); /* diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 09af14999c9b..193ceaf01bfd 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -36,7 +36,7 @@ #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_HAVE_ONE_REG -#define KVM_VCPU_MAX_FEATURES 1 +#define KVM_VCPU_MAX_FEATURES 2 #include <kvm/arm_vgic.h> diff --git a/arch/arm/include/asm/kvm_psci.h b/arch/arm/include/asm/kvm_psci.h index 9a83d98bf170..6bda945d31fa 100644 --- a/arch/arm/include/asm/kvm_psci.h +++ b/arch/arm/include/asm/kvm_psci.h @@ -18,6 +18,10 @@ #ifndef __ARM_KVM_PSCI_H__ #define __ARM_KVM_PSCI_H__ -bool kvm_psci_call(struct kvm_vcpu *vcpu); +#define KVM_ARM_PSCI_0_1 1 +#define KVM_ARM_PSCI_0_2 2 + +int kvm_psci_version(struct kvm_vcpu *vcpu); +int kvm_psci_call(struct kvm_vcpu *vcpu); #endif /* __ARM_KVM_PSCI_H__ */ diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 17a3fa2979e8..060a75e99263 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -14,7 +14,6 @@ #include <linux/reboot.h> struct tag; -struct meminfo; struct pt_regs; struct smp_operations; #ifdef CONFIG_SMP @@ -45,10 +44,12 @@ struct machine_desc { unsigned char reserve_lp1 :1; /* never has lp1 */ unsigned char reserve_lp2 :1; /* never has lp2 */ enum reboot_mode reboot_mode; /* default restart mode */ + unsigned l2c_aux_val; /* L2 cache aux value */ + unsigned l2c_aux_mask; /* L2 cache aux mask */ + void (*l2c_write_sec)(unsigned long, unsigned); struct smp_operations *smp; /* SMP operations */ bool (*smp_init)(void); - void (*fixup)(struct tag *, char **, - struct meminfo *); + void (*fixup)(struct tag *, char **); void (*init_meminfo)(void); void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index a5ff410dcdb6..d9702eb0b02b 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -98,14 +98,14 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster); * previously in which case the caller should take appropriate action. * * On success, the CPU is not guaranteed to be truly halted until - * mcpm_cpu_power_down_finish() subsequently returns non-zero for the + * mcpm_wait_for_cpu_powerdown() subsequently returns non-zero for the * specified cpu. Until then, other CPUs should make sure they do not * trash memory the target CPU might be executing/accessing. */ void mcpm_cpu_power_down(void); /** - * mcpm_cpu_power_down_finish - wait for a specified CPU to halt, and + * mcpm_wait_for_cpu_powerdown - wait for a specified CPU to halt, and * make sure it is powered off * * @cpu: CPU number within given cluster @@ -127,7 +127,7 @@ void mcpm_cpu_power_down(void); * - zero if the CPU is in a safely parked state * - nonzero otherwise (e.g., timeout) */ -int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster); +int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster); /** * mcpm_cpu_suspend - bring the calling CPU in a suspended state @@ -171,7 +171,7 @@ int mcpm_cpu_powered_up(void); struct mcpm_platform_ops { int (*power_up)(unsigned int cpu, unsigned int cluster); void (*power_down)(void); - int (*power_down_finish)(unsigned int cpu, unsigned int cluster); + int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); void (*suspend)(u64); void (*powered_up)(void); }; diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h index c2f5102ae659..bf47a6c110a2 100644 --- a/arch/arm/include/asm/memblock.h +++ b/arch/arm/include/asm/memblock.h @@ -1,10 +1,9 @@ #ifndef _ASM_ARM_MEMBLOCK_H #define _ASM_ARM_MEMBLOCK_H -struct meminfo; struct machine_desc; -void arm_memblock_init(struct meminfo *, const struct machine_desc *); +void arm_memblock_init(const struct machine_desc *); phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align); #endif diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 02fa2558f662..2b751464d6ff 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -83,8 +83,6 @@ */ #define IOREMAP_MAX_ORDER 24 -#define CONSISTENT_END (0xffe00000UL) - #else /* CONFIG_MMU */ /* diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index f94784f0e3a6..891a56b35bcf 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -28,53 +28,84 @@ struct outer_cache_fns { void (*clean_range)(unsigned long, unsigned long); void (*flush_range)(unsigned long, unsigned long); void (*flush_all)(void); - void (*inv_all)(void); void (*disable)(void); #ifdef CONFIG_OUTER_CACHE_SYNC void (*sync)(void); #endif - void (*set_debug)(unsigned long); void (*resume)(void); + + /* This is an ARM L2C thing */ + void (*write_sec)(unsigned long, unsigned); }; extern struct outer_cache_fns outer_cache; #ifdef CONFIG_OUTER_CACHE - +/** + * outer_inv_range - invalidate range of outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.inv_range) outer_cache.inv_range(start, end); } + +/** + * outer_clean_range - clean dirty outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.clean_range) outer_cache.clean_range(start, end); } + +/** + * outer_flush_range - clean and invalidate outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.flush_range) outer_cache.flush_range(start, end); } +/** + * outer_flush_all - clean and invalidate all cache lines in the outer cache + * + * Note: depending on implementation, this may not be atomic - it must + * only be called with interrupts disabled and no other active outer + * cache masters. + * + * It is intended that this function is only used by implementations + * needing to override the outer_cache.disable() method due to security. + * (Some implementations perform this as a clean followed by an invalidate.) + */ static inline void outer_flush_all(void) { if (outer_cache.flush_all) outer_cache.flush_all(); } -static inline void outer_inv_all(void) -{ - if (outer_cache.inv_all) - outer_cache.inv_all(); -} - -static inline void outer_disable(void) -{ - if (outer_cache.disable) - outer_cache.disable(); -} +/** + * outer_disable - clean, invalidate and disable the outer cache + * + * Disable the outer cache, ensuring that any data contained in the outer + * cache is pushed out to lower levels of system memory. The note and + * conditions above concerning outer_flush_all() applies here. + */ +extern void outer_disable(void); +/** + * outer_resume - restore the cache configuration and re-enable outer cache + * + * Restore any configuration that the cache had when previously enabled, + * and re-enable the outer cache. + */ static inline void outer_resume(void) { if (outer_cache.resume) @@ -90,13 +121,18 @@ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { } static inline void outer_flush_all(void) { } -static inline void outer_inv_all(void) { } static inline void outer_disable(void) { } static inline void outer_resume(void) { } #endif #ifdef CONFIG_OUTER_CACHE_SYNC +/** + * outer_sync - perform a sync point for outer cache + * + * Ensure that all outer cache operations are complete and any store + * buffers are drained. + */ static inline void outer_sync(void) { if (outer_cache.sync) diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 680a83e94467..7e95d8535e24 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -31,11 +31,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) } #endif /* CONFIG_PCI_DOMAINS */ -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - /* * The PCI address space does equal the physical memory address space. * The networking and block device layers use this boolean for bounce diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index b681575ad3de..cd94ef2ef283 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -14,7 +14,6 @@ #ifdef CONFIG_OF extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys); -extern void arm_dt_memblock_reserve(void); extern void __init arm_dt_init_cpu_maps(void); #else /* CONFIG_OF */ @@ -24,7 +23,6 @@ static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys) return NULL; } -static inline void arm_dt_memblock_reserve(void) { } static inline void arm_dt_init_cpu_maps(void) { } #endif /* CONFIG_OF */ diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index c4ae171850f8..c25ef3ec6d1f 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -29,16 +29,19 @@ struct psci_operations { int (*cpu_off)(struct psci_power_state state); int (*cpu_on)(unsigned long cpuid, unsigned long entry_point); int (*migrate)(unsigned long cpuid); + int (*affinity_info)(unsigned long target_affinity, + unsigned long lowest_affinity_level); + int (*migrate_info_type)(void); }; extern struct psci_operations psci_ops; extern struct smp_operations psci_smp_ops; #ifdef CONFIG_ARM_PSCI -void psci_init(void); +int psci_init(void); bool psci_smp_available(void); #else -static inline void psci_init(void) { } +static inline int psci_init(void) { return 0; } static inline bool psci_smp_available(void) { return false; } #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 8d6a089dfb76..e0adb9f1bf94 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -21,34 +21,6 @@ #define __tagtable(tag, fn) \ static const struct tagtable __tagtable_##fn __tag = { tag, fn } -/* - * Memory map description - */ -#define NR_BANKS CONFIG_ARM_NR_BANKS - -struct membank { - phys_addr_t start; - phys_addr_t size; - unsigned int highmem; -}; - -struct meminfo { - int nr_banks; - struct membank bank[NR_BANKS]; -}; - -extern struct meminfo meminfo; - -#define for_each_bank(iter,mi) \ - for (iter = 0; iter < (mi)->nr_banks; iter++) - -#define bank_pfn_start(bank) __phys_to_pfn((bank)->start) -#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size) -#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT) -#define bank_phys_start(bank) (bank)->start -#define bank_phys_end(bank) ((bank)->start + (bank)->size) -#define bank_phys_size(bank) (bank)->size - extern int arm_add_memory(u64 start, u64 size); extern void early_print(const char *str, ...); extern void dump_machine_table(void); diff --git a/arch/arm/include/asm/trusted_foundations.h b/arch/arm/include/asm/trusted_foundations.h index b5f7705abcb0..624e1d436c6c 100644 --- a/arch/arm/include/asm/trusted_foundations.h +++ b/arch/arm/include/asm/trusted_foundations.h @@ -54,7 +54,9 @@ static inline void register_trusted_foundations( */ pr_err("No support for Trusted Foundations, continuing in degraded mode.\n"); pr_err("Secondary processors as well as CPU PM will be disabled.\n"); +#if IS_ENABLED(CONFIG_SMP) setup_max_cpus = 0; +#endif cpu_idle_poll_ctrl(true); } diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 12c3a5decc60..75d95799b6e6 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -171,8 +171,9 @@ extern int __put_user_8(void *, unsigned long long); #define __put_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ + const typeof(*(p)) __user *__tmp_p = (p); \ register const typeof(*(p)) __r2 asm("r2") = (x); \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \ register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index 7704e28c3483..712b50e0a6dc 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -34,6 +34,7 @@ #define _ASM_ARM_XEN_HYPERCALL_H #include <xen/interface/xen.h> +#include <xen/interface/sched.h> long privcmd_call(unsigned call, unsigned long a1, unsigned long a2, unsigned long a3, @@ -48,6 +49,16 @@ int HYPERVISOR_memory_op(unsigned int cmd, void *arg); int HYPERVISOR_physdev_op(int cmd, void *arg); int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args); int HYPERVISOR_tmem_op(void *arg); +int HYPERVISOR_multicall(struct multicall_entry *calls, uint32_t nr); + +static inline int +HYPERVISOR_suspend(unsigned long start_info_mfn) +{ + struct sched_shutdown r = { .reason = SHUTDOWN_suspend }; + + /* start_info_mfn is unused on ARM */ + return HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); +} static inline void MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, @@ -63,9 +74,4 @@ MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req, BUG(); } -static inline int -HYPERVISOR_multicall(void *call_list, int nr_calls) -{ - BUG(); -} #endif /* _ASM_ARM_XEN_HYPERCALL_H */ diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index 1151188bcd83..50066006e6bd 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -40,6 +40,8 @@ typedef uint64_t xen_pfn_t; #define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; #define PRI_xen_ulong "llx" +typedef int64_t xen_long_t; +#define PRI_xen_long "llx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index 42b823cd2d22..032a316eb802 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -81,6 +81,15 @@ #define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR #define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) +#define IMX6SX_UART1_BASE_ADDR 0x02020000 +#define IMX6SX_UART2_BASE_ADDR 0x021e8000 +#define IMX6SX_UART3_BASE_ADDR 0x021ec000 +#define IMX6SX_UART4_BASE_ADDR 0x021f0000 +#define IMX6SX_UART5_BASE_ADDR 0x021f4000 +#define IMX6SX_UART6_BASE_ADDR 0x022a0000 +#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR +#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n) + #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT) #ifdef CONFIG_DEBUG_IMX1_UART @@ -103,6 +112,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) #elif defined(CONFIG_DEBUG_IMX6SL_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) +#elif defined(CONFIG_DEBUG_IMX6SX_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) #endif #endif /* __DEBUG_IMX_UART_H */ diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index 9d653d475903..9ef57612811d 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -15,51 +15,15 @@ * */ -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50) -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART3_PHYS 0xA9C00000 -#elif defined(CONFIG_ARCH_MSM7X30) -#define MSM_UART1_PHYS 0xACA00000 -#define MSM_UART2_PHYS 0xACB00000 -#define MSM_UART3_PHYS 0xACC00000 -#endif - -#if defined(CONFIG_DEBUG_MSM_UART1) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART2) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART3) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif - -#ifdef CONFIG_DEBUG_MSM8660_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x19C40000 -#endif - -#ifdef CONFIG_DEBUG_MSM8960_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x16440000 -#endif - -#ifdef CONFIG_DEBUG_MSM8974_UART -#define MSM_DEBUG_UART_BASE 0xFA71E000 -#define MSM_DEBUG_UART_PHYS 0xF991E000 -#endif - .macro addruart, rp, rv, tmp -#ifdef MSM_DEBUG_UART_PHYS - ldr \rp, =MSM_DEBUG_UART_PHYS - ldr \rv, =MSM_DEBUG_UART_BASE +#ifdef CONFIG_DEBUG_UART_PHYS + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT #endif .endm .macro senduart, rd, rx -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS +#ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] #else @@ -68,7 +32,7 @@ .endm .macro waituart, rd, rx -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS +#ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] tst \rd, #0x08 diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S new file mode 100644 index 000000000000..b1f54dc4888c --- /dev/null +++ b/arch/arm/include/debug/s3c24xx.S @@ -0,0 +1,46 @@ +/* arch/arm/mach-s3c2410/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2005 Simtec Electronics + * + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_s3c.h> + +#define S3C2410_UART1_OFF (0x4000) + + .macro addruart, rp, rv, tmp + ldr \rp, = CONFIG_DEBUG_UART_PHYS + ldr \rv, = CONFIG_DEBUG_UART_VIRT + .endm + + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_DEBUG_S3C2410_UART) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#endif + +/* include the reset of the code which will do the work */ + +#include <debug/samsung.S> diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S index ba12cc44b2cb..b88933849a17 100644 --- a/arch/arm/include/debug/vf.S +++ b/arch/arm/include/debug/vf.S @@ -7,9 +7,20 @@ * */ +#define VF_UART0_BASE_ADDR 0x40027000 +#define VF_UART1_BASE_ADDR 0x40028000 +#define VF_UART2_BASE_ADDR 0x40029000 +#define VF_UART3_BASE_ADDR 0x4002a000 +#define VF_UART_BASE_ADDR(n) VF_UART##n##_BASE_ADDR +#define VF_UART_BASE(n) VF_UART_BASE_ADDR(n) +#define VF_UART_PHYSICAL_BASE VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT) + +#define VF_UART_VIRTUAL_BASE 0xfe000000 + .macro addruart, rp, rv, tmp - ldr \rp, =0x40028000 @ physical - ldr \rv, =0xfe028000 @ virtual + ldr \rp, =VF_UART_PHYSICAL_BASE @ physical + and \rv, \rp, #0xffffff @ offset within 16MB section + add \rv, \rv, #VF_UART_VIRTUAL_BASE .endm .macro senduart, rd, rx diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index 0b762fafa758..bd13dedbdeff 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -20,18 +20,18 @@ #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define UART0_PHYS 0xE0000000 +#define UART0_VIRT 0xF0000000 #define UART1_PHYS 0xE0001000 -#define UART_SIZE SZ_4K -#define UART_VIRT 0xF0001000 +#define UART1_VIRT 0xF0001000 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) # define LL_UART_PADDR UART1_PHYS +# define LL_UART_VADDR UART1_VIRT #else # define LL_UART_PADDR UART0_PHYS +# define LL_UART_VADDR UART0_VIRT #endif -#define LL_UART_VADDR UART_VIRT - .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical ldr \rv, =LL_UART_VADDR @ virtual @@ -43,12 +43,14 @@ .macro waituart,rd,rx 1001: ldr \rd, [\rx, #UART_SR_OFFSET] +ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXEMPTY beq 1001b .endm .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register +ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXFULL @ bne 1002b @ wait if FIFO is full .endm diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index ef0c8785ba16..e6ebdd3471e5 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -20,6 +20,7 @@ #define __ARM_KVM_H__ #include <linux/types.h> +#include <linux/psci.h> #include <asm/ptrace.h> #define __KVM_HAVE_GUEST_DEBUG @@ -83,6 +84,7 @@ struct kvm_regs { #define KVM_VGIC_V2_CPU_SIZE 0x2000 #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ +#define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ struct kvm_vcpu_init { __u32 target; @@ -201,9 +203,9 @@ struct kvm_arch_memory_slot { #define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2) #define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3) -#define KVM_PSCI_RET_SUCCESS 0 -#define KVM_PSCI_RET_NI ((unsigned long)-1) -#define KVM_PSCI_RET_INVAL ((unsigned long)-2) -#define KVM_PSCI_RET_DENIED ((unsigned long)-3) +#define KVM_PSCI_RET_SUCCESS PSCI_RET_SUCCESS +#define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED +#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS +#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED #endif /* __ARM_KVM_H__ */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 040619c32d68..38ddd9f83d0e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o +obj-$(CONFIG_HIBERNATION) += hibernate.o obj-$(CONFIG_SMP) += smp.o ifdef CONFIG_MMU obj-$(CONFIG_SMP) += smp_tlb.o diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index 8c14de8180c0..7807ef58a2ab 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -22,6 +22,7 @@ #include <linux/fs.h> #include <linux/root_dev.h> #include <linux/screen_info.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/system_info.h> @@ -222,10 +223,10 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) } if (mdesc->fixup) - mdesc->fixup(tags, &from, &meminfo); + mdesc->fixup(tags, &from); if (tags->hdr.tag == ATAG_CORE) { - if (meminfo.nr_banks != 0) + if (memblock_phys_mem_size()) squash_mem_tags(tags); save_atags(tags); parse_tags(tags); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 16d43cd45619..17a26c17f7f5 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -545,6 +545,18 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) */ pci_bus_add_devices(bus); } + + list_for_each_entry(sys, &head, node) { + struct pci_bus *bus = sys->bus; + + /* Configure PCI Express settings */ + if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { + struct pci_bus *child; + + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } + } } #ifndef CONFIG_PCI_HOST_ITE8152 diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index c7419a585ddc..e94a157ddff1 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -27,56 +27,23 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -void __init early_init_dt_add_memory_arch(u64 base, u64 size) -{ - arm_add_memory(base, size); -} - -void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) -{ - return memblock_virt_alloc(size, align); -} - -void __init arm_dt_memblock_reserve(void) -{ - u64 *reserve_map, base, size; - - if (!initial_boot_params) - return; - /* Reserve the dtb region */ - memblock_reserve(virt_to_phys(initial_boot_params), - be32_to_cpu(initial_boot_params->totalsize)); +#ifdef CONFIG_SMP +extern struct of_cpu_method __cpu_method_of_table[]; - /* - * Process the reserve map. This will probably overlap the initrd - * and dtb locations which are already reserved, but overlaping - * doesn't hurt anything - */ - reserve_map = ((void*)initial_boot_params) + - be32_to_cpu(initial_boot_params->off_mem_rsvmap); - while (1) { - base = be64_to_cpup(reserve_map++); - size = be64_to_cpup(reserve_map++); - if (!size) - break; - memblock_reserve(base, size); - } -} +static const struct of_cpu_method __cpu_method_of_table_sentinel + __used __section(__cpu_method_of_table_end); -#ifdef CONFIG_SMP -extern struct of_cpu_method __cpu_method_of_table_begin[]; -extern struct of_cpu_method __cpu_method_of_table_end[]; static int __init set_smp_ops_by_method(struct device_node *node) { const char *method; - struct of_cpu_method *m = __cpu_method_of_table_begin; + struct of_cpu_method *m = __cpu_method_of_table; if (of_property_read_string(node, "enable-method", &method)) return 0; - for (; m < __cpu_method_of_table_end; m++) + for (; m->method; m++) if (!strcmp(m->method, method)) { smp_set_ops(m->ops); return 1; @@ -252,7 +219,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) if (!mdesc) { const char *prop; - long size; + int size; unsigned long dt_root; early_print("\nError: unrecognized/unsupported " diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 1879e8dd2acc..52a949a8077d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -344,7 +344,7 @@ ENDPROC(__pabt_svc) @ @ Enable the alignment trap while in kernel mode @ - alignment_trap r0 + alignment_trap r0, .LCcralign @ @ Clear FP to mark the first stack frame @@ -413,6 +413,11 @@ __und_usr: @ adr r9, BSYM(ret_from_exception) + @ IRQs must be enabled before attempting to read the instruction from + @ user space since that could cause a page/translation fault if the + @ page table was modified by another CPU. + enable_irq + tst r3, #PSR_T_BIT @ Thumb mode? bne __und_usr_thumb sub r4, r2, #4 @ ARM instr at LR - 4 @@ -484,7 +489,8 @@ ENDPROC(__und_usr) */ .pushsection .fixup, "ax" .align 2 -4: mov pc, r9 +4: str r4, [sp, #S_PC] @ retry current instruction + mov pc, r9 .popsection .pushsection __ex_table,"a" .long 1b, 4b @@ -517,7 +523,7 @@ ENDPROC(__und_usr) * r9 = normal "successful" return address * r10 = this threads thread_info structure * lr = unrecognised instruction return address - * IRQs disabled, FIQs enabled. + * IRQs enabled, FIQs enabled. */ @ @ Fall-through from Thumb-2 __und_usr @@ -624,7 +630,6 @@ call_fpe: #endif do_fpe: - enable_irq ldr r4, .LCfp add r10, r10, #TI_FPSTATE @ r10 = workspace ldr pc, [r4] @ Call FP module USR entry point @@ -652,8 +657,7 @@ __und_usr_fault_32: b 1f __und_usr_fault_16: mov r1, #2 -1: enable_irq - mov r0, sp +1: mov r0, sp adr lr, BSYM(ret_from_exception) b __und_fault ENDPROC(__und_usr_fault_32) @@ -1143,11 +1147,8 @@ __vectors_start: .data .globl cr_alignment - .globl cr_no_alignment cr_alignment: .space 4 -cr_no_alignment: - .space 4 #ifdef CONFIG_MULTI_IRQ_HANDLER .globl handle_arch_irq diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index a2dcafdf1bc8..7139d4a7dea7 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -365,13 +365,7 @@ ENTRY(vector_swi) str r0, [sp, #S_OLD_R0] @ Save OLD_R0 #endif zero_fp - -#ifdef CONFIG_ALIGNMENT_TRAP - ldr ip, __cr_alignment - ldr ip, [ip] - mcr p15, 0, ip, c1, c0 @ update control register -#endif - + alignment_trap ip, __cr_alignment enable_irq ct_user_exit get_thread_info tsk diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 1420725142ca..5d702f8900b1 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -37,9 +37,9 @@ #endif .endm - .macro alignment_trap, rtemp + .macro alignment_trap, rtemp, label #ifdef CONFIG_ALIGNMENT_TRAP - ldr \rtemp, .LCcralign + ldr \rtemp, \label ldr \rtemp, [\rtemp] mcr p15, 0, \rtemp, c1, c0 #endif @@ -132,6 +132,10 @@ orrne r5, V7M_xPSR_FRAMEPTRALIGN biceq r5, V7M_xPSR_FRAMEPTRALIGN + @ ensure bit 0 is cleared in the PC, otherwise behaviour is + @ unpredictable + bic r4, #1 + @ write basic exception frame stmdb r2!, {r1, r3-r5} ldmia sp, {r1, r3-r5} diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index c108ddcb9ba4..af9a8a927a4e 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -14,6 +14,7 @@ #include <linux/ftrace.h> #include <linux/uaccess.h> +#include <linux/module.h> #include <asm/cacheflush.h> #include <asm/opcodes.h> @@ -63,6 +64,18 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) } #endif +int ftrace_arch_code_modify_prepare(void) +{ + set_all_modules_text_rw(); + return 0; +} + +int ftrace_arch_code_modify_post_process(void) +{ + set_all_modules_text_ro(); + return 0; +} + static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) { return arm_gen_branch_link(pc, addr); diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index c96ecacb2021..572a38335c96 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -99,8 +99,7 @@ __mmap_switched: str r1, [r5] @ Save machine type str r2, [r6] @ Save atags pointer cmp r7, #0 - bicne r4, r0, #CR_A @ Clear 'A' bit - stmneia r7, {r0, r4} @ Save control register values + strne r0, [r7] @ Save control register values b start_kernel ENDPROC(__mmap_switched) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 591d6e4a6492..2c35f0ff2fdc 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -475,7 +475,7 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP - __INIT + __HEAD __fixup_smp: and r3, r9, #0x000f0000 @ architecture version teq r3, #0x000f0000 @ CPU ID supported? diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c new file mode 100644 index 000000000000..bb8b79648643 --- /dev/null +++ b/arch/arm/kernel/hibernate.c @@ -0,0 +1,107 @@ +/* + * Hibernation support specific for ARM + * + * Derived from work on ARM hibernation support by: + * + * Ubuntu project, hibernation support for mach-dove + * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu) + * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.) + * https://lkml.org/lkml/2010/6/18/4 + * https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html + * https://patchwork.kernel.org/patch/96442/ + * + * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/mm.h> +#include <linux/suspend.h> +#include <asm/system_misc.h> +#include <asm/idmap.h> +#include <asm/suspend.h> +#include <asm/memory.h> + +extern const void __nosave_begin, __nosave_end; + +int pfn_is_nosave(unsigned long pfn) +{ + unsigned long nosave_begin_pfn = virt_to_pfn(&__nosave_begin); + unsigned long nosave_end_pfn = virt_to_pfn(&__nosave_end - 1); + + return (pfn >= nosave_begin_pfn) && (pfn <= nosave_end_pfn); +} + +void notrace save_processor_state(void) +{ + WARN_ON(num_online_cpus() != 1); + local_fiq_disable(); +} + +void notrace restore_processor_state(void) +{ + local_fiq_enable(); +} + +/* + * Snapshot kernel memory and reset the system. + * + * swsusp_save() is executed in the suspend finisher so that the CPU + * context pointer and memory are part of the saved image, which is + * required by the resume kernel image to restart execution from + * swsusp_arch_suspend(). + * + * soft_restart is not technically needed, but is used to get success + * returned from cpu_suspend. + * + * When soft reboot completes, the hibernation snapshot is written out. + */ +static int notrace arch_save_image(unsigned long unused) +{ + int ret; + + ret = swsusp_save(); + if (ret == 0) + soft_restart(virt_to_phys(cpu_resume)); + return ret; +} + +/* + * Save the current CPU state before suspend / poweroff. + */ +int notrace swsusp_arch_suspend(void) +{ + return cpu_suspend(0, arch_save_image); +} + +/* + * Restore page contents for physical pages that were in use during loading + * hibernation image. Switch to idmap_pgd so the physical page tables + * are overwritten with the same contents. + */ +static void notrace arch_restore_image(void *unused) +{ + struct pbe *pbe; + + cpu_switch_mm(idmap_pgd, &init_mm); + for (pbe = restore_pblist; pbe; pbe = pbe->next) + copy_page(pbe->orig_address, pbe->address); + + soft_restart(virt_to_phys(cpu_resume)); +} + +static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; + +/* + * Resume from the hibernation image. + * Due to the kernel heap / data restore, stack contents change underneath + * and that would make function calls impossible; switch to a temporary + * stack within the nosave region to avoid that problem. + */ +int swsusp_arch_resume(void) +{ + extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); + call_with_stack(arch_restore_image, 0, + resume_stack + ARRAY_SIZE(resume_stack)); + return 0; +} diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 9723d17b8f38..2c4257604513 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -37,6 +37,7 @@ #include <linux/proc_fs.h> #include <linux/export.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/exception.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -115,10 +116,21 @@ EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { + int ret; + if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq) irqchip_init(); else machine_desc->init_irq(); + + if (IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_CACHE_L2X0) && + (machine_desc->l2c_aux_mask || machine_desc->l2c_aux_val)) { + outer_cache.write_sec = machine_desc->l2c_write_sec; + ret = l2x0_of_init(machine_desc->l2c_aux_val, + machine_desc->l2c_aux_mask); + if (ret) + pr_err("L2C: failed to init: %d\n", ret); + } } #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c index 346485910732..9d1cf7156895 100644 --- a/arch/arm/kernel/isa.c +++ b/arch/arm/kernel/isa.c @@ -20,7 +20,7 @@ static unsigned int isa_membase, isa_portbase, isa_portshift; -static ctl_table ctl_isa_vars[4] = { +static struct ctl_table ctl_isa_vars[4] = { { .procname = "membase", .data = &isa_membase, @@ -44,7 +44,7 @@ static ctl_table ctl_isa_vars[4] = { static struct ctl_table_header *isa_sysctl_header; -static ctl_table ctl_isa[2] = { +static struct ctl_table ctl_isa[2] = { { .procname = "isa", .mode = 0555, @@ -52,7 +52,7 @@ static ctl_table ctl_isa[2] = { }, {} }; -static ctl_table ctl_bus[2] = { +static struct ctl_table ctl_bus[2] = { { .procname = "bus", .mode = 0555, diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 2452dd1bef53..a5599cfc43cb 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -18,6 +18,7 @@ #include <asm/ptrace.h> #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#include <asm/assembler.h> #if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) #define PJ4(code...) code @@ -65,17 +66,18 @@ * r9 = ret_from_exception * lr = undefined instr exit * - * called from prefetch exception handler with interrupts disabled + * called from prefetch exception handler with interrupts enabled */ ENTRY(iwmmxt_task_enable) + inc_preempt_count r10, r3 XSC(mrc p15, 0, r2, c15, c1, 0) PJ4(mrc p15, 0, r2, c1, c0, 2) @ CP0 and CP1 accessible? XSC(tst r2, #0x3) PJ4(tst r2, #0xf) - movne pc, lr @ if so no business here + bne 4f @ if so no business here @ enable access to CP0 and CP1 XSC(orr r2, r2, #0x3) XSC(mcr p15, 0, r2, c15, c1, 0) @@ -136,7 +138,7 @@ concan_dump: wstrd wR15, [r1, #MMX_WR15] 2: teq r0, #0 @ anything to load? - moveq pc, lr + beq 3f concan_load: @@ -169,8 +171,14 @@ concan_load: @ clear CUP/MUP (only if r1 != 0) teq r1, #0 mov r2, #0 - moveq pc, lr + beq 3f tmcr wCon, r2 + +3: +#ifdef CONFIG_PREEMPT_COUNT + get_thread_info r10 +#endif +4: dec_preempt_count r10, r3 mov pc, lr /* diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index a6bc431cde70..4238bcba9d60 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -410,7 +410,7 @@ __hw_perf_event_init(struct perf_event *event) */ hwc->config_base |= (unsigned long)mapping; - if (!hwc->sample_period) { + if (!is_sampling_event(event)) { /* * For non-sampling runs, limit the sample_period to half * of the counter width. That way, the new counter value diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 51798d7854ac..af9e35e8836f 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -126,8 +126,8 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) irqs = min(pmu_device->num_resources, num_possible_cpus()); if (irqs < 1) { - pr_err("no irqs for PMUs defined\n"); - return -ENODEV; + printk_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n"); + return 0; } irq = platform_get_irq(pmu_device, 0); @@ -191,6 +191,10 @@ static void cpu_pmu_init(struct arm_pmu *cpu_pmu) /* Ensure the PMU has sane values out of reset. */ if (cpu_pmu->reset) on_each_cpu(cpu_pmu->reset, cpu_pmu, 1); + + /* If no interrupts available, set the corresponding capability flag */ + if (!platform_get_irq(cpu_pmu->plat_device, 0)) + cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; } /* @@ -221,6 +225,7 @@ static struct notifier_block cpu_pmu_hotplug_notifier = { * PMU platform driver and devicetree bindings. */ static struct of_device_id cpu_pmu_of_device_ids[] = { + {.compatible = "arm,cortex-a17-pmu", .data = armv7_a17_pmu_init}, {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, {.compatible = "arm,cortex-a12-pmu", .data = armv7_a12_pmu_init}, {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index f4ef3981ed02..2037f7205987 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1599,6 +1599,13 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) return 0; } +static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv7_a12_pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A17"; + return 0; +} + /* * Krait Performance Monitor Region Event Selection Register (PMRESRn) * @@ -2021,6 +2028,11 @@ static inline int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) return -ENODEV; } +static inline int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} + static inline int krait_pmu_init(struct arm_pmu *cpu_pmu) { return -ENODEV; diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index 46931880093d..f73891b6b730 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -17,63 +17,58 @@ #include <linux/init.h> #include <linux/of.h> +#include <linux/reboot.h> +#include <linux/pm.h> +#include <uapi/linux/psci.h> #include <asm/compiler.h> #include <asm/errno.h> #include <asm/opcodes-sec.h> #include <asm/opcodes-virt.h> #include <asm/psci.h> +#include <asm/system_misc.h> struct psci_operations psci_ops; static int (*invoke_psci_fn)(u32, u32, u32, u32); +typedef int (*psci_initcall_t)(const struct device_node *); enum psci_function { PSCI_FN_CPU_SUSPEND, PSCI_FN_CPU_ON, PSCI_FN_CPU_OFF, PSCI_FN_MIGRATE, + PSCI_FN_AFFINITY_INFO, + PSCI_FN_MIGRATE_INFO_TYPE, PSCI_FN_MAX, }; static u32 psci_function_id[PSCI_FN_MAX]; -#define PSCI_RET_SUCCESS 0 -#define PSCI_RET_EOPNOTSUPP -1 -#define PSCI_RET_EINVAL -2 -#define PSCI_RET_EPERM -3 - static int psci_to_linux_errno(int errno) { switch (errno) { case PSCI_RET_SUCCESS: return 0; - case PSCI_RET_EOPNOTSUPP: + case PSCI_RET_NOT_SUPPORTED: return -EOPNOTSUPP; - case PSCI_RET_EINVAL: + case PSCI_RET_INVALID_PARAMS: return -EINVAL; - case PSCI_RET_EPERM: + case PSCI_RET_DENIED: return -EPERM; }; return -EINVAL; } -#define PSCI_POWER_STATE_ID_MASK 0xffff -#define PSCI_POWER_STATE_ID_SHIFT 0 -#define PSCI_POWER_STATE_TYPE_MASK 0x1 -#define PSCI_POWER_STATE_TYPE_SHIFT 16 -#define PSCI_POWER_STATE_AFFL_MASK 0x3 -#define PSCI_POWER_STATE_AFFL_SHIFT 24 - static u32 psci_power_state_pack(struct psci_power_state state) { - return ((state.id & PSCI_POWER_STATE_ID_MASK) - << PSCI_POWER_STATE_ID_SHIFT) | - ((state.type & PSCI_POWER_STATE_TYPE_MASK) - << PSCI_POWER_STATE_TYPE_SHIFT) | - ((state.affinity_level & PSCI_POWER_STATE_AFFL_MASK) - << PSCI_POWER_STATE_AFFL_SHIFT); + return ((state.id << PSCI_0_2_POWER_STATE_ID_SHIFT) + & PSCI_0_2_POWER_STATE_ID_MASK) | + ((state.type << PSCI_0_2_POWER_STATE_TYPE_SHIFT) + & PSCI_0_2_POWER_STATE_TYPE_MASK) | + ((state.affinity_level << PSCI_0_2_POWER_STATE_AFFL_SHIFT) + & PSCI_0_2_POWER_STATE_AFFL_MASK); } /* @@ -110,6 +105,14 @@ static noinline int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, return function_id; } +static int psci_get_version(void) +{ + int err; + + err = invoke_psci_fn(PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0); + return err; +} + static int psci_cpu_suspend(struct psci_power_state state, unsigned long entry_point) { @@ -153,26 +156,36 @@ static int psci_migrate(unsigned long cpuid) return psci_to_linux_errno(err); } -static const struct of_device_id psci_of_match[] __initconst = { - { .compatible = "arm,psci", }, - {}, -}; +static int psci_affinity_info(unsigned long target_affinity, + unsigned long lowest_affinity_level) +{ + int err; + u32 fn; + + fn = psci_function_id[PSCI_FN_AFFINITY_INFO]; + err = invoke_psci_fn(fn, target_affinity, lowest_affinity_level, 0); + return err; +} -void __init psci_init(void) +static int psci_migrate_info_type(void) { - struct device_node *np; - const char *method; - u32 id; + int err; + u32 fn; - np = of_find_matching_node(NULL, psci_of_match); - if (!np) - return; + fn = psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE]; + err = invoke_psci_fn(fn, 0, 0, 0); + return err; +} + +static int get_set_conduit_method(struct device_node *np) +{ + const char *method; - pr_info("probing function IDs from device-tree\n"); + pr_info("probing for conduit method from DT.\n"); if (of_property_read_string(np, "method", &method)) { - pr_warning("missing \"method\" property\n"); - goto out_put_node; + pr_warn("missing \"method\" property\n"); + return -ENXIO; } if (!strcmp("hvc", method)) { @@ -180,10 +193,99 @@ void __init psci_init(void) } else if (!strcmp("smc", method)) { invoke_psci_fn = __invoke_psci_fn_smc; } else { - pr_warning("invalid \"method\" property: %s\n", method); + pr_warn("invalid \"method\" property: %s\n", method); + return -EINVAL; + } + return 0; +} + +static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd) +{ + invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0); +} + +static void psci_sys_poweroff(void) +{ + invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0); +} + +/* + * PSCI Function IDs for v0.2+ are well defined so use + * standard values. + */ +static int psci_0_2_init(struct device_node *np) +{ + int err, ver; + + err = get_set_conduit_method(np); + + if (err) + goto out_put_node; + + ver = psci_get_version(); + + if (ver == PSCI_RET_NOT_SUPPORTED) { + /* PSCI v0.2 mandates implementation of PSCI_ID_VERSION. */ + pr_err("PSCI firmware does not comply with the v0.2 spec.\n"); + err = -EOPNOTSUPP; goto out_put_node; + } else { + pr_info("PSCIv%d.%d detected in firmware.\n", + PSCI_VERSION_MAJOR(ver), + PSCI_VERSION_MINOR(ver)); + + if (PSCI_VERSION_MAJOR(ver) == 0 && + PSCI_VERSION_MINOR(ver) < 2) { + err = -EINVAL; + pr_err("Conflicting PSCI version detected.\n"); + goto out_put_node; + } } + pr_info("Using standard PSCI v0.2 function IDs\n"); + psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN_CPU_SUSPEND; + psci_ops.cpu_suspend = psci_cpu_suspend; + + psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF; + psci_ops.cpu_off = psci_cpu_off; + + psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN_CPU_ON; + psci_ops.cpu_on = psci_cpu_on; + + psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN_MIGRATE; + psci_ops.migrate = psci_migrate; + + psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN_AFFINITY_INFO; + psci_ops.affinity_info = psci_affinity_info; + + psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] = + PSCI_0_2_FN_MIGRATE_INFO_TYPE; + psci_ops.migrate_info_type = psci_migrate_info_type; + + arm_pm_restart = psci_sys_reset; + + pm_power_off = psci_sys_poweroff; + +out_put_node: + of_node_put(np); + return err; +} + +/* + * PSCI < v0.2 get PSCI Function IDs via DT. + */ +static int psci_0_1_init(struct device_node *np) +{ + u32 id; + int err; + + err = get_set_conduit_method(np); + + if (err) + goto out_put_node; + + pr_info("Using PSCI v0.1 Function IDs from DT\n"); + if (!of_property_read_u32(np, "cpu_suspend", &id)) { psci_function_id[PSCI_FN_CPU_SUSPEND] = id; psci_ops.cpu_suspend = psci_cpu_suspend; @@ -206,5 +308,25 @@ void __init psci_init(void) out_put_node: of_node_put(np); - return; + return err; +} + +static const struct of_device_id psci_of_match[] __initconst = { + { .compatible = "arm,psci", .data = psci_0_1_init}, + { .compatible = "arm,psci-0.2", .data = psci_0_2_init}, + {}, +}; + +int __init psci_init(void) +{ + struct device_node *np; + const struct of_device_id *matched_np; + psci_initcall_t init_fn; + + np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np); + if (!np) + return -ENODEV; + + init_fn = (psci_initcall_t)matched_np->data; + return init_fn(np); } diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 570a48cc3d64..28a1db4da704 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -16,6 +16,8 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/of.h> +#include <linux/delay.h> +#include <uapi/linux/psci.h> #include <asm/psci.h> #include <asm/smp_plat.h> @@ -66,6 +68,36 @@ void __ref psci_cpu_die(unsigned int cpu) /* We should never return */ panic("psci: cpu %d failed to shutdown\n", cpu); } + +int __ref psci_cpu_kill(unsigned int cpu) +{ + int err, i; + + if (!psci_ops.affinity_info) + return 1; + /* + * cpu_kill could race with cpu_die and we can + * potentially end up declaring this cpu undead + * while it is dying. So, try again a few times. + */ + + for (i = 0; i < 10; i++) { + err = psci_ops.affinity_info(cpu_logical_map(cpu), 0); + if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) { + pr_info("CPU%d killed.\n", cpu); + return 1; + } + + msleep(10); + pr_info("Retrying again to check for CPU kill\n"); + } + + pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n", + cpu, err); + /* Make platform_cpu_kill() fail. */ + return 0; +} + #endif bool __init psci_smp_available(void) @@ -78,5 +110,6 @@ struct smp_operations __initdata psci_smp_ops = { .smp_boot_secondary = psci_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = psci_cpu_die, + .cpu_kill = psci_cpu_kill, #endif }; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 50e198c1e9c8..8a16ee5d8a95 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -72,6 +72,7 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif +extern void init_default_cache_policy(unsigned long); extern void paging_init(const struct machine_desc *desc); extern void early_paging_init(const struct machine_desc *, struct proc_info_list *); @@ -590,7 +591,7 @@ static void __init setup_processor(void) pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", cpu_name, read_cpuid_id(), read_cpuid_id() & 15, - proc_arch[cpu_architecture()], cr_alignment); + proc_arch[cpu_architecture()], get_cr()); snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c", list->arch_name, ENDIANNESS); @@ -603,7 +604,9 @@ static void __init setup_processor(void) #ifndef CONFIG_ARM_THUMB elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT); #endif - +#ifdef CONFIG_MMU + init_default_cache_policy(list->__cpu_mm_mmu_flags); +#endif erratum_a15_798181_init(); feat_v6_fixup(); @@ -628,15 +631,8 @@ void __init dump_machine_table(void) int __init arm_add_memory(u64 start, u64 size) { - struct membank *bank = &meminfo.bank[meminfo.nr_banks]; u64 aligned_start; - if (meminfo.nr_banks >= NR_BANKS) { - pr_crit("NR_BANKS too low, ignoring memory at 0x%08llx\n", - (long long)start); - return -EINVAL; - } - /* * Ensure that start/size are aligned to a page boundary. * Size is appropriately rounded down, start is rounded up. @@ -677,17 +673,17 @@ int __init arm_add_memory(u64 start, u64 size) aligned_start = PHYS_OFFSET; } - bank->start = aligned_start; - bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1); + start = aligned_start; + size = size & ~(phys_addr_t)(PAGE_SIZE - 1); /* * Check whether this memory region has non-zero size or * invalid node number. */ - if (bank->size == 0) + if (size == 0) return -EINVAL; - meminfo.nr_banks++; + memblock_add(start, size); return 0; } @@ -695,6 +691,7 @@ int __init arm_add_memory(u64 start, u64 size) * Pick out the memory size. We look for mem=size@start, * where start and size are "size[KkMm]" */ + static int __init early_mem(char *p) { static int usermem __initdata = 0; @@ -709,7 +706,8 @@ static int __init early_mem(char *p) */ if (usermem == 0) { usermem = 1; - meminfo.nr_banks = 0; + memblock_remove(memblock_start_of_DRAM(), + memblock_end_of_DRAM() - memblock_start_of_DRAM()); } start = PHYS_OFFSET; @@ -854,13 +852,6 @@ static void __init reserve_crashkernel(void) static inline void reserve_crashkernel(void) {} #endif /* CONFIG_KEXEC */ -static int __init meminfo_cmp(const void *_a, const void *_b) -{ - const struct membank *a = _a, *b = _b; - long cmp = bank_pfn_start(a) - bank_pfn_start(b); - return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; -} - void __init hyp_mode_check(void) { #ifdef CONFIG_ARM_VIRT_EXT @@ -903,12 +894,10 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); - sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL); - early_paging_init(mdesc, lookup_processor_type(read_cpuid_id())); setup_dma_zone(mdesc); sanity_check_meminfo(); - arm_memblock_init(&meminfo, mdesc); + arm_memblock_init(mdesc); paging_init(mdesc); request_standard_resources(mdesc); diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index b907d9b790ab..1b880db2a033 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -127,6 +127,10 @@ ENDPROC(cpu_resume_after_mmu) .align ENTRY(cpu_resume) ARM_BE8(setend be) @ ensure we are in BE mode +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install_secondary +#endif + safe_svcmode_maskall r1 mov r1, #0 ALT_SMP(mrc p15, 0, r0, c0, c0, 5) ALT_UP_B(1f) @@ -144,7 +148,6 @@ ARM_BE8(setend be) @ ensure we are in BE mode ldr r0, [r0, #SLEEP_SAVE_SP_PHYS] ldr r0, [r0, r1, lsl #2] - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off @ load phys pgd, stack, resume fn ARM( ldmia r0!, {r1, sp, pc} ) THUMB( ldmia r0!, {r1, r2, r3} ) diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index af4e8c8a5422..f065eb05d254 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -3,6 +3,7 @@ #include <linux/stacktrace.h> #include <asm/stacktrace.h> +#include <asm/traps.h> #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) /* @@ -61,6 +62,7 @@ EXPORT_SYMBOL(walk_stackframe); #ifdef CONFIG_STACKTRACE struct stack_trace_data { struct stack_trace *trace; + unsigned long last_pc; unsigned int no_sched_functions; unsigned int skip; }; @@ -69,6 +71,7 @@ static int save_trace(struct stackframe *frame, void *d) { struct stack_trace_data *data = d; struct stack_trace *trace = data->trace; + struct pt_regs *regs; unsigned long addr = frame->pc; if (data->no_sched_functions && in_sched_functions(addr)) @@ -80,16 +83,39 @@ static int save_trace(struct stackframe *frame, void *d) trace->entries[trace->nr_entries++] = addr; + if (trace->nr_entries >= trace->max_entries) + return 1; + + /* + * in_exception_text() is designed to test if the PC is one of + * the functions which has an exception stack above it, but + * unfortunately what is in frame->pc is the return LR value, + * not the saved PC value. So, we need to track the previous + * frame PC value when doing this. + */ + addr = data->last_pc; + data->last_pc = frame->pc; + if (!in_exception_text(addr)) + return 0; + + regs = (struct pt_regs *)frame->sp; + + trace->entries[trace->nr_entries++] = regs->ARM_pc; + return trace->nr_entries >= trace->max_entries; } -void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +/* This must be noinline to so that our skip calculation works correctly */ +static noinline void __save_stack_trace(struct task_struct *tsk, + struct stack_trace *trace, unsigned int nosched) { struct stack_trace_data data; struct stackframe frame; data.trace = trace; + data.last_pc = ULONG_MAX; data.skip = trace->skip; + data.no_sched_functions = nosched; if (tsk != current) { #ifdef CONFIG_SMP @@ -102,7 +128,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) trace->entries[trace->nr_entries++] = ULONG_MAX; return; #else - data.no_sched_functions = 1; frame.fp = thread_saved_fp(tsk); frame.sp = thread_saved_sp(tsk); frame.lr = 0; /* recovered from the stack */ @@ -111,11 +136,12 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) } else { register unsigned long current_sp asm ("sp"); - data.no_sched_functions = 0; + /* We don't want this function nor the caller */ + data.skip += 2; frame.fp = (unsigned long)__builtin_frame_address(0); frame.sp = current_sp; frame.lr = (unsigned long)__builtin_return_address(0); - frame.pc = (unsigned long)save_stack_trace_tsk; + frame.pc = (unsigned long)__save_stack_trace; } walk_stackframe(&frame, save_trace, &data); @@ -123,9 +149,33 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) trace->entries[trace->nr_entries++] = ULONG_MAX; } +void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) +{ + struct stack_trace_data data; + struct stackframe frame; + + data.trace = trace; + data.skip = trace->skip; + data.no_sched_functions = 0; + + frame.fp = regs->ARM_fp; + frame.sp = regs->ARM_sp; + frame.lr = regs->ARM_lr; + frame.pc = regs->ARM_pc; + + walk_stackframe(&frame, save_trace, &data); + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; +} + +void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +{ + __save_stack_trace(tsk, trace, 1); +} + void save_stack_trace(struct stack_trace *trace) { - save_stack_trace_tsk(current, trace); + __save_stack_trace(current, trace, 0); } EXPORT_SYMBOL_GPL(save_stack_trace); #endif diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index d42a7db22236..9d853189028b 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -91,13 +91,13 @@ static void __init parse_dt_topology(void) { const struct cpu_efficiency *cpu_eff; struct device_node *cn = NULL; - unsigned long min_capacity = (unsigned long)(-1); + unsigned long min_capacity = ULONG_MAX; unsigned long max_capacity = 0; unsigned long capacity = 0; - int alloc_size, cpu = 0; + int cpu = 0; - alloc_size = nr_cpu_ids * sizeof(*__cpu_capacity); - __cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT); + __cpu_capacity = kcalloc(nr_cpu_ids, sizeof(*__cpu_capacity), + GFP_NOWAIT); for_each_possible_cpu(cpu) { const u32 *rate; diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 3c217694ebec..e67682f02cb2 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -31,7 +31,7 @@ #warning Your compiler does not have EABI support. #warning ARM unwind is known to compile only with EABI compilers. #warning Change compiler or disable ARM_UNWIND option. -#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) +#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) && !defined(__clang__) #warning Your compiler is too buggy; it is known to not compile ARM unwind support. #warning Change compiler or disable ARM_UNWIND option. #endif @@ -285,7 +285,7 @@ static int unwind_exec_pop_r4_to_rN(struct unwind_ctrl_block *ctrl, if (unwind_pop_register(ctrl, &vsp, reg)) return -URC_FAILURE; - if (insn & 0x80) + if (insn & 0x8) if (unwind_pop_register(ctrl, &vsp, 14)) return -URC_FAILURE; diff --git a/arch/arm/kernel/uprobes.c b/arch/arm/kernel/uprobes.c index f9bacee973bf..56adf9c1fde0 100644 --- a/arch/arm/kernel/uprobes.c +++ b/arch/arm/kernel/uprobes.c @@ -113,6 +113,26 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, return 0; } +void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr, + void *src, unsigned long len) +{ + void *xol_page_kaddr = kmap_atomic(page); + void *dst = xol_page_kaddr + (vaddr & ~PAGE_MASK); + + preempt_disable(); + + /* Initialize the slot */ + memcpy(dst, src, len); + + /* flush caches (dcache/icache) */ + flush_uprobe_xol_access(page, vaddr, dst, len); + + preempt_enable(); + + kunmap_atomic(xol_page_kaddr); +} + + int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) { struct uprobe_task *utask = current->utask; diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index f0e50a0f3a65..3c82b37c0f9e 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -197,6 +197,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: case KVM_CAP_ONE_REG: case KVM_CAP_ARM_PSCI: + case KVM_CAP_ARM_PSCI_0_2: r = 1; break; case KVM_CAP_COALESCED_MMIO: diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 0de91fc6de0f..4c979d466cc1 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -38,14 +38,18 @@ static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) { + int ret; + trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), kvm_vcpu_hvc_get_imm(vcpu)); - if (kvm_psci_call(vcpu)) + ret = kvm_psci_call(vcpu); + if (ret < 0) { + kvm_inject_undefined(vcpu); return 1; + } - kvm_inject_undefined(vcpu); - return 1; + return ret; } static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index 448f60e8d23c..09cf37737ee2 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -27,6 +27,36 @@ * as described in ARM document number ARM DEN 0022A. */ +#define AFFINITY_MASK(level) ~((0x1UL << ((level) * MPIDR_LEVEL_BITS)) - 1) + +static unsigned long psci_affinity_mask(unsigned long affinity_level) +{ + if (affinity_level <= 3) + return MPIDR_HWID_BITMASK & AFFINITY_MASK(affinity_level); + + return 0; +} + +static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu) +{ + /* + * NOTE: For simplicity, we make VCPU suspend emulation to be + * same-as WFI (Wait-for-interrupt) emulation. + * + * This means for KVM the wakeup events are interrupts and + * this is consistent with intended use of StateID as described + * in section 5.4.1 of PSCI v0.2 specification (ARM DEN 0022A). + * + * Further, we also treat power-down request to be same as + * stand-by request as-per section 5.4.2 clause 3 of PSCI v0.2 + * specification (ARM DEN 0022A). This means all suspend states + * for KVM will preserve the register state. + */ + kvm_vcpu_block(vcpu); + + return PSCI_RET_SUCCESS; +} + static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu) { vcpu->arch.pause = true; @@ -38,6 +68,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) struct kvm_vcpu *vcpu = NULL, *tmp; wait_queue_head_t *wq; unsigned long cpu_id; + unsigned long context_id; unsigned long mpidr; phys_addr_t target_pc; int i; @@ -58,10 +89,17 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) * Make sure the caller requested a valid CPU and that the CPU is * turned off. */ - if (!vcpu || !vcpu->arch.pause) - return KVM_PSCI_RET_INVAL; + if (!vcpu) + return PSCI_RET_INVALID_PARAMS; + if (!vcpu->arch.pause) { + if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1) + return PSCI_RET_ALREADY_ON; + else + return PSCI_RET_INVALID_PARAMS; + } target_pc = *vcpu_reg(source_vcpu, 2); + context_id = *vcpu_reg(source_vcpu, 3); kvm_reset_vcpu(vcpu); @@ -76,26 +114,160 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) kvm_vcpu_set_be(vcpu); *vcpu_pc(vcpu) = target_pc; + /* + * NOTE: We always update r0 (or x0) because for PSCI v0.1 + * the general puspose registers are undefined upon CPU_ON. + */ + *vcpu_reg(vcpu, 0) = context_id; vcpu->arch.pause = false; smp_mb(); /* Make sure the above is visible */ wq = kvm_arch_vcpu_wq(vcpu); wake_up_interruptible(wq); - return KVM_PSCI_RET_SUCCESS; + return PSCI_RET_SUCCESS; } -/** - * kvm_psci_call - handle PSCI call if r0 value is in range - * @vcpu: Pointer to the VCPU struct - * - * Handle PSCI calls from guests through traps from HVC instructions. - * The calling convention is similar to SMC calls to the secure world where - * the function number is placed in r0 and this function returns true if the - * function number specified in r0 is withing the PSCI range, and false - * otherwise. - */ -bool kvm_psci_call(struct kvm_vcpu *vcpu) +static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu) +{ + int i; + unsigned long mpidr; + unsigned long target_affinity; + unsigned long target_affinity_mask; + unsigned long lowest_affinity_level; + struct kvm *kvm = vcpu->kvm; + struct kvm_vcpu *tmp; + + target_affinity = *vcpu_reg(vcpu, 1); + lowest_affinity_level = *vcpu_reg(vcpu, 2); + + /* Determine target affinity mask */ + target_affinity_mask = psci_affinity_mask(lowest_affinity_level); + if (!target_affinity_mask) + return PSCI_RET_INVALID_PARAMS; + + /* Ignore other bits of target affinity */ + target_affinity &= target_affinity_mask; + + /* + * If one or more VCPU matching target affinity are running + * then ON else OFF + */ + kvm_for_each_vcpu(i, tmp, kvm) { + mpidr = kvm_vcpu_get_mpidr(tmp); + if (((mpidr & target_affinity_mask) == target_affinity) && + !tmp->arch.pause) { + return PSCI_0_2_AFFINITY_LEVEL_ON; + } + } + + return PSCI_0_2_AFFINITY_LEVEL_OFF; +} + +static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type) +{ + memset(&vcpu->run->system_event, 0, sizeof(vcpu->run->system_event)); + vcpu->run->system_event.type = type; + vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT; +} + +static void kvm_psci_system_off(struct kvm_vcpu *vcpu) +{ + kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_SHUTDOWN); +} + +static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) +{ + kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_RESET); +} + +int kvm_psci_version(struct kvm_vcpu *vcpu) +{ + if (test_bit(KVM_ARM_VCPU_PSCI_0_2, vcpu->arch.features)) + return KVM_ARM_PSCI_0_2; + + return KVM_ARM_PSCI_0_1; +} + +static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu) +{ + int ret = 1; + unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0); + unsigned long val; + + switch (psci_fn) { + case PSCI_0_2_FN_PSCI_VERSION: + /* + * Bits[31:16] = Major Version = 0 + * Bits[15:0] = Minor Version = 2 + */ + val = 2; + break; + case PSCI_0_2_FN_CPU_SUSPEND: + case PSCI_0_2_FN64_CPU_SUSPEND: + val = kvm_psci_vcpu_suspend(vcpu); + break; + case PSCI_0_2_FN_CPU_OFF: + kvm_psci_vcpu_off(vcpu); + val = PSCI_RET_SUCCESS; + break; + case PSCI_0_2_FN_CPU_ON: + case PSCI_0_2_FN64_CPU_ON: + val = kvm_psci_vcpu_on(vcpu); + break; + case PSCI_0_2_FN_AFFINITY_INFO: + case PSCI_0_2_FN64_AFFINITY_INFO: + val = kvm_psci_vcpu_affinity_info(vcpu); + break; + case PSCI_0_2_FN_MIGRATE: + case PSCI_0_2_FN64_MIGRATE: + val = PSCI_RET_NOT_SUPPORTED; + break; + case PSCI_0_2_FN_MIGRATE_INFO_TYPE: + /* + * Trusted OS is MP hence does not require migration + * or + * Trusted OS is not present + */ + val = PSCI_0_2_TOS_MP; + break; + case PSCI_0_2_FN_MIGRATE_INFO_UP_CPU: + case PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU: + val = PSCI_RET_NOT_SUPPORTED; + break; + case PSCI_0_2_FN_SYSTEM_OFF: + kvm_psci_system_off(vcpu); + /* + * We should'nt be going back to guest VCPU after + * receiving SYSTEM_OFF request. + * + * If user space accidently/deliberately resumes + * guest VCPU after SYSTEM_OFF request then guest + * VCPU should see internal failure from PSCI return + * value. To achieve this, we preload r0 (or x0) with + * PSCI return value INTERNAL_FAILURE. + */ + val = PSCI_RET_INTERNAL_FAILURE; + ret = 0; + break; + case PSCI_0_2_FN_SYSTEM_RESET: + kvm_psci_system_reset(vcpu); + /* + * Same reason as SYSTEM_OFF for preloading r0 (or x0) + * with PSCI return value INTERNAL_FAILURE. + */ + val = PSCI_RET_INTERNAL_FAILURE; + ret = 0; + break; + default: + return -EINVAL; + } + + *vcpu_reg(vcpu, 0) = val; + return ret; +} + +static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu) { unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0); unsigned long val; @@ -103,20 +275,45 @@ bool kvm_psci_call(struct kvm_vcpu *vcpu) switch (psci_fn) { case KVM_PSCI_FN_CPU_OFF: kvm_psci_vcpu_off(vcpu); - val = KVM_PSCI_RET_SUCCESS; + val = PSCI_RET_SUCCESS; break; case KVM_PSCI_FN_CPU_ON: val = kvm_psci_vcpu_on(vcpu); break; case KVM_PSCI_FN_CPU_SUSPEND: case KVM_PSCI_FN_MIGRATE: - val = KVM_PSCI_RET_NI; + val = PSCI_RET_NOT_SUPPORTED; break; - default: - return false; + return -EINVAL; } *vcpu_reg(vcpu, 0) = val; - return true; + return 1; +} + +/** + * kvm_psci_call - handle PSCI call if r0 value is in range + * @vcpu: Pointer to the VCPU struct + * + * Handle PSCI calls from guests through traps from HVC instructions. + * The calling convention is similar to SMC calls to the secure world + * where the function number is placed in r0. + * + * This function returns: > 0 (success), 0 (success but exit to user + * space), and < 0 (errors) + * + * Errors: + * -EINVAL: Unrecognized PSCI function + */ +int kvm_psci_call(struct kvm_vcpu *vcpu) +{ + switch (kvm_psci_version(vcpu)) { + case KVM_ARM_PSCI_0_2: + return kvm_psci_0_2_call(vcpu); + case KVM_ARM_PSCI_0_1: + return kvm_psci_0_1_call(vcpu); + default: + return -EINVAL; + }; } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b2d2cf4dc052..45b55e0f0db6 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -167,7 +167,6 @@ config SOC_AT91SAM9X5 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_UTMI select HAVE_AT91_SMD select HAVE_AT91_USB_CLK @@ -183,7 +182,6 @@ config SOC_AT91SAM9N12 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK help Select this if you are using Atmel's AT91SAM9N12 SoC. diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index f3f19f21352a..3f4bb58aea54 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -15,6 +15,7 @@ #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -25,6 +26,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -923,7 +925,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -962,7 +963,14 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, +}; + +static struct gpiod_lookup_table uart0_gpios_table = { + .dev_id = "atmel_usart", + .table = { + GPIO_LOOKUP("pioA", 21, "rts", GPIO_ACTIVE_LOW), + { }, + }, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -993,7 +1001,7 @@ static inline void configure_usart0_pins(unsigned pins) * We need to drive the pin manually. The serial driver will driver * this to high when initializing. */ - uart0_data.rts_gpio = AT91_PIN_PA21; + gpiod_add_lookup_table(&uart0_gpios_table); } } @@ -1013,7 +1021,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1065,7 +1072,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1109,7 +1115,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a0282928e9c1..ef88e0fe4e80 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -24,12 +24,11 @@ #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_adc.h> #include <mach/hardware.h> #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host @@ -820,7 +819,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -859,7 +857,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -911,7 +908,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -955,7 +951,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -999,7 +994,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); @@ -1043,7 +1037,6 @@ static struct resource uart4_resources[] = { static struct atmel_uart_data uart4_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart4_dmamask = DMA_BIT_MASK(32); @@ -1082,7 +1075,6 @@ static struct resource uart5_resources[] = { static struct atmel_uart_data uart5_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart5_dmamask = DMA_BIT_MASK(32); @@ -1308,30 +1300,23 @@ static struct platform_device at91_adc_device = { static struct at91_adc_trigger at91_adc_triggers[] = { [0] = { .name = "timer-counter-0", - .value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN, + .value = 0x1, }, [1] = { .name = "timer-counter-1", - .value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN, + .value = 0x3, }, [2] = { .name = "timer-counter-2", - .value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN, + .value = 0x5, }, [3] = { .name = "external", - .value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN, + .value = 0xd, .is_external = true, }, }; -static struct at91_adc_reg_desc at91_adc_register_g20 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = AT91_ADC_MR, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1349,9 +1334,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PA22, 0); - data->num_channels = 4; data->startup_time = 10; - data->registers = &at91_adc_register_g20; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 80e35895d28f..29baacb5c359 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -29,7 +29,7 @@ #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host @@ -881,7 +881,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -920,7 +919,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -964,7 +962,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1008,7 +1005,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 43d53d6156dd..309390d8e2f8 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -28,6 +28,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -1325,7 +1326,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1364,7 +1364,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1408,7 +1407,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1452,7 +1450,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 5e6f498db0a8..9d3d544ac19c 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -182,7 +182,7 @@ static struct clk vdec_clk = { static struct clk adc_op_clk = { .name = "adc_op_clk", .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 13200000, + .rate_hz = 300000, }; /* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index dab362c06487..391ab6bb536a 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -25,7 +25,6 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/at91_adc.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> @@ -39,6 +38,7 @@ #include "board.h" #include "generic.h" #include "clock.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -1133,58 +1133,7 @@ static void __init at91_add_device_rtc(void) {} /* -------------------------------------------------------------------- - * Touchscreen - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; - -static struct resource tsadcc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TSC, - .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9g45_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, - }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), -}; - -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) -{ - if (!data) - return; - - at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */ - at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */ - at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */ - at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9g45_tsadcc_device); -} -#else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * ADC + * ADC and touchscreen * -------------------------------------------------------------------- */ #if IS_ENABLED(CONFIG_AT91_ADC) @@ -1236,13 +1185,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g45 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = 0x08, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1268,9 +1210,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PD28, 0); - data->num_channels = 8; data->startup_time = 40; - data->registers = &at91_adc_register_g45; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; @@ -1588,7 +1528,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1627,7 +1566,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1671,7 +1609,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1715,7 +1652,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1759,7 +1695,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index f2ea7b0a02da..c8988fe5ff70 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -19,9 +19,10 @@ #include "board.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -215,6 +216,9 @@ static void __init at91sam9n12_register_clocks(void) ARRAY_SIZE(periph_clocks_lookups)); } +#else +#define at91sam9n12_register_clocks NULL +#endif /* -------------------------------------------------------------------- * AT91SAM9N12 processor initialization diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 57f12d86c0e6..a79960f57e6a 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -153,6 +153,11 @@ static struct clk ac97_clk = { .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 1000000, +}; static struct clk *periph_clocks[] __initdata = { &pioA_clk, @@ -178,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &lcdc_clk, &ac97_clk, + &adc_op_clk, // irq0 }; @@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), + CLKDEV_CON_ID("adc_clk", &tsc_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 428fc412aaf1..0b1d71a7d9bf 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -23,9 +23,11 @@ #include <mach/at91sam9_smc.h> #include <mach/hardware.h> #include <linux/platform_data/dma-atmel.h> +#include <linux/platform_data/at91_adc.h> #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -608,14 +610,13 @@ static void __init at91_add_device_tc(void) { } /* -------------------------------------------------------------------- - * Touchscreen + * ADC and Touchscreen * -------------------------------------------------------------------- */ -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; +#if IS_ENABLED(CONFIG_AT91_ADC) +static struct at91_adc_data adc_data; -static struct resource tsadcc_resources[] = { +static struct resource adc_resources[] = { [0] = { .start = AT91SAM9RL_BASE_TSC, .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1, @@ -628,36 +629,71 @@ static struct resource tsadcc_resources[] = { } }; -static struct platform_device at91sam9rl_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, +static struct platform_device at91_adc_device = { + .name = "at91sam9rl-adc", + .id = -1, + .dev = { + .platform_data = &adc_data, }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), }; -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) +static struct at91_adc_trigger at91_adc_triggers[] = { + [0] = { + .name = "external-rising", + .value = 1, + .is_external = true, + }, + [1] = { + .name = "external-falling", + .value = 2, + .is_external = true, + }, + [2] = { + .name = "external-any", + .value = 3, + .is_external = true, + }, + [3] = { + .name = "continuous", + .value = 6, + .is_external = false, + }, +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) return; - at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9rl_tsadcc_device); + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA17, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA18, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA19, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA20, 0); + if (test_bit(4, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD6, 0); + if (test_bit(5, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD7, 0); + + if (data->use_external_triggers) + at91_set_A_periph(AT91_PIN_PB15, 0); + + data->startup_time = 40; + data->trigger_number = 4; + data->trigger_list = at91_adc_triggers; + + adc_data = *data; + platform_device_register(&at91_adc_device); } #else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} +void __init at91_add_device_adc(struct at91_adc_data *data) {} #endif - /* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ @@ -957,7 +993,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -996,7 +1031,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1048,7 +1082,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1092,7 +1125,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1136,7 +1168,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 9ad781d5ee7c..028268ff3722 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -19,9 +19,10 @@ #include "board.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -313,6 +314,9 @@ static void __init at91sam9x5_register_clocks(void) clk_register(&pck0); clk_register(&pck1); } +#else +#define at91sam9x5_register_clocks NULL +#endif /* -------------------------------------------------------------------- * AT91SAM9x5 processor initialization diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 35ab632bbf68..3f6dbcc34022 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,7 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init onearm_init_early(void) { diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index f95e31cda4b3..597c649170aa 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -46,6 +46,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init afeb9260_init_early(void) diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 112e867c4abe..a30502c8d379 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -44,6 +44,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cam60_init_early(void) diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 92983050a9bd..47313d3ee037 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init carmeva_init_early(void) diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 008527efdbcf..2037f78c84e7 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -48,6 +48,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cpu9krea_init_early(void) { diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 42f1353a4baf..c094350c9314 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -43,6 +43,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static struct gpio_led cpuat91_leds[] = { { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index e5fde215225b..0e35a45cf8d4 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -42,7 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init csb337_init_early(void) { diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index fdf11061c577..18d027f529a8 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init csb637_init_early(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index f9be8161bbfa..aa457a8b22f5 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -38,6 +38,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init eb9200_init_early(void) diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index b2fcd71262ba..ede1373ccaba 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ecb_at91init_early(void) diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 77de410efc90..4e75321a8f2a 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -31,6 +31,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static void __init eco920_init_early(void) { diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 737c08563628..68f1ab6bd08f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,6 +37,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init flexibity_init_early(void) { diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index c20a870ea9c9..8b22c60bb238 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -47,6 +47,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * The FOX Board G20 hardware comes as the "Netus G20" board with diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 416bae8435ee..b729dd1271bf 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -39,6 +39,7 @@ #include "generic.h" #include "gsia18s.h" #include "stamp9g20.h" +#include "gpio.h" static void __init gsia18s_init_early(void) { diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 88e2f5d2d16d..93b1df42f639 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kafa_init_early(void) diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 0c519d9ebffc..d58d36225e08 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kb9202_init_early(void) diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 5f25fa54eb93..b48d95ec5152 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,6 +37,7 @@ #include "sam9_smc.h" #include "generic.h" #include "stamp9g20.h" +#include "gpio.h" static void __init pcontrol_g20_init_early(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ab2b2ec36c14..2c0f2d554d84 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,6 +43,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init picotux200_init_early(void) diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 8b17dadc1aba..953cea416754 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,6 +45,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index f6d7f1958c7e..f28e8b74df4b 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -31,6 +31,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init rsi_ews_init_early(void) { diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 43ee4dc43b50..d24dda67e2d3 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -43,6 +43,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index f4f8735315da..65dea12d685e 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -49,6 +49,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 473546b9408b..4637432de08f 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -53,6 +53,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 2f931915c80c..cd2726ee5add 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -52,6 +52,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index f9cd1f2c7146..e1be6e25b380 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * board revision encoding diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ef39078c8ce2..1ea61328f30d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -300,21 +301,13 @@ static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; /* - * Touchscreen - */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 300000, - .pendet_debounce = 0x0d, - .ts_sample_hold_time = 0x0a, -}; - -/* - * ADCs + * ADCs and touchscreen */ static struct at91_adc_data ek_adc_data = { .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7), .use_external_triggers = true, .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; /* @@ -485,9 +478,7 @@ static void __init ek_board_init(void) at91_add_device_isi(&isi_data, true); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); - /* Touch Screen */ - at91_add_device_tsadcc(&ek_tsadcc_data); - /* ADC */ + /* ADC and touchscreen */ at91_add_device_adc(&ek_adc_data); /* Push Buttons */ ek_add_device_buttons(); diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 604eecf6cd70..b64648b4a1fc 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -18,6 +18,7 @@ #include <linux/clk.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/platform_data/at91_adc.h> #include <video/atmel_lcdc.h> @@ -38,6 +39,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -229,12 +231,13 @@ static struct gpio_led ek_leds[] = { /* - * Touchscreen + * ADC + Touchscreen */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 1000000, - .pendet_debounce = 0x0f, - .ts_sample_hold_time = 0x03, +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5), + .use_external_triggers = true, + .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; @@ -310,8 +313,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); - /* Touch Screen Controller */ - at91_add_device_tsadcc(&ek_tsadcc_data); + /* Touch Screen Controller + ADC */ + at91_add_device_adc(&ek_adc_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* Push Buttons */ diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index f1d49e929ccb..1b870e6def0c 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -38,6 +38,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index e4a5ac17cdbc..3b575036ff96 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,6 +32,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" void __init stamp9g20_init_early(void) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index be083771df2e..46fdb0c68a68 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -50,6 +50,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init yl9200_init_early(void) diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h index 6c08b341167d..4e773b55bc2d 100644 --- a/arch/arm/mach-at91/board.h +++ b/arch/arm/mach-at91/board.h @@ -118,9 +118,6 @@ struct isi_platform_data; extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); - /* Touchscreen Controller */ -extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); - /* CAN */ extern void __init at91_add_device_can(struct at91_can_data *data); diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index a5afcf76550e..d3f05aaad8ba 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -29,6 +29,7 @@ #include <mach/at91_pio.h> #include "generic.h" +#include "gpio.h" #define MAX_NB_GPIO_PER_BANK 32 @@ -49,6 +50,7 @@ static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); +static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset); static int at91_gpiolib_direction_output(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_direction_input(struct gpio_chip *chip, @@ -60,6 +62,7 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); .chip = { \ .label = name, \ .request = at91_gpiolib_request, \ + .get_direction = at91_gpiolib_get_direction, \ .direction_input = at91_gpiolib_direction_input, \ .direction_output = at91_gpiolib_direction_output, \ .get = at91_gpiolib_get, \ @@ -799,6 +802,17 @@ static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) return 0; } +static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + u32 osr; + + osr = __raw_readl(pio + PIO_OSR); + return !(osr & mask); +} + static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset) { diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/gpio.h index 5fc23771c154..eed465ab0dd7 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/gpio.h @@ -209,14 +209,6 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); -#ifdef CONFIG_PINCTRL_AT91 -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#else -static inline void at91_pinctrl_gpio_suspend(void) {} -static inline void at91_pinctrl_gpio_resume(void) {} -#endif - #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h deleted file mode 100644 index c287307b9a3b..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_adc.h - * - * Copyright (C) SAN People - * - * Analog-to-Digital Converter (ADC) registers. - * Based on AT91SAM9260 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ADC_H -#define AT91_ADC_H - -#define AT91_ADC_CR 0x00 /* Control Register */ -#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ -#define AT91_ADC_START (1 << 1) /* Start Conversion */ - -#define AT91_ADC_MR 0x04 /* Mode Register */ -#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ -#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ -#define AT91_ADC_TRGSEL_TC0 (0 << 1) -#define AT91_ADC_TRGSEL_TC1 (1 << 1) -#define AT91_ADC_TRGSEL_TC2 (2 << 1) -#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) -#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ -#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ -#define AT91_ADC_PRESCAL_9G45 (0xff << 8) -#define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ -#define AT91_ADC_STARTUP_9G45 (0x7f << 16) -#define AT91_ADC_STARTUP_9X5 (0xf << 16) -#define AT91_ADC_STARTUP_(x) ((x) << 16) -#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ -#define AT91_ADC_SHTIM_(x) ((x) << 24) - -#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ -#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ -#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ -#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ - -#define AT91_ADC_SR 0x1C /* Status Register */ -#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ -#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ -#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ -#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ -#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ -#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ - -#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ -#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ - -#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ -#define AT91_ADC_LDATA (0x3ff) - -#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ -#define AT91_ADC_IER_PEN (1 << 29) -#define AT91_ADC_IER_NOPEN (1 << 30) -#define AT91_ADC_IER_XRDY (1 << 20) -#define AT91_ADC_IER_YRDY (1 << 21) -#define AT91_ADC_IER_PRDY (1 << 22) -#define AT91_ADC_ISR_PENS (1 << 31) - -#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ -#define AT91_ADC_DATA (0x3ff) - -#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ - -#define AT91_ADC_ACR 0x94 /* Analog Control Register */ -#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ - -#define AT91_ADC_TSMR 0xB0 -#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ -#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) -#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) -#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ -#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) -#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ -#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ -#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) -#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ -#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ -#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ - -#define AT91_ADC_TSXPOSR 0xB4 -#define AT91_ADC_TSYPOSR 0xB8 -#define AT91_ADC_TSPRESSR 0xBC - -#define AT91_ADC_TRGR_9260 AT91_ADC_MR -#define AT91_ADC_TRGR_9G45 0x08 -#define AT91_ADC_TRGR_9X5 0xC0 - -/* Trigger Register bit field */ -#define AT91_ADC_TRGR_TRGPER (0xffff << 16) -#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) -#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) -#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) - -#endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index f17aa3150019..56338245653a 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -104,5 +104,20 @@ /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ +/* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif +#endif #endif diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 3e22978b5547..77c4d8fd03fd 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include "board.h" +#include "gpio.h" /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 8bda1cefdf96..e95554532987 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -32,6 +32,7 @@ #include "at91_aic.h" #include "generic.h" #include "pm.h" +#include "gpio.h" /* * Show the reason for the previous system reset. diff --git a/arch/arm/mach-at91/sysirq_mask.c b/arch/arm/mach-at91/sysirq_mask.c index 2ba694f9626b..f8bc3511a8c8 100644 --- a/arch/arm/mach-at91/sysirq_mask.c +++ b/arch/arm/mach-at91/sysirq_mask.c @@ -25,24 +25,28 @@ #include "generic.h" -#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ -#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ +#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ +#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ +#define AT91_RTC_IRQ_MASK 0x1f /* Available IRQs mask */ void __init at91_sysirq_mask_rtc(u32 rtc_base) { void __iomem *base; - u32 mask; base = ioremap(rtc_base, 64); if (!base) return; - mask = readl_relaxed(base + AT91_RTC_IMR); - if (mask) { - pr_info("AT91: Disabling rtc irq\n"); - writel_relaxed(mask, base + AT91_RTC_IDR); - (void)readl_relaxed(base + AT91_RTC_IMR); /* flush */ - } + /* + * sam9x5 SoCs have the following errata: + * "RTC: Interrupt Mask Register cannot be used + * Interrupt Mask Register read always returns 0." + * + * Hence we're not relying on IMR values to disable + * interrupts. + */ + writel_relaxed(AT91_RTC_IRQ_MASK, base + AT91_RTC_IDR); + (void)readl_relaxed(base + AT91_RTC_IMR); /* flush */ iounmap(base); } diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig new file mode 100644 index 000000000000..8be7e0ae1922 --- /dev/null +++ b/arch/arm/mach-axxia/Kconfig @@ -0,0 +1,16 @@ +config ARCH_AXXIA + bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE) + select ARCH_DMA_ADDR_T_64BIT + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select HAVE_ARM_ARCH_TIMER + select MFD_SYSCON + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI + select ZONE_DMA + help + This enables support for the LSI Axxia devices. + + The LSI Axxia platforms require a Flattened Device Tree to be passed + to the kernel. diff --git a/arch/arm/mach-axxia/Makefile b/arch/arm/mach-axxia/Makefile new file mode 100644 index 000000000000..ec4f68b460c6 --- /dev/null +++ b/arch/arm/mach-axxia/Makefile @@ -0,0 +1,2 @@ +obj-y += axxia.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c new file mode 100644 index 000000000000..19e5a1d95397 --- /dev/null +++ b/arch/arm/mach-axxia/axxia.c @@ -0,0 +1,28 @@ +/* + * Support for the LSI Axxia SoC devices based on ARM cores. + * + * Copyright (C) 2012 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/init.h> +#include <asm/mach/arch.h> + +static const char *axxia_dt_match[] __initconst = { + "lsi,axm5516", + "lsi,axm5516-sim", + "lsi,axm5516-emu", + NULL +}; + +DT_MACHINE_START(AXXIA_DT, "LSI Axxia AXM55XX") + .dt_compat = axxia_dt_match, +MACHINE_END diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c new file mode 100644 index 000000000000..959d4df3d2b6 --- /dev/null +++ b/arch/arm/mach-axxia/platsmp.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-axxia/platsmp.c + * + * Copyright (C) 2012 LSI Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/smp.