diff options
Diffstat (limited to 'arch/arm/mach-pxa/balloon3.c')
| -rw-r--r-- | arch/arm/mach-pxa/balloon3.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index ef3e8b1e06c1..fc0b8544e174 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -591,7 +591,7 @@ static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ct BALLOON3_NAND_CONTROL_REG); if (balloon3_ctl_set) __raw_writel(balloon3_ctl_set, - BALLOON3_NAND_CONTROL_REG | + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); } @@ -608,7 +608,7 @@ static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) __raw_writew( BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3, - BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); /* Deassert correct nCE line */ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip, @@ -626,7 +626,7 @@ static int balloon3_nand_probe(struct platform_device *pdev) int ret; __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, - BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR); ver = __raw_readw(BALLOON3_FPGA_VER); if (ver < 0x4f08) @@ -649,7 +649,7 @@ static int balloon3_nand_probe(struct platform_device *pdev) BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 | BALLOON3_NAND_CONTROL_FLWP, - BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); return 0; err2: @@ -807,7 +807,7 @@ static void __init balloon3_init(void) static struct map_desc balloon3_io_desc[] __initdata = { { /* CPLD/FPGA */ - .virtual = BALLOON3_FPGA_VIRT, + .virtual = (unsigned long)BALLOON3_FPGA_VIRT, .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS), .length = BALLOON3_FPGA_LENGTH, .type = MT_DEVICE, @@ -828,5 +828,5 @@ MACHINE_START(BALLOON3, "Balloon3") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = balloon3_init, - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, MACHINE_END |