diff options
Diffstat (limited to 'arch/arm/mach-mx1')
| -rw-r--r-- | arch/arm/mach-mx1/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-mx1/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mx1/clock.c | 40 | ||||
| -rw-r--r-- | arch/arm/mach-mx1/devices.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-mx1/mx1ads.c | 68 | ||||
| -rw-r--r-- | arch/arm/mach-mx1/scb9328.c | 160 |
6 files changed, 243 insertions, 36 deletions
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig index 2b59fc74784f..eb7660f5d4b7 100644 --- a/arch/arm/mach-mx1/Kconfig +++ b/arch/arm/mach-mx1/Kconfig @@ -1,6 +1,6 @@ if ARCH_MX1 -comment "MX1 Platforms" +comment "MX1 platforms:" config MACH_MXLADS bool @@ -11,4 +11,9 @@ config ARCH_MX1ADS help Say Y here if you are using Motorola MX1ADS/MXLADS boards +config MACH_SCB9328 + bool "Synertronixx scb9328" + help + Say Y here if you are using a Synertronixx scb9328 board + endif diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile index b969719011fa..82f1309568ef 100644 --- a/arch/arm/mach-mx1/Makefile +++ b/arch/arm/mach-mx1/Makefile @@ -8,3 +8,4 @@ obj-y += generic.o clock.o devices.o # Specific board support obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o +obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c index 4bcd1ece55f5..0d0f306851d0 100644 --- a/arch/arm/mach-mx1/clock.c +++ b/arch/arm/mach-mx1/clock.c @@ -25,6 +25,7 @@ #include <mach/clock.h> #include <mach/hardware.h> +#include <mach/common.h> #include "crm_regs.h" static int _clk_enable(struct clk *clk) @@ -87,33 +88,6 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) return clk->parent->set_rate(clk->parent, rate); } -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref) -{ - unsigned long long ll; - unsigned long quot; - - u32 mfi = (pll >> 10) & 0xf; - u32 mfn = pll & 0x3ff; - u32 mfd = (pll >> 16) & 