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <asm/cacheflush.h> + +/* Syscon register offsets for releasing cores from reset */ +#define SC_CRIT_WRITE_KEY 0x1000 +#define SC_RST_CPU_HOLD 0x1010 + +/* + * Write the kernel entry point for secondary CPUs to the specified address + */ +static void write_release_addr(u32 release_phys) +{ + u32 *virt = (u32 *) phys_to_virt(release_phys); + writel_relaxed(virt_to_phys(secondary_startup), virt); + /* Make sure this store is visible to other CPUs */ + smp_wmb(); + __cpuc_flush_dcache_area(virt, sizeof(u32)); +} + +static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + struct device_node *syscon_np; + void __iomem *syscon; + u32 tmp; + + syscon_np = of_find_compatible_node(NULL, NULL, "lsi,axxia-syscon"); + if (!syscon_np) + return -ENOENT; + + syscon = of_iomap(syscon_np, 0); + if (!syscon) + return -ENOMEM; + + tmp = readl(syscon + SC_RST_CPU_HOLD); + writel(0xab, syscon + SC_CRIT_WRITE_KEY); + tmp &= ~(1 << cpu); + writel(tmp, syscon + SC_RST_CPU_HOLD); + + return 0; +} + +static void __init axxia_smp_prepare_cpus(unsigned int max_cpus) +{ + int cpu_count = 0; + int cpu; + + /* + * Initialise the present map, which describes the set of CPUs actually + * populated at the present time. + */ + for_each_possible_cpu(cpu) { + struct device_node *np; + u32 release_phys; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + continue; + if (of_property_read_u32(np, "cpu-release-addr", &release_phys)) + continue; + + if (cpu_count < max_cpus) { + set_cpu_present(cpu, true); + cpu_count++; + } + + if (release_phys != 0) + write_release_addr(release_phys); + } +} + +static struct smp_operations axxia_smp_ops __initdata = { + .smp_prepare_cpus = axxia_smp_prepare_cpus, + .smp_boot_secondary = axxia_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(axxia_smp, "lsi,syscon-release", &axxia_smp_ops); diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 49c914cd9c7a..9bc6db1c1348 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,31 +1,58 @@ config ARCH_BCM - bool "Broadcom SoC Support" - depends on ARCH_MULTIPLATFORM + bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 help - This enables support for Broadcom ARM based SoC - chips - -if ARCH_BCM + This enables support for Broadcom ARM based SoC chips menu "Broadcom SoC Selection" + depends on ARCH_BCM config ARCH_BCM_MOBILE - bool "Broadcom Mobile SoC" if ARCH_MULTI_V7 - depends on MMU + bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 select ARM_GIC select GPIO_BCM_KONA select TICK_ONESHOT - select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER select PINCTRL help This enables support for systems based on Broadcom mobile SoCs. - It currently supports the 'BCM281XX' family, which includes - BCM11130, BCM11140, BCM11351, BCM28145 and - BCM28155 variants. + +if ARCH_BCM_MOBILE + +menu "Broadcom Mobile SoC Selection" + +config ARCH_BCM_281XX + bool "Broadcom BCM281XX SoC family" + default y + help + Enable support for the the BCM281XX family, which includes + BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 + variants. + +config ARCH_BCM_21664 + bool "Broadcom BCM21664 SoC family" + default y + help + Enable support for the the BCM21664 family, which includes + BCM21663 and BCM21664 variants. + +config ARCH_BCM_MOBILE_L2_CACHE + bool "Broadcom mobile SoC level 2 cache support" + depends on (ARCH_BCM_281XX || ARCH_BCM_21664) + default y + select CACHE_L2X0 + select ARCH_BCM_MOBILE_SMC + +config ARCH_BCM_MOBILE_SMC + bool + depends on ARCH_BCM_281XX || ARCH_BCM_21664 + +endmenu + +endif config ARCH_BCM2835 bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 @@ -33,10 +60,7 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 - select CLKDEV_LOOKUP select CLKSRC_OF - select CPU_V6 - select GENERIC_CLOCKEVENTS select PINCTRL select PINCTRL_BCM2835 help @@ -45,17 +69,12 @@ config ARCH_BCM2835 config ARCH_BCM_5301X bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7 - depends on MMU select ARM_GIC select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select COMMON_CLK - select GENERIC_CLOCKEVENTS select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK - select MIGHT_HAVE_PCI help Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. @@ -70,5 +89,3 @@ config ARCH_BCM_5301X network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx endmenu - -endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index a326b28c4406..731292114975 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -10,10 +10,23 @@ # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o board_bcm21664.o \ - bcm_kona_smc.o bcm_kona_smc_asm.o kona.o +# BCM281XX +obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o + +# BCM21664 +obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o + +# BCM281XX and BCM21664 L2 cache control +obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o + +# Support for secure monitor traps +obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o +ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec) +CFLAGS_bcm_kona_smc.o += -Wa,-march=armv7-a+sec -DREQUIRES_SEC +endif + +# BCM2835 obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) +# BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index edff69761e04..e9bcbdbce555 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -43,19 +43,14 @@ static void __init bcm5301x_init_early(void) "imprecise external abort"); } -static void __init bcm5301x_dt_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char __initconst *bcm5301x_dt_compat[] = { "brcm,bcm4708", NULL, }; DT_MACHINE_START(BCM5301X, "BCM5301X") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_early = bcm5301x_init_early, - .init_machine = bcm5301x_dt_init, .dt_compat = bcm5301x_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 5e31e918f325..a55a7ecf146a 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -21,11 +21,8 @@ #include "bcm_kona_smc.h" -struct secure_bridge_data { - void __iomem *bounce; /* virtual address */ - u32 __iomem buffer_addr; /* physical address */ - int initialized; -} bridge_data; +static u32 bcm_smc_buffer_phys; /* physical address */ +static void __iomem *bcm_smc_buffer; /* virtual address */ struct bcm_kona_smc_data { unsigned service_id; @@ -33,6 +30,7 @@ struct bcm_kona_smc_data { unsigned arg1; unsigned arg2; unsigned arg3; + unsigned result; }; static const struct of_device_id bcm_kona_smc_ids[] __initconst = { @@ -41,59 +39,125 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = { {}, }; -/* Map in the bounce area */ +/* Map in the args buffer area */ int __init bcm_kona_smc_init(void) { struct device_node *node; + const __be32 *prop_val; + u64 prop_size = 0; + unsigned long buffer_size; + u32 buffer_phys; /* Read buffer addr and size from the device tree node */ node = of_find_matching_node(NULL, bcm_kona_smc_ids); if (!node) return -ENODEV; - /* Don't care about size or flags of the DT node */ - bridge_data.buffer_addr = - be32_to_cpu(*of_get_address(node, 0, NULL, NULL)); - BUG_ON(!bridge_data.buffer_addr); + prop_val = of_get_address(node, 0, &prop_size, NULL); + if (!prop_val) + return -EINVAL; - bridge_data.bounce = of_iomap(node, 0); - BUG_ON(!bridge_data.bounce); + /* We assume space for four 32-bit arguments */ + if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX) + return -EINVAL; + buffer_size = (unsigned long)prop_size; - bridge_data.initialized = 1; + buffer_phys = be32_to_cpup(prop_val); + if (!buffer_phys) + return -EINVAL; + + bcm_smc_buffer = ioremap(buffer_phys, buffer_size); + if (!bcm_smc_buffer) + return -ENOMEM; + bcm_smc_buffer_phys = buffer_phys; pr_info("Kona Secure API initialized\n"); return 0; } +/* + * int bcm_kona_do_smc(u32 service_id, u32 buffer_addr) + * + * Only core 0 can run the secure monitor code. If an "smc" request + * is initiated on a different core it must be redirected to core 0 + * for execution. We rely on the caller to handle this. + * + * Each "smc" request supplies a service id and the address of a + * buffer containing parameters related to the service to be + * performed. A flags value defines the behavior of the level 2 + * cache and interrupt handling while the secure monitor executes. + * + * Parameters to the "smc" request are passed in r4-r6 as follows: + * r4 service id + * r5 flags (SEC_ROM_*) + * r6 physical address of buffer with other parameters + * + * Execution of an "smc" request produces two distinct results. + * + * First, the secure monitor call itself (regardless of the specific + * service request) can succeed, or can produce an error. When an + * "smc" request completes this value is found in r12; it should + * always be SEC_EXIT_NORMAL. + * + * In addition, the particular service performed produces a result. + * The values that should be expected depend on the service. We + * therefore return this value to the caller, so it can handle the + * request result appropriately. This result value is found in r0 + * when the "smc" request completes. + */ +static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys) +{ + register u32 ip asm("ip"); /* Also called r12 */ + register u32 r0 asm("r0"); + register u32 r4 asm("r4"); + register u32 r5 asm("r5"); + register u32 r6 asm("r6"); + + r4 = service_id; + r5 = 0x3; /* Keep IRQ and FIQ off in SM */ + r6 = buffer_phys; + + asm volatile ( + /* Make sure we got the registers we want */ + __asmeq("%0", "ip") + __asmeq("%1", "r0") + __asmeq("%2", "r4") + __asmeq("%3", "r5") + __asmeq("%4", "r6") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + " smc #0\n" + : "=r" (ip), "=r" (r0) + : "r" (r4), "r" (r5), "r" (r6) + : "r1", "r2", "r3", "r7", "lr"); + + BUG_ON(ip != SEC_EXIT_NORMAL); + + return r0; +} + /* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */ static void __bcm_kona_smc(void *info) { struct bcm_kona_smc_data *data = info; - u32 *args = bridge_data.bounce; - int rc = 0; + u32 *args = bcm_smc_buffer; - /* Must run on CPU 0 */ BUG_ON(smp_processor_id() != 0); + BUG_ON(!args); - /* Check map in the bounce area */ - BUG_ON(!bridge_data.initialized); - - /* Copy one 32 bit word into the bounce area */ - args[0] = data->arg0; - args[1] = data->arg1; - args[2] = data->arg2; - args[3] = data->arg3; + /* Copy the four 32 bit argument values into the bounce area */ + writel_relaxed(data->arg0, args++); + writel_relaxed(data->arg1, args++); + writel_relaxed(data->arg2, args++); + writel(data->arg3, args); /* Flush caches for input data passed to Secure Monitor */ - if (data->service_id != SSAPI_BRCM_START_VC_CORE) - flush_cache_all(); - - /* Trap into Secure Monitor */ - rc = bcm_kona_smc_asm(data->service_id, bridge_data.buffer_addr); + flush_cache_all(); - if (rc != SEC_ROM_RET_OK) - pr_err("Secure Monitor call failed (0x%x)!\n", rc); + /* Trap into Secure Monitor and record the request result */ + data->result = bcm_kona_do_smc(data->service_id, bcm_smc_buffer_phys); } unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1, @@ -106,17 +170,13 @@ unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1, data.arg1 = arg1; data.arg2 = arg2; data.arg3 = arg3; + data.result = 0; /* * Due to a limitation of the secure monitor, we must use the SMP * infrastructure to forward all secure monitor calls to Core 0. */ - if (get_cpu() != 0) - smp_call_function_single(0, __bcm_kona_smc, (void *)&data, 1); - else - __bcm_kona_smc(&data); + smp_call_function_single(0, __bcm_kona_smc, &data, 1); - put_cpu(); - - return 0; + return data.result; } diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h index d098a7e76744..2e29ec67e414 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.h +++ b/arch/arm/mach-bcm/bcm_kona_smc.h @@ -15,55 +15,12 @@ #define BCM_KONA_SMC_H #include <linux/types.h> -#define FLAGS (SEC_ROM_ICACHE_ENABLE_MASK | SEC_ROM_DCACHE_ENABLE_MASK | \ - SEC_ROM_IRQ_ENABLE_MASK | SEC_ROM_FIQ_ENABLE_MASK) -/*! - * Definitions for IRQ & FIQ Mask for ARM - */ - -#define FIQ_IRQ_MASK 0xC0 -#define FIQ_MASK 0x40 -#define IRQ_MASK 0x80 - -/*! - * Secure Mode FLAGs - */ - -/* When set, enables ICache within the secure mode */ -#define SEC_ROM_ICACHE_ENABLE_MASK 0x00000001 - -/* When set, enables DCache within the secure mode */ -#define SEC_ROM_DCACHE_ENABLE_MASK 0x00000002 - -/* When set, enables IRQ within the secure mode */ -#define SEC_ROM_IRQ_ENABLE_MASK 0x00000004 - -/* When set, enables FIQ within the secure mode */ -#define SEC_ROM_FIQ_ENABLE_MASK 0x00000008 - -/* When set, enables Unified L2 cache within the secure mode */ -#define SEC_ROM_UL2_CACHE_ENABLE_MASK 0x00000010 - -/* Broadcom Secure Service API Service IDs */ -#define SSAPI_DORMANT_ENTRY_SERV 0x01000000 -#define SSAPI_PUBLIC_OTP_SERV 0x01000001 -#define SSAPI_ENABLE_L2_CACHE 0x01000002 -#define SSAPI_DISABLE_L2_CACHE 0x01000003 -#define SSAPI_WRITE_SCU_STATUS 0x01000004 -#define SSAPI_WRITE_PWR_GATE 0x01000005 - -/* Broadcom Secure Service API Return Codes */ +/* Broadcom Secure Service API service IDs, return codes, and exit codes */ +#define SSAPI_ENABLE_L2_CACHE 0x01000002 #define SEC_ROM_RET_OK 0x00000001 -#define SEC_ROM_RET_FAIL 0x00000009 - -#define SSAPI_RET_FROM_INT_SERV 0x4 #define SEC_EXIT_NORMAL 0x1 -#define SSAPI_ROW_AES 0x0E000006 -#define SSAPI_BRCM_START_VC_CORE 0x0E000008 - -#ifndef __ASSEMBLY__ extern int __init bcm_kona_smc_init(void); extern unsigned bcm_kona_smc(unsigned service_id, @@ -72,9 +29,4 @@ extern unsigned bcm_kona_smc(unsigned service_id, unsigned arg2, unsigned arg3); -extern int bcm_kona_smc_asm(u32 service_id, - u32 buffer_addr); - -#endif /* __ASSEMBLY__ */ - #endif /* BCM_KONA_SMC_H */ diff --git a/arch/arm/mach-bcm/bcm_kona_smc_asm.S b/arch/arm/mach-bcm/bcm_kona_smc_asm.S deleted file mode 100644 index a1608480d60d..000000000000 --- a/arch/arm/mach-bcm/bcm_kona_smc_asm.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2013 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/linkage.h> -#include "bcm_kona_smc.h" - -/* - * int bcm_kona_smc_asm(u32 service_id, u32 buffer_addr) - */ - -ENTRY(bcm_kona_smc_asm) - stmfd sp!, {r4-r12, lr} - mov r4, r0 @ service_id - mov r5, #3 @ Keep IRQ and FIQ off in SM - /* - * Since interrupts are disabled in the open mode, we must keep - * interrupts disabled in secure mode by setting R5=0x3. If interrupts - * are enabled in open mode, we can set R5=0x0 to allow interrupts in - * secure mode. If we did this, the secure monitor would return back - * control to the open mode to handle the interrupt prior to completing - * the secure service. If this happened, R12 would not be - * SEC_EXIT_NORMAL and we would need to call SMC again after resetting - * R5 (it gets clobbered by the secure monitor) and setting R4 to - * SSAPI_RET_FROM_INT_SERV to indicate that we want the secure monitor - * to finish up the previous uncompleted secure service. - */ - mov r6, r1 @ buffer_addr - smc #0 - /* Check r12 for SEC_EXIT_NORMAL here if interrupts are enabled */ - ldmfd sp!, {r4-r12, pc} -ENDPROC(bcm_kona_smc_asm) diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c index acc1573fd005..f0521cc0640d 100644 --- a/arch/arm/mach-bcm/board_bcm21664.c +++ b/arch/arm/mach-bcm/board_bcm21664.c @@ -11,14 +11,13 @@ * GNU General Public License for more details. */ -#include <linux/clocksource.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/io.h> #include <asm/mach/arch.h> -#include "bcm_kona_smc.h" -#include "kona.h" +#include "kona_l2_cache.h" #define RSTMGR_DT_STRING "brcm,bcm21664-resetmgr" diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 6be54c10f8cb..1ac59fc0cb15 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -17,7 +17,7 @@ #include <asm/mach/arch.h> -#include "kona.h" +#include "kona_l2_cache.h" #define SECWDOG_OFFSET 0x00000000 #define SECWDOG_RESERVED_MASK 0xe2000000 diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona_l2_cache.c index 768bc2837bf5..b31970377c20 100644 --- a/arch/arm/mach-bcm/kona.c +++ b/arch/arm/mach-bcm/kona_l2_cache.c @@ -11,19 +11,18 @@ * GNU General Public License for more details. */ -#include <linux/of_platform.h> + +#include <linux/init.h> +#include <linux/printk.h> #include <asm/hardware/cache-l2x0.h> #include "bcm_kona_smc.h" -#include "kona.h" void __init kona_l2_cache_init(void) { + unsigned int result; int ret; - if (!IS_ENABLED(CONFIG_CACHE_L2X0)) - return; - ret = bcm_kona_smc_init(); if (ret) { pr_info("Secure API not available (%d). Skipping L2 init.\n", @@ -31,7 +30,12 @@ void __init kona_l2_cache_init(void) return; } - bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); + result = bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); + if (result != SEC_ROM_RET_OK) { + pr_err("Secure Monitor call failed (%u)! Skipping L2 init.\n", + result); + return; + } /* * The aux_val and aux_mask have no effect since L2 cache is already diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona_l2_cache.h index 3a7a017c29cd..46f84a95ab1c 100644 --- a/arch/arm/mach-bcm/kona.h +++ b/arch/arm/mach-bcm/kona_l2_cache.h @@ -11,4 +11,8 @@ * GNU General Public License for more details. */ -void __init kona_l2_cache_init(void); +#ifdef CONFIG_ARCH_BCM_MOBILE_L2_CACHE +void kona_l2_cache_init(void); +#else +#define kona_l2_cache_init() ((void)0) +#endif diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index b0cb0722acd2..101e0f356730 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,9 +1,11 @@ config ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select ARM_GIC select GENERIC_IRQ_CHIP select DW_APB_ICTL select DW_APB_TIMER_OF + select PINCTRL if ARCH_BERLIN @@ -14,11 +16,19 @@ config MACH_BERLIN_BG2 select CACHE_L2X0 select CPU_PJ4B select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2 config MACH_BERLIN_BG2CD bool "Marvell Armada 1500-mini (BG2CD)" select CACHE_L2X0 select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2CD + +config MACH_BERLIN_BG2Q + bool "Marvell Armada 1500 Pro (BG2-Q)" + select CACHE_L2X0 + select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2Q endmenu diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c index 025bcb5473eb..ac181c6797ee 100644 --- a/arch/arm/mach-berlin/berlin.c +++ b/arch/arm/mach-berlin/berlin.c @@ -18,16 +18,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> -static void __init berlin_init_machine(void) -{ - /* - * with DT probing for L2CCs, berlin_init_machine can be removed. - * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc - */ - l2x0_of_init(0x70c00000, 0xfeffffff); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * const berlin_dt_compat[] = { "marvell,berlin", NULL, @@ -35,5 +25,10 @@ static const char * const berlin_dt_compat[] = { DT_MACHINE_START(BERLIN_DT, "Marvell Berlin") .dt_compat = berlin_dt_compat, - .init_machine = berlin_init_machine, + /* + * with DT probing for L2CCs, berlin_init_machine can be removed. + * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc + */ + .l2c_aux_val = 0x30c00000, + .l2c_aux_mask = 0xfeffffff, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index 221b9de32dd6..94a7add88a3f 100644 --- a/arch/arm/mach-clps711x/board-clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -18,6 +18,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/string.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -26,11 +27,9 @@ #include "common.h" static void __init -fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_clep7312(struct tag *tags, char **cmdline) { - mi->nr_banks=1; - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = 0x01000000; + memblock_add(0xc0000000, 0x01000000); } MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c index 077609841f14..f9828f89972a 100644 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -16,6 +16,7 @@ #include <linux/interrupt.h> #include <linux/backlight.h> #include <linux/platform_device.h> +#include <linux/memblock.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> @@ -133,7 +134,7 @@ static void __init edb7211_reserve(void) } static void __init -fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_edb7211(struct tag *tags, char **cmdline) { /* * Bank start addresses are not present in the information @@ -143,11 +144,8 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) * Banks sizes _are_ present in the param block, but we're * not using that information yet. */ - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = SZ_8M; - mi->bank[1].start = 0xc1000000; - mi->bank[1].size = SZ_8M; - mi->nr_banks = 2; + memblock_add(0xc0000000, SZ_8M); + memblock_add(0xc1000000, SZ_8M); } static void __init edb7211_init(void) diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c index 67b733744ed7..0cf0e51e6546 100644 --- a/arch/arm/mach-clps711x/board-p720t.c +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -295,7 +295,7 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = { }; static void __init -fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) +fixup_p720t(struct tag *tag, char **cmdline) { /* * Our bootloader doesn't setup any tags (yet). diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index dce8decd5d46..66838f42037f 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,7 +1,6 @@ config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 2ae28a69e3e5..f85449a6accd 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -272,9 +272,9 @@ void __init cns3xxx_l2x0_init(void) * * 1 cycle of latency for setup, read and write accesses */ - val = readl(base + L2X0_TAG_LATENCY_CTRL); + val = readl(base + L310_TAG_LATENCY_CTRL); val &= 0xfffff888; - writel(val, base + L2X0_TAG_LATENCY_CTRL); + writel(val, base + L310_TAG_LATENCY_CTRL); /* * Data RAM Control register @@ -285,12 +285,12 @@ void __init cns3xxx_l2x0_init(void) * * 1 cycle of latency for setup, read and write accesses */ - val = readl(base + L2X0_DATA_LATENCY_CTRL); + val = readl(base + L310_DATA_LATENCY_CTRL); val &= 0xfffff888; - writel(val, base + L2X0_DATA_LATENCY_CTRL); + writel(val, base + L310_DATA_LATENCY_CTRL); /* 32 KiB, 8-way, parity disable */ - l2x0_init(base, 0x00540000, 0xfe000fff); + l2x0_init(base, 0x00500000, 0xfe0f0fff); } #endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index ecdc7d44fa70..06d63d5651f3 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -350,11 +350,7 @@ static struct davinci_mmc_config dm355evm_mmc_config = { * you have proper Mini-B or Mini-A cables (or Mini-A adapters) * the ID pin won't need any help. */ -#ifdef CONFIG_USB_MUSB_PERIPHERAL -#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ -#else #define USB_ID_VALUE 1 /* ID pulled low */ -#endif static struct spi_eeprom at25640a = { .byte_len = SZ_64K / 8, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 43bacbf15314..680a7a2d9102 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -208,11 +208,7 @@ static struct davinci_mmc_config dm355leopard_mmc_config = { * you have proper Mini-B or Mini-A cables (or Mini-A adapters) * the ID pin won't need any help. */ -#ifdef CONFIG_USB_MUSB_PERIPHERAL -#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ -#else #define USB_ID_VALUE 1 /* ID pulled low */ -#endif static struct spi_eeprom at25640a = { .byte_len = SZ_64K / 8, diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 85399c98f84a..45ce065e7170 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1092,20 +1092,21 @@ int da850_register_cpufreq(char *async_clk) static int da850_round_armrate(struct clk *clk, unsigned long rate) { - int i, ret = 0, diff; + int ret = 0, diff; unsigned int best = (unsigned int) -1; struct cpufreq_frequency_table *table = cpufreq_info.freq_table; + struct cpufreq_frequency_table *pos; rate /= 1000; /* convert to kHz */ - for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) { - diff = table[i].frequency - rate; + cpufreq_for_each_entry(pos, table) { + diff = pos->frequency - rate; if (diff < 0) diff = -diff; if (diff < best) { best = diff; - ret = table[i].frequency; + ret = pos->frequency; } } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 56ea41d5f849..b85b781b05fd 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -134,13 +134,6 @@ struct platform_device da8xx_serial_device[] = { } }; -static s8 da8xx_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1} -}; - static s8 da8xx_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -148,12 +141,6 @@ static s8 da8xx_queue_priority_mapping[][2] = { {-1, -1} }; -static s8 da850_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {-1, -1} -}; - static s8 da850_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -161,12 +148,6 @@ static s8 da850_queue_priority_mapping[][2] = { }; static struct edma_soc_info da830_edma_cc0_info = { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }; @@ -177,22 +158,10 @@ static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { static struct edma_soc_info da850_edma_cc_info[] = { { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }, { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 1, - .n_cc = 1, - .queue_tc_mapping = da850_queue_tc_mapping, .queue_priority_mapping = da850_queue_priority_mapping, .default_queue = EVENTQ_0, }, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 07381d8cea62..2f3ed3a58d57 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -569,14 +569,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ static s8 -queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1}, -}; - -static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -585,12 +577,6 @@ queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 08a61b938333..0ae8114f5cc9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -853,16 +853,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { /* Four Transfer Controllers on DM365 */ static s8 -dm365_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {2, 2}, - {3, 3}, - {-1, -1}, -}; - -static s8 dm365_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 7}, @@ -873,12 +863,6 @@ dm365_queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 256, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm365_queue_tc_mapping, .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 5debffba4b24..dc52657909c4 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -499,14 +499,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ static s8 -queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1}, -}; - -static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -515,12 +507,6 @@ queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 332d00d24dc2..6c3bbea7d77d 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -533,16 +533,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /* Four Transfer Controllers on DM646x */ static s8 -dm646x_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {2, 2}, - {3, 3}, - {-1, -1}, -}; - -static s8 dm646x_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 4}, @@ -553,12 +543,6 @@ dm646x_queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 6, /* 0-1, 4-7 */ - .n_slot = 512, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm646x_queue_tc_mapping, .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index bc4344aa1009..4a5a7aedcb76 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -108,6 +108,38 @@ static int __initdata gpio2_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *dove_irq_base = IRQ_VIRT_BASE; + +static asmlinkage void +__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init dove_init_irq(void) { int i; @@ -115,6 +147,10 @@ void __init dove_init_irq(void) orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(dove_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-71. */ diff --git a/arch/arm/mach-ep93xx/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S index 0ec9bb48fab9..e96923a3017b 100644 --- a/arch/arm/mach-ep93xx/crunch-bits.S +++ b/arch/arm/mach-ep93xx/crunch-bits.S @@ -16,6 +16,7 @@ #include <asm/ptrace.h> #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#include <asm/assembler.h> #include <mach/ep93xx-regs.h> /* @@ -62,14 +63,16 @@ * r9 = ret_from_exception * lr = undefined instr exit * - * called from prefetch exception handler with interrupts disabled + * called from prefetch exception handler with interrupts enabled */ ENTRY(crunch_task_enable) + inc_preempt_count r10, r3 + ldr r8, =(EP93XX_APB_VIRT_BASE + 0x00130000) @ syscon addr ldr r1, [r8, #0x80] tst r1, #0x00800000 @ access to crunch enabled? - movne pc, lr @ if so no business here + bne 2f @ if so no business here mov r3, #0xaa @ unlock syscon swlock str r3, [r8, #0xc0] orr r1, r1, #0x00800000 @ enable access to crunch @@ -142,7 +145,7 @@ crunch_save: teq r0, #0 @ anything to load? cfldr64eq mvdx0, [r1, #CRUNCH_MVDX0] @ mvdx0 was clobbered - moveq pc, lr + beq 1f crunch_load: cfldr64 mvdx0, [r0, #CRUNCH_DSPSC] @ load status word @@ -190,6 +193,11 @@ crunch_load: cfldr64 mvdx14, [r0, #CRUNCH_MVDX14] cfldr64 mvdx15, [r0, #CRUNCH_MVDX15] +1: +#ifdef CONFIG_PREEMPT_COUNT + get_thread_info r10 +#endif +2: dec_preempt_count r10, r3 mov pc, lr /* diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index fc8bf18e222d..d58995c9a95a 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,97 +7,102 @@ # Configuration options for the EXYNOS4 +config ARCH_EXYNOS + bool "Samsung EXYNOS" if ARCH_MULTI_V7 + select ARCH_HAS_BANDGAP + select ARCH_HAS_CPUFREQ + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_GIC + select COMMON_CLK_SAMSUNG + select HAVE_ARM_SCU if SMP + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select PINCTRL + select PINCTRL_EXYNOS + select PM_GENERIC_DOMAINS if PM_RUNTIME + select S5P_DEV_MFC + select SRAM + help + Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) + if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" +config ARCH_EXYNOS3 + bool "SAMSUNG EXYNOS3" + select ARM_CPU_SUSPEND if PM + help + Samsung EXYNOS3 (Crotex-A7) SoC based systems + config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y - select ARM_AMBA - select CLKSRC_OF + select ARM_CPU_SUSPEND if PM_SLEEP select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select GIC_NON_BANKED select KEYBOARD_SAMSUNG if INPUT_KEYBOARD - select HAVE_ARM_SCU if SMP - select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select PINCTRL - select PM_GENERIC_DOMAINS if PM_RUNTIME - select S5P_DEV_MFC help - Samsung EXYNOS4 SoCs based systems + Samsung EXYNOS4 (Cortex-A9) SoC based systems config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" - select ARM_AMBA - select CLKSRC_OF - select HAVE_ARM_SCU if SMP - select HAVE_SMP - select PINCTRL + default y help - Samsung EXYNOS5 (Cortex-A15) SoC based systems + Samsung EXYNOS5 (Cortex-A15/A7) SoC based systems comment "EXYNOS SoCs" +config SOC_EXYNOS3250 + bool "SAMSUNG EXYNOS3250" + default y + depends on ARCH_EXYNOS3 + config CPU_EXYNOS4210 bool "SAMSUNG EXYNOS4210" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select ARM_CPU_SUSPEND if PM_SLEEP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4210 CPU support config SOC_EXYNOS4212 bool "SAMSUNG EXYNOS4212" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4212 SoC support config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4412 SoC support config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y depends on ARCH_EXYNOS5 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select PM_GENERIC_DOMAINS if PM_RUNTIME - select S5P_DEV_MFC - select SAMSUNG_DMADEV - help - Enable EXYNOS5250 SoC support + +config SOC_EXYNOS5260 + bool "SAMSUNG EXYNOS5260" + default y + depends on ARCH_EXYNOS5 + +config SOC_EXYNOS5410 + bool "SAMSUNG EXYNOS5410" + default y + depends on ARCH_EXYNOS5 config SOC_EXYNOS5420 bool "SAMSUNG EXYNOS5420" default y depends on ARCH_EXYNOS5 - select PM_GENERIC_DOMAINS if PM_RUNTIME - help - Enable EXYNOS5420 SoC support config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_HAS_BANDGAP select ARCH_HAS_OPP select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR @@ -108,6 +113,19 @@ config SOC_EXYNOS5440 help Enable EXYNOS5440 SoC support +config SOC_EXYNOS5800 + bool "SAMSUNG EXYNOS5800" + default y + depends on SOC_EXYNOS5420 + endmenu +config EXYNOS5420_MCPM + bool "Exynos5420 Multi-Cluster PM support" + depends on MCPM && SOC_EXYNOS5420 + select ARM_CCI + help + This is needed to provide CPU and cluster power management + on Exynos5420 implementing big.LITTLE. + endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index a656dbe3b78c..788f26d21141 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -5,6 +5,8 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include + obj-y := obj-m := obj-n := @@ -12,20 +14,18 @@ obj- := # Core -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o - -obj-$(CONFIG_ARCH_EXYNOS) += pmu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o - -obj-$(CONFIG_ARCH_EXYNOS) += exynos-smc.o -obj-$(CONFIG_ARCH_EXYNOS) += firmware.o +CFLAGS_hotplug.o += -march=armv7-a plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) + +obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o +CFLAGS_mcpm-exynos.o += -march=armv7-a diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9ef3f83efaff..16617bdb37a9 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -15,9 +15,107 @@ #include <linux/reboot.h> #include <linux/of.h> +#define EXYNOS3250_SOC_ID 0xE3472000 +#define EXYNOS3_SOC_MASK 0xFFFFF000 + +#define EXYNOS4210_CPU_ID 0x43210000 +#define EXYNOS4212_CPU_ID 0x43220000 +#define EXYNOS4412_CPU_ID 0xE4412200 +#define EXYNOS4_CPU_MASK 0xFFFE0000 + +#define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5410_SOC_ID 0xE5410000 +#define EXYNOS5420_SOC_ID 0xE5420000 +#define EXYNOS5440_SOC_ID 0xE5440000 +#define EXYNOS5800_SOC_ID 0xE5422000 +#define EXYNOS5_SOC_MASK 0xFFFFF000 + +extern unsigned long samsung_cpu_id; + +#define IS_SAMSUNG_CPU(name, id, mask) \ +static inline int is_samsung_##name(void) \ +{ \ + return ((samsung_cpu_id & mask) == (id & mask)); \ +} + +IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK) +IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) + +#if defined(CONFIG_SOC_EXYNOS3250) +# define soc_is_exynos3250() is_samsung_exynos3250() +#else +# define soc_is_exynos3250() 0 +#endif + +#if defined(CONFIG_CPU_EXYNOS4210) +# define soc_is_exynos4210() is_samsung_exynos4210() +#else +# define soc_is_exynos4210() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4212) +# define soc_is_exynos4212() is_samsung_exynos4212() +#else +# define soc_is_exynos4212() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4412) +# define soc_is_exynos4412() is_samsung_exynos4412() +#else +# define soc_is_exynos4412() 0 +#endif + +#define EXYNOS4210_REV_0 (0x0) +#define EXYNOS4210_REV_1_0 (0x10) +#define EXYNOS4210_REV_1_1 (0x11) + +#if defined(CONFIG_SOC_EXYNOS5250) +# define soc_is_exynos5250() is_samsung_exynos5250() +#else +# define soc_is_exynos5250() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5410) +# define soc_is_exynos5410() is_samsung_exynos5410() +#else +# define soc_is_exynos5410() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5420) +# define soc_is_exynos5420() is_samsung_exynos5420() +#else +# define soc_is_exynos5420() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5440) +# define soc_is_exynos5440() is_samsung_exynos5440() +#else +# define soc_is_exynos5440() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5800) +# define soc_is_exynos5800() is_samsung_exynos5800() +#else +# define soc_is_exynos5800() 0 +#endif + +#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ + soc_is_exynos4412()) +#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \ + soc_is_exynos5420() || soc_is_exynos5800()) + void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); struct map_desc; +extern void __iomem *sysram_ns_base_addr; +extern void __iomem *sysram_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); void exynos_cpuidle_init(void); @@ -55,12 +153,21 @@ enum sys_powerdown { NUM_SYS_POWERDOWN, }; -extern unsigned long l2x0_regs_phys; struct exynos_pmu_conf { void __iomem *reg; unsigned int val[NUM_SYS_POWERDOWN]; }; extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); +extern void exynos_cpu_power_down(int cpu); +extern void exynos_cpu_power_up(int cpu); +extern int exynos_cpu_power_state(int cpu); +extern void exynos_cluster_power_down(int cluster); +extern void exynos_cluster_power_up(int cluster); +extern int exynos_cluster_power_state(int cluster); +extern void exynos_enter_aftr(void); + +extern void s5p_init_cpu(void __iomem *cpuid_addr); +extern unsigned int samsung_rev(void); #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c deleted file mode 100644 index c57cae0e8779..000000000000 --- a/arch/arm/mach-exynos/cpuidle.c +++ /dev/null @@ -1,256 +0,0 @@ -/* linux/arch/arm/mach-exynos4/cpuidle.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/io.h> -#include <linux/export.h> -#include <linux/module.h> -#include <linux/time.h> -#include <linux/platform_device.h> - -#include <asm/proc-fns.h> -#include <asm/smp_scu.h> -#include <asm/suspend.h> -#include <asm/unified.h> -#include <asm/cpuidle.h> - -#include <plat/cpu.h> -#include <plat/pm.h> - -#include <mach/map.h> - -#include "common.h" -#include "regs-pmu.h" - -#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0)) -#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (S5P_VA_SYSRAM + 0x20) : S5P_INFORM1)) - -#define S5P_CHECK_AFTR 0xFCBA0D10 - -#define EXYNOS5_PWR_CTRL1 (S5P_VA_CMU + 0x01020) -#define EXYNOS5_PWR_CTRL2 (S5P_VA_CMU + 0x01024) - -#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) -#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) -#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) -#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) -#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) -#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) -#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) -#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) - -#define PWR_CTRL2_DIV2_UP_EN (1 << 25) -#define PWR_CTRL2_DIV1_UP_EN (1 << 24) -#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) -#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) -#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) -#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) - -static int exynos4_enter_lowpower(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); - -static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); - -static struct cpuidle_driver exynos4_idle_driver = { - .name = "exynos4_idle", - .owner = THIS_MODULE, - .states = { - [0] = ARM_CPUIDLE_WFI_STATE, - [1] = { - .enter = exynos4_enter_lowpower, - .exit_latency = 300, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "C1", - .desc = "ARM power down", - }, - }, - .state_count = 2, - .safe_state_index = 0, -}; - -/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ -static void exynos4_set_wakeupmask(void) -{ - __raw_writel(0x0000ff3e, S5P_WAKEUP_MASK); -} - -static unsigned int g_pwr_ctrl, g_diag_reg; - -static void save_cpu_arch_register(void) -{ - /*read power control register*/ - asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc"); - /*read diagnostic register*/ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -static void restore_cpu_arch_register(void) -{ - /*write power control register*/ - asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc"); - /*write diagnostic register*/ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - -static int idle_finisher(unsigned long flags) -{ - cpu_do_idle(); - return 1; -} - -static int exynos4_enter_core0_aftr(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long tmp; - - exynos4_set_wakeupmask(); - - /* Set value of power down register for aftr mode */ - exynos_sys_powerdown_conf(SYS_AFTR); - - __raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR); - __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG); - - save_cpu_arch_register(); - - /* Setting Central Sequence Register for power down mode */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - tmp &= ~S5P_CENTRAL_LOWPWR_CFG; - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - - cpu_pm_enter(); - cpu_suspend(0, idle_finisher); - -#ifdef CONFIG_SMP - if (!soc_is_exynos5250()) - scu_enable(S5P_VA_SCU); -#endif - cpu_pm_exit(); - - restore_cpu_arch_register(); - - /* - * If PMU failed while entering sleep mode, WFI will be - * ignored by PMU and then exiting cpu_do_idle(). - * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically - * in this situation. - */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { - tmp |= S5P_CENTRAL_LOWPWR_CFG; - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - } - - /* Clear wakeup state register */ - __raw_writel(0x0, S5P_WAKEUP_STAT); - - return index; -} - -static int exynos4_enter_lowpower(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - int new_index = index; - - /* AFTR can only be entered when cores other than CPU0 are offline */ - if (num_online_cpus() > 1 || dev->cpu != 0) - new_index = drv->safe_state_index; - - if (new_index == 0) - return arm_cpuidle_simple_enter(dev, drv, new_index); - else - return exynos4_enter_core0_aftr(dev, drv, new_index); -} - -static void __init exynos5_core_down_clk(void) -{ - unsigned int tmp; - - /* - * Enable arm clock down (in idle) and set arm divider - * ratios in WFI/WFE state. - */ - tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \ - PWR_CTRL1_CORE1_DOWN_RATIO | \ - PWR_CTRL1_DIV2_DOWN_EN | \ - PWR_CTRL1_DIV1_DOWN_EN | \ - PWR_CTRL1_USE_CORE1_WFE | \ - PWR_CTRL1_USE_CORE0_WFE | \ - PWR_CTRL1_USE_CORE1_WFI | \ - PWR_CTRL1_USE_CORE0_WFI; - __raw_writel(tmp, EXYNOS5_PWR_CTRL1); - - /* - * Enable arm clock up (on exiting idle). Set arm divider - * ratios when not in idle along with the standby duration - * ratios. - */ - tmp = PWR_CTRL2_DIV2_UP_EN | \ - PWR_CTRL2_DIV1_UP_EN | \ - PWR_CTRL2_DUR_STANDBY2_VAL | \ - PWR_CTRL2_DUR_STANDBY1_VAL | \ - PWR_CTRL2_CORE2_UP_RATIO | \ - PWR_CTRL2_CORE1_UP_RATIO; - __raw_writel(tmp, EXYNOS5_PWR_CTRL2); -} - -static int exynos_cpuidle_probe(struct platform_device *pdev) -{ - int cpu_id, ret; - struct cpuidle_device *device; - - if (soc_is_exynos5250()) - exynos5_core_down_clk(); - - if (soc_is_exynos5440()) - exynos4_idle_driver.state_count = 1; - - ret = cpuidle_register_driver(&exynos4_idle_driver); - if (ret) { - dev_err(&pdev->dev, "failed to register cpuidle driver\n"); - return ret; - } - - for_each_online_cpu(cpu_id) { - device = &per_cpu(exynos4_cpuidle_device, cpu_id); - device->cpu = cpu_id; - - ret = cpuidle_register_device(device); - if (ret) { - dev_err(&pdev->dev, "failed to register cpuidle device\n"); - return ret; - } - } - - return 0; -} - -static struct platform_driver exynos_cpuidle_driver = { - .probe = exynos_cpuidle_probe, - .driver = { - .name = "exynos_cpuidle", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(exynos_cpuidle_driver); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index b32a907d021d..90aab4d75d08 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -26,15 +26,10 @@ #include <asm/mach/map.h> #include <asm/memory.h> -#include <plat/cpu.h> - #include "common.h" #include "mfc.h" #include "regs-pmu.h" -#define L2_AUX_VAL 0x7C470001 -#define L2_AUX_MASK 0xC200ffff - static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -114,51 +109,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; -static struct map_desc exynos4_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc1[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4210_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4x12_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos5250_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct map_desc exynos5_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -181,11 +131,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), .length = 144 * SZ_1K, @@ -221,12 +166,16 @@ void exynos_restart(enum reboot_mode mode, const char *cmd) } static struct platform_device exynos_cpuidle = { - .name = "exynos_cpuidle", - .id = -1, + .name = "exynos_cpuidle", + .dev.platform_data = exynos_enter_aftr, + .id = -1, }; void __init exynos_cpuidle_init(void) { + if (soc_is_exynos5440()) + return; + platform_device_register(&exynos_cpuidle); } @@ -250,7 +199,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, { struct map_desc iodesc; __be32 *reg; - unsigned long len; + int len; if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock")) @@ -280,20 +229,6 @@ static void __init exynos_map_io(void) if (soc_is_exynos5()) iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - if (soc_is_exynos4210()) { - if (samsung_rev() == EXYNOS4210_REV_0) - iotable_init(exynos4_iodesc0, - ARRAY_SIZE(exynos4_iodesc0)); - else - iotable_init(exynos4_iodesc1, - ARRAY_SIZE(exynos4_iodesc1)); - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); - } - if (soc_is_exynos4212() || soc_is_exynos4412()) - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); - if (soc_is_exynos5250()) - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } void __init exynos_init_io(void) @@ -308,33 +243,6 @@ void __init exynos_init_io(void) exynos_map_io(); } -struct bus_type exynos_subsys = { - .name = "exynos-core", - .dev_name = "exynos-core", -}; - -static int __init exynos_core_init(void) -{ - return subsys_system_register(&exynos_subsys, NULL); -} -core_initcall(exynos_core_init); - -static int __init exynos4_l2x0_cache_init(void) -{ - int ret; - - ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); - if (ret) - return ret; - - if (IS_ENABLED(CONFIG_S5P_SLEEP)) { - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); - } - return 0; -} -early_initcall(exynos4_l2x0_cache_init); - static void __init exynos_dt_machine_init(void) { struct device_node *i2c_np; @@ -370,12 +278,15 @@ static void __init exynos_dt_machine_init(void) } static char const *exynos_dt_compat[] __initconst = { + "samsung,exynos3", + "samsung,exynos3250", "samsung,exynos4", "samsung,exynos4210", "samsung,exynos4212", "samsung,exynos4412", "samsung,exynos5", "samsung,exynos5250", + "samsung,exynos5260", "samsung,exynos5420", "samsung,exynos5440", NULL @@ -400,6 +311,8 @@ static void __init exynos_reserve(void) DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .l2c_aux_val = 0x3c400001, + .l2c_aux_mask = 0xc20fffff, .smp = smp_ops(exynos_smp_ops), .map_io = exynos_init_io, .init_early = exynos_firmware_init, diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 932129ef26c6..eb91d2350f8c 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -18,6 +18,7 @@ #include <mach/map.h> +#include "common.h" #include "smc.h" static int exynos_do_idle(void) @@ -28,13 +29,36 @@ static int exynos_do_idle(void) static int exynos_cpu_boot(int cpu) { + /* + * Exynos3250 doesn't need to send smc command for secondary CPU boot + * because Exynos3250 removes WFE in secure mode. + */ + if (soc_is_exynos3250()) + return 0; + + /* + * The second parameter of SMC_CMD_CPU1BOOT command means CPU id. + * But, Exynos4212 has only one secondary CPU so second parameter + * isn't used for informing secure firmware about CPU id. + */ + if (soc_is_exynos4212()) + cpu = 0; + exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0); return 0; } static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) { - void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu; + void __iomem *boot_reg; + + if (!sysram_ns_base_addr) + return -ENODEV; + + boot_reg = sysram_ns_base_addr + 0x1c; + + if (!soc_is_exynos4212() && !soc_is_exynos3250()) + boot_reg += 4*cpu; __raw_writel(boot_addr, boot_reg); return 0; diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 5eead530c6f8..69fa48397394 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -19,61 +19,9 @@ #include <asm/cp15.h> #include <asm/smp_plat.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" -static inline void cpu_enter_lowpower_a9(void) -{ - unsigned int v; - - asm volatile( - " mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %3\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - -static inline void cpu_enter_lowpower_a15(void) -{ - unsigned int v; - - asm volatile( - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "Ir" (CR_C) - : "cc"); - - flush_cache_louis(); - - asm volatile( - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (0x40) - : "cc"); - - isb(); - dsb(); -} - static inline void cpu_leave_lowpower(void) { unsigned int v; @@ -96,7 +44,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) /* make cpu1 to be turned off at next WFI command */ if (cpu == 1) - __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); + exynos_cpu_power_down(cpu); /* * here's the WFI @@ -132,19 +80,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) void __ref exynos_cpu_die(unsigned int cpu) { int spurious = 0; - int primary_part = 0; - /* - * we're ready for shutdown now, so do it. - * Exynos4 is A9 based while Exynos5 is A15; check the CPU part - * number by reading the Main ID register and then perform the - * appropriate sequence for entering low power. - */ - asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc"); - if ((primary_part & 0xfff0) == 0xc0f0) - cpu_enter_lowpower_a15(); - else - cpu_enter_lowpower_a9(); + v7_exit_coherency_flush(louis); platform_do_lowpower(cpu, &spurious); diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 7b046b59d9ec..548269a60634 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -23,13 +23,6 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM0 0x02025000 -#define EXYNOS4_PA_SYSRAM1 0x02020000 -#define EXYNOS5_PA_SYSRAM 0x02020000 -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 - #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c new file mode 100644 index 000000000000..0498d0b887ef --- /dev/null +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -0,0 +1,357 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * arch/arm/mach-exynos/mcpm-exynos.c + * + * Based on arch/arm/mach-vexpress/dcscb.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/arm-cci.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of_address.h> + +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/mcpm.h> + +#include "regs-pmu.h" +#include "common.h" + +#define EXYNOS5420_CPUS_PER_CLUSTER 4 +#define EXYNOS5420_NR_CLUSTERS 2 +#define MCPM_BOOT_ADDR_OFFSET 0x1c + +/* + * The common v7_exit_coherency_flush API could not be used because of the + * Erratum 799270 workaround. This macro is the same as the common one (in + * arch/arm/include/asm/cacheflush.h) except for the erratum handling. + */ +#define exynos_v7_exit_coherency_flush(level) \ + asm volatile( \ + "stmfd sp!, {fp, ip}\n\t"\ + "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR\n\t" \ + "bic r0, r0, #"__stringify(CR_C)"\n\t" \ + "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \ + "isb\n\t"\ + "bl v7_flush_dcache_"__stringify(level)"\n\t" \ + "clrex\n\t"\ + "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \ + "bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \ + /* Dummy Load of a device register to avoid Erratum 799270 */ \ + "ldr r4, [%0]\n\t" \ + "and r4, r4, #0\n\t" \ + "orr r0, r0, r4\n\t" \ + "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR\n\t" \ + "isb\n\t" \ + "dsb\n\t" \ + "ldmfd sp!, {fp, ip}" \ + : \ + : "Ir" (S5P_INFORM0) \ + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r9", "r10", "lr", "memory") + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; +static int +cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS]; + +#define exynos_cluster_usecnt(cluster) \ + (cpu_use_count[0][cluster] + \ + cpu_use_count[1][cluster] + \ + cpu_use_count[2][cluster] + \ + cpu_use_count[3][cluster]) + +#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster) + +static int exynos_cluster_power_control(unsigned int cluster, int enable) +{ + unsigned int tries = 100; + unsigned int val; + + if (enable) { + exynos_cluster_power_up(cluster); + val = S5P_CORE_LOCAL_PWR_EN; + } else { + exynos_cluster_power_down(cluster); + val = 0; + } + + /* Wait until cluster power control is applied */ + while (tries--) { + if (exynos_cluster_power_state(cluster) == val) + return 0; + + cpu_relax(); + } + pr_debug("timed out waiting for cluster %u to power %s\n", cluster, + enable ? "on" : "off"); + + return -ETIMEDOUT; +} + +static int exynos_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + int err = 0; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&exynos_mcpm_lock); + + cpu_use_count[cpu][cluster]++; + if (cpu_use_count[cpu][cluster] == 1) { + bool was_cluster_down = + (exynos_cluster_usecnt(cluster) == 1); + + /* + * Turn on the cluster (L2/COMMON) and then power on the + * cores. + */ + if (was_cluster_down) + err = exynos_cluster_power_control(cluster, 1); + + if (!err) + exynos_cpu_power_up(cpunr); + else + exynos_cluster_power_control(cluster, 0); + } else if (cpu_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&exynos_mcpm_lock); + local_irq_enable(); + + return err; +} + +/* + * NOTE: This function requires the stack data to be visible through power down + * and can only be executed on processors like A15 and A7 that hit the cache + * with the C bit clear in the SCTLR register. + */ +static void exynos_power_down(void) +{ + unsigned int mpidr, cpu, cluster; + bool last_man = false, skip_wfi = false; + unsigned int cpunr; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&exynos_mcpm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + cpu_use_count[cpu][cluster]--; + if (cpu_use_count[cpu][cluster] == 0) { + exynos_cpu_power_down(cpunr); + + if (exynos_cluster_unused(cluster)) + /* TODO: Turn off the cluster here to save power. */ + last_man = true; + } else if (cpu_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else { + BUG(); + } + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&exynos_mcpm_lock); + + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) { + /* + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. + */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n\t" + "isb\n\t" + "dsb" + : : "r" (0x400)); + } + + /* Flush all cache levels for this cluster. */ + exynos_v7_exit_coherency_flush(all); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(mpidr); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + arch_spin_unlock(&exynos_mcpm_lock); + + /* Disable and flush the local CPU cache. */ + exynos_v7_exit_coherency_flush(louis); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (!skip_wfi) + wfi(); + + /* Not dead at this point? Let our caller cope. */ +} + +static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) +{ + unsigned int tries = 100; + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + /* Wait for the core state to be OFF */ + while (tries--) { + if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) { + if ((exynos_cpu_power_state(cpunr) == 0)) + return 0; /* success: the CPU is halted */ + } + + /* Otherwise, wait and retry: */ + msleep(1); + } + + return -ETIMEDOUT; /* timeout */ +} + +static const struct mcpm_platform_ops exynos_power_ops = { + .power_up = exynos_power_up, + .power_down = exynos_power_down, + .wait_for_powerdown = exynos_wait_for_powerdown, +}; + +static void __init exynos_mcpm_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + cpu_use_count[cpu][cluster] = 1; +} + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + */ +static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) +{ + asm volatile ("\n" + "cmp r0, #1\n" + "bxne lr\n" + "b cci_enable_port_for_self"); +} + +static const struct of_device_id exynos_dt_mcpm_match[] = { + { .compatible = "samsung,exynos5420" }, + { .compatible = "samsung,exynos5800" }, + {}, +}; + +static int __init exynos_mcpm_init(void) +{ + struct device_node *node; + void __iomem *ns_sram_base_addr; + int ret; + + node = of_find_matching_node(NULL, exynos_dt_mcpm_match); + if (!node) + return -ENODEV; + of_node_put(node); + + if (!cci_probed()) + return -ENODEV; + + node = of_find_compatible_node(NULL, NULL, + "samsung,exynos4210-sysram-ns"); + if (!node) + return -ENODEV; + + ns_sram_base_addr = of_iomap(node, 0); + of_node_put(node); + if (!ns_sram_base_addr) { + pr_err("failed to map non-secure iRAM base address\n"); + return -ENOMEM; + } + + /* + * To increase the stability of KFC reset we need to program + * the PMU SPARE3 register + */ + __raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3); + + exynos_mcpm_usage_count_init(); + + ret = mcpm_platform_register(&exynos_power_ops); + if (!ret) + ret = mcpm_sync_init(exynos_pm_power_up_setup); + if (ret) { + iounmap(ns_sram_base_addr); + return ret; + } + + mcpm_smp_set_ops(); + + pr_info("Exynos MCPM support installed\n"); + + /* + * Future entries into the kernel can now go + * through the cluster entry vectors. + */ + __raw_writel(virt_to_phys(mcpm_entry_point), + ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET); + + iounmap(ns_sram_base_addr); + + return ret; +} + +early_initcall(exynos_mcpm_init); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 03e5e9f94705..ec02422e8499 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,24 +20,45 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/firmware.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" extern void exynos4_secondary_startup(void); +void __iomem *sysram_base_addr; +void __iomem *sysram_ns_base_addr; + +static void __init exynos_smp_prepare_sysram(void) +{ + struct device_node *node; + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { + if (!of_device_is_available(node)) + continue; + sysram_base_addr = of_iomap(node, 0); + break; + } + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { + if (!of_device_is_available(node)) + continue; + sysram_ns_base_addr = of_iomap(node, 0); + break; + } +} + static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) return S5P_INFORM5; - return S5P_VA_SYSRAM; + return sysram_base_addr; } static inline void __iomem *cpu_boot_reg(int cpu) @@ -45,9 +66,11 @@ static inline void __iomem *cpu_boot_reg(int cpu) void __iomem *boot_reg; boot_reg = cpu_boot_reg_base(); + if (!boot_reg) + return ERR_PTR(-ENODEV); if (soc_is_exynos4412()) boot_reg += 4*cpu; - else if (soc_is_exynos5420()) + else if (soc_is_exynos5420() || soc_is_exynos5800()) boot_reg += 4; return boot_reg; } @@ -90,6 +113,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; unsigned long phys_cpu = cpu_logical_map(cpu); + int ret = -ENOSYS; /* * Set synchronisation state between this boot processor @@ -107,15 +131,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(phys_cpu); - if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { - __raw_writel(S5P_CORE_LOCAL_PWR_EN, - S5P_ARM_CORE1_CONFIGURATION); - + if (!exynos_cpu_power_state(cpu)) { + exynos_cpu_power_up(cpu); timeout = 10; /* wait max 10 ms until cpu1 is on */ - while ((__raw_readl(S5P_ARM_CORE1_STATUS) - & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) { + while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) { if (timeout-- == 0) break; @@ -146,8 +167,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * Try to set boot address using firmware first * and fall back to boot register if it fails. */ - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + goto fail; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) { + ret = PTR_ERR(boot_reg); + goto fail; + } __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } call_firmware_op(cpu_boot, phys_cpu); @@ -163,9 +194,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ +fail: spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return pen_release != -1 ? ret : 0; } /* @@ -205,6 +237,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); + exynos_smp_prepare_sysram(); + /* * Write the address of secondary startup into the * system-wide flags register. The boot monitor waits @@ -217,12 +251,21 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) for (i = 1; i < max_cpus; ++i) { unsigned long phys_cpu; unsigned long boot_addr; + int ret; phys_cpu = cpu_logical_map(i); boot_addr = virt_to_phys(exynos4_secondary_startup); - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + break; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) + break; __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } } } diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 15af0ceb0a66..87c0d34c7fba 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/suspend.h> #include <linux/syscore_ops.h> +#include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> #include <linux/err.h> @@ -26,7 +27,6 @@ #include <asm/smp_scu.h> #include <asm/suspend.h> -#include <plat/cpu.h> #include <plat/pm-common.h> #include <plat/pll.h> #include <plat/regs-srom.h> @@ -100,9 +100,141 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) return -ENOENT; } +/** + * exynos_core_power_down : power down the specified cpu + * @cpu : the cpu to power down + * + * Power down the specified cpu. The sequence must be finished by a + * call to cpu_do_idle() + * + */ +void exynos_cpu_power_down(int cpu) +{ + __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_up : power up the specified cpu + * @cpu : the cpu to power up + * + * Power up the specified cpu + */ +void exynos_cpu_power_up(int cpu) +{ + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_state : returns the power state of the cpu + * @cpu : the cpu to retrieve the power state from + * + */ +int exynos_cpu_power_state(int cpu) +{ + return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) & + S5P_CORE_LOCAL_PWR_EN); +} + +/** + * exynos_cluster_power_down : power down the specified cluster + * @cluster : the cluster to power down + */ +void exynos_cluster_power_down(int cluster) +{ + __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_up : power up the specified cluster + * @cluster : the cluster to power up + */ +void exynos_cluster_power_up(int cluster) +{ + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_state : returns the power state of the cluster + * @cluster : the cluster to retrieve the power state from + * + */ +int exynos_cluster_power_state(int cluster) +{ + return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) & + S5P_CORE_LOCAL_PWR_EN); +} + +#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (sysram_base_addr + 0x24) : S5P_INFORM0)) +#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (sysram_base_addr + 0x20) : S5P_INFORM1)) + +#define S5P_CHECK_AFTR 0xFCBA0D10 +#define S5P_CHECK_SLEEP 0x00000BAD + +/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ +static void exynos_set_wakeupmask(long mask) +{ + __raw_writel(mask, S5P_WAKEUP_MASK); +} + +static void exynos_cpu_set_boot_vector(long flags) +{ + __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR); + __raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG); +} + +void exynos_enter_aftr(void) +{ + exynos_set_wakeupmask(0x0000ff3e); + exynos_cpu_set_boot_vector(S5P_CHECK_AFTR); + /* Set value of power down register for aftr mode */ + exynos_sys_powerdown_conf(SYS_AFTR); +} + /* For Cortex-A9 Diagnostic and Power control register */ static unsigned int save_arm_register[2]; +static void exynos_cpu_save_register(void) +{ + unsigned long tmp; + + /* Save Power control register */ + asm ("mrc p15, 0, %0, c15, c0, 0" + : "=r" (tmp) : : "cc"); + + save_arm_register[0] = tmp; + + /* Save Diagnostic register */ + asm ("mrc p15, 0, %0, c15, c0, 1" + : "=r" (tmp) : : "cc"); + + save_arm_register[1] = tmp; +} + +static void exynos_cpu_restore_register(void) +{ + unsigned long tmp; + + /* Restore Power control register */ + tmp = save_arm_register[0]; + + asm volatile ("mcr p15, 0, %0, c15, c0, 0" + : : "r" (tmp) + : "cc"); + + /* Restore Diagnostic register */ + tmp = save_arm_register[1]; + + asm volatile ("mcr p15, 0, %0, c15, c0, 1" + : : "r" (tmp) + : "cc"); +} + static int exynos_cpu_suspend(unsigned long arg) { #ifdef CONFIG_CACHE_L2X0 @@ -147,37 +279,34 @@ static void exynos_pm_prepare(void) __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); } -static int exynos_pm_suspend(void) +static void exynos_pm_central_suspend(void) { unsigned long tmp; /* Setting Central Sequence Register for power down mode */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); tmp &= ~S5P_CENTRAL_LOWPWR_CFG; __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); +} + +static int exynos_pm_suspend(void) +{ + unsigned long tmp; + + exynos_pm_central_suspend(); /* Setting SEQ_OPTION register */ tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (!soc_is_exynos5250()) { - /* Save Power control register */ - asm ("mrc p15, 0, %0, c15, c0, 0" - : "=r" (tmp) : : "cc"); - save_arm_register[0] = tmp; - - /* Save Diagnostic register */ - asm ("mrc p15, 0, %0, c15, c0, 1" - : "=r" (tmp) : : "cc"); - save_arm_register[1] = tmp; - } + if (!soc_is_exynos5250()) + exynos_cpu_save_register(); return 0; } -static void exynos_pm_resume(void) +static int exynos_pm_central_resume(void) { unsigned long tmp; @@ -194,22 +323,20 @@ static void exynos_pm_resume(void) /* clear the wakeup state register */ __raw_writel(0x0, S5P_WAKEUP_STAT); /* No need to perform below restore code */ - goto early_wakeup; - } - if (!soc_is_exynos5250()) { - /* Restore Power control register */ - tmp = save_arm_register[0]; - asm volatile ("mcr p15, 0, %0, c15, c0, 0" - : : "r" (tmp) - : "cc"); - - /* Restore Diagnostic register */ - tmp = save_arm_register[1]; - asm volatile ("mcr p15, 0, %0, c15, c0, 1" - : : "r" (tmp) - : "cc"); + return -1; } + return 0; +} + +static void exynos_pm_resume(void) +{ + if (exynos_pm_central_resume()) + goto early_wakeup; + + if (!soc_is_exynos5250()) + exynos_cpu_restore_register(); + /* For release retention */ __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); @@ -226,7 +353,7 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250()) + if (!soc_is_exynos5250()) scu_enable(S5P_VA_SCU); early_wakeup: @@ -304,10 +431,42 @@ static const struct platform_suspend_ops exynos_suspend_ops = { .valid = suspend_valid_only_mem, }; +static int exynos_cpu_pm_notifier(struct notifier_block *self, + unsigned long cmd, void *v) +{ + int cpu = smp_processor_id(); + + switch (cmd) { + case CPU_PM_ENTER: + if (cpu == 0) { + exynos_pm_central_suspend(); + exynos_cpu_save_register(); + } + break; + + case CPU_PM_EXIT: + if (cpu == 0) { + if (!soc_is_exynos5250()) + scu_enable(S5P_VA_SCU); + exynos_cpu_restore_register(); + exynos_pm_central_resume(); + } + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block exynos_cpu_pm_notifier_block = { + .notifier_call = exynos_cpu_pm_notifier, +}; + void __init exynos_pm_init(void) { u32 tmp; + cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block); + /* Platform-specific GIC callback */ gic_arch_extn.irq_set_wake = exynos_irq_set_wake; diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index 05c7ce15322a..fb0deda3b3a4 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -13,8 +13,6 @@ #include <linux/kernel.h> #include <linux/bug.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 4f6a2560d022..1d13b08708f0 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -38,6 +38,7 @@ #define S5P_INFORM5 S5P_PMUREG(0x0814) #define S5P_INFORM6 S5P_PMUREG(0x0818) #define S5P_INFORM7 S5P_PMUREG(0x081C) +#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C) #define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) #define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004) @@ -105,8 +106,17 @@ #define S5P_GPS_LOWPWR S5P_PMUREG(0x139C) #define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0) -#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080) -#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084) +#define EXYNOS_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000) +#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \ + (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_ARM_CORE_STATUS(_nr) \ + (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) + +#define EXYNOS_ARM_COMMON_CONFIGURATION S5P_PMUREG(0x2500) +#define EXYNOS_COMMON_CONFIGURATION(_nr) \ + (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_COMMON_STATUS(_nr) \ + (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4) #define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) #define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) @@ -119,8 +129,6 @@ #define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_INT_LOCAL_PWR_EN 0x7 -#define S5P_CHECK_SLEEP 0x00000BAD - /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) #define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) @@ -313,4 +321,6 @@ #define EXYNOS5_OPTION_USE_RETENTION (1 << 4) +#define EXYNOS5420_SWRESET_KFC_SEL 0x3 + #endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index a2613e944e10..108a45f4bb62 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -16,8 +16,6 @@ */ #include <linux/linkage.h> -#include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410fc090 @@ -53,33 +51,7 @@ ENTRY(exynos_cpu_resume) and r0, r0, r1 ldr r1, =CPU_CORTEX_A9 cmp r0, r1 - bne skip_l2_resume - adr r0, l2x0_regs_phys - ldr r0, [r0] - cmp r0, #0 - beq skip_l2_resume - ldr r1, [r0, #L2X0_R_PHY_BASE] - ldr r2, [r1, #L2X0_CTRL] - tst r2, #0x1 - bne skip_l2_resume - ldr r2, [r0, #L2X0_R_AUX_CTRL] - str r2, [r1, #L2X0_AUX_CTRL] - ldr r2, [r0, #L2X0_R_TAG_LATENCY] - str r2, [r1, #L2X0_TAG_LATENCY_CTRL] - ldr r2, [r0, #L2X0_R_DATA_LATENCY] - str r2, [r1, #L2X0_DATA_LATENCY_CTRL] - ldr r2, [r0, #L2X0_R_PREFETCH_CTRL] - str r2, [r1, #L2X0_PREFETCH_CTRL] - ldr r2, [r0, #L2X0_R_PWR_CTRL] - str r2, [r1, #L2X0_POWER_CTRL] - mov r2, #1 - str r2, [r1, #L2X0_CTRL] -skip_l2_resume: + bleq l2c310_early_resume #endif b cpu_resume ENDPROC(exynos_cpu_resume) -#ifdef CONFIG_CACHE_L2X0 - .globl l2x0_regs_phys -l2x0_regs_phys: - .long 0 -#endif diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index da0415094856..8f05489671b7 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -76,7 +76,7 @@ __initcall(cats_hw_init); * hard reboots fail on early boards. */ static void __init -fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_cats(struct tag *tags, char **cmdline) { #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) screen_info.orig_video_lines = 25; diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index eb1fa5c84723..cdee08c6d239 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -620,7 +620,7 @@ __initcall(nw_hw_init); * the parameter page. */ static void __init -fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_netwinder(struct tag *tags, char **cmdline) { #ifdef CONFIG_ISAPNP extern int isapnp_disable; diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index c7de89b263dd..8c35ae4ff176 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -51,11 +51,13 @@ static void __init highbank_scu_map_io(void) } -static void highbank_l2x0_disable(void) +static void highbank_l2c310_write_sec(unsigned long val, unsigned reg) { - outer_flush_all(); - /* Disable PL310 L2 Cache controller */ - highbank_smc1(0x102, 0x0); + if (reg == L2X0_CTRL) + highbank_smc1(0x102, val); + else + WARN_ONCE(1, "Highbank L2C310: ignoring write to reg 0x%x\n", + reg); } static void __init highbank_init_irq(void) @@ -64,14 +66,6 @@ static void __init highbank_init_irq(void) if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) highbank_scu_map_io(); - - /* Enable PL310 L2 Cache controller */ - if (IS_ENABLED(CONFIG_CACHE_L2X0) && - of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) { - highbank_smc1(0x102, 0x1); - l2x0_of_init(0, ~0UL); - outer_cache.disable = highbank_l2x0_disable; - } } static void highbank_power_off(void) @@ -185,6 +179,9 @@ DT_MACHINE_START(HIGHBANK, "Highbank") #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) .dma_zone_size = (4ULL * SZ_1G), #endif + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .l2c_write_sec = highbank_l2c310_write_sec, .init_irq = highbank_init_irq, .init_machine = highbank_init, .dt_compat = highbank_match, diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5740296dc429..8d42eab76d53 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -702,61 +702,6 @@ endif if ARCH_MULTI_V7 -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX51 - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX51 - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - comment "Device tree only" config SOC_IMX50 @@ -768,6 +713,12 @@ config SOC_IMX50 help This enables support for Freescale i.MX50 processor. +config MACH_IMX51_DT + bool "i.MX51 support" + select SOC_IMX51 + help + This enables support for Freescale i.MX51 processor + config SOC_IMX53 bool "i.MX53 support" select HAVE_IMX_SRC @@ -796,7 +747,6 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI select PINCTRL_IMX6Q select SOC_IMX6 @@ -812,6 +762,14 @@ config SOC_IMX6SL help This enables support for Freescale i.MX6 SoloLite processor. +config SOC_IMX6SX + bool "i.MX6 SoloX support" + select PINCTRL_IMX6SX + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloX processor. + config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f4ed83032dd0..bbe93bbfd003 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o ifeq ($(CONFIG_SUSPEND),y) AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a @@ -108,11 +109,6 @@ obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o endif obj-$(CONFIG_SOC_IMX6) += pm-imx6.o -# i.MX5 based machines -obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o - obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_SOC_IMX50) += mach-imx50.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 8d1df2e4b7ac..24b103c67f82 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -135,7 +135,7 @@ static __init void avic_init_gc(int idx, unsigned int irq_start) irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) +static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) { u32 nivector; @@ -190,6 +190,8 @@ void __init mxc_init_irq(void __iomem *irqbase) for (i = 0; i < 8; i++) __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); + set_handle_irq(avic_handle_irq); + #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(FIQ_START); diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index a2ecc006b322..4ba587da89d2 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -27,48 +27,61 @@ * parent - fixed parent. No clk_set_parent support */ -#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) +struct clk_gate2 { + struct clk_hw hw; + void __iomem *reg; + u8 bit_idx; + u8 flags; + spinlock_t *lock; + unsigned int *share_count; +}; + +#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw) static int clk_gate2_enable(struct clk_hw *hw) { - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); u32 reg; unsigned long flags = 0; - if (gate->lock) - spin_lock_irqsave(gate->lock, flags); + spin_lock_irqsave(gate->lock, flags); + + if (gate->share_count && (*gate->share_count)++ > 0) + goto out; reg = readl(gate->reg); reg |= 3 << gate->bit_idx; writel(reg, gate->reg); - if (gate->lock) - spin_unlock_irqrestore(gate->lock, flags); +out: + spin_unlock_irqrestore(gate->lock, flags); return 0; } static void clk_gate2_disable(struct clk_hw *hw) { - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); u32 reg; unsigned long flags = 0; - if (gate->lock) - spin_lock_irqsave(gate->lock, flags); + spin_lock_irqsave(gate->lock, flags); + + if (gate->share_count && --(*gate->share_count) > 0) + goto out; reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); writel(reg, gate->reg); - if (gate->lock) - spin_unlock_irqrestore(gate->lock, flags); +out: + spin_unlock_irqrestore(gate->lock, flags); } static int clk_gate2_is_enabled(struct clk_hw *hw) { u32 reg; - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); reg = readl(gate->reg); @@ -87,21 +100,23 @@ static struct clk_ops clk_gate2_ops = { struct clk *clk_register_gate2(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, - u8 clk_gate2_flags, spinlock_t *lock) + u8 clk_gate2_flags, spinlock_t *lock, + unsigned int *share_count) { - struct clk_gate *gate; + struct clk_gate2 *gate; struct clk *clk; struct clk_init_data init; - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL); if (!gate) return ERR_PTR(-ENOMEM); - /* struct clk_gate assignments */ + /* struct clk_gate2 assignments */ gate->reg = reg; gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + gate->share_count = share_count; init.name = name; init.ops = &clk_gate2_ops; diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 15f9d223cf0b..7f739be3de2c 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -40,12 +40,14 @@ #define SCM_GCCR IO_ADDR_SCM(0xc) static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", }; -static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem", - "fclk", }; +static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", + "prem", "fclk", }; + enum imx1_clks { - dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu, - fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate, - mma_gate, usbd_gate, clk_max + dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate, + spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko, + uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate, + usbd_gate, clk_max }; static struct clk *clk[clk_max]; @@ -62,17 +64,22 @@ int __init mx1_clocks_init(unsigned long fref) clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks)); clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0); + clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0); clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0); + clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1); clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1); - clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1); - clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4); - clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3); - clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4); - clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4); - clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7); + clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1); + clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4); + clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3); + clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4); + clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4); + clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7); clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); - clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4); + clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6); + clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5); + clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4); + clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3); clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2); clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1); clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0); @@ -84,9 +91,6 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma"); clk_register_clkdev(clk[hclk], "ipg", "imx1-dma"); - clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0"); - clk_register_clkdev(clk[mma_gate], "mma", NULL); - clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0"); clk_register_clkdev(clk[per1], "per", "imx-gpt.0"); clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[per1], "per", "imx1-uart.0"); @@ -94,20 +98,15 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[per1], "per", "imx1-uart.1"); clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1"); clk_register_clkdev(clk[per1], "per", "imx1-uart.2"); - clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2"); + clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2"); clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.0"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.1"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1"); - clk_register_clkdev(clk[per2], NULL, "imx-mmc.0"); clk_register_clkdev(clk[per2], "per", "imx1-fb.0"); clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0"); clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0"); - clk_register_clkdev(clk[hclk], "mshc", NULL); - clk_register_clkdev(clk[per3], "ssi", NULL); - clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0"); - clk_register_clkdev(clk[clko], "clko", NULL); mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index dc36e6c2f1da..ae578c096ad8 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -62,6 +62,10 @@ static struct clk_onecell_data clk_data; static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", }; static const char *per_sel_clks[] = { "ahb", "upll", }; +static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb", + "ipg", "dummy", "dummy", "dummy", + "dummy", "dummy", "per0", "per2", + "per13", "per14", "usbotg_ahb", "dummy",}; enum mx25_clks { dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg, @@ -82,7 +86,7 @@ enum mx25_clks { pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg, sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17, - wdt_ipg, clk_max + wdt_ipg, cko_div, cko_sel, cko, clk_max }; static struct clk *clk[clk_max]; @@ -117,6 +121,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate) clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); + clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6); + clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks)); + clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30); clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6); clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6); clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6); @@ -230,6 +237,12 @@ static int __init __mx25_clocks_init(unsigned long osc_rate) clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); + /* + * Let's initially set up CLKO parent as ipg, since this configuration + * is used on some imx25 board designs to clock the audio codec. + */ + clk_set_parent(clk[cko_sel], clk[ipg]); + return 0; } @@ -304,8 +317,6 @@ int __init mx25_clocks_init(void) int __init mx25_clocks_init_dt(void) { struct device_node *np; - void __iomem *base; - int irq; unsigned long osc_rate = 24000000; /* retrieve the freqency of fixed clocks from device tree */ @@ -325,12 +336,7 @@ int __init mx25_clocks_init_dt(void) __mx25_clocks_init(osc_rate); - np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt")); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index d2da8908b268..317a662626d6 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -82,7 +82,8 @@ enum mx27_clks { csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, - mpll_sel, spll_gate, clk_max + mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate, + rtic_ahb_gate, mshc_baud_gate, clk_max }; static struct clk *clk[clk_max]; @@ -117,6 +118,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1); } + clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6); clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4); clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6); clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6); @@ -145,9 +147,11 @@ int __init mx27_clocks_init(unsigned long fref) clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5); clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6); clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7); + clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8); clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9); clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11); clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12); + clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13); clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14); clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15); clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16); @@ -166,6 +170,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29); clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30); clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31); + clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2); clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3); clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4); clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5); @@ -177,6 +182,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11); clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12); clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13); + clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14); clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15); clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16); clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17); @@ -221,16 +227,6 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5"); clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1"); - clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2"); - clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3"); - clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4"); - clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0"); clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1"); @@ -278,14 +274,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0"); clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); - clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); - clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); - clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); - clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); - clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); - clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], NULL, "cpu0"); - clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); @@ -296,7 +285,6 @@ int __init mx27_clocks_init(unsigned long fref) return 0; } -#ifdef CONFIG_OF int __init mx27_clocks_init_dt(void) { struct device_node *np; @@ -312,4 +300,3 @@ int __init mx27_clocks_init_dt(void) return mx27_clocks_init(fref); } -#endif diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index b5b65f3efaf1..4a9de0835eb1 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -191,7 +191,6 @@ int __init mx31_clocks_init(unsigned long fref) return 0; } -#ifdef CONFIG_OF int __init mx31_clocks_init_dt(void) { struct device_node *np; @@ -207,4 +206,3 @@ int __init mx31_clocks_init_dt(void) return mx31_clocks_init(fref); } -#endif diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index a4d5e425cd82..71c86a2f856d 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -289,14 +289,12 @@ int __init mx35_clocks_init(void) return 0; } -static int __init mx35_clocks_init_dt(struct device_node *ccm_node) +static void __init mx35_clocks_init_dt(struct device_node *ccm_node) { clk_data.clks = clk; clk_data.clk_num = ARRAY_SIZE(clk); of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data); mx35_clocks_init(); - - return 0; } CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 568ef0a4de84..21d2b111c83d 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -322,9 +322,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, static void __init mx50_clocks_init(struct device_node *np) { - void __iomem *base; unsigned long r; - int i, irq; + int i; clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -372,11 +371,7 @@ static void __init mx50_clocks_init(struct device_node *np) r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000); clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r); - np = of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt")); } CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init); @@ -436,7 +431,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL); - clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0"); clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0"); clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0"); @@ -492,9 +486,8 @@ CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt); static void __init mx53_clocks_init(struct device_node *np) { - int i, irq; + int i; unsigned long r; - void __iomem *base; clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -561,7 +554,6 @@ static void __init mx53_clocks_init(struct device_node *np) mx5_clocks_common_init(0, 0, 0, 0); - clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0"); clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0"); @@ -592,10 +584,6 @@ static void __init mx53_clocks_init(struct device_node *np) r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000); clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r); - np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt")); } CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 2b4d6acfa34a..8e795dea02ec 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -107,7 +107,7 @@ enum mx6q_clks { sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, - lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max + lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max }; static struct clk *clk[clk_max]; @@ -140,11 +140,13 @@ static struct clk_div_table video_div_table[] = { { /* sentinel */ } }; +static unsigned int share_count_esai; + static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int i, irq; + int i; int ret; clk[dummy] = imx_clk_fixed("dummy", 0); @@ -352,9 +354,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); - clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); + if (cpu_is_imx6dl()) + /* ecspi5 is replaced with i2c4 on imx6dl & imx6s */ + clk[ecspi5] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8); + else + clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); - clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16); + clk[esai] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai); + clk[esai_ahb] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai); clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); if (cpu_is_imx6dl()) @@ -489,10 +496,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt")); } CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index f7073c0782fb..21cf06cebade 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -169,7 +169,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int irq; int i; int ret; @@ -385,9 +384,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) imx6q_set_lpm(WAIT_CLOCKED); np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(np); } CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c new file mode 100644 index 000000000000..72f8902235d1 --- /dev/null +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -0,0 +1,524 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/clock/imx6sx-clock.