diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-devkit8000.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 170 |
1 files changed, 75 insertions, 95 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 77022b588816..a07086d6a0b2 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -33,6 +33,7 @@ #include <linux/i2c/twl.h> #include <mach/hardware.h> +#include <mach/id.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -58,9 +59,6 @@ #include "mux.h" #include "hsmmc.h" -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K #define OMAP_DM9000_GPIO_IRQ 25 @@ -104,20 +102,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = { .dma_channel = -1, /* disable DMA in OMAP NAND driver */ }; -static struct resource devkit8000_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device devkit8000_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &devkit8000_nand_data, - }, - .num_resources = 1, - .resource = &devkit8000_nand_resource, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -126,54 +110,50 @@ static struct omap2_hsmmc_info mmc[] = { }, {} /* Terminator */ }; -static struct omap_board_config_kernel devkit8000_config[] __initdata = { -}; static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 1); return 0; } static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) { + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 0); } + static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) { + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 1); return 0; } static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) { + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 0); } -static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev) -{ +static struct regulator_consumer_supply devkit8000_vmmc1_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); - return 0; -} - -static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev) -{ -} - - -static struct regulator_consumer_supply devkit8000_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply devkit8000_vsim_supply = { - .supply = "vmmc_aux", -}; +/* ads7846 on SPI */ +static struct regulator_consumer_supply devkit8000_vio_supply = + REGULATOR_SUPPLY("vcc", "spi2.0"); static struct omap_dss_device devkit8000_lcd_device = { .name = "lcd", - .driver_name = "innolux_at_panel", + .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, + .reset_gpio = -EINVAL, /* will be replaced */ .platform_enable = devkit8000_panel_enable_lcd, .platform_disable = devkit8000_panel_disable_lcd, }; @@ -182,6 +162,7 @@ static struct omap_dss_device devkit8000_dvi_device = { .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, + .reset_gpio = -EINVAL, /* will be replaced */ .platform_enable = devkit8000_panel_enable_dvi, .platform_disable = devkit8000_panel_disable_dvi, }; @@ -191,8 +172,6 @@ static struct omap_dss_device devkit8000_tv_device = { .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = devkit8000_panel_enable_tv, - .platform_disable = devkit8000_panel_disable_tv, }; @@ -216,10 +195,8 @@ static struct platform_device devkit8000_dss_device = { }, }; -static struct regulator_consumer_supply devkit8000_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &devkit8000_dss_device.dev, -}; +static struct regulator_consumer_supply devkit8000_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); static int board_keymap[] = { KEY(0, 0, KEY_1), @@ -266,7 +243,21 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* link regulators to MMC adapters */ devkit8000_vmmc1_supply.dev = mmc[0].dev; - devkit8000_vsim_supply.dev = mmc[0].dev; + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + /* gpio + 1 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + 1; + gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); + /* Disable until needed */ + gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + + /* gpio + 7 is "DVI_PD" (out, active low) */ + devkit8000_dvi_device.reset_gpio = gpio + 7; + gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); + /* Disable until needed */ + gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); return 0; } @@ -282,16 +273,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .setup = devkit8000_twl_gpio_setup, }; -static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = { - { - .supply = "vdvi", - .dev = &devkit8000_lcd_device.dev, - }, - { - .supply = "vdds_dsi", - .dev = &devkit8000_dss_device.dev, - } -}; +static struct regulator_consumer_supply devkit8000_vpll1_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data devkit8000_vmmc1 = { @@ -308,21 +291,6 @@ static struct regulator_init_data devkit8000_vmmc1 = { .consumer_supplies = &devkit8000_vmmc1_supply, }; -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data devkit8000_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vsim_supply, -}; - /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ static struct regulator_init_data devkit8000_vdac = { .constraints = { @@ -337,10 +305,9 @@ static struct regulator_init_data devkit8000_vdac = { .consumer_supplies = &devkit8000_vdda_dac_supply, }; -/* VPLL2 for digital video outputs */ -static struct regulator_init_data devkit8000_vpll2 = { +/* VPLL1 for digital video outputs */ +static struct regulator_init_data devkit8000_vpll1 = { .constraints = { - .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL @@ -348,8 +315,23 @@ static struct regulator_init_data devkit8000_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll2_supplies), - .consumer_supplies = devkit8000_vpll2_supplies, + .num_consumer_supplies = 1, + .consumer_supplies = &devkit8000_vpll1_supply, +}; + +/* VAUX4 for ads7846 and nubs */ +static struct regulator_init_data devkit8000_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &devkit8000_vio_supply, }; static struct twl4030_usb_data devkit8000_usb_data = { @@ -374,15 +356,15 @@ static struct twl4030_platform_data devkit8000_twldata = { .gpio = &devkit8000_gpio_data, .codec = &devkit8000_codec_data, .vmmc1 = &devkit8000_vmmc1, - .vsim = &devkit8000_vsim, .vdac = &devkit8000_vdac, - .vpll2 = &devkit8000_vpll2, + .vpll1 = &devkit8000_vpll1, + .vio = &devkit8000_vio, .keypad = &devkit8000_kp_data, }; static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = { { - I2C_BOARD_INFO("twl4030", 0x48), + I2C_BOARD_INFO("tps65930", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, .platform_data = &devkit8000_twldata, @@ -464,8 +446,6 @@ static struct platform_device keys_gpio = { static void __init devkit8000_init_irq(void) { - omap_board_config = devkit8000_config; - omap_board_config_size = ARRAY_SIZE(devkit8000_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -560,6 +540,9 @@ static struct platform_device omap_dm9000_dev = { static void __init omap_dm9000_init(void) { + unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; + struct omap_die_id odi; + if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", OMAP_DM9000_GPIO_IRQ); @@ -567,6 +550,16 @@ static void __init omap_dm9000_init(void) } gpio_direction_input(OMAP_DM9000_GPIO_IRQ); + + /* init the mac address using DIE id */ + omap_get_die_id(&odi); + + eth_addr[0] = 0x02; /* locally administered */ + eth_addr[1] = odi.id_1 & 0xff; + eth_addr[2] = (odi.id_0 & 0xff000000) >> 24; + eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16; + eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8; + eth_addr[5] = (odi.id_0 & 0x000000ff); } static struct platform_device *devkit8000_devices[] __initdata = { @@ -581,8 +574,6 @@ static void __init devkit8000_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -604,13 +595,9 @@ static void __init devkit8000_flash_init(void) if (nandcs < GPMC_CS_NUM) { devkit8000_nand_data.cs = nandcs; - devkit8000_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - devkit8000_nand_data.gpmc_baseaddr = (void *) - (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&devkit8000_nand_device) < 0) + if (gpmc_nand_init(&devkit8000_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } @@ -797,8 +784,6 @@ static void __init devkit8000_init(void) devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); - omap_board_config = devkit8000_config; - omap_board_config_size = ARRAY_SIZE(devkit8000_config); spi_register_board_info(devkit8000_spi_board_info, ARRAY_SIZE(devkit8000_spi_board_info)); @@ -814,17 +799,12 @@ static void __init devkit8000_init(void) omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } -static void __init devkit8000_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .phys_io = 0x48000000, .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = devkit8000_map_io, + .map_io = omap3_map_io, + .reserve = omap_reserve, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, .timer = &omap_timer, |