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/types.h> + +#include "clk.h" +#include "common.h" + +#define CCDR 0x4 +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) + +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; +static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; +static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", }; +static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", }; +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *pcie_axi_sels[] = { "axi", "ahb", }; +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", }; +static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", }; +static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", }; +static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; +static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", }; +static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; +static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", }; +static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", }; +static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; +static const char *cko1_sels[] = { + "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", + "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix", + "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div", +}; +static const char *cko2_sels[] = { + "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck", + "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core", + "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core", + "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy", + "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial", + "spdif", "asrc", "dummy", +}; +static const char *cko_sels[] = { "cko1", "cko2", }; +static const char *lvds_sels[] = { + "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div", + "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2", +}; + +static struct clk *clks[IMX6SX_CLK_CLK_END]; +static struct clk_onecell_data clk_data; + +static int const clks_init_on[] __initconst = { + IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3, + IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3, + IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG, + IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM, + IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4, + IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG, + IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5, + IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG, + IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1, + IMX6SX_CLK_EPIT2, +}; + +static struct clk_div_table clk_enet_ref_table[] = { + { .val = 0, .div = 20, }, + { .val = 1, .div = 10, }, + { .val = 2, .div = 5, }, + { .val = 3, .div = 4, }, + { } +}; + +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static u32 share_count_asrc; +static u32 share_count_audio; +static u32 share_count_esai; + +static void __init imx6sx_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + int i; + + clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + + clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); + clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); + + /* ipp_di clock is external input */ + clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); + clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + /* type name parent_name base div_mask */ + clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); + clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); + clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); + clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); + clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); + clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); + clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + + /* + * Bit 20 is the reserved and read-only bit, we do this only for: + * - Do nothing for usbphy clk_enable/disable + * - Keep refcount when do usbphy clk_enable/disable, in that case, + * the clk framework may need to enable/disable usbphy's parent + */ + clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + + /* + * usbphy*_gate needs to be on after system boots up, and software + * never needs to control it anymore. + */ + clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); + + /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */ + clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5); + clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); + + clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10); + + clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, + base + 0xe0, 0, 2, 0, clk_enet_ref_table, + &imx_ccm_lock); + clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0, + base + 0xe0, 2, 2, 0, clk_enet_ref_table, + &imx_ccm_lock); + clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20); + + clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20); + clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21); + + /* name parent_name reg idx */ + clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); + clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); + clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); + clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); + clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); + + /* name parent_name mult div */ + clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); + clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); + + clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", + CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", + CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", + CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", + CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + + /* name reg shift width parent_names num_parents */ + clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + imx6q_pm_set_ccm_base(base); + + /* name reg shift width parent_names num_parents */ + clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); + clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels)); + clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); + clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); + clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); + clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels)); + clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels)); + clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels)); + clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels)); + clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels)); + clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels)); + clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels)); + clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels)); + clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels)); + clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels)); + clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels)); + clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels)); + clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); + clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels)); + clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels)); + + clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT); + + /* name parent_name reg shift width */ + clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3); + clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3); + clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3); + clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3); + clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3); + clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3); + clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2); + clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6); + clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); + clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); + clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); + clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); + clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3); + clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6); + clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); + clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); + clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3); + clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3); + clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3); + clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3); + clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3); + clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3); + clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3); + clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3); + clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); + clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); + + clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); + clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); + + /* name reg shift width busy: reg, shift parent_names num_parents */ + clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + /* name parent_name reg shift width busy: reg, shift */ + clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0); + clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + + /* name parent_name reg shift */ + /* CCGR0 */ + clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); + clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); + clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); + clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); + clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); + clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8); + clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10); + clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12); + clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); + clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16); + clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); + clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20); + clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24); + clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26); + clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); + + /* CCGR1 */ + clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); + clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); + clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); + clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); + clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8); + clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18); + clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20); + clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22); + clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26); + clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30); + + /* CCGR2 */ + clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2); + clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14); + clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16); + clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18); + clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20); + clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22); + clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28); + clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30); + + /* CCGR3 */ + clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2); + clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4); + clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4); + clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6); + clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8); + clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10); + clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12); + clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14); + clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18); + clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); + clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); + clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28); + + /* CCGR4 */ + clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0); + clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10); + clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); + clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14); + clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24); + clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); + clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28); + clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + + /* CCGR5 */ + clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); + clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); + clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); + clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); + clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); + clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); + clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); + clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); + clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26); + clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28); + clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30); + clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28); + clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30); + + /* CCGR6 */ + clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); + clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10); + clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16); + clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20); + clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22); + clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24); + clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26); + clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28); + clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30); + + clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); + clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24); + + /* mask handshake of mmdc */ + writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) + pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i])); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0"); + clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]); + clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]); + } + + /* Set the default 132MHz for EIM module */ + clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); + clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000); + + /* set parent clock for LCDIF1 pixel clock */ + clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]); + + /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */ + if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M])) + pr_err("Failed to set pcie bus parent clk.\n"); + if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI])) + pr_err("Failed to set pcie parent clk.\n"); + + /* + * Init enet system AHB clock, set to 200Mhz + * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB + */ + clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); + clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]); + clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000); + clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000); + clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000); + + /* Audio clocks */ + clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000); + + clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000); + + clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]); + clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000); + + clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000); + clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000); + clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000); + + clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000); + + /* Set parent clock for vadc */ + clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]); + + /* default parent of can_sel clock is invalid, manually set it here */ + clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]); + + /* Update gpu clock from default 528M to 720M */ + clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt"); + mxc_timer_init_dt(np); +} +CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 048c5ad8a80b..e29f6ebe9f39 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -28,7 +28,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, struct clk *clk_register_gate2(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, - u8 clk_gate_flags, spinlock_t *lock); + u8 clk_gate_flags, spinlock_t *lock, + unsigned int *share_count); struct clk * imx_obtain_fixed_clock( const char *name, unsigned long rate); @@ -37,7 +38,15 @@ static inline struct clk *imx_clk_gate2(const char *name, const char *parent, void __iomem *reg, u8 shift) { return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg, - shift, 0, &imx_ccm_lock); + shift, 0, &imx_ccm_lock, NULL); +} + +static inline struct clk *imx_clk_gate2_shared(const char *name, + const char *parent, void __iomem *reg, u8 shift, + unsigned int *share_count) +{ + return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg, + shift, 0, &imx_ccm_lock, share_count); } struct clk *imx_clk_pfd(const char *name, const char *parent_name, diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index b5241ea76706..9ab785ce13e8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -17,6 +17,7 @@ struct irq_data; struct platform_device; struct pt_regs; struct clk; +struct device_node; enum mxc_cpu_pwr_mode; void mx1_map_io(void); @@ -56,6 +57,7 @@ void imx51_init_late(void); void imx53_init_late(void); void epit_timer_init(void __iomem *base, int irq); void mxc_timer_init(void __iomem *, int); +void mxc_timer_init_dt(struct device_node *); int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx25_clocks_init(void); @@ -99,19 +101,6 @@ enum mx3_cpu_pwr_mode { void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); void imx_print_silicon_rev(const char *cpu, int srev); -void avic_handle_irq(struct pt_regs *); -void tzic_handle_irq(struct pt_regs *); - -#define imx1_handle_irq avic_handle_irq -#define imx21_handle_irq avic_handle_irq -#define imx25_handle_irq avic_handle_irq -#define imx27_handle_irq avic_handle_irq -#define imx31_handle_irq avic_handle_irq -#define imx35_handle_irq avic_handle_irq -#define imx50_handle_irq tzic_handle_irq -#define imx51_handle_irq tzic_handle_irq -#define imx53_handle_irq tzic_handle_irq - void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); u32 imx_get_cpu_arg(int cpu); diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index ba3b498a67ec..bbe8ff1f0412 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -111,6 +111,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6DL: soc_id = "i.MX6DL"; break; + case MXC_CPU_IMX6SX: + soc_id = "i.MX6SX"; + break; case MXC_CPU_IMX6Q: soc_id = "i.MX6Q"; break; diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c index fc4dd7cedc11..6bd7c3f37ac0 100644 --- a/arch/arm/mach-imx/devices/platform-ipu-core.c +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c @@ -77,7 +77,7 @@ struct platform_device *__init imx_alloc_mx3_camera( pdev = platform_device_alloc("mx3-camera", 0); if (!pdev) - goto err; + return ERR_PTR(-ENOMEM); pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); if (!pdev->dev.dma_mask) diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c index 11bd01d402f2..0dc0651825b1 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-emma.c +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -12,7 +12,7 @@ #define imx_mx2_emmaprp_data_entry_single(soc) \ { \ .iobase = soc ## _EMMAPRP_BASE_ADDR, \ - .iosize = SZ_32, \ + .iosize = SZ_256, \ .irq = soc ## _INT_EMMAPRP, \ } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c deleted file mode 100644 index 9be6c1e69d68..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <video/platform_lcd.h> -#include <linux/backlight.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx51.h" -#include "hardware.h" -#include "iomux-mx51.h" - -static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = { - /* LED */ - MX51_PAD_NANDF_D10__GPIO3_30, - /* SWITCH */ - NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - /* UART 3 */ - MX51_PAD_UART3_RXD__UART3_RXD, - MX51_PAD_UART3_TXD__UART3_TXD, - MX51_PAD_KEY_COL4__UART3_RTS, - MX51_PAD_KEY_COL5__UART3_CTS, - /* SD */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - /* SD1 CD */ - NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - /* SSI */ - MX51_PAD_AUD3_BB_TXD__AUD3_TXD, - MX51_PAD_AUD3_BB_RXD__AUD3_RXD, - MX51_PAD_AUD3_BB_CK__AUD3_TXC, - MX51_PAD_AUD3_BB_FS__AUD3_TXFS, - /* LCD Backlight */ - MX51_PAD_DI1_D1_CS__GPIO3_4, - /* LCD RST */ - MX51_PAD_CSI1_D9__GPIO3_13, -}; - -#define GPIO_LED1 IMX_GPIO_NR(3, 30) -#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31) -#define GPIO_LCDRST IMX_GPIO_NR(3, 13) -#define GPIO_LCDBL IMX_GPIO_NR(3, 4) - -static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDRST, 1); - else - gpio_direction_output(GPIO_LCDRST, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = { - .set_power = eukrea_mbimxsd51_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd51_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd51_lcd_power_data, -}; - -static void eukrea_mbimxsd51_bl_set_intensity(int intensity) -{ - if (intensity) - gpio_direction_output(GPIO_LCDBL, 1); - else - gpio_direction_output(GPIO_LCDBL, 0); -} - -static struct generic_bl_info eukrea_mbimxsd51_bl_info = { - .name = "eukrea_mbimxsd51-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = eukrea_mbimxsd51_bl_set_intensity, -}; - -static struct platform_device eukrea_mbimxsd51_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = &eukrea_mbimxsd51_bl_info, - }, -}; - -static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimxsd51_led_info __initconst = { - .leds = eukrea_mbimxsd51_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd51_leds), -}; - -static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data - eukrea_mbimxsd51_button_data __initconst = { - .buttons = eukrea_mbimxsd51_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons), -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -static int screen_type; - -static int __init eukrea_mbimxsd51_screen_type(char *options) -{ - if (!strcmp(options, "dvi")) - screen_type = 1; - else if (!strcmp(options, "tft")) - screen_type = 0; - - return 0; -} -__setup("screen_type=", eukrea_mbimxsd51_screen_type); - -/* - * system init for baseboard usage. Will be called by cpuimx51sd init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd51_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads, - ARRAY_SIZE(eukrea_mbimxsd51_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - - imx51_add_imx_uart(1, NULL); - imx51_add_imx_uart(2, &uart_pdata); - - imx51_add_sdhci_esdhc_imx(0, NULL); - - imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDRST, "LCDRST"); - gpio_direction_output(GPIO_LCDRST, 0); - gpio_request(GPIO_LCDBL, "LCDBL"); - gpio_direction_output(GPIO_LCDBL, 0); - if (!screen_type) { - platform_device_register(&eukrea_mbimxsd51_bl_dev); - platform_device_register(&eukrea_mbimxsd51_lcd_powerdev); - } else { - gpio_free(GPIO_LCDRST); - gpio_free(GPIO_LCDBL); - } - - i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices)); - - gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd51_button_data); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 3e1ec5ffe630..42a65e067443 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -38,7 +38,6 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = imx25_timer_init, .init_machine = imx25_dt_init, .dt_compat = imx25_dt_board_compat, diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 4e235ecb4021..17bd4058133d 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -43,7 +43,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = imx27_timer_init, .init_machine = imx27_dt_init, .dt_compat = imx27_dt_board_compat, diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index e1e70ef7bc2d..581f4d6c9b8a 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -39,7 +39,6 @@ DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = imx31_dt_timer_init, .init_machine = imx31_dt_init, .dt_compat = imx31_dt_board_compat, diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c index 9d48e0065a63..a62854c59240 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/imx35-dt.c @@ -43,7 +43,6 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = imx35_irq_init, - .handle_irq = imx35_handle_irq, .init_machine = imx35_dt_init, .dt_compat = imx35_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 0230d78d1413..b8cd968faa52 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -38,7 +38,6 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 067580b2969b..ebbb5ab63529 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -142,7 +142,6 @@ MACHINE_START(APF9328, "Armadeus APF9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = apf9328_timer_init, .init_machine = apf9328_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 58b864a3fc20..39406b7e3228 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -562,7 +562,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = armadillo5x0_timer_init, .init_machine = armadillo5x0_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 2d00476f7d2c..c97d7cb39135 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -57,7 +57,6 @@ MACHINE_START(BUG, "BugLabs BUGBase") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = bug_timer_init, .init_machine = bug_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index ea50870bda80..75b7b6aa2720 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -314,7 +314,6 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = eukrea_cpuimx27_timer_init, .init_machine = eukrea_cpuimx27_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 65e4c53e1554..1ffa27169045 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -199,7 +199,6 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = eukrea_cpuimx35_timer_init, .init_machine = eukrea_cpuimx35_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c deleted file mode 100644 index 1fba2b8e983f..000000000000 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * - * Copyright (C) 2010 Eric Bénard <eric@eukrea.com> - * - * based on board-mx51_babbage.c which is - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/i2c-gpio.h> -#include <linux/spi/spi.h> -#include <linux/can/platform/mcp251x.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx51.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx51.h" - -#define USBH1_RST IMX_GPIO_NR(2, 28) -#define ETH_RST IMX_GPIO_NR(2, 31) -#define TSC2007_IRQGPIO_REV2 IMX_GPIO_NR(3, 12) -#define TSC2007_IRQGPIO_REV3 IMX_GPIO_NR(4, 0) -#define CAN_IRQGPIO IMX_GPIO_NR(1, 1) -#define CAN_RST IMX_GPIO_NR(4, 15) -#define CAN_NCS IMX_GPIO_NR(4, 24) -#define CAN_RXOBF_REV2 IMX_GPIO_NR(1, 4) -#define CAN_RXOBF_REV3 IMX_GPIO_NR(3, 12) -#define CAN_RX1BF IMX_GPIO_NR(1, 6) -#define CAN_TXORTS IMX_GPIO_NR(1, 7) -#define CAN_TX1RTS IMX_GPIO_NR(1, 8) -#define CAN_TX2RTS IMX_GPIO_NR(1, 9) -#define I2C_SCL IMX_GPIO_NR(4, 16) -#define I2C_SDA IMX_GPIO_NR(4, 17) - -/* USB_CTRL_1 */ -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) - -#define MX51_USB_PLLDIV_12_MHZ 0x00 -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 -#define MX51_USB_PLL_DIV_24_MHZ 0x02 - -static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - MX51_PAD_USBH1_STP__USBH1_STP, - MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */ - - /* FEC */ - MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */ - - /* HSI2C */ - MX51_PAD_I2C1_CLK__GPIO4_16, - MX51_PAD_I2C1_DAT__GPIO4_17, - - /* I2C1 */ - MX51_PAD_SD2_CMD__I2C1_SCL, - MX51_PAD_SD2_CLK__I2C1_SDA, - - /* CAN */ - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */ - MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */ - MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */ - MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */ - MX51_PAD_GPIO1_6__GPIO1_6, - MX51_PAD_GPIO1_7__GPIO1_7, - MX51_PAD_GPIO1_8__GPIO1_8, - MX51_PAD_GPIO1_9__GPIO1_9, - - /* Touchscreen */ - /* IRQ */ - NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static int tsc2007_get_pendown_state(struct device *dev) -{ - if (mx51_revision() < IMX_CHIP_REVISION_3_0) - return !gpio_get_value(TSC2007_IRQGPIO_REV2); - else - return !gpio_get_value(TSC2007_IRQGPIO_REV3); -} - -static struct tsc2007_platform_data tsc2007_info = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = tsc2007_get_pendown_state, -}; - -static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("tsc2007", 0x49), - .platform_data = &tsc2007_info, - }, -}; - -static const struct mxc_nand_platform_data - eukrea_cpuimx51sd_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -/* This function is board specific as the bit mask for the plldiv will also -be different for other Freescale SoCs, thus a common bitmask is not -possible and cannot get place in /plat-mxc/ehci.c.*/ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* The clock for the USBH1 ULPI port will come from the PHY. */ - v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, - usbother_base + MX51_USB_CTRL_1_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_ITC_NO_THRESHOLD); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -static const struct mxc_usbh_platform_data usbh1_config __initconst = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx51sd_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode); - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = I2C_SDA, - .sda_is_open_drain = 0, - .scl_pin = I2C_SCL, - .scl_is_open_drain = 0, - .udelay = 2, -}; - -static struct platform_device hsi2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -static struct mcp251x_platform_data mcp251x_info = { - .oscillator_frequency = 24E6, -}; - -static struct spi_board_info cpuimx51sd_spi_device[] = { - { - .modalias = "mcp2515", - .max_speed_hz = 10000000, - .bus_num = 0, - .mode = SPI_MODE_0, - .chip_select = 0, - .platform_data = &mcp251x_info, - /* irq number is run-time assigned */ - }, -}; - -static int cpuimx51sd_spi1_cs[] = { - CAN_NCS, -}; - -static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = { - .chipselect = cpuimx51sd_spi1_cs, - .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs), -}; - -static struct platform_device *rev2_platform_devices[] __initdata = { - &hsi2c_gpio_device, -}; - -static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = { - .bitrate = 100000, -}; - -static void __init eukrea_cpuimx51sd_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, - ARRAY_SIZE(eukrea_cpuimx51sd_pads)); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); - imx51_add_imx2_wdt(0); - - gpio_request(ETH_RST, "eth_rst"); - gpio_set_value(ETH_RST, 1); - imx51_add_fec(NULL); - - gpio_request(CAN_IRQGPIO, "can_irq"); - gpio_direction_input(CAN_IRQGPIO); - gpio_free(CAN_IRQGPIO); - gpio_request(CAN_NCS, "can_ncs"); - gpio_direction_output(CAN_NCS, 1); - gpio_free(CAN_NCS); - gpio_request(CAN_RST, "can_rst"); - gpio_direction_output(CAN_RST, 0); - msleep(20); - gpio_set_value(CAN_RST, 1); - imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata); - cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO); - spi_register_board_info(cpuimx51sd_spi_device, - ARRAY_SIZE(cpuimx51sd_spi_device)); - - if (mx51_revision() < IMX_CHIP_REVISION_3_0) { - eukrea_cpuimx51sd_i2c_devices[1].irq = - gpio_to_irq(TSC2007_IRQGPIO_REV2), - platform_add_devices(rev2_platform_devices, - ARRAY_SIZE(rev2_platform_devices)); - gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq"); - gpio_direction_input(TSC2007_IRQGPIO_REV2); - gpio_free(TSC2007_IRQGPIO_REV2); - } else { - eukrea_cpuimx51sd_i2c_devices[1].irq = - gpio_to_irq(TSC2007_IRQGPIO_REV3), - imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data); - gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq"); - gpio_direction_input(TSC2007_IRQGPIO_REV3); - gpio_free(TSC2007_IRQGPIO_REV3); - } - - i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices)); - - if (otg_mode_host) - imx51_add_mxc_ehci_otg(&dr_utmi_config); - else { - initialize_otg_port(NULL); - imx51_add_fsl_usb2_udc(&usb_pdata); - } - - gpio_request(USBH1_RST, "usb_rst"); - gpio_direction_output(USBH1_RST, 0); - msleep(20); - gpio_set_value(USBH1_RST, 1); - imx51_add_mxc_ehci_hs(1, &usbh1_config); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD - eukrea_mbimxsd51_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx51sd_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") - /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_time = eukrea_cpuimx51sd_timer_init, - .init_machine = eukrea_cpuimx51sd_init, - .init_late = imx51_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 4bf454424249..e978dda1434c 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -165,7 +165,6 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = eukrea_cpuimx25_timer_init, .init_machine = eukrea_cpuimx25_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 97f9c6297fcf..b61bd8ed5568 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -604,7 +604,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = visstrim_m10_timer_init, .init_machine = visstrim_m10_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 1a851aea6832..bb3ca0429680 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -71,7 +71,6 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27ipcam_timer_init, .init_machine = mx27ipcam_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 3da2e3e44ce9..9992089d3ad1 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -77,7 +77,6 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27lite_timer_init, .init_machine = mx27lite_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c index 77b77a92bb5d..b899c0b59afd 100644 --- a/arch/arm/mach-imx/mach-imx50.c +++ b/arch/arm/mach-imx/mach-imx50.c @@ -31,7 +31,6 @@ static const char *imx50_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)") .map_io = mx53_map_io, .init_irq = mx53_init_irq, - .handle_irq = imx50_handle_irq, .init_machine = imx50_dt_init, .dt_compat = imx50_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 65850908a4b4..2bad387956c0 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -40,7 +40,6 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c new file mode 100644 index 000000000000..02fccf6033ac --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -0,0 +1,51 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +static void __init imx6sx_init_machine(void) +{ + struct device *parent; + + mxc_arch_reset_init_dt(); + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + + imx_anatop_init(); +} + +static void __init imx6sx_init_irq(void) +{ + imx_init_revision_from_anatop(); + imx_init_l2cache(); + imx_src_init(); + imx_gpc_init(); + irqchip_init(); +} + +static const char *imx6sx_dt_compat[] __initconst = { + "fsl,imx6sx", + NULL, +}; + +DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = imx6sx_init_irq, + .init_machine = imx6sx_init_machine, + .dt_compat = imx6sx_dt_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index c7bc41d6b468..31df4361996f 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -289,7 +289,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = kzm_timer_init, .init_machine = kzm_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 9f883e4d6fc9..77fda3de4290 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -138,7 +138,6 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = mx1ads_timer_init, .init_machine = mx1ads_init, .restart = mxc_restart, @@ -149,7 +148,6 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = mx1ads_timer_init, .init_machine = mx1ads_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index a06aa4dc37fc..703ce31d7379 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -17,51 +17,46 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> +#include <linux/basic_mmio_gpio.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> #include "common.h" #include "devices-imx21.h" #include "hardware.h" #include "iomux-mx21.h" -/* - * Memory-mapped I/O on MX21ADS base board - */ -#define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE 0xc00000 - -#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ - (MX21ADS_MMIO_BASE_ADDR + (offset)) +#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000) +#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000) +#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000) +#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000) -#define MX21ADS_CS8900A_MMIO_SIZE 0x200000 -#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) -#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) -#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) +#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25) +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) +#define MX21ADS_MMGPIO_BASE (6 * 32) /* MX21ADS_IO_REG bit definitions */ -#define MX21ADS_IO_SD_WP 0x0001 /* read */ -#define MX21ADS_IO_TP6 0x0001 /* write */ -#define MX21ADS_IO_SW_SEL 0x0002 /* read */ -#define MX21ADS_IO_TP7 0x0002 /* write */ -#define MX21ADS_IO_RESET_E_UART 0x0004 -#define MX21ADS_IO_RESET_BASE 0x0008 -#define MX21ADS_IO_CSI_CTL2 0x0010 -#define MX21ADS_IO_CSI_CTL1 0x0020 -#define MX21ADS_IO_CSI_CTL0 0x0040 -#define MX21ADS_IO_UART1_EN 0x0080 -#define MX21ADS_IO_UART4_EN 0x0100 -#define MX21ADS_IO_LCDON 0x0200 -#define MX21ADS_IO_IRDA_EN 0x0400 -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 -#define MX21ADS_IO_IRDA_MD0_B 0x1000 -#define MX21ADS_IO_IRDA_MD1 0x2000 -#define MX21ADS_IO_LED4_ON 0x4000 -#define MX21ADS_IO_LED3_ON 0x8000 +#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0) +#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP) +#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1) +#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL) +#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2) +#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3) +#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4) +#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5) +#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6) +#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7) +#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8) +#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9) +#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10) +#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11) +#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12) +#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13) +#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14) +#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15) static const int mx21ads_pins[] __initconst = { @@ -143,11 +138,8 @@ static struct physmap_flash_data mx21ads_flash_data = { .width = 4, }; -static struct resource mx21ads_flash_resource = { - .start = MX21_CS0_BASE_ADDR, - .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource mx21ads_flash_resource = + DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M); static struct platform_device mx21ads_nor_mtd_device = { .name = "physmap-flash", @@ -160,7 +152,7 @@ static struct platform_device mx21ads_nor_mtd_device = { }; static struct resource mx21ads_cs8900_resources[] __initdata = { - DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), + DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K), /* irq number is run-time assigned */ DEFINE_RES_IRQ(-1), }; @@ -179,24 +171,50 @@ static const struct imxuart_platform_data uart_pdata_rts __initconst = { static const struct imxuart_platform_data uart_pdata_norts __initconst = { }; -static int mx21ads_fb_init(struct platform_device *pdev) -{ - u16 tmp; +static struct resource mx21ads_mmgpio_resource = + DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); - tmp = __raw_readw(MX21ADS_IO_REG); - tmp |= MX21ADS_IO_LCDON; - __raw_writew(tmp, MX21ADS_IO_REG); - return 0; -} +static struct bgpio_pdata mx21ads_mmgpio_pdata = { + .base = MX21ADS_MMGPIO_BASE, + .ngpio = 16, +}; -static void mx21ads_fb_exit(struct platform_device *pdev) -{ - u16 tmp; +static struct platform_device mx21ads_mmgpio = { + .name = "basic-mmio-gpio", + .id = PLATFORM_DEVID_AUTO, + .resource = &mx21ads_mmgpio_resource, + .num_resources = 1, + .dev = { + .platform_data = &mx21ads_mmgpio_pdata, + }, +}; - tmp = __raw_readw(MX21ADS_IO_REG); - tmp &= ~MX21ADS_IO_LCDON; - __raw_writew(tmp, MX21ADS_IO_REG); -} +static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer = + REGULATOR_SUPPLY("lcd", "imx-fb.0"); + +static struct regulator_init_data mx21ads_lcd_regulator_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &mx21ads_lcd_regulator_consumer, + .num_consumer_supplies = 1, +}; + +static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { + .supply_name = "LCD", + .microvolts = 3300000, + .gpio = MX21ADS_IO_LCDON, + .enable_high = 1, + .init_data = &mx21ads_lcd_regulator_init_data, +}; + +static struct platform_device mx21ads_lcd_regulator = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &mx21ads_lcd_regulator_pdata, + }, +}; /* * Connected is a portrait Sharp-QVGA display @@ -229,26 +247,30 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = { .pwmr = 0x00a903ff, .lscr1 = 0x00120300, .dmacr = 0x00020008, - - .init = mx21ads_fb_init, - .exit = mx21ads_fb_exit, }; static int mx21ads_sdhc_get_ro(struct device *dev) { - return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; + return gpio_get_value(MX21ADS_IO_SD_WP); } static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq, - IRQF_TRIGGER_FALLING, "mmc-detect", data); + int ret; + + ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro"); + if (ret) + return ret; + + return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); } static void mx21ads_sdhc_exit(struct device *dev, void *data) { - free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data); + free_irq(gpio_to_irq(MX21ADS_MMC_CD), data); + gpio_free(MX21ADS_IO_SD_WP); } static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { @@ -264,29 +286,9 @@ mx21ads_nand_board_info __initconst = { .hw_ecc = 1, }; -static struct map_desc mx21ads_io_desc[] __initdata = { - /* - * Memory-mapped I/O on MX21ADS Base board: - * - CS8900A Ethernet controller - * - ST16C2552CJ UART - * - CPU and Base board version - * - Base board I/O register - */ - { - .virtual = MX21ADS_MMIO_BASE_ADDR, - .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR), - .length = MX21ADS_MMIO_SIZE, - .type = MT_DEVICE, - }, -}; - -static void __init mx21ads_map_io(void) -{ - mx21_map_io(); - iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); -} - static struct platform_device *platform_devices[] __initdata = { + &mx21ads_mmgpio, + &mx21ads_lcd_regulator, &mx21ads_nor_mtd_device, }; @@ -300,12 +302,13 @@ static void __init mx21ads_board_init(void) imx21_add_imx_uart0(&uart_pdata_rts); imx21_add_imx_uart2(&uart_pdata_norts); imx21_add_imx_uart3(&uart_pdata_rts); - imx21_add_imx_fb(&mx21ads_fb_data); imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx21_add_imx_fb(&mx21ads_fb_data); + mx21ads_cs8900_resources[1].start = gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); mx21ads_cs8900_resources[1].end = @@ -321,10 +324,9 @@ static void __init mx21ads_timer_init(void) MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, - .map_io = mx21ads_map_io, + .map_io = mx21_map_io, .init_early = imx21_init_early, .init_irq = mx21_init_irq, - .handle_irq = imx21_handle_irq, .init_time = mx21ads_timer_init, .init_machine = mx21ads_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 13490c203050..ea1fa199c148 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -263,7 +263,6 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = mx25pdk_timer_init, .init_machine = mx25pdk_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 25b3e4c9bc0a..435a5428a678 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -544,7 +544,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27pdk_timer_init, .init_machine = mx27pdk_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index a7a4a9c67615..2f834ce8f39c 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -391,7 +391,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .map_io = mx27ads_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27ads_timer_init, .init_machine = mx27ads_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 50044a21b388..4217871a9653 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -775,7 +775,6 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31_3ds_timer_init, .init_machine = mx31_3ds_init, .reserve = mx31_3ds_reserve, diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index daf8889125cc..d08c37c696f6 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -582,7 +582,6 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .map_io = mx31ads_map_io, .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31ads_timer_init, .init_machine = mx31ads_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 832b1e2f964e..eee042fa2768 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -308,7 +308,6 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31lilly_timer_init, .init_machine = mx31lilly_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index bea07299b61a..fa15d0b6118d 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -291,7 +291,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .map_io = mx31lite_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31lite_timer_init, .init_machine = mx31lite_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 8f45afe785f8..08730f238449 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -600,7 +600,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31moboard_timer_init, .init_machine = mx31moboard_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index a42f4f07051f..4e8b184d773b 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -615,7 +615,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = mx35pdk_timer_init, .init_machine = mx35_3ds_init, .reserve = mx35_3ds_reserve, diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c deleted file mode 100644 index f3d264a636fa..000000000000 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx51.h" -#include "hardware.h" -#include "iomux-mx51.h" - -#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) -#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27) -#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5) -#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14) -#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21) -#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24) -#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25) -#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6) -#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5) - -/* USB_CTRL_1 */ -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) - -#define MX51_USB_PLLDIV_12_MHZ 0x00 -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 -#define MX51_USB_PLL_DIV_24_MHZ 0x02 - -static struct gpio_keys_button babbage_buttons[] = { - { - .gpio = BABBAGE_POWER_KEY, - .code = BTN_0, - .desc = "PWR", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data imx_button_data __initconst = { - .buttons = babbage_buttons, - .nbuttons = ARRAY_SIZE(babbage_buttons), -}; - -static iomux_v3_cfg_t mx51babbage_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - - /* UART3 */ - MX51_PAD_EIM_D25__UART3_RXD, - MX51_PAD_EIM_D26__UART3_TXD, - MX51_PAD_EIM_D27__UART3_RTS, - MX51_PAD_EIM_D24__UART3_CTS, - - /* I2C1 */ - MX51_PAD_EIM_D16__I2C1_SDA, - MX51_PAD_EIM_D19__I2C1_SCL, - - /* I2C2 */ - MX51_PAD_KEY_COL4__I2C2_SCL, - MX51_PAD_KEY_COL5__I2C2_SDA, - - /* HSI2C */ - MX51_PAD_I2C1_CLK__I2C1_CLK, - MX51_PAD_I2C1_DAT__I2C1_DAT, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - - /* USB HUB reset line*/ - MX51_PAD_GPIO1_7__GPIO1_7, - - /* USB PHY reset line */ - MX51_PAD_EIM_D21__GPIO2_5, - - /* FEC */ - MX51_PAD_EIM_EB2__FEC_MDIO, - MX51_PAD_EIM_EB3__FEC_RDATA1, - MX51_PAD_EIM_CS2__FEC_RDATA2, - MX51_PAD_EIM_CS3__FEC_RDATA3, - MX51_PAD_EIM_CS4__FEC_RX_ER, - MX51_PAD_EIM_CS5__FEC_CRS, - MX51_PAD_NANDF_RB2__FEC_COL, - MX51_PAD_NANDF_RB3__FEC_RX_CLK, - MX51_PAD_NANDF_D9__FEC_RDATA0, - MX51_PAD_NANDF_D8__FEC_TDATA0, - MX51_PAD_NANDF_CS2__FEC_TX_ER, - MX51_PAD_NANDF_CS3__FEC_MDC, - MX51_PAD_NANDF_CS4__FEC_TDATA1, - MX51_PAD_NANDF_CS5__FEC_TDATA2, - MX51_PAD_NANDF_CS6__FEC_TDATA3, - MX51_PAD_NANDF_CS7__FEC_TX_EN, - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, - - /* FEC PHY reset line */ - MX51_PAD_EIM_A20__GPIO2_14, - - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - /* CD/WP from controller */ - MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_GPIO1_1__SD1_WP, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - /* CD/WP gpio */ - MX51_PAD_GPIO1_6__GPIO1_6, - MX51_PAD_GPIO1_5__GPIO1_5, - - /* eCSPI1 */ - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - - /* Audio */ - MX51_PAD_AUD3_BB_TXD__AUD3_TXD, - MX51_PAD_AUD3_BB_RXD__AUD3_RXD, - MX51_PAD_AUD3_BB_CK__AUD3_TXC, - MX51_PAD_AUD3_BB_FS__AUD3_TXFS, -}; - -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data babbage_i2c_data __initconst = { - .bitrate = 100000, -}; - -static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = { - .bitrate = 400000, -}; - -static struct gpio mx51_babbage_usbh1_gpios[] = { - { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" }, - { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" }, -}; - -static int gpio_usbh1_active(void) -{ - iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27; - int ret; - - /* Set USBH1_STP to GPIO and toggle it */ - mxc_iomux_v3_setup_pad(usbh1stp_gpio); - ret = gpio_request_array(mx51_babbage_usbh1_gpios, - ARRAY_SIZE(mx51_babbage_usbh1_gpios)); - - if (ret) { - pr_debug("failed to get USBH1 pins: %d\n", ret); - return ret; - } - - msleep(100); - gpio_set_value(BABBAGE_USBH1_STP, 1); - gpio_set_value(BABBAGE_USB_PHY_RESET, 1); - gpio_free_array(mx51_babbage_usbh1_gpios, - ARRAY_SIZE(mx51_babbage_usbh1_gpios)); - return 0; -} - -static inline void babbage_usbhub_reset(void) -{ - int ret; - - /* Reset USB hub */ - ret = gpio_request_one(BABBAGE_USB_HUB_RESET, - GPIOF_OUT_INIT_LOW, "GPIO1_7"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret); - return; - } - - msleep(2); - /* Deassert reset */ - gpio_set_value(BABBAGE_USB_HUB_RESET, 1); -} - -static inline void babbage_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request_one(BABBAGE_FEC_PHY_RESET, - GPIOF_OUT_INIT_LOW, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - msleep(1); - gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); -} - -/* This function is board specific as the bit mask for the plldiv will also -be different for other Freescale SoCs, thus a common bitmask is not -possible and cannot get place in /plat-mxc/ehci.c.*/ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* The clock for the USBH1 ULPI port will come externally from the PHY. */ - v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_ITC_NO_THRESHOLD); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -static const struct mxc_usbh_platform_data usbh1_config __initconst = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init babbage_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", babbage_otg_mode); - -static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = { - { - .modalias = "mtd_dataflash", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - .platform_data = NULL, - }, -}; - -static int mx51_babbage_spi_cs[] = { - BABBAGE_ECSPI1_CS0, - BABBAGE_ECSPI1_CS1, -}; - -static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { - .chipselect = mx51_babbage_spi_cs, - .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), -}; - -static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = { - .cd_gpio = BABBAGE_SD2_CD, - .wp_gpio = BABBAGE_SD2_WP, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_GPIO, -}; - -void __init imx51_babbage_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, - ARRAY_SIZE(mx51babbage_pads)); -} - -/* - * Board specific initialization. - */ -static void __init mx51_babbage_init(void) -{ - iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; - iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); - - imx51_soc_init(); - - imx51_babbage_common_init(); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, NULL); - imx51_add_imx_uart(2, &uart_pdata); - - babbage_fec_reset(); - imx51_add_fec(NULL); - - /* Set the PAD settings for the pwr key. */ - mxc_iomux_v3_setup_pad(power_key); - imx_add_gpio_keys(&imx_button_data); - - imx51_add_imx_i2c(0, &babbage_i2c_data); - imx51_add_imx_i2c(1, &babbage_i2c_data); - imx51_add_hsi2c(&babbage_hsi2c_data); - - if (otg_mode_host) - imx51_add_mxc_ehci_otg(&dr_utmi_config); - else { - initialize_otg_port(NULL); - imx51_add_fsl_usb2_udc(&usb_pdata); - } - - gpio_usbh1_active(); - imx51_add_mxc_ehci_hs(1, &usbh1_config); - /* setback USBH1_STP to be function */ - mxc_iomux_v3_setup_pad(usbh1stp); - babbage_usbhub_reset(); - - imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data); - imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data); - - spi_register_board_info(mx51_babbage_spi_board_info, - ARRAY_SIZE(mx51_babbage_spi_board_info)); - imx51_add_ecspi(0, &mx51_babbage_spi_pdata); - imx51_add_imx2_wdt(0); -} - -static void __init mx51_babbage_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") - /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_time = mx51_babbage_timer_init, - .init_machine = mx51_babbage_init, - .init_late = imx51_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index c91894003da9..0b5d1ca31b9f 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -267,7 +267,6 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mxt_td60_timer_init, .init_machine = mxt_td60_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bf3ac51d5aca..12212378c672 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -245,8 +245,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, int ret; ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "imx-mmc-detect", data); + IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) printk(KERN_ERR "pca100: Failed to request irq for sd/mmc detection\n"); @@ -421,7 +420,6 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_machine = pca100_init, .init_time = pca100_timer_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 639a3dfb0092..81b8affb9448 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -703,7 +703,6 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = pcm037_timer_init, .init_machine = pcm037_init, .init_late = pcm037_init_late, diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 592ddbe031ac..6c56fb5553c7 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -351,7 +351,6 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = pcm038_timer_init, .init_machine = pcm038_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index ac504b67326b..c62b5d261345 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -400,7 +400,6 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = pcm043_timer_init, .init_machine = pcm043_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 22af27ed457e..a213e7b9cb1c 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -266,7 +266,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = qong_timer_init, .init_machine = qong_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index b0fa10dd79fe..1f6bc3f7ae14 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -137,7 +137,6 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = scb9328_timer_init, .init_machine = scb9328_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index 2d8aef5a6efa..c44602758120 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -20,19 +20,14 @@ static void __init vf610_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init vf610_init_irq(void) -{ - l2x0_of_init(0, ~0UL); - irqchip_init(); -} - static const char *vf610_dt_compat[] __initconst = { "fsl,vf610", NULL, }; DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") - .init_irq = vf610_init_irq, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_machine = vf610_init_machine, .dt_compat = vf610_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 8825d1217d18..872b3c6ba408 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -310,7 +310,6 @@ MACHINE_START(VPR200, "VPR200") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = vpr200_timer_init, .init_machine = vpr200_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index b08ab3ad4a6d..75d6a37e1ae4 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -36,6 +36,7 @@ #define MXC_CPU_MX53 53 #define MXC_CPU_IMX6SL 0x60 #define MXC_CPU_IMX6DL 0x61 +#define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 #define IMX_CHIP_REVISION_1_0 0x10 @@ -163,6 +164,11 @@ static inline bool cpu_is_imx6dl(void) return __mxc_cpu_type == MXC_CPU_IMX6DL; } +static inline bool cpu_is_imx6sx(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SX; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 20048ff05739..fe123b079c05 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -334,28 +334,10 @@ ENDPROC(imx6_suspend) * turned into relative ones. */ -#ifdef CONFIG_CACHE_L2X0 - .macro pl310_resume - adr r0, l2x0_saved_regs_offset - ldr r2, [r0] - add r2, r2, r0 - ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 - ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value - str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl - mov r1, #0x1 - str r1, [r0, #L2X0_CTRL] @ re-enable L2 - .endm - -l2x0_saved_regs_offset: - .word l2x0_saved_regs - . - -#else - .macro pl310_resume - .endm -#endif - ENTRY(v7_cpu_resume) bl v7_invalidate_l1 - pl310_resume +#ifdef CONFIG_CACHE_L2X0 + bl l2c310_early_resume +#endif b cpu_resume ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 5e3027d3692f..3b0733edb68c 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -124,7 +124,7 @@ void __init imx_init_l2cache(void) } /* Configure the L2 PREFETCH and POWER registers */ - val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); + val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); val |= 0x70800000; /* * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 @@ -137,14 +137,12 @@ void __init imx_init_l2cache(void) */ if (cpu_is_imx6q()) val &= ~(1 << 30 | 1 << 23); - writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); - val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; - writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); + writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); iounmap(l2x0_base); of_node_put(np); out: - l2x0_of_init(0, ~0UL); + l2x0_of_init(0, ~0); } #endif diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 65222ea0df6d..bed081e58262 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -28,6 +28,9 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/sched_clock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -328,3 +331,15 @@ void __init mxc_timer_init(void __iomem *base, int irq) /* Make irqs happen */ setup_irq(irq, &mxc_timer_irq); } + +void __init mxc_timer_init_dt(struct device_node *np) +{ + void __iomem *base; + int irq; + + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + + mxc_timer_init(base, irq); +} diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 8183178d5aa3..7828af4b2022 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -125,7 +125,7 @@ static __init void tzic_init_gc(int idx, unsigned int irq_start) irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) +static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) { u32 stat; int i, irqofs, handled; @@ -189,6 +189,8 @@ void __init tzic_init_irq(void __iomem *irqbase) for (i = 0; i < 4; i++, irq_base += 32) tzic_init_gc(i, irq_base); + set_handle_irq(tzic_handle_irq); + #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(FIQ_START); diff --git a/arch/arm/mach-iop13xx/include/mach/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h index 054e7acb5bfa..e8d24d32121a 100644 --- a/arch/arm/mach-iop13xx/include/mach/irqs.h +++ b/arch/arm/mach-iop13xx/include/mach/irqs.h @@ -191,6 +191,4 @@ static inline u32 read_intpnd_3(void) #define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1) #endif -#define NR_IRQS NR_IOP13XX_IRQS - #endif /* _IOP13XX_IRQ_H_ */ diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h index f1c00d6d560b..15bc9bb78a6b 100644 --- a/arch/arm/mach-iop13xx/include/mach/time.h +++ b/arch/arm/mach-iop13xx/include/mach/time.h @@ -1,5 +1,8 @@ #ifndef _IOP13XX_TIME_H_ #define _IOP13XX_TIME_H_ + +#include <mach/irqs.h> + #define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0 #define IOP_TMR_EN 0x02 diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 02a8228ac2d3..9cd07d396093 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -93,4 +93,5 @@ MACHINE_START(IQ81340MC, "Intel IQ81340MC") .init_time = iq81340mc_timer_init, .init_machine = iq81340mc_init, .restart = iop13xx_restart, + .nr_irqs = NR_IOP13XX_IRQS, MACHINE_END diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index 1b80f10722b3..b3ec11cb707e 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -95,4 +95,5 @@ MACHINE_START(IQ81340SC, "Intel IQ81340SC") .init_time = iq81340sc_timer_init, .init_machine = iq81340sc_init, .restart = iop13xx_restart, + .nr_irqs = NR_IOP13XX_IRQS, MACHINE_END diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c index 560d5b2dec22..e7730cf9c15d 100644 --- a/arch/arm/mach-iop13xx/msi.c +++ b/arch/arm/mach-iop13xx/msi.c @@ -23,10 +23,7 @@ #include <linux/msi.h> #include <asm/mach/irq.h> #include <asm/irq.h> - - -#define IOP13XX_NUM_MSI_IRQS 128 -static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS); +#include <mach/irqs.h> /* IMIPR0 CP6 R8 Page 1 */ @@ -121,41 +118,6 @@ void __init iop13xx_msi_init(void) irq_set_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler); } -/* - * Dynamic irq allocate and deallocation - */ -int create_irq(void) -{ - int irq, pos; - -again: - pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS); - irq = IRQ_IOP13XX_MSI_0 + pos; - if (irq > NR_IRQS) - return -ENOSPC; - /* test_and_set_bit operates on 32-bits at a time */ - if (test_and_set_bit(pos, msi_irq_in_use)) - goto again; - - dynamic_irq_init(irq); - - return irq; -} - -void destroy_irq(unsigned int irq) -{ - int pos = irq - IRQ_IOP13XX_MSI_0; - - dynamic_irq_cleanup(irq); - - clear_bit(pos, msi_irq_in_use); -} - -void arch_teardown_msi_irq(unsigned int irq) -{ - destroy_irq(irq); -} - static void iop13xx_msi_nop(struct irq_data *d) { return; @@ -172,12 +134,17 @@ static struct irq_chip iop13xx_msi_chip = { int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) { - int id, irq = create_irq(); + int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1); struct msi_msg msg; if (irq < 0) return irq; + if (irq >= NR_IOP13XX_IRQS) { + irq_free_desc(irq); + return -ENOSPC; + } + irq_set_msi_desc(irq, desc); msg.address_hi = 0x0; @@ -191,3 +158,8 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) return 0; } + +void arch_teardown_msi_irq(unsigned int irq) +{ + irq_free_desc(irq); +} diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 96e6c7a6793b..bca96f433495 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -27,6 +27,7 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <asm/hardware/iop_adma.h> +#include <mach/irqs.h> #define IOP13XX_UART_XTAL 33334000 #define IOP13XX_SETUP_DEBUG 0 diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c index 6fdad7a0425a..db511ec2b1df 100644 --- a/arch/arm/mach-iop13xx/tpmi.c +++ b/arch/arm/mach-iop13xx/tpmi.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <asm/irq.h> #include <asm/sizes.h> +#include <mach/irqs.h> /* assumes CONTROLLER_ONLY# is never asserted in the ESSR register */ #define IOP13XX_TPMI_MMR(dev) IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12)) diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index e0b9e1b9cf30..7f352de26099 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -14,60 +14,100 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <linux/of_address.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/smp_plat.h> +#include <asm/memory.h> -#include "keystone.h" +#include "memory.h" -#define PLL_RESET_WRITE_KEY_MASK 0xffff0000 -#define PLL_RESET_WRITE_KEY 0x5a69 -#define PLL_RESET BIT(16) +#include "keystone.h" -static void __iomem *keystone_rstctrl; +static struct notifier_block platform_nb; +static unsigned long keystone_dma_pfn_offset __read_mostly; -static void __init keystone_init(void) +static int keystone_platform_notifier(struct notifier_block *nb, + unsigned long event, void *data) { - struct device_node *node; + struct device *dev = data; - node = of_find_compatible_node(NULL, NULL, "ti,keystone-reset"); - if (WARN_ON(!node)) - pr_warn("ti,keystone-reset node undefined\n"); + if (event != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; - keystone_rstctrl = of_iomap(node, 0); - if (WARN_ON(!keystone_rstctrl)) - pr_warn("ti,keystone-reset iomap error\n"); + if (!dev) + return NOTIFY_BAD; + if (!dev->of_node) { + dev->dma_pfn_offset = keystone_dma_pfn_offset; + dev_err(dev, "set dma_pfn_offset%08lx\n", + dev->dma_pfn_offset); + } + return NOTIFY_OK; +} + +static void __init keystone_init(void) +{ keystone_pm_runtime_init(); + if (platform_nb.notifier_call) + bus_register_notifier(&platform_bus_type, &platform_nb); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char *keystone_match[] __initconst = { - "ti,keystone", - NULL, -}; +static phys_addr_t keystone_virt_to_idmap(unsigned long x) +{ + return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START; +} -void keystone_restart(enum reboot_mode mode, const char *cmd) +static void __init keystone_init_meminfo(void) { - u32 val; + bool lpae = IS_ENABLED(CONFIG_ARM_LPAE); + bool pvpatch = IS_ENABLED(CONFIG_ARM_PATCH_PHYS_VIRT); + phys_addr_t offset = PHYS_OFFSET - KEYSTONE_LOW_PHYS_START; + phys_addr_t mem_start, mem_end; + + mem_start = memblock_start_of_DRAM(); + mem_end = memblock_end_of_DRAM(); + + /* nothing to do if we are running out of the <32-bit space */ + if (mem_start >= KEYSTONE_LOW_PHYS_START && + mem_end <= KEYSTONE_LOW_PHYS_END) + return; + + if (!lpae || !pvpatch) { + pr_crit("Enable %s%s%s to run outside 32-bit space\n", + !lpae ? __stringify(CONFIG_ARM_LPAE) : "", + (!lpae && !pvpatch) ? " and " : "", + !pvpatch ? __stringify(CONFIG_ARM_PATCH_PHYS_VIRT) : ""); + } + + if (mem_start < KEYSTONE_HIGH_PHYS_START || + mem_end > KEYSTONE_HIGH_PHYS_END) { + pr_crit("Invalid address space for memory (%08llx-%08llx)\n", + (u64)mem_start, (u64)mem_end); + } - BUG_ON(!keystone_rstctrl); + offset += KEYSTONE_HIGH_PHYS_START; + __pv_phys_pfn_offset = PFN_DOWN(offset); + __pv_offset = (offset - PAGE_OFFSET); - /* Enable write access to RSTCTRL */ - val = readl(keystone_rstctrl); - val &= PLL_RESET_WRITE_KEY_MASK; - val |= PLL_RESET_WRITE_KEY; - writel(val, keystone_rstctrl); + /* Populate the arch idmap hook */ + arch_virt_to_idmap = keystone_virt_to_idmap; + platform_nb.notifier_call = keystone_platform_notifier; + keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START - + KEYSTONE_LOW_PHYS_START); - /* Reset the SOC */ - val = readl(keystone_rstctrl); - val &= ~PLL_RESET; - writel(val, keystone_rstctrl); + pr_info("Switching to high address space at 0x%llx\n", (u64)offset); } +static const char *keystone_match[] __initconst = { + "ti,keystone", + NULL, +}; + DT_MACHINE_START(KEYSTONE, "Keystone") #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) .dma_zone_size = SZ_2G, @@ -75,5 +115,5 @@ DT_MACHINE_START(KEYSTONE, "Keystone") .smp = smp_ops(keystone_smp_ops), .init_machine = keystone_init, .dt_compat = keystone_match, - .restart = keystone_restart, + .init_meminfo = keystone_init_meminfo, MACHINE_END diff --git a/arch/arm/mach-keystone/memory.h b/arch/arm/mach-keystone/memory.h new file mode 100644 index 000000000000..b854fb18eef1 --- /dev/null +++ b/arch/arm/mach-keystone/memory.h @@ -0,0 +1,24 @@ +/* + * Copyright 2014 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#ifndef __MEMORY_H +#define __MEMORY_H + +#define MAX_PHYSMEM_BITS 36 +#define SECTION_SIZE_BITS 34 + +#define KEYSTONE_LOW_PHYS_START 0x80000000ULL +#define KEYSTONE_LOW_PHYS_SIZE 0x80000000ULL /* 2G */ +#define KEYSTONE_LOW_PHYS_END (KEYSTONE_LOW_PHYS_START + \ + KEYSTONE_LOW_PHYS_SIZE - 1) + +#define KEYSTONE_HIGH_PHYS_START 0x800000000ULL +#define KEYSTONE_HIGH_PHYS_SIZE 0x400000000ULL /* 16G */ +#define KEYSTONE_HIGH_PHYS_END (KEYSTONE_HIGH_PHYS_START + \ + KEYSTONE_HIGH_PHYS_SIZE - 1) +#endif /* __MEMORY_H */ diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 5cf0683577ea..5f46a7cf907b 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -17,13 +17,16 @@ #include <linux/io.h> #include <asm/smp_plat.h> +#include <asm/prom.h> +#include <asm/tlbflush.h> +#include <asm/pgtable.h> #include "keystone.h" static int keystone_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long start = virt_to_phys(&secondary_startup); + unsigned long start = virt_to_idmap(&secondary_startup); int error; pr_debug("keystone-smp: booting cpu %d, vector %08lx\n", @@ -36,6 +39,19 @@ static int keystone_smp_boot_secondary(unsigned int cpu, return error; } +#ifdef CONFIG_ARM_LPAE +static void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) +{ + pgd_t *pgd0 = pgd_offset_k(0); + cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET); + local_flush_tlb_all(); +} +#else +static inline void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) +{} +#endif + struct smp_operations keystone_smp_ops __initdata = { .smp_boot_secondary = keystone_smp_boot_secondary, + .smp_secondary_init = keystone_smp_secondary_initmem, }; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 2801da49e2a3..ff18ff20f71f 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -195,7 +195,7 @@ static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 2a97a2e4163c..2c47a8ad0e27 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include <asm/exception.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> @@ -30,11 +31,47 @@ static int __initdata gpio1_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE; + +asmlinkage void +__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init kirkwood_init_irq(void) { orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(kirkwood_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-49. */ diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 34932e0e31fa..7858d5b6f6ce 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -202,9 +202,6 @@ static struct mmci_platform_data lpc32xx_mmci_data = { .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | MMC_VDD_33_34, .ios_handler = mmc_handle_ios, - .dma_filter = NULL, - /* No DMA for now since AMBA PL080 dmaengine driver only does scatter - * gather, and the MMCI driver doesn't do it this way */ }; static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index a7f959e58c3d..9b26976fb084 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -42,9 +42,6 @@ config ARCH_QSD8X50 endchoice -config MSM_HAS_DEBUG_UART_HS - bool - config MSM_SOC_REV_A bool diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index a77529887cbc..61bfe584a9d7 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -83,11 +83,6 @@ static void __init halibut_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init halibut_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) -{ -} - static void __init halibut_map_io(void) { msm_map_common_io(); @@ -100,7 +95,6 @@ static void __init halibut_init_late(void) MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") .atag_offset = 0x100, - .fixup = halibut_fixup, .map_io = halibut_map_io, .init_early = halibut_init_early, .init_irq = halibut_init_irq, diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index 7d9981cb400e..873c3ca3cd7e 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -52,16 +53,10 @@ static void __init mahimahi_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init mahimahi_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init mahimahi_fixup(struct tag *tags, char **cmdline) { - mi->nr_banks = 2; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); - mi->bank[0].size = (219*1024*1024); - mi->bank[1].start = MSM_HIGHMEM_BASE; - mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE); - mi->bank[1].size = MSM_HIGHMEM_SIZE; + memblock_add(PHYS_OFFSET, 219*SZ_1M); + memblock_add(MSM_HIGHMEM_BASE, MSM_HIGHMEM_SIZE); } static void __init mahimahi_map_io(void) diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 46de789ad3ae..245884319d2e 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -40,8 +40,7 @@ #include "proc_comm.h" #include "common.h" -static void __init msm7x30_fixup(struct tag *tag, char **cmdline, - struct meminfo *mi) +static void __init msm7x30_fixup(struct tag *tag, char **cmdline) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { @@ -95,7 +94,7 @@ static int hsusb_phy_clk_reset(struct clk *phy_clk) static struct msm_otg_platform_data msm_otg_pdata = { .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_PERIPHERAL, + .mode = USB_DR_MODE_PERIPHERAL, .otg_control = OTG_PHY_CONTROL, .link_clk_reset = hsusb_link_clk_reset, .phy_clk_reset = hsusb_phy_clk_reset, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 9169ec324a43..4c748616ef47 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -116,7 +116,7 @@ static int hsusb_phy_clk_reset(struct clk *phy_clk) static struct msm_otg_platform_data msm_otg_pdata = { .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_PERIPHERAL, + .mode = USB_DR_MODE_PERIPHERAL, .otg_control = OTG_PHY_CONTROL, .link_clk_reset = hsusb_link_clk_reset, .phy_clk_reset = hsusb_phy_clk_reset, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 327605174d63..e50967926dcd 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -35,6 +35,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/memblock.h> #include "gpio_chip.h" #include "board-sapphire.h" @@ -74,22 +75,18 @@ static struct map_desc sapphire_io_desc[] __initdata = { } }; -static void __init sapphire_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init sapphire_fixup(struct tag *tags, char **cmdline) { int smi_sz = parse_tag_smi((const struct tag *)tags); - mi->nr_banks = 1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); if (smi_sz == 32) { - mi->bank[0].size = (84*1024*1024); + memblock_add(PHYS_OFFSET, 84*SZ_1M); } else if (smi_sz == 64) { - mi->bank[0].size = (101*1024*1024); + memblock_add(PHYS_OFFSET, 101*SZ_1M); } else { + memblock_add(PHYS_OFFSET, 101*SZ_1M); /* Give a default value when not get smi size */ smi_sz = 64; - mi->bank[0].size = (101*1024*1024); } } diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c index 87e1d01edecc..2c25050209ce 100644 --- a/arch/arm/mach-msm/board-trout-gpio.c +++ b/arch/arm/mach-msm/board-trout-gpio.c @@ -89,7 +89,7 @@ static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset) .base = base_gpio, \ .ngpio = 8, \ }, \ - .reg = (void *) reg_num + TROUT_CPLD_BASE, \ + .reg = reg_num + TROUT_CPLD_BASE, \ .shadow = shadow_val, \ } diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 015d544aa017..f72b07de2152 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/system_info.h> #include <asm/mach-types.h> @@ -55,12 +56,9 @@ static void __init trout_init_irq(void) msm_init_irq(); } -static void __init trout_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init trout_fixup(struct tag *tags, char **cmdline) { - mi->nr_banks = 1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = (101*1024*1024); + memblock_add(PHYS_OFFSET, 101*SZ_1M); } static void __init trout_init(void) @@ -78,7 +76,7 @@ static void __init trout_init(void) static struct map_desc trout_io_desc[] __initdata = { { - .virtual = TROUT_CPLD_BASE, + .virtual = (unsigned long)TROUT_CPLD_BASE, .pfn = __phys_to_pfn(TROUT_CPLD_START), .length = TROUT_CPLD_SIZE, .type = MT_DEVICE_NONSHARED diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h index b2379ede43bc..adb757abbb92 100644 --- a/arch/arm/mach-msm/board-trout.h +++ b/arch/arm/mach-msm/board-trout.h @@ -58,7 +58,7 @@ #define TROUT_4_TP_LS_EN 19 #define TROUT_5_TP_LS_EN 1 -#define TROUT_CPLD_BASE 0xE8100000 +#define TROUT_CPLD_BASE IOMEM(0xE8100000) #define TROUT_CPLD_START 0x98000000 #define TROUT_CPLD_SIZE SZ_4K diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 3f73eecbcfb0..6090b9eb00c8 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -3,15 +3,13 @@ config ARCH_MVEBU select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select IRQ_DOMAIN select PINCTRL select PLAT_ORION + select SOC_BUS select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB - select MIGHT_HAVE_PCI select PCI_QUIRKS if PCI - select OF_ADDRESS_PCI if ARCH_MVEBU @@ -38,7 +36,9 @@ config MACH_ARMADA_375 select ARM_ERRATA_753970 select ARM_GIC select ARMADA_375_CLK - select CPU_V7 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 help @@ -51,7 +51,9 @@ config MACH_ARMADA_38X select ARM_ERRATA_753970 select ARM_GIC select ARMADA_38X_CLK - select CPU_V7 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X help @@ -86,24 +88,15 @@ config MACH_KIRKWOOD select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK - select OF_IRQ select ORION_IRQCHIP select ORION_TIMER select PCI select PCI_QUIRKS select PINCTRL_KIRKWOOD - select USE_OF help Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -config MACH_T5325 - bool "HP T5325 thin client" - depends on MACH_KIRKWOOD - help - Say 'Y' here if you want your kernel to support the - HP T5325 Thin client - endmenu endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index a63e43b6b451..2ecb828e4a8b 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -2,12 +2,15 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include AFLAGS_coherency_ll.o := -Wa,-march=armv7-a +CFLAGS_pmsu.o := -march=armv7-a obj-y += system-controller.o mvebu-soc-id.o -obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o + +ifeq ($(CONFIG_MACH_MVEBU_V7),y) +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif + obj-$(CONFIG_MACH_DOVE) += dove.o -obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o -obj-$(CONFIG_MACH_T5325) += board-t5325.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index 237c86b83390..c3465f5b1250 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -20,8 +20,6 @@ #define ARMADA_XP_MAX_CPUS 4 -void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq); -void armada_xp_mpic_smp_cpu_init(void); void armada_xp_secondary_startup(void); extern struct smp_operations armada_xp_smp_ops; #endif diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c deleted file mode 100644 index 65ace6db9f28..000000000000 --- a/arch/arm/mach-mvebu/board-t5325.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * HP T5325 Board Setup - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <sound/alc5623.h> -#include "board.h" - -static struct platform_device hp_t5325_audio_device = { - .name = "t5325-audio", - .id = -1, -}; - -static struct alc5623_platform_data alc5621_data = { - .add_ctrl = 0x3700, - .jack_det_ctrl = 0x4810, -}; - -static struct i2c_board_info i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("alc5621", 0x1a), - .platform_data = &alc5621_data, - }, -}; - -void __init t5325_init(void) -{ - i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); - platform_device_register(&hp_t5325_audio_device); -} diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 333fca8fdc41..8bb742fdf5ca 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -27,12 +27,30 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/smp_scu.h> #include "armada-370-xp.h" #include "common.h" #include "coherency.h" #include "mvebu-soc-id.h" /* + * Enables the SCU when available. Obviously, this is only useful on + * Cortex-A based SOCs, not on PJ4B based ones. + */ +static void __init mvebu_scu_enable(void) +{ + void __iomem *scu_base; + + struct device_node *np = + of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (np) { + scu_base = of_iomap(np, 0); + scu_enable(scu_base); + of_node_put(np); + } +} + +/* * Early versions of Armada 375 SoC have a bug where the BootROM * leaves an external data abort pending. The kernel is hit by this * data abort as soon as it enters userspace, because it unmasks the @@ -57,11 +75,9 @@ static void __init mvebu_timer_and_clk_init(void) { of_clk_init(NULL); clocksource_of_init(); + mvebu_scu_enable(); coherency_init(); - BUG_ON(mvebu_mbus_dt_init()); -#ifdef CONFIG_CACHE_L2X0 - l2x0_of_init(0, ~0UL); -#endif + BUG_ON(mvebu_mbus_dt_init(coherency_available())); if (of_machine_is_compatible("marvell,armada375")) hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, @@ -78,7 +94,7 @@ static void __init i2c_quirk(void) * mechanism. We can exit only if we are sure that we can * get the SoC revision and it is more recent than A0. */ - if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV) + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV) return; for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") { @@ -96,10 +112,66 @@ static void __init i2c_quirk(void) return; } +#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc + +static void __init thermal_quirk(void) +{ + struct device_node *np; + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + return; + + for_each_compatible_node(np, NULL, "marvell,armada375-thermal") { + struct property *prop; + __be32 newval, *newprop, *oldprop; + int len; + + /* + * The register offset is at a wrong location. This quirk + * creates a new reg property as a clone of the previous + * one and corrects the offset. + */ + oldprop = (__be32 *)of_get_property(np, "reg", &len); + if (!oldprop) + continue; + + /* Create a duplicate of the 'reg' property */ + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + prop->length = len; + prop->name = kstrdup("reg", GFP_KERNEL); + prop->value = kzalloc(len, GFP_KERNEL); + memcpy(prop->value, oldprop, len); + + /* Fixup the register offset of the second entry */ + oldprop += 2; + newprop = (__be32 *)prop->value + 2; + newval = cpu_to_be32(be32_to_cpu(*oldprop) - + A375_Z1_THERMAL_FIXUP_OFFSET); + *newprop = newval; + of_update_property(np, prop); + + /* + * The thermal controller needs some quirk too, so let's change + * the compatible string to reflect this. + */ + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + prop->name = kstrdup("compatible", GFP_KERNEL); + prop->length = sizeof("marvell,armada375-z1-thermal"); + prop->value = kstrdup("marvell,armada375-z1-thermal", + GFP_KERNEL); + of_update_property(np, prop); + } + return; +} + static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("plathome,openblocks-ax3-4")) i2c_quirk(); + if (of_machine_is_compatible("marvell,a375-db")) + thermal_quirk(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -109,6 +181,8 @@ static const char * const armada_370_xp_dt_compat[] = { }; DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(armada_xp_smp_ops), .init_machine = mvebu_dt_init, .init_time = mvebu_timer_and_clk_init, @@ -122,7 +196,10 @@ static const char * const armada_375_dt_compat[] = { }; DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_time = mvebu_timer_and_clk_init, + .init_machine = mvebu_dt_init, .restart = mvebu_restart, .dt_compat = armada_375_dt_compat, MACHINE_END @@ -134,6 +211,8 @@ static const char * const armada_38x_dt_compat[] = { }; DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_time = mvebu_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_38x_dt_compat, diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h index de7f0a191394..9c7bb4386f8b 100644 --- a/arch/arm/mach-mvebu/board.h +++ b/arch/arm/mach-mvebu/board.h @@ -13,10 +13,4 @@ #ifndef __ARCH_MVEBU_BOARD_H #define __ARCH_MVEBU_BOARD_H -#ifdef CONFIG_MACH_T5325 -void t5325_init(void); -#else -static inline void t5325_init(void) {}; -#endif - #endif diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 4e9d58148ca7..477202fd39cc 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -17,6 +17,8 @@ * supplies basic routines for configuring and controlling hardware coherency */ +#define pr_fmt(fmt) "mvebu-coherency: " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/of_address.h> @@ -24,13 +26,19 @@ #include <linux/smp.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mbus.h> +#include <linux/clk.h> +#include <linux/pci.h> #include <asm/smp_plat.h> #include <asm/cacheflush.h> +#include <asm/mach/map.h> #include "armada-370-xp.h" #include "coherency.h" +#include "mvebu-soc-id.h" unsigned long coherency_phys_base; -static void __iomem *coherency_base; +void __iomem *coherency_base; static void __iomem *coherency_cpu_base; /* Coherency fabric registers */ @@ -38,27 +46,190 @@ static void __iomem *coherency_cpu_base; #define IO_SYNC_BARRIER_CTL_OFFSET 0x0 +enum { + COHERENCY_FABRIC_TYPE_NONE, + COHERENCY_FABRIC_TYPE_ARMADA_370_XP, + COHERENCY_FABRIC_TYPE_ARMADA_375, + COHERENCY_FABRIC_TYPE_ARMADA_380, +}; + static struct of_device_id of_coherency_table[] = { - {.compatible = "marvell,coherency-fabric"}, + {.compatible = "marvell,coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP }, + {.compatible = "marvell,armada-375-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 }, + {.compatible = "marvell,armada-380-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 }, { /* end of list */ }, }; -/* Function defined in coherency_ll.S */ -int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id); +/* Functions defined in coherency_ll.S */ +int ll_enable_coherency(void); +void ll_add_cpu_to_smp_group(void); -int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id) +int set_cpu_coherent(void) { if (!coherency_base) { - pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id); + pr_warn("Can't make current CPU cache coherent.\n"); pr_warn("Coherency fabric is not initialized\n"); return 1; } - return ll_set_cpu_coherent(coherency_base, hw_cpu_id); + ll_add_cpu_to_smp_group(); + return ll_enable_coherency(); +} + +/* + * The below code implements the I/O coherency workaround on Armada + * 375. This workaround consists in using the two channels of the + * first XOR engine to trigger a XOR transaction that serves as the + * I/O coherency barrier. + */ + +static void __iomem *xor_base, *xor_high_base; +static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS]; +static void *coherency_wa_buf[CONFIG_NR_CPUS]; +static bool coherency_wa_enabled; + +#define XOR_CONFIG(chan) (0x10 + (chan * 4)) +#define XOR_ACTIVATION(chan) (0x20 + (chan * 4)) +#define WINDOW_BAR_ENABLE(chan) (0x240 + ((chan) << 2)) +#define WINDOW_BASE(w) (0x250 + ((w) << 2)) +#define WINDOW_SIZE(w) (0x270 + ((w) << 2)) +#define WINDOW_REMAP_HIGH(w) (0x290 + ((w) << 2)) +#define WINDOW_OVERRIDE_CTRL(chan) (0x2A0 + ((chan) << 2)) +#define XOR_DEST_POINTER(chan) (0x2B0 + (chan * 4)) +#define XOR_BLOCK_SIZE(chan) (0x2C0 + (chan * 4)) +#define XOR_INIT_VALUE_LOW 0x2E0 +#define XOR_INIT_VALUE_HIGH 0x2E4 + +static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void) +{ + int idx = smp_processor_id(); + + /* Write '1' to the first word of the buffer */ + writel(0x1, coherency_wa_buf[idx]); + + /* Wait until the engine is idle */ + while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3) + ; + + dmb(); + + /* Trigger channel */ + writel(0x1, xor_base + XOR_ACTIVATION(idx)); + + /* Poll the data until it is cleared by the XOR transaction */ + while (readl(coherency_wa_buf[idx])) + ; +} + +static void __init armada_375_coherency_init_wa(void) +{ + const struct mbus_dram_target_info *dram; + struct device_node *xor_node; + struct property *xor_status; + struct clk *xor_clk; + u32 win_enable = 0; + int i; + + pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n"); + + /* + * Since the workaround uses one XOR engine, we grab a + * reference to its Device Tree node first. + */ + xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor"); + BUG_ON(!xor_node); + + /* + * Then we mark it as disabled so that the real XOR driver + * will not use it. + */ + xor_status = kzalloc(sizeof(struct property), GFP_KERNEL); + BUG_ON(!xor_status); + + xor_status->value = kstrdup("disabled", GFP_KERNEL); + BUG_ON(!xor_status->value); + + xor_status->length = 8; + xor_status->name = kstrdup("status", GFP_KERNEL); + BUG_ON(!xor_status->name); + + of_update_property(xor_node, xor_status); + + /* + * And we remap the registers, get the clock, and do the + * initial configuration of the XOR engine. + */ + xor_base = of_iomap(xor_node, 0); + xor_high_base = of_iomap(xor_node, 1); + + xor_clk = of_clk_get_by_name(xor_node, NULL); + BUG_ON(!xor_clk); + + clk_prepare_enable(xor_clk); + + dram = mv_mbus_dram_info(); + + for (i = 0; i < 8; i++) { + writel(0, xor_base + WINDOW_BASE(i)); + writel(0, xor_base + WINDOW_SIZE(i)); + if (i < 4) + writel(0, xor_base + WINDOW_REMAP_HIGH(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + writel((cs->base & 0xffff0000) | + (cs->mbus_attr << 8) | + dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i)); + writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i)); + + win_enable |= (1 << i); + win_enable |= 3 << (16 + (2 * i)); + } + + writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0)); + writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1)); + writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0)); + writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1)); + + for (i = 0; i < CONFIG_NR_CPUS; i++) { + coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL); + BUG_ON(!coherency_wa_buf[i]); + + /* + * We can't use the DMA mapping API, since we don't + * have a valid 'struct device' pointer + */ + coherency_wa_buf_phys[i] = + virt_to_phys(coherency_wa_buf[i]); + BUG_ON(!coherency_wa_buf_phys[i]); + + /* + * Configure the XOR engine for memset operation, with + * a 128 bytes block size + */ + writel(0x444, xor_base + XOR_CONFIG(i)); + writel(128, xor_base + XOR_BLOCK_SIZE(i)); + writel(coherency_wa_buf_phys[i], + xor_base + XOR_DEST_POINTER(i)); + } + + writel(0x0, xor_base + XOR_INIT_VALUE_LOW); + writel(0x0, xor_base + XOR_INIT_VALUE_HIGH); + + coherency_wa_enabled = true; } static inline void mvebu_hwcc_sync_io_barrier(void) { + if (coherency_wa_enabled) { + mvebu_hwcc_armada375_sync_io_barrier_wa(); + return; + } + writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET); while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1); } @@ -105,8 +276,8 @@ static struct dma_map_ops mvebu_hwcc_dma_ops = { .set_dma_mask = arm_dma_set_mask, }; -static int mvebu_hwcc_platform_notifier(struct notifier_block *nb, - unsigned long event, void *__dev) +static int mvebu_hwcc_notifier(struct notifier_block *nb, + unsigned long event, void *__dev) { struct device *dev = __dev; @@ -117,47 +288,148 @@ static int mvebu_hwcc_platform_notifier(struct notifier_block *nb, return NOTIFY_OK; } -static struct notifier_block mvebu_hwcc_platform_nb = { - .notifier_call = mvebu_hwcc_platform_notifier, +static struct notifier_block mvebu_hwcc_nb = { + .notifier_call = mvebu_hwcc_notifier, }; -int __init coherency_init(void) +static void __init armada_370_coherency_init(struct device_node *np) +{ + struct resource res; + + of_address_to_resource(np, 0, &res); + coherency_phys_base = res.start; + /* + * Ensure secondary CPUs will see the updated value, + * which they read before they join the coherency + * fabric, and therefore before they are coherent with + * the boot CPU cache. + */ + sync_cache_w(&coherency_phys_base); + coherency_base = of_iomap(np, 0); + coherency_cpu_base = of_iomap(np, 1); + set_cpu_coherent(); +} + +/* + * This ioremap hook is used on Armada 375/38x to ensure that PCIe + * memory areas are mapped as MT_UNCACHED instead of MT_DEVICE. This + * is needed as a workaround for a deadlock issue between the PCIe + * interface and the cache controller. + */ +static void __iomem * +armada_pcie_wa_ioremap_caller(phys_addr_t phys_addr, size_t size, + unsigned int mtype, void *caller) +{ + struct resource pcie_mem; + + mvebu_mbus_get_pcie_mem_aperture(&pcie_mem); + + if (pcie_mem.start <= phys_addr && (phys_addr + size) <= pcie_mem.end) + mtype = MT_UNCACHED; + + return __arm_ioremap_caller(phys_addr, size, mtype, caller); +} + +static void __init armada_375_380_coherency_init(struct device_node *np) +{ + struct device_node *cache_dn; + + coherency_cpu_base = of_iomap(np, 0); + arch_ioremap_caller = armada_pcie_wa_ioremap_caller; + + /* + * Add the PL310 property "arm,io-coherent". This makes sure the + * outer sync operation is not used, which allows to + * workaround the system erratum that causes deadlocks when + * doing PCIe in an SMP situation on Armada 375 and Armada + * 38x. + */ + for_each_compatible_node(cache_dn, NULL, "arm,pl310-cache") { + struct property *p; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + p->name = kstrdup("arm,io-coherent", GFP_KERNEL); + of_add_property(cache_dn, p); + } +} + +static int coherency_type(void) { struct device_node *np; + const struct of_device_id *match; - np = of_find_matching_node(NULL, of_coherency_table); + np = of_find_matching_node_and_match(NULL, of_coherency_table, &match); if (np) { - struct resource res; - pr_info("Initializing Coherency fabric\n"); - of_address_to_resource(np, 0, &res); - coherency_phys_base = res.start; - /* - * Ensure secondary CPUs will see the updated value, - * which they read before they join the coherency - * fabric, and therefore before they are coherent with - * the boot CPU cache. - */ - sync_cache_w(&coherency_phys_base); - coherency_base = of_iomap(np, 0); - coherency_cpu_base = of_iomap(np, 1); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); - of_node_put(np); + int type = (int) match->data; + + /* Armada 370/XP coherency works in both UP and SMP */ + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + return type; + + /* Armada 375 coherency works only on SMP */ + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp()) + return type; + + /* Armada 380 coherency works only on SMP */ + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp()) + return type; } - return 0; + return COHERENCY_FABRIC_TYPE_NONE; } -static int __init coherency_late_init(void) +int coherency_available(void) +{ + return coherency_type() != COHERENCY_FABRIC_TYPE_NONE; +} + +int __init coherency_init(void) { + int type = coherency_type(); struct device_node *np; np = of_find_matching_node(NULL, of_coherency_table); - if (np) { - bus_register_notifier(&platform_bus_type, - &mvebu_hwcc_platform_nb); - of_node_put(np); + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + armada_370_coherency_init(np); + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 || + type == COHERENCY_FABRIC_TYPE_ARMADA_380) + armada_375_380_coherency_init(np); + + return 0; +} + +static int __init coherency_late_init(void) +{ + int type = coherency_type(); + + if (type == COHERENCY_FABRIC_TYPE_NONE) + return 0; + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) { + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && + rev == ARMADA_375_Z1_REV) + armada_375_coherency_init_wa(); } + + bus_register_notifier(&platform_bus_type, + &mvebu_hwcc_nb); + return 0; } postcore_initcall(coherency_late_init); + +#if IS_ENABLED(CONFIG_PCI) +static int __init coherency_pci_init(void) +{ + if (coherency_available()) + bus_register_notifier(&pci_bus_type, + &mvebu_hwcc_nb); + return 0; +} + +arch_initcall(coherency_pci_init); +#endif diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h index 760226c41353..54cb7607b526 100644 --- a/arch/arm/mach-mvebu/coherency.h +++ b/arch/arm/mach-mvebu/coherency.h @@ -15,8 +15,9 @@ #define __MACH_370_XP_COHERENCY_H extern unsigned long coherency_phys_base; +int set_cpu_coherent(void); -int set_cpu_coherent(unsigned int cpu_id, int smp_group_id); int coherency_init(void); +int coherency_available(void); #endif /* __MACH_370_XP_COHERENCY_H */ diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index ee7598fe75db..510c29e079ca 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -21,38 +21,129 @@ #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4 #include <asm/assembler.h> +#include <asm/cp15.h> .text +/* Returns the coherency base address in r1 (r0 is untouched) */ +ENTRY(ll_get_coherency_base) + mrc p15, 0, r1, c1, c0, 0 + tst r1, #CR_M @ Check MMU bit enabled + bne 1f + + /* + * MMU is disabled, use the physical address of the coherency + * base address. + */ + adr r1, 3f + ldr r3, [r1] + ldr r1, [r1, r3] + b 2f +1: + /* + * MMU is enabled, use the virtual address of the coherency + * base address. + */ + ldr r1, =coherency_base + ldr r1, [r1] +2: + mov pc, lr +ENDPROC(ll_get_coherency_base) + /* - * r0: Coherency fabric base register address - * r1: HW CPU id + * Returns the coherency CPU mask in r3 (r0 is untouched). This + * coherency CPU mask can be used with the coherency fabric + * configuration and control registers. Note that the mask is already + * endian-swapped as appropriate so that the calling functions do not + * have to care about endianness issues while accessing the coherency + * fabric registers */ -ENTRY(ll_set_cpu_coherent) - /* Create bit by cpu index */ - mov r3, #(1 << 24) - lsl r1, r3, r1 -ARM_BE8(rev r1, r1) - - /* Add CPU to SMP group - Atomic */ - add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET -1: - ldrex r2, [r3] - orr r2, r2, r1 - strex r0, r2, [r3] - cmp r0, #0 - bne 1b - - /* Enable coherency on CPU - Atomic */ - add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET +ENTRY(ll_get_coherency_cpumask) + mrc 15, 0, r3, cr0, cr0, 5 + and r3, r3, #15 + mov r2, #(1 << 24) + lsl r3, r2, r3 +ARM_BE8(rev r3, r3) + mov pc, lr +ENDPROC(ll_get_coherency_cpumask) + +/* + * ll_add_cpu_to_smp_group(), ll_enable_coherency() and + * ll_disable_coherency() use the strex/ldrex instructions while the + * MMU can be disabled. The Armada XP SoC has an exclusive monitor + * that tracks transactions to Device and/or SO memory and thanks to + * that, exclusive transactions are functional even when the MMU is + * disabled. + */ + +ENTRY(ll_add_cpu_to_smp_group) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET 1: - ldrex r2, [r3] - orr r2, r2, r1 - strex r0, r2, [r3] - cmp r0, #0 - bne 1b + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + mov pc, lr +ENDPROC(ll_add_cpu_to_smp_group) +ENTRY(ll_enable_coherency) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b dsb - mov r0, #0 mov pc, lr -ENDPROC(ll_set_cpu_coherent) +ENDPROC(ll_enable_coherency) + +ENTRY(ll_disable_coherency) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + bic r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + dsb + mov pc, lr +ENDPROC(ll_disable_coherency) + + .align 2 +3: + .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h index 55449c487c9e..b67fb7a10d8b 100644 --- a/arch/arm/mach-mvebu/common.h +++ b/arch/arm/mach-mvebu/common.h @@ -18,6 +18,9 @@ #include <linux/reboot.h> void mvebu_restart(enum reboot_mode mode, const char *cmd); +int mvebu_cpu_reset_deassert(int cpu); +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr); +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr); void armada_xp_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c new file mode 100644 index 000000000000..4a8f9eebebea --- /dev/null +++ b/arch/arm/mach-mvebu/cpu-reset.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "mvebu-cpureset: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/resource.h> +#include "armada-370-xp.h" + +static void __iomem *cpu_reset_base; +static size_t cpu_reset_size; + +#define CPU_RESET_OFFSET(cpu) (cpu * 0x8) +#define CPU_RESET_ASSERT BIT(0) + +int mvebu_cpu_reset_deassert(int cpu) +{ + u32 reg; + + if (!cpu_reset_base) + return -ENODEV; + + if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size) + return -EINVAL; + + reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu)); + reg &= ~CPU_RESET_ASSERT; + writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu)); + + return 0; +} + +static int mvebu_cpu_reset_map(struct device_node *np, int res_idx) +{ + struct resource res; + + if (of_address_to_resource(np, res_idx, &res)) { + pr_err("unable to get resource\n"); + return -ENOENT; + } + + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + return -EBUSY; + } + + cpu_reset_base = ioremap(res.start, resource_size(&res)); + if (!cpu_reset_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + return -ENOMEM; + } + + cpu_reset_size = resource_size(&res); + + return 0; +} + +int __init mvebu_cpu_reset_init(void) +{ + struct device_node *np; + int res_idx; + int ret; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-cpu-reset"); + if (np) { + res_idx = 0; + } else { + /* + * This code is kept for backward compatibility with + * old Device Trees. + */ + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-xp-pmsu"); + if (np) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res_idx = 1; + } + } + + /* No reset node found */ + if (!np) + return -ENODEV; + + ret = mvebu_cpu_reset_map(np, res_idx); + of_node_put(np); + + return ret; +} + +early_initcall(mvebu_cpu_reset_init); diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index 5e5a43624237..b50464ec1130 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -23,7 +23,7 @@ static void __init dove_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S new file mode 100644 index 000000000000..5925366bc03c --- /dev/null +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -0,0 +1,34 @@ +/* + * SMP support: Entry point for secondary CPUs of Marvell EBU + * Cortex-A9 based SOCs (Armada 375 and Armada 38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + + __CPUINIT +#define CPU_RESUME_ADDR_REG 0xf10182d4 + +.global armada_375_smp_cpu1_enable_code_start +.global armada_375_smp_cpu1_enable_code_end + +armada_375_smp_cpu1_enable_code_start: + ldr r0, [pc, #4] + ldr r1, [r0] + mov pc, r1 + .word CPU_RESUME_ADDR_REG +armada_375_smp_cpu1_enable_code_end: + +ENTRY(mvebu_cortex_a9_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(mvebu_cortex_a9_secondary_startup) diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S index 3dd80df428f7..2c4032e368ba 100644 --- a/arch/arm/mach-mvebu/headsmp.S +++ b/arch/arm/mach-mvebu/headsmp.S @@ -31,21 +31,10 @@ ENTRY(armada_xp_secondary_startup) ARM_BE8(setend be ) @ go BE8 if entered LE - /* Get coherency fabric base physical address */ - adr r0, 1f - ldr r1, [r0] - ldr r0, [r0, r1] + bl ll_add_cpu_to_smp_group - /* Read CPU id */ - mrc p15, 0, r1, c0, c0, 5 - and r1, r1, #0xF + bl ll_enable_coherency - /* Add CPU to coherency fabric */ - bl ll_set_cpu_coherent b secondary_startup ENDPROC(armada_xp_secondary_startup) - - .align 2 -1: - .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 120207fc36f1..46f105913c84 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -169,7 +169,7 @@ static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); @@ -180,9 +180,6 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - if (of_machine_is_compatible("hp,t5325")) - t5325_init(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c index f3d4cf53f746..d0f35b4d4a23 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.c +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -23,6 +23,8 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include "mvebu-soc-id.h" #define PCIE_DEV_ID_OFF 0x0 @@ -108,7 +110,18 @@ static int __init mvebu_soc_id_init(void) iounmap(pci_base); res_ioremap: - clk_disable_unprepare(clk); + /* + * If the PCIe unit is actually enabled and we have PCI + * support in the kernel, we intentionally do not release the + * reference to the clock. We want to keep it running since + * the bootloader does some PCIe link configuration that the + * kernel is for now unable to do, and gating the clock would + * make us loose this precious configuration. + */ + if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) { + clk_disable_unprepare(clk); + clk_put(clk); + } clk_err: of_node_put(child); @@ -116,5 +129,33 @@ clk_err: return ret; } -core_initcall(mvebu_soc_id_init); +early_initcall(mvebu_soc_id_init); + +static int __init mvebu_soc_device(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + + /* Also protects against running on non-mvebu systems */ + if (!is_id_valid) + return 0; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENOMEM; + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id); + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + } + + return 0; +} +postcore_initcall(mvebu_soc_device); diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h index 31654252fe35..c16bb68ca81f 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.h +++ b/arch/arm/mach-mvebu/mvebu-soc-id.h @@ -20,6 +20,10 @@ #define MV78XX0_A0_REV 0x1 #define MV78XX0_B0_REV 0x2 +/* Armada 375 */ +#define ARMADA_375_Z1_REV 0x0 +#define ARMADA_375_A0_REV 0x3 + #ifdef CONFIG_ARCH_MVEBU int mvebu_get_soc_id(u32 *dev, u32 *rev); #else diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c new file mode 100644 index 000000000000..96c2c59e34b6 --- /dev/null +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -0,0 +1,102 @@ +/* + * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9 + * based SOCs (Armada 375/38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <linux/mbus.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include "common.h" +#include "mvebu-soc-id.h" +#include "pmsu.h" + +#define CRYPT0_ENG_ID 41 +#define CRYPT0_ENG_ATTR 0x1 +#define SRAM_PHYS_BASE 0xFFFF0000 + +#define BOOTROM_BASE 0xFFF00000 +#define BOOTROM_SIZE 0x100000 + +extern unsigned char armada_375_smp_cpu1_enable_code_end; +extern unsigned char armada_375_smp_cpu1_enable_code_start; + +void armada_375_smp_cpu1_enable_wa(void) +{ + void __iomem *sram_virt_base; + + mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR, + SRAM_PHYS_BASE, SZ_64K); + sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K); + + memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start, + &armada_375_smp_cpu1_enable_code_end + - &armada_375_smp_cpu1_enable_code_start); +} + +extern void mvebu_cortex_a9_secondary_startup(void); + +static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + int ret, hw_cpu; + + pr_info("Booting CPU %d\n", cpu); + + /* + * Write the address of secondary startup into the system-wide + * flags register. The boot monitor waits until it receives a + * soft interrupt, and then the secondary CPU branches to this + * address. + */ + hw_cpu = cpu_logical_map(cpu); + + if (of_machine_is_compatible("marvell,armada375")) { + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && + rev == ARMADA_375_Z1_REV) + armada_375_smp_cpu1_enable_wa(); + + mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup); + } + else { + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, + mvebu_cortex_a9_secondary_startup); + } + + smp_wmb(); + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_err("Could not start the secondary CPU: %d\n", ret); + return ret; + } + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = { + .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = armada_xp_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp", + &mvebu_cortex_a9_smp_ops); +CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp", + &mvebu_cortex_a9_smp_ops); diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index a6da03f5b24e..88b976b31719 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -70,16 +70,19 @@ static void __init set_secondary_cpus_clock(void) } } -static void armada_xp_secondary_init(unsigned int cpu) -{ - armada_xp_mpic_smp_cpu_init(); -} - static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) { + int ret, hw_cpu; + pr_info("Booting CPU %d\n", cpu); - armada_xp_boot_cpu(cpu, armada_xp_secondary_startup); + hw_cpu = cpu_logical_map(cpu); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_warn("unable to boot CPU: %d\n", ret); + return ret; + } return 0; } @@ -90,8 +93,6 @@ static void __init armada_xp_smp_init_cpus(void) if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS) panic("Invalid number of CPUs in DT\n"); - - set_smp_cross_call(armada_mpic_send_doorbell); } static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) @@ -102,7 +103,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) set_secondary_cpus_clock(); flush_cache_all(); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); + set_cpu_coherent(); /* * In order to boot the secondary CPUs we need to ensure @@ -124,9 +125,11 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations armada_xp_smp_ops __initdata = { .smp_init_cpus = armada_xp_smp_init_cpus, .smp_prepare_cpus = armada_xp_smp_prepare_cpus, - .smp_secondary_init = armada_xp_secondary_init, .smp_boot_secondary = armada_xp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = armada_xp_cpu_die, #endif }; + +CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp", + &armada_xp_smp_ops); diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index d71ef53107c4..53a55c8520bf 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -16,62 +16,283 @@ * other SOC units */ +#define pr_fmt(fmt) "mvebu-pmsu: " fmt + +#include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/of_address.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <linux/smp.h> +#include <linux/resource.h> +#include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> -#include "pmsu.h" +#include <asm/suspend.h> +#include <asm/tlbflush.h> +#include "common.h" static void __iomem *pmsu_mp_base; -static void __iomem *pmsu_reset_base; -#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x24) -#define PMSU_RESET_CTL_OFFSET(cpu) (cpu * 0x8) +#define PMSU_BASE_OFFSET 0x100 +#define PMSU_REG_SIZE 0x1000 + +/* PMSU MP registers */ +#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104) +#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18) +#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16) +#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20) + +#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108) + +#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0) + +#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c) +#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16) +#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17) +#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20) +#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21) +#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22) +#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24) +#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25) + +#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124) + +/* PMSU fabric registers */ +#define L2C_NFABRIC_PM_CTL 0x4 +#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20) + +extern void ll_disable_coherency(void); +extern void ll_enable_coherency(void); + +static struct platform_device armada_xp_cpuidle_device = { + .name = "cpuidle-armada-370-xp", +}; static struct of_device_id of_pmsu_table[] = { - {.compatible = "marvell,armada-370-xp-pmsu"}, + { .compatible = "marvell,armada-370-pmsu", }, + { .compatible = "marvell,armada-370-xp-pmsu", }, + { .compatible = "marvell,armada-380-pmsu", }, { /* end of list */ }, }; -#ifdef CONFIG_SMP -int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr) +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) { - int reg, hw_cpu; + writel(virt_to_phys(boot_addr), pmsu_mp_base + + PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); +} + +static int __init armada_370_xp_pmsu_init(void) +{ + struct device_node *np; + struct resource res; + int ret = 0; + + np = of_find_matching_node(NULL, of_pmsu_table); + if (!np) + return 0; + + pr_info("Initializing Power Management Service Unit\n"); - if (!pmsu_mp_base || !pmsu_reset_base) { - pr_warn("Can't boot CPU. PMSU is uninitialized\n"); - return 1; + if (of_address_to_resource(np, 0, &res)) { + pr_err("unable to get resource\n"); + ret = -ENOENT; + goto out; } - hw_cpu = cpu_logical_map(cpu_id); + if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res.start = res.start - PMSU_BASE_OFFSET; + res.end = res.start + PMSU_REG_SIZE - 1; + } - writel(virt_to_phys(boot_addr), pmsu_mp_base + - PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + ret = -EBUSY; + goto out; + } + + pmsu_mp_base = ioremap(res.start, resource_size(&res)); + if (!pmsu_mp_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + ret = -ENOMEM; + goto out; + } + + out: + of_node_put(np); + return ret; +} + +static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) +{ + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */ + reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL); + reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN; + writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); +} + +static void armada_370_xp_cpu_resume(void) +{ + asm volatile("bl ll_add_cpu_to_smp_group\n\t" + "bl ll_enable_coherency\n\t" + "b cpu_resume\n\t"); +} + +/* No locking is needed because we only access per-CPU registers */ +void armada_370_xp_pmsu_idle_prepare(bool deepidle) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; - /* Release CPU from reset by clearing reset bit*/ - reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu)); - reg &= (~0x1); - writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu)); + /* + * Adjust the PMSU configuration to wait for WFI signal, enable + * IRQ and FIQ as wakeup events, set wait for snoop queue empty + * indication and mask IRQ and FIQ from CPU + */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT | + PMSU_STATUS_AND_MASK_IRQ_WAKEUP | + PMSU_STATUS_AND_MASK_FIQ_WAKEUP | + PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT | + PMSU_STATUS_AND_MASK_IRQ_MASK | + PMSU_STATUS_AND_MASK_FIQ_MASK; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + /* ask HW to power down the L2 Cache if needed */ + if (deepidle) + reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + + /* request power down */ + reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* Disable snoop disable by HW - SW is taking care of it */ + reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP; + writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); +} + +static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + armada_370_xp_pmsu_idle_prepare(deepidle); + + v7_exit_coherency_flush(all); + + ll_disable_coherency(); + + dsb(); + + wfi(); + + /* If we are here, wfi failed. As processors run out of + * coherency for some time, tlbs might be stale, so flush them + */ + local_flush_tlb_all(); + + ll_enable_coherency(); + + /* Test the CR_C bit and set it if it was cleared */ + asm volatile( + "mrc p15, 0, %0, c1, c0, 0 \n\t" + "tst %0, #(1 << 2) \n\t" + "orreq %0, %0, #(1 << 2) \n\t" + "mcreq p15, 0, %0, c1, c0, 0 \n\t" + "isb " + : : "r" (0)); + + pr_warn("Failed to suspend the system\n"); return 0; } -#endif -static int __init armada_370_xp_pmsu_init(void) +static int armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend); +} + +/* No locking is needed because we only access per-CPU registers */ +static noinline void armada_370_xp_pmsu_idle_restore(void) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* cancel ask HW to power down the L2 Cache if possible */ + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* cancel Enable wakeup events and mask interrupts */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP); + reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT; + reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT; + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK); + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); +} + +static int armada_370_xp_cpu_pm_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + if (action == CPU_PM_ENTER) { + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume); + } else if (action == CPU_PM_EXIT) { + armada_370_xp_pmsu_idle_restore(); + } + + return NOTIFY_OK; +} + +static struct notifier_block armada_370_xp_cpu_pm_notifier = { + .notifier_call = armada_370_xp_cpu_pm_notify, +}; + +int __init armada_370_xp_cpu_pm_init(void) { struct device_node *np; + /* + * Check that all the requirements are available to enable + * cpuidle. So far, it is only supported on Armada XP, cpuidle + * needs the coherency fabric and the PMSU enabled + */ + + if (!of_machine_is_compatible("marvell,armadaxp")) + return 0; + + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (!np) + return 0; + of_node_put(np); + np = of_find_matching_node(NULL, of_pmsu_table); - if (np) { - pr_info("Initializing Power Management Service Unit\n"); - pmsu_mp_base = of_iomap(np, 0); - pmsu_reset_base = of_iomap(np, 1); - of_node_put(np); - } + if (!np) + return 0; + of_node_put(np); + + armada_370_xp_pmsu_enable_l2_powerdown_onidle(); + armada_xp_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; + platform_device_register(&armada_xp_cpuidle_device); + cpu_pm_register_notifier(&armada_370_xp_cpu_pm_notifier); return 0; } +arch_initcall(armada_370_xp_cpu_pm_init); early_initcall(armada_370_xp_pmsu_init); diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index 614ba6832ff3..0c5524ac75b7 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -37,6 +37,8 @@ struct mvebu_system_controller { u32 rstoutn_mask_reset_out_en; u32 system_soft_reset; + + u32 resume_boot_addr; }; static struct mvebu_system_controller *mvebu_sc; @@ -52,6 +54,7 @@ static const struct mvebu_system_controller armada_375_system_controller = { .system_soft_reset_offset = 0x58, .rstoutn_mask_reset_out_en = 0x1, .system_soft_reset = 0x1, + .resume_boot_addr = 0xd4, }; static const struct mvebu_system_controller orion_system_controller = { @@ -98,6 +101,16 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd) ; } +#ifdef CONFIG_SMP +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr) +{ + BUG_ON(system_controller_base == NULL); + BUG_ON(mvebu_sc->resume_boot_addr == 0); + writel(virt_to_phys(boot_addr), system_controller_base + + mvebu_sc->resume_boot_addr); +} +#endif + static int __init mvebu_system_controller_init(void) { const struct of_device_id *match; @@ -114,4 +127,4 @@ static int __init mvebu_system_controller_init(void) return 0; } -arch_initcall(mvebu_system_controller_init); +early_initcall(mvebu_system_controller_init); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 4a1065e41e9c..9116ca476d7c 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -143,23 +143,16 @@ static int __init cpu8815_mmcsd_init(void) } device_initcall(cpu8815_mmcsd_init); -static void __init cpu8815_init_of(void) -{ -#ifdef CONFIG_CACHE_L2X0 - /* At full speed latency must be >=2, so 0x249 in low bits */ - l2x0_of_init(0x00730249, 0xfe000fff); -#endif - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * cpu8815_board_compat[] = { "calaosystems,usb-s8815", NULL, }; DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") + /* At full speed latency must be >=2, so 0x249 in low bits */ + .l2c_aux_val = 0x00700249, + .l2c_aux_mask = 0xfe0fefff, .map_io = cpu8815_map_io, - .init_machine = cpu8815_init_of, .restart = cpu8815_restart, .dt_compat = cpu8815_board_compat, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 65d2acb31498..5b45d266d83e 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -346,7 +346,7 @@ static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 816ecd13f81e..bfed4f928663 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -366,7 +366,7 @@ static struct omap_usb_config h3_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index bd5f02e9c354..c49ce83cc1eb 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -312,7 +312,7 @@ static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 3a0262156e93..7436d4cf6596 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -283,7 +283,7 @@ static struct omap_usb_config osk_usb_config __initdata = { * be used, with a NONSTANDARD gender-bending cable/dongle, as * a peripheral. */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .register_dev = 1, .hmc_mode = 0, #else diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 0a8d3349149c..29e526235dc2 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -266,31 +266,6 @@ static struct physmap_flash_data sx1_flash_data = { .nr_parts = ARRAY_SIZE(sx1_partitions), }; -#ifdef CONFIG_SX1_OLD_FLASH -/* MTD Intel StrataFlash - old flashes */ -static struct resource sx1_old_flash_resource[] = { - [0] = { - .start = OMAP_CS0_PHYS, /* Physical */ - .end = OMAP_CS0_PHYS + SZ_16M - 1,, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_CS1_PHYS, - .end = OMAP_CS1_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device sx1_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &sx1_flash_data, - }, - .num_resources = 2, - .resource = &sx1_old_flash_resource, -}; -#else /* MTD Intel 4000 flash - new flashes */ static struct resource sx1_new_flash_resource = { .start = OMAP_CS0_PHYS, @@ -307,7 +282,6 @@ static struct platform_device sx1_flash_device = { .num_resources = 1, .resource = &sx1_new_flash_resource, }; -#endif /*----------- USB -------------------------*/ diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index dbee729e3b6d..34b4c0044961 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -123,19 +123,8 @@ void omap1_pm_idle(void) #warning Enable 32kHz OS timer in order to allow sleep states in idle use_idlect1 = use_idlect1 & ~(1 << 9); #else - - while (enable_dyn_sleep) { - -#ifdef CONFIG_CBUS_TAHVO_USB - extern int vbus_active; - /* Clock requirements? */ - if (vbus_active) - break; -#endif + if (enable_dyn_sleep) do_sleep = 1; - break; - } - #endif #ifdef CONFIG_OMAP_DM_TIMER diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index cb31d4390d52..0ba482638ebf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -65,6 +65,7 @@ config SOC_AM43XX select ARCH_HAS_OPP select ARM_GIC select MACH_OMAP_GENERIC + select MIGHT_HAVE_CACHE_L2X0 config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 543d9a882de3..4f9383cecf76 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -262,12 +262,7 @@ static struct usbhs_phy_data phy_data[] __initdata = { static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ - defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, -#else .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -#endif }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index ac82512b9c8c..e87f2a83d6bf 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ @@ -160,13 +160,13 @@ static u8 get_gpmc0_type(void) if (!fpga_map_addr) return -ENOMEM; - if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV))) + if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV))) /* we dont have an DEBUG FPGA??? */ /* Depend on #defines!! default to strata boot return param */ goto unmap; /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */ - cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; + cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; /* ES2.0 SDP's onwards 4 dip switches are provided for CS */ if (omap_rev() >= OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index b8920b6bc104..9480997ba616 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -43,7 +43,7 @@ static void __init omap_generic_init(void) } #ifdef CONFIG_SOC_OMAP2420 -static const char *omap242x_boards_compat[] __initdata = { +static const char *omap242x_boards_compat[] __initconst = { "ti,omap2420", NULL, }; @@ -62,7 +62,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_OMAP2430 -static const char *omap243x_boards_compat[] __initdata = { +static const char *omap243x_boards_compat[] __initconst = { "ti,omap2430", NULL, }; @@ -81,7 +81,7 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP3 -static const char *omap3_boards_compat[] __initdata = { +static const char *omap3_boards_compat[] __initconst = { "ti,omap3430", "ti,omap3", NULL, @@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *omap36xx_boards_compat[] __initdata = { +static const char *omap36xx_boards_compat[] __initconst = { "ti,omap36xx", NULL, }; @@ -118,7 +118,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *omap3_gp_boards_compat[] __initdata = { +static const char *omap3_gp_boards_compat[] __initconst = { "ti,omap3-beagle", "timll,omap3-devkit8000", NULL, @@ -137,7 +137,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *am3517_boards_compat[] __initdata = { +static const char *am3517_boards_compat[] __initconst = { "ti,am3517", NULL, }; @@ -157,7 +157,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX -static const char *am33xx_boards_compat[] __initdata = { +static const char *am33xx_boards_compat[] __initconst = { "ti,am33xx", NULL, }; @@ -177,7 +177,7 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP4 -static const char *omap4_boards_compat[] __initdata = { +static const char *omap4_boards_compat[] __initconst = { "ti,omap4460", "ti,omap4430", "ti,omap4", @@ -199,7 +199,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_OMAP5 -static const char *omap5_boards_compat[] __initdata = { +static const char *omap5_boards_compat[] __initconst = { "ti,omap5432", "ti,omap5430", "ti,omap5", @@ -221,7 +221,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_AM43XX -static const char *am43_boards_compat[] __initdata = { +static const char *am43_boards_compat[] __initconst = { "ti,am4372", "ti,am43", NULL, @@ -240,13 +240,13 @@ MACHINE_END #endif #ifdef CONFIG_SOC_DRA7XX -static const char *dra7xx_boards_compat[] __initdata = { - "ti,dra7xx", +static const char *dra74x_boards_compat[] __initconst = { + "ti,dra742", "ti,dra7", NULL, }; -DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)") +DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), .map_io = omap5_map_io, @@ -255,7 +255,24 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)") .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, .init_time = omap5_realtime_timer_init, - .dt_compat = dra7xx_boards_compat, + .dt_compat = dra74x_boards_compat, + .restart = omap44xx_restart, +MACHINE_END + +static const char *dra72x_boards_compat[] __initconst = { + "ti,dra722", + NULL, +}; + +DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap5_map_io, + .init_early = dra7xx_init_early, + .init_late = dra7xx_init_late, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap5_realtime_timer_init, + .dt_compat = dra72x_boards_compat, .restart = omap44xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index d6ed819ff15c..e2e52031f056 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,7 +33,6 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> -#include <linux/usb/usb_phy_gen_xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -61,7 +60,8 @@ static struct pwm_lookup pwm_lookup[] = { /* LEDB -> PMU_STAT */ - PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"), + PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat", + 7812500, PWM_POLARITY_NORMAL), }; static struct led_pwm pwm_leds[] = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 119efaf5808a..a2e035e0792a 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -121,11 +121,7 @@ static struct platform_device omap3stalker_tfp410_device = { static struct connector_atv_platform_data omap3stalker_tv_pdata = { .name = "tv", .source = "venc.0", -#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, -#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, -#endif .invert_polarity = false, }; diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 8f5121b89688..eb8c75ec3b1a 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -456,7 +456,8 @@ static struct clk_hw_omap dpll4_m5x2_ck_hw = { .clkdm_name = "dpll4_clkdm", }; -DEFINE_STRUCT_CLK(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, dpll4_m5x2_ck_ops); +DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, + dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT); static struct clk dpll4_m5x2_ck_3630 = { .name = "dpll4_m5x2_ck", diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 3ff32543493c..59cf310bc1e9 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -138,7 +138,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); + tmpset.cm_clksel1_pll = readl_relaxed(dd->mult_div1_reg); tmpset.cm_clksel1_pll &= ~(dd->mult_mask | dd->div1_mask); div = ((curr_prcm_set->xtal_speed / 1000000) - 1); diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c index 19f54d433490..0717dff1bc04 100644 --- a/arch/arm/mach-omap2/clkt2xxx_osc.c +++ b/arch/arm/mach-omap2/clkt2xxx_osc.c @@ -39,9 +39,9 @@ int omap2_enable_osc_ck(struct clk_hw *clk) { u32 pcc; - pcc = __raw_readl(prcm_clksrc_ctrl); + pcc = readl_relaxed(prcm_clksrc_ctrl); - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + writel_relaxed(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); return 0; } @@ -57,9 +57,9 @@ void omap2_disable_osc_ck(struct clk_hw *clk) { u32 pcc; - pcc = __raw_readl(prcm_clksrc_ctrl); + pcc = readl_relaxed(prcm_clksrc_ctrl); - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + writel_relaxed(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); } unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c index f467d072cd02..58dd3a9b726c 100644 --- a/arch/arm/mach-omap2/clkt2xxx_sys.c +++ b/arch/arm/mach-omap2/clkt2xxx_sys.c @@ -33,7 +33,7 @@ u32 omap2xxx_get_sysclkdiv(void) { u32 div; - div = __raw_readl(prcm_clksrc_ctrl); + div = readl_relaxed(prcm_clksrc_ctrl); div &= OMAP_SYSCLKDIV_MASK; div >>= OMAP_SYSCLKDIV_SHIFT; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f17f00697cc0..82c37b1becc4 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -18,7 +18,6 @@ #include "powerdomain.h" #include "clock.h" -#include "omap_hwmod.h" /* * Clockdomain flags @@ -98,6 +97,8 @@ struct clkdm_dep { /* Possible flags for struct clockdomain._flags */ #define _CLKDM_FLAG_HWSUP_ENABLED BIT(0) +struct omap_hwmod; + /** * struct clockdomain - OMAP clockdomain * @name: clockdomain name diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index ce25abbcffae..8be6ea50c092 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -18,9 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "soc.h" -#include "iomap.h" -#include "common.h" #include "prm2xxx.h" #include "cm.h" #include "cm2xxx.h" @@ -390,7 +387,7 @@ void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm) tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1); - if (cpu_is_omap2430()) + if (mdm) omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL); } @@ -405,19 +402,11 @@ static struct cm_ll_data omap2xxx_cm_ll_data = { int __init omap2xxx_cm_init(void) { - if (!cpu_is_omap24xx()) - return 0; - return cm_register(&omap2xxx_cm_ll_data); } static void __exit omap2xxx_cm_exit(void) { - if (!cpu_is_omap24xx()) - return; - - /* Should never happen */ - WARN(cm_unregister(&omap2xxx_cm_ll_data), - "%s: cm_ll_data function pointer mismatch\n", __func__); + cm_unregister(&omap2xxx_cm_ll_data); } __exitcall(omap2xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index bfbd16fe9151..72928a3ce2aa 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -52,12 +52,12 @@ static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx) { - return __raw_readl(cm_base + module + idx); + return readl_relaxed(cm_base + module + idx); } static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) { - __raw_writel(val, cm_base + module + idx); + writel_relaxed(val, cm_base + module + idx); } /* Read-modify-write a register in a CM module. Caller must lock */ diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 40a22e5649ae..b3f99e93def0 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -50,13 +50,13 @@ /* Read a register in a CM instance */ static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx) { - return __raw_readl(cm_base + inst + idx); + return readl_relaxed(cm_base + inst + idx); } /* Write into a register in a CM */ static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx) { - __raw_writel(val, cm_base + inst + idx); + writel_relaxed(val, cm_base + inst + idx); } /* Read-modify-write a register in CM */ diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index cfb8891b0c0e..15a778ce7707 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -17,11 +17,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H #define __ARCH_ARM_MACH_OMAP2_CM_33XX_H -#include "common.h" - #include "cm.h" #include "cm-regbits-33xx.h" -#include "iomap.h" /* CM base address */ #define AM33XX_CM_BASE 0x44e00000 diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index f6f028867bfe..129a4e7f6ef5 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -18,9 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "soc.h" -#include "iomap.h" -#include "common.h" #include "prm2xxx_3xxx.h" #include "cm.h" #include "cm3xxx.h" @@ -388,7 +385,8 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1); cm_context.iva2_cm_clksel2 = omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2); - cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG); + cm_context.cm_sysconfig = + omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_SYSCONFIG); cm_context.sgx_cm_clksel = omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL); cm_context.dss_cm_clksel = @@ -418,7 +416,8 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5); cm_context.pll_cm_clken2 = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2); - cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL); + cm_context.cm_polctrl = + omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_POLCTRL); cm_context.iva2_cm_fclken = omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN); cm_context.iva2_cm_clken_pll = @@ -519,7 +518,8 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD, CM_CLKSEL2); - __raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG); + omap2_cm_write_mod_reg(cm_context.cm_sysconfig, OCP_MOD, + OMAP3430_CM_SYSCONFIG); omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD, CM_CLKSEL); omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD, @@ -547,7 +547,8 @@ void omap3_cm_restore_context(void) OMAP3430ES2_CM_CLKSEL5); omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD, OMAP3430ES2_CM_CLKEN2); - __raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL); + omap2_cm_write_mod_reg(cm_context.cm_polctrl, OCP_MOD, + OMAP3430_CM_POLCTRL); omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD, CM_FCLKEN); omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD, @@ -669,19 +670,11 @@ static struct cm_ll_data omap3xxx_cm_ll_data = { int __init omap3xxx_cm_init(void) { - if (!cpu_is_omap34xx()) - return 0; - return cm_register(&omap3xxx_cm_ll_data); } static void __exit omap3xxx_cm_exit(void) { - if (!cpu_is_omap34xx()) - return; - - /* Should never happen */ - WARN(cm_unregister(&omap3xxx_cm_ll_data), - "%s: cm_ll_data function pointer mismatch\n", __func__); + cm_unregister(&omap3xxx_cm_ll_data); } __exitcall(omap3xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index 8224c91b4d7a..7a16b5598127 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -29,9 +29,8 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_SYSCONFIG 0x0010 +#define OMAP3430_CM_POLCTRL 0x009c #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c index 535d66e2822c..fe5cc7bae489 100644 --- a/arch/arm/mach-omap2/cm44xx.c +++ b/arch/arm/mach-omap2/cm44xx.c @@ -18,35 +18,32 @@ #include <linux/err.h> #include <linux/io.h> -#include "iomap.h" -#include "common.h" #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" -#include "cm-regbits-44xx.h" /* CM1 hardware module low-level functions */ /* Read a register in CM1 */ u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg)); + return readl_relaxed(cm_base + inst + reg); } /* Write into a register in CM1 */ void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg)); + writel_relaxed(val, cm_base + inst + reg); } /* Read a register in CM2 */ u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg)); + return readl_relaxed(cm2_base + inst + reg); } /* Write into a register in CM2 */ void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg)); + writel_relaxed(val, cm2_base + inst + reg); } diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 40b3b5a84458..8f6c4710877e 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -14,11 +14,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> +#include <linux/bug.h> #include "cm2xxx.h" #include "cm3xxx.h" #include "cm44xx.h" -#include "common.h" /* * cm_ll_data: function pointers to SoC-specific implementations of diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index f5c4731b6f06..12aca56942c0 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -21,8 +21,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "iomap.h" -#include "common.h" #include "clockdomain.h" #include "cm.h" #include "cm1_44xx.h" @@ -30,12 +28,18 @@ #include "cm44xx.h" #include "cminst44xx.h" #include "cm-regbits-34xx.h" -#include "cm-regbits-44xx.h" #include "prcm44xx.h" #include "prm44xx.h" #include "prcm_mpu44xx.h" #include "prcm-common.h" +#define OMAP4430_IDLEST_SHIFT 16 +#define OMAP4430_IDLEST_MASK (0x3 << 16) +#define OMAP4430_CLKTRCTRL_SHIFT 0 +#define OMAP4430_CLKTRCTRL_MASK (0x3 << 0) +#define OMAP4430_MODULEMODE_SHIFT 0 +#define OMAP4430_MODULEMODE_MASK (0x3 << 0) + /* * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield: * @@ -116,7 +120,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_cm_bases[part]); - return __raw_readl(_cm_bases[part] + inst + idx); + return readl_relaxed(_cm_bases[part] + inst + idx); } /* Write into a register in a CM instance */ @@ -125,7 +129,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_cm_bases[part]); - __raw_writel(val, _cm_bases[part] + inst + idx); + writel_relaxed(val, _cm_bases[part] + inst + idx); } /* Read-modify-write a register in CM1. Caller must lock */ diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index d88aff7baff8..ff029737c8f0 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -91,6 +91,7 @@ extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); +int omap_l2_cache_init(void); extern void omap5_realtime_timer_init(void); void omap2420_init_early(void); diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 44bb4d544dcf..751f3549bf6f 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -151,32 +151,32 @@ void __iomem *omap_ctrl_base_get(void) u8 omap_ctrl_readb(u16 offset) { - return __raw_readb(OMAP_CTRL_REGADDR(offset)); + return readb_relaxed(OMAP_CTRL_REGADDR(offset)); } u16 omap_ctrl_readw(u16 offset) { - return __raw_readw(OMAP_CTRL_REGADDR(offset)); + return readw_relaxed(OMAP_CTRL_REGADDR(offset)); } u32 omap_ctrl_readl(u16 offset) { - return __raw_readl(OMAP_CTRL_REGADDR(offset)); + return readl_relaxed(OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writeb(u8 val, u16 offset) { - __raw_writeb(val, OMAP_CTRL_REGADDR(offset)); + writeb_relaxed(val, OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writew(u16 val, u16 offset) { - __raw_writew(val, OMAP_CTRL_REGADDR(offset)); + writew_relaxed(val, OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writel(u32 val, u16 offset) { - __raw_writel(val, OMAP_CTRL_REGADDR(offset)); + writel_relaxed(val, OMAP_CTRL_REGADDR(offset)); } /* @@ -188,12 +188,12 @@ void omap_ctrl_writel(u32 val, u16 offset) u32 omap4_ctrl_pad_readl(u16 offset) { - return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset)); + return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset)); } void omap4_ctrl_pad_writel(u32 val, u16 offset) { - __raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset)); + writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset)); } #ifdef CONFIG_ARCH_OMAP3 @@ -222,7 +222,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode) * * XXX This should use some omap_ctrl_writel()-type function */ - __raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); + writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); } #endif @@ -285,7 +285,7 @@ void omap3_clear_scratchpad_contents(void) if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & OMAP3430_GLOBAL_COLD_RST_MASK) { for ( ; offset <= max_offset; offset += 0x4) - __raw_writel(0x0, (v_addr + offset)); + writel_relaxed(0x0, (v_addr + offset)); omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK, OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET); diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 01fc710c8181..2498ab025fa2 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -14,6 +14,7 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/export.h> +#include <linux/clockchips.h> #include <asm/cpuidle.h> #include <asm/proc-fns.h> @@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, { struct idle_statedata *cx = state_ptr + index; u32 mpuss_can_lose_context = 0; + int cpu_id = smp_processor_id(); /* * CPU0 has to wait and stay ON until CPU1 is OFF state. @@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) && (cx->mpu_logic_state == PWRDM_POWER_OFF); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); + /* * Call idle CPU PM enter notifier chain so that * VFP and per CPU interrupt context is saved. @@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, if (dev->cpu == 0 && mpuss_can_lose_context) cpu_cluster_pm_exit(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + fail: cpuidle_coupled_parallel_barrier(dev, &abort_barrier); cpu_done[dev->cpu] = false; @@ -172,6 +178,16 @@ fail: return index; } +/* + * For each cpu, setup the broadcast timer because local timers + * stops for the states above C1. + */ +static void omap_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + static struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, @@ -189,8 +205,7 @@ static struct cpuidle_driver omap4_idle_driver = { /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED | - CPUIDLE_FLAG_TIMER_STOP, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, .enter = omap_enter_idle_coupled, .name = "C2", .desc = "CPUx OFF, MPUSS CSWR", @@ -199,8 +214,7 @@ static struct cpuidle_driver omap4_idle_driver = { /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ .exit_latency = 460 + 518, .target_residency = 1100, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED | - CPUIDLE_FLAG_TIMER_STOP, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, .enter = omap_enter_idle_coupled, .name = "C3", .desc = "CPUx OFF, MPUSS OSWR", @@ -231,5 +245,8 @@ int __init omap4_idle_init(void) if (!cpu_clkdm[0] || !cpu_clkdm[1]) return -ENODEV; + /* Configure the broadcast timer on each cpu */ + on_each_cpu(omap_setup_broadcast_timer, NULL, 1); + return cpuidle_register(&omap4_idle_driver, cpu_online_mask); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e58609b312c7..592ba0a0ecf3 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/omap4-keypad.h> #include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> @@ -29,7 +28,6 @@ #include "iomap.h" #include "omap_hwmod.h" #include "omap_device.h" -#include "omap4-keypad.h" #include "soc.h" #include "common.h" @@ -255,37 +253,6 @@ static inline void omap_init_camera(void) #endif } -int __init omap4_keyboard_init(struct omap4_keypad_platform_data - *sdp4430_keypad_data, struct omap_board_data *bdata) -{ - struct platform_device *pdev; - struct omap_hwmod *oh; - struct omap4_keypad_platform_data *keypad_data; - unsigned int id = -1; - char *oh_name = "kbd"; - char *name = "omap4-keypad"; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -ENODEV; - } - - keypad_data = sdp4430_keypad_data; - - pdev = omap_device_build(name, id, oh, keypad_data, - sizeof(struct omap4_keypad_platform_data)); - - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", - name, oh->name); - return PTR_ERR(pdev); - } - oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); - - return 0; -} - #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 16d33d831287..bf852d7ae951 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -279,6 +279,8 @@ static enum omapdss_version __init omap_display_get_version(void) return OMAPDSS_VER_OMAP4; else if (soc_is_omap54xx()) return OMAPDSS_VER_OMAP5; + else if (soc_is_am43xx()) + return OMAPDSS_VER_AM43xx; else return OMAPDSS_VER_UNKNOWN; } @@ -555,65 +557,9 @@ int omap_dss_reset(struct omap_hwmod *oh) return r; } -/* list of 'compatible' nodes to convert to omapdss specific */ -static const char * const dss_compat_conv_list[] __initconst = { - "composite-connector", - "dvi-connector", - "hdmi-connector", - "panel-dpi", - "panel-dsi-cm", - "sony,acx565akm", - "svideo-connector", - "ti,tfp410", - "ti,tpd12s015", -}; - -/* prepend compatible string with "omapdss," */ -static __init void omapdss_omapify_node(struct device_node *node, - const char *compat) -{ - char *new_compat; - struct property *prop; - - new_compat = kasprintf(GFP_KERNEL, "omapdss,%s", compat); - - prop = kzalloc(sizeof(*prop), GFP_KERNEL); - - if (!prop) { - pr_err("omapdss_omapify_node: kzalloc failed\n"); - return; - } - - prop->name = "compatible"; - prop->value = new_compat; - prop->length = strlen(new_compat) + 1; - - of_update_property(node, prop); -} - -/* - * As omapdss panel drivers are omapdss specific, but we want to define the - * DT-data in generic manner, we convert the compatible strings of the panel - * nodes from "panel-foo" to "omapdss,panel-foo". This way we can have both - * correct DT data and omapdss specific drivers. - * - * When we get generic panel drivers to the kernel, this will be removed. - */ void __init omapdss_early_init_of(void) { - int i; - - for (i = 0; i < ARRAY_SIZE(dss_compat_conv_list); ++i) { - const char *compat = dss_compat_conv_list[i]; - struct device_node *node = NULL; - - while ((node = of_find_compatible_node(node, NULL, compat))) { - if (!of_device_is_available(node)) - continue; - omapdss_omapify_node(node, compat); - } - } } struct device_node * __init omapdss_find_dss_of_node(void) @@ -632,6 +578,10 @@ struct device_node * __init omapdss_find_dss_of_node(void) if (node) return node; + node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss"); + if (node) + return node; + return NULL; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 5689c88d986d..a6d2cf1f8d02 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -91,7 +91,7 @@ static inline void dma_write(u32 val, int reg, int lch) addr += reg_map[reg].offset; addr += reg_map[reg].stride * lch; - __raw_writel(val, addr); + writel_relaxed(val, addr); } static inline u32 dma_read(int reg, int lch) @@ -101,7 +101,7 @@ static inline u32 dma_read(int reg, int lch) addr += reg_map[reg].offset; addr += reg_map[reg].stride * lch; - return __raw_readl(addr); + return readl_relaxed(addr); } static void omap2_clear_dma(int lch) diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4349e82debfe..17cd39360afe 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -46,7 +46,7 @@ static struct platform_device gpmc_nand_device = { static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) { /* platforms which support all ECC schemes */ - if (soc_is_am33xx() || cpu_is_omap44xx() || + if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) return 1; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 9fe8c949305c..2c0c2816900f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -68,6 +68,9 @@ #define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ #define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ #define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_4 0x300 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_5 0x304 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_6 0x308 /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -170,12 +173,12 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev); static void gpmc_write_reg(int idx, u32 val) { - __raw_writel(val, gpmc_base + idx); + writel_relaxed(val, gpmc_base + idx); } static u32 gpmc_read_reg(int idx) { - return __raw_readl(gpmc_base + idx); + return readl_relaxed(gpmc_base + idx); } void gpmc_cs_write_reg(int cs, int idx, u32 val) @@ -183,7 +186,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) void __iomem *reg_addr; reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - __raw_writel(val, reg_addr); + writel_relaxed(val, reg_addr); } static u32 gpmc_cs_read_reg(int cs, int idx) @@ -191,7 +194,7 @@ static u32 gpmc_cs_read_reg(int cs, int idx) void __iomem *reg_addr; reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return __raw_readl(reg_addr); + return readl_relaxed(reg_addr); } /* TODO: Add support for gpmc_fck to clock framework and use it */ @@ -677,6 +680,12 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) GPMC_BCH_SIZE * i; reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result4[i] = gpmc_base + GPMC_ECC_BCH_RESULT_4 + + i * GPMC_BCH_SIZE; + reg->gpmc_bch_result5[i] = gpmc_base + GPMC_ECC_BCH_RESULT_5 + + i * GPMC_BCH_SIZE; + reg->gpmc_bch_result6[i] = gpmc_base + GPMC_ECC_BCH_RESULT_6 + + i * GPMC_BCH_SIZE; } } @@ -1412,6 +1421,12 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, else gpmc_nand_data->ecc_opt = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW; + else if (!strcmp(s, "bch16")) + if (gpmc_nand_data->elm_of_node) + gpmc_nand_data->ecc_opt = + OMAP_ECC_BCH16_CODE_HW; + else + pr_err("%s: BCH16 requires ELM support\n", __func__); else pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__); diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index cbc8e3c480e0..f78b4a161959 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -76,6 +76,7 @@ int omap_hdq1w_reset(struct omap_hwmod *oh) return 0; } +#ifndef CONFIG_OF static int __init omap_init_hdq(void) { int id = -1; @@ -95,3 +96,4 @@ static int __init omap_init_hdq(void) return 0; } omap_arch_initcall(omap_init_hdq); +#endif diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 157412e4273a..43969da5d50b 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -94,7 +94,7 @@ EXPORT_SYMBOL(omap_type); #define OMAP_TAP_DIE_ID_44XX_2 0x020c #define OMAP_TAP_DIE_ID_44XX_3 0x0210 -#define read_tap_reg(reg) __raw_readl(tap_base + (reg)) +#define read_tap_reg(reg) readl_relaxed(tap_base + (reg)) struct omap_id { u16 hawkeye; /* Silicon type (Hawkeye id) */ @@ -628,6 +628,41 @@ void __init omap5xxx_check_revision(void) pr_info("%s %s\n", soc_name, soc_rev); } +void __init dra7xxx_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + switch (hawkeye) { + case 0xb990: + switch (rev) { + case 0: + omap_revision = DRA752_REV_ES1_0; + break; + case 1: + default: + omap_revision = DRA752_REV_ES1_1; + } + break; + + default: + /* Unknown default to latest silicon rev as default*/ + pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", + __func__, idcode, hawkeye, rev); + omap_revision = DRA752_REV_ES1_1; + } + + sprintf(soc_name, "DRA%03x", omap_rev() >> 16); + sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf, + (omap_rev() >> 8) & 0xf); + + pr_info("%s %s\n", soc_name, soc_rev); +} + /* * Set up things for map_io and processor detection later on. Gets called * pretty much first thing from board init. For multi-omap, this gets @@ -669,6 +704,8 @@ static const char * __init omap_get_family(void) return kasprintf(GFP_KERNEL, "OMAP5"); else if (soc_is_am43xx()) return kasprintf(GFP_KERNEL, "AM43xx"); + else if (soc_is_dra7xx()) + return kasprintf(GFP_KERNEL, "DRA7"); else return kasprintf(GFP_KERNEL, "Unknown"); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index f14f9ac2dca1..8f559450c876 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -609,6 +609,7 @@ void __init am43xx_init_early(void) am43xx_clockdomains_init(); am43xx_hwmod_init(); omap_hwmod_init_postsetup(); + omap_l2_cache_init(); omap_clk_soc_init = am43xx_dt_clk_init; } @@ -640,6 +641,7 @@ void __init omap4430_init_early(void) omap44xx_clockdomains_init(); omap44xx_hwmod_init(); omap_hwmod_init_postsetup(); + omap_l2_cache_init(); omap_clk_soc_init = omap4xxx_dt_clk_init; } @@ -693,6 +695,7 @@ void __init dra7xx_init_early(void) omap_prm_base_init(); omap_cm_base_init(); omap44xx_prm_init(); + dra7xxx_check_revision(); dra7xx_powerdomains_init(); dra7xx_clockdomains_init(); dra7xx_hwmod_init(); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 6037a9a01ed5..35b8590c322e 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -83,12 +83,12 @@ struct omap3_intc_regs { static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) { - __raw_writel(val, bank->base_reg + reg); + writel_relaxed(val, bank->base_reg + reg); } static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) { - return __raw_readl(bank->base_reg + reg); + return readl_relaxed(bank->base_reg + reg); } /* XXX: FIQ and additional INTC support (only MPU at the moment) */ diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 48094b58c88f..fd88edeb027f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -70,18 +70,18 @@ struct omap_mux_partition *omap_mux_get(const char *name) u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg) { if (partition->flags & OMAP_MUX_REG_8BIT) - return __raw_readb(partition->base + reg); + return readb_relaxed(partition->base + reg); else - return __raw_readw(partition->base + reg); + return readw_relaxed(partition->base + reg); } void omap_mux_write(struct omap_mux_partition *partition, u16 val, u16 reg) { if (partition->flags & OMAP_MUX_REG_8BIT) - __raw_writeb(val, partition->base + reg); + writeb_relaxed(val, partition->base + reg); else - __raw_writew(val, partition->base + reg); + writew_relaxed(val, partition->base + reg); } void omap_mux_write_array(struct omap_mux_partition *partition, diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 40c5d5f1451c..4993d4bfe9b2 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -31,10 +31,6 @@ * register AuxCoreBoot0. */ ENTRY(omap5_secondary_startup) -.arm -THUMB( adr r9, BSYM(wait) ) @ CPU may be entered in ARM mode. -THUMB( bx r9 ) @ If this is a Thumb-2 kernel, -THUMB( .thumb ) @ switch to Thumb now. wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 ldr r0, [r2] mov r0, r0, lsr #5 @@ -43,7 +39,7 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 cmp r0, r4 bne wait b secondary_startup -END(omap5_secondary_startup) +ENDPROC(omap5_secondary_startup) /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 458f72f9dc8f..971791fe9a3f 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -39,7 +39,7 @@ void __ref omap4_cpu_die(unsigned int cpu) if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) pr_err("Secure clear status failed\n"); } else { - __raw_writel(0, base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(0, base + OMAP_AUX_CORE_BOOT_0); } @@ -53,7 +53,7 @@ void __ref omap4_cpu_die(unsigned int cpu) boot_cpu = omap_read_auxcoreboot0(); else boot_cpu = - __raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5; + readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5; if (boot_cpu == smp_processor_id()) { /* diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 667915d236f3..4001325f90fb 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -116,7 +116,7 @@ static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - __raw_writel(addr, pm_info->wkup_sar_addr); + writel_relaxed(addr, pm_info->wkup_sar_addr); } /* @@ -141,7 +141,7 @@ static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state) break; } - __raw_writel(scu_pwr_st, pm_info->scu_sar_addr); + writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr); } /* Helper functions for MPUSS OSWR */ @@ -179,7 +179,7 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - __raw_writel(save_state, pm_info->l2x0_sar_addr); + writel_relaxed(save_state, pm_info->l2x0_sar_addr); } /* @@ -187,19 +187,15 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state) * in every restore MPUSS OFF path. */ #ifdef CONFIG_CACHE_L2X0 -static void save_l2x0_context(void) +static void __init save_l2x0_context(void) { - u32 val; - void __iomem *l2x0_base = omap4_get_l2cache_base(); - if (l2x0_base) { - val = __raw_readl(l2x0_base + L2X0_AUX_CTRL); - __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET); - val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL); - __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET); - } + writel_relaxed(l2x0_saved_regs.aux_ctrl, + sar_base + L2X0_AUXCTRL_OFFSET); + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + sar_base + L2X0_PREFETCH_CTRL_OFFSET); } #else -static void save_l2x0_context(void) +static void __init save_l2x0_context(void) {} #endif @@ -386,9 +382,9 @@ int __init omap4_mpuss_init(void) /* Save device type on scratchpad for low level code to use */ if (omap_type() != OMAP2_DEVICE_TYPE_GP) - __raw_writel(1, sar_base + OMAP_TYPE_OFFSET); + writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET); else - __raw_writel(0, sar_base + OMAP_TYPE_OFFSET); + writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET); save_l2x0_context(); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 17550aa39d0f..256e84ef0f67 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -99,7 +99,7 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) if (omap_secure_apis_support()) omap_modify_auxcoreboot0(0x200, 0xfffffdff); else - __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0); if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); @@ -227,8 +227,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) if (omap_secure_apis_support()) omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else - __raw_writel(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); + writel_relaxed(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); } diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 693fe486e917..37843a7d3639 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -60,19 +60,19 @@ static unsigned int omap_secure_apis; */ static inline u32 wakeupgen_readl(u8 idx, u32 cpu) { - return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 + + return readl_relaxed(wakeupgen_base + OMAP_WKG_ENB_A_0 + (cpu * CPU_ENA_OFFSET) + (idx * 4)); } static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu) { - __raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 + + writel_relaxed(val, wakeupgen_base + OMAP_WKG_ENB_A_0 + (cpu * CPU_ENA_OFFSET) + (idx * 4)); } static inline void sar_writel(u32 val, u32 offset, u8 idx) { - __raw_writel(val, sar_base + offset + (idx * 4)); + writel_relaxed(val, sar_base + offset + (idx * 4)); } static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index) @@ -231,21 +231,21 @@ static inline void omap4_irq_save_context(void) } /* Save AuxBoot* registers */ - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_1); - __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + AUXCOREBOOT0_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_1); + writel_relaxed(val, sar_base + AUXCOREBOOT1_OFFSET); /* Save SyncReq generation logic */ - val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK); - __raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN); - __raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_MASK); + writel_relaxed(val, sar_base + PTMSYNCREQ_MASK_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_EN); + writel_relaxed(val, sar_base + PTMSYNCREQ_EN_OFFSET); /* Set the Backup Bit Mask status */ - val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); + val = readl_relaxed(sar_base + SAR_BACKUP_STATUS_OFFSET); val |= SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); + writel_relaxed(val, sar_base + SAR_BACKUP_STATUS_OFFSET); } @@ -264,15 +264,15 @@ static inline void omap5_irq_save_context(void) } /* Save AuxBoot* registers */ - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET); /* Set the Backup Bit Mask status */ - val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + val = readl_relaxed(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); val |= SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + writel_relaxed(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); } @@ -306,9 +306,9 @@ static void irq_sar_clear(void) if (soc_is_omap54xx()) offset = OMAP5_SAR_BACKUP_STATUS_OFFSET; - val = __raw_readl(sar_base + offset); + val = readl_relaxed(sar_base + offset); val &= ~SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + offset); + writel_relaxed(val, sar_base + offset); } /* diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 95e171a055f3..326cd982a3cb 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -125,25 +125,25 @@ void __init gic_init_irq(void) void gic_dist_disable(void) { if (gic_dist_base_addr) - __raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL); + writel_relaxed(0x0, gic_dist_base_addr + GIC_DIST_CTRL); } void gic_dist_enable(void) { if (gic_dist_base_addr) - __raw_writel(0x1, gic_dist_base_addr + GIC_DIST_CTRL); + writel_relaxed(0x1, gic_dist_base_addr + GIC_DIST_CTRL); } bool gic_dist_disabled(void) { - return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); + return !(readl_relaxed(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); } void gic_timer_retrigger(void) { - u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT); - u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET); - u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + u32 twd_int = readl_relaxed(twd_base + TWD_TIMER_INTSTAT); + u32 gic_int = readl_relaxed(gic_dist_base_addr + GIC_DIST_PENDING_SET); + u32 twd_ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL); if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) { /* @@ -151,11 +151,11 @@ void gic_timer_retrigger(void) * disabled. Ack the pending interrupt, and retrigger it. */ pr_warn("%s: lost localtimer interrupt\n", __func__); - __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT); if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) { - __raw_writel(1, twd_base + TWD_TIMER_COUNTER); + writel_relaxed(1, twd_base + TWD_TIMER_COUNTER); twd_ctrl |= TWD_TIMER_CONTROL_ENABLE; - __raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL); + writel_relaxed(twd_ctrl, twd_base + TWD_TIMER_CONTROL); } } } @@ -167,75 +167,57 @@ void __iomem *omap4_get_l2cache_base(void) return l2cache_base; } -static void omap4_l2x0_disable(void) +static void omap4_l2c310_write_sec(unsigned long val, unsigned reg) { - outer_flush_all(); - /* Disable PL310 L2 Cache controller */ - omap_smc1(0x102, 0x0); -} + unsigned smc_op; -static void omap4_l2x0_set_debug(unsigned long val) -{ - /* Program PL310 L2 Cache controller debug register */ - omap_smc1(0x100, val); + switch (reg) { + case L2X0_CTRL: + smc_op = OMAP4_MON_L2X0_CTRL_INDEX; + break; + + case L2X0_AUX_CTRL: + smc_op = OMAP4_MON_L2X0_AUXCTRL_INDEX; + break; + + case L2X0_DEBUG_CTRL: + smc_op = OMAP4_MON_L2X0_DBG_CTRL_INDEX; + break; + + case L310_PREFETCH_CTRL: + smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX; + break; + + default: + WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg); + return; + } + + omap_smc1(smc_op, val); } -static int __init omap_l2_cache_init(void) +int __init omap_l2_cache_init(void) { - u32 aux_ctrl = 0; - - /* - * To avoid code running on other OMAPs in - * multi-omap builds - */ - if (!cpu_is_omap44xx()) - return -ENODEV; + u32 aux_ctrl; /* Static mapping, never released */ l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K); if (WARN_ON(!l2cache_base)) return -ENOMEM; - /* - * 16-way associativity, parity disabled - * Way size - 32KB (es1.0) - * Way size - 64KB (es2.0 +) - */ - aux_ctrl = ((1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) | - (0x1 << 25) | - (0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) | - (0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT)); - - if (omap_rev() == OMAP4430_REV_ES1_0) { - aux_ctrl |= 0x2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT; - } else { - aux_ctrl |= ((0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | - (1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) | - (1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) | - (1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) | - (1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT)); - } - if (omap_rev() != OMAP4430_REV_ES1_0) - omap_smc1(0x109, aux_ctrl); - - /* Enable PL310 L2 Cache controller */ - omap_smc1(0x102, 0x1); + /* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */ + aux_ctrl = L2C_AUX_CTRL_SHARED_OVERRIDE | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH; + outer_cache.write_sec = omap4_l2c310_write_sec; if (of_have_populated_dt()) - l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); + l2x0_of_init(aux_ctrl, 0xcf9fffff); else - l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); - - /* - * Override default outer_cache.disable with a OMAP4 - * specific one - */ - outer_cache.disable = omap4_l2x0_disable; - outer_cache.set_debug = omap4_l2x0_set_debug; + l2x0_init(l2cache_base, aux_ctrl, 0xcf9fffff); return 0; } -omap_early_initcall(omap_l2_cache_init); #endif void __iomem *omap4_get_sar_ram_base(void) diff --git a/arch/arm/mach-omap2/omap4-keypad.h b/arch/arm/mach-omap2/omap4-keypad.h deleted file mode 100644 index 20de0d5a7e77..000000000000 --- a/arch/arm/mach-omap2/omap4-keypad.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H -#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H - -struct omap_board_data; - -extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, - struct omap_board_data *); -#endif diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 66c60fe1104c..f7bb435bb543 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -72,7 +72,7 @@ * | (../mach-omap2/omap_hwmod*) | * +-------------------------------+ * | OMAP clock/PRCM/register fns | - * | (__raw_{read,write}l, clk*) | + * | ({read,write}l_relaxed, clk*) | * +-------------------------------+ * * Device drivers should not contain any OMAP-specific code or data in @@ -3230,17 +3230,17 @@ static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh, u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) { if (oh->flags & HWMOD_16BIT_REG) - return __raw_readw(oh->_mpu_rt_va + reg_offs); + return readw_relaxed(oh->_mpu_rt_va + reg_offs); else - return __raw_readl(oh->_mpu_rt_va + reg_offs); + return readl_relaxed(oh->_mpu_rt_va + reg_offs); } void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) { if (oh->flags & HWMOD_16BIT_REG) - __raw_writew(v, oh->_mpu_rt_va + reg_offs); + writew_relaxed(v, oh->_mpu_rt_va + reg_offs); else - __raw_writel(v, oh->_mpu_rt_va + reg_offs); + writel_relaxed(v, oh->_mpu_rt_va + reg_offs); } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 0f178623e7da..a579b89ce9b7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -24,6 +24,7 @@ #include "prm33xx.h" #include "omap_hwmod_33xx_43xx_common_data.h" #include "prcm43xx.h" +#include "common.h" #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 71ac7d5f3385..1cd0cfdc03e0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3689,12 +3689,9 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE | - SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 1219280bb976..41e54f759934 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3635,15 +3635,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_dmic_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> dmic (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_dmic_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* dsp -> iva */ @@ -4209,15 +4201,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp1_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp1 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp1_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> mcbsp2 */ @@ -4225,15 +4209,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp2_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp2 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp2_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> mcbsp3 */ @@ -4241,15 +4217,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp3_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp3 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp3_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> mcbsp4 */ @@ -4265,15 +4233,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcpdm_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcpdm (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcpdm_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> mcspi1 */ @@ -4575,15 +4535,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer5_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer5 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer5_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer6 */ @@ -4591,15 +4543,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer6_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer6 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer6_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer7 */ @@ -4607,15 +4551,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer7_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer7 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer7_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer8 */ @@ -4623,15 +4559,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer8_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer8 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer8_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> timer9 */ @@ -4831,7 +4759,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_instr__debugss, &omap44xx_l4_cfg__dma_system, &omap44xx_l4_abe__dmic, - &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, @@ -4874,14 +4801,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__mcasp, &omap44xx_l4_abe__mcasp_dma, &omap44xx_l4_abe__mcbsp1, - &omap44xx_l4_abe__mcbsp1_dma, &omap44xx_l4_abe__mcbsp2, - &omap44xx_l4_abe__mcbsp2_dma, &omap44xx_l4_abe__mcbsp3, - &omap44xx_l4_abe__mcbsp3_dma, &omap44xx_l4_per__mcbsp4, &omap44xx_l4_abe__mcpdm, - &omap44xx_l4_abe__mcpdm_dma, &omap44xx_l4_per__mcspi1, &omap44xx_l4_per__mcspi2, &omap44xx_l4_per__mcspi3, @@ -4913,13 +4836,9 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__timer3, &omap44xx_l4_per__timer4, &omap44xx_l4_abe__timer5, - &omap44xx_l4_abe__timer5_dma, &omap44xx_l4_abe__timer6, - &omap44xx_l4_abe__timer6_dma, &omap44xx_l4_abe__timer7, - &omap44xx_l4_abe__timer7_dma, &omap44xx_l4_abe__timer8, - &omap44xx_l4_abe__timer8_dma, &omap44xx_l4_per__timer9, &omap44xx_l4_per__timer10, &omap44xx_l4_per__timer11, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 892317294fdc..290213f2cbe3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -334,6 +334,235 @@ static struct omap_hwmod omap54xx_dmic_hwmod = { }; /* + * 'dss' class + * display sub-system + */ +static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = { + .rev_offs = 0x0000, + .syss_offs = 0x0014, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class omap54xx_dss_hwmod_class = { + .name = "dss", + .sysc = &omap54xx_dss_sysc, + .reset = omap_dss_reset, +}; + +/* dss */ +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "32khz_clk", .clk = "dss_32khz_clk" }, + { .role = "sys_clk", .clk = "dss_sys_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_hwmod = { + .name = "dss_core", + .class = &omap54xx_dss_hwmod_class, + .clkdm_name = "dss_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap54xx_dispc_sysc, +}; + +/* dss_dispc */ +static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +/* dss_dispc dev_attr */ +static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = { + .has_framedonetv_irq = 1, + .manager_count = 4, +}; + +static struct omap_hwmod omap54xx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap54xx_dispc_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dispc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), + .dev_attr = &dss_dispc_dev_attr, +}; + +/* + * 'dsi1' class + * display serial interface controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = { + .name = "dsi1", + .sysc = &omap54xx_dsi1_sysc, +}; + +/* dss_dsi1_a */ +static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = { + .name = "dss_dsi1", + .class = &omap54xx_dsi1_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dsi1_a_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks), +}; + +/* dss_dsi1_c */ +static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = { + .name = "dss_dsi2", + .class = &omap54xx_dsi1_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dsi1_c_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks), +}; + +/* + * 'hdmi' class + * hdmi controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = { + .name = "hdmi", + .sysc = &omap54xx_hdmi_sysc, +}; + +static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_hdmi_hwmod = { + .name = "dss_hdmi", + .class = &omap54xx_hdmi_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_48mhz_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_hdmi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap54xx_rfbi_sysc, +}; + +/* dss_rfbi */ +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "l3_iclk_div" }, +}; + +static struct omap_hwmod omap54xx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap54xx_rfbi_hwmod_class, + .clkdm_name = "dss_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), +}; + +/* * 'emif' class * external memory interface no1 (wrapper) */ @@ -895,7 +1124,7 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = { * current exception. */ - .flags = HWMOD_EXT_OPT_MAIN_CLK, + .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE, .main_clk = "pad_clks_ck", .prcm = { .omap4 = { @@ -1974,6 +2203,54 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = { .user = OCP_USER_MPU, }; +/* l3_main_2 -> dss */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dispc */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dispc_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dsi1_a */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dsi1_a_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dsi1_c */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dsi1_c_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_hdmi_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_rfbi_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* mpu -> emif1 */ static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { .master = &omap54xx_mpu_hwmod, @@ -2427,6 +2704,12 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__dma_system, &omap54xx_l4_abe__dmic, &omap54xx_l4_cfg__mmu_dsp, + &omap54xx_l3_main_2__dss, + &omap54xx_l3_main_2__dss_dispc, + &omap54xx_l3_main_2__dss_dsi1_a, + &omap54xx_l3_main_2__dss_dsi1_c, + &omap54xx_l3_main_2__dss_hdmi, + &omap54xx_l3_main_2__dss_rfbi, &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, &omap54xx_l4_wkup__gpio1, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 810c205d668b..20b4398cec05 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2318,21 +2318,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = { - { - .pa_start = 0x4a080000, - .pa_end = 0x4a08001f, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> ocp2scp1 */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = { .master = &dra7xx_l4_cfg_hwmod, .slave = &dra7xx_ocp2scp1_hwmod, .clk = "l4_root_clk_div", - .addr = dra7xx_ocp2scp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index eb8a25de67ed..50640b38f0bf 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -57,7 +57,7 @@ static int __init omap4430_phy_power_down(void) } /* Power down the phy */ - __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); + writel_relaxed(PHY_PD, ctrl_base + CONTROL_DEV_CONF); iounmap(ctrl_base); @@ -162,7 +162,7 @@ void ti81xx_musb_phy_power(u8 on) return; } - usbphycfg = __raw_readl(scm_base + USBCTRL0); + usbphycfg = readl_relaxed(scm_base + USBCTRL0); if (on) { if (cpu_is_ti816x()) { @@ -181,7 +181,7 @@ void ti81xx_musb_phy_power(u8 on) usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; } - __raw_writel(usbphycfg, scm_base + USBCTRL0); + writel_relaxed(usbphycfg, scm_base + USBCTRL0); iounmap(scm_base); } diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 615e5b1fb025..6bf626700557 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -46,15 +46,8 @@ static bool is_offset_valid; static u8 smps_offset; -/* - * Flag to ensure Smartreflex bit in TWL - * being cleared in board file is not overwritten. - */ -static bool __initdata twl_sr_enable_autoinit; -#define TWL4030_DCDC_GLOBAL_CFG 0x06 #define REG_SMPS_OFFSET 0xE0 -#define SMARTREFLEX_ENABLE BIT(3) static unsigned long twl4030_vsel_to_uv(const u8 vsel) { @@ -251,18 +244,6 @@ int __init omap3_twl_init(void) if (!cpu_is_omap34xx()) return -ENODEV; - /* - * The smartreflex bit on twl4030 specifies if the setting of voltage - * is done over the I2C_SR path. Since this setting is independent of - * the actual usage of smartreflex AVS module, we enable TWL SR bit - * by default irrespective of whether smartreflex AVS module is enabled - * on the OMAP side or not. This is because without this bit enabled, - * the voltage scaling through vp forceupdate/bypass mechanism of - * voltage scaling will not function on TWL over I2C_SR. - */ - if (!twl_sr_enable_autoinit) - omap3_twl_set_sr_bit(true); - voltdm = voltdm_lookup("mpu_iva"); omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic); @@ -271,44 +252,3 @@ int __init omap3_twl_init(void) return 0; } - -/** - * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL - * @enable: enable SR mode in twl or not - * - * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure - * voltage scaling through OMAP SR works. Else, the smartreflex bit - * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but - * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct - * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, - * in those scenarios this bit is to be cleared (enable = false). - * - * Returns 0 on success, error is returned if I2C read/write fails. - */ -int __init omap3_twl_set_sr_bit(bool enable) -{ - u8 temp; - int ret; - if (twl_sr_enable_autoinit) - pr_warning("%s: unexpected multiple calls\n", __func__); - - ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp, - TWL4030_DCDC_GLOBAL_CFG); - if (ret) - goto err; - - if (enable) - temp |= SMARTREFLEX_ENABLE; - else - temp &= ~SMARTREFLEX_ENABLE; - - ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp, - TWL4030_DCDC_GLOBAL_CFG); - if (!ret) { - twl_sr_enable_autoinit = true; - return 0; - } -err: - pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret); - return ret; -} diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index c3b73351cb7a..90c88d498485 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -226,6 +226,14 @@ static void __init am3517_evm_legacy_init(void) am35xx_emac_reset(); } +static struct platform_device omap3_rom_rng_device = { + .name = "omap3-rom-rng", + .id = -1, + .dev = { + .platform_data = rx51_secure_rng_call, + }, +}; + static void __init nokia_n900_legacy_init(void) { hsmmc2_internal_input_clk(); @@ -239,6 +247,10 @@ static void __init nokia_n900_legacy_init(void) pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n"); pr_warning("Thumb binaries may crash randomly without this workaround\n"); } + + pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + platform_device_register(&omap3_rom_rng_device); + } } #endif /* CONFIG_ARCH_OMAP3 */ @@ -254,6 +266,11 @@ static void __init omap4_panda_legacy_init(void) { legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53); } + +static void __init var_som_om44_legacy_init(void) +{ + legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41); +} #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) @@ -364,6 +381,8 @@ static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP4 { "ti,omap4-sdp", omap4_sdp_legacy_init, }, { "ti,omap4-panda", omap4_panda_legacy_init, }, + { "variscite,var-dvk-om44", var_som_om44_legacy_init, }, + { "variscite,var-stk-om44", var_som_om44_legacy_init, }, #endif #ifdef CONFIG_SOC_AM33XX { "ti,am335x-evmsk", am335x_evmsk_legacy_init, }, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index e1b41416fbf1..828aee9ea6a8 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -32,11 +32,13 @@ #include "pm.h" #include "twl-common.h" +#ifdef CONFIG_SUSPEND /* * omap_pm_suspend: points to a function that does the SoC-specific * suspend work */ -int (*omap_pm_suspend)(void); +static int (*omap_pm_suspend)(void); +#endif #ifdef CONFIG_PM /** @@ -243,6 +245,15 @@ static const struct platform_suspend_ops omap_pm_ops = { .valid = suspend_valid_only_mem, }; +/** + * omap_common_suspend_init - Set common suspend routines for OMAP SoCs + * @pm_suspend: function pointer to SoC specific suspend function + */ +void omap_common_suspend_init(void *pm_suspend) +{ + omap_pm_suspend = pm_suspend; + suspend_set_ops(&omap_pm_ops); +} #endif /* CONFIG_SUSPEND */ static void __init omap3_init_voltages(void) @@ -287,32 +298,24 @@ omap_postcore_initcall(omap2_common_pm_init); int __init omap2_common_pm_late_init(void) { - /* - * In the case of DT, the PMIC and SR initialization will be done using - * a completely different mechanism. - * Disable this part if a DT blob is available. - */ - if (!of_have_populated_dt()) { - - /* Init the voltage layer */ - omap_pmic_late_init(); - omap_voltage_late_init(); + if (of_have_populated_dt()) { + omap3_twl_init(); + omap4_twl_init(); + } - /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); + /* Init the voltage layer */ + omap_pmic_late_init(); + omap_voltage_late_init(); - /* Smartreflex device init */ - omap_devinit_smartreflex(); + /* Initialize the voltages */ + omap3_init_voltages(); + omap4_init_voltages(); - } + /* Smartreflex device init */ + omap_devinit_smartreflex(); /* cpufreq dummy device instantiation */ omap_init_cpufreq(); -#ifdef CONFIG_SUSPEND - suspend_set_ops(&omap_pm_ops); -#endif - return 0; } diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index d4d0fce325c7..e150102d6c06 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -34,7 +34,6 @@ extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); -extern int (*omap_pm_suspend)(void); #if defined(CONFIG_PM_OPP) extern int omap3_opp_init(void); @@ -147,4 +146,11 @@ static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = * static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { } #endif +#ifdef CONFIG_SUSPEND +void omap_common_suspend_init(void *pm_suspend); +#else +static inline void omap_common_suspend_init(void *pm_suspend) +{ +} +#endif /* CONFIG_SUSPEND */ #endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 8c0759496c8d..a5ea988ff340 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -229,9 +229,7 @@ static void __init prcm_setup_regs(void) clkdm_for_each(omap_pm_clkdms_setup, NULL); clkdm_add_wkdep(mpu_clkdm, wkup_clkdm); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap2_enter_full_retention; -#endif + omap_common_suspend_init(omap2_enter_full_retention); /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk * stabilisation */ diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 87099bb6de69..507d8eeaab95 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -50,6 +50,7 @@ #include "sdrc.h" #include "sram.h" #include "control.h" +#include "vc.h" /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -288,6 +289,9 @@ void omap_sram_idle(void) } } + /* Configure PMIC signaling for I2C4 or sys_off_mode */ + omap3_vc_set_pmic_signaling(core_next_state); + omap3_intc_prepare_idle(); /* @@ -391,7 +395,8 @@ restore: return ret; } - +#else +#define omap3_pm_suspend NULL #endif /* CONFIG_SUSPEND */ @@ -705,9 +710,7 @@ int __init omap3_pm_init(void) per_clkdm = clkdm_lookup("per_clkdm"); wkup_clkdm = clkdm_lookup("wkup_clkdm"); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap3_pm_suspend; -#endif + omap_common_suspend_init(omap3_pm_suspend); arm_pm_idle = omap3_pm_idle; omap3_idle_init(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index eefb30cfcabd..0dda6cf8b855 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -96,6 +96,8 @@ static int omap4_pm_suspend(void) return 0; } +#else +#define omap4_pm_suspend NULL #endif /* CONFIG_SUSPEND */ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) @@ -251,9 +253,7 @@ int __init omap4_pm_init(void) (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap4_pm_suspend; -#endif + omap_common_suspend_init(omap4_pm_suspend); /* Overwrite the default cpu_do_idle() */ arm_pm_idle = omap_default_idle; diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c index c0aeabfcf009..c40e5f009826 100644 --- a/arch/arm/mach-omap2/powerdomain-common.c +++ b/arch/arm/mach-omap2/powerdomain-common.c @@ -17,7 +17,6 @@ #include "pm.h" #include "cm.h" #include "cm-regbits-34xx.h" -#include "cm-regbits-44xx.h" #include "prm-regbits-34xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 93a2a6e4260f..faebd5f076af 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -32,6 +32,7 @@ #include "powerdomain.h" #include "clockdomain.h" +#include "voltage.h" #include "soc.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index da5a59ae77b6..f4727117f6cc 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -21,8 +21,6 @@ #include <linux/list.h> #include <linux/spinlock.h> -#include "voltage.h" - /* Powerdomain basic power states */ #define PWRDM_POWER_OFF 0x0 #define PWRDM_POWER_RET 0x1 @@ -75,6 +73,7 @@ struct clockdomain; struct powerdomain; +struct voltagedomain; /** * struct powerdomain - OMAP powerdomain diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 0e841fd9498a..a8e4b582c527 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -428,6 +428,28 @@ #define MAX_IOPAD_LATCH_TIME 100 # ifndef __ASSEMBLER__ +#include <linux/delay.h> + +/** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + */ +#define omap_test_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + /** * struct omap_prcm_irq - describes a PRCM interrupt bit * @name: a short name describing the interrupt type, e.g. "wkup" or "io" @@ -458,6 +480,7 @@ struct omap_prcm_irq { * @ocp_barrier: fn ptr to force buffered PRM writes to complete * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs * @restore_irqen: fn ptr to save and clear IRQENABLE regs + * @reconfigure_io_chain: fn ptr to reconfigure IO chain * @saved_mask: IRQENABLE regs are saved here during suspend * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init @@ -479,6 +502,7 @@ struct omap_prcm_irq_setup { void (*ocp_barrier)(void); void (*save_and_clear_irqen)(u32 *saved_mask); void (*restore_irqen)(u32 *saved_mask); + void (*reconfigure_io_chain)(void); u32 *saved_mask; u32 *priority_mask; int base_irq; diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index c30e44a7fab0..cdbee6326d29 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -30,12 +30,12 @@ void __iomem *prcm_mpu_base; u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); + return readl_relaxed(OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); } void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); + writel_relaxed(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); } u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 059bd4f49035..ac9cb4550239 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -26,7 +26,6 @@ #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H #include "prcm_mpu_44xx_54xx.h" -#include "common.h" #define OMAP4430_PRCM_MPU_BASE 0x48243000 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index cebad565ed37..106132db532b 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -123,8 +123,15 @@ #define OMAP3430_GLOBAL_SW_RST_SHIFT 1 #define OMAP3430_GLOBAL_COLD_RST_SHIFT 0 #define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0) -#define OMAP3430_SEL_OFF_MASK (1 << 3) -#define OMAP3430_AUTO_OFF_MASK (1 << 2) +#define OMAP3430_PRM_VOLTCTRL_SEL_VMODE (1 << 4) +#define OMAP3430_PRM_VOLTCTRL_SEL_OFF (1 << 3) +#define OMAP3430_PRM_VOLTCTRL_AUTO_OFF (1 << 2) +#define OMAP3430_PRM_VOLTCTRL_AUTO_RET (1 << 1) +#define OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP (1 << 0) #define OMAP3430_SETUP_TIME2_MASK (0xffff << 16) #define OMAP3430_SETUP_TIME1_MASK (0xffff << 0) +#define OMAP3430_PRM_POLCTRL_OFFMODE_POL (1 << 3) +#define OMAP3430_PRM_POLCTRL_CLKOUT_POL (1 << 2) +#define OMAP3430_PRM_POLCTRL_CLKREQ_POL (1 << 1) +#define OMAP3430_PRM_POLCTRL_EXTVOL_POL (1 << 0) #endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 623db40fdbbd..48480d557b61 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -17,10 +17,18 @@ # ifndef __ASSEMBLER__ extern void __iomem *prm_base; +extern u16 prm_features; extern void omap2_set_globals_prm(void __iomem *prm); int of_prcm_init(void); # endif +/* + * prm_features flag values + * + * PRM_HAS_IO_WAKEUP: has IO wakeup capability + * PRM_HAS_VOLTAGE: has voltage domains + */ +#define PRM_HAS_IO_WAKEUP (1 << 0) /* * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP @@ -118,6 +126,7 @@ struct prm_reset_src_map { * @read_reset_sources: ptr to the SoC PRM-specific get_reset_source impl * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn + * @late_init: ptr to the late init function * * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are * deprecated. @@ -126,6 +135,7 @@ struct prm_ll_data { u32 (*read_reset_sources)(void); bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx); void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx); + int (*late_init)(void); }; extern int prm_register(struct prm_ll_data *pld); diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index 418de9c3b319..a3a3cca2bcc4 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -18,9 +18,6 @@ #include <linux/io.h> #include <linux/irq.h> -#include "soc.h" -#include "common.h" -#include "vp.h" #include "powerdomain.h" #include "clockdomain.h" #include "prm2xxx.h" @@ -201,19 +198,11 @@ static struct prm_ll_data omap2xxx_prm_ll_data = { int __init omap2xxx_prm_init(void) { - if (!cpu_is_omap24xx()) - return 0; - return prm_register(&omap2xxx_prm_ll_data); } static void __exit omap2xxx_prm_exit(void) { - if (!cpu_is_omap24xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap2xxx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap2xxx_prm_ll_data); } __exitcall(omap2xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index 3194dd87e0e4..d2cb6365716f 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -27,7 +27,7 @@ /* * OMAP2-specific global PRM registers - * Use __raw_{read,write}l() with these registers. + * Use {read,write}l_relaxed() with these registers. * * With a few exceptions, these are the register names beginning with * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 947f6adfed0c..c13b4e293ffa 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -16,7 +16,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" #include "powerdomain.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 9624b40836d4..1a3a96392b97 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -55,12 +55,12 @@ /* Power/reset management domain register get/set */ static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) { - return __raw_readl(prm_base + module + idx); + return readl_relaxed(prm_base + module + idx); } static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) { - __raw_writel(val, prm_base + module + idx); + writel_relaxed(val, prm_base + module + idx); } /* Read-modify-write a register in a PRM module. Caller must lock */ diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 720440737744..62709cd2f9c5 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,7 +19,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" #include "powerdomain.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" @@ -27,13 +26,13 @@ /* Read a register in a PRM instance */ u32 am33xx_prm_read_reg(s16 inst, u16 idx) { - return __raw_readl(prm_base + inst + idx); + return readl_relaxed(prm_base + inst + idx); } /* Write into a register in a PRM instance */ void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) { - __raw_writel(val, prm_base + inst + idx); + writel_relaxed(val, prm_base + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 7721990d2006..4bd7a2dca8af 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -43,6 +43,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { .ocp_barrier = &omap3xxx_prm_ocp_barrier, .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, .restore_irqen = &omap3xxx_prm_restore_irqen, + .reconfigure_io_chain = &omap3xxx_prm_reconfigure_io_chain, }; /* @@ -246,7 +247,7 @@ void omap3xxx_prm_reconfigure_io_chain(void) */ static void __init omap3xxx_prm_enable_io_wakeup(void) { - if (omap3_has_io_wakeup()) + if (prm_features & PRM_HAS_IO_WAKEUP) omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); } @@ -400,23 +401,26 @@ struct pwrdm_ops omap3_pwrdm_operations = { * */ +static int omap3xxx_prm_late_init(void); + static struct prm_ll_data omap3xxx_prm_ll_data = { .read_reset_sources = &omap3xxx_prm_read_reset_sources, + .late_init = &omap3xxx_prm_late_init, }; int __init omap3xxx_prm_init(void) { - if (!cpu_is_omap34xx()) - return 0; + if (omap3_has_io_wakeup()) + prm_features |= PRM_HAS_IO_WAKEUP; return prm_register(&omap3xxx_prm_ll_data); } -static int __init omap3xxx_prm_late_init(void) +static int omap3xxx_prm_late_init(void) { int ret; - if (!cpu_is_omap34xx()) + if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; omap3xxx_prm_enable_io_wakeup(); @@ -427,15 +431,9 @@ static int __init omap3xxx_prm_late_init(void) return ret; } -omap_subsys_initcall(omap3xxx_prm_late_init); static void __exit omap3xxx_prm_exit(void) { - if (!cpu_is_omap34xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap3xxx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap3xxx_prm_ll_data); } __exitcall(omap3xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index f8eb83323b1a..1dacfc5b1959 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -26,7 +26,7 @@ /* * OMAP3-specific global PRM registers - * Use __raw_{read,write}l() with these registers. + * Use {read,write}l_relaxed() with these registers. * * With a few exceptions, these are the register names beginning with * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 03a603476cfc..a7f6ea27180a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -47,6 +47,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .ocp_barrier = &omap44xx_prm_ocp_barrier, .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, .restore_irqen = &omap44xx_prm_restore_irqen, + .reconfigure_io_chain = &omap44xx_prm_reconfigure_io_chain, }; /* @@ -81,13 +82,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(prm_base + inst + reg); + return readl_relaxed(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, prm_base + inst + reg); + writel_relaxed(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -649,6 +650,8 @@ struct pwrdm_ops omap4_pwrdm_operations = { .pwrdm_has_voltdm = omap4_check_vcvp, }; +static int omap44xx_prm_late_init(void); + /* * XXX document */ @@ -656,34 +659,29 @@ static struct prm_ll_data omap44xx_prm_ll_data = { .read_reset_sources = &omap44xx_prm_read_reset_sources, .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, + .late_init = &omap44xx_prm_late_init, }; int __init omap44xx_prm_init(void) { - if (!cpu_is_omap44xx() && !soc_is_omap54xx() && !soc_is_dra7xx()) - return 0; + if (cpu_is_omap44xx()) + prm_features |= PRM_HAS_IO_WAKEUP; return prm_register(&omap44xx_prm_ll_data); } -static int __init omap44xx_prm_late_init(void) +static int omap44xx_prm_late_init(void) { - if (!cpu_is_omap44xx()) + if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); } -omap_subsys_initcall(omap44xx_prm_late_init); static void __exit omap44xx_prm_exit(void) { - if (!cpu_is_omap44xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap44xx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap44xx_prm_ll_data); } __exitcall(omap44xx_prm_exit); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index b4c4ab9c8044..25e8b8232115 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -62,6 +62,8 @@ static struct omap_prcm_irq_setup *prcm_irq_setup; /* prm_base: base virtual address of the PRM IP block */ void __iomem *prm_base; +u16 prm_features; + /* * prm_ll_data: function pointers to SoC-specific implementations of * common PRM functions @@ -330,12 +332,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) if (of_have_populated_dt()) { int irq = omap_prcm_event_to_irq("io"); - if (cpu_is_omap34xx()) - omap_pcs_legacy_init(irq, - omap3xxx_prm_reconfigure_io_chain); - else - omap_pcs_legacy_init(irq, - omap44xx_prm_reconfigure_io_chain); + omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain); } return 0; @@ -530,3 +527,11 @@ int __init of_prcm_init(void) return 0; } + +static int __init prm_late_init(void) +{ + if (prm_ll_data->late_init) + return prm_ll_data->late_init(); + return 0; +} +subsys_initcall(prm_late_init); diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 05fcf6de44ee..69f0dd08629c 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -49,7 +49,7 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_prm_bases[part]); - return __raw_readl(_prm_bases[part] + inst + idx); + return readl_relaxed(_prm_bases[part] + inst + idx); } /* Write into a register in a PRM instance */ @@ -58,7 +58,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_prm_bases[part]); - __raw_writel(val, _prm_bases[part] + inst + idx); + writel_relaxed(val, _prm_bases[part] + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 446aa13511fd..645a2a46b213 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -31,24 +31,24 @@ extern void __iomem *omap2_sms_base; static inline void sdrc_write_reg(u32 val, u16 reg) { - __raw_writel(val, OMAP_SDRC_REGADDR(reg)); + writel_relaxed(val, OMAP_SDRC_REGADDR(reg)); } static inline u32 sdrc_read_reg(u16 reg) { - return __raw_readl(OMAP_SDRC_REGADDR(reg)); + return readl_relaxed(OMAP_SDRC_REGADDR(reg)); } /* SMS global register get/set */ static inline void sms_write_reg(u32 val, u16 reg) { - __raw_writel(val, OMAP_SMS_REGADDR(reg)); + writel_relaxed(val, OMAP_SMS_REGADDR(reg)); } static inline u32 sms_read_reg(u16 reg) { - return __raw_readl(OMAP_SMS_REGADDR(reg)); + return readl_relaxed(OMAP_SMS_REGADDR(reg)); } extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms); diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 907291714643..ae3f1553158d 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -103,9 +103,9 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force) * prm2xxx.c function */ if (cpu_is_omap2420()) - __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP); + writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP); else - __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP); + writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP); omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); curr_perf_level = level; local_irq_restore(flags); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 30abcc8b20e0..de2a34c423a7 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -459,10 +459,15 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) #define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) +#define DRA7XX_CLASS 0x07000000 +#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) +#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) + void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); void omap4xxx_check_revision(void); void omap5xxx_check_revision(void); +void dra7xxx_check_revision(void); void omap3xxx_check_features(void); void ti81xx_check_features(void); void am33xx_check_features(void); diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index d7bc33f15344..1b91ef0c182a 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -57,7 +57,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, /* * In OMAP4 the efuse registers are 24 bit aligned. - * A __raw_readl will fail for non-32 bit aligned address + * A readl_relaxed will fail for non-32 bit aligned address * and hence the 8-bit read and shift. */ if (cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index 4bd096836235..ddf1818af228 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -70,16 +70,16 @@ static int is_sram_locked(void) if (OMAP2_DEVICE_TYPE_GP == omap_type()) { /* RAMFW: R/W access to all initiators for all qualifier sets */ if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2); + writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); } return 0; } else diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b62de9f9d05c..43d03fbf4c0b 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -361,7 +361,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, /* Clocksource code */ static struct omap_dm_timer clksrc; -static bool use_gptimer_clksrc; +static bool use_gptimer_clksrc __initdata; /* * clocksource @@ -546,15 +546,15 @@ static void __init realtime_counter_init(void) } /* Program numerator and denumerator registers */ - reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) & + reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) & NUMERATOR_DENUMERATOR_MASK; reg |= num; - __raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET); + writel_relaxed(reg, base + INCREMENTER_NUMERATOR_OFFSET); - reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) & + reg = readl_relaxed(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) & NUMERATOR_DENUMERATOR_MASK; reg |= den; - __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); + writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); arch_timer_freq = (rate / den) * num; set_cntfreq(); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 10855eb4ccc1..745367c0c2bb 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,7 +28,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/usb/phy.h> -#include <linux/usb/usb_phy_gen_xceiv.h> +#include <linux/usb/usb_phy_generic.h> #include "soc.h" #include "omap_device.h" @@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = { /* .init_data filled later */ }; -static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */ +static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */ static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ /** @@ -435,7 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) struct platform_device *pdev; char *phy_id; struct platform_device_info pdevinfo; - struct usb_phy_gen_xceiv_platform_data nop_pdata; + struct usb_phy_generic_platform_data nop_pdata; for (i = 0; i < num_phys; i++) { @@ -469,8 +469,8 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) pdevinfo.id = phy->port; pdevinfo.data = &nop_pdata; pdevinfo.size_data = - sizeof(struct usb_phy_gen_xceiv_platform_data); - scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d", + sizeof(struct usb_phy_generic_platform_data); + scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d", phy->port); pdev = platform_device_register_full(&pdevinfo); if (IS_ERR(pdev)) { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 49ac7977e03e..a4628a9e760c 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -220,10 +220,126 @@ static inline u32 omap_usec_to_32k(u32 usec) return DIV_ROUND_UP_ULL(32768ULL * (u64)usec, 1000000ULL); } -/* Set oscillator setup time for omap3 */ -static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm) +struct omap3_vc_timings { + u32 voltsetup1; + u32 voltsetup2; +}; + +struct omap3_vc { + struct voltagedomain *vd; + u32 voltctrl; + u32 voltsetup1; + u32 voltsetup2; + struct omap3_vc_timings timings[2]; +}; +static struct omap3_vc vc; + +void omap3_vc_set_pmic_signaling(int core_next_state) +{ + struct voltagedomain *vd = vc.vd; + struct omap3_vc_timings *c = vc.timings; + u32 voltctrl, voltsetup1, voltsetup2; + + voltctrl = vc.voltctrl; + voltsetup1 = vc.voltsetup1; + voltsetup2 = vc.voltsetup2; + + switch (core_next_state) { + case PWRDM_POWER_OFF: + voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_RET | + OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP); + voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_OFF; + if (voltctrl & OMAP3430_PRM_VOLTCTRL_SEL_OFF) + voltsetup2 = c->voltsetup2; + else + voltsetup1 = c->voltsetup1; + break; + case PWRDM_POWER_RET: + default: + c++; + voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_OFF | + OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP); + voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_RET; + voltsetup1 = c->voltsetup1; + break; + } + + if (voltctrl != vc.voltctrl) { + vd->write(voltctrl, OMAP3_PRM_VOLTCTRL_OFFSET); + vc.voltctrl = voltctrl; + } + if (voltsetup1 != vc.voltsetup1) { + vd->write(c->voltsetup1, + OMAP3_PRM_VOLTSETUP1_OFFSET); + vc.voltsetup1 = voltsetup1; + } + if (voltsetup2 != vc.voltsetup2) { + vd->write(c->voltsetup2, + OMAP3_PRM_VOLTSETUP2_OFFSET); + vc.voltsetup2 = voltsetup2; + } +} + +#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \ + OMAP3430_PRM_POLCTRL_CLKREQ_POL) +#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL + +/* + * Configure signal polarity for sys_clkreq and sys_off_mode pins + * as the default values are wrong and can cause the system to hang + * if any twl4030 scripts are loaded. + */ +static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm) +{ + u32 val; + + if (vc.vd) + return; + + vc.vd = voltdm; + + val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET); + if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) || + (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) { + val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL; + val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL; + pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n", + val); + voltdm->write(val, OMAP3_PRM_POLCTRL_OFFSET); + } + + /* + * By default let's use I2C4 signaling for retention idle + * and sys_off_mode pin signaling for off idle. This way we + * have sys_clk_req pin go down for retention and both + * sys_clk_req and sys_off_mode pins will go down for off + * idle. And we can also scale voltages to zero for off-idle. + * Note that no actual voltage scaling during off-idle will + * happen unless the board specific twl4030 PMIC scripts are + * loaded. + */ + val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET); + if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) { + val |= OMAP3430_PRM_VOLTCTRL_SEL_OFF; + pr_debug("PM: setting voltctrl sys_off_mode signaling to 0x%x\n", + val); + voltdm->write(val, OMAP3_PRM_VOLTCTRL_OFFSET); + } + vc.voltctrl = val; + + omap3_vc_set_pmic_signaling(PWRDM_POWER_ON); +} + +static void omap3_init_voltsetup1(struct voltagedomain *voltdm, + struct omap3_vc_timings *c, u32 idle) { - voltdm->write(omap_usec_to_32k(usec), OMAP3_PRM_CLKSETUP_OFFSET); + unsigned long val; + + val = (voltdm->vc_param->on - idle) / voltdm->pmic->slew_rate; + val *= voltdm->sys_clk.rate / 8 / 1000000 + 1; + val <<= __ffs(voltdm->vfsm->voltsetup_mask); + c->voltsetup1 &= ~voltdm->vfsm->voltsetup_mask; + c->voltsetup1 |= val; } /** @@ -236,37 +352,21 @@ static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm) * or retention. Off mode has additionally an option to use sys_off_mode * pad, which uses a global signal to program the whole power IC to * off-mode. + * + * Note that pmic is not controlling the voltage scaling during + * retention signaled over I2C4, so we can keep voltsetup2 as 0. + * And the oscillator is not shut off over I2C4, so no need to + * set clksetup. */ -static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode) +static void omap3_set_i2c_timings(struct voltagedomain *voltdm) { - unsigned long voltsetup1; - u32 tgt_volt; - - /* - * Oscillator is shut down only if we are using sys_off_mode pad, - * thus we set a minimal setup time here - */ - omap3_set_clksetup(1, voltdm); + struct omap3_vc_timings *c = vc.timings; - if (off_mode) - tgt_volt = voltdm->vc_param->off; - else - tgt_volt = voltdm->vc_param->ret; - - voltsetup1 = (voltdm->vc_param->on - tgt_volt) / - voltdm->pmic->slew_rate; - - voltsetup1 = voltsetup1 * voltdm->sys_clk.rate / 8 / 1000000 + 1; - - voltdm->rmw(voltdm->vfsm->voltsetup_mask, - voltsetup1 << __ffs(voltdm->vfsm->voltsetup_mask), - voltdm->vfsm->voltsetup_reg); - - /* - * pmic is not controlling the voltage scaling during retention, - * thus set voltsetup2 to 0 - */ - voltdm->write(0, OMAP3_PRM_VOLTSETUP2_OFFSET); + /* Configure PRWDM_POWER_OFF over I2C4 */ + omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->off); + c++; + /* Configure PRWDM_POWER_RET over I2C4 */ + omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->ret); } /** @@ -275,69 +375,49 @@ static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode) * * Calculates and sets up off-mode timings for a channel. Off-mode * can use either I2C based voltage scaling, or alternatively - * sys_off_mode pad can be used to send a global command to power IC. - * This function first checks which mode is being used, and calls - * omap3_set_i2c_timings() if the system is using I2C control mode. + * sys_off_mode pad can be used to send a global command to power IC.n, * sys_off_mode has the additional benefit that voltages can be * scaled to zero volt level with TWL4030 / TWL5030, I2C can only * scale to 600mV. + * + * Note that omap is not controlling the voltage scaling during + * off idle signaled by sys_off_mode, so we can keep voltsetup1 + * as 0. */ static void omap3_set_off_timings(struct voltagedomain *voltdm) { - unsigned long clksetup; - unsigned long voltsetup2; - unsigned long voltsetup2_old; - u32 val; - u32 tstart, tshut; + struct omap3_vc_timings *c = vc.timings; + u32 tstart, tshut, clksetup, voltoffset; - /* check if sys_off_mode is used to control off-mode voltages */ - val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET); - if (!(val & OMAP3430_SEL_OFF_MASK)) { - /* No, omap is controlling them over I2C */ - omap3_set_i2c_timings(voltdm, true); + if (c->voltsetup2) return; - } omap_pm_get_oscillator(&tstart, &tshut); - omap3_set_clksetup(tstart, voltdm); - - clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET); - - /* voltsetup 2 in us */ - voltsetup2 = voltdm->vc_param->on / voltdm->pmic->slew_rate; - - /* convert to 32k clk cycles */ - voltsetup2 = DIV_ROUND_UP(voltsetup2 * 32768, 1000000); - - voltsetup2_old = voltdm->read(OMAP3_PRM_VOLTSETUP2_OFFSET); - - /* - * Update voltsetup2 if higher than current value (needed because - * we have multiple channels with different ramp times), also - * update voltoffset always to value recommended by TRM - */ - if (voltsetup2 > voltsetup2_old) { - voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET); - voltdm->write(clksetup - voltsetup2, - OMAP3_PRM_VOLTOFFSET_OFFSET); - } else - voltdm->write(clksetup - voltsetup2_old, - OMAP3_PRM_VOLTOFFSET_OFFSET); + if (tstart == ULONG_MAX) { + pr_debug("PM: oscillator start-up time not initialized, using 10ms\n"); + clksetup = omap_usec_to_32k(10000); + } else { + clksetup = omap_usec_to_32k(tstart); + } /* - * omap is not controlling voltage scaling during off-mode, - * thus set voltsetup1 to 0 + * For twl4030 errata 27, we need to allow minimum ~488.32 us wait to + * switch from HFCLKIN to internal oscillator. That means timings + * have voltoffset fixed to 0xa in rounded up 32 KiHz cycles. And + * that means we can calculate the value based on the oscillator + * start-up time since voltoffset2 = clksetup - voltoffset. */ - voltdm->rmw(voltdm->vfsm->voltsetup_mask, 0, - voltdm->vfsm->voltsetup_reg); - - /* voltoffset must be clksetup minus voltsetup2 according to TRM */ - voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET); + voltoffset = omap_usec_to_32k(488); + c->voltsetup2 = clksetup - voltoffset; + voltdm->write(clksetup, OMAP3_PRM_CLKSETUP_OFFSET); + voltdm->write(voltoffset, OMAP3_PRM_VOLTOFFSET_OFFSET); } static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) { + omap3_vc_init_pmic_signaling(voltdm); omap3_set_off_timings(voltdm); + omap3_set_i2c_timings(voltdm); } /** @@ -462,7 +542,7 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode) val |= omap4_usec_to_val_scrm(tshut, OMAP4_DOWNTIME_SHIFT, OMAP4_DOWNTIME_MASK); - __raw_writel(val, OMAP4_SCRM_CLKSETUPTIME); + writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME); } /* OMAP4 specific voltage init functions */ @@ -584,7 +664,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm) val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29; /* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */ - __raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP + + writel_relaxed(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP + OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2)); /* HSSCLH can always be zero */ diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 91c8d75bf2ea..cdbdd78e755e 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -117,6 +117,9 @@ extern struct omap_vc_param omap4_mpu_vc_data; extern struct omap_vc_param omap4_iva_vc_data; extern struct omap_vc_param omap4_core_vc_data; +void omap3_vc_set_pmic_signaling(int core_next_state); + + void omap_vc_init_channel(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, unsigned long target_volt, diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index d15c7bbab8e2..97d6607d447a 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -49,12 +49,12 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh) } /* sequence required to disable watchdog */ - __raw_writel(0xAAAA, base + OMAP_WDT_SPR); - while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + writel_relaxed(0xAAAA, base + OMAP_WDT_SPR); + while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) cpu_relax(); - __raw_writel(0x5555, base + OMAP_WDT_SPR); - while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + writel_relaxed(0x5555, base + OMAP_WDT_SPR); + while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) cpu_relax(); return 0; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 14f2cae4109c..2412efb6cdd9 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -5,6 +5,11 @@ menu "Orion Implementations" config ARCH_ORION5X_DT bool "Marvell Orion5x Flattened Device Tree" select USE_OF + select ORION_CLK + select ORION_IRQCHIP + select ORION_TIMER + select PINCTRL + select PINCTRL_ORION help Say 'Y' here if you want your kernel to support the Marvell Orion5x using flattened device tree. @@ -23,6 +28,14 @@ config MACH_RD88F5182 Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2 +config MACH_RD88F5182_DT + bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)" + select ARCH_ORION5X_DT + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the Marvell + Orion-NAS (88F5182) RD2, Flattened Device Tree. + config MACH_KUROBOX_PRO bool "KuroBox Pro" select I2C_BOARDINFO @@ -102,28 +115,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2_DT - bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" - select I2C_BOARDINFO +config MACH_D2NET_DT + bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)" select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2 (Flattened Device Tree). - -config MACH_D2NET - bool "LaCie d2 Network" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the LaCie d2 Network NAS. -config MACH_BIGDISK - bool "LaCie Big Disk Network" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - LaCie Big Disk Network NAS. - config MACH_NET2BIG bool "LaCie 2Big Network" select I2C_BOARDINFO @@ -131,8 +129,9 @@ config MACH_NET2BIG Say 'Y' here if you want your kernel to support the LaCie 2Big Network NAS. -config MACH_MSS2 - bool "Maxtor Shared Storage II" +config MACH_MSS2_DT + bool "Maxtor Shared Storage II (Flattened Device Tree)" + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 45da805fb236..a40b5c9a58c4 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,10 +12,7 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_D2NET) += d2net-setup.o -obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o -obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o @@ -23,4 +20,6 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o -obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o +obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o +obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o +obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c new file mode 100644 index 000000000000..8a7284124153 --- /dev/null +++ b/arch/arm/mach-orion5x/board-d2net.c @@ -0,0 +1,109 @@ +/* + * arch/arm/mach-orion5x/board-d2net.c + * + * LaCie d2Network and Big Disk Network NAS setup + * + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <plat/orion-gpio.h> +#include "common.h" + +/***************************************************************************** + * LaCie d2 Network Info + ****************************************************************************/ + +/***************************************************************************** + * GPIO LED's + ****************************************************************************/ + +/* + * The blue front LED is wired to the CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * led_off | blink_ctrl | SATA active | LED state + * | | | + * 1 | x | x | off + * 0 | 0 | 0 | off + * 0 | 1 | 0 | blink (rate 300ms) + * 0 | x | 1 | on + * + * Notes: The blue and the red front LED's can't be on at the same time. + * Red LED have priority. + */ + +#define D2NET_GPIO_RED_LED 6 +#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 +#define D2NET_GPIO_BLUE_LED_OFF 23 + +static struct gpio_led d2net_leds[] = { + { + .name = "d2net:blue:sata", + .default_trigger = "default-on", + .gpio = D2NET_GPIO_BLUE_LED_OFF, + .active_low = 1, + }, + { + .name = "d2net:red:fail", + .gpio = D2NET_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data d2net_led_data = { + .num_leds = ARRAY_SIZE(d2net_leds), + .leds = d2net_leds, +}; + +static struct platform_device d2net_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &d2net_led_data, + }, +}; + +static void __init d2net_gpio_leds_init(void) +{ + int err; + + /* Configure register blink_ctrl to allow SATA activity LED blinking. */ + err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); + if (err == 0) { + err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); + if (err) + gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); + } + if (err) + pr_err("d2net: failed to configure blue LED blink GPIO\n"); + + platform_device_register(&d2net_gpio_leds); +} + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +void __init d2net_init(void) +{ + d2net_gpio_leds_init(); + + pr_notice("d2net: Flash write are not yet supported.\n"); +} diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index c134a826070a..79f033b1ddff 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -15,10 +15,16 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/cpu.h> +#include <linux/mbus.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <mach/orion5x.h> +#include <mach/bridge-regs.h> #include <plat/irq.h> +#include <plat/time.h> #include "common.h" static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { @@ -39,14 +45,13 @@ static void __init orion5x_dt_init(void) orion5x_id(&dev, &rev, &dev_name); printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + BUG_ON(mvebu_mbus_dt_init(false)); + /* * Setup Orion address map */ orion5x_setup_wins(); - /* Setup root of clk tree */ - clk_init(); - /* * Don't issue "Wait for Interrupt" instruction if we are * running on D0 5281 silicon. @@ -56,8 +61,8 @@ static void __init orion5x_dt_init(void) cpu_idle_poll_ctrl(true); } - if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) - edmini_v2_init(); + if (of_machine_is_compatible("maxtor,shared-storage-2")) + mss2_init(); of_platform_populate(NULL, of_default_bus_match_table, orion5x_auxdata_lookup, NULL); @@ -71,9 +76,6 @@ static const char *orion5x_dt_compat[] = { DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion_dt_init_irq, - .init_time = orion5x_timer_init, .init_machine = orion5x_dt_init, .restart = orion5x_restart, .dt_compat = orion5x_dt_compat, diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c new file mode 100644 index 000000000000..66f9c3ba86cc --- /dev/null +++ b/arch/arm/mach-orion5x/board-mss2.c @@ -0,0 +1,90 @@ +/* + * Maxtor Shared Storage II Board Setup + * + * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <mach/bridge-regs.h> +#include "common.h" + +/***************************************************************************** + * Maxtor Shared Storage II Info + ****************************************************************************/ + +/**************************************************************************** + * PCI setup + ****************************************************************************/ +static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + return -1; +} + +static struct hw_pci mss2_pci __initdata = { + .nr_controllers = 2, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = mss2_pci_map_irq, +}; + +static int __init mss2_pci_init(void) +{ + if (machine_is_mss2()) + pci_common_init(&mss2_pci); + + return 0; +} +subsys_initcall(mss2_pci_init); + +/***************************************************************************** + * MSS2 power off method + ****************************************************************************/ +/* + * On the Maxtor Shared Storage II, the shutdown process is the following : + * - Userland modifies U-boot env to tell U-boot to go idle at next boot + * - The board reboots + * - U-boot starts and go into an idle mode until the user press "power" + */ +static void mss2_power_off(void) +{ + u32 reg; + + /* + * Enable and issue soft reset + */ + reg = readl(RSTOUTn_MASK); + reg |= 1 << 2; + writel(reg, RSTOUTn_MASK); + + reg = readl(CPU_SOFT_RESET); + reg |= 1; + writel(reg, CPU_SOFT_RESET); +} + +void __init mss2_init(void) +{ + /* register mss2 specific power-off method */ + pm_power_off = mss2_power_off; +} diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c new file mode 100644 index 000000000000..270824b0e50f --- /dev/null +++ b/arch/arm/mach-orion5x/board-rd88f5182.c @@ -0,0 +1,116 @@ +/* + * arch/arm/mach-orion5x/rd88f5182-setup.c + * + * Marvell Orion-NAS Reference Design Setup + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include "common.h" + +/***************************************************************************** + * RD-88F5182 Info + ****************************************************************************/ + +/* + * PCI + */ + +#define RD88F5182_PCI_SLOT0_OFFS 7 +#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 +#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 + +/***************************************************************************** + * PCI + ****************************************************************************/ + +static void __init rd88f5182_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; + if (gpio_request(pin, "PCI IntA") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); + } + + pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; + if (gpio_request(pin, "PCI IntB") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - RD88F5182_PCI_SLOT0_OFFS) { + case 0: + if (pin == 1) + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); + else + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); + default: + return -1; + } +} + +static struct hw_pci rd88f5182_pci __initdata = { + .nr_controllers = 2, + .preinit = rd88f5182_pci_preinit, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5182_pci_map_irq, +}; + +static int __init rd88f5182_pci_init(void) +{ + if (of_machine_is_compatible("marvell,rd-88f5182-nas")) + pci_common_init(&rd88f5182_pci); + + return 0; +} + +subsys_initcall(rd88f5182_pci_init); diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 3f1de1111e0f..6bbb7b55c6d1 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -365,8 +365,7 @@ void orion5x_restart(enum reboot_mode mode, const char *cmd) * Many orion-based systems have buggy bootloader implementations. * This is a common fixup for bogus memory tags. */ -void __init tag_fixup_mem32(struct tag *t, char **from, - struct meminfo *meminfo) +void __init tag_fixup_mem32(struct tag *t, char **from) { for (; t->hdr.size; t = tag_next(t)) if (t->hdr.tag == ATAG_MEM && diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 7548db2bfb8a..cd0389c6e822 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -64,17 +64,15 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -/* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_EDMINI_V2_DT -void edmini_v2_init(void); +struct tag; +extern void __init tag_fixup_mem32(struct tag *, char **); + +#ifdef CONFIG_MACH_MSS2_DT +extern void mss2_init(void); #else -static inline void edmini_v2_init(void) {}; +static inline void mss2_init(void) {} #endif -struct meminfo; -struct tag; -extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); - /***************************************************************************** * Helpers to access Orion registers ****************************************************************************/ diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c deleted file mode 100644 index 8f68b745c1d5..000000000000 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * arch/arm/mach-orion5x/d2net-setup.c - * - * LaCie d2Network and Big Disk Network NAS setup - * - * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <plat/orion-gpio.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * LaCie d2 Network Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define D2NET_NOR_BOOT_BASE 0xfff80000 -#define D2NET_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on Boot Device - ****************************************************************************/ - -/* - * TODO: Check write support on flash MX29LV400CBTC-70G - */ - -static struct mtd_partition d2net_partitions[] = { - { - .name = "Full512kb", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data d2net_nor_flash_data = { - .width = 1, - .parts = d2net_partitions, - .nr_parts = ARRAY_SIZE(d2net_partitions), -}; - -static struct resource d2net_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = D2NET_NOR_BOOT_BASE, - .end = D2NET_NOR_BOOT_BASE - + D2NET_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device d2net_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &d2net_nor_flash_data, - }, - .num_resources = 1, - .resource = &d2net_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data d2net_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * I2C devices - ****************************************************************************/ - -/* - * i2c addr | chip | description - * 0x32 | Ricoh 5C372b | RTC - * 0x3e | GMT G762 | PWM fan controller - * 0x50 | HT24LC08 | eeprom (1kB) - * - * TODO: Add G762 support to the g760a driver. - */ -static struct i2c_board_info __initdata d2net_i2c_devices[] = { - { - I2C_BOARD_INFO("rs5c372b", 0x32), - }, { - I2C_BOARD_INFO("24c08", 0x50), - }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data d2net_sata_data = { - .n_ports = 2, -}; - -#define D2NET_GPIO_SATA0_POWER 3 -#define D2NET_GPIO_SATA1_POWER 12 - -static void __init d2net_sata_power_init(void) -{ - int err; - - err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1); - if (err) - gpio_free(D2NET_GPIO_SATA0_POWER); - } - if (err) - pr_err("d2net: failed to configure SATA0 power GPIO\n"); - - err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1); - if (err) - gpio_free(D2NET_GPIO_SATA1_POWER); - } - if (err) - pr_err("d2net: failed to configure SATA1 power GPIO\n"); -} - -/***************************************************************************** - * GPIO LED's - ****************************************************************************/ - -/* - * The blue front LED is wired to the CPLD and can blink in relation with the - * SATA activity. - * - * The following array detail the different LED registers and the combination - * of their possible values: - * - * led_off | blink_ctrl | SATA active | LED state - * | | | - * 1 | x | x | off - * 0 | 0 | 0 | off - * 0 | 1 | 0 | blink (rate 300ms) - * 0 | x | 1 | on - * - * Notes: The blue and the red front LED's can't be on at the same time. - * Red LED have priority. - */ - -#define D2NET_GPIO_RED_LED 6 -#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 -#define D2NET_GPIO_BLUE_LED_OFF 23 - -static struct gpio_led d2net_leds[] = { - { - .name = "d2net:blue:sata", - .default_trigger = "default-on", - .gpio = D2NET_GPIO_BLUE_LED_OFF, - .active_low = 1, - }, - { - .name = "d2net:red:fail", - .gpio = D2NET_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data d2net_led_data = { - .num_leds = ARRAY_SIZE(d2net_leds), - .leds = d2net_leds, -}; - -static struct platform_device d2net_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &d2net_led_data, - }, -}; - -static void __init d2net_gpio_leds_init(void) -{ - int err; - - /* Configure GPIO over MPP max number. */ - orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1); - - /* Configure register blink_ctrl to allow SATA activity LED blinking. */ - err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); - if (err) - gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); - } - if (err) - pr_err("d2net: failed to configure blue LED blink GPIO\n"); - - platform_device_register(&d2net_gpio_leds); -} - -/**************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define D2NET_GPIO_PUSH_BUTTON 18 -#define D2NET_GPIO_POWER_SWITCH_ON 8 -#define D2NET_GPIO_POWER_SWITCH_OFF 9 - -#define D2NET_SWITCH_POWER_ON 0x1 -#define D2NET_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button d2net_buttons[] = { - { - .type = EV_SW, - .code = D2NET_SWITCH_POWER_OFF, - .gpio = D2NET_GPIO_POWER_SWITCH_OFF, - .desc = "Power rocker switch (auto|off)", - .active_low = 0, - }, - { - .type = EV_SW, - .code = D2NET_SWITCH_POWER_ON, - .gpio = D2NET_GPIO_POWER_SWITCH_ON, - .desc = "Power rocker switch (on|auto)", - .active_low = 0, - }, - { - .type = EV_KEY, - .code = KEY_POWER, - .gpio = D2NET_GPIO_PUSH_BUTTON, - .desc = "Front Push Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data d2net_button_data = { - .buttons = d2net_buttons, - .nbuttons = ARRAY_SIZE(d2net_buttons), -}; - -static struct platform_device d2net_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &d2net_button_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int d2net_mpp_modes[] __initdata = { - MPP0_GPIO, /* Board ID (bit 0) */ - MPP1_GPIO, /* Board ID (bit 1) */ - MPP2_GPIO, /* Board ID (bit 2) */ - MPP3_GPIO, /* SATA 0 power */ - MPP4_UNUSED, - MPP5_GPIO, /* Fan fail detection */ - MPP6_GPIO, /* Red front LED */ - MPP7_UNUSED, - MPP8_GPIO, /* Rear power switch (on|auto) */ - MPP9_GPIO, /* Rear power switch (auto|off) */ - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_GPIO, /* SATA 1 power */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_GPIO, /* Blue front LED blink control */ - MPP17_UNUSED, - MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ - MPP19_UNUSED, - 0, - /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ - /* 23: Blue front LED off */ - /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ -}; - -#define D2NET_GPIO_INHIBIT_POWER_OFF 24 - -static void __init d2net_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(d2net_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_eth_init(&d2net_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - - d2net_sata_power_init(); - orion5x_sata_init(&d2net_sata_data); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - D2NET_NOR_BOOT_BASE, - D2NET_NOR_BOOT_SIZE); - platform_device_register(&d2net_nor_flash); - - platform_device_register(&d2net_gpio_buttons); - - d2net_gpio_leds_init(); - - pr_notice("d2net: Flash write are not yet supported.\n"); - - i2c_register_board_info(0, d2net_i2c_devices, - ARRAY_SIZE(d2net_i2c_devices)); - - orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1); -} - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ - -#ifdef CONFIG_MACH_D2NET -MACHINE_START(D2NET, "LaCie d2 Network") - .atag_offset = 0x100, - .init_machine = d2net_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_BIGDISK -MACHINE_START(BIGDISK, "LaCie Big Disk Network") - .atag_offset = 0x100, - .init_machine = d2net_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c deleted file mode 100644 index f66c1b2ee8c1..000000000000 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * arch/arm/mach-orion5x/edmini_v2-setup.c - * - * LaCie Ethernet Disk mini V2 Setup - * - * Copyright (C) 2008 Christopher Moore <moore@free.fr> - * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/* - * TODO: add Orion USB device port init when kernel.org support is added. - * TODO: add flash write support: see below. - * TODO: add power-off support. - * TODO: add I2C EEPROM support. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mbus.h> -#include <linux/mtd/physmap.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * EDMINI_V2 Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000 -#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on BOOT Device - ****************************************************************************/ - -/* - * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom - * -type device. This could cause risks of accidentally erasing critical - * flash sectors. We thus define a single, write-protected partition covering - * the whole flash. - * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD - * code, break this into at least three partitions: 'u-boot code', 'u-boot - * environment' and 'whatever is left'. - */ - -static struct mtd_partition edmini_v2_partitions[] = { - { - .name = "Full512kb", - .size = 0x00080000, - .offset = 0x00000000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data edmini_v2_nor_flash_data = { - .width = 1, - .parts = edmini_v2_partitions, - .nr_parts = ARRAY_SIZE(edmini_v2_partitions), -}; - -static struct resource edmini_v2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = EDMINI_V2_NOR_BOOT_BASE, - .end = EDMINI_V2_NOR_BOOT_BASE - + EDMINI_V2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device edmini_v2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edmini_v2_nor_flash_data, - }, - .num_resources = 1, - .resource = &edmini_v2_nor_flash_resource, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -#define EDMINIV2_RTC_GPIO 3 - -static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), - .irq = 0, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int edminiv2_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_UNUSED, - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_UNUSED, - MPP7_UNUSED, - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_SATA_LED, /* SATA 0 presence */ - MPP13_SATA_LED, /* SATA 1 presence */ - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - /* 16: Power LED control (0 = On, 1 = Off) */ - MPP16_GPIO, - /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */ - MPP17_GPIO, - /* 18: Power button status (0 = Released, 1 = Pressed) */ - MPP18_GPIO, - MPP19_UNUSED, - 0, -}; - -void __init edmini_v2_init(void) -{ - orion5x_mpp_conf(edminiv2_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - EDMINI_V2_NOR_BOOT_BASE, - EDMINI_V2_NOR_BOOT_SIZE); - platform_device_register(&edmini_v2_nor_flash); - - pr_notice("edmini_v2: USB device port, flash write and power-off " - "are not yet supported.\n"); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0) - edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO); - else - gpio_free(EDMINIV2_RTC_GPIO); - } - - if (edmini_v2_i2c_rtc.irq == 0) - pr_warning("edmini_v2: failed to get RTC IRQ\n"); - - i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); -} diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 9654b0cc5892..cd4bac4d7e43 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -16,6 +16,7 @@ #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include <asm/exception.h> #include "common.h" static int __initdata gpio0_irqs[4] = { @@ -25,10 +26,37 @@ static int __initdata gpio0_irqs[4] = { IRQ_ORION5X_GPIO_24_31, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +asmlinkage void +__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(MAIN_IRQ_CAUSE); + stat &= readl_relaxed(MAIN_IRQ_MASK); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init orion5x_init_irq(void) { orion_irq_init(0, MAIN_IRQ_MASK); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(orion5x_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-31. */ diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c deleted file mode 100644 index e105130ba51c..000000000000 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Maxtor Shared Storage II Board Setup - * - * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <mach/bridge-regs.h> -#include "common.h" -#include "mpp.h" - -#define MSS2_NOR_BOOT_BASE 0xff800000 -#define MSS2_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * Maxtor Shared Storage II Info - ****************************************************************************/ - -/* - * Maxtor Shared Storage II hardware : - * - Marvell 88F5182-A2 C500 - * - Marvell 88E1111 Gigabit Ethernet PHY - * - RTC M41T81 (@0x68) on I2C bus - * - 256KB NOR flash - * - 64MB of RAM - */ - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data mss2_nor_flash_data = { - .width = 1, -}; - -static struct resource mss2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = MSS2_NOR_BOOT_BASE, - .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device mss2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mss2_nor_flash_data, - }, - .resource = &mss2_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * PCI setup - ****************************************************************************/ -static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - return -1; -} - -static struct hw_pci mss2_pci __initdata = { - .nr_controllers = 2, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = mss2_pci_map_irq, -}; - -static int __init mss2_pci_init(void) -{ - if (machine_is_mss2()) - pci_common_init(&mss2_pci); - - return 0; -} -subsys_initcall(mss2_pci_init); - - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data mss2_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data mss2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO buttons - ****************************************************************************/ - -#define MSS2_GPIO_KEY_RESET 12 -#define MSS2_GPIO_KEY_POWER 11 - -static struct gpio_keys_button mss2_buttons[] = { - { - .code = KEY_POWER, - .gpio = MSS2_GPIO_KEY_POWER, - .desc = "Power", - .active_low = 1, - }, { - .code = KEY_RESTART, - .gpio = MSS2_GPIO_KEY_RESET, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data mss2_button_data = { - .buttons = mss2_buttons, - .nbuttons = ARRAY_SIZE(mss2_buttons), -}; - -static struct platform_device mss2_button_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mss2_button_data, - }, -}; - -/***************************************************************************** - * RTC m41t81 on I2C bus - ****************************************************************************/ - -#define MSS2_GPIO_RTC_IRQ 3 - -static struct i2c_board_info __initdata mss2_i2c_rtc = { - I2C_BOARD_INFO("m41t81", 0x68), -}; - -/***************************************************************************** - * MSS2 power off method - ****************************************************************************/ -/* - * On the Maxtor Shared Storage II, the shutdown process is the following : - * - Userland modifies U-boot env to tell U-boot to go idle at next boot - * - The board reboots - * - U-boot starts and go into an idle mode until the user press "power" - */ -static void mss2_power_off(void) -{ - u32 reg; - - /* - * Enable and issue soft reset - */ - reg = readl(RSTOUTn_MASK); - reg |= 1 << 2; - writel(reg, RSTOUTn_MASK); - - reg = readl(CPU_SOFT_RESET); - reg |= 1; - writel(reg, CPU_SOFT_RESET); -} - -/**************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int mss2_mpp_modes[] __initdata = { - MPP0_GPIO, /* Power LED */ - MPP1_GPIO, /* Error LED */ - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_GPIO, /* HDD ind. (Single/Dual)*/ - MPP5_GPIO, /* HD0 5V control */ - MPP6_GPIO, /* HD0 12V control */ - MPP7_GPIO, /* HD1 5V control */ - MPP8_GPIO, /* HD1 12V control */ - MPP9_UNUSED, - MPP10_GPIO, /* Fan control */ - MPP11_GPIO, /* Power button */ - MPP12_GPIO, /* Reset button */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static void __init mss2_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion5x_init(); - - orion5x_mpp_conf(mss2_mpp_modes); - - /* - * MPP[20] Unused - * MPP[21] PCI clock - * MPP[22] USB 0 over current - * MPP[23] USB 1 over current - */ - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&mss2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&mss2_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - MSS2_NOR_BOOT_BASE, - MSS2_NOR_BOOT_SIZE); - platform_device_register(&mss2_nor_flash); - - platform_device_register(&mss2_button_device); - - if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) { - if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0) - mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ); - else - gpio_free(MSS2_GPIO_RTC_IRQ); - } - i2c_register_board_info(0, &mss2_i2c_rtc, 1); - - /* register mss2 specific power-off method */ - pm_power_off = mss2_power_off; -} - -MACHINE_START(MSS2, "Maxtor Shared Storage II") - /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .atag_offset = 0x100, - .init_machine = mss2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 7a6b4a323125..8846e7d87ea5 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -2,7 +2,6 @@ obj-y += rstc.o obj-y += common.o obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o -obj-$(CONFIG_CACHE_L2X0) += l2x0.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 47c7819edb9b..a860ea27e8ae 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -34,6 +34,8 @@ static const char *atlas6_dt_match[] __initconst = { DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, @@ -48,6 +50,8 @@ static const char *prima2_dt_match[] __initconst = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = sirfsoc_map_io, .dma_zone_size = SZ_256M, .init_late = sirfsoc_init_late, @@ -63,6 +67,8 @@ static const char *marco_dt_match[] __initconst = { DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(sirfsoc_smp_ops), .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c deleted file mode 100644 index c7102539c0b0..000000000000 --- a/arch/arm/mach-prima2/l2x0.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * l2 cache initialization for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <asm/hardware/cache-l2x0.h> - -struct l2x0_aux { - u32 val; - u32 mask; -}; - -static const struct l2x0_aux prima2_l2x0_aux __initconst = { - .val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT, - .mask = 0, -}; - -static const struct l2x0_aux marco_l2x0_aux __initconst = { - .val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | - (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT), - .mask = L2X0_AUX_CTRL_MASK, -}; - -static const struct of_device_id sirf_l2x0_ids[] __initconst = { - { .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, }, - { .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, }, - {}, -}; - -static int __init sirfsoc_l2x0_init(void) -{ - struct device_node *np; - const struct l2x0_aux *aux; - - np = of_find_matching_node(NULL, sirf_l2x0_ids); - if (np) { - aux = of_match_node(sirf_l2x0_ids, np)->data; - return l2x0_of_init(aux->val, aux->mask); - } - - return 0; -} -early_initcall(sirfsoc_l2x0_init); diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index c4525a88e5da..96e9bc102117 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -71,7 +71,6 @@ static int sirfsoc_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: sirfsoc_pre_suspend_power_off(); - outer_flush_all(); outer_disable(); /* go zzz */ cpu_suspend(0, sirfsoc_finish_suspend); diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 4887a2a4c698..3dffcb2d714e 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -36,27 +36,33 @@ static int sirfsoc_reset_module(struct reset_controller_dev *rcdev, if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) { /* - * Writing 1 to this bit resets corresponding block. Writing 0 to this - * bit de-asserts reset signal of the corresponding block. - * datasheet doesn't require explicit delay between the set and clear - * of reset bit. it could be shorter if tests pass. + * Writing 1 to this bit resets corresponding block. + * Writing 0 to this bit de-asserts reset signal of the + * corresponding block. datasheet doesn't require explicit + * delay between the set and clear of reset bit. it could + * be shorter if tests pass. */ - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | (1 << reset_bit), + writel(readl(sirfsoc_rstc_base + + (reset_bit / 32) * 4) | (1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); - msleep(10); - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~(1 << reset_bit), + msleep(20); + writel(readl(sirfsoc_rstc_base + + (reset_bit / 32) * 4) & ~(1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); } else { /* * For MARCO and POLO - * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR - * register de-asserts reset signal of the corresponding block. - * datasheet doesn't require explicit delay between the set and clear - * of reset bit. it could be shorter if tests pass. + * Writing 1 to SET register resets corresponding block. + * Writing 1 to CLEAR register de-asserts reset signal of the + * corresponding block. + * datasheet doesn't require explicit delay between the set and + * clear of reset bit. it could be shorter if tests pass. */ - writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); - msleep(10); - writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); + writel(1 << reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 8); + msleep(20); + writel(1 << reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); } mutex_unlock(&rstc_lock); diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 584439bfa59f..4d3588d26c2a 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -837,8 +837,7 @@ static void __init cm_x300_init(void) cm_x300_init_bl(); } -static void __init cm_x300_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init cm_x300_fixup(struct tag *tags, char **cmdline) { /* Make sure that mi->bank[0].start = PHYS_ADDR */ for (; tags->hdr.size; tags = tag_next(tags)) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 57d60542f982..91dd1c7cdbcd 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -34,6 +34,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <linux/module.h> +#include <linux/memblock.h> #include <video/w100fb.h> #include <asm/setup.h> @@ -753,16 +754,13 @@ static void __init corgi_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init fixup_corgi(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init fixup_corgi(struct tag *tags, char **cmdline) { sharpsl_save_param(); - mi->nr_banks=1; - mi->bank[0].start = 0xa0000000; if (machine_is_corgi()) - mi->bank[0].size = (32*1024*1024); + memblock_add(0xa0000000, SZ_32M); else - mi->bank[0].size = (64*1024*1024); + memblock_add(0xa0000000, SZ_64M); } #ifdef CONFIG_MACH_CORGI diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 8280ebcaab9f..cfb864173ce3 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -21,6 +21,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/usb/gpio_vbus.h> +#include <linux/memblock.h> #include <video/w100fb.h> @@ -41,14 +42,12 @@ #include "clock.h" /* Only e800 has 128MB RAM */ -void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) +void __init eseries_fixup(struct tag *tags, char **cmdline) { - mi->nr_banks=1; - mi->bank[0].start = 0xa0000000; if (machine_is_e800()) - mi->bank[0].size = (128*1024*1024); + memblock_add(0xa0000000, SZ_128M); else - mi->bank[0].size = (64*1024*1024); + memblock_add(0xa0000000, SZ_64M); } struct gpio_vbus_mach_info e7xx_udc_info = { diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index a7c30eb0c8db..c66ad4edc5e3 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -574,7 +574,8 @@ static struct platform_device backlight = { }; static struct pwm_lookup hx4700_pwm_lookup[] = { - PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL), + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL, + 30923, PWM_POLARITY_NORMAL), }; /* diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index aedf053a1de5..131991629116 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -29,6 +29,7 @@ #include <linux/spi/ads7846.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> +#include <linux/memblock.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -456,13 +457,10 @@ static void __init poodle_init(void) poodle_init_spi(); } -static void __init fixup_poodle(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init fixup_poodle(struct tag *tags, char **cmdline) { sharpsl_save_param(); - mi->nr_banks=1; - mi->bank[0].start = 0xa0000000; - mi->bank[0].size = (32*1024*1024); + memblock_add(0xa0000000, SZ_32M); } MACHINE_START(POODLE, "SHARP Poodle") diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 0b11c1af51c4..840c3a48e720 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -32,6 +32,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/reboot.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -971,13 +972,10 @@ static void __init spitz_init(void) spitz_i2c_init(); } -static void __init spitz_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init spitz_fixup(struct tag *tags, char **cmdline) { sharpsl_save_param(); - mi->nr_banks = 1; - mi->bank[0].start = 0xa0000000; - mi->bank[0].size = (64*1024*1024); + memblock_add(0xa0000000, SZ_64M); } #ifdef CONFIG_MACH_SPITZ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index ef5557b807ed..c158a6e3e0aa 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -37,6 +37,7 @@ #include <linux/i2c/pxa-i2c.h> #include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -960,13 +961,10 @@ static void __init tosa_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init fixup_tosa(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init fixup_tosa(struct tag *tags, char **cmdline) { sharpsl_save_param(); - mi->nr_banks=1; - mi->bank[0].start = 0xa0000000; - mi->bank[0].size = (64*1024*1024); + memblock_add(0xa0000000, SZ_64M); } MACHINE_START(TOSA, "SHARP Tosa") diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index b19d1c361cab..205f9bf3821e 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -413,7 +413,7 @@ static struct fixed_voltage_config can_regulator_pdata = { static struct platform_device can_regulator_device = { .name = "reg-fixed-volage", - .id = -1, + .id = 0, .dev = { .platform_data = &can_regulator_pdata, }, @@ -510,18 +510,6 @@ struct platform_device zeus_max6369_device = { .num_resources = 1, }; -static struct platform_device *zeus_devices[] __initdata = { - &zeus_serial_device, - &zeus_mtd_devices[0], - &zeus_dm9k0_device, - &zeus_dm9k1_device, - &zeus_sram_device, - &zeus_leds_device, - &zeus_pcmcia_device, - &zeus_max6369_device, - &can_regulator_device, -}; - /* AC'97 */ static pxa2xx_audio_ops_t zeus_ac97_info = { .reset_gpio = 95, @@ -532,44 +520,50 @@ static pxa2xx_audio_ops_t zeus_ac97_info = { * USB host */ -static int zeus_ohci_init(struct device *dev) -{ - int err; - - /* Switch on port 2. */ - if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) { - dev_err(dev, "Can't request USB2_PWREN\n"); - return err; - } - - if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) { - gpio_free(ZEUS_USB2_PWREN_GPIO); - dev_err(dev, "Can't enable USB2_PWREN\n"); - return err; - } +static struct regulator_consumer_supply zeus_ohci_regulator_supplies[] = { + REGULATOR_SUPPLY("vbus2", "pxa27x-ohci"), +}; - /* Port 2 is shared between host and client interface. */ - UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; +static struct regulator_init_data zeus_ohci_regulator_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(zeus_ohci_regulator_supplies), + .consumer_supplies = zeus_ohci_regulator_supplies, +}; - return 0; -} +static struct fixed_voltage_config zeus_ohci_regulator_config = { + .supply_name = "vbus2", + .microvolts = 5000000, /* 5.0V */ + .gpio = ZEUS_USB2_PWREN_GPIO, + .enable_high = 1, + .startup_delay = 0, + .init_data = &zeus_ohci_regulator_data, +}; -static void zeus_ohci_exit(struct device *dev) -{ - /* Power-off port 2 */ - gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0); - gpio_free(ZEUS_USB2_PWREN_GPIO); -} +static struct platform_device zeus_ohci_regulator_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &zeus_ohci_regulator_config, + }, +}; static struct pxaohci_platform_data zeus_ohci_platform_data = { .port_mode = PMM_NPS_MODE, /* Clear Power Control Polarity Low and set Power Sense * Polarity Low. Supply power to USB ports. */ .flags = ENABLE_PORT_ALL | POWER_SENSE_LOW, - .init = zeus_ohci_init, - .exit = zeus_ohci_exit, }; +static void zeus_register_ohci(void) +{ + /* Port 2 is shared between host and client interface. */ + UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + + pxa_set_ohci_info(&zeus_ohci_platform_data); +} + /* * Flat Panel */ @@ -677,6 +671,19 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { .udc_command = zeus_udc_command, }; +static struct platform_device *zeus_devices[] __initdata = { + &zeus_serial_device, + &zeus_mtd_devices[0], + &zeus_dm9k0_device, + &zeus_dm9k1_device, + &zeus_sram_device, + &zeus_leds_device, + &zeus_pcmcia_device, + &zeus_max6369_device, + &can_regulator_device, + &zeus_ohci_regulator_device, +}; + #ifdef CONFIG_PM static void zeus_power_off(void) { @@ -847,7 +854,7 @@ static void __init zeus_init(void) platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices)); - pxa_set_ohci_info(&zeus_ohci_platform_data); + zeus_register_ohci(); if (zeus_setup_fb_gpios()) pr_err("Failed to setup fb gpios\n"); diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index a028be234334..fd2b99dceb89 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -2,9 +2,9 @@ config ARCH_QCOM bool "Qualcomm Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC + select ARM_AMBA select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_SMP + select PINCTRL select QCOM_SCM if SMP help Support for Qualcomm's devicetree based systems. diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index bae617ef0b31..c437a9941726 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -15,9 +15,11 @@ #include <asm/mach/arch.h> static const char * const qcom_dt_match[] __initconst = { + "qcom,apq8064", + "qcom,apq8074-dragonboard", + "qcom,apq8084", "qcom,msm8660-surf", "qcom,msm8960-cdp", - "qcom,apq8074-dragonboard", NULL }; diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 1d5ee5c9a1dc..8c1b39a0caa0 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -31,6 +31,7 @@ #include <linux/amba/mmci.h> #include <linux/gfp.h> #include <linux/mtd/physmap.h> +#include <linux/memblock.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -148,6 +149,21 @@ struct platform_device realview_cf_device = { }, }; +static struct resource realview_leds_resources[] = { + { + .start = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET, + .end = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device realview_leds_device = { + .name = "versatile-leds", + .id = -1, + .num_resources = ARRAY_SIZE(realview_leds_resources), + .resource = realview_leds_resources, +}; + static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, @@ -370,19 +386,15 @@ void __init realview_timer_init(unsigned int timer_irq) /* * Setup the memory banks. */ -void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo) +void realview_fixup(struct tag *tags, char **from) { /* * Most RealView platforms have 512MB contiguous RAM at 0x70000000. * Half of this is mirrored at 0. */ #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET - meminfo->bank[0].start = 0x70000000; - meminfo->bank[0].size = SZ_512M; - meminfo->nr_banks = 1; + memblock_add(0x70000000, SZ_512M); #else - meminfo->bank[0].start = 0; - meminfo->bank[0].size = SZ_256M; - meminfo->nr_banks = 1; + memblock_add(0, SZ_256M); #endif } diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 602ca5ec52c5..868ece221978 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -37,6 +37,7 @@ struct machine_desc; extern struct platform_device realview_flash_device; extern struct platform_device realview_cf_device; +extern struct platform_device realview_leds_device; extern struct platform_device realview_i2c_device; extern struct mmci_platform_data realview_mmc0_plat_data; extern struct mmci_platform_data realview_mmc1_plat_data; @@ -51,8 +52,7 @@ extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); extern void realview_init_early(void); -extern void realview_fixup(struct tag *tags, char **from, - struct meminfo *meminfo); +extern void realview_fixup(struct tag *tags, char **from); extern struct smp_operations realview_smp_ops; extern void realview_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index c85ddb2a0ad0..739d4f113097 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -442,8 +442,13 @@ static void __init realview_eb_init(void) realview_eb11mp_fixup(); #ifdef CONFIG_CACHE_L2X0 - /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled - * Bits: .... ...0 0111 1001 0000 .... .... .... */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 1MB (128KB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 1001 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif platform_device_register(&pmu_device); @@ -452,6 +457,7 @@ static void __init realview_eb_init(void) realview_flash_register(&realview_eb_flash_resource, 1); platform_device_register(&realview_i2c_device); platform_device_register(&char_lcd_device); + platform_device_register(&realview_leds_device); eth_device_register(); realview_usb_register(realview_eb_isp1761_resources); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index c5eade76461b..b0e0dcaed944 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -32,6 +32,7 @@ #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <linux/reboot.h> +#include <linux/memblock.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -339,15 +340,12 @@ static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd) dsb(); } -static void realview_pb1176_fixup(struct tag *tags, char **from, - struct meminfo *meminfo) +static void realview_pb1176_fixup(struct tag *tags, char **from) { /* * RealView PB1176 only has 128MB of RAM mapped at 0. */ - meminfo->bank[0].start = 0; - meminfo->bank[0].size = SZ_128M; - meminfo->nr_banks = 1; + memblock_add(0, SZ_128M); } static void __init realview_pb1176_init(void) @@ -355,7 +353,13 @@ static void __init realview_pb1176_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - /* 128Kb (16Kb/way) 8-way associativity. evmon/parity/share enabled. */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 128kB (16kB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 0011 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff); #endif @@ -367,6 +371,7 @@ static void __init realview_pb1176_init(void) realview_usb_register(realview_pb1176_isp1761_resources); platform_device_register(&pmu_device); platform_device_register(&char_lcd_device); + platform_device_register(&realview_leds_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index f4b0962578fe..47bf55fdbf27 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -337,8 +337,13 @@ static void __init realview_pb11mp_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled - * Bits: .... ...0 0111 1001 0000 .... .... .... */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 1MB (128KB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 1001 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif @@ -347,6 +352,7 @@ static void __init realview_pb11mp_init(void) realview_eth_register(NULL, realview_pb11mp_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pb11mp_isp1761_resources); platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 10a3e1d76891..4e57a8599265 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -289,6 +289,7 @@ static void __init realview_pba8_init(void) realview_eth_register(NULL, realview_pba8_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pba8_isp1761_resources); platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 9d75493e3f0c..d89eb4023467 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -29,6 +29,7 @@ #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <linux/reboot.h> +#include <linux/memblock.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -325,23 +326,19 @@ static void __init realview_pbx_timer_init(void) realview_pbx_twd_init(); } -static void realview_pbx_fixup(struct tag *tags, char **from, - struct meminfo *meminfo) +static void realview_pbx_fixup(struct tag *tags, char **from) { #ifdef CONFIG_SPARSEMEM /* * Memory configuration with SPARSEMEM enabled on RealView PBX (see * asm/mach/memory.h for more information). */ - meminfo->bank[0].start = 0; - meminfo->bank[0].size = SZ_256M; - meminfo->bank[1].start = 0x20000000; - meminfo->bank[1].size = SZ_512M; - meminfo->bank[2].start = 0x80000000; - meminfo->bank[2].size = SZ_256M; - meminfo->nr_banks = 3; + + memblock_add(0, SZ_256M); + memblock_add(0x20000000, SZ_512M); + memblock_add(0x80000000, SZ_256M); #else - realview_fixup(tags, from, meminfo); + realview_fixup(tags, from); #endif } @@ -370,8 +367,8 @@ static void __init realview_pbx_init(void) __io_address(REALVIEW_PBX_TILE_L220_BASE); /* set RAM latencies to 1 cycle for eASIC */ - writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); + writel(0, l2x0_base + L310_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L310_DATA_LATENCY_CTRL); /* 16KB way size, 8-way associativity, parity disabled * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */ @@ -385,6 +382,7 @@ static void __init realview_pbx_init(void) realview_eth_register(NULL, realview_pbx_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pbx_isp1761_resources); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h index e2e7c9dbb200..39bca96b555a 100644 --- a/arch/arm/mach-rockchip/core.h +++ b/arch/arm/mach-rockchip/core.h @@ -18,5 +18,3 @@ extern char rockchip_secondary_trampoline_end; extern unsigned long rockchip_boot_fn; extern void rockchip_secondary_startup(void); - -extern struct smp_operations rockchip_smp_ops; diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 072842f6491b..910835d4ccf4 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -178,7 +178,8 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) pmu_set_power_domain(0 + i, false); } -struct smp_operations rockchip_smp_ops __initdata = { +static struct smp_operations rockchip_smp_ops __initdata = { .smp_prepare_cpus = rockchip_smp_prepare_cpus, .smp_boot_secondary = rockchip_boot_secondary, }; +CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops); diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index d211d6fa0d98..968cc348e624 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -24,12 +24,6 @@ #include <asm/hardware/cache-l2x0.h> #include "core.h" -static void __init rockchip_dt_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * const rockchip_board_dt_compat[] = { "rockchip,rk2928", "rockchip,rk3066a", @@ -39,7 +33,7 @@ static const char * const rockchip_board_dt_compat[] = { }; DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") - .smp = smp_ops(rockchip_smp_ops), - .init_machine = rockchip_dt_init, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .dt_compat = rockchip_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 40cf50b9940c..04284de7aca5 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -18,6 +18,8 @@ config PLAT_S3C24XX help Base platform code for any Samsung S3C24XX device + + menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" @@ -26,8 +28,7 @@ config CPU_S3C2410 bool "SAMSUNG S3C2410" default y select CPU_ARM920T - select CPU_LLSERIAL_S3C2410 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM @@ -39,7 +40,7 @@ config CPU_S3C2410 config CPU_S3C2412 bool "SAMSUNG S3C2412" select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 + select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM help @@ -48,19 +49,16 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line config CPU_S3C2440 bool "SAMSUNG S3C2440" select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA help @@ -69,8 +67,7 @@ config CPU_S3C2440 config CPU_S3C2442 bool "SAMSUNG S3C2442" select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help @@ -84,26 +81,13 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line # common code -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. - -config S3C24XX_DCLK - bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures - config S3C24XX_SMDK bool help @@ -158,28 +142,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -# low-level serial option nodes - -config CPU_LLSERIAL_S3C2410_ONLY - bool - default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 - -config CPU_LLSERIAL_S3C2440_ONLY - bool - default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 - -config CPU_LLSERIAL_S3C2410 - bool - help - Selected if there is an S3C2410 (or register compatible) serial - low-level implementation needed - -config CPU_LLSERIAL_S3C2440 - bool - help - Selected if there is an S3C2440 (or register compatible) serial - low-level implementation needed - config S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" depends on ARM_S3C24XX_CPUFREQ @@ -258,8 +220,8 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ - select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -340,7 +302,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C24XX_DCLK + select S3C2410_COMMON_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -519,8 +481,8 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM + select S3C2410_COMMON_DCLK select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -558,9 +520,9 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST @@ -629,9 +591,9 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_DCLK select S3C24XX_PWM select S3C_DEV_NAND help @@ -641,12 +603,6 @@ endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_COMMON - bool - help - Common code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. - config S3C2443_DMA bool help diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 7f54e5b954ca..2235d0d3b38d 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o # PM @@ -44,16 +44,13 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_S3C24XX_DMA) += dma.o -obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o -obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o # diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c deleted file mode 100644 index 1edd9b2369c5..000000000000 --- a/arch/arm/mach-s3c24xx/clock-dclk.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (c) 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX - definitions for DCLK and CLKOUT registers - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (enable) - dclkcon |= clk->ctrlbit; - else - dclkcon &= ~clk->ctrlbit; - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} - -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} -static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) -{ - unsigned long div; - - if ((rate == 0) || !clk->parent) - return 0; - - div = clk_get_rate(clk->parent) / rate; - if (div < 2) - div = 2; - else if (div > 16) - div = 16; - - return div; -} - -static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return 0; - - return clk_get_rate(clk->parent) / div; -} - -static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return -EINVAL; - - if (clk == &s3c24xx_dclk0) { - mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | - S3C2410_DCLKCON_DCLK0_CMP_MASK; - data = S3C2410_DCLKCON_DCLK0_DIV(div) | - S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); - } else if (clk == &s3c24xx_dclk1) { - mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | - S3C2410_DCLKCON_DCLK1_CMP_MASK; - data = S3C2410_DCLKCON_DCLK1_DIV(div) | - S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); - } else - return -EINVAL; - - clk->rate = clk_get_rate(clk->parent) / div; - __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), - S3C24XX_DCLKCON); - return clk->rate; -} -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_mpll) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_clkout0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; - } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -static struct clk_ops dclk_ops = { - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, -}; - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .ctrlbit = S3C2410_DCLKCON_DCLK1EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -static struct clk_ops clkout_ops = { - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .ops = &clkout_ops, -}; - -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .ops = &clkout_ops, -}; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c deleted file mode 100644 index d1afcf9252d1..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410,S3C2440,S3C2442 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -int s3c2410_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2410_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - } -}; - -static struct clk clk_lcd = { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, -}; - -static struct clk clk_gpio = { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, -}; - -static struct clk clk_usb_host = { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, -}; - -static struct clk clk_usb_device = { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, -}; - -static struct clk clk_timers = { - .name = "timers", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, -}; - -struct clk s3c24xx_clk_uart0 = { - .name = "uart", - .devname = "s3c2410-uart.0", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, -}; - -struct clk s3c24xx_clk_uart1 = { - .name = "uart", - .devname = "s3c2410-uart.1", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, -}; - -struct clk s3c24xx_clk_uart2 = { - .name = "uart", - .devname = "s3c2410-uart.2", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, -}; - -static struct clk clk_rtc = { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, -}; - -static struct clk clk_watchdog = { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, -}; - -static struct clk clk_usb_bus_host = { - .name = "usb-bus-host", - .parent = &clk_usb_bus, -}; - -static struct clk clk_usb_bus_gadget = { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, -}; - -static struct clk *init_clocks[] = { - &clk_lcd, - &clk_gpio, - &clk_usb_host, - &clk_usb_device, - &clk_timers, - &s3c24xx_clk_uart0, - &s3c24xx_clk_uart1, - &s3c24xx_clk_uart2, - &clk_rtc, - &clk_watchdog, - &clk_usb_bus_host, - &clk_usb_bus_gadget, -}; - -/* s3c2410_baseclk_add() - * - * Add all the clocks used by the s3c2410 or compatible CPUs - * such as the S3C2440 and S3C2442. - * - * We cannot use a system device as we are needed before any - * of the init-calls that initialise the devices are actually - * done. -*/ - -int __init s3c2410_baseclk_add(void) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *xtal; - int ret; - int ptr; - - clk_upll.enable = s3c2410_upll_enable; - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) { - struct clk *clkp = init_clocks[ptr]; - - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - /* show the clock-slow value */ - - xtal = clk_get(NULL, "xtal"); - - printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", - print_mhz(clk_get_rate(xtal) / - ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), - (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", - (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", - (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); - - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c deleted file mode 100644 index 192a5b2550b0..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ /dev/null @@ -1,760 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412,S3C2413 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -static int s3c2412_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2412_upll_enable(struct clk *clk, int enable) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - unsigned long orig = upllcon; - - if (!enable) - upllcon |= S3C2412_PLLCON_OFF; - else - upllcon &= ~S3C2412_PLLCON_OFF; - - __raw_writel(upllcon, S3C2410_UPLLCON); - - /* allow ~150uS for the PLL to settle and lock */ - - if (enable && (orig & S3C2412_PLLCON_OFF)) - udelay(150); - - return 0; -} - -/* clock selections */ - -static struct clk clk_erefclk = { - .name = "erefclk", -}; - -static struct clk clk_urefclk = { - .name = "urefclk", -}; - -static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_urefclk) - clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL; - else if (parent == &clk_upll) - clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_usysclk = { - .name = "usysclk", - .parent = &clk_xtal, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_usysclk, - }, -}; - -static struct clk clk_mrefclk = { - .name = "mrefclk", - .parent = &clk_xtal, -}; - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_xtal, -}; - -static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_USBCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - if (div > 2) - div = 2; - - return parent_rate / div; -} - -static unsigned long s3c2412_getrate_usbsrc(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1); -} - -static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_usbsrc(clk, rate); - - if ((parent_rate / rate) == 2) - clkdivn |= S3C2412_CLKDIVN_USB48DIV; - else - clkdivn &= ~S3C2412_CLKDIVN_USB48DIV; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_usbsrc = { - .name = "usbsrc", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, - }, -}; - -static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_mdivclk) - clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_msysclk = { - .name = "msysclk", - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_msysclk, - }, -}; - -static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - unsigned long clkdiv; - unsigned long dvs; - - /* Note, we current equate fclk andf msysclk for S3C2412 */ - - if (parent == &clk_msysclk || parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2412_CLKDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - /* update this under irq lockdown, clkdivn is not protected - * by the clock system. */ - - local_irq_save(flags); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - clkdiv &= ~S3C2412_CLKDIVN_DVSEN; - clkdiv |= dvs; - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - local_irq_restore(flags); - - return 0; -} - -static struct clk clk_armclk = { - .name = "armclk", - .parent = &clk_msysclk, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_armclk, - }, -}; - -/* these next clocks have an divider immediately after them, - * so we can register them with their divider and leave out the - * intermediate clock stage -*/ -static unsigned long s3c2412_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations as they cancel out */ - - div = (rate / parent_rate); - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / div; -} - -static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_uart(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_UARTDIV_MASK; - div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_uart = { - .name = "uartclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_i2s(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_I2SDIV_MASK; - div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_i2s = { - .name = "i2sclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} -static unsigned long s3c2412_getrate_cam(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_CAMDIV_MASK; - div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_cam = { - .name = "camif-upll", /* same as 2440 name */ - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA3, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_LCDC, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBD, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_PWMT, - }, { - .name = "uart", - .devname = "s3c2412-uart.0", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2412-uart.1", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2412-uart.2", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART2, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_DEV48, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_HOST48, - } -}; - -/* clocks to add where we need to check their parentage */ - -struct clk_init { - struct clk *clk; - unsigned int bit; - struct clk *src_0; - struct clk *src_1; -}; - -static struct clk_init clks_src[] __initdata = { - { - .clk = &clk_usysclk, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_urefclk, - .src_1 = &clk_upll, - }, { - .clk = &clk_i2s, - .bit = S3C2412_CLKSRC_I2SCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_cam, - .bit = S3C2412_CLKSRC_CAMCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - }, { - .clk = &clk_msysclk, - .bit = S3C2412_CLKSRC_MSYSCLK_MPLL, - .src_0 = &clk_mdivclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_uart, - .bit = S3C2412_CLKSRC_UARTCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_usbsrc, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - /* here we assume OM[4] select xtal */ - }, { - .clk = &clk_erefclk, - .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, { - .clk = &clk_urefclk, - .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, -}; - -/* s3c2412_clk_initparents - * - * Initialise the parents for the clocks that we get at start-time -*/ - -static void __init s3c2412_clk_initparents(void) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - struct clk_init *cip = clks_src; - struct clk *src; - int ptr; - int ret; - - for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) { - ret = s3c24xx_register_clock(cip->clk); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - cip->clk->name, ret); - } - - src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0; - - printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name); - clk_set_parent(cip->clk, src); - } -} - -/* clocks to add straight away */ - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_usb_bus, - &clk_mrefclk, - &clk_armclk, -}; - -static struct clk_lookup s3c2412_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), -}; - -int __init s3c2412_baseclk_add(void) -{ - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - unsigned int dvs; - struct clk *clkp; - int ret; - int ptr; - - clk_upll.enable = s3c2412_upll_enable; - clk_usb_bus.parent = &clk_usbsrc; - clk_usb_bus.rate = 0x0; - - clk_f.parent = &clk_msysclk; - - s3c2412_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* set the dvs state according to what we got at boot time */ - - dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN; - - if (dvs) - clk_armclk.parent = &clk_h; - - printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off"); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n"); - - /* for the moment, let's use the UPLL, and see if we can - * get 48MHz */ - - clk_set_parent(&clk_usysclk, &clk_upll); - clk_set_parent(&clk_usbsrc, &clk_usysclk); - clk_set_rate(&clk_usbsrc, 48*1000*1000); - } - - printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_upll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2412_clkcon_enable(clkp, 0); - } - - clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c deleted file mode 100644 index d421a72920a5..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ /dev/null @@ -1,171 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/clock.c - * - * Copyright (c) 2010 Simtec Electronics - * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org> - * - * S3C2416 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/clk.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> -#include <plat/pll.h> - -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> -#include <mach/regs-s3c2443-clock.h> - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[8] = { - [0] = 1, - [1] = 2, - [2] = 3, - [3] = 4, - [5] = 6, - [7] = 8, -}; - -static struct clksrc_clk hsspi_eplldiv = { - .clk = { - .name = "hsspi-eplldiv", - .parent = &clk_esysclk.clk, - .ctrlbit = (1 << 14), - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 }, -}; - -static struct clk *hsspi_sources[] = { - [0] = &hsspi_eplldiv.clk, - [1] = NULL, /* to fix */ -}; - -static struct clksrc_clk hsspi_mux = { - .clk = { - .name = "hsspi-if", - }, - .sources = &(struct clksrc_sources) { - .sources = hsspi_sources, - .nr_sources = ARRAY_SIZE(hsspi_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 }, -}; - -static struct clksrc_clk hsmmc_div[] = { - [0] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.0", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, - }, - [1] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, - }, -}; - -static struct clksrc_clk hsmmc_mux0 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 6), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[0].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, -}; - -static struct clksrc_clk hsmmc_mux1 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 12), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[1].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, -}; - -static struct clk hsmmc0_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2416_HCLKCON_HSMMC0, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &hsspi_eplldiv, - &hsspi_mux, - &hsmmc_div[0], - &hsmmc_div[1], - &hsmmc_mux0, - &hsmmc_mux1, -}; - -static struct clk_lookup s3c2416_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), -}; - -void __init s3c2416_init_clocks(int xtal) -{ - u32 epllcon = __raw_readl(S3C2443_EPLLCON); - u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); - int ptr; - - /* s3c2416 EPLL compatible with s3c64xx */ - clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); - - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2416_get_pll, - armdiv, ARRAY_SIZE(armdiv), - S3C2416_CLKDIV0_ARMDIV_MASK); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c24xx_register_clock(&hsmmc0_clk); - clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup)); - -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c deleted file mode 100644 index 5527226fd61f..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* S3C2440 extended clock support */ - -static unsigned long s3c2440_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div = (parent_rate / rate) / 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2440_camif_upll_round(clk, rate); - - camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); - - if (rate != parent_rate) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static unsigned long s3c2440_camif_upll_getrate(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL)) - return parent_rate; - - camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK; - - return parent_rate / (camdivn + 1) / 2; -} - -/* Extra S3C2440 clocks */ - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_cam_upll = { - .name = "camif-upll", - .ops = &(struct clk_ops) { - .set_rate = s3c2440_camif_upll_setrate, - .get_rate = s3c2440_camif_upll_getrate, - .round_rate = s3c2440_camif_upll_round, - }, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_AC97, -}; - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) -{ - unsigned long ucon0, ucon1, ucon2, divisor; - - /* the fun of calculating the uart divisors on the s3c2440 */ - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) - divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; - else if (ucon1 != 0) - divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; - else if (ucon2 != 0) - divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; - else - /* manual calims 44, seems to be 9 */ - divisor = 9; - - return clk_get_rate(clk->parent) / divisor; -} - -static struct clk s3c2440_clk_fclk_n = { - .name = "fclk_n", - .parent = &clk_f, - .ops = &(struct clk_ops) { - .get_rate = s3c2440_fclk_n_getrate, - }, -}; - -static struct clk_lookup s3c2440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), - CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0), - CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1), - CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2), - CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), -}; - -static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2440_clk_cam.parent = clock_h; - s3c2440_clk_ac97.parent = clock_p; - s3c2440_clk_cam_upll.parent = clock_upll; - s3c24xx_register_clock(&s3c2440_clk_fclk_n); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_cam_upll); - clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_clk_add, -}; - -static __init int s3c24xx_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c deleted file mode 100644 index 76cd31f7804e..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ /dev/null @@ -1,212 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/clock.c - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/serial_core.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/cpu-freq.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -/* clock selections */ - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[16] = { - [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, - [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, - [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, - [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, - [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, - [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, - [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, - [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, -}; - -/* hsspi - * - * high-speed spi clock, sourced from esysclk -*/ - -static struct clksrc_clk clk_hsspi = { - .clk = { - .name = "hsspi-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_HSSPICLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - - -/* clk_hsmcc_div - * - * this clock is sourced from epll, and is fed through a divider, - * to a mux controlled by sclkcon where either it or a extclk can - * be fed to the hsmmc block -*/ - -static struct clksrc_clk clk_hsmmc_div = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, -}; - -static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); - - clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | - S3C2443_SCLKCON_HSMMCCLK_EPLL); - - if (parent == &clk_epll) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; - else if (parent == &clk_ext) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; - else - return -EINVAL; - - if (clk->usage > 0) { - __raw_writel(clksrc, S3C2443_SCLKCON); - } - - clk->parent = parent; - return 0; -} - -static int s3c2443_enable_hsmmc(struct clk *clk, int enable) -{ - return s3c2443_setparent_hsmmc(clk, clk->parent); -} - -static struct clk clk_hsmmc = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .parent = &clk_hsmmc_div.clk, - .enable = s3c2443_enable_hsmmc, - .ops = &(struct clk_ops) { - .set_parent = s3c2443_setparent_hsmmc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SDI, - }, { - .name = "spi", - .devname = "s3c2410-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI1, - } -}; - -/* clocks to add straight away */ - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_hsspi, - &clk_hsmmc_div, -}; - -static struct clk *clks[] __initdata = { - &clk_hsmmc, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), -}; - -void __init s3c2443_init_clocks(int xtal) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ptr; - - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, - armdiv, ARRAY_SIZE(armdiv), - S3C2443_CLKDIV0_ARMDIV_MASK); - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c deleted file mode 100644 index 6d9b688c442b..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c244x.c +++ /dev/null @@ -1,141 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440/S3C2442 Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long camdivn; - unsigned long dvs; - - if (parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2440_CAMDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - camdivn = __raw_readl(S3C2440_CAMDIVN); - camdivn &= ~S3C2440_CAMDIVN_DVSEN; - camdivn |= dvs; - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .ops = &(struct clk_ops) { - .set_parent = s3c2440_setparent_armclk, - }, -}; - -static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_upll; - int ret; - - printk("S3C244X: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; - - ret = s3c24xx_register_clock(&clk_arm); - if (ret < 0) { - printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); - return ret; - } - - clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); - return -ENOENT; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - spin_lock(&clocks_lock); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - spin_unlock(&clocks_lock); - } - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2440_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c2440_clk_init); - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c deleted file mode 100644 index 65d3eef73090..000000000000 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Common code for SoCs starting with the S3C2443 - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> - - -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, -}; - -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -static struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - -/* hclk divider - * - * divides the prediv and provides the hclk. - */ - -static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_h_ops = { - .get_rate = s3c2443_hclkdiv_getrate, -}; - -/* pclk divider - * - * divides the hclk and provides the pclk. - */ - -static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0); - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_p_ops = { - .get_rate = s3c2443_pclkdiv_getrate, -}; - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. -*/ - -static unsigned int *armdiv; -static int nr_armdiv; -static int armdivmask; - -static unsigned long s3c2443_armclk_roundrate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned best = 256; /* bigger than any value */ - unsigned div; - int ptr; - - if (!nr_armdiv) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) - best = div; - } - } - - return parent / best; -} - -static unsigned long s3c2443_armclk_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkcon0; - int val; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= armdivmask; - val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT; - - return rate / armdiv[val]; -} - -static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned div; - unsigned best = 256; /* bigger than any value */ - int ptr; - int val = -1; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) { - best = div; - val = ptr; - } - } - } - - if (val >= 0) { - unsigned long clkcon0; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= ~armdivmask; - clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; - __raw_writel(clkcon0, S3C2443_CLKDIV0); - } - - return (val == -1) ? -EINVAL : 0; -} - -static struct clk clk_armdiv = { - .name = "armdiv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .round_rate = s3c2443_armclk_roundrate, - .get_rate = s3c2443_armclk_getrate, - .set_rate = s3c2443_armclk_setrate, - }, -}; - -/* armclk - * - * this is the clock fed into the ARM core itself, from armdiv or from hclk. - */ - -static struct clk *clk_arm_sources[] = { - [0] = &clk_armdiv, - [1] = &clk_h, -}; - -static struct clksrc_clk clk_arm = { - .clk = { - .name = "armclk", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_arm_sources, - .nr_sources = ARRAY_SIZE(clk_arm_sources), - }, - .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, -}; - -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - -/* common clksrc clocks */ - -static struct clksrc_clk clksrc_clks[] = { - { - /* camera interface bus-clock, divided down from esysclk */ - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, - }, { - .clk = { - .name = "display-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, - }, -}; - -static struct clksrc_clk clk_esys_uart = { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -static struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma.4", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma.5", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "cfc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "uart", - .devname = "s3c2440-uart.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2440-uart.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2440-uart.2", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .devname = "s3c2440-uart.3", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - }, { - .name = "nand", - .parent = &clk_h, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus_host.clk, - } -}; - -static struct clk hsmmc1_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, -}; - -static struct clk hsspi_clk = { - .name = "spi", - .devname = "s3c2443-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_HSSPI, -}; - -/* EPLLCON compatible enough to get on/off information */ - -void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - int ptr; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - clk_mpll.rate = pll; - - printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)), - print_mhz(clk_get_rate(&clk_h)), - print_mhz(clk_get_rate(&clk_p))); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(&clksrc_clks[ptr], true); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); -} - -static struct clk *clks[] __initdata = { - &clk_prediv, - &clk_mpllref, - &clk_mdivclk, - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_armdiv, - &hsmmc1_clk, - &hsspi_clk, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_i2s_eplldiv, - &clk_i2s, - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, - &clk_arm, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), -}; - -void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask) -{ - int ptr; - - armdiv = divs; - nr_armdiv = nr_divs; - armdivmask = divmask; - - /* s3c2443 parents h clock from prediv */ - clk_h.parent = &clk_prediv; - clk_h.ops = &clk_h_ops; - - /* and p clock from h clock */ - clk_p.parent = &clk_h; - clk_p.ops = &clk_p_ops; - - clk_usb_bus.parent = &clk_usb_bus_host.clk; - clk_epll.parent = &clk_epllref.clk; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - /* See s3c2443/etc notes on disabling clocks at init time */ - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); - - s3c2443_common_setup_clocks(get_mpll); -} diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 1bc8e73c94f9..c0763b837745 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -53,6 +53,7 @@ #include <plat/cpu-freq.h> #include <plat/pll.h> #include <plat/pwm-core.h> +#include <plat/watchdog-reset.h> #include "common.h" @@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410000, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410_init, .name = name_s3c2410 @@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410002, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410a_init, .name = name_s3c2410a @@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440000, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440 @@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440001, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440a @@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aaa, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442 @@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aab, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442b @@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412003, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32450003, .idmask = 0xffffffff, .map_io = s3c2416_map_io, - .init_clocks = s3c2416_init_clocks, .init_uarts = s3c2416_init_uarts, .init = s3c2416_init, .name = name_s3c2416, @@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32443001, .idmask = 0xffffffff, .map_io = s3c2443_map_io, - .init_clocks = s3c2443_init_clocks, .init_uarts = s3c2443_init_uarts, .init = s3c2443_init, .name = name_s3c2443, @@ -316,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* initialise all the clocks */ - -void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, - unsigned long hclk, - unsigned long pclk) -{ - clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), - clk_xtal.rate); - - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; -} - #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) static struct resource s3c2410_dma_resource[] = { @@ -534,3 +510,62 @@ struct platform_device s3c2443_device_dma = { }, }; #endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410) +void __init s3c2410_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +void __init s3c2412_init_clocks(int xtal) +{ + s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#ifdef CONFIG_CPU_S3C2416 +void __init s3c2416_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440) +void __init s3c2440_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442) +void __init s3c2442_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2443 +void __init s3c2443_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dclk_resource[] = { + [0] = DEFINE_RES_MEM(0x56000084, 0x4), +}; + +struct platform_device s3c2410_device_dclk = { + .name = "s3c2410-dclk", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dclk_resource), + .resource = s3c2410_dclk_resource, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index e46c10417216..ac3ff12a0601 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops; #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) extern void s3c244x_map_io(void); extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c244x_init_clocks(int xtal); extern void s3c244x_restart(enum reboot_mode mode, const char *cmd); #else -#define s3c244x_init_clocks NULL #define s3c244x_init_uarts NULL #endif #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); extern void s3c2440_map_io(void); +extern void s3c2440_init_clocks(int xtal); extern void s3c2440_init_irq(void); #else #define s3c2440_init NULL @@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void); #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); extern void s3c2442_map_io(void); +extern void s3c2442_init_clocks(int xtal); extern void s3c2442_init_irq(void); #else #define s3c2442_init NULL @@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma; extern struct platform_device s3c2440_device_dma; extern struct platform_device s3c2443_device_dma; +extern struct platform_device s3c2410_device_dclk; + +#ifdef CONFIG_S3C2410_COMMON_CLK +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2412_COMMON_CLK +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2443_COMMON_CLK +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 2a0aa5684e72..d4d9514335f4 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/cpufreq.h> #include <linux/io.h> +#include <linux/clk.h> #include <mach/map.h> #include <mach/regs-clock.h> @@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) */ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) { - __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON); + if (!IS_ERR(cfg->mpll)) + clk_set_rate(cfg->mpll, cfg->pll.frequency); } diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S deleted file mode 100644 index 2f39737544c0..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ /dev/null @@ -1,101 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2005 Simtec Electronics - * - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/map.h> -#include <mach/regs-gpio.h> -#include <linux/serial_s3c.h> - -#define S3C2410_UART1_OFF (0x4000) -#define SHIFT_2440TXF (14-9) - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C24XX_PA_UART - ldr \rv, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - - .macro fifo_full_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 1004f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? -1004: - ldr \rd, [\rx, # S3C2410_UFSTAT] - moveq \rd, \rd, lsr #SHIFT_2440TXF - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - - .macro fifo_full_s3c2410 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - -/* fifo level reading */ - - .macro fifo_level_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 10000f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? - -10000: - ldr \rd, [\rx, # S3C2410_UFSTAT] - andne \rd, \rd, #S3C2410_UFSTAT_TXMASK - andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - - .macro fifo_level_s3c2410 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - and \rd, \rd, #S3C2410_UFSTAT_TXMASK - .endm - -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) -#define fifo_full fifo_full_s3c24xx -#define fifo_level fifo_level_s3c24xx -#endif - -/* include the reset of the code which will do the work */ - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index 3415b60082d7..3db6c10de023 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h @@ -42,24 +42,6 @@ #define S3C2410_CLKCON_IIS (1<<17) #define S3C2410_CLKCON_SPI (1<<18) -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index c2ef016032ab..c6583cfa5835 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -457,9 +457,6 @@ /* miscellaneous control */ #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) /* see clock.h for dclk definitions */ diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 8ac9554aa996..5157e250dd13 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = { static void __init amlm5900_map_io(void) { s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init amlm5900_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + #ifdef CONFIG_FB_S3C2410 static struct s3c2410fb_display __initdata amlm5900_lcd_info = { .width = 160, @@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900") .map_io = amlm5900_map_io, .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = samsung_timer_init, + .init_time = amlm5900_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 81a270af2336..e053581cab0b 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -46,7 +46,6 @@ #include <net/ax88796.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> @@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = { /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, @@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -static struct clk *anubis_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - /* I2C devices. */ static struct i2c_board_info anubis_i2c_devs[] __initdata = { @@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { static void __init anubis_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -428,6 +404,12 @@ static void __init anubis_map_io(void) } } +static void __init anubis_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); @@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = anubis_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index d8f6bb1096cb..9db768f448a5 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -45,7 +45,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init at2440evb_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); @@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = at2440evb_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index e371ff53a408..f9112b801a33 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -51,7 +51,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = { // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -static struct clk *bast_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata bast_cpufreq = { .refresh = 7800, /* 7.8usec */ .auto_io = 1, @@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { static void __init bast_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_hwmon_set_platdata(&bast_hwmon_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init bast_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init bast_init(void) { register_syscore_ops(&bast_pm_syscore_ops); @@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST") .map_io = bast_map_io, .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = samsung_timer_init, + .init_time = bast_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index dc4db849f0fd..fc3a08d0cb3f 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = { static void __init gta02_map_io(void) { s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -585,6 +584,11 @@ static void __init gta02_machine_init(void) regulator_has_full_constraints(); } +static void __init gta02_init_time(void) +{ + s3c2442_init_clocks(12000000); + samsung_timer_init(); +} MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ @@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .map_io = gta02_map_io, .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = samsung_timer_init, + .init_time = gta02_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index e453acd92cbf..fbf5487ae5d1 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -57,7 +57,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> @@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = { static void __init h1940_map_io(void) { s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -662,6 +660,12 @@ static void __init h1940_map_io(void) WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } +static void __init h1940_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init h1940_reserve(void) { @@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .reserve = h1940_reserve, .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = samsung_timer_init, + .init_time = h1940_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 5faa7239e7d6..e81ea82c55f9 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = { static void __init jive_map_io(void) { s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init jive_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void jive_power_off(void) { printk(KERN_INFO "powering system down...\n"); @@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE") .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = samsung_timer_init, + .init_time = jive_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 9e57fd9f4f3b..5cc40ec1d254 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -54,7 +54,6 @@ #include <linux/mtd/partitions.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = { static void __init mini2440_map_io(void) { s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init mini2440_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + /* * mini2440_features string * @@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440") .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = mini2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 4cccaad34847..3ac2a54348d6 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -45,7 +45,6 @@ #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -535,11 +534,16 @@ static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); n30_hwinit(); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init n30_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* GPB3 is the line that controls the pull-up for the USB D+ line */ static void __init n30_init(void) @@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, @@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 3066851f584d..c82c281ce351 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -42,7 +42,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void) static void __init nexcoder_map_io(void) { s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } +static void __init nexcoder_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init nexcoder_init(void) { s3c_i2c0_set_platdata(NULL); @@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = nexcoder_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index a4ae4bb3666d..189147b80eca 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -40,7 +40,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = { /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_i2c0, &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, }; -static struct clk *osiris_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata osiris_cpufreq = { .refresh = 7800, /* refresh period is 7.8usec */ .auto_io = 1, @@ -368,23 +360,7 @@ static void __init osiris_map_io(void) { unsigned long flags; - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -408,6 +384,12 @@ static void __init osiris_map_io(void) local_irq_restore(flags); } +static void __init osiris_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init osiris_init(void) { register_syscore_ops(&osiris_pm_syscore_ops); @@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .map_io = osiris_map_io, .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = samsung_timer_init, + .init_time = osiris_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index bdb3faac2d9b..45833001186d 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = { static void __init otom11_map_io(void) { s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init otom11_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init otom11_init(void) { s3c_i2c0_set_platdata(NULL); @@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = otom11_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 8c12787a8fd3..228c9094519d 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup); static void __init qt2410_map_io(void) { s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); - s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init qt2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init qt2410_machine_init(void) { s3c_nand_set_platdata(&qt2410_nand_info); @@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410") .map_io = qt2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = samsung_timer_init, + .init_time = qt2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index afb784e934c8..e2c6541909c1 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -54,7 +54,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = { }; static struct platform_device *rx1950_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, @@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = { &rx1950_leds, }; -static struct clk *rx1950_clocks[] __initdata = { - &s3c24xx_clkout0, - &s3c24xx_clkout1, -}; - static void __init rx1950_map_io(void) { - s3c24xx_clkout0.parent = &clk_h; - s3c24xx_clkout1.parent = &clk_f; - - s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); - s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -754,6 +743,12 @@ static void __init rx1950_map_io(void) s3c_pm_init(); } +static void __init rx1950_init_time(void) +{ + s3c2442_init_clocks(16934000); + samsung_timer_init(); +} + static void __init rx1950_init_machine(void) { int i; @@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .reserve = rx1950_reserve, .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = samsung_timer_init, + .init_time = rx1950_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index e6535ce1bc5c..6e749ec3a2ea 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -46,7 +46,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = { static void __init rx3715_map_io(void) { s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init rx3715_init_time(void) +{ + s3c2440_init_clocks(16934000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init rx3715_reserve(void) { @@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .reserve = rx3715_reserve, .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = samsung_timer_init, + .init_time = rx3715_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 70f0900d4bca..e4dcb9aa2ca2 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -18,7 +18,6 @@ #include <linux/clocksource.h> #include <linux/irqchip.h> #include <linux/of_platform.h> -#include <linux/serial_core.h> #include <linux/serial_s3c.h> #include <asm/mach/arch.h> @@ -29,48 +28,14 @@ #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the S3C2416 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, - "s3c2440-uart.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, - "s3c2440-uart.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, - "s3c2440-uart.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, - "s3c2440-uart.3", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, - "s3c-sdhci.0", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, - "s3c-sdhci.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, - "s3c2440-i2c.0", NULL), - {}, -}; - static void __init s3c2416_dt_map_io(void) { s3c24xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); } static void __init s3c2416_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - s3c2416_auxdata_lookup, NULL); - + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); s3c_pm_init(); } @@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") .map_io = s3c2416_dt_map_io, .init_irq = irqchip_init, .init_machine = s3c2416_dt_machine_init, - .init_time = clocksource_of_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index f32924ee0e9f..419fadd6e446 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = { static void __init smdk2410_map_io(void) { s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2410_init(void) { s3c_i2c0_set_platdata(NULL); @@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .map_io = smdk2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = samsung_timer_init, + .init_time = smdk2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 233fe52d2015..fb3b80e44595 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -22,6 +22,7 @@ #include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/memblock.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -93,24 +94,26 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c2412_device_dma, }; -static void __init smdk2413_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init smdk2413_fixup(struct tag *tags, char **cmdline) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - mi->nr_banks=1; - mi->bank[0].start = 0x30000000; - mi->bank[0].size = SZ_64M; + memblock_add(0x30000000, SZ_64M); } } static void __init smdk2413_map_io(void) { s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2413_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -159,6 +162,6 @@ MACHINE_START(SMDK2413, "SMDK2413") .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2413_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index b3b54d8e1410..fa6f30d23601 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c2443_device_dma, }; +static void __init smdk2416_init_time(void) +{ + s3c2416_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2416_map_io(void) { s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2416_init_time, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index d071dcfea548..5fb89c0ae17a 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -38,7 +38,6 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = { static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2440_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); @@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440") .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 06c4d77de3a5..ef5d5ea33182 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = { static void __init smdk2443_map_io(void) { s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2443_init_time(void) +{ + s3c2443_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2443_machine_init(void) { s3c_i2c0_set_platdata(NULL); @@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2443_init_time, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 4108b2f0cede..c616ca2d409e 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = { static void __init tct_hammer_map_io(void) { s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init tct_hammer_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init tct_hammer_init(void) { s3c_i2c0_set_platdata(NULL); @@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .map_io = tct_hammer_map_io, .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = samsung_timer_init, + .init_time = tct_hammer_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 1cc5b1bd51cd..f88c584c3001 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -43,7 +43,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = { /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -static struct clk *vr1000_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static void vr1000_power_off(void) { gpio_direction_output(S3C2410_GPB(9), 1); @@ -314,29 +306,19 @@ static void vr1000_power_off(void) static void __init vr1000_map_io(void) { - /* initialise clock sources */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = NULL; - s3c24xx_dclk1.rate = 3692307; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks)); - pm_power_off = vr1000_power_off; s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vr1000_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vr1000_init(void) { s3c_i2c0_set_platdata(NULL); @@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = vr1000_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 40868c0e0a68..9104c2be36c9 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -23,6 +23,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <linux/memblock.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -129,24 +130,26 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c2412_device_dma, }; -static void __init vstms_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init vstms_fixup(struct tag *tags, char **cmdline) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - mi->nr_banks=1; - mi->bank[0].start = 0x30000000; - mi->bank[0].size = SZ_64M; + memblock_add(0x30000000, SZ_64M); } } static void __init vstms_map_io(void) { s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vstms_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); @@ -162,6 +165,6 @@ MACHINE_START(VSTMS, "VSTMS") .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = samsung_timer_init, + .init_time = vstms_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 68ea5b7e5dc7..b19256ec8d40 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -51,9 +51,6 @@ #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - /* we restore the timings here, with the proviso that the board * brings the system up in an slower, or equal frequency setting * to the original system. @@ -69,18 +66,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON3), SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_REFRESH), -#endif - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), -}; - -static struct sleep_save misc_save[] = { - SAVE_ITEM(S3C2410_DCLKCON), }; /* s3c_pm_check_resume_pin @@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void) void s3c_pm_restore_core(void) { s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); } void s3c_pm_save_core(void) { - s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 04b58cb49888..7eab88829883 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -85,62 +85,6 @@ void __init s3c2410_map_io(void) void __init_or_cpufreq s3c2410_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -/* fake ARMCLK for use with cpufreq, etc. */ - -static struct clk s3c2410_armclk = { - .name = "armclk", - .parent = &clk_f, - .id = -1, -}; - -static struct clk_lookup s3c2410_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), -}; - -void __init s3c2410_init_clocks(int xtal) -{ - s3c24xx_register_baseclocks(xtal); - s3c2410_setup_clocks(); - s3c2410_baseclk_add(); - s3c24xx_register_clock(&s3c2410_armclk); - clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } struct bus_type s3c2410_subsys = { diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 657cbaca80ac..d49f52fbc842 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -173,49 +173,6 @@ void __init s3c2412_map_io(void) void __init_or_cpufreq s3c2412_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); - - clk_mpll.rate = fclk; - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c2412_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_register_baseclocks(xtal); - s3c2412_setup_clocks(); - s3c2412_baseclk_add(); } /* need to register the subsystem before we actually register the device, and diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 2c8adc028538..fb9da2b603a2 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -53,117 +53,6 @@ #include "common.h" -/* S3C2442 extended clock support */ - -static unsigned long s3c2442_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - - if (div == 3) - return parent_rate / 3; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div /= 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2442_camif_upll_round(clk, rate); - - camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; - - if (rate == parent_rate) { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; - } else if ((parent_rate / rate) == 3) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; - } else { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2442 clocks */ - -static struct clk s3c2442_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2442_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .ops = &(struct clk_ops) { - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, - }, -}; - -static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2442_clk_cam.parent = clock_h; - s3c2442_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2442_clk_cam); - s3c24xx_register_clock(&s3c2442_clk_cam_upll); - - clk_disable(&s3c2442_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c2442_clk_add, -}; - -static __init int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); - - static struct device s3c2442_dev = { .bus = &s3c2442_subsys, }; diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index fe30ebb234d2..4a64bcc9eb51 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -46,6 +46,7 @@ #include <plat/nand-core.h> #include <plat/watchdog-reset.h> +#include "common.h" #include "regs-dsc.h" static struct map_desc s3c244x_iodesc[] __initdata = { @@ -74,67 +75,11 @@ void __init s3c244x_map_io(void) s3c_nand_setname("s3c2440-nand"); s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; + s3c2410_device_dclk.name = "s3c2440-dclk"; } void __init_or_cpufreq s3c244x_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long clkdiv; - unsigned long camdiv; - unsigned long xtal; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c244x_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_register_baseclocks(xtal); - s3c244x_setup_clocks(); - s3c2410_baseclk_add(); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } /* Since the S3C2442 and S3C2440 share items, put both subsystems here */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index b41a38a75844..c1ce921c4088 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -49,11 +49,6 @@ #include <plat/clock.h> #include <plat/samsung-time.h> #include <plat/mfc.h> -#include <plat/camport.h> - -#include <media/v4l2-mediabus.h> -#include <media/s5p_fimc.h> -#include <media/noon010pc30.h> #include "common.h" @@ -239,14 +234,6 @@ static void __init goni_radio_init(void) /* TSP */ static struct mxt_platform_data qt602240_platform_data = { - .x_line = 17, - .y_line = 11, - .x_size = 800, - .y_size = 480, - .blen = 0x21, - .threshold = 0x28, - .voltage = 2800000, /* 2.8V */ - .orient = MXT_DIAGONAL, .irqflags = IRQF_TRIGGER_FALLING, }; @@ -285,14 +272,6 @@ static void __init goni_tsp_init(void) /* USB OTG */ static struct s3c_hsotg_plat goni_hsotg_pdata; -static void goni_camera_init(void) -{ - s5pv210_fimc_setup_gpio(S5P_CAMPORT_A); - - /* Set max driver strength on CAM_A_CLKOUT pin. */ - s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4); -} - /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) @@ -825,34 +804,6 @@ static void goni_setup_sdhci(void) s3c_sdhci2_set_platdata(&goni_hsmmc2_data); }; -static struct noon010pc30_platform_data noon010pc30_pldata = { - .clk_rate = 16000000UL, - .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */ - .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */ -}; - -static struct i2c_board_info noon010pc30_board_info = { - I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1), - .platform_data = &noon010pc30_pldata, -}; - -static struct fimc_source_info goni_camera_sensors[] = { - { - .mux_id = 0, - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, - .board_info = &noon010pc30_board_info, - .i2c_bus_num = 0, - .clk_frequency = 16000000UL, - }, -}; - -static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { - .source_info = goni_camera_sensors, - .num_clients = ARRAY_SIZE(goni_camera_sensors), -}; - /* Audio device */ static struct platform_device goni_device_audio = { .name = "smdk-audio", @@ -874,10 +825,6 @@ static struct platform_device *goni_devices[] __initdata = { &s5p_device_mixer, &s5p_device_sdo, &s3c_device_i2c0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -946,14 +893,8 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); - /* FIMC */ - s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata), - &s5p_device_fimc_md); - s3c_hsotg_set_platdata(&goni_hsotg_pdata); - goni_camera_init(); - /* SPI */ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 8443a27bca2f..7dd894ece9ae 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -531,7 +531,7 @@ static void __init get_assabet_scr(void) } static void __init -fixup_assabet(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_assabet(struct tag *tags, char **cmdline) { /* This must be done before any call to machine_has_neponset() */ map_sa1100_gpio_regs(); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0f92ba8e7884..dbd954e61aa7 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ARM_GIC - select MIGHT_HAVE_PCI select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select NO_IOPORT_MAP select PINCTRL @@ -108,6 +107,7 @@ config ARCH_R8A7778 select SH_CLK_CPG select ARM_GIC select SYS_SUPPORTS_SH_TMU + select RENESAS_INTC_IRQPIN config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" @@ -140,16 +140,6 @@ config ARCH_R8A7791 select SYS_SUPPORTS_SH_CMT select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -config ARCH_EMEV2 - bool "Emma Mobile EV2" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select CPU_V7 - select MIGHT_HAVE_PCI - select USE_OF - select AUTO_ZRELADDR - select SYS_SUPPORTS_EM_STI - config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -205,8 +195,8 @@ config MACH_ARMADILLO800EVA_REFERENCE select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF ---help--- - Use reference implementation of Aramdillo800 EVA board support - which makes a greater use of device tree at the expense + Use reference implementation of Armadillo800 EVA board support + which makes greater use of device tree at the expense of not supporting a number of devices. This is intended to aid developers @@ -216,7 +206,6 @@ config MACH_BOCKW depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select RENESAS_INTC_IRQPIN select SND_SOC_AK4554 if SND_SIMPLE_CARD select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF @@ -225,7 +214,6 @@ config MACH_BOCKW_REFERENCE bool "BOCK-W - Reference Device Tree Implementation" depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB - select RENESAS_INTC_IRQPIN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF ---help--- @@ -240,17 +228,6 @@ config MACH_GENMAI depends on ARCH_R7S72100 select USE_OF -config MACH_GENMAI_REFERENCE - bool "Genmai board - Reference Device Tree Implementation" - depends on ARCH_R7S72100 - select USE_OF - ---help--- - Use reference implementation of Genmai board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 4caffc912a81..38d5fe825e93 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -21,8 +21,8 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o # Clock objects -ifndef CONFIG_COMMON_CLK obj-y += clock.o +ifndef CONFIG_COMMON_CLK obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o @@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o -obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o endif @@ -67,7 +66,6 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_GENMAI) += board-genmai.o -obj-$(CONFIG_MACH_GENMAI_REFERENCE) += board-genmai-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 99455ecafa05..918fccffa1b6 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -7,7 +7,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000 -loadaddr-$(CONFIG_MACH_GENMAI_REFERENCE) += 0x08008000 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c index 57d1a78367b6..f660fbb96e0b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -164,8 +164,8 @@ static void __init eva_init(void) r8a7740_meram_workaround(); #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); + /* Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); #endif r8a7740_add_standard_devices_dt(); @@ -187,7 +187,7 @@ static const char *eva_boards_compat_dt[] __initdata = { DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference") .map_io = r8a7740_map_io, - .init_early = r8a7740_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = eva_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 486063db2a2f..30fcac73a540 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -31,7 +31,7 @@ #include <linux/gpio_keys.h> #include <linux/regulator/driver.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/pwm-renesas-tpu.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/fixed.h> #include <linux/regulator/gpio-regulator.h> @@ -399,24 +399,16 @@ static struct resource pwm_resources[] = { }, }; -static struct tpu_pwm_platform_data pwm_device_data = { - .channels[2] = { - .polarity = PWM_POLARITY_INVERSED, - } -}; - static struct platform_device pwm_device = { .name = "renesas-tpu-pwm", .id = -1, - .dev = { - .platform_data = &pwm_device_data, - }, .num_resources = ARRAY_SIZE(pwm_resources), .resource = pwm_resources, }; static struct pwm_lookup pwm_lookup[] = { - PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL), + PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL, + 33333, PWM_POLARITY_INVERSED), }; /* LCDC and backlight */ @@ -1017,7 +1009,7 @@ static struct asoc_simple_card_info fsi2_hdmi_info = { .platform = "sh_fsi2", .cpu_dai = { .name = "fsib-dai", - .fmt = SND_SOC_DAIFMT_CBM_CFM, + .fmt = SND_SOC_DAIFMT_CBS_CFS, }, .codec_dai = { .name = "sh_mobile_hdmi-hifi", @@ -1271,8 +1263,8 @@ static void __init eva_init(void) #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); + /* Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); @@ -1300,11 +1292,6 @@ static void __init eva_earlytimer_init(void) eva_clock_init(); } -static void __init eva_add_early_devices(void) -{ - r8a7740_add_early_devices(); -} - #define RESCNT2 IOMEM(0xe6188020) static void eva_restart(enum reboot_mode mode, const char *cmd) { @@ -1319,7 +1306,7 @@ static const char *eva_boards_compat_dt[] __initdata = { DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .map_io = r8a7740_map_io, - .init_early = eva_add_early_devices, + .init_early = r8a7740_add_early_devices, .init_irq = r8a7740_init_irq_of, .init_machine = eva_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index b4122f8cb8d9..f444be2f241e 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -345,24 +345,39 @@ static struct rsnd_ssi_platform_info rsnd_ssi[] = { RSND_SSI_UNUSED, /* SSI 0 */ RSND_SSI_UNUSED, /* SSI 1 */ RSND_SSI_UNUSED, /* SSI 2 */ - RSND_SSI_SET(1, HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), RSND_SSI_PLAY), - RSND_SSI_SET(2, HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE), - RSND_SSI_SET(0, HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), RSND_SSI_PLAY), - RSND_SSI_SET(0, HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0), - RSND_SSI_SET(3, HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), RSND_SSI_PLAY), - RSND_SSI_SET(4, HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE), + RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0), + RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE), + RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0), + RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0), + RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0), + RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE), }; -static struct rsnd_scu_platform_info rsnd_scu[9] = { - { .flags = 0, }, /* SRU 0 */ - { .flags = 0, }, /* SRU 1 */ - { .flags = 0, }, /* SRU 2 */ - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, +static struct rsnd_src_platform_info rsnd_src[9] = { + RSND_SRC_UNUSED, /* SRU 0 */ + RSND_SRC_UNUSED, /* SRU 1 */ + RSND_SRC_UNUSED, /* SRU 2 */ + RSND_SRC(0, 0), + RSND_SRC(0, 0), + RSND_SRC(0, 0), + RSND_SRC(0, 0), + RSND_SRC(0, 0), + RSND_SRC(0, 0), +}; + +static struct rsnd_dai_platform_info rsnd_dai[] = { + { + .playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] }, + .capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] }, + }, { + .playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] }, + }, { + .capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] }, + }, { + .playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] }, + }, { + .capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] }, + }, }; enum { @@ -437,8 +452,10 @@ static struct rcar_snd_info rsnd_info = { .flags = RSND_GEN1, .ssi_info = rsnd_ssi, .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), - .scu_info = rsnd_scu, - .scu_info_nr = ARRAY_SIZE(rsnd_scu), + .src_info = rsnd_src, + .src_info_nr = ARRAY_SIZE(rsnd_src), + .dai_info = rsnd_dai, + .dai_info_nr = ARRAY_SIZE(rsnd_dai), .start = rsnd_start, .stop = rsnd_stop, }; @@ -591,6 +608,7 @@ static void __init bockw_init(void) { void __iomem *base; struct clk *clk; + struct platform_device *pdev; int i; r8a7778_clock_init(); @@ -673,9 +691,6 @@ static void __init bockw_init(void) } /* for Audio */ - clk = clk_get(NULL, "audio_clk_b"); - clk_set_rate(clk, 24576000); - clk_put(clk); rsnd_codec_power(5, 1); /* enable ak4642 */ platform_device_register_simple( @@ -684,11 +699,15 @@ static void __init bockw_init(void) platform_device_register_simple( "ak4554-adc-dac", 1, NULL, 0); - platform_device_register_resndata( + pdev = platform_device_register_resndata( &platform_bus, "rcar_sound", -1, rsnd_resources, ARRAY_SIZE(rsnd_resources), &rsnd_info, sizeof(rsnd_info)); + clk = clk_get(&pdev->dev, "clk_b"); + clk_set_rate(clk, 24576000); + clk_put(clk); + for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) { struct platform_device_info cardinfo = { .parent = &platform_bus, diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c index 7630c1053e32..2ff6ad6e608e 100644 --- a/arch/arm/mach-shmobile/board-genmai-reference.c +++ b/arch/arm/mach-shmobile/board-genmai-reference.c @@ -18,27 +18,31 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clk-provider.h> #include <linux/kernel.h> #include <linux/of_platform.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/r7s72100.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* + * This is a really crude hack to provide clkdev support to platform + * devices until they get moved to DT. + */ +static const struct clk_name clk_names[] = { + { "mtu2", "fck", "sh-mtu2" }, +}; + static void __init genmai_add_standard_devices(void) { -#ifdef CONFIG_COMMON_CLK - of_clk_init(NULL); -#else - r7s72100_clock_init(); -#endif + shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), true); r7s72100_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const genmai_boards_compat_dt[] __initconst = { - "renesas,genmai-reference", + "renesas,genmai", NULL, }; diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c index 6c328d63b819..c94201ee8596 100644 --- a/arch/arm/mach-shmobile/board-genmai.c +++ b/arch/arm/mach-shmobile/board-genmai.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/serial_sci.h> #include <linux/sh_eth.h> #include <linux/spi/rspi.h> #include <linux/spi/spi.h> @@ -89,6 +90,40 @@ static const struct spi_board_info spi_info[] __initconst = { }, }; +/* SCIF */ +#define R7S72100_SCIF(index, baseaddr, irq) \ +static const struct plat_sci_port scif##index##_platform_data = { \ + .type = PORT_SCIF, \ + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \ + SCSCR_REIE, \ +}; \ + \ +static struct resource scif##index##_resources[] = { \ + DEFINE_RES_MEM(baseaddr, 0x100), \ + DEFINE_RES_IRQ(irq + 1), \ + DEFINE_RES_IRQ(irq + 2), \ + DEFINE_RES_IRQ(irq + 3), \ + DEFINE_RES_IRQ(irq), \ +} \ + +R7S72100_SCIF(0, 0xe8007000, gic_iid(221)); +R7S72100_SCIF(1, 0xe8007800, gic_iid(225)); +R7S72100_SCIF(2, 0xe8008000, gic_iid(229)); +R7S72100_SCIF(3, 0xe8008800, gic_iid(233)); +R7S72100_SCIF(4, 0xe8009000, gic_iid(237)); +R7S72100_SCIF(5, 0xe8009800, gic_iid(241)); +R7S72100_SCIF(6, 0xe800a000, gic_iid(245)); +R7S72100_SCIF(7, 0xe800a800, gic_iid(249)); + +#define r7s72100_register_scif(index) \ + platform_device_register_resndata(&platform_bus, "sh-sci", index, \ + scif##index##_resources, \ + ARRAY_SIZE(scif##index##_resources), \ + &scif##index##_platform_data, \ + sizeof(scif##index##_platform_data)) + static void __init genmai_add_standard_devices(void) { r7s72100_clock_init(); @@ -102,6 +137,15 @@ static void __init genmai_add_standard_devices(void) r7s72100_register_rspi(3); r7s72100_register_rspi(4); spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); + + r7s72100_register_scif(0); + r7s72100_register_scif(1); + r7s72100_register_scif(2); + r7s72100_register_scif(3); + r7s72100_register_scif(4); + r7s72100_register_scif(5); + r7s72100_register_scif(6); + r7s72100_register_scif(7); } static const char * const genmai_boards_compat_dt[] __initconst = { diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index a3fd30242bd8..d322a162b4b0 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -19,12 +19,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clk.h> -#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/platform_data/rcar-du.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/rcar-gen2.h> @@ -82,49 +81,35 @@ static void __init koelsch_add_du_device(void) platform_device_register_full(&info); } -static void __init koelsch_add_standard_devices(void) -{ - /* - * This is a really crude hack to provide clkdev support to the CMT and - * DU devices until they get moved to DT. - */ - static const struct clk_name { - const char *clk; - const char *con_id; - const char *dev_id; - } clk_names[] = { - { "cmt0", NULL, "sh_cmt.0" }, - { "scifa0", NULL, "sh-sci.0" }, - { "scifa1", NULL, "sh-sci.1" }, - { "scifb0", NULL, "sh-sci.2" }, - { "scifb1", NULL, "sh-sci.3" }, - { "scifb2", NULL, "sh-sci.4" }, - { "scifa2", NULL, "sh-sci.5" }, - { "scif0", NULL, "sh-sci.6" }, - { "scif1", NULL, "sh-sci.7" }, - { "scif2", NULL, "sh-sci.8" }, - { "scif3", NULL, "sh-sci.9" }, - { "scif4", NULL, "sh-sci.10" }, - { "scif5", NULL, "sh-sci.11" }, - { "scifa3", NULL, "sh-sci.12" }, - { "scifa4", NULL, "sh-sci.13" }, - { "scifa5", NULL, "sh-sci.14" }, - { "du0", "du.0", "rcar-du-r8a7791" }, - { "du1", "du.1", "rcar-du-r8a7791" }, - { "lvds0", "lvds.0", "rcar-du-r8a7791" }, - }; - struct clk *clk; - unsigned int i; +/* + * This is a really crude hack to provide clkdev support to platform + * devices until they get moved to DT. + */ +static const struct clk_name clk_names[] __initconst = { + { "cmt0", "fck", "sh-cmt-48-gen2.0" }, + { "du0", "du.0", "rcar-du-r8a7791" }, + { "du1", "du.1", "rcar-du-r8a7791" }, + { "lvds0", "lvds.0", "rcar-du-r8a7791" }, +}; - for (i = 0; i < ARRAY_SIZE(clk_names); ++i) { - clk = clk_get(NULL, clk_names[i].clk); - if (!IS_ERR(clk)) { - clk_register_clkdev(clk, clk_names[i].con_id, - clk_names[i].dev_id); - clk_put(clk); - } - } +/* + * This is a really crude hack to work around core platform clock issues + */ +static const struct clk_name clk_enables[] __initconst = { + { "ether", NULL, "ee700000.ethernet" }, + { "i2c2", NULL, "e6530000.i2c" }, + { "msiof0", NULL, "e6e20000.spi" }, + { "qspi_mod", NULL, "e6b10000.spi" }, + { "sdhi0", NULL, "ee100000.sd" }, + { "sdhi1", NULL, "ee140000.sd" }, + { "sdhi2", NULL, "ee160000.sd" }, + { "thermal", NULL, "e61f0000.thermal" }, +}; +static void __init koelsch_add_standard_devices(void) +{ + shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); + shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true); r8a7791_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -139,7 +124,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = koelsch_add_standard_devices, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index 5a034ff405d0..c6c68892caa3 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -216,7 +216,7 @@ static const struct spi_board_info spi_info[] __initconst = { { .modalias = "m25p80", .platform_data = &spi_flash_data, - .mode = SPI_MODE_0, + .mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD, .max_speed_hz = 30000000, .bus_num = 0, .chip_select = 0, @@ -522,7 +522,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = koelsch_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 598e32488410..a735a1d80c28 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -36,8 +36,8 @@ static void __init kzm_init(void) sh73a0_add_standard_devices_dt(); #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); + /* Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif } diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 03dc3ac84502..f94ec8ca42c1 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -876,8 +876,8 @@ static void __init kzm_init(void) gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */ #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); + /* Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index 440aac36d693..749832e3f33c 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -18,12 +18,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clk.h> -#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/of_platform.h> #include <linux/platform_data/rcar-du.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/rcar-gen2.h> @@ -86,46 +85,36 @@ static void __init lager_add_du_device(void) platform_device_register_full(&info); } -static void __init lager_add_standard_devices(void) -{ - /* - * This is a really crude hack to provide clkdev support to platform - * devices until they get moved to DT. - */ - static const struct clk_name { - const char *clk; - const char *con_id; - const char *dev_id; - } clk_names[] = { - { "cmt0", NULL, "sh_cmt.0" }, - { "scifa0", NULL, "sh-sci.0" }, - { "scifa1", NULL, "sh-sci.1" }, - { "scifb0", NULL, "sh-sci.2" }, - { "scifb1", NULL, "sh-sci.3" }, - { "scifb2", NULL, "sh-sci.4" }, - { "scifa2", NULL, "sh-sci.5" }, - { "scif0", NULL, "sh-sci.6" }, - { "scif1", NULL, "sh-sci.7" }, - { "hscif0", NULL, "sh-sci.8" }, - { "hscif1", NULL, "sh-sci.9" }, - { "du0", "du.0", "rcar-du-r8a7790" }, - { "du1", "du.1", "rcar-du-r8a7790" }, - { "du2", "du.2", "rcar-du-r8a7790" }, - { "lvds0", "lvds.0", "rcar-du-r8a7790" }, - { "lvds1", "lvds.1", "rcar-du-r8a7790" }, - }; - struct clk *clk; - unsigned int i; +/* + * This is a really crude hack to provide clkdev support to platform + * devices until they get moved to DT. + */ +static const struct clk_name clk_names[] __initconst = { + { "cmt0", "fck", "sh-cmt-48-gen2.0" }, + { "du0", "du.0", "rcar-du-r8a7790" }, + { "du1", "du.1", "rcar-du-r8a7790" }, + { "du2", "du.2", "rcar-du-r8a7790" }, + { "lvds0", "lvds.0", "rcar-du-r8a7790" }, + { "lvds1", "lvds.1", "rcar-du-r8a7790" }, +}; - for (i = 0; i < ARRAY_SIZE(clk_names); ++i) { - clk = clk_get(NULL, clk_names[i].clk); - if (!IS_ERR(clk)) { - clk_register_clkdev(clk, clk_names[i].con_id, - clk_names[i].dev_id); - clk_put(clk); - } - } +/* + * This is a really crude hack to work around core platform clock issues + */ +static const struct clk_name clk_enables[] __initconst = { + { "ether", NULL, "ee700000.ethernet" }, + { "msiof1", NULL, "e6e10000.spi" }, + { "mmcif1", NULL, "ee220000.mmc" }, + { "qspi_mod", NULL, "e6b10000.spi" }, + { "sdhi0", NULL, "ee100000.sd" }, + { "sdhi2", NULL, "ee140000.sd" }, + { "thermal", NULL, "e61f0000.thermal" }, +}; +static void __init lager_add_standard_devices(void) +{ + shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); + shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true); r8a7790_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index 18c7e0311aa6..f8b1e05463cc 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -325,12 +325,12 @@ static const struct rspi_plat_data qspi_pdata __initconst = { static const struct spi_board_info spi_info[] __initconst = { { - .modalias = "m25p80", - .platform_data = &spi_flash_data, - .mode = SPI_MODE_0, - .max_speed_hz = 30000000, - .bus_num = 0, - .chip_select = 0, + .modalias = "m25p80", + .platform_data = &spi_flash_data, + .mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD, + .max_speed_hz = 30000000, + .bus_num = 0, + .chip_select = 0, }, }; @@ -567,20 +567,27 @@ static struct resource rsnd_resources[] __initdata = { }; static struct rsnd_ssi_platform_info rsnd_ssi[] = { - RSND_SSI_SET(0, 0, gic_spi(370), RSND_SSI_PLAY), - RSND_SSI_SET(0, 0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE), + RSND_SSI(0, gic_spi(370), 0), + RSND_SSI(0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE), }; -static struct rsnd_scu_platform_info rsnd_scu[2] = { +static struct rsnd_src_platform_info rsnd_src[2] = { /* no member at this point */ }; +static struct rsnd_dai_platform_info rsnd_dai = { + .playback = { .ssi = &rsnd_ssi[0], }, + .capture = { .ssi = &rsnd_ssi[1], }, +}; + static struct rcar_snd_info rsnd_info = { .flags = RSND_GEN2, .ssi_info = rsnd_ssi, .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), - .scu_info = rsnd_scu, - .scu_info_nr = ARRAY_SIZE(rsnd_scu), + .src_info = rsnd_src, + .src_info_nr = ARRAY_SIZE(rsnd_src), + .dai_info = &rsnd_dai, + .dai_info_nr = 1, }; static struct asoc_simple_card_info rsnd_card_info = { diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c deleted file mode 100644 index 5ac13ba71d54..000000000000 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Emma Mobile EV2 clock framework support - * - * Copyright (C) 2012 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include <mach/common.h> - -#define EMEV2_SMU_BASE 0xe0110000 - -/* EMEV2 SMU registers */ -#define USIAU0_RSTCTRL 0x094 -#define USIBU1_RSTCTRL 0x0ac -#define USIBU2_RSTCTRL 0x0b0 -#define USIBU3_RSTCTRL 0x0b4 -#define STI_RSTCTRL 0x124 -#define USIAU0GCLKCTRL 0x4a0 -#define USIBU1GCLKCTRL 0x4b8 -#define USIBU2GCLKCTRL 0x4bc -#define USIBU3GCLKCTRL 0x04c0 -#define STIGCLKCTRL 0x528 -#define USIAU0SCLKDIV 0x61c -#define USIB2SCLKDIV 0x65c -#define USIB3SCLKDIV 0x660 -#define STI_CLKSEL 0x688 - -/* not pretty, but hey */ -static void __iomem *smu_base; - -static void emev2_smu_write(unsigned long value, int offs) -{ - BUG_ON(!smu_base || (offs >= PAGE_SIZE)); - iowrite32(value, smu_base + offs); -} - -static struct clk_mapping smu_mapping = { - .phys = EMEV2_SMU_BASE, - .len = PAGE_SIZE, -}; - -/* Fixed 32 KHz root clock from C32K pin */ -static struct clk c32k_clk = { - .rate = 32768, - .mapping = &smu_mapping, -}; - -/* PLL3 multiplies C32K with 7000 */ -static unsigned long pll3_recalc(struct clk *clk) -{ - return clk->parent->rate * 7000; -} - -static struct sh_clk_ops pll3_clk_ops = { - .recalc = pll3_recalc, -}; - -static struct clk pll3_clk = { - .ops = &pll3_clk_ops, - .parent = &c32k_clk, -}; - -static struct clk *main_clks[] = { - &c32k_clk, - &pll3_clk, -}; - -enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3, - SCLKDIV_NR }; - -#define SCLKDIV(_reg, _shift) \ -{ \ - .parent = &pll3_clk, \ - .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ - .enable_bit = _shift, \ -} - -static struct clk sclkdiv_clks[SCLKDIV_NR] = { - [SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0), - [SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16), - [SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0), - [SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0), -}; - -enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK, - GCLK_STI_SCLK, - GCLK_NR }; - -#define GCLK_SCLK(_parent, _reg) \ -{ \ - .parent = _parent, \ - .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ - .enable_bit = 1, /* SCLK_GCC */ \ -} - -static struct clk gclk_clks[GCLK_NR] = { - [GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0], - USIAU0GCLKCTRL), - [GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1], - USIBU1GCLKCTRL), - [GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2], - USIBU2GCLKCTRL), - [GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3], - USIBU3GCLKCTRL), - [GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL), -}; - -static int emev2_gclk_enable(struct clk *clk) -{ - iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit), - clk->mapped_reg); - return 0; -} - -static void emev2_gclk_disable(struct clk *clk) -{ - iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit), - clk->mapped_reg); -} - -static struct sh_clk_ops emev2_gclk_clk_ops = { - .enable = emev2_gclk_enable, - .disable = emev2_gclk_disable, - .recalc = followparent_recalc, -}; - -static int __init emev2_gclk_register(struct clk *clks, int nr) -{ - struct clk *clkp; - int ret = 0; - int k; - - for (k = 0; !ret && (k < nr); k++) { - clkp = clks + k; - clkp->ops = &emev2_gclk_clk_ops; - ret |= clk_register(clkp); - } - - return ret; -} - -static unsigned long emev2_sclkdiv_recalc(struct clk *clk) -{ - unsigned int sclk_div; - - sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff; - - return clk->parent->rate / (sclk_div + 1); -} - -static struct sh_clk_ops emev2_sclkdiv_clk_ops = { - .recalc = emev2_sclkdiv_recalc, -}; - -static int __init emev2_sclkdiv_register(struct clk *clks, int nr) -{ - struct clk *clkp; - int ret = 0; - int k; - - for (k = 0; !ret && (k < nr); k++) { - clkp = clks + k; - clkp->ops = &emev2_sclkdiv_clk_ops; - ret |= clk_register(clkp); - } - - return ret; -} - -static struct clk_lookup lookups[] = { - CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]), - CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]), - CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]), - CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]), - CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]), - CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]), - CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]), - CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]), - CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]), - CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]), -}; - -void __init emev2_clock_init(void) -{ - int k, ret = 0; - - smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); - BUG_ON(!smu_base); - - /* setup STI timer to run on 32.768 kHz and deassert reset */ - emev2_smu_write(0, STI_CLKSEL); - emev2_smu_write(1, STI_RSTCTRL); - - /* deassert reset for UART0->UART3 */ - emev2_smu_write(2, USIAU0_RSTCTRL); - emev2_smu_write(2, USIBU1_RSTCTRL); - emev2_smu_write(2, USIBU2_RSTCTRL); - emev2_smu_write(2, USIBU3_RSTCTRL); - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR); - - if (!ret) - ret = emev2_gclk_register(gclk_clks, GCLK_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup emev2 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c index bee0073c9b64..df187484de5d 100644 --- a/arch/arm/mach-shmobile/clock-r7s72100.c +++ b/arch/arm/mach-shmobile/clock-r7s72100.c @@ -194,17 +194,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]), CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]), CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]), - CLKDEV_DEV_ID("e800c800.spi", &mstp_clks[MSTP107]), - CLKDEV_DEV_ID("e800d000.spi", &mstp_clks[MSTP106]), - CLKDEV_DEV_ID("e800d800.spi", &mstp_clks[MSTP105]), - CLKDEV_DEV_ID("e800e000.spi", &mstp_clks[MSTP104]), - CLKDEV_DEV_ID("e800e800.spi", &mstp_clks[MSTP103]), - CLKDEV_DEV_ID("fcfee000.i2c", &mstp_clks[MSTP97]), - CLKDEV_DEV_ID("fcfee400.i2c", &mstp_clks[MSTP96]), - CLKDEV_DEV_ID("fcfee800.i2c", &mstp_clks[MSTP95]), - CLKDEV_DEV_ID("fcfeec00.i2c", &mstp_clks[MSTP94]), CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]), - CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]), /* ICK */ CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]), @@ -215,6 +205,7 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]), CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]), CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]), + CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP33]), }; void __init r7s72100_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 7348d58f500e..b5bc22c6a858 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -597,7 +597,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]), CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]), CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]), - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), + CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.1", &mstp_clks[MSTP329]), CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]), CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]), CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]), diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index dd989f93498f..50931e3c97c7 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -548,15 +548,9 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), - CLKDEV_DEV_ID("sh_tmu.3", &mstp_clks[MSTP111]), - CLKDEV_DEV_ID("sh_tmu.4", &mstp_clks[MSTP111]), - CLKDEV_DEV_ID("sh_tmu.5", &mstp_clks[MSTP111]), CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), CLKDEV_DEV_ID("fff20000.i2c", &mstp_clks[MSTP116]), CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), - CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP125]), CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]), @@ -583,7 +577,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]), CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]), - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("fe1f0000.sound", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), @@ -596,7 +589,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]), - CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), + CLKDEV_DEV_ID("e9a00000.ethernet", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]), @@ -604,6 +597,9 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6870000.sd", &mstp_clks[MSTP415]), /* ICK */ + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP111]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), + CLKDEV_ICK_ID("fck", "sh-cmt-48.1", &mstp_clks[MSTP329]), CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]), CLKDEV_ICK_ID("func", "renesas_usbhs", &mstp_clks[MSTP407]), CLKDEV_ICK_ID("phy", "renesas_usbhs", &mstp_clks[MSTP406]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index 9989b1b06ffd..13f8f3ab8840 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -175,10 +175,6 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main */ - CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), - CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), - CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), - CLKDEV_CON_ID("audio_clk_internal", &s1_clk), CLKDEV_CON_ID("shyway_clk", &s_clk), CLKDEV_CON_ID("peripheral_clk", &p_clk), @@ -211,8 +207,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */ CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */ CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ @@ -234,15 +228,17 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), - CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP531]), - CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP530]), - CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP529]), - CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP528]), - CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP527]), - CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP526]), - CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP525]), - CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP524]), - CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP523]), + CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]), + CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]), + CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]), + CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]), + CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]), + CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]), + CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]), + CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]), + CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]), }; void __init r8a7778_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 8e403ae0c7b2..a13298bd37a8 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -173,9 +173,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */ CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */ - CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */ + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), /* TMU0 */ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */ CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 3f93503f5b96..296a057109e4 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -249,10 +249,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */ [MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */ [MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */ - [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ + [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ @@ -294,10 +294,6 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main clocks */ - CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), - CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), - CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), - CLKDEV_CON_ID("audio_clk_internal", &m2_clk), CLKDEV_CON_ID("extal", &extal_clk), CLKDEV_CON_ID("extal_div2", &extal_div2_clk), CLKDEV_CON_ID("main", &main_clk), @@ -361,7 +357,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), - CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]), CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]), CLKDEV_DEV_ID("pci-rcar-gen2.0", &mstp_clks[MSTP703]), @@ -371,6 +366,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]), /* ICK */ + CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]), CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]), CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]), CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]), @@ -381,16 +377,16 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b), CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c), CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk), - CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP1031]), - CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP1030]), - CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP1029]), - CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP1028]), - CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP1027]), - CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP1026]), - CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP1025]), - CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP1024]), - CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP1023]), - CLKDEV_ICK_ID("scu.9", "rcar_sound", &mstp_clks[MSTP1022]), + CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP1031]), + CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP1030]), + CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP1029]), + CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP1028]), + CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP1027]), + CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP1026]), + CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP1025]), + CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP1024]), + CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP1023]), + CLKDEV_ICK_ID("src.9", "rcar_sound", &mstp_clks[MSTP1022]), CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]), CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]), CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]), diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index 701383fe3267..e2fdfcc14436 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -25,6 +25,7 @@ #include <linux/clkdev.h> #include <mach/clock.h> #include <mach/common.h> +#include <mach/rcar-gen2.h> /* * MD EXTAL PLL0 PLL1 PLL3 @@ -43,8 +44,6 @@ * see "p1 / 2" on R8A7791_CLOCK_ROOT() below */ -#define MD(nr) (1 << nr) - #define CPG_BASE 0xe6150000 #define CPG_LEN 0x1000 @@ -68,7 +67,6 @@ #define MSTPSR9 IOMEM(0xe61509a4) #define MSTPSR11 IOMEM(0xe61509ac) -#define MODEMR 0xE6160060 #define SDCKCR 0xE6150074 #define SD1CKCR 0xE6150078 #define SD2CKCR 0xE615026c @@ -190,12 +188,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */ [MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */ [MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */ - [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ - [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */ - [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */ + [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ + [MSTP927] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */ + [MSTP925] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ @@ -266,7 +264,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), - CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), + CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]), CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]), @@ -295,14 +293,9 @@ static struct clk_lookup lookups[] = { void __init r8a7791_clock_init(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; + u32 mode = rcar_gen2_read_mode_pins(); int k, ret = 0; - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - switch (mode & (MD(14) | MD(13))) { case 0: R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 28489978b09c..d16d9ca7f79e 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -515,8 +515,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */ - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */ - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ @@ -565,10 +563,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ - CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */ - CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ - CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ /* ICK */ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), @@ -580,7 +575,11 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */ CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]), + CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.4", &mstp_clks[MSTP405]), /* CMT4 */ + CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.3", &mstp_clks[MSTP404]), /* CMT3 */ + CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.2", &mstp_clks[MSTP400]), /* CMT2 */ CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 23edf8360c27..0d9cd1fe0212 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -633,8 +633,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */ - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */ - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */ @@ -650,7 +648,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */ CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ @@ -683,6 +680,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), + CLKDEV_ICK_ID("fck", "sh-cmt-48.1", &mstp_clks[MSTP329]), /* CMT1 */ + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */ }; void __init sh73a0_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index ad7df629d995..e7232a0373b9 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -21,6 +21,32 @@ */ #include <linux/kernel.h> #include <linux/init.h> + +#ifdef CONFIG_COMMON_CLK +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <mach/clock.h> + +void __init shmobile_clk_workaround(const struct clk_name *clks, + int nr_clks, bool enable) +{ + const struct clk_name *clkn; + struct clk *clk; + unsigned int i; + + for (i = 0; i < nr_clks; ++i) { + clkn = clks + i; + clk = clk_get(NULL, clkn->clk); + if (!IS_ERR(clk)) { + clk_register_clkdev(clk, clkn->con_id, clkn->dev_id); + if (enable) + clk_prepare_enable(clk); + clk_put(clk); + } + } +} + +#else /* CONFIG_COMMON_CLK */ #include <linux/sh_clk.h> #include <linux/export.h> #include <mach/clock.h> @@ -58,3 +84,5 @@ void __clk_put(struct clk *clk) { } EXPORT_SYMBOL(__clk_put); + +#endif /* CONFIG_COMMON_CLK */ diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h index 03e56074928c..31b6417463e6 100644 --- a/arch/arm/mach-shmobile/include/mach/clock.h +++ b/arch/arm/mach-shmobile/include/mach/clock.h @@ -1,6 +1,22 @@ #ifndef CLOCK_H #define CLOCK_H +#ifdef CONFIG_COMMON_CLK +/* temporary clock configuration helper for platform devices */ + +struct clk_name { + const char *clk; + const char *con_id; + const char *dev_id; +}; + +void shmobile_clk_workaround(const struct clk_name *clks, int nr_clks, + bool enable); + +#else /* CONFIG_COMMON_CLK */ +/* legacy clock implementation */ + +struct clk; unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk); extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; @@ -36,4 +52,5 @@ do { \ (p)->div = d; \ } while (0) +#endif /* CONFIG_COMMON_CLK */ #endif diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index cb8e32deb2a3..f7a360edcc35 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -4,6 +4,7 @@ extern void shmobile_earlytimer_init(void); extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div); +extern void shmobile_init_delay(void); struct twd_local_timer; extern void shmobile_setup_console(void); extern void shmobile_boot_vector(void); diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h deleted file mode 100644 index fcb142a14e07..000000000000 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_EMEV2_H__ -#define __ASM_EMEV2_H__ - -extern void emev2_map_io(void); -extern void emev2_init_delay(void); -extern void emev2_clock_init(void); -extern struct smp_operations emev2_smp_ops; - -#endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index d07932f872b6..5e3c9ec06303 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -47,7 +47,6 @@ enum { }; extern void r8a7740_meram_workaround(void); -extern void r8a7740_init_delay(void); extern void r8a7740_init_irq_of(void); extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h index 200fa699f730..664274cc4b64 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h @@ -5,7 +5,6 @@ void r8a7791_add_standard_devices(void); void r8a7791_add_dt_devices(void); void r8a7791_clock_init(void); void r8a7791_pinmux_init(void); -void r8a7791_init_early(void); extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index 1fc05d9453d0..f710235aff2f 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -99,39 +99,7 @@ static int rmobile_pd_power_up(struct generic_pm_domain *genpd) static bool rmobile_pd_active_wakeup(struct device *dev) { - bool (*active_wakeup)(struct device *dev); - - active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; - return active_wakeup ? active_wakeup(dev) : true; -} - -static int rmobile_pd_stop_dev(struct device *dev) -{ - int (*stop)(struct device *dev); - - stop = dev_gpd_data(dev)->ops.stop; - if (stop) { - int ret = stop(dev); - if (ret) - return ret; - } - return pm_clk_suspend(dev); -} - -static int rmobile_pd_start_dev(struct device *dev) -{ - int (*start)(struct device *dev); - int ret; - - ret = pm_clk_resume(dev); - if (ret) - return ret; - - start = dev_gpd_data(dev)->ops.start; - if (start) - ret = start(dev); - - return ret; + return true; } static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) @@ -140,8 +108,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) struct dev_power_governor *gov = rmobile_pd->gov; pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); - genpd->dev_ops.stop = rmobile_pd_stop_dev; - genpd->dev_ops.start = rmobile_pd_start_dev; + genpd->dev_ops.stop = pm_clk_suspend; + genpd->dev_ops.start = pm_clk_resume; genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; genpd->dev_irq_safe = true; genpd->power_off = rmobile_pd_power_down; diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index c71d667007b8..d953ff6e78a2 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <mach/common.h> -#include <mach/emev2.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -38,23 +37,19 @@ static struct map_desc emev2_io_desc[] __initdata = { #endif }; -void __init emev2_map_io(void) +static void __init emev2_map_io(void) { iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); } -void __init emev2_init_delay(void) +static void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } static void __init emev2_add_standard_devices_dt(void) { -#ifdef CONFIG_COMMON_CLK of_clk_init(NULL); -#else - emev2_clock_init(); -#endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -63,6 +58,8 @@ static const char *emev2_boards_compat_dt[] __initconst = { NULL, }; +extern struct smp_operations emev2_smp_ops; + DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c index 9c0b3a9d5f7a..412e179429cd 100644 --- a/arch/arm/mach-shmobile/setup-r7s72100.c +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -21,77 +21,26 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/of_platform.h> -#include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r7s72100.h> #include <asm/mach/arch.h> -#define R7S72100_SCIF(index, baseaddr, irq) \ -static const struct plat_sci_port scif##index##_platform_data = { \ - .type = PORT_SCIF, \ - .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \ - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ - .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \ - SCSCR_REIE, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq + 1), \ - DEFINE_RES_IRQ(irq + 2), \ - DEFINE_RES_IRQ(irq + 3), \ - DEFINE_RES_IRQ(irq), \ -} \ - -R7S72100_SCIF(0, 0xe8007000, gic_iid(221)); -R7S72100_SCIF(1, 0xe8007800, gic_iid(225)); -R7S72100_SCIF(2, 0xe8008000, gic_iid(229)); -R7S72100_SCIF(3, 0xe8008800, gic_iid(233)); -R7S72100_SCIF(4, 0xe8009000, gic_iid(237)); -R7S72100_SCIF(5, 0xe8009800, gic_iid(241)); -R7S72100_SCIF(6, 0xe800a000, gic_iid(245)); -R7S72100_SCIF(7, 0xe800a800, gic_iid(249)); - -#define r7s72100_register_scif(index) \ - platform_device_register_resndata(&platform_bus, "sh-sci", index, \ - scif##index##_resources, \ - ARRAY_SIZE(scif##index##_resources), \ - &scif##index##_platform_data, \ - sizeof(scif##index##_platform_data)) - - -static struct sh_timer_config mtu2_0_platform_data __initdata = { - .name = "MTU2_0", - .timer_bit = 0, - .channel_offset = -0x80, - .clockevent_rating = 200, -}; - -static struct resource mtu2_0_resources[] __initdata = { - DEFINE_RES_MEM(0xfcff0300, 0x27), - DEFINE_RES_IRQ(gic_iid(139)), /* MTU2 TGI0A */ +static struct resource mtu2_resources[] __initdata = { + DEFINE_RES_MEM(0xfcff0000, 0x400), + DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"), }; -#define r7s72100_register_mtu2(idx) \ - platform_device_register_resndata(&platform_bus, "sh_mtu2", \ - idx, mtu2_##idx##_resources, \ - ARRAY_SIZE(mtu2_##idx##_resources), \ - &mtu2_##idx##_platform_data, \ - sizeof(struct sh_timer_config)) +#define r7s72100_register_mtu2() \ + platform_device_register_resndata(&platform_bus, "sh-mtu2", \ + -1, mtu2_resources, \ + ARRAY_SIZE(mtu2_resources), \ + NULL, 0) void __init r7s72100_add_dt_devices(void) { - r7s72100_register_scif(0); - r7s72100_register_scif(1); - r7s72100_register_scif(2); - r7s72100_register_scif(3); - r7s72100_register_scif(4); - r7s72100_register_scif(5); - r7s72100_register_scif(6); - r7s72100_register_scif(7); - r7s72100_register_mtu2(0); + r7s72100_register_mtu2(); } void __init r7s72100_init_early(void) diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index cd36f8078325..9333770cfac2 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -169,20 +169,17 @@ static const struct resource thermal0_resources[] = { thermal0_resources, \ ARRAY_SIZE(thermal0_resources)) -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .timer_bit = 0, - .clockevent_rating = 80, +static struct sh_timer_config cmt1_platform_data = { + .channels_mask = 0xff, }; -static struct resource cmt10_resources[] = { - DEFINE_RES_MEM(0xe6130010, 0x0c), - DEFINE_RES_MEM(0xe6130000, 0x04), - DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */ +static struct resource cmt1_resources[] = { + DEFINE_RES_MEM(0xe6130000, 0x1004), + DEFINE_RES_IRQ(gic_spi(120)), }; #define r8a7790_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh_cmt", \ + platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -196,7 +193,7 @@ void __init r8a73a4_add_dt_devices(void) r8a73a4_register_scif(3); r8a73a4_register_scif(4); r8a73a4_register_scif(5); - r8a7790_register_cmt(10); + r8a7790_register_cmt(1); } /* DMA */ diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 8f3c68101d59..35dec233301e 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -237,126 +237,45 @@ R8A7740_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(107)); R8A7740_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(108)); /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, +static struct sh_timer_config cmt1_platform_data = { + .channels_mask = 0x3f, }; -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(58), - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt1_resources[] = { + DEFINE_RES_MEM(0xe6138000, 0x170), + DEFINE_RES_IRQ(gic_spi(58)), }; -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, +static struct platform_device cmt1_device = { + .name = "sh-cmt-48", + .id = 1, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt1_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt1_resources, + .num_resources = ARRAY_SIZE(cmt1_resources), }; /* TMU */ -static struct sh_timer_config tmu00_platform_data = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource tmu00_resources[] = { - [0] = { - .name = "TMU00", - .start = 0xfff80008, - .end = 0xfff80014 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(198), - .flags = IORESOURCE_IRQ, - }, +static struct resource tmu0_resources[] = { + DEFINE_RES_MEM(0xfff80000, 0x2c), + DEFINE_RES_IRQ(gic_spi(198)), + DEFINE_RES_IRQ(gic_spi(199)), + DEFINE_RES_IRQ(gic_spi(200)), }; -static struct platform_device tmu00_device = { - .name = "sh_tmu", +static struct platform_device tmu0_device = { + .name = "sh-tmu", .id = 0, .dev = { - .platform_data = &tmu00_platform_data, - }, - .resource = tmu00_resources, - .num_resources = ARRAY_SIZE(tmu00_resources), -}; - -static struct sh_timer_config tmu01_platform_data = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu01_resources[] = { - [0] = { - .name = "TMU01", - .start = 0xfff80014, - .end = 0xfff80020 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(199), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu01_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu01_platform_data, + .platform_data = &tmu0_platform_data, }, - .resource = tmu01_resources, - .num_resources = ARRAY_SIZE(tmu01_resources), -}; - -static struct sh_timer_config tmu02_platform_data = { - .name = "TMU02", - .channel_offset = 0x1C, - .timer_bit = 2, - .clocksource_rating = 200, -}; - -static struct resource tmu02_resources[] = { - [0] = { - .name = "TMU02", - .start = 0xfff80020, - .end = 0xfff8002C - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(200), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu02_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu02_platform_data, - }, - .resource = tmu02_resources, - .num_resources = ARRAY_SIZE(tmu02_resources), + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), }; /* IPMMUI (an IPMMU module for ICB/LMB) */ @@ -400,7 +319,7 @@ static struct platform_device *r8a7740_devices_dt[] __initdata = { &scif6_device, &scif7_device, &scif8_device, - &cmt10_device, + &cmt1_device, }; static struct platform_device *r8a7740_early_devices[] __initdata = { @@ -408,9 +327,7 @@ static struct platform_device *r8a7740_early_devices[] __initdata = { &irqpin1_device, &irqpin2_device, &irqpin3_device, - &tmu00_device, - &tmu01_device, - &tmu02_device, + &tmu0_device, &ipmmu_device, }; @@ -765,7 +682,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = { * "Media RAM (MERAM)" on r8a7740 documentation */ #define MEBUFCNTR 0xFE950098 -void r8a7740_meram_workaround(void) +void __init r8a7740_meram_workaround(void) { void __iomem *reg; @@ -869,17 +786,6 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -void __init r8a7740_add_early_devices_dt(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ - - early_platform_add_devices(r8a7740_early_devices, - ARRAY_SIZE(r8a7740_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - void __init r8a7740_add_standard_devices_dt(void) { platform_add_devices(r8a7740_devices_dt, @@ -887,11 +793,6 @@ void __init r8a7740_add_standard_devices_dt(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -void __init r8a7740_init_delay(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ -}; - void __init r8a7740_init_irq_of(void) { void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10); @@ -935,9 +836,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, - .init_early = r8a7740_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = r8a7740_generic_init, + .init_late = shmobile_init_late, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 6d694526e4ca..d311ef903b39 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -71,33 +71,20 @@ R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b)); sizeof(scif##index##_platform_data)) /* TMU */ -static struct resource sh_tmu0_resources[] __initdata = { - DEFINE_RES_MEM(0xffd80008, 12), - DEFINE_RES_IRQ(gic_iid(0x40)), -}; - -static struct sh_timer_config sh_tmu0_platform_data __initdata = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config sh_tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource sh_tmu1_resources[] __initdata = { - DEFINE_RES_MEM(0xffd80014, 12), +static struct resource sh_tmu0_resources[] = { + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(gic_iid(0x40)), DEFINE_RES_IRQ(gic_iid(0x41)), -}; - -static struct sh_timer_config sh_tmu1_platform_data __initdata = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + DEFINE_RES_IRQ(gic_iid(0x42)), }; #define r8a7778_register_tmu(idx) \ platform_device_register_resndata( \ - &platform_bus, "sh_tmu", idx, \ + &platform_bus, "sh-tmu", idx, \ sh_tmu##idx##_resources, \ ARRAY_SIZE(sh_tmu##idx##_resources), \ &sh_tmu##idx##_platform_data, \ @@ -298,10 +285,10 @@ void __init r8a7778_add_dt_devices(void) void __iomem *base = ioremap_nocache(0xf0100000, 0x1000); if (base) { /* - * Early BRESP enable, Shared attribute override enable, 64K*16way + * Shared attribute override enable, 64K*16way * don't call iounmap(base) */ - l2x0_init(base, 0x40470000, 0x82000fff); + l2x0_init(base, 0x00400000, 0xc20f0fff); } #endif @@ -312,7 +299,6 @@ void __init r8a7778_add_dt_devices(void) r8a7778_register_scif(4); r8a7778_register_scif(5); r8a7778_register_tmu(0); - r8a7778_register_tmu(1); } /* HPB-DMA */ diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 8e860b36997a..aba4ed652d54 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -219,64 +219,25 @@ R8A7779_SCIF(4, 0xffe44000, gic_iid(0x7c)); R8A7779_SCIF(5, 0xffe45000, gic_iid(0x7d)); /* TMU */ -static struct sh_timer_config tmu00_platform_data = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource tmu00_resources[] = { - [0] = { - .name = "TMU00", - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x40), - .flags = IORESOURCE_IRQ, - }, +static struct resource tmu0_resources[] = { + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(gic_iid(0x40)), + DEFINE_RES_IRQ(gic_iid(0x41)), + DEFINE_RES_IRQ(gic_iid(0x42)), }; -static struct platform_device tmu00_device = { - .name = "sh_tmu", +static struct platform_device tmu0_device = { + .name = "sh-tmu", .id = 0, .dev = { - .platform_data = &tmu00_platform_data, - }, - .resource = tmu00_resources, - .num_resources = ARRAY_SIZE(tmu00_resources), -}; - -static struct sh_timer_config tmu01_platform_data = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu01_resources[] = { - [0] = { - .name = "TMU01", - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x41), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu01_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu01_platform_data, + .platform_data = &tmu0_platform_data, }, - .resource = tmu01_resources, - .num_resources = ARRAY_SIZE(tmu01_resources), + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), }; /* I2C */ @@ -685,8 +646,7 @@ static struct platform_device *r8a7779_devices_dt[] __initdata = { &scif3_device, &scif4_device, &scif5_device, - &tmu00_device, - &tmu01_device, + &tmu0_device, }; static struct platform_device *r8a7779_standard_devices[] __initdata = { @@ -700,8 +660,8 @@ static struct platform_device *r8a7779_standard_devices[] __initdata = { void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); + /* Shared attribute override enable, 64K*16way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif r8a7779_pm_init(); diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index c4616f0698c6..6bd08b127fa4 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -185,12 +185,6 @@ void __init r8a7790_pinmux_init(void) r8a7790_register_gpio(3); r8a7790_register_gpio(4); r8a7790_register_gpio(5); - r8a7790_register_i2c(0); - r8a7790_register_i2c(1); - r8a7790_register_i2c(2); - r8a7790_register_i2c(3); - r8a7790_register_audio_dmac(0); - r8a7790_register_audio_dmac(1); } #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \ @@ -269,20 +263,17 @@ static const struct resource thermal_resources[] __initconst = { thermal_resources, \ ARRAY_SIZE(thermal_resources)) -static const struct sh_timer_config cmt00_platform_data __initconst = { - .name = "CMT00", - .timer_bit = 0, - .clockevent_rating = 80, +static struct sh_timer_config cmt0_platform_data = { + .channels_mask = 0x60, }; -static const struct resource cmt00_resources[] __initconst = { - DEFINE_RES_MEM(0xffca0510, 0x0c), - DEFINE_RES_MEM(0xffca0500, 0x04), - DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +static struct resource cmt0_resources[] = { + DEFINE_RES_MEM(0xffca0000, 0x1004), + DEFINE_RES_IRQ(gic_spi(142)), }; #define r8a7790_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh_cmt", \ + platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -290,6 +281,11 @@ static const struct resource cmt00_resources[] __initconst = { void __init r8a7790_add_dt_devices(void) { + r8a7790_register_cmt(0); +} + +void __init r8a7790_add_standard_devices(void) +{ r8a7790_register_scif(0); r8a7790_register_scif(1); r8a7790_register_scif(2); @@ -300,14 +296,15 @@ void __init r8a7790_add_dt_devices(void) r8a7790_register_scif(7); r8a7790_register_scif(8); r8a7790_register_scif(9); - r8a7790_register_cmt(00); -} - -void __init r8a7790_add_standard_devices(void) -{ r8a7790_add_dt_devices(); r8a7790_register_irqc(0); r8a7790_register_thermal(); + r8a7790_register_i2c(0); + r8a7790_register_i2c(1); + r8a7790_register_i2c(2); + r8a7790_register_i2c(3); + r8a7790_register_audio_dmac(0); + r8a7790_register_audio_dmac(1); } void __init r8a7790_init_early(void) diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index e28404e43860..04a96ddb3224 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -128,20 +128,17 @@ R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */ &scif##index##_platform_data, \ sizeof(scif##index##_platform_data)) -static const struct sh_timer_config cmt00_platform_data __initconst = { - .name = "CMT00", - .timer_bit = 0, - .clockevent_rating = 80, +static struct sh_timer_config cmt0_platform_data = { + .channels_mask = 0x60, }; -static const struct resource cmt00_resources[] __initconst = { - DEFINE_RES_MEM(0xffca0510, 0x0c), - DEFINE_RES_MEM(0xffca0500, 0x04), - DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +static struct resource cmt0_resources[] = { + DEFINE_RES_MEM(0xffca0000, 0x1004), + DEFINE_RES_IRQ(gic_spi(142)), }; #define r8a7791_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh_cmt", \ + platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -185,6 +182,11 @@ static const struct resource thermal_resources[] __initconst = { void __init r8a7791_add_dt_devices(void) { + r8a7791_register_cmt(0); +} + +void __init r8a7791_add_standard_devices(void) +{ r8a7791_register_scif(0); r8a7791_register_scif(1); r8a7791_register_scif(2); @@ -200,23 +202,11 @@ void __init r8a7791_add_dt_devices(void) r8a7791_register_scif(12); r8a7791_register_scif(13); r8a7791_register_scif(14); - r8a7791_register_cmt(00); -} - -void __init r8a7791_add_standard_devices(void) -{ r8a7791_add_dt_devices(); r8a7791_register_irqc(0); r8a7791_register_thermal(); } -void __init r8a7791_init_early(void) -{ -#ifndef CONFIG_ARM_ARCH_TIMER - shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ -#endif -} - #ifdef CONFIG_USE_OF static const char *r8a7791_boards_compat_dt[] __initdata = { "renesas,r8a7791", @@ -225,7 +215,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .dt_compat = r8a7791_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 10604480f325..542c5a47173f 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -30,12 +30,16 @@ u32 rcar_gen2_read_mode_pins(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - u32 mode; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); + static u32 mode; + static bool mode_valid; + + if (!mode_valid) { + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + mode_valid = true; + } return mode; } diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 27301278c208..2a8b9f2a2f54 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -119,28 +119,16 @@ SH7372_SCIF(PORT_SCIFB, 6, 0xe6c30000, evt2irq(0x0d60)); /* CMT */ static struct sh_timer_config cmt2_platform_data = { - .name = "CMT2", - .channel_offset = 0x40, - .timer_bit = 5, - .clockevent_rating = 125, - .clocksource_rating = 125, + .channels_mask = 0x20, }; static struct resource cmt2_resources[] = { - [0] = { - .name = "CMT2", - .start = 0xe6130040, - .end = 0xe613004b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0b80), /* CMT2 */ - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xe6130000, 0x50), + DEFINE_RES_IRQ(evt2irq(0x0b80)), }; static struct platform_device cmt2_device = { - .name = "sh_cmt", + .name = "sh-cmt-32-fast", .id = 2, .dev = { .platform_data = &cmt2_platform_data, @@ -150,64 +138,25 @@ static struct platform_device cmt2_device = { }; /* TMU */ -static struct sh_timer_config tmu00_platform_data = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource tmu00_resources[] = { - [0] = { - .name = "TMU00", - .start = 0xfff60008, - .end = 0xfff60013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0xe80), /* TMU_TUNI0 */ - .flags = IORESOURCE_IRQ, - }, +static struct resource tmu0_resources[] = { + DEFINE_RES_MEM(0xfff60000, 0x2c), + DEFINE_RES_IRQ(intcs_evt2irq(0xe80)), + DEFINE_RES_IRQ(intcs_evt2irq(0xea0)), + DEFINE_RES_IRQ(intcs_evt2irq(0xec0)), }; -static struct platform_device tmu00_device = { - .name = "sh_tmu", +static struct platform_device tmu0_device = { + .name = "sh-tmu", .id = 0, .dev = { - .platform_data = &tmu00_platform_data, - }, - .resource = tmu00_resources, - .num_resources = ARRAY_SIZE(tmu00_resources), -}; - -static struct sh_timer_config tmu01_platform_data = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu01_resources[] = { - [0] = { - .name = "TMU01", - .start = 0xfff60014, - .end = 0xfff6001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0xea0), /* TMU_TUNI1 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu01_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu01_platform_data, + .platform_data = &tmu0_platform_data, }, - .resource = tmu01_resources, - .num_resources = ARRAY_SIZE(tmu01_resources), + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), }; /* I2C */ @@ -952,8 +901,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif5_device, &scif6_device, &cmt2_device, - &tmu00_device, - &tmu01_device, + &tmu0_device, &ipmmu_device, }; @@ -1000,8 +948,7 @@ void __init sh7372_add_standard_devices(void) { "A4R", &veu2_device, }, { "A4R", &veu3_device, }, { "A4R", &jpu_device, }, - { "A4R", &tmu00_device, }, - { "A4R", &tmu01_device, }, + { "A4R", &tmu0_device, }, }; sh7372_init_pm_domains(); @@ -1037,11 +984,7 @@ void __init sh7372_add_early_devices_dt(void) { shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */ - early_platform_add_devices(sh7372_early_devices, - ARRAY_SIZE(sh7372_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); + sh7372_add_early_devices(); } void __init sh7372_add_standard_devices_dt(void) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index f74ab530c71d..ad00724a2269 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -104,86 +104,45 @@ SH73A0_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(156)); SH73A0_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(143)); SH73A0_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(80)); -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 80, - .clocksource_rating = 125, +static struct sh_timer_config cmt1_platform_data = { + .channels_mask = 0x3f, }; -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(65), - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt1_resources[] = { + DEFINE_RES_MEM(0xe6138000, 0x200), + DEFINE_RES_IRQ(gic_spi(65)), }; -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, +static struct platform_device cmt1_device = { + .name = "sh-cmt-48", + .id = 1, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt1_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt1_resources, + .num_resources = ARRAY_SIZE(cmt1_resources), }; /* TMU */ -static struct sh_timer_config tmu00_platform_data = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource tmu00_resources[] = { - [0] = DEFINE_RES_MEM(0xfff60008, 0xc), - [1] = { - .start = intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */ - .flags = IORESOURCE_IRQ, - }, +static struct resource tmu0_resources[] = { + DEFINE_RES_MEM(0xfff60000, 0x2c), + DEFINE_RES_IRQ(intcs_evt2irq(0xe80)), + DEFINE_RES_IRQ(intcs_evt2irq(0xea0)), + DEFINE_RES_IRQ(intcs_evt2irq(0xec0)), }; -static struct platform_device tmu00_device = { - .name = "sh_tmu", +static struct platform_device tmu0_device = { + .name = "sh-tmu", .id = 0, .dev = { - .platform_data = &tmu00_platform_data, - }, - .resource = tmu00_resources, - .num_resources = ARRAY_SIZE(tmu00_resources), -}; - -static struct sh_timer_config tmu01_platform_data = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu01_resources[] = { - [0] = DEFINE_RES_MEM(0xfff60014, 0xc), - [1] = { - .start = intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu01_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu01_platform_data, + .platform_data = &tmu0_platform_data, }, - .resource = tmu01_resources, - .num_resources = ARRAY_SIZE(tmu01_resources), + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), }; static struct resource i2c0_resources[] = { @@ -746,12 +705,11 @@ static struct platform_device *sh73a0_devices_dt[] __initdata = { &scif6_device, &scif7_device, &scif8_device, - &cmt10_device, + &cmt1_device, }; static struct platform_device *sh73a0_early_devices[] __initdata = { - &tmu00_device, - &tmu01_device, + &tmu0_device, &ipmmu_device, }; diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f2ca92308f75..2dfd748da7f3 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -24,7 +24,6 @@ #include <linux/io.h> #include <linux/delay.h> #include <mach/common.h> -#include <mach/emev2.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 2df5bd190fe4..ec979529f30f 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -20,6 +20,7 @@ #include <asm/smp_plat.h> #include <mach/common.h> #include <mach/r8a7791.h> +#include <mach/rcar-gen2.h> #define RST 0xe6160000 #define CA15BAR 0x0020 @@ -51,9 +52,21 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) iounmap(p); } +static int r8a7791_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + /* Error out when hardware debug mode is enabled */ + if (rcar_gen2_read_mode_pins() & BIT(21)) { + pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); + return -ENOTSUPP; + } + + return shmobile_smp_apmu_boot_secondary(cpu, idle); +} + struct smp_operations r8a7791_smp_ops __initdata = { .smp_prepare_cpus = r8a7791_smp_prepare_cpus, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, + .smp_boot_secondary = r8a7791_smp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_disable = shmobile_smp_cpu_disable, .cpu_die = shmobile_smp_apmu_cpu_die, diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 62d7052d6f21..68bc0b82226d 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -21,6 +21,24 @@ #include <linux/platform_device.h> #include <linux/clocksource.h> #include <linux/delay.h> +#include <linux/of_address.h> + +void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, + unsigned int mult, unsigned int div) +{ + /* calculate a worst-case loops-per-jiffy value + * based on maximum cpu core hz setting and the + * __delay() implementation in arch/arm/lib/delay.S + * + * this will result in a longer delay than expected + * when the cpu core runs on lower frequencies. + */ + + unsigned int value = HZ * div / mult; + + if (!preset_lpj) + preset_lpj = max_cpu_core_hz / value; +} void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div) @@ -39,6 +57,33 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, preset_lpj = max_cpu_core_mhz * value; } +void __init shmobile_init_delay(void) +{ + struct device_node *np, *parent; + u32 max_freq, freq; + + max_freq = 0; + + parent = of_find_node_by_path("/cpus"); + if (parent) { + for_each_child_of_node(parent, np) { + if (!of_property_read_u32(np, "clock-frequency", &freq)) + max_freq = max(max_freq, freq); + } + of_node_put(parent); + } + + if (max_freq) { + if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8")) + shmobile_setup_delay_hz(max_freq, 1, 3); + else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) + shmobile_setup_delay_hz(max_freq, 1, 3); + else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15")) + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + shmobile_setup_delay_hz(max_freq, 2, 4); + } +} + static void __init shmobile_late_time_init(void) { /* diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index d86231e11b34..adbf38314ca8 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -98,22 +98,17 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); } -static void __init socfpga_cyclone5_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *altera_dt_match[] = { "altr,socfpga", NULL }; DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(socfpga_smp_ops), .map_io = socfpga_map_io, .init_irq = socfpga_init_irq, - .init_machine = socfpga_cyclone5_init, .restart = socfpga_cyclone5_restart, .dt_compat = altera_dt_match, MACHINE_END diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index c19751fff2c6..fd4297713d67 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -20,6 +20,18 @@ #include <mach/spear.h> #include "generic.h" +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + sync_cache_w(&pen_release); +} + static DEFINE_SPINLOCK(boot_lock); static void __iomem *scu_base = IOMEM(VA_SCU_BASE); @@ -30,8 +42,7 @@ static void spear13xx_secondary_init(unsigned int cpu) * let the primary processor know we're out of the * pen, then head off into the C entry point */ - pen_release = -1; - smp_wmb(); + write_pen_release(-1); /* * Synchronise with the boot thread. @@ -58,9 +69,7 @@ static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) * Note that "pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - pen_release = cpu; - flush_cache_all(); - outer_flush_all(); + write_pen_release(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 7aa6e8cf830f..c9897ea38980 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -38,15 +38,15 @@ void __init spear13xx_l2x0_init(void) if (!IS_ENABLED(CONFIG_CACHE_L2X0)) return; - writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL); + writel_relaxed(0x06, VA_L2CC_BASE + L310_PREFETCH_CTRL); /* * Program following latencies in order to make * SPEAr1340 work at 600 MHz */ - writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL); - l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff); + writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL); + writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL); + l2x0_init(VA_L2CC_BASE, 0x30a00001, 0xfe0fffff); } /* diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index 1217fb598cfd..3cf6ef8d4317 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -14,33 +14,19 @@ #include "smp.h" -void __init stih41x_l2x0_init(void) -{ - u32 way_size = 0x4; - u32 aux_ctrl; - /* may be this can be encoded in macros like BIT*() */ - aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) | - (0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) | - (0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) | - (way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); - - l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); -} - -static void __init stih41x_machine_init(void) -{ - stih41x_l2x0_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", + "st,stih407", NULL }; DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree") - .init_machine = stih41x_machine_init, - .smp = smp_ops(sti_smp_ops), .dt_compat = stih41x_dt_match, + .l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH | + L2C_AUX_CTRL_WAY_SIZE(4), + .l2c_aux_mask = 0xc0000fff, + .smp = smp_ops(sti_smp_ops), MACHINE_END diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index b57d7d53b9d3..0fbd4f156bfa 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,14 +1,38 @@ -config ARCH_SUNXI - bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 - select ARCH_HAS_RESET_CONTROLLER +menuconfig ARCH_SUNXI + bool "Allwinner SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB - select ARM_GIC - select ARM_PSCI select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select HAVE_ARM_ARCH_TIMER select PINCTRL select PINCTRL_SUNXI - select RESET_CONTROLLER select SUN4I_TIMER + +if ARCH_SUNXI + +config MACH_SUN4I + bool "Allwinner A10 (sun4i) SoCs support" + default ARCH_SUNXI + +config MACH_SUN5I + bool "Allwinner A10s / A13 (sun5i) SoCs support" + default ARCH_SUNXI + select SUN5I_HSTIMER + +config MACH_SUN6I + bool "Allwinner A31 (sun6i) SoCs support" + default ARCH_SUNXI + select ARCH_HAS_RESET_CONTROLLER + select ARM_GIC + select MFD_SUN6I_PRCM + select RESET_CONTROLLER + select SUN5I_HSTIMER + +config MACH_SUN7I + bool "Allwinner A20 (sun7i) SoCs support" + default ARCH_SUNXI + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER select SUN5I_HSTIMER + +endif diff --git a/arch/arm/mach-sunxi/common.h b/arch/arm/mach-sunxi/common.h deleted file mode 100644 index 9e5ac4756cbb..000000000000 --- a/arch/arm/mach-sunxi/common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Core functions for Allwinner SoCs - * - * Copyright (C) 2013 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_SUNXI_COMMON_H_ -#define __ARCH_SUNXI_COMMON_H_ - -void sun6i_secondary_startup(void); -extern struct smp_operations sun6i_smp_ops; - -#endif /* __ARCH_SUNXI_COMMON_H_ */ diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 0c7dbce033cc..c53077bb8c3f 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -21,8 +21,6 @@ #include <linux/of_address.h> #include <linux/smp.h> -#include "common.h" - #define CPUCFG_CPU_PWR_CLAMP_STATUS_REG(cpu) ((cpu) * 0x40 + 0x64) #define CPUCFG_CPU_RST_CTRL_REG(cpu) (((cpu) + 1) * 0x40) #define CPUCFG_CPU_CTRL_REG(cpu) (((cpu) + 1) * 0x40 + 0x04) @@ -122,3 +120,4 @@ struct smp_operations sun6i_smp_ops __initdata = { .smp_prepare_cpus = sun6i_smp_prepare_cpus, .smp_boot_secondary = sun6i_smp_boot_secondary, }; +CPU_METHOD_OF_DECLARE(sun6i_smp, "allwinner,sun6i-a31", &sun6i_smp_ops); diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 460b5a4962ef..3f9587bb51f6 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -12,111 +12,8 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/io.h> -#include <linux/reboot.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/system_misc.h> - -#include "common.h" - -#define SUN4I_WATCHDOG_CTRL_REG 0x00 -#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) -#define SUN4I_WATCHDOG_MODE_REG 0x04 -#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0) -#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1) - -#define SUN6I_WATCHDOG1_IRQ_REG 0x00 -#define SUN6I_WATCHDOG1_CTRL_REG 0x10 -#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 -#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) -#define SUN6I_WATCHDOG1_MODE_REG 0x18 -#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) - -static void __iomem *wdt_base; - -static void sun4i_restart(enum reboot_mode mode, const char *cmd) -{ - if (!wdt_base) - return; - - /* Enable timer and set reset bit in the watchdog */ - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - - /* - * Restart the watchdog. The default (and lowest) interval - * value for the watchdog is 0.5s. - */ - writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); - - while (1) { - mdelay(5); - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - } -} - -static void sun6i_restart(enum reboot_mode mode, const char *cmd) -{ - if (!wdt_base) - return; - - /* Disable interrupts */ - writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG); - - /* We want to disable the IRQ and just reset the whole system */ - writel(SUN6I_WATCHDOG1_CONFIG_RESTART, - wdt_base + SUN6I_WATCHDOG1_CONFIG_REG); - - /* Enable timer. The default and lowest interval value is 0.5s */ - writel(SUN6I_WATCHDOG1_MODE_ENABLE, - wdt_base + SUN6I_WATCHDOG1_MODE_REG); - - /* Restart the watchdog. */ - writel(SUN6I_WATCHDOG1_CTRL_RESTART, - wdt_base + SUN6I_WATCHDOG1_CTRL_REG); - - while (1) { - mdelay(5); - writel(SUN6I_WATCHDOG1_MODE_ENABLE, - wdt_base + SUN6I_WATCHDOG1_MODE_REG); - } -} - -static struct of_device_id sunxi_restart_ids[] = { - { .compatible = "allwinner,sun4i-a10-wdt" }, - { .compatible = "allwinner,sun6i-a31-wdt" }, - { /*sentinel*/ } -}; - -static void sunxi_setup_restart(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, sunxi_restart_ids); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_base = of_iomap(np, 0); - WARN(!wdt_base, "failed to map watchdog base address"); -} - -static void __init sunxi_dt_init(void) -{ - sunxi_setup_restart(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", @@ -126,9 +23,7 @@ static const char * const sunxi_board_dt_compat[] = { }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") - .init_machine = sunxi_dt_init, .dt_compat = sunxi_board_dt_compat, - .restart = sun4i_restart, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -140,16 +35,14 @@ extern void __init sun6i_reset_init(void); static void __init sun6i_timer_init(void) { of_clk_init(NULL); - sun6i_reset_init(); + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + sun6i_reset_init(); clocksource_of_init(); } DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") - .init_machine = sunxi_dt_init, .init_time = sun6i_timer_init, .dt_compat = sun6i_board_dt_compat, - .restart = sun6i_restart, - .smp = smp_ops(sun6i_smp_ops), MACHINE_END static const char * const sun7i_board_dt_compat[] = { @@ -158,7 +51,5 @@ static const char * const sun7i_board_dt_compat[] = { }; DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") - .init_machine = sunxi_dt_init, .dt_compat = sun7i_board_dt_compat, - .restart = sun4i_restart, MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 55b305d51669..e16999e5b735 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -7,7 +7,6 @@ config ARCH_TEGRA select CLKSRC_MMIO select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select MIGHT_HAVE_PCI select PINCTRL select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index e4dec9fcb084..9c6029ba526f 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -23,9 +23,7 @@ #include "board.h" static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = { - .name = "wifi_rfkill", - .reset_gpio = 25, /* PD1 */ - .shutdown_gpio = 85, /* PK5 */ + .name = "wifi_rfkill", .type = RFKILL_TYPE_WLAN, }; diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 6e92a7c2ecbd..f4a89698e5b0 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -35,8 +35,6 @@ void tegra20_sleep_core_init(void); void tegra30_lp1_iram_hook(void); void tegra30_sleep_core_init(void); -extern unsigned long l2x0_saved_regs_addr; - void tegra_clear_cpu_in_lp2(void); bool tegra_set_cpu_in_lp2(void); diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index fb7920201ab4..7c7123e7557b 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -41,6 +41,14 @@ #define PMC_REMOVE_CLAMPING 0x34 #define PMC_PWRGATE_STATUS 0x38 +#define PMC_SCRATCH0 0x50 +#define PMC_SCRATCH0_MODE_RECOVERY (1 << 31) +#define PMC_SCRATCH0_MODE_BOOTLOADER (1 << 30) +#define PMC_SCRATCH0_MODE_RCM (1 << 1) +#define PMC_SCRATCH0_MODE_MASK (PMC_SCRATCH0_MODE_RECOVERY | \ + PMC_SCRATCH0_MODE_BOOTLOADER | \ + PMC_SCRATCH0_MODE_RCM) + #define PMC_CPUPWRGOOD_TIMER 0xc8 #define PMC_CPUPWROFF_TIMER 0xcc @@ -165,6 +173,22 @@ void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) { u32 val; + val = tegra_pmc_readl(PMC_SCRATCH0); + val &= ~PMC_SCRATCH0_MODE_MASK; + + if (cmd) { + if (strcmp(cmd, "recovery") == 0) + val |= PMC_SCRATCH0_MODE_RECOVERY; + + if (strcmp(cmd, "bootloader") == 0) + val |= PMC_SCRATCH0_MODE_BOOTLOADER; + + if (strcmp(cmd, "forced-recovery") == 0) + val |= PMC_SCRATCH0_MODE_RCM; + } + + tegra_pmc_writel(val, PMC_SCRATCH0); + val = tegra_pmc_readl(0); val |= 0x10; tegra_pmc_writel(val, 0); diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 8c1ba4fea384..578d4d1ad648 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -19,7 +19,6 @@ #include <asm/cache.h> #include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> #include "flowctrl.h" #include "fuse.h" @@ -78,8 +77,10 @@ ENTRY(tegra_resume) str r1, [r0] #endif +#ifdef CONFIG_CACHE_L2X0 /* L2 cache resume & re-enable */ - l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr + bl l2c310_early_resume +#endif end_ca9_scu_l2_resume: mov32 r9, 0xc0f cmp r8, r9 @@ -89,12 +90,6 @@ end_ca9_scu_l2_resume: ENDPROC(tegra_resume) #endif -#ifdef CONFIG_CACHE_L2X0 - .globl l2x0_saved_regs_addr -l2x0_saved_regs_addr: - .long 0 -#endif - .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_start) diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index a4edbb3abd3d..339fe42cd6fb 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -120,37 +120,6 @@ mov \tmp1, \tmp1, lsr #8 .endm -/* Macro to resume & re-enable L2 cache */ -#ifndef L2X0_CTRL_EN -#define L2X0_CTRL_EN 1 -#endif - -#ifdef CONFIG_CACHE_L2X0 -.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs - W(adr) \tmp1, \phys_l2x0_saved_regs - ldr \tmp1, [\tmp1] - ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] - ldr \tmp3, [\tmp2, #L2X0_CTRL] - tst \tmp3, #L2X0_CTRL_EN - bne exit_l2_resume - ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY] - str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY] - str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL] - str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL] - str \tmp3, [\tmp2, #L2X0_POWER_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL] - str \tmp3, [\tmp2, #L2X0_AUX_CTRL] - mov \tmp3, #L2X0_CTRL_EN - str \tmp3, [\tmp2, #L2X0_CTRL] -exit_l2_resume: -.endm -#else /* CONFIG_CACHE_L2X0 */ -.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs -.endm -#endif /* CONFIG_CACHE_L2X0 */ #else void tegra_pen_lock(void); void tegra_pen_unlock(void); diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 6191603379e1..15ac9fcc96b1 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -70,40 +70,12 @@ u32 tegra_uart_config[3] = { 0, }; -static void __init tegra_init_cache(void) -{ -#ifdef CONFIG_CACHE_L2X0 - static const struct of_device_id pl310_ids[] __initconst = { - { .compatible = "arm,pl310-cache", }, - {} - }; - - struct device_node *np; - int ret; - void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; - u32 aux_ctrl, cache_type; - - np = of_find_matching_node(NULL, pl310_ids); - if (!np) - return; - - cache_type = readl(p + L2X0_CACHE_TYPE); - aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x7C400001; - - ret = l2x0_of_init(aux_ctrl, 0x8200c3fe); - if (!ret) - l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs); -#endif -} - static void __init tegra_init_early(void) { of_register_trusted_foundations(); tegra_apb_io_init(); tegra_init_fuse(); tegra_cpu_reset_handler_init(); - tegra_init_cache(); tegra_powergate_init(); tegra_hotplug_init(); } @@ -191,8 +163,10 @@ static const char * const tegra_dt_board_compat[] = { }; DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") - .map_io = tegra_map_common_io, + .l2c_aux_val = 0x3c400001, + .l2c_aux_mask = 0xc20fc3fe, .smp = smp_ops(tegra_smp_ops), + .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, .init_machine = tegra_dt_init, diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index de544aabf292..9741de956b3e 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -5,8 +5,7 @@ obj-y := cpu.o id.o timer.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500-sdi.o \ - board-mop500-regulators.o \ +obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \ board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c deleted file mode 100644 index fcbf3a13a539..000000000000 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/amba/bus.h> -#include <linux/amba/mmci.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/platform_data/dma-ste-dma40.h> - -#include <asm/mach-types.h> - -#include "db8500-regs.h" -#include "board-mop500.h" -#include "ste-dma40-db8500.h" - -/* - * v2 has a new version of this block that need to be forced, the number found - * in hardware is incorrect - */ -#define U8500_SDI_V2_PERIPHID 0x10480180 - -/* - * SDI 0 (MicroSD slot) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV29_SD_MM0, -}; - -static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV29_SD_MM0, -}; -#endif - -struct mmci_platform_data mop500_sdi0_data = { - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_SD_HIGHSPEED | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_UHS_SDR12 | - MMC_CAP_UHS_SDR25, - .gpio_wp = -1, - .sigdir = MCI_ST_FBCLKEN | - MCI_ST_CMDDIREN | - MCI_ST_DATA0DIREN | - MCI_ST_DATA2DIREN, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi0_dma_cfg_rx, - .dma_tx_param = &mop500_sdi0_dma_cfg_tx, -#endif -}; - -/* - * SDI1 (SDIO WLAN) - */ -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV32_SD_MM1, -}; - -static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV32_SD_MM1, -}; -#endif - -struct mmci_platform_data mop500_sdi1_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_NONREMOVABLE, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &sdi1_dma_cfg_rx, - .dma_tx_param = &sdi1_dma_cfg_tx, -#endif -}; - -/* - * SDI 2 (POP eMMC, not on DB8500ed) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV28_SD_MM2, -}; - -static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV28_SD_MM2, -}; -#endif - -struct mmci_platform_data mop500_sdi2_data = { - .ocr_mask = MMC_VDD_165_195, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NONREMOVABLE | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_CMD23, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi2_dma_cfg_rx, - .dma_tx_param = &mop500_sdi2_dma_cfg_tx, -#endif -}; - -/* - * SDI 4 (on-board eMMC) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV42_SD_MM4, -}; - -static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV42_SD_MM4, -}; -#endif - -struct mmci_platform_data mop500_sdi4_data = { - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NONREMOVABLE | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_CMD23, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi4_dma_cfg_rx, - .dma_tx_param = &mop500_sdi4_dma_cfg_tx, -#endif -}; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 32cc0d8d8a0e..7c7b0adca582 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -8,12 +8,7 @@ #define __BOARD_MOP500_H #include <linux/platform_data/asoc-ux500-msp.h> -#include <linux/amba/mmci.h> -extern struct mmci_platform_data mop500_sdi0_data; -extern struct mmci_platform_data mop500_sdi1_data; -extern struct mmci_platform_data mop500_sdi2_data; -extern struct mmci_platform_data mop500_sdi4_data; extern struct msp_i2s_platform_data msp0_platform_data; extern struct msp_i2s_platform_data msp1_platform_data; extern struct msp_i2s_platform_data msp2_platform_data; diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 264f894c0e3d..842ebedbdd1c 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -35,10 +35,16 @@ static int __init ux500_l2x0_unlock(void) return 0; } -static int __init ux500_l2x0_init(void) +static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) { - u32 aux_val = 0x3e000000; + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} +static int __init ux500_l2x0_init(void) +{ if (cpu_is_u8500_family() || cpu_is_ux540_family()) l2x0_base = __io_address(U8500_L2CC_BASE); else @@ -48,28 +54,12 @@ static int __init ux500_l2x0_init(void) /* Unlock before init */ ux500_l2x0_unlock(); - /* DBx540's L2 has 128KB way size */ - if (cpu_is_ux540_family()) - /* 128KB way size */ - aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); - else - /* 64KB way size */ - aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + outer_cache.write_sec = ux500_l2c310_write_sec; - /* 64KB way size, 8 way associativity, force WA */ if (of_have_populated_dt()) - l2x0_of_init(aux_val, 0xc0000fff); + l2x0_of_init(0, ~0); else - l2x0_init(l2x0_base, aux_val, 0xc0000fff); - - /* - * We can't disable l2 as we are in non secure mode, currently - * this seems be called only during kexec path. So let's - * override outer.disable with nasty assignment until we have - * some SMI service available. - */ - outer_cache.disable = NULL; - outer_cache.set_debug = NULL; + l2x0_init(l2x0_base, 0, ~0); return 0; } diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8820f602fcd2..fa308f07fae5 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -146,10 +146,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index f2c89fb8fca9..be83ba25f81b 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -310,6 +310,21 @@ static struct platform_device char_lcd_device = { .resource = char_lcd_resources, }; +static struct resource leds_resources[] = { + { + .start = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET, + .end = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_device = { + .name = "versatile-leds", + .id = -1, + .num_resources = ARRAY_SIZE(leds_resources), + .resource = leds_resources, +}; + /* * Clock handling */ @@ -795,6 +810,7 @@ void __init versatile_init(void) platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); platform_device_register(&char_lcd_device); + platform_device_register(&leds_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 657d52d0391f..90249cfc37b3 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -4,6 +4,7 @@ config ARCH_VEXPRESS select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC + select ARM_GLOBAL_TIMER select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE select HAVE_ARM_SCU if SMP @@ -18,6 +19,8 @@ config ARCH_VEXPRESS select POWER_SUPPLY select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG + select VEXPRESS_SYSCFG + select MFD_VEXPRESS_SYSREG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index bde4374ab6d5..152fad91b3ae 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -4,10 +4,9 @@ /* Tile's peripherals static mappings should start here */ #define V2T_PERIPH 0xf8200000 -void vexpress_dt_smp_map_io(void); - bool vexpress_smp_init_ops(void); extern struct smp_operations vexpress_smp_ops; +extern struct smp_operations vexpress_smp_dt_ops; extern void vexpress_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 6f34497a4245..86150d7a2e7d 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -45,6 +45,23 @@ static void __init ct_ca9x4_map_io(void) iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } +static void __init ca9x4_l2_init(void) +{ +#ifdef CONFIG_CACHE_L2X0 + void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); + + if (l2x0_base) { + /* set RAM latencies to 1 cycle for this core tile. */ + writel(0, l2x0_base + L310_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L310_DATA_LATENCY_CTRL); + + l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); + } else { + pr_err("L2C: unable to map L2 cache controller\n"); + } +#endif +} + #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER); @@ -63,6 +80,7 @@ static void __init ct_ca9x4_init_irq(void) gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K), ioremap(A9_MPCORE_GIC_CPU, SZ_256)); ca9x4_twd_init(); + ca9x4_l2_init(); } static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) @@ -128,6 +146,10 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct clk_lookup osc1_lookup = { + .dev_id = "ct:clcd", +}; + static struct platform_device osc1_device = { .name = "vexpress-osc", .id = 1, @@ -135,30 +157,18 @@ static struct platform_device osc1_device = { .resource = (struct resource []) { VEXPRESS_RES_FUNC(0xf, 1), }, + .dev.platform_data = &osc1_lookup, }; static void __init ct_ca9x4_init(void) { int i; -#ifdef CONFIG_CACHE_L2X0 - void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); - - /* set RAM latencies to 1 cycle for this core tile. */ - writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); - - l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); -#endif - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); platform_device_register(&pmu_device); - platform_device_register(&osc1_device); - - WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev), - NULL, "ct:clcd")); + vexpress_syscfg_device_register(&osc1_device); } #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 993c9ae5dc5e..a1f3804fd5a5 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,8 +12,7 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/of.h> -#include <linux/of_fdt.h> +#include <linux/of_address.h> #include <linux/vexpress.h> #include <asm/mcpm.h> @@ -26,154 +25,13 @@ #include "core.h" -#if defined(CONFIG_OF) - -static enum { - GENERIC_SCU, - CORTEX_A9_SCU, -} vexpress_dt_scu __initdata = GENERIC_SCU; - -static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = { - .virtual = V2T_PERIPH, - /* .pfn set in vexpress_dt_init_cortex_a9_scu() */ - .length = SZ_128, - .type = MT_DEVICE, -}; - -static void *vexpress_dt_cortex_a9_scu_base __initdata; - -const static char *vexpress_dt_cortex_a9_match[] __initconst = { - "arm,cortex-a5-scu", - "arm,cortex-a9-scu", - NULL -}; - -static int __init vexpress_dt_find_scu(unsigned long node, - const char *uname, int depth, void *data) -{ - if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) { - phys_addr_t phys_addr; - __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL); - - if (WARN_ON(!reg)) - return -EINVAL; - - phys_addr = be32_to_cpup(reg); - vexpress_dt_scu = CORTEX_A9_SCU; - - vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr); - iotable_init(&vexpress_dt_cortex_a9_scu_map, 1); - vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256); - if (WARN_ON(!vexpress_dt_cortex_a9_scu_base)) - return -EFAULT; - } - - return 0; -} - -void __init vexpress_dt_smp_map_io(void) -{ - if (initial_boot_params) - WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL)); -} - -static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname, - int depth, void *data) -{ - static int prev_depth = -1; - static int nr_cpus = -1; - - if (prev_depth > depth && nr_cpus > 0) - return nr_cpus; - - if (nr_cpus < 0 && strcmp(uname, "cpus") == 0) - nr_cpus = 0; - - if (nr_cpus >= 0) { - const char *device_type = of_get_flat_dt_prop(node, - "device_type", NULL); - - if (device_type && strcmp(device_type, "cpu") == 0) - nr_cpus++; - } - - prev_depth = depth; - - return 0; -} - -static void __init vexpress_dt_smp_init_cpus(void) -{ - int ncores = 0, i; - - switch (vexpress_dt_scu) { - case GENERIC_SCU: - ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL); - break; - case CORTEX_A9_SCU: - ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base); - break; - default: - WARN_ON(1); - break; - } - - if (ncores < 2) - return; - - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; ++i) - set_cpu_possible(i, true); -} - -static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) -{ - int i; - - switch (vexpress_dt_scu) { - case GENERIC_SCU: - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - break; - case CORTEX_A9_SCU: - scu_enable(vexpress_dt_cortex_a9_scu_base); - break; - default: - WARN_ON(1); - break; - } -} - -#else - -static void __init vexpress_dt_smp_init_cpus(void) -{ - WARN_ON(1); -} - -void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) -{ - WARN_ON(1); -} - -#endif - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ static void __init vexpress_smp_init_cpus(void) { - if (ct_desc) - ct_desc->init_cpu_map(); - else - vexpress_dt_smp_init_cpus(); - + ct_desc->init_cpu_map(); } static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) @@ -182,10 +40,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ - if (ct_desc) - ct_desc->smp_enable(max_cpus); - else - vexpress_dt_smp_prepare_cpus(max_cpus); + ct_desc->smp_enable(max_cpus); /* * Write the address of secondary startup into the @@ -223,3 +78,39 @@ bool __init vexpress_smp_init_ops(void) #endif return false; } + +#if defined(CONFIG_OF) + +static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = { + { .compatible = "arm,cortex-a5-scu", }, + { .compatible = "arm,cortex-a9-scu", }, + {} +}; + +static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *scu = of_find_matching_node(NULL, + vexpress_smp_dt_scu_match); + + if (scu) + scu_enable(of_iomap(scu, 0)); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + vexpress_flags_set(virt_to_phys(versatile_secondary_startup)); +} + +struct smp_operations __initdata vexpress_smp_dt_ops = { + .smp_prepare_cpus = vexpress_smp_dt_prepare_cpus, + .smp_secondary_init = versatile_secondary_init, + .smp_boot_secondary = versatile_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = vexpress_cpu_die, +#endif +}; + +#endif diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 29e7785a54bc..b743a0ae02ce 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -209,7 +209,7 @@ static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster) #define POLL_MSEC 10 #define TIMEOUT_MSEC 1000 -static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster) +static int tc2_pm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) { unsigned tries; @@ -290,7 +290,7 @@ static void tc2_pm_powered_up(void) static const struct mcpm_platform_ops tc2_pm_power_ops = { .power_up = tc2_pm_power_up, .power_down = tc2_pm_power_down, - .power_down_finish = tc2_pm_power_down_finish, + .wait_for_powerdown = tc2_pm_wait_for_powerdown, .suspend = tc2_pm_suspend, .powered_up = tc2_pm_powered_up, }; diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 4f8b8cb17ff5..6ff681a24ba7 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -201,8 +201,9 @@ static struct platform_device v2m_cf_device = { static struct mmci_platform_data v2m_mmci_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_wp = VEXPRESS_GPIO_MMC_WPROT, - .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN, + .status = vexpress_get_mci_cardin, + .gpio_cd = -1, + .gpio_wp = -1, }; static struct resource v2m_sysreg_resources[] = { @@ -340,11 +341,6 @@ static void __init v2m_init(void) regulator_register_fixed(0, v2m_eth_supplies, ARRAY_SIZE(v2m_eth_supplies)); - platform_device_register(&v2m_muxfpga_device); - platform_device_register(&v2m_shutdown_device); - platform_device_register(&v2m_reboot_device); - platform_device_register(&v2m_dvimode_device); - platform_device_register(&v2m_sysreg_device); platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); @@ -356,6 +352,11 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); + vexpress_syscfg_device_register(&v2m_muxfpga_device); + vexpress_syscfg_device_register(&v2m_shutdown_device); + vexpress_syscfg_device_register(&v2m_reboot_device); + vexpress_syscfg_device_register(&v2m_dvimode_device); + ct_desc->init_tile(); } @@ -369,71 +370,9 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_machine = v2m_init, MACHINE_END -static struct map_desc v2m_rs1_io_desc __initdata = { - .virtual = V2M_PERIPH, - .pfn = __phys_to_pfn(0x1c000000), - .length = SZ_2M, - .type = MT_DEVICE, -}; - -static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname, - int depth, void *data) -{ - const char **map = data; - - if (strcmp(uname, "motherboard") != 0) - return 0; - - *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL); - - return 1; -} - -void __init v2m_dt_map_io(void) -{ - const char *map = NULL; - - of_scan_flat_dt(v2m_dt_scan_memory_map, &map); - - if (map && strcmp(map, "rs1") == 0) - iotable_init(&v2m_rs1_io_desc, 1); - else - iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); - -#if defined(CONFIG_SMP) - vexpress_dt_smp_map_io(); -#endif -} - -void __init v2m_dt_init_early(void) -{ - u32 dt_hbi; - - vexpress_sysreg_of_early_init(); - - /* Confirm board type against DT property, if available */ - if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { - u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); - - if (WARN_ON(dt_hbi != hbi)) - pr_warning("vexpress: DT HBI (%x) is not matching " - "hardware (%x)!\n", dt_hbi, hbi); - } - - versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); -} - -static const struct of_device_id v2m_dt_bus_match[] __initconst = { - { .compatible = "simple-bus", }, - { .compatible = "arm,amba-bus", }, - { .compatible = "arm,vexpress,config-bus", }, - {} -}; - static void __init v2m_dt_init(void) { - l2x0_of_init(0x00400000, 0xfe0fffff); - of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const v2m_dt_match[] __initconst = { @@ -443,9 +382,9 @@ static const char * const v2m_dt_match[] __initconst = { DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, - .smp = smp_ops(vexpress_smp_ops), + .l2c_aux_val = 0x00400000, + .l2c_aux_mask = 0xfe0fffff, + .smp = smp_ops(vexpress_smp_dt_ops), .smp_init = smp_init_ops(vexpress_smp_init_ops), - .map_io = v2m_dt_map_io, - .init_early = v2m_dt_init_early, .init_machine = v2m_dt_init, MACHINE_END diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 58c2b844e0a3..573e0db1d0f0 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,14 +1,16 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 - select ARM_AMBA - select ARM_GIC select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP + select ARCH_SUPPORTS_BIG_ENDIAN + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER if !CPU_FREQ + select CADENCE_TTC_TIMER select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ICST - select CADENCE_TTC_TIMER - select ARM_GLOBAL_TIMER if !CPU_FREQ select MFD_SYSCON + select SOC_BUS help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 6fcc584c1a11..31a6fa40ba37 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -29,6 +29,8 @@ #include <linux/memblock.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -37,10 +39,15 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/smp_scu.h> +#include <asm/system_info.h> #include <asm/hardware/cache-l2x0.h> #include "common.h" +#define ZYNQ_DEVCFG_MCTRL 0x80 +#define ZYNQ_DEVCFG_PS_VERSION_SHIFT 28 +#define ZYNQ_DEVCFG_PS_VERSION_MASK 0xF + void __iomem *zynq_scu_base; /** @@ -60,19 +67,76 @@ static struct platform_device zynq_cpuidle_device = { }; /** + * zynq_get_revision - Get Zynq silicon revision + * + * Return: Silicon version or -1 otherwise + */ +static int __init zynq_get_revision(void) +{ + struct device_node *np; + void __iomem *zynq_devcfg_base; + u32 revision; + + np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-devcfg-1.0"); + if (!np) { + pr_err("%s: no devcfg node found\n", __func__); + return -1; + } + + zynq_devcfg_base = of_iomap(np, 0); + if (!zynq_devcfg_base) { + pr_err("%s: Unable to map I/O memory\n", __func__); + return -1; + } + + revision = readl(zynq_devcfg_base + ZYNQ_DEVCFG_MCTRL); + revision >>= ZYNQ_DEVCFG_PS_VERSION_SHIFT; + revision &= ZYNQ_DEVCFG_PS_VERSION_MASK; + + iounmap(zynq_devcfg_base); + + return revision; +} + +/** * zynq_init_machine - System specific initialization, intended to be * called from board specific initialization. */ static void __init zynq_init_machine(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device *parent = NULL; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + goto out; + + system_rev = zynq_get_revision(); + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Xilinx Zynq"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", + zynq_slcr_get_device_id()); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + goto out; + } + + parent = soc_device_to_device(soc_dev); + +out: /* - * 64KB way size, 8-way associativity, parity disabled + * Finished with the static registrations now; fill in the missing + * devices */ - l2x0_of_init(0x02060000, 0xF0F0FFFF); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); platform_device_register(&zynq_cpuidle_device); platform_device_register_full(&devinfo); @@ -133,6 +197,9 @@ static const char * const zynq_dt_match[] = { }; DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") + /* 64KB way size, 8-way associativity, parity disabled */ + .l2c_aux_val = 0x02000000, + .l2c_aux_mask = 0xf0ffffff, .smp = smp_ops(zynq_smp_ops), .map_io = zynq_map_io, .init_irq = zynq_irq_init, diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index b097844d3175..f652f0a884a6 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -24,6 +24,7 @@ extern int zynq_early_slcr_init(void); extern void zynq_slcr_system_reset(void); extern void zynq_slcr_cpu_stop(int cpu); extern void zynq_slcr_cpu_start(int cpu); +extern u32 zynq_slcr_get_device_id(void); #ifdef CONFIG_SMP extern void secondary_startup(void); diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S index 57a32869f0aa..dd8c071941e7 100644 --- a/arch/arm/mach-zynq/headsmp.S +++ b/arch/arm/mach-zynq/headsmp.S @@ -8,9 +8,12 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> ENTRY(zynq_secondary_trampoline) - ldr r0, [pc] +ARM_BE8(setend be) @ ensure we are in BE8 mode + ldr r0, zynq_secondary_trampoline_jump +ARM_BE8(rev r0, r0) bx r0 .globl zynq_secondary_trampoline_jump zynq_secondary_trampoline_jump: diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index a37d49a6e657..c43a2d16e223 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -26,10 +26,13 @@ #define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */ #define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */ #define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */ +#define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */ #define SLCR_UNLOCK_MAGIC 0xDF0D #define SLCR_A9_CPU_CLKSTOP 0x10 #define SLCR_A9_CPU_RST 0x1 +#define SLCR_PSS_IDCODE_DEVICE_SHIFT 12 +#define SLCR_PSS_IDCODE_DEVICE_MASK 0x1F static void __iomem *zynq_slcr_base; static struct regmap *zynq_slcr_regmap; @@ -83,6 +86,22 @@ static inline int zynq_slcr_unlock(void) } /** + * zynq_slcr_get_device_id - Read device code id + * + * Return: Device code id + */ +u32 zynq_slcr_get_device_id(void) +{ + u32 val; + + zynq_slcr_read(&val, SLCR_PSS_IDCODE); + val >>= SLCR_PSS_IDCODE_DEVICE_SHIFT; + val &= SLCR_PSS_IDCODE_DEVICE_MASK; + + return val; +} + +/** * zynq_slcr_system_reset - Reset the entire system. */ void zynq_slcr_system_reset(void) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5bf7c3c3b301..eda0dd0ab97b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -897,6 +897,57 @@ config CACHE_PL310 This option enables optimisations for the PL310 cache controller. +config PL310_ERRATA_588369 + bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" + depends on CACHE_L2X0 + help + The PL310 L2 cache controller implements three types of Clean & + Invalidate maintenance operations: by Physical Address + (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). + They are architecturally defined to behave as the execution of a + clean operation followed immediately by an invalidate operation, + both performing to the same memory location. This functionality + is not correctly implemented in PL310 as clean lines are not + invalidated as a result of these operations. + +config PL310_ERRATA_727915 + bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" + depends on CACHE_L2X0 + help + PL310 implements the Clean & Invalidate by Way L2 cache maintenance + operation (offset 0x7FC). This operation runs in background so that + PL310 can handle normal accesses while it is in progress. Under very + rare circumstances, due to this erratum, write data can be lost when + PL310 treats a cacheable write transaction during a Clean & + Invalidate by Way operation. + +config PL310_ERRATA_753970 + bool "PL310 errata: cache sync operation may be faulty" + depends on CACHE_PL310 + help + This option enables the workaround for the 753970 PL310 (r3p0) erratum. + + Under some condition the effect of cache sync operation on + the store buffer still remains when the operation completes. + This means that the store buffer is always asked to drain and + this prevents it from merging any further writes. The workaround + is to replace the normal offset of cache sync operation (0x730) + by another offset targeting an unmapped PL310 register 0x740. + This has the same effect as the cache sync operation: store buffer + drain and waiting for all buffers empty. + +config PL310_ERRATA_769419 + bool "PL310 errata: no automatic Store Buffer drain" + depends on CACHE_L2X0 + help + On revisions of the PL310 prior to r3p2, the Store Buffer does + not automatically drain. This can cause normal, non-cacheable + writes to be retained when the memory system is idle, leading + to suboptimal I/O performance for drivers using coherent DMA. + This option adds a write barrier to the cpu_idle loop so that, + on systems with an outer cache, the store buffer is drained + explicitly. + config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 7f39ce2f841f..91da64de440f 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -95,7 +95,8 @@ obj-$(CONFIG_CPU_V7M) += proc-v7m.o AFLAGS_proc-v6.o :=-Wa,-march=armv6 AFLAGS_proc-v7.o :=-Wa,-march=armv7-a +obj-$(CONFIG_OUTER_CACHE) += l2c-common.o obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 924036473b16..b8cb1a2688a0 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -28,6 +28,7 @@ #include <asm/opcodes.h> #include "fault.h" +#include "mm.h" /* * 32-bit misaligned trap handler (c) 1998 San Mehat (CCC) -July 1998 @@ -81,6 +82,7 @@ static unsigned long ai_word; static unsigned long ai_dword; static unsigned long ai_multi; static int ai_usermode; +static unsigned long cr_no_alignment; core_param(alignment, ai_usermode, int, 0600); @@ -91,7 +93,7 @@ core_param(alignment, ai_usermode, int, 0600); /* Return true if and only if the ARMv6 unaligned access model is in use. */ static bool cpu_is_v6_unaligned(void) { - return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U); + return cpu_architecture() >= CPU_ARCH_ARMv6 && get_cr() & CR_U; } static int safe_usermode(int new_usermode, bool warn) @@ -949,6 +951,13 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 0; } +static int __init noalign_setup(char *__unused) +{ + set_cr(__clear_cr(CR_A)); + return 1; +} +__setup("noalign", noalign_setup); + /* * This needs to be done after sysctl_init, otherwise sys/ will be * overwritten. Actually, this shouldn't be in sys/ at all since @@ -966,14 +975,12 @@ static int __init alignment_init(void) return -ENOMEM; #endif -#ifdef CONFIG_CPU_CP15 if (cpu_is_v6_unaligned()) { - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); + set_cr(__clear_cr(CR_A)); ai_usermode = safe_usermode(ai_usermode, false); } -#endif + + cr_no_alignment = get_cr() & ~CR_A; hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN, "alignment exception"); diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index dc814a548056..e028a7f2ebcc 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -350,7 +350,6 @@ void __init feroceon_l2_init(int __l2_wt_override) outer_cache.inv_range = feroceon_l2_inv_range; outer_cache.clean_range = feroceon_l2_clean_range; outer_cache.flush_range = feroceon_l2_flush_range; - outer_cache.inv_all = l2_inv_all; enable_l2(); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 7abde2ce8973..efc5cabf70e0 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,18 +16,33 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/cpu.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/smp.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/cputype.h> #include <asm/hardware/cache-l2x0.h> #include "cache-tauros3.h" #include "cache-aurora-l2.h" +struct l2c_init_data { + const char *type; + unsigned way_size_0; + unsigned num_lock; + void (*of_parse)(const struct device_node *, u32 *, u32 *); + void (*enable)(void __iomem *, u32, unsigned); + void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); + void (*save)(void __iomem *); + struct outer_cache_fns outer_cache; +}; + #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; @@ -36,96 +51,116 @@ static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; -/* Aurora don't have the cache ID register available, so we have to - * pass it though the device tree */ -static u32 cache_id_part_number_from_dt; - struct l2x0_regs l2x0_saved_regs; -struct l2x0_of_data { - void (*setup)(const struct device_node *, u32 *, u32 *); - void (*save)(void); - struct outer_cache_fns outer_cache; -}; - -static bool of_init = false; - -static inline void cache_wait_way(void __iomem *reg, unsigned long mask) +/* + * Common code for all cache controllers. + */ +static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) cpu_relax(); } -#ifdef CONFIG_CACHE_PL310 -static inline void cache_wait(void __iomem *reg, unsigned long mask) +/* + * By default, we write directly to secure registers. Platforms must + * override this if they are running non-secure. + */ +static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg) { - /* cache operations by line are atomic on PL310 */ + if (val == readl_relaxed(base + reg)) + return; + if (outer_cache.write_sec) + outer_cache.write_sec(val, reg); + else + writel_relaxed(val, base + reg); } -#else -#define cache_wait cache_wait_way -#endif -static inline void cache_sync(void) +/* + * This should only be called when we have a requirement that the + * register be written due to a work-around, as platforms running + * in non-secure mode may not be able to access this register. + */ +static inline void l2c_set_debug(void __iomem *base, unsigned long val) { - void __iomem *base = l2x0_base; - - writel_relaxed(0, base + sync_reg_offset); - cache_wait(base + L2X0_CACHE_SYNC, 1); + l2c_write_sec(val, base, L2X0_DEBUG_CTRL); } -static inline void l2x0_clean_line(unsigned long addr) +static void __l2c_op_way(void __iomem *reg) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(l2x0_way_mask, reg); + l2c_wait_mask(reg, l2x0_way_mask); } -static inline void l2x0_inv_line(unsigned long addr) +static inline void l2c_unlock(void __iomem *base, unsigned num) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_INV_LINE_PA); + unsigned i; + + for (i = 0; i < num; i++) { + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } } -#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) -static inline void debug_writel(unsigned long val) +/* + * Enable the L2 cache controller. This function must only be + * called when the cache controller is known to be disabled. + */ +static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock) { - if (outer_cache.set_debug) - outer_cache.set_debug(val); + unsigned long flags; + + l2c_write_sec(aux, base, L2X0_AUX_CTRL); + + l2c_unlock(base, num_lock); + + local_irq_save(flags); + __l2c_op_way(base + L2X0_INV_WAY); + writel_relaxed(0, base + sync_reg_offset); + l2c_wait_mask(base + sync_reg_offset, 1); + local_irq_restore(flags); + + l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL); } -static void pl310_set_debug(unsigned long val) +static void l2c_disable(void) { - writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL); + void __iomem *base = l2x0_base; + + outer_cache.flush_all(); + l2c_write_sec(0, base, L2X0_CTRL); + dsb(st); } -#else -/* Optimised out for non-errata case */ -static inline void debug_writel(unsigned long val) + +#ifdef CONFIG_CACHE_PL310 +static inline void cache_wait(void __iomem *reg, unsigned long mask) { + /* cache operations by line are atomic on PL310 */ } - -#define pl310_set_debug NULL +#else +#define cache_wait l2c_wait_mask #endif -#ifdef CONFIG_PL310_ERRATA_588369 -static inline void l2x0_flush_line(unsigned long addr) +static inline void cache_sync(void) { void __iomem *base = l2x0_base; - /* Clean by PA followed by Invalidate by PA */ - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA); - cache_wait(base + L2X0_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_INV_LINE_PA); + writel_relaxed(0, base + sync_reg_offset); + cache_wait(base + L2X0_CACHE_SYNC, 1); } -#else -static inline void l2x0_flush_line(unsigned long addr) +#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) +static inline void debug_writel(unsigned long val) +{ + l2c_set_debug(l2x0_base, val); +} +#else +/* Optimised out for non-errata case */ +static inline void debug_writel(unsigned long val) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA); } #endif @@ -141,8 +176,7 @@ static void l2x0_cache_sync(void) static void __l2x0_flush_all(void) { debug_writel(0x03); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); - cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); + __l2c_op_way(l2x0_base + L2X0_CLEAN_INV_WAY); cache_sync(); debug_writel(0x00); } @@ -157,275 +191,883 @@ static void l2x0_flush_all(void) raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_clean_all(void) +static void l2x0_disable(void) { unsigned long flags; - /* clean all ways */ raw_spin_lock_irqsave(&l2x0_lock, flags); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY); - cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask); - cache_sync(); + __l2x0_flush_all(); + l2c_write_sec(0, l2x0_base, L2X0_CTRL); + dsb(st); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_inv_all(void) +static void l2c_save(void __iomem *base) { - unsigned long flags; + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); +} - /* invalidate all ways */ - raw_spin_lock_irqsave(&l2x0_lock, flags); - /* Invalidating when L2 is enabled is a nono */ - BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); +/* + * L2C-210 specific code. + * + * The L2C-2x0 PA, set/way and sync operations are atomic, but we must + * ensure that no background operation is running. The way operations + * are all background tasks. + * + * While a background operation is in progress, any new operation is + * ignored (unspecified whether this causes an error.) Thankfully, not + * used on SMP. + * + * Never has a different sync register other than L2X0_CACHE_SYNC, but + * we use sync_reg_offset here so we can share some of this with L2C-310. + */ +static void __l2c210_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + sync_reg_offset); } -static void l2x0_inv_range(unsigned long start, unsigned long end) +static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end) +{ + while (start < end) { + writel_relaxed(start, reg); + start += CACHE_LINE_SIZE; + } +} + +static void l2c210_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; - unsigned long flags; - raw_spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); - debug_writel(0x03); - l2x0_flush_line(start); - debug_writel(0x00); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); - debug_writel(0x03); - l2x0_flush_line(end); - debug_writel(0x00); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_clean_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_all(void) +{ + void __iomem *base = l2x0_base; + + BUG_ON(!irqs_disabled()); + + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + __l2c210_cache_sync(base); +} + +static void l2c210_sync(void) +{ + __l2c210_cache_sync(l2x0_base); +} + +static void l2c210_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 1); +} + +static const struct l2c_init_data l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c210_resume, + }, +}; + +/* + * L2C-220 specific code. + * + * All operations are background operations: they have to be waited for. + * Conflicting requests generate a slave error (which will cause an + * imprecise abort.) Never uses sync_reg_offset, so we hard-code the + * sync register here. + * + * However, we can re-use the l2c210_resume call. + */ +static inline void __l2c220_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + L2X0_CACHE_SYNC); + l2c_wait_mask(base + L2X0_CACHE_SYNC, 1); +} + +static void l2c220_op_way(void __iomem *base, unsigned reg) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + reg); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end, unsigned long flags) +{ + raw_spinlock_t *lock = &l2x0_lock; + while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); while (start < blk_end) { - l2x0_inv_line(start); + l2c_wait_mask(reg, 1); + writel_relaxed(start, reg); start += CACHE_LINE_SIZE; } if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); } } - cache_wait(base + L2X0_INV_LINE_PA, 1); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + return flags; } -static void l2x0_clean_range(unsigned long start, unsigned long end) +static void l2c220_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; - if ((end - start) >= l2x0_size) { - l2x0_clean_all(); - return; - } - raw_spin_lock_irqsave(&l2x0_lock, flags); - start &= ~(CACHE_LINE_SIZE - 1); - while (start < end) { - unsigned long blk_end = start + min(end - start, 4096UL); - - while (start < blk_end) { - l2x0_clean_line(start); + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } - if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } } - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - cache_sync(); + + flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_INV_LINE_PA, 1); + __l2c220_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_range(unsigned long start, unsigned long end) +static void l2c220_clean_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; + start &= ~(CACHE_LINE_SIZE - 1); if ((end - start) >= l2x0_size) { - l2x0_flush_all(); + l2c220_op_way(base, L2X0_CLEAN_WAY); return; } raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + start &= ~(CACHE_LINE_SIZE - 1); + if ((end - start) >= l2x0_size) { + l2c220_op_way(base, L2X0_CLEAN_INV_WAY); + return; + } + + raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_all(void) +{ + l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY); +} + +static void l2c220_sync(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c220_cache_sync(l2x0_base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock) +{ + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L220_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); +} + +static const struct l2c_init_data l2c220_data = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c220_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c210_resume, + }, +}; + +/* + * L2C-310 specific code. + * + * Very similar to L2C-210, the PA, set/way and sync operations are atomic, + * and the way operations are all background tasks. However, issuing an + * operation while a background operation is in progress results in a + * SLVERR response. We can reuse: + * + * __l2c210_cache_sync (using sync_reg_offset) + * l2c210_sync + * l2c210_inv_range (if 588369 is not applicable) + * l2c210_clean_range + * l2c210_flush_range (if 588369 is not applicable) + * l2c210_flush_all (if 727915 is not applicable) + * + * Errata: + * 588369: PL310 R0P0->R1P0, fixed R2P0. + * Affects: all clean+invalidate operations + * clean and invalidate skips the invalidate step, so we need to issue + * separate operations. We also require the above debug workaround + * enclosing this code fragment on affected parts. On unaffected parts, + * we must not use this workaround without the debug register writes + * to avoid exposing a problem similar to 727915. + * + * 727915: PL310 R2P0->R3P0, fixed R3P1. + * Affects: clean+invalidate by way + * clean and invalidate by way runs in the background, and a store can + * hit the line between the clean operation and invalidate operation, + * resulting in the store being lost. + * + * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2. + * Affects: 8x64-bit (double fill) line fetches + * double fill line fetches can fail to cause dirty data to be evicted + * from the cache before the new data overwrites the second line. + * + * 753970: PL310 R3P0, fixed R3P1. + * Affects: sync + * prevents merging writes after the sync operation, until another L2C + * operation is performed (or a number of other conditions.) + * + * 769419: PL310 R0P0->R3P1, fixed R3P2. + * Affects: store buffer + * store buffer is not automatically drained. + */ +static void l2c310_inv_range_erratum(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + unsigned long flags; + + /* Erratum 588369 for both clean+invalidate operations */ + raw_spin_lock_irqsave(&l2x0_lock, flags); + l2c_set_debug(base, 0x03); + + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(end, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(end, base + L2X0_INV_LINE_PA); + } + + l2c_set_debug(base, 0x00); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + } + + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c310_flush_range_erratum(unsigned long start, unsigned long end) +{ + raw_spinlock_t *lock = &l2x0_lock; + unsigned long flags; + void __iomem *base = l2x0_base; + + raw_spin_lock_irqsave(lock, flags); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); - debug_writel(0x03); + l2c_set_debug(base, 0x03); while (start < blk_end) { - l2x0_flush_line(start); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); start += CACHE_LINE_SIZE; } - debug_writel(0x00); + l2c_set_debug(base, 0x00); if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); } } - cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + __l2c210_cache_sync(base); } -static void l2x0_disable(void) +static void l2c310_flush_all_erratum(void) { + void __iomem *base = l2x0_base; unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); - __l2x0_flush_all(); - writel_relaxed(0, l2x0_base + L2X0_CTRL); - dsb(st); + l2c_set_debug(base, 0x03); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + l2c_set_debug(base, 0x00); + __l2c210_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_unlock(u32 cache_id) +static void __init l2c310_save(void __iomem *base) { - int lockregs; - int i; + unsigned revision; - switch (cache_id & L2X0_CACHE_ID_PART_MASK) { - case L2X0_CACHE_ID_PART_L310: - lockregs = 8; - break; - case AURORA_CACHE_ID: - lockregs = 4; + l2c_save(base); + + l2x0_saved_regs.tag_latency = readl_relaxed(base + + L310_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(base + + L310_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(base + + L310_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(base + + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + /* From r2p0, there is Prefetch offset/control register */ + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base + + L310_PREFETCH_CTRL); + + /* From r3p0, there is Power control register */ + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(base + + L310_POWER_CTRL); +} + +static void l2c310_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { + unsigned revision; + + /* restore pl310 setup */ + writel_relaxed(l2x0_saved_regs.tag_latency, + base + L310_TAG_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.data_latency, + base + L310_DATA_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.filter_end, + base + L310_ADDR_FILTER_END); + writel_relaxed(l2x0_saved_regs.filter_start, + base + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base, + L310_PREFETCH_CTRL); + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base, + L310_POWER_CTRL); + + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); + + /* Re-enable full-line-of-zeros for Cortex-A9 */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + } +} + +static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data) +{ + switch (act & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); break; - default: - /* L210 and unknown types */ - lockregs = 1; + case CPU_DYING: + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); break; } + return NOTIFY_OK; +} - for (i = 0; i < lockregs; i++) { - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + - i * L2X0_LOCKDOWN_STRIDE); - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + - i * L2X0_LOCKDOWN_STRIDE); +static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) +{ + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; + + if (rev >= L310_CACHE_ID_RTL_R2P0) { + if (cortex_a9) { + aux |= L310_AUX_CTRL_EARLY_BRESP; + pr_info("L2C-310 enabling early BRESP for Cortex-A9\n"); + } else if (aux & L310_AUX_CTRL_EARLY_BRESP) { + pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n"); + aux &= ~L310_AUX_CTRL_EARLY_BRESP; + } + } + + if (cortex_a9) { + u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL); + u32 acr = get_auxcr(); + + pr_debug("Cortex-A9 ACR=0x%08x\n", acr); + + if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO)) + pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n"); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3))) + pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n"); + + if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) { + aux |= L310_AUX_CTRL_FULL_LINE_ZERO; + pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n"); + } + } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) { + pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n"); + aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP); + } + + if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) { + u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL); + + pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n", + aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "", + aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "", + 1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK)); + } + + /* r3p0 or later has power control register */ + if (rev >= L310_CACHE_ID_RTL_R3P0) { + u32 power_ctrl; + + l2c_write_sec(L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN, + base, L310_POWER_CTRL); + power_ctrl = readl_relaxed(base + L310_POWER_CTRL); + pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n", + power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis", + power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); + } + + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L310_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) { + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + cpu_notifier(l2c310_cpu_enable_flz, 0); } } -void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +static void __init l2c310_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) { - u32 aux; - u32 cache_id; - u32 way_size = 0; - int ways; - int way_size_shift = L2X0_WAY_SIZE_SHIFT; - const char *type; + unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK; + const char *errata[8]; + unsigned n = 0; + + if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) && + revision < L310_CACHE_ID_RTL_R2P0 && + /* For bcm compatibility */ + fns->inv_range == l2c210_inv_range) { + fns->inv_range = l2c310_inv_range_erratum; + fns->flush_range = l2c310_flush_range_erratum; + errata[n++] = "588369"; + } - l2x0_base = base; - if (cache_id_part_number_from_dt) - cache_id = cache_id_part_number_from_dt; - else - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) && + revision >= L310_CACHE_ID_RTL_R2P0 && + revision < L310_CACHE_ID_RTL_R3P1) { + fns->flush_all = l2c310_flush_all_erratum; + errata[n++] = "727915"; + } + + if (revision >= L310_CACHE_ID_RTL_R3P0 && + revision < L310_CACHE_ID_RTL_R3P2) { + u32 val = readl_relaxed(base + L310_PREFETCH_CTRL); + /* I don't think bit23 is required here... but iMX6 does so */ + if (val & (BIT(30) | BIT(23))) { + val &= ~(BIT(30) | BIT(23)); + l2c_write_sec(val, base, L310_PREFETCH_CTRL); + errata[n++] = "752271"; + } + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) && + revision == L310_CACHE_ID_RTL_R3P0) { + sync_reg_offset = L2X0_DUMMY_REG; + errata[n++] = "753970"; + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_769419)) + errata[n++] = "769419"; + + if (n) { + unsigned i; + pr_info("L2C-310 errat%s", n > 1 ? "a" : "um"); + for (i = 0; i < n; i++) + pr_cont(" %s", errata[i]); + pr_cont(" enabled\n"); + } +} + +static void l2c310_disable(void) +{ + /* + * If full-line-of-zeros is enabled, we must first disable it in the + * Cortex-A9 auxiliary control register before disabling the L2 cache. + */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); + + l2c_disable(); +} + +static const struct l2c_init_data l2c310_init_fns __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + +static void __init __l2c_init(const struct l2c_init_data *data, + u32 aux_val, u32 aux_mask, u32 cache_id) +{ + struct outer_cache_fns fns; + unsigned way_size_bits, ways; + u32 aux, old_aux; + + /* + * Sanity check the aux values. aux_mask is the bits we preserve + * from reading the hardware register, and aux_val is the bits we + * set. + */ + if (aux_val & aux_mask) + pr_alert("L2C: platform provided aux values permit register corruption.\n"); + + old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; + if (old_aux != aux) + pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, aux); + /* Determine the number of ways */ switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: + if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16)) + pr_warn("L2C: DT/platform tries to modify or specify cache size\n"); if (aux & (1 << 16)) ways = 16; else ways = 8; - type = "L310"; -#ifdef CONFIG_PL310_ERRATA_753970 - /* Unmapped register. */ - sync_reg_offset = L2X0_DUMMY_REG; -#endif - if ((cache_id & L2X0_CACHE_ID_RTL_MASK) <= L2X0_CACHE_ID_RTL_R3P0) - outer_cache.set_debug = pl310_set_debug; break; + case L2X0_CACHE_ID_PART_L210: + case L2X0_CACHE_ID_PART_L220: ways = (aux >> 13) & 0xf; - type = "L210"; break; case AURORA_CACHE_ID: - sync_reg_offset = AURORA_SYNC_REG; ways = (aux >> 13) & 0xf; ways = 2 << ((ways + 1) >> 2); - way_size_shift = AURORA_WAY_SIZE_SHIFT; - type = "Aurora"; break; + default: /* Assume unknown chips have 8 ways */ ways = 8; - type = "L2x0 series"; break; } l2x0_way_mask = (1 << ways) - 1; /* - * L2 cache Size = Way size * Number of ways + * way_size_0 is the size that a way_size value of zero would be + * given the calculation: way_size = way_size_0 << way_size_bits. + * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k, + * then way_size_0 would be 8k. + * + * L2 cache size = number of ways * way size. */ - way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17; - way_size = 1 << (way_size + way_size_shift); + way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >> + L2C_AUX_CTRL_WAY_SIZE_SHIFT; + l2x0_size = ways * (data->way_size_0 << way_size_bits); - l2x0_size = ways * way_size * SZ_1K; + fns = data->outer_cache; + fns.write_sec = outer_cache.write_sec; + if (data->fixup) + data->fixup(l2x0_base, cache_id, &fns); /* - * Check if l2x0 controller is already enabled. - * If you are booting from non-secure mode - * accessing the below registers will fault. + * Check if l2x0 controller is already enabled. If we are booting + * in non-secure mode accessing the below registers will fault. */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* Make sure that I&D is not locked down when starting */ - l2x0_unlock(cache_id); + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + data->enable(l2x0_base, aux, data->num_lock); - /* l2x0 controller is disabled */ - writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); + outer_cache = fns; - l2x0_inv_all(); - - /* enable L2X0 */ - writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); - } + /* + * It is strange to save the register state before initialisation, + * but hey, this is what the DT implementations decided to do. + */ + if (data->save) + data->save(l2x0_base); /* Re-read it in case some bits are reserved. */ aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); - /* Save the value for resuming. */ - l2x0_saved_regs.aux_ctrl = aux; + pr_info("%s cache controller enabled, %d ways, %d kB\n", + data->type, ways, l2x0_size >> 10); + pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", + data->type, cache_id, aux); +} + +void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +{ + const struct l2c_init_data *data; + u32 cache_id; + + l2x0_base = base; + + cache_id = readl_relaxed(base + L2X0_CACHE_ID); + + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + default: + case L2X0_CACHE_ID_PART_L210: + data = &l2c210_data; + break; - if (!of_init) { - outer_cache.inv_range = l2x0_inv_range; - outer_cache.clean_range = l2x0_clean_range; - outer_cache.flush_range = l2x0_flush_range; - outer_cache.sync = l2x0_cache_sync; - outer_cache.flush_all = l2x0_flush_all; - outer_cache.inv_all = l2x0_inv_all; - outer_cache.disable = l2x0_disable; + case L2X0_CACHE_ID_PART_L220: + data = &l2c220_data; + break; + + case L2X0_CACHE_ID_PART_L310: + data = &l2c310_init_fns; + break; } - pr_info("%s cache controller enabled\n", type); - pr_info("l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d kB\n", - ways, cache_id, aux, l2x0_size >> 10); + __l2c_init(data, aux_val, aux_mask, cache_id); } #ifdef CONFIG_OF static int l2_wt_override; +/* Aurora don't have the cache ID register available, so we have to + * pass it though the device tree */ +static u32 cache_id_part_number_from_dt; + +static void __init l2x0_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c210_resume, + }, +}; + +static const struct l2c_init_data of_l2c220_data __initconst = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c220_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c210_resume, + }, +}; + +static void __init l2c310_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + L310_LATENCY_CTRL_RD(tag[0] - 1) | + L310_LATENCY_CTRL_WR(tag[1] - 1) | + L310_LATENCY_CTRL_SETUP(tag[2] - 1), + l2x0_base + L310_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + L310_LATENCY_CTRL_RD(data[0] - 1) | + L310_LATENCY_CTRL_WR(data[1] - 1) | + L310_LATENCY_CTRL_SETUP(data[2] - 1), + l2x0_base + L310_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L310_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN, + l2x0_base + L310_ADDR_FILTER_START); + } +} + +static const struct l2c_init_data of_l2c310_data __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + /* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use @@ -524,6 +1166,100 @@ static void aurora_flush_range(unsigned long start, unsigned long end) } } +static void aurora_save(void __iomem *base) +{ + l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL); +} + +static void aurora_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl(base + L2X0_CTRL) & L2X0_CTRL_EN)) { + writel_relaxed(l2x0_saved_regs.aux_ctrl, base + L2X0_AUX_CTRL); + writel_relaxed(l2x0_saved_regs.ctrl, base + L2X0_CTRL); + } +} + +/* + * For Aurora cache in no outer mode, enable via the CP15 coprocessor + * broadcasting of cache commands to L2. + */ +static void __init aurora_enable_no_outer(void __iomem *base, u32 aux, + unsigned num_lock) +{ + u32 u; + + asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u)); + u |= AURORA_CTRL_FW; /* Set the FW bit */ + asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u)); + + isb(); + + l2c_enable(base, aux, num_lock); +} + +static void __init aurora_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) +{ + sync_reg_offset = AURORA_SYNC_REG; +} + +static void __init aurora_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; + u32 mask = AURORA_ACR_REPLACEMENT_MASK; + + of_property_read_u32(np, "cache-id-part", + &cache_id_part_number_from_dt); + + /* Determine and save the write policy */ + l2_wt_override = of_property_read_bool(np, "wt-override"); + + if (l2_wt_override) { + val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; + mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_aurora_with_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = l2c_enable, + .fixup = aurora_fixup, + .save = aurora_save, + .outer_cache = { + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, + .flush_range = aurora_flush_range, + .flush_all = l2x0_flush_all, + .disable = l2x0_disable, + .sync = l2x0_cache_sync, + .resume = aurora_resume, + }, +}; + +static const struct l2c_init_data of_aurora_no_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = aurora_enable_no_outer, + .fixup = aurora_fixup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + }, +}; + /* * For certain Broadcom SoCs, depending on the address range, different offsets * need to be added to the address before passing it to L2 for @@ -588,16 +1324,16 @@ static void bcm_inv_range(unsigned long start, unsigned long end) /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_inv_range(new_start, new_end); + l2c210_inv_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_inv_range(new_start, + l2c210_inv_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } @@ -610,26 +1346,21 @@ static void bcm_clean_range(unsigned long start, unsigned long end) if (unlikely(end <= start)) return; - if ((end - start) >= l2x0_size) { - l2x0_clean_all(); - return; - } - new_start = bcm_l2_phys_addr(start); new_end = bcm_l2_phys_addr(end); /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_clean_range(new_start, new_end); + l2c210_clean_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_clean_range(new_start, + l2c210_clean_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } @@ -643,7 +1374,7 @@ static void bcm_flush_range(unsigned long start, unsigned long end) return; if ((end - start) >= l2x0_size) { - l2x0_flush_all(); + outer_cache.flush_all(); return; } @@ -652,283 +1383,67 @@ static void bcm_flush_range(unsigned long start, unsigned long end) /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_flush_range(new_start, new_end); + l2c210_flush_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_flush_range(new_start, + l2c210_flush_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } -static void __init l2x0_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 data[2] = { 0, 0 }; - u32 tag = 0; - u32 dirty = 0; - u32 val = 0, mask = 0; - - of_property_read_u32(np, "arm,tag-latency", &tag); - if (tag) { - mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; - val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; - } - - of_property_read_u32_array(np, "arm,data-latency", - data, ARRAY_SIZE(data)); - if (data[0] && data[1]) { - mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | - L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; - val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | - ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); - } - - of_property_read_u32(np, "arm,dirty-latency", &dirty); - if (dirty) { - mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; - val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; - } - - *aux_val &= ~mask; - *aux_val |= val; - *aux_mask &= ~mask; -} - -static void __init pl310_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 data[3] = { 0, 0, 0 }; - u32 tag[3] = { 0, 0, 0 }; - u32 filter[2] = { 0, 0 }; - - of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); - if (tag[0] && tag[1] && tag[2]) - writel_relaxed( - ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | - ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | - ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), - l2x0_base + L2X0_TAG_LATENCY_CTRL); - - of_property_read_u32_array(np, "arm,data-latency", - data, ARRAY_SIZE(data)); - if (data[0] && data[1] && data[2]) - writel_relaxed( - ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | - ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | - ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), - l2x0_base + L2X0_DATA_LATENCY_CTRL); - - of_property_read_u32_array(np, "arm,filter-ranges", - filter, ARRAY_SIZE(filter)); - if (filter[1]) { - writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), - l2x0_base + L2X0_ADDR_FILTER_END); - writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, - l2x0_base + L2X0_ADDR_FILTER_START); - } -} - -static void __init pl310_save(void) -{ - u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base + - L2X0_TAG_LATENCY_CTRL); - l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base + - L2X0_DATA_LATENCY_CTRL); - l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base + - L2X0_ADDR_FILTER_END); - l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base + - L2X0_ADDR_FILTER_START); - - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { - /* - * From r2p0, there is Prefetch offset/control register - */ - l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base + - L2X0_PREFETCH_CTRL); - /* - * From r3p0, there is Power control register - */ - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) - l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base + - L2X0_POWER_CTRL); - } -} +/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */ +static const struct l2c_init_data of_bcm_l2x0_data __initconst = { + .type = "BCM-L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .save = l2c310_save, + .outer_cache = { + .inv_range = bcm_inv_range, + .clean_range = bcm_clean_range, + .flush_range = bcm_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; -static void aurora_save(void) +static void __init tauros3_save(void __iomem *base) { - l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL); - l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); -} + l2c_save(base); -static void __init tauros3_save(void) -{ l2x0_saved_regs.aux2_ctrl = - readl_relaxed(l2x0_base + TAUROS3_AUX2_CTRL); + readl_relaxed(base + TAUROS3_AUX2_CTRL); l2x0_saved_regs.prefetch_ctrl = - readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); -} - -static void l2x0_resume(void) -{ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* restore aux ctrl and enable l2 */ - l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); - - writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base + - L2X0_AUX_CTRL); - - l2x0_inv_all(); - - writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); - } -} - -static void pl310_resume(void) -{ - u32 l2x0_revision; - - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* restore pl310 setup */ - writel_relaxed(l2x0_saved_regs.tag_latency, - l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.data_latency, - l2x0_base + L2X0_DATA_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.filter_end, - l2x0_base + L2X0_ADDR_FILTER_END); - writel_relaxed(l2x0_saved_regs.filter_start, - l2x0_base + L2X0_ADDR_FILTER_START); - - l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { - writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - l2x0_base + L2X0_PREFETCH_CTRL); - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) - writel_relaxed(l2x0_saved_regs.pwr_ctrl, - l2x0_base + L2X0_POWER_CTRL); - } - } - - l2x0_resume(); -} - -static void aurora_resume(void) -{ - if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - writel_relaxed(l2x0_saved_regs.aux_ctrl, - l2x0_base + L2X0_AUX_CTRL); - writel_relaxed(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL); - } + readl_relaxed(base + L310_PREFETCH_CTRL); } static void tauros3_resume(void) { - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { writel_relaxed(l2x0_saved_regs.aux2_ctrl, - l2x0_base + TAUROS3_AUX2_CTRL); + base + TAUROS3_AUX2_CTRL); writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - l2x0_base + L2X0_PREFETCH_CTRL); - } + base + L310_PREFETCH_CTRL); - l2x0_resume(); -} - -static void __init aurora_broadcast_l2_commands(void) -{ - __u32 u; - /* Enable Broadcasting of cache commands to L2*/ - __asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u)); - u |= AURORA_CTRL_FW; /* Set the FW bit */ - __asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u)); - isb(); -} - -static void __init aurora_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; - u32 mask = AURORA_ACR_REPLACEMENT_MASK; - - of_property_read_u32(np, "cache-id-part", - &cache_id_part_number_from_dt); - - /* Determine and save the write policy */ - l2_wt_override = of_property_read_bool(np, "wt-override"); - - if (l2_wt_override) { - val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; - mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); } - - *aux_val &= ~mask; - *aux_val |= val; - *aux_mask &= ~mask; } -static const struct l2x0_of_data pl310_data = { - .setup = pl310_of_setup, - .save = pl310_save, - .outer_cache = { - .resume = pl310_resume, - .inv_range = l2x0_inv_range, - .clean_range = l2x0_clean_range, - .flush_range = l2x0_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data l2x0_data = { - .setup = l2x0_of_setup, - .save = NULL, - .outer_cache = { - .resume = l2x0_resume, - .inv_range = l2x0_inv_range, - .clean_range = l2x0_clean_range, - .flush_range = l2x0_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data aurora_with_outer_data = { - .setup = aurora_of_setup, - .save = aurora_save, - .outer_cache = { - .resume = aurora_resume, - .inv_range = aurora_inv_range, - .clean_range = aurora_clean_range, - .flush_range = aurora_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data aurora_no_outer_data = { - .setup = aurora_of_setup, - .save = aurora_save, - .outer_cache = { - .resume = aurora_resume, - }, -}; - -static const struct l2x0_of_data tauros3_data = { - .setup = NULL, +static const struct l2c_init_data of_tauros3_data __initconst = { + .type = "Tauros3", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c_enable, .save = tauros3_save, /* Tauros3 broadcasts L1 cache operations to L2 */ .outer_cache = { @@ -936,43 +1451,26 @@ static const struct l2x0_of_data tauros3_data = { }, }; -static const struct l2x0_of_data bcm_l2x0_data = { - .setup = pl310_of_setup, - .save = pl310_save, - .outer_cache = { - .resume = pl310_resume, - .inv_range = bcm_inv_range, - .clean_range = bcm_clean_range, - .flush_range = bcm_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - +#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns } static const struct of_device_id l2x0_ids[] __initconst = { - { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, - { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, - { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, - { .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */ - .data = (void *)&bcm_l2x0_data}, - { .compatible = "brcm,bcm11351-a2-pl310-cache", - .data = (void *)&bcm_l2x0_data}, - { .compatible = "marvell,aurora-outer-cache", - .data = (void *)&aurora_with_outer_data}, - { .compatible = "marvell,aurora-system-cache", - .data = (void *)&aurora_no_outer_data}, - { .compatible = "marvell,tauros3-cache", - .data = (void *)&tauros3_data }, + L2C_ID("arm,l210-cache", of_l2c210_data), + L2C_ID("arm,l220-cache", of_l2c220_data), + L2C_ID("arm,pl310-cache", of_l2c310_data), + L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), + L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data), + L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data), + L2C_ID("marvell,tauros3-cache", of_tauros3_data), + /* Deprecated IDs */ + L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), {} }; int __init l2x0_of_init(u32 aux_val, u32 aux_mask) { + const struct l2c_init_data *data; struct device_node *np; - const struct l2x0_of_data *data; struct resource res; + u32 cache_id, old_aux; np = of_find_matching_node(NULL, l2x0_ids); if (!np) @@ -989,23 +1487,29 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; - /* L2 configuration can only be changed if the cache is disabled */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - if (data->setup) - data->setup(np, &aux_val, &aux_mask); - - /* For aurora cache in no outer mode select the - * correct mode using the coprocessor*/ - if (data == &aurora_no_outer_data) - aurora_broadcast_l2_commands(); + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (old_aux != ((old_aux & aux_mask) | aux_val)) { + pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, (old_aux & aux_mask) | aux_val); + } else if (aux_mask != ~0U && aux_val != 0) { + pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n"); } - if (data->save) - data->save(); + /* All L2 caches are unified, so this property should be specified */ + if (!of_property_read_bool(np, "cache-unified")) + pr_err("L2C: device tree omits to specify unified cache\n"); + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + if (data->of_parse) + data->of_parse(np, &aux_val, &aux_mask); + + if (cache_id_part_number_from_dt) + cache_id = cache_id_part_number_from_dt; + else + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - of_init = true; - memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); - l2x0_init(l2x0_base, aux_val, aux_mask); + __l2c_init(data, aux_val, aux_mask, cache_id); return 0; } diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 778bcf88ee79..615c99e38ba1 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -59,7 +59,7 @@ ENTRY(v7_invalidate_l1) bgt 2b cmp r2, #0 bgt 1b - dsb + dsb st isb mov pc, lr ENDPROC(v7_invalidate_l1) @@ -166,7 +166,7 @@ skip: finished: mov r10, #0 @ swith back to cache level 0 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - dsb + dsb st isb mov pc, lr ENDPROC(v7_flush_dcache_all) @@ -335,7 +335,7 @@ ENTRY(v7_flush_kern_dcache_area) add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_flush_kern_dcache_area) @@ -368,7 +368,7 @@ v7_dma_inv_range: add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_inv_range) @@ -390,7 +390,7 @@ v7_dma_clean_range: add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_clean_range) @@ -412,7 +412,7 @@ ENTRY(v7_dma_flush_range) add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_flush_range) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 6b00be1f971e..4c88935654ca 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -390,7 +390,7 @@ static int __init atomic_pool_init(void) if (!pages) goto no_pages; - if (IS_ENABLED(CONFIG_DMA_CMA)) + if (dev_get_cma_area(NULL)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else @@ -701,7 +701,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, addr = __alloc_simple_buffer(dev, size, gfp, &page); else if (!(gfp & __GFP_WAIT)) addr = __alloc_from_pool(size, &page); - else if (!IS_ENABLED(CONFIG_DMA_CMA)) + else if (!dev_get_cma_area(dev)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); else addr = __alloc_from_contiguous(dev, size, prot, &page, caller); @@ -790,7 +790,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, __dma_free_buffer(page, size); } else if (__free_from_pool(cpu_addr, size)) { return; - } else if (!IS_ENABLED(CONFIG_DMA_CMA)) { + } else if (!dev_get_cma_area(dev)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { @@ -885,7 +885,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, static void __dma_page_cpu_to_dev(struct page *page, unsigned long off, size_t size, enum dma_data_direction dir) { - unsigned long paddr; + phys_addr_t paddr; dma_cache_maint_page(page, off, size, dir, dmac_map_area); @@ -901,14 +901,15 @@ static void __dma_page_cpu_to_dev(struct page *page, unsigned long off, static void __dma_page_dev_to_cpu(struct page *page, unsigned long off, size_t size, enum dma_data_direction dir) { - unsigned long paddr = page_to_phys(page) + off; + phys_addr_t paddr = page_to_phys(page) + off; /* FIXME: non-speculating: not required */ - /* don't bother invalidating if DMA to device */ - if (dir != DMA_TO_DEVICE) + /* in any case, don't bother invalidating if DMA to device */ + if (dir != DMA_TO_DEVICE) { outer_inv_range(paddr, paddr + size); - dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + } /* * Mark the D-cache clean for these pages to avoid extra flushing. @@ -1074,6 +1075,7 @@ static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping, unsigned int order = get_order(size); unsigned int align = 0; unsigned int count, start; + size_t mapping_size = mapping->bits << PAGE_SHIFT; unsigned long flags; dma_addr_t iova; int i; @@ -1119,7 +1121,7 @@ static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping, } spin_unlock_irqrestore(&mapping->lock, flags); - iova = mapping->base + (mapping->size * i); + iova = mapping->base + (mapping_size * i); iova += start << PAGE_SHIFT; return iova; @@ -1129,6 +1131,7 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, dma_addr_t addr, size_t size) { unsigned int start, count; + size_t mapping_size = mapping->bits << PAGE_SHIFT; unsigned long flags; dma_addr_t bitmap_base; u32 bitmap_index; @@ -1136,14 +1139,14 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, if (!size) return; - bitmap_index = (u32) (addr - mapping->base) / (u32) mapping->size; + bitmap_index = (u32) (addr - mapping->base) / (u32) mapping_size; BUG_ON(addr < mapping->base || bitmap_index > mapping->extensions); - bitmap_base = mapping->base + mapping->size * bitmap_index; + bitmap_base = mapping->base + mapping_size * bitmap_index; start = (addr - bitmap_base) >> PAGE_SHIFT; - if (addr + size > bitmap_base + mapping->size) { + if (addr + size > bitmap_base + mapping_size) { /* * The address range to be freed reaches into the iova * range of the next bitmap. This should not happen as @@ -1964,7 +1967,6 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) mapping->extensions = extensions; mapping->base = base; mapping->bits = BITS_PER_BYTE * bitmap_size; - mapping->size = mapping->bits << PAGE_SHIFT; spin_lock_init(&mapping->lock); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 3387e60e4ea3..43d54f5b26b9 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -104,17 +104,20 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig #define flush_icache_alias(pfn,vaddr,len) do { } while (0) #endif +#define FLAG_PA_IS_EXEC 1 +#define FLAG_PA_CORE_IN_MM 2 + static void flush_ptrace_access_other(void *args) { __flush_icache_all(); } -static -void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *kaddr, unsigned long len) +static inline +void __flush_ptrace_access(struct page *page, unsigned long uaddr, void *kaddr, + unsigned long len, unsigned int flags) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { + if (flags & FLAG_PA_CORE_IN_MM) { unsigned long addr = (unsigned long)kaddr; __cpuc_coherent_kern_range(addr, addr + len); } @@ -128,7 +131,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, } /* VIPT non-aliasing D-cache */ - if (vma->vm_flags & VM_EXEC) { + if (flags & FLAG_PA_IS_EXEC) { unsigned long addr = (unsigned long)kaddr; if (icache_is_vipt_aliasing()) flush_icache_alias(page_to_pfn(page), uaddr, len); @@ -140,6 +143,26 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, } } +static +void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, + unsigned long uaddr, void *kaddr, unsigned long len) +{ + unsigned int flags = 0; + if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) + flags |= FLAG_PA_CORE_IN_MM; + if (vma->vm_flags & VM_EXEC) + flags |= FLAG_PA_IS_EXEC; + __flush_ptrace_access(page, uaddr, kaddr, len, flags); +} + +void flush_uprobe_xol_access(struct page *page, unsigned long uaddr, + void *kaddr, unsigned long len) +{ + unsigned int flags = FLAG_PA_CORE_IN_MM|FLAG_PA_IS_EXEC; + + __flush_ptrace_access(page, uaddr, kaddr, len, flags); +} + /* * Copy user data from/to a page which is mapped into a different * processes address space. Really, we want to allow our "user diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 21b9e1bf9b77..45aeaaca9052 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -18,6 +18,21 @@ #include <asm/tlbflush.h> #include "mm.h" +pte_t *fixmap_page_table; + +static inline void set_fixmap_pte(int idx, pte_t pte) +{ + unsigned long vaddr = __fix_to_virt(idx); + set_pte_ext(fixmap_page_table + idx, pte, 0); + local_flush_tlb_kernel_page(vaddr); +} + +static inline pte_t get_fixmap_pte(unsigned long vaddr) +{ + unsigned long idx = __virt_to_fix(vaddr); + return *(fixmap_page_table + idx); +} + void *kmap(struct page *page) { might_sleep(); @@ -63,20 +78,20 @@ void *kmap_atomic(struct page *page) type = kmap_atomic_idx_push(); idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + vaddr = __fix_to_virt(idx); #ifdef CONFIG_DEBUG_HIGHMEM /* * With debugging enabled, kunmap_atomic forces that entry to 0. * Make sure it was indeed properly unmapped. */ - BUG_ON(!pte_none(get_top_pte(vaddr))); + BUG_ON(!pte_none(*(fixmap_page_table + idx))); #endif /* * When debugging is off, kunmap_atomic leaves the previous mapping * in place, so the contained TLB flush ensures the TLB is updated * with the new mapping. */ - set_top_pte(vaddr, mk_pte(page, kmap_prot)); + set_fixmap_pte(idx, mk_pte(page, kmap_prot)); return (void *)vaddr; } @@ -94,8 +109,8 @@ void __kunmap_atomic(void *kvaddr) if (cache_is_vivt()) __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); #ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); - set_top_pte(vaddr, __pte(0)); + BUG_ON(vaddr != __fix_to_virt(idx)); + set_fixmap_pte(idx, __pte(0)); #else (void) idx; /* to kill a warning */ #endif @@ -117,11 +132,11 @@ void *kmap_atomic_pfn(unsigned long pfn) type = kmap_atomic_idx_push(); idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + vaddr = __fix_to_virt(idx); #ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(get_top_pte(vaddr))); + BUG_ON(!pte_none(*(fixmap_page_table + idx))); #endif - set_top_pte(vaddr, pfn_pte(pfn, kmap_prot)); + set_fixmap_pte(idx, pfn_pte(pfn, kmap_prot)); return (void *)vaddr; } @@ -133,5 +148,5 @@ struct page *kmap_atomic_to_page(const void *ptr) if (vaddr < FIXADDR_START) return virt_to_page(ptr); - return pte_page(get_top_pte(vaddr)); + return pte_page(get_fixmap_pte(vaddr)); } diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c index 54ee6163c181..66781bf34077 100644 --- a/arch/arm/mm/hugetlbpage.c +++ b/arch/arm/mm/hugetlbpage.c @@ -56,8 +56,3 @@ int pmd_huge(pmd_t pmd) { return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT); } - -int pmd_huge_support(void) -{ - return 1; -} diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2a77ba8796ae..659c75d808dc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -23,6 +23,7 @@ #include <linux/dma-contiguous.h> #include <linux/sizes.h> +#include <asm/cp15.h> #include <asm/mach-types.h> #include <asm/memblock.h> #include <asm/prom.h> @@ -36,6 +37,14 @@ #include "mm.h" +#ifdef CONFIG_CPU_CP15_MMU +unsigned long __init __clear_cr(unsigned long mask) +{ + cr_alignment = cr_alignment & ~mask; + return cr_alignment; +} +#endif + static phys_addr_t phys_initrd_start __initdata = 0; static unsigned long phys_initrd_size __initdata = 0; @@ -81,24 +90,21 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2); * initialization functions, as well as show_mem() for the skipping * of holes in the memory map. It is populated by arm_add_memory(). */ -struct meminfo meminfo; - void show_mem(unsigned int filter) { int free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0, slab = 0, i; - struct meminfo * mi = &meminfo; + int shared = 0, cached = 0, slab = 0; + struct memblock_region *reg; printk("Mem-info:\n"); show_free_areas(filter); - for_each_bank (i, mi) { - struct membank *bank = &mi->bank[i]; + for_each_memblock (memory, reg) { unsigned int pfn1, pfn2; struct page *page, *end; - pfn1 = bank_pfn_start(bank); - pfn2 = bank_pfn_end(bank); + pfn1 = memblock_region_memory_base_pfn(reg); + pfn2 = memblock_region_memory_end_pfn(reg); page = pfn_to_page(pfn1); end = pfn_to_page(pfn2 - 1) + 1; @@ -115,8 +121,9 @@ void show_mem(unsigned int filter) free++; else shared += page_count(page) - 1; - page++; - } while (page < end); + pfn1++; + page = pfn_to_page(pfn1); + } while (pfn1 < pfn2); } printk("%d pages of RAM\n", total); @@ -130,16 +137,9 @@ void show_mem(unsigned int filter) static void __init find_limits(unsigned long *min, unsigned long *max_low, unsigned long *max_high) { - struct meminfo *mi = &meminfo; - int i; - - /* This assumes the meminfo array is properly sorted */ - *min = bank_pfn_start(&mi->bank[0]); - for_each_bank (i, mi) - if (mi->bank[i].highmem) - break; - *max_low = bank_pfn_end(&mi->bank[i - 1]); - *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]); + *max_low = PFN_DOWN(memblock_get_current_limit()); + *min = PFN_UP(memblock_start_of_DRAM()); + *max_high = PFN_DOWN(memblock_end_of_DRAM()); } #ifdef CONFIG_ZONE_DMA @@ -274,14 +274,8 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) return phys; } -void __init arm_memblock_init(struct meminfo *mi, - const struct machine_desc *mdesc) +void __init arm_memblock_init(const struct machine_desc *mdesc) { - int i; - - for (i = 0; i < mi->nr_banks; i++) - memblock_add(mi->bank[i].start, mi->bank[i].size); - /* Register the kernel text, kernel data and initrd with memblock. */ #ifdef CONFIG_XIP_KERNEL memblock_reserve(__pa(_sdata), _end - _sdata); @@ -317,7 +311,6 @@ void __init arm_memblock_init(struct meminfo *mi, #endif arm_mm_memblock_reserve(); - arm_dt_memblock_reserve(); /* reserve any platform specific memblock areas */ if (mdesc->reserve) @@ -413,54 +406,53 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn) /* * The mem_map array can get very big. Free the unused area of the memory map. */ -static void __init free_unused_memmap(struct meminfo *mi) +static void __init free_unused_memmap(void) { - unsigned long bank_start, prev_bank_end = 0; - unsigned int i; + unsigned long start, prev_end = 0; + struct memblock_region *reg; /* * This relies on each bank being in address order. * The banks are sorted previously in bootmem_init(). */ - for_each_bank(i, mi) { - struct membank *bank = &mi->bank[i]; - - bank_start = bank_pfn_start(bank); + for_each_memblock(memory, reg) { + start = memblock_region_memory_base_pfn(reg); #ifdef CONFIG_SPARSEMEM /* * Take care not to free memmap entries that don't exist * due to SPARSEMEM sections which aren't present. */ - bank_start = min(bank_start, - ALIGN(prev_bank_end, PAGES_PER_SECTION)); + start = min(start, + ALIGN(prev_end, PAGES_PER_SECTION)); #else /* * Align down here since the VM subsystem insists that the * memmap entries are valid from the bank start aligned to * MAX_ORDER_NR_PAGES. */ - bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES); + start = round_down(start, MAX_ORDER_NR_PAGES); #endif /* * If we had a previous bank, and there is a space * between the current bank and the previous, free it. */ - if (prev_bank_end && prev_bank_end < bank_start) - free_memmap(prev_bank_end, bank_start); + if (prev_end && prev_end < start) + free_memmap(prev_end, start); /* * Align up here since the VM subsystem insists that the * memmap entries are valid from the bank end aligned to * MAX_ORDER_NR_PAGES. */ - prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES); + prev_end = ALIGN(memblock_region_memory_end_pfn(reg), + MAX_ORDER_NR_PAGES); } #ifdef CONFIG_SPARSEMEM - if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION)) - free_memmap(prev_bank_end, - ALIGN(prev_bank_end, PAGES_PER_SECTION)); + if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) + free_memmap(prev_end, + ALIGN(prev_end, PAGES_PER_SECTION)); #endif } @@ -536,7 +528,7 @@ void __init mem_init(void) set_max_mapnr(pfn_to_page(max_pfn) - mem_map); /* this will put all unused low memory onto the freelists */ - free_unused_memmap(&meminfo); + free_unused_memmap(); free_all_bootmem(); #ifdef CONFIG_SA1111 diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index f9c32ba73544..d1e5ad7ab3bc 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -438,6 +438,13 @@ void __arm_iounmap(volatile void __iomem *io_addr) EXPORT_SYMBOL(__arm_iounmap); #ifdef CONFIG_PCI +static int pci_ioremap_mem_type = MT_DEVICE; + +void pci_ioremap_set_mem_type(int mem_type) +{ + pci_ioremap_mem_type = mem_type; +} + int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) { BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT); @@ -445,7 +452,7 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) return ioremap_page_range(PCI_IO_VIRT_BASE + offset, PCI_IO_VIRT_BASE + offset + SZ_64K, phys_addr, - __pgprot(get_mem_type(MT_DEVICE)->prot_pte)); + __pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte)); } EXPORT_SYMBOL_GPL(pci_ioremap_io); #endif diff --git a/arch/arm/mm/l2c-common.c b/arch/arm/mm/l2c-common.c new file mode 100644 index 000000000000..10a3cf28c362 --- /dev/null +++ b/arch/arm/mm/l2c-common.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2010 ARM Ltd. + * Written by Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/bug.h> +#include <linux/smp.h> +#include <asm/outercache.h> + +void outer_disable(void) +{ + WARN_ON(!irqs_disabled()); + WARN_ON(num_online_cpus() > 1); + + if (outer_cache.disable) + outer_cache.disable(); +} diff --git a/arch/arm/mm/l2c-l2x0-resume.S b/arch/arm/mm/l2c-l2x0-resume.S new file mode 100644 index 000000000000..99b05f21a59a --- /dev/null +++ b/arch/arm/mm/l2c-l2x0-resume.S @@ -0,0 +1,58 @@ +/* + * L2C-310 early resume code. This can be used by platforms to restore + * the settings of their L2 cache controller before restoring the + * processor state. + * + * This code can only be used to if you are running in the secure world. + */ +#include <linux/linkage.h> +#include <asm/hardware/cache-l2x0.h> + + .text + +ENTRY(l2c310_early_resume) + adr r0, 1f + ldr r2, [r0] + add r0, r2, r0 + + ldmia r0, {r1, r2, r3, r4, r5, r6, r7, r8} + @ r1 = phys address of L2C-310 controller + @ r2 = aux_ctrl + @ r3 = tag_latency + @ r4 = data_latency + @ r5 = filter_start + @ r6 = filter_end + @ r7 = prefetch_ctrl + @ r8 = pwr_ctrl + + @ Check that the address has been initialised + teq r1, #0 + moveq pc, lr + + @ The prefetch and power control registers are revision dependent + @ and can be written whether or not the L2 cache is enabled + ldr r0, [r1, #L2X0_CACHE_ID] + and r0, r0, #L2X0_CACHE_ID_RTL_MASK + cmp r0, #L310_CACHE_ID_RTL_R2P0 + strcs r7, [r1, #L310_PREFETCH_CTRL] + cmp r0, #L310_CACHE_ID_RTL_R3P0 + strcs r8, [r1, #L310_POWER_CTRL] + + @ Don't setup the L2 cache if it is already enabled + ldr r0, [r1, #L2X0_CTRL] + tst r0, #L2X0_CTRL_EN + movne pc, lr + + str r3, [r1, #L310_TAG_LATENCY_CTRL] + str r4, [r1, #L310_DATA_LATENCY_CTRL] + str r6, [r1, #L310_ADDR_FILTER_END] + str r5, [r1, #L310_ADDR_FILTER_START] + + str r2, [r1, #L2X0_AUX_CTRL] + mov r9, #L2X0_CTRL_EN + str r9, [r1, #L2X0_CTRL] + mov pc, lr +ENDPROC(l2c310_early_resume) + + .align +1: .long l2x0_saved_regs - . diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 7ea641b7aa7d..ce727d47275c 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -2,6 +2,8 @@ #include <linux/list.h> #include <linux/vmalloc.h> +#include <asm/pgtable.h> + /* the upper-most page table pointer */ extern pmd_t *top_pmd; @@ -93,3 +95,5 @@ extern phys_addr_t arm_lowmem_limit; void __init bootmem_init(void); void arm_mm_memblock_reserve(void); void dma_contiguous_remap(void); + +unsigned long __clear_cr(unsigned long mask); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b68c6b22e1c8..ab14b79b03f0 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -35,6 +35,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/pci.h> +#include <asm/fixmap.h> #include "mm.h" #include "tcm.h" @@ -117,28 +118,54 @@ static struct cachepolicy cache_policies[] __initdata = { }; #ifdef CONFIG_CPU_CP15 +static unsigned long initial_pmd_value __initdata = 0; + /* - * These are useful for identifying cache coherency - * problems by allowing the cache or the cache and - * writebuffer to be turned off. (Note: the write - * buffer should not be on and the cache off). + * Initialise the cache_policy variable with the initial state specified + * via the "pmd" value. This is used to ensure that on ARMv6 and later, + * the C code sets the page tables up with the same policy as the head + * assembly code, which avoids an illegal state where the TLBs can get + * confused. See comments in early_cachepolicy() for more information. */ -static int __init early_cachepolicy(char *p) +void __init init_default_cache_policy(unsigned long pmd) { int i; + initial_pmd_value = pmd; + + pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE; + + for (i = 0; i < ARRAY_SIZE(cache_policies); i++) + if (cache_policies[i].pmd == pmd) { + cachepolicy = i; + break; + } + + if (i == ARRAY_SIZE(cache_policies)) + pr_err("ERROR: could not find cache policy\n"); +} + +/* + * These are useful for identifying cache coherency problems by allowing + * the cache or the cache and writebuffer to be turned off. (Note: the + * write buffer should not be on and the cache off). + */ +static int __init early_cachepolicy(char *p) +{ + int i, selected = -1; + for (i = 0; i < ARRAY_SIZE(cache_policies); i++) { int len = strlen(cache_policies[i].policy); if (memcmp(p, cache_policies[i].policy, len) == 0) { - cachepolicy = i; - cr_alignment &= ~cache_policies[i].cr_mask; - cr_no_alignment &= ~cache_policies[i].cr_mask; + selected = i; break; } } - if (i == ARRAY_SIZE(cache_policies)) - printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + + if (selected == -1) + pr_err("ERROR: unknown or unsupported cache policy\n"); + /* * This restriction is partly to do with the way we boot; it is * unpredictable to have memory mapped using two different sets of @@ -146,12 +173,18 @@ static int __init early_cachepolicy(char *p) * change these attributes once the initial assembly has setup the * page tables. */ - if (cpu_architecture() >= CPU_ARCH_ARMv6) { - printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); - cachepolicy = CPOLICY_WRITEBACK; + if (cpu_architecture() >= CPU_ARCH_ARMv6 && selected != cachepolicy) { + pr_warn("Only cachepolicy=%s supported on ARMv6 and later\n", + cache_policies[cachepolicy].policy); + return 0; + } + + if (selected != cachepolicy) { + unsigned long cr = __clear_cr(cache_policies[selected].cr_mask); + cachepolicy = selected; + flush_cache_all(); + set_cr(cr); } - flush_cache_all(); - set_cr(cr_alignment); return 0; } early_param("cachepolicy", early_cachepolicy); @@ -186,35 +219,6 @@ static int __init early_ecc(char *p) early_param("ecc", early_ecc); #endif -static int __init noalign_setup(char *__unused) -{ - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); - return 1; -} -__setup("noalign", noalign_setup); - -#ifndef CONFIG_SMP -void adjust_cr(unsigned long mask, unsigned long set) -{ - unsigned long flags; - - mask &= ~CR_A; - - set &= mask; - - local_irq_save(flags); - - cr_no_alignment = (cr_no_alignment & ~mask) | set; - cr_alignment = (cr_alignment & ~mask) | set; - - set_cr((get_cr() & ~mask) | set); - - local_irq_restore(flags); -} -#endif - #else /* ifdef CONFIG_CPU_CP15 */ static int __init early_cachepolicy(char *p) @@ -414,8 +418,17 @@ static void __init build_mem_type_table(void) cachepolicy = CPOLICY_WRITEBACK; ecc_mask = 0; } - if (is_smp()) - cachepolicy = CPOLICY_WRITEALLOC; + + if (is_smp()) { + if (cachepolicy != CPOLICY_WRITEALLOC) { + pr_warn("Forcing write-allocate cache policy for SMP\n"); + cachepolicy = CPOLICY_WRITEALLOC; + } + if (!(initial_pmd_value & PMD_SECT_S)) { + pr_warn("Forcing shared mappings for SMP\n"); + initial_pmd_value |= PMD_SECT_S; + } + } /* * Strip out features not present on earlier architectures. @@ -539,11 +552,12 @@ static void __init build_mem_type_table(void) mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; #endif - if (is_smp()) { - /* - * Mark memory with the "shared" attribute - * for SMP systems - */ + /* + * If the initial page tables were created with the S bit + * set, then we need to do the same here for the same + * reasons given in early_cachepolicy(). + */ + if (initial_pmd_value & PMD_SECT_S) { user_pgprot |= L_PTE_SHARED; kern_pgprot |= L_PTE_SHARED; vecs_pgprot |= L_PTE_SHARED; @@ -1061,74 +1075,47 @@ phys_addr_t arm_lowmem_limit __initdata = 0; void __init sanity_check_meminfo(void) { phys_addr_t memblock_limit = 0; - int i, j, highmem = 0; + int highmem = 0; phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; + struct memblock_region *reg; - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { - struct membank *bank = &meminfo.bank[j]; - phys_addr_t size_limit; - - *bank = meminfo.bank[i]; - size_limit = bank->size; + for_each_memblock(memory, reg) { + phys_addr_t block_start = reg->base; + phys_addr_t block_end = reg->base + reg->size; + phys_addr_t size_limit = reg->size; - if (bank->start >= vmalloc_limit) + if (reg->base >= vmalloc_limit) highmem = 1; else - size_limit = vmalloc_limit - bank->start; + size_limit = vmalloc_limit - reg->base; - bank->highmem = highmem; -#ifdef CONFIG_HIGHMEM - /* - * Split those memory banks which are partially overlapping - * the vmalloc area greatly simplifying things later. - */ - if (!highmem && bank->size > size_limit) { - if (meminfo.nr_banks >= NR_BANKS) { - printk(KERN_CRIT "NR_BANKS too low, " - "ignoring high memory\n"); - } else { - memmove(bank + 1, bank, - (meminfo.nr_banks - i) * sizeof(*bank)); - meminfo.nr_banks++; - i++; - bank[1].size -= size_limit; - bank[1].start = vmalloc_limit; - bank[1].highmem = highmem = 1; - j++; + if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) { + + if (highmem) { + pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n", + &block_start, &block_end); + memblock_remove(reg->base, reg->size); + continue; } - bank->size = size_limit; - } -#else - /* - * Highmem banks not allowed with !CONFIG_HIGHMEM. - */ - if (highmem) { - printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx " - "(!CONFIG_HIGHMEM).\n", - (unsigned long long)bank->start, - (unsigned long long)bank->start + bank->size - 1); - continue; - } - /* - * Check whether this memory bank would partially overlap - * the vmalloc area. - */ - if (bank->size > size_limit) { - printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " - "to -%.8llx (vmalloc region overlap).\n", - (unsigned long long)bank->start, - (unsigned long long)bank->start + bank->size - 1, - (unsigned long long)bank->start + size_limit - 1); - bank->size = size_limit; + if (reg->size > size_limit) { + phys_addr_t overlap_size = reg->size - size_limit; + + pr_notice("Truncating RAM at %pa-%pa to -%pa", + &block_start, &block_end, &vmalloc_limit); + memblock_remove(vmalloc_limit, overlap_size); + block_end = vmalloc_limit; + } } -#endif - if (!bank->highmem) { - phys_addr_t bank_end = bank->start + bank->size; - if (bank_end > arm_lowmem_limit) - arm_lowmem_limit = bank_end; + if (!highmem) { + if (block_end > arm_lowmem_limit) { + if (reg->size > size_limit) + arm_lowmem_limit = vmalloc_limit; + else + arm_lowmem_limit = block_end; + } /* * Find the first non-section-aligned page, and point @@ -1144,35 +1131,15 @@ void __init sanity_check_meminfo(void) * occurs before any free memory is mapped. */ if (!memblock_limit) { - if (!IS_ALIGNED(bank->start, SECTION_SIZE)) - memblock_limit = bank->start; - else if (!IS_ALIGNED(bank_end, SECTION_SIZE)) - memblock_limit = bank_end; + if (!IS_ALIGNED(block_start, SECTION_SIZE)) + memblock_limit = block_start; + else if (!IS_ALIGNED(block_end, SECTION_SIZE)) + memblock_limit = arm_lowmem_limit; } - } - j++; - } -#ifdef CONFIG_HIGHMEM - if (highmem) { - const char *reason = NULL; - if (cache_is_vipt_aliasing()) { - /* - * Interactions between kmap and other mappings - * make highmem support with aliasing VIPT caches - * rather difficult. - */ - reason = "with VIPT aliasing cache"; - } - if (reason) { - printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n", - reason); - while (j > 0 && meminfo.bank[j - 1].highmem) - j--; } } -#endif - meminfo.nr_banks = j; + high_memory = __va(arm_lowmem_limit - 1) + 1; /* @@ -1359,6 +1326,9 @@ static void __init kmap_init(void) #ifdef CONFIG_HIGHMEM pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE), PKMAP_BASE, _PAGE_KERNEL_TABLE); + + fixmap_page_table = early_pte_alloc(pmd_off_k(FIXADDR_START), + FIXADDR_START, _PAGE_KERNEL_TABLE); #endif } @@ -1461,7 +1431,7 @@ void __init early_paging_init(const struct machine_desc *mdesc, * just complicate the code. */ flush_cache_louis(); - dsb(); + dsb(ishst); isb(); /* remap level 1 table */ diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 55764a7ef1f0..da1874f9f8cf 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -88,30 +88,35 @@ static unsigned long irbar_read(void) void __init sanity_check_meminfo_mpu(void) { int i; - struct membank *bank = meminfo.bank; phys_addr_t phys_offset = PHYS_OFFSET; phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size; - - /* Initially only use memory continuous from PHYS_OFFSET */ - if (bank_phys_start(&bank[0]) != phys_offset) - panic("First memory bank must be contiguous from PHYS_OFFSET"); - - /* Banks have already been sorted by start address */ - for (i = 1; i < meminfo.nr_banks; i++) { - if (bank[i].start <= bank_phys_end(&bank[0]) && - bank_phys_end(&bank[i]) > bank_phys_end(&bank[0])) { - bank[0].size = bank_phys_end(&bank[i]) - bank[0].start; + struct memblock_region *reg; + bool first = true; + phys_addr_t mem_start; + phys_addr_t mem_end; + + for_each_memblock(memory, reg) { + if (first) { + /* + * Initially only use memory continuous from + * PHYS_OFFSET */ + if (reg->base != phys_offset) + panic("First memory bank must be contiguous from PHYS_OFFSET"); + + mem_start = reg->base; + mem_end = reg->base + reg->size; + specified_mem_size = reg->size; + first = false; } else { - pr_notice("Ignoring RAM after 0x%.8lx. " - "First non-contiguous (ignored) bank start: 0x%.8lx\n", - (unsigned long)bank_phys_end(&bank[0]), - (unsigned long)bank_phys_start(&bank[i])); - break; + /* + * memblock auto merges contiguous blocks, remove + * all blocks afterwards + */ + pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n", + &mem_start, ®->base); + memblock_remove(reg->base, reg->size); } } - /* All contiguous banks are now merged in to the first bank */ - meminfo.nr_banks = 1; - specified_mem_size = bank[0].size; /* * MPU has curious alignment requirements: Size must be power of 2, and @@ -128,23 +133,24 @@ void __init sanity_check_meminfo_mpu(void) */ aligned_region_size = (phys_offset - 1) ^ (phys_offset); /* Find the max power-of-two sized region that fits inside our bank */ - rounded_mem_size = (1 << __fls(bank[0].size)) - 1; + rounded_mem_size = (1 << __fls(specified_mem_size)) - 1; /* The actual region size is the smaller of the two */ aligned_region_size = aligned_region_size < rounded_mem_size ? aligned_region_size + 1 : rounded_mem_size + 1; - if (aligned_region_size != specified_mem_size) - pr_warn("Truncating memory from 0x%.8lx to 0x%.8lx (MPU region constraints)", - (unsigned long)specified_mem_size, - (unsigned long)aligned_region_size); + if (aligned_region_size != specified_mem_size) { + pr_warn("Truncating memory from %pa to %pa (MPU region constraints)", + &specified_mem_size, &aligned_region_size); + memblock_remove(mem_start + aligned_region_size, + specified_mem_size - aligned_round_size); + + mem_end = mem_start + aligned_region_size; + } - meminfo.bank[0].size = aligned_region_size; - pr_debug("MPU Region from 0x%.8lx size 0x%.8lx (end 0x%.8lx))\n", - (unsigned long)phys_offset, - (unsigned long)aligned_region_size, - (unsigned long)bank_phys_end(&bank[0])); + pr_debug("MPU Region from %pa size %pa (end %pa))\n", + &phys_offset, &aligned_region_size, &mem_end); } @@ -292,7 +298,7 @@ void __init sanity_check_meminfo(void) { phys_addr_t end; sanity_check_meminfo_mpu(); - end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]); + end = memblock_end_of_DRAM(); high_memory = __va(end - 1) + 1; } diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 01a719e18bb0..22e3ad63500c 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -64,6 +64,14 @@ ENTRY(cpu_v7_switch_mm) mov pc, lr ENDPROC(cpu_v7_switch_mm) +#ifdef __ARMEB__ +#define rl r3 +#define rh r2 +#else +#define rl r2 +#define rh r3 +#endif + /* * cpu_v7_set_pte_ext(ptep, pte) * @@ -73,13 +81,13 @@ ENDPROC(cpu_v7_switch_mm) */ ENTRY(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU - tst r2, #L_PTE_VALID + tst rl, #L_PTE_VALID beq 1f - tst r3, #1 << (57 - 32) @ L_PTE_NONE - bicne r2, #L_PTE_VALID + tst rh, #1 << (57 - 32) @ L_PTE_NONE + bicne rl, #L_PTE_VALID bne 1f - tst r3, #1 << (55 - 32) @ L_PTE_DIRTY - orreq r2, #L_PTE_RDONLY + tst rh, #1 << (55 - 32) @ L_PTE_DIRTY + orreq rl, #L_PTE_RDONLY 1: strd r2, r3, [r0] ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 195731d3813b..3db2c2f04a30 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -169,9 +169,31 @@ ENDPROC(cpu_pj4b_do_idle) globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle #endif globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area - globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend - globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume - globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size +#ifdef CONFIG_ARM_CPU_SUSPEND +ENTRY(cpu_pj4b_do_suspend) + stmfd sp!, {r6 - r10} + mrc p15, 1, r6, c15, c1, 0 @ save CP15 - extra features + mrc p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 + mrc p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2 + mrc p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1 + mrc p15, 0, r10, c9, c14, 0 @ save CP15 - PMC + stmia r0!, {r6 - r10} + ldmfd sp!, {r6 - r10} + b cpu_v7_do_suspend +ENDPROC(cpu_pj4b_do_suspend) + +ENTRY(cpu_pj4b_do_resume) + ldmia r0!, {r6 - r10} + mcr p15, 1, r6, c15, c1, 0 @ save CP15 - extra features + mcr p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 + mcr p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2 + mcr p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1 + mcr p15, 0, r10, c9, c14, 0 @ save CP15 - PMC + b cpu_v7_do_resume +ENDPROC(cpu_pj4b_do_resume) +#endif +.globl cpu_pj4b_suspend_size +.equ cpu_pj4b_suspend_size, 4 * 14 #endif @@ -194,6 +216,7 @@ __v7_cr7mp_setup: __v7_ca7mp_setup: __v7_ca12mp_setup: __v7_ca15mp_setup: +__v7_ca17mp_setup: mov r10, #0 1: #ifdef CONFIG_SMP @@ -505,6 +528,16 @@ __v7_ca15mp_proc_info: .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* + * ARM Ltd. Cortex A17 processor. + */ + .type __v7_ca17mp_proc_info, #object +__v7_ca17mp_proc_info: + .long 0x410fc0e0 + .long 0xff0ffff0 + __v7_proc __v7_ca17mp_setup + .size __v7_ca17mp_proc_info, . - __v7_ca17mp_proc_info + + /* * Qualcomm Inc. Krait processors. */ .type __krait_proc_info, #object diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 0c93588fcb91..1ca37c72f12f 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -123,6 +123,11 @@ __v7m_setup: mov pc, lr ENDPROC(__v7m_setup) + .align 2 +__v7m_setup_stack: + .space 4 * 8 @ 8 registers +__v7m_setup_stack_top: + define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" @@ -152,6 +157,3 @@ __v7m_proc_info: .long nop_cache_fns @ proc_info_list.cache .size __v7m_proc_info, . - __v7m_proc_info -__v7m_setup_stack: - .space 4 * 8 @ 8 registers -__v7m_setup_stack_top: diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 6f879c319a9d..fb5503ce016f 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -136,7 +136,7 @@ static u16 saved_regs(struct jit_ctx *ctx) u16 ret = 0; if ((ctx->skf->len > 1) || - (ctx->skf->insns[0].code == BPF_S_RET_A)) + (ctx->skf->insns[0].code == (BPF_RET | BPF_A))) ret |= 1 << r_A; #ifdef CONFIG_FRAME_POINTER @@ -164,18 +164,10 @@ static inline int mem_words_used(struct jit_ctx *ctx) static inline bool is_load_to_a(u16 inst) { switch (inst) { - case BPF_S_LD_W_LEN: - case BPF_S_LD_W_ABS: - case BPF_S_LD_H_ABS: - case BPF_S_LD_B_ABS: - case BPF_S_ANC_CPU: - case BPF_S_ANC_IFINDEX: - case BPF_S_ANC_MARK: - case BPF_S_ANC_PROTOCOL: - case BPF_S_ANC_RXHASH: - case BPF_S_ANC_VLAN_TAG: - case BPF_S_ANC_VLAN_TAG_PRESENT: - case BPF_S_ANC_QUEUE: + case BPF_LD | BPF_W | BPF_LEN: + case BPF_LD | BPF_W | BPF_ABS: + case BPF_LD | BPF_H | BPF_ABS: + case BPF_LD | BPF_B | BPF_ABS: return true; default: return false; @@ -215,7 +207,7 @@ static void build_prologue(struct jit_ctx *ctx) emit(ARM_MOV_I(r_X, 0), ctx); /* do not leak kernel data to userspace */ - if ((first_inst != BPF_S_RET_K) && !(is_load_to_a(first_inst))) + if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst))) emit(ARM_MOV_I(r_A, 0), ctx); /* stack space for the BPF_MEM words */ @@ -480,36 +472,39 @@ static int build_body(struct jit_ctx *ctx) u32 k; for (i = 0; i < prog->len; i++) { + u16 code; + inst = &(prog->insns[i]); /* K as an immediate value operand */ k = inst->k; + code = bpf_anc_helper(inst); /* compute offsets only in the fake pass */ if (ctx->target == NULL) ctx->offsets[i] = ctx->idx * 4; - switch (inst->code) { - case BPF_S_LD_IMM: + switch (code) { + case BPF_LD | BPF_IMM: emit_mov_i(r_A, k, ctx); break; - case BPF_S_LD_W_LEN: + case BPF_LD | BPF_W | BPF_LEN: ctx->seen |= SEEN_SKB; BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4); emit(ARM_LDR_I(r_A, r_skb, offsetof(struct sk_buff, len)), ctx); break; - case BPF_S_LD_MEM: + case BPF_LD | BPF_MEM: /* A = scratch[k] */ ctx->seen |= SEEN_MEM_WORD(k); emit(ARM_LDR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx); break; - case BPF_S_LD_W_ABS: + case BPF_LD | BPF_W | BPF_ABS: load_order = 2; goto load; - case BPF_S_LD_H_ABS: + case BPF_LD | BPF_H | BPF_ABS: load_order = 1; goto load; - case BPF_S_LD_B_ABS: + case BPF_LD | BPF_B | BPF_ABS: load_order = 0; load: /* the interpreter will deal with the negative K */ @@ -552,31 +547,31 @@ load_common: emit_err_ret(ARM_COND_NE, ctx); emit(ARM_MOV_R(r_A, ARM_R0), ctx); break; - case BPF_S_LD_W_IND: + case BPF_LD | BPF_W | BPF_IND: load_order = 2; goto load_ind; - case BPF_S_LD_H_IND: + case BPF_LD | BPF_H | BPF_IND: load_order = 1; goto load_ind; - case BPF_S_LD_B_IND: + case BPF_LD | BPF_B | BPF_IND: load_order = 0; load_ind: OP_IMM3(ARM_ADD, r_off, r_X, k, ctx); goto load_common; - case BPF_S_LDX_IMM: + case BPF_LDX | BPF_IMM: ctx->seen |= SEEN_X; emit_mov_i(r_X, k, ctx); break; - case BPF_S_LDX_W_LEN: + case BPF_LDX | BPF_W | BPF_LEN: ctx->seen |= SEEN_X | SEEN_SKB; emit(ARM_LDR_I(r_X, r_skb, offsetof(struct sk_buff, len)), ctx); break; - case BPF_S_LDX_MEM: + case BPF_LDX | BPF_MEM: ctx->seen |= SEEN_X | SEEN_MEM_WORD(k); emit(ARM_LDR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx); break; - case BPF_S_LDX_B_MSH: + case BPF_LDX | BPF_B | BPF_MSH: /* x = ((*(frame + k)) & 0xf) << 2; */ ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL; /* the interpreter should deal with the negative K */ @@ -606,113 +601,113 @@ load_ind: emit(ARM_AND_I(r_X, ARM_R0, 0x00f), ctx); emit(ARM_LSL_I(r_X, r_X, 2), ctx); break; - case BPF_S_ST: + case BPF_ST: ctx->seen |= SEEN_MEM_WORD(k); emit(ARM_STR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx); break; - case BPF_S_STX: + case BPF_STX: update_on_xread(ctx); ctx->seen |= SEEN_MEM_WORD(k); emit(ARM_STR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx); break; - case BPF_S_ALU_ADD_K: + case BPF_ALU | BPF_ADD | BPF_K: /* A += K */ OP_IMM3(ARM_ADD, r_A, r_A, k, ctx); break; - case BPF_S_ALU_ADD_X: + case BPF_ALU | BPF_ADD | BPF_X: update_on_xread(ctx); emit(ARM_ADD_R(r_A, r_A, r_X), ctx); break; - case BPF_S_ALU_SUB_K: + case BPF_ALU | BPF_SUB | BPF_K: /* A -= K */ OP_IMM3(ARM_SUB, r_A, r_A, k, ctx); break; - case BPF_S_ALU_SUB_X: + case BPF_ALU | BPF_SUB | BPF_X: update_on_xread(ctx); emit(ARM_SUB_R(r_A, r_A, r_X), ctx); break; - case BPF_S_ALU_MUL_K: + case BPF_ALU | BPF_MUL | BPF_K: /* A *= K */ emit_mov_i(r_scratch, k, ctx); emit(ARM_MUL(r_A, r_A, r_scratch), ctx); break; - case BPF_S_ALU_MUL_X: + case BPF_ALU | BPF_MUL | BPF_X: update_on_xread(ctx); emit(ARM_MUL(r_A, r_A, r_X), ctx); break; - case BPF_S_ALU_DIV_K: + case BPF_ALU | BPF_DIV | BPF_K: if (k == 1) break; emit_mov_i(r_scratch, k, ctx); emit_udiv(r_A, r_A, r_scratch, ctx); break; - case BPF_S_ALU_DIV_X: + case BPF_ALU | BPF_DIV | BPF_X: update_on_xread(ctx); emit(ARM_CMP_I(r_X, 0), ctx); emit_err_ret(ARM_COND_EQ, ctx); emit_udiv(r_A, r_A, r_X, ctx); break; - case BPF_S_ALU_OR_K: + case BPF_ALU | BPF_OR | BPF_K: /* A |= K */ OP_IMM3(ARM_ORR, r_A, r_A, k, ctx); break; - case BPF_S_ALU_OR_X: + case BPF_ALU | BPF_OR | BPF_X: update_on_xread(ctx); emit(ARM_ORR_R(r_A, r_A, r_X), ctx); break; - case BPF_S_ALU_XOR_K: + case BPF_ALU | BPF_XOR | BPF_K: /* A ^= K; */ OP_IMM3(ARM_EOR, r_A, r_A, k, ctx); break; - case BPF_S_ANC_ALU_XOR_X: - case BPF_S_ALU_XOR_X: + case BPF_ANC | SKF_AD_ALU_XOR_X: + case BPF_ALU | BPF_XOR | BPF_X: /* A ^= X */ update_on_xread(ctx); emit(ARM_EOR_R(r_A, r_A, r_X), ctx); break; - case BPF_S_ALU_AND_K: + case BPF_ALU | BPF_AND | BPF_K: /* A &= K */ OP_IMM3(ARM_AND, r_A, r_A, k, ctx); break; - case BPF_S_ALU_AND_X: + case BPF_ALU | BPF_AND | BPF_X: update_on_xread(ctx); emit(ARM_AND_R(r_A, r_A, r_X), ctx); break; - case BPF_S_ALU_LSH_K: + case BPF_ALU | BPF_LSH | BPF_K: if (unlikely(k > 31)) return -1; emit(ARM_LSL_I(r_A, r_A, k), ctx); break; - case BPF_S_ALU_LSH_X: + case BPF_ALU | BPF_LSH | BPF_X: update_on_xread(ctx); emit(ARM_LSL_R(r_A, r_A, r_X), ctx); break; - case BPF_S_ALU_RSH_K: + case BPF_ALU | BPF_RSH | BPF_K: if (unlikely(k > 31)) return -1; emit(ARM_LSR_I(r_A, r_A, k), ctx); break; - case BPF_S_ALU_RSH_X: + case BPF_ALU | BPF_RSH | BPF_X: update_on_xread(ctx); emit(ARM_LSR_R(r_A, r_A, r_X), ctx); break; - case BPF_S_ALU_NEG: + case BPF_ALU | BPF_NEG: /* A = -A */ emit(ARM_RSB_I(r_A, r_A, 0), ctx); break; - case BPF_S_JMP_JA: + case BPF_JMP | BPF_JA: /* pc += K */ emit(ARM_B(b_imm(i + k + 1, ctx)), ctx); break; - case BPF_S_JMP_JEQ_K: + case BPF_JMP | BPF_JEQ | BPF_K: /* pc += (A == K) ? pc->jt : pc->jf */ condt = ARM_COND_EQ; goto cmp_imm; - case BPF_S_JMP_JGT_K: + case BPF_JMP | BPF_JGT | BPF_K: /* pc += (A > K) ? pc->jt : pc->jf */ condt = ARM_COND_HI; goto cmp_imm; - case BPF_S_JMP_JGE_K: + case BPF_JMP | BPF_JGE | BPF_K: /* pc += (A >= K) ? pc->jt : pc->jf */ condt = ARM_COND_HS; cmp_imm: @@ -731,22 +726,22 @@ cond_jump: _emit(condt ^ 1, ARM_B(b_imm(i + inst->jf + 1, ctx)), ctx); break; - case BPF_S_JMP_JEQ_X: + case BPF_JMP | BPF_JEQ | BPF_X: /* pc += (A == X) ? pc->jt : pc->jf */ condt = ARM_COND_EQ; goto cmp_x; - case BPF_S_JMP_JGT_X: + case BPF_JMP | BPF_JGT | BPF_X: /* pc += (A > X) ? pc->jt : pc->jf */ condt = ARM_COND_HI; goto cmp_x; - case BPF_S_JMP_JGE_X: + case BPF_JMP | BPF_JGE | BPF_X: /* pc += (A >= X) ? pc->jt : pc->jf */ condt = ARM_COND_CS; cmp_x: update_on_xread(ctx); emit(ARM_CMP_R(r_A, r_X), ctx); goto cond_jump; - case BPF_S_JMP_JSET_K: + case BPF_JMP | BPF_JSET | BPF_K: /* pc += (A & K) ? pc->jt : pc->jf */ condt = ARM_COND_NE; /* not set iff all zeroes iff Z==1 iff EQ */ @@ -759,16 +754,16 @@ cmp_x: emit(ARM_TST_I(r_A, imm12), ctx); } goto cond_jump; - case BPF_S_JMP_JSET_X: + case BPF_JMP | BPF_JSET | BPF_X: /* pc += (A & X) ? pc->jt : pc->jf */ update_on_xread(ctx); condt = ARM_COND_NE; emit(ARM_TST_R(r_A, r_X), ctx); goto cond_jump; - case BPF_S_RET_A: + case BPF_RET | BPF_A: emit(ARM_MOV_R(ARM_R0, r_A), ctx); goto b_epilogue; - case BPF_S_RET_K: + case BPF_RET | BPF_K: if ((k == 0) && (ctx->ret0_fp_idx < 0)) ctx->ret0_fp_idx = i; emit_mov_i(ARM_R0, k, ctx); @@ -776,17 +771,17 @@ b_epilogue: if (i != ctx->skf->len - 1) emit(ARM_B(b_imm(prog->len, ctx)), ctx); break; - case BPF_S_MISC_TAX: + case BPF_MISC | BPF_TAX: /* X = A */ ctx->seen |= SEEN_X; emit(ARM_MOV_R(r_X, r_A), ctx); break; - case BPF_S_MISC_TXA: + case BPF_MISC | BPF_TXA: /* A = X */ update_on_xread(ctx); emit(ARM_MOV_R(r_A, r_X), ctx); break; - case BPF_S_ANC_PROTOCOL: + case BPF_ANC | SKF_AD_PROTOCOL: /* A = ntohs(skb->protocol) */ ctx->seen |= SEEN_SKB; BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, @@ -795,7 +790,7 @@ b_epilogue: emit(ARM_LDRH_I(r_scratch, r_skb, off), ctx); emit_swap16(r_A, r_scratch, ctx); break; - case BPF_S_ANC_CPU: + case BPF_ANC | SKF_AD_CPU: /* r_scratch = current_thread_info() */ OP_IMM3(ARM_BIC, r_scratch, ARM_SP, THREAD_SIZE - 1, ctx); /* A = current_thread_info()->cpu */ @@ -803,7 +798,7 @@ b_epilogue: off = offsetof(struct thread_info, cpu); emit(ARM_LDR_I(r_A, r_scratch, off), ctx); break; - case BPF_S_ANC_IFINDEX: + case BPF_ANC | SKF_AD_IFINDEX: /* A = skb->dev->ifindex */ ctx->seen |= SEEN_SKB; off = offsetof(struct sk_buff, dev); @@ -817,30 +812,30 @@ b_epilogue: off = offsetof(struct net_device, ifindex); emit(ARM_LDR_I(r_A, r_scratch, off), ctx); break; - case BPF_S_ANC_MARK: + case BPF_ANC | SKF_AD_MARK: ctx->seen |= SEEN_SKB; BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4); off = offsetof(struct sk_buff, mark); emit(ARM_LDR_I(r_A, r_skb, off), ctx); break; - case BPF_S_ANC_RXHASH: + case BPF_ANC | SKF_AD_RXHASH: ctx->seen |= SEEN_SKB; BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, hash) != 4); off = offsetof(struct sk_buff, hash); emit(ARM_LDR_I(r_A, r_skb, off), ctx); break; - case BPF_S_ANC_VLAN_TAG: - case BPF_S_ANC_VLAN_TAG_PRESENT: + case BPF_ANC | SKF_AD_VLAN_TAG: + case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT: ctx->seen |= SEEN_SKB; BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, vlan_tci) != 2); off = offsetof(struct sk_buff, vlan_tci); emit(ARM_LDRH_I(r_A, r_skb, off), ctx); - if (inst->code == BPF_S_ANC_VLAN_TAG) + if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) OP_IMM3(ARM_AND, r_A, r_A, VLAN_VID_MASK, ctx); else OP_IMM3(ARM_AND, r_A, r_A, VLAN_TAG_PRESENT, ctx); break; - case BPF_S_ANC_QUEUE: + case BPF_ANC | SKF_AD_QUEUE: ctx->seen |= SEEN_SKB; BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, queue_mapping) != 2); diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 384a776d8eb2..61b4d705c267 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -40,7 +40,7 @@ static void __iomem *sync32k_cnt_reg; static u64 notrace omap_32k_read_sched_clock(void) { - return sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0; + return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; } /** @@ -64,7 +64,7 @@ static void omap_read_persistent_clock(struct timespec *ts) spin_lock_irqsave(&read_persistent_clock_lock, flags); last_cycles = cycles; - cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0; + cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; nsecs = clocksource_cyc2ns(cycles - last_cycles, persistent_mult, persistent_shift); @@ -95,7 +95,7 @@ int __init omap_init_clocksource_32k(void __iomem *vbase) * The 'SCHEME' bits(30-31) of the revision register is used * to identify the version. */ - if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) & + if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) & OMAP2_32KSYNCNT_REV_SCHEME) sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; else diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index aa7ebc6bcd65..48b69de89a5d 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -85,12 +85,12 @@ static void dbg_led_set(struct led_classdev *cdev, struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); u16 reg; - reg = __raw_readw(&fpga->leds); + reg = readw_relaxed(&fpga->leds); if (b != LED_OFF) reg |= led->mask; else reg &= ~led->mask; - __raw_writew(reg, &fpga->leds); + writew_relaxed(reg, &fpga->leds); } static enum led_brightness dbg_led_get(struct led_classdev *cdev) @@ -98,7 +98,7 @@ static enum led_brightness dbg_led_get(struct led_classdev *cdev) struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); u16 reg; - reg = __raw_readw(&fpga->leds); + reg = readw_relaxed(&fpga->leds); return (reg & led->mask) ? LED_FULL : LED_OFF; } @@ -112,7 +112,7 @@ static int fpga_probe(struct platform_device *pdev) return -ENODEV; fpga = ioremap(iomem->start, resource_size(iomem)); - __raw_writew(0xff, &fpga->leds); + writew_relaxed(0xff, &fpga->leds); for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) { struct dbg_led *led; @@ -138,15 +138,15 @@ static int fpga_probe(struct platform_device *pdev) static int fpga_suspend_noirq(struct device *dev) { - fpga_led_state = __raw_readw(&fpga->leds); - __raw_writew(0xff, &fpga->leds); + fpga_led_state = readw_relaxed(&fpga->leds); + writew_relaxed(0xff, &fpga->leds); return 0; } static int fpga_resume_noirq(struct device *dev) { - __raw_writew(~fpga_led_state, &fpga->leds); + writew_relaxed(~fpga_led_state, &fpga->leds); return 0; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 5f5b975887fc..b5608b1f9fbd 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -70,6 +70,7 @@ static u32 errata; static struct omap_dma_global_context_registers { u32 dma_irqenable_l0; + u32 dma_irqenable_l1; u32 dma_ocp_sysconfig; u32 dma_gcr; } omap_dma_global_context; @@ -1973,10 +1974,17 @@ static struct irqaction omap24xx_dma_irq; /*----------------------------------------------------------------------------*/ +/* + * Note that we are currently using only IRQENABLE_L0 and L1. + * As the DSP may be using IRQENABLE_L2 and L3, let's not + * touch those for now. + */ void omap_dma_global_context_save(void) { omap_dma_global_context.dma_irqenable_l0 = p->dma_read(IRQENABLE_L0, 0); + omap_dma_global_context.dma_irqenable_l1 = + p->dma_read(IRQENABLE_L1, 0); omap_dma_global_context.dma_ocp_sysconfig = p->dma_read(OCP_SYSCONFIG, 0); omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0); @@ -1991,6 +1999,8 @@ void omap_dma_global_context_restore(void) OCP_SYSCONFIG, 0); p->dma_write(omap_dma_global_context.dma_irqenable_l0, IRQENABLE_L0, 0); + p->dma_write(omap_dma_global_context.dma_irqenable_l1, + IRQENABLE_L1, 0); if (IS_DMA_ERRATA(DMA_ROMCODE_BUG)) p->dma_write(0x3 , IRQSTATUS_L0, 0); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 869254cebf84..db10169a08de 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -103,7 +103,7 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer) timer->context.tmar); omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, timer->context.tsicr); - __raw_writel(timer->context.tier, timer->irq_ena); + writel_relaxed(timer->context.tier, timer->irq_ena); omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, timer->context.tclr); } @@ -699,9 +699,9 @@ int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask) omap_dm_timer_enable(timer); if (timer->revision == 1) - l = __raw_readl(timer->irq_ena) & ~mask; + l = readl_relaxed(timer->irq_ena) & ~mask; - __raw_writel(l, timer->irq_dis); + writel_relaxed(l, timer->irq_dis); l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask; omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l); @@ -722,7 +722,7 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) return 0; } - l = __raw_readl(timer->irq_stat); + l = readl_relaxed(timer->irq_stat); return l; } diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 2861b155485a..dd79f3005cdf 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -280,20 +280,20 @@ static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, int posted) { if (posted) - while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) + while (readl_relaxed(timer->pend) & (reg >> WPSHIFT)) cpu_relax(); - return __raw_readl(timer->func_base + (reg & 0xff)); + return readl_relaxed(timer->func_base + (reg & 0xff)); } static inline void __omap_dm_timer_write(struct omap_dm_timer *timer, u32 reg, u32 val, int posted) { if (posted) - while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) + while (readl_relaxed(timer->pend) & (reg >> WPSHIFT)) cpu_relax(); - __raw_writel(val, timer->func_base + (reg & 0xff)); + writel_relaxed(val, timer->func_base + (reg & 0xff)); } static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) @@ -301,7 +301,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) u32 tidr; /* Assume v1 ip if bits [31:16] are zero */ - tidr = __raw_readl(timer->io_base); + tidr = readl_relaxed(timer->io_base); if (!(tidr >> 16)) { timer->revision = 1; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; @@ -385,7 +385,7 @@ static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, } /* Ack possibly pending interrupt */ - __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); } static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, @@ -399,7 +399,7 @@ static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer, unsigned int value) { - __raw_writel(value, timer->irq_ena); + writel_relaxed(value, timer->irq_ena); __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0); } @@ -412,7 +412,7 @@ __omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted) static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { - __raw_writel(value, timer->irq_stat); + writel_relaxed(value, timer->irq_stat); } #endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 6816192a7561..b61a3bcc2fa8 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -597,51 +597,3 @@ void __init orion_gpio_init(struct device_node *np, orion_gpio_chip_count++; } - -#ifdef CONFIG_OF -static void __init orion_gpio_of_init_one(struct device_node *np, - int irq_gpio_base) -{ - int ngpio, gpio_base, mask_offset; - void __iomem *base; - int ret, i; - int irqs[4]; - int secondary_irq_base; - - ret = of_property_read_u32(np, "ngpio", &ngpio); - if (ret) - goto out; - ret = of_property_read_u32(np, "mask-offset", &mask_offset); - if (ret == -EINVAL) - mask_offset = 0; - else - goto out; - base = of_iomap(np, 0); - if (!base) - goto out; - - secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count); - gpio_base = 32 * orion_gpio_chip_count; - - /* Get the interrupt numbers. Each chip can have up to 4 - * interrupt handlers, with each handler dealing with 8 GPIO - * pins. */ - - for (i = 0; i < 4; i++) - irqs[i] = irq_of_parse_and_map(np, i); - - orion_gpio_init(np, gpio_base, ngpio, base, mask_offset, - secondary_irq_base, irqs); - return; -out: - pr_err("%s: %s: missing mandatory property\n", __func__, np->name); -} - -void __init orion_gpio_of_init(int irq_gpio_base) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, "marvell,orion-gpio") - orion_gpio_of_init_one(np, irq_gpio_base); -} -#endif diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h index 50547e417936..96be19e9bd93 100644 --- a/arch/arm/plat-orion/include/plat/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -12,5 +12,4 @@ #define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); -void __init orion_dt_init_irq(void); #endif diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h index 614dcac9dc52..e763988b04b9 100644 --- a/arch/arm/plat-orion/include/plat/orion-gpio.h +++ b/arch/arm/plat-orion/include/plat/orion-gpio.h @@ -33,5 +33,4 @@ void __init orion_gpio_init(struct device_node *np, int secondary_irq_base, int irq[4]); -void __init orion_gpio_of_init(int irq_gpio_base); #endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 807df142444b..8c1fc06007c0 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -20,47 +20,6 @@ #include <plat/orion-gpio.h> #include <mach/bridge-regs.h> -#ifdef CONFIG_MULTI_IRQ_HANDLER -/* - * Compiling with both non-DT and DT support enabled, will - * break asm irq handler used by non-DT boards. Therefore, - * we provide a C-style irq handler even for non-DT boards, - * if MULTI_IRQ_HANDLER is set. - * - * Notes: - * - this is prepared for Kirkwood and Dove only, update - * accordingly if you add Orion5x or MV78x00. - * - Orion5x uses different macro names and has only one - * set of CAUSE/MASK registers. - * - MV78x00 uses the same macro names but has a third - * set of CAUSE/MASK registers. - * - */ - -static void __iomem *orion_irq_base = IRQ_VIRT_BASE; - -asmlinkage void -__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs) -{ - u32 stat; - - stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF); - stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF); - if (stat) { - unsigned int hwirq = __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF); - stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF); - if (stat) { - unsigned int hwirq = 32 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } -} -#endif - void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { struct irq_chip_generic *gc; @@ -78,40 +37,4 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) ct->chip.irq_unmask = irq_gc_mask_set_bit; irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); - -#ifdef CONFIG_MULTI_IRQ_HANDLER - set_handle_irq(orion_legacy_handle_irq); -#endif -} - -#ifdef CONFIG_OF -static int __init orion_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - int i = 0; - void __iomem *base; - - do { - base = of_iomap(np, i); - if (base) { - orion_irq_init(i * 32, base + 0x04); - i++; - } - } while (base); - - irq_domain_add_legacy(np, i * 32, 0, 0, - &irq_domain_simple_ops, NULL); - return 0; -} - -static const struct of_device_id orion_irq_match[] = { - { .compatible = "marvell,orion-intc", - .data = orion_add_irq_domain, }, - {}, -}; - -void __init orion_dt_init_irq(void) -{ - of_irq_init(orion_irq_match); } -#endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 25c826ed3b65..5e5beaa9ae15 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -4,6 +4,9 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include +ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include + obj-y := obj-m := obj-n := dummy.o diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index be4ad0b21c08..2157c5b539e6 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -124,8 +124,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns; if (bl_data->enable_gpio >= 0) samsung_bl_data->enable_gpio = bl_data->enable_gpio; - if (bl_data->enable_gpio_flags) - samsung_bl_data->enable_gpio_flags = bl_data->enable_gpio_flags; if (bl_data->init) samsung_bl_data->init = bl_data->init; if (bl_data->notify) diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 7231c8e4975e..72d4178ad23b 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -119,6 +119,7 @@ struct s3c_plltab { struct s3c_cpufreq_config { struct s3c_freq freq; struct s3c_freq max; + struct clk *mpll; struct cpufreq_frequency_table pll; struct s3c_clkdivs divs; struct s3c_cpufreq_info *info; /* for core, not drivers */ diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 5992b8dd9b89..5a237db9f9eb 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -43,16 +43,6 @@ extern unsigned long samsung_cpu_id; #define S5PV210_CPU_ID 0x43110000 #define S5PV210_CPU_MASK 0xFFFFF000 -#define EXYNOS4210_CPU_ID 0x43210000 -#define EXYNOS4212_CPU_ID 0x43220000 -#define EXYNOS4412_CPU_ID 0xE4412200 -#define EXYNOS4_CPU_MASK 0xFFFE0000 - -#define EXYNOS5250_SOC_ID 0x43520000 -#define EXYNOS5420_SOC_ID 0xE5420000 -#define EXYNOS5440_SOC_ID 0xE5440000 -#define EXYNOS5_SOC_MASK 0xFFFFF000 - #define IS_SAMSUNG_CPU(name, id, mask) \ static inline int is_samsung_##name(void) \ { \ @@ -68,12 +58,6 @@ IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) -IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) -IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) -IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ @@ -126,50 +110,6 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_s5pv210() 0 #endif -#if defined(CONFIG_CPU_EXYNOS4210) -# define soc_is_exynos4210() is_samsung_exynos4210() -#else -# define soc_is_exynos4210() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS4212) -# define soc_is_exynos4212() is_samsung_exynos4212() -#else -# define soc_is_exynos4212() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS4412) -# define soc_is_exynos4412() is_samsung_exynos4412() -#else -# define soc_is_exynos4412() 0 -#endif - -#define EXYNOS4210_REV_0 (0x0) -#define EXYNOS4210_REV_1_0 (0x10) -#define EXYNOS4210_REV_1_1 (0x11) - -#if defined(CONFIG_SOC_EXYNOS5250) -# define soc_is_exynos5250() is_samsung_exynos5250() -#else -# define soc_is_exynos5250() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS5420) -# define soc_is_exynos5420() is_samsung_exynos5420() -#else -# define soc_is_exynos5420() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS5440) -# define soc_is_exynos5440() is_samsung_exynos5440() -#else -# define soc_is_exynos5440() 0 -#endif - -#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ - soc_is_exynos4412()) -#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420()) - #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef KHZ @@ -239,7 +179,6 @@ extern struct bus_type s3c2443_subsys; extern struct bus_type s3c6410_subsys; extern struct bus_type s5p64x0_subsys; extern struct bus_type s5pv210_subsys; -extern struct bus_type exynos_subsys; extern void (*s5pc1xx_idle)(void); diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index 98087b655df0..469b86260fe3 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -125,8 +125,8 @@ device_initcall(s5p_mfc_memory_init); int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, int depth, void *data) { - __be32 *prop; - unsigned long len; + const __be32 *prop; + int len; struct s5p_mfc_dt_meminfo mfc_mem; if (!data) diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S index c5001659bdf8..25c68ceb9e2b 100644 --- a/arch/arm/plat-samsung/s5p-sleep.S +++ b/arch/arm/plat-samsung/s5p-sleep.S @@ -22,7 +22,6 @@ */ #include <linux/linkage.h> -#include <asm/asm-offsets.h> .data .align diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 2c4332b9f948..fce41e93b6a4 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -6,12 +6,6 @@ config PLAT_VERSATILE_CLOCK config PLAT_VERSATILE_CLCD bool -config PLAT_VERSATILE_LEDS - def_bool y if NEW_LEDS - depends on ARCH_REALVIEW || ARCH_VERSATILE - select LEDS_CLASS - select LEDS_TRIGGERS - config PLAT_VERSATILE_SCHED_CLOCK def_bool y diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index f88d448b629c..2e0c472958ae 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -2,6 +2,5 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o -obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c deleted file mode 100644 index d2490d00b46c..000000000000 --- a/arch/arm/plat-versatile/leds.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Driver for the 8 user LEDs found on the RealViews and Versatiles - * Based on DaVinci's DM365 board code - * - * License terms: GNU General Public License (GPL) version 2 - * Author: Linus Walleij <triad@df.lth.se> - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/leds.h> - -#include <mach/hardware.h> -#include <mach/platform.h> - -#ifdef VERSATILE_SYS_BASE -#define LEDREG (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) -#endif - -#ifdef REALVIEW_SYS_BASE -#define LEDREG (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) -#endif - -struct versatile_led { - struct led_classdev cdev; - u8 mask; -}; - -/* - * The triggers lines up below will only be used if the - * LED triggers are compiled in. - */ -static const struct { - const char *name; - const char *trigger; -} versatile_leds[] = { - { "versatile:0", "heartbeat", }, - { "versatile:1", "mmc0", }, - { "versatile:2", "cpu0" }, - { "versatile:3", "cpu1" }, - { "versatile:4", "cpu2" }, - { "versatile:5", "cpu3" }, - { "versatile:6", }, - { "versatile:7", }, -}; - -static void versatile_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - struct versatile_led *led = container_of(cdev, - struct versatile_led, cdev); - u32 reg = readl(LEDREG); - - if (b != LED_OFF) - reg |= led->mask; - else - reg &= ~led->mask; - writel(reg, LEDREG); -} - -static enum led_brightness versatile_led_get(struct led_classdev *cdev) -{ - struct versatile_led *led = container_of(cdev, - struct versatile_led, cdev); - u32 reg = readl(LEDREG); - - return (reg & led->mask) ? LED_FULL : LED_OFF; -} - -static int __init versatile_leds_init(void) -{ - int i; - - /* All ON */ - writel(0xff, LEDREG); - for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) { - struct versatile_led *led; - - led = kzalloc(sizeof(*led), GFP_KERNEL); - if (!led) - break; - - led->cdev.name = versatile_leds[i].name; - led->cdev.brightness_set = versatile_led_set; - led->cdev.brightness_get = versatile_led_get; - led->cdev.default_trigger = versatile_leds[i].trigger; - led->mask = BIT(i); - - if (led_classdev_register(NULL, &led->cdev) < 0) { - kfree(led); - break; - } - } - - return 0; -} - -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(versatile_leds_init); diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index f0759e70fb86..fe6ca574d093 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -22,11 +22,10 @@ @ r9 = normal "successful" return address @ r10 = this threads thread_info structure @ lr = unrecognised instruction return address -@ IRQs disabled. +@ IRQs enabled. @ ENTRY(do_vfp) inc_preempt_count r10, r4 - enable_irq ldr r4, .LCvfp ldr r11, [r10, #TI_CPU] @ CPU number add r10, r10, #TI_VFPSTATE @ r10 = workspace diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index b96723e258a0..1e632430570b 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -339,6 +339,14 @@ static int __init xen_pm_init(void) } late_initcall(xen_pm_init); + +/* empty stubs */ +void xen_arch_pre_suspend(void) { } +void xen_arch_post_suspend(int suspend_cancelled) { } +void xen_timer_resume(void) { } +void xen_arch_resume(void) { } + + /* In the hypervisor.S file. */ EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op); @@ -350,4 +358,5 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op); EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_multicall); EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index d1cf7b7c2200..44e3a5f10c4c 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -89,6 +89,7 @@ HYPERCALL2(memory_op); HYPERCALL2(physdev_op); HYPERCALL3(vcpu_op); HYPERCALL1(tmem_op); +HYPERCALL2(multicall); ENTRY(privcmd_call) stmdb sp!, {r4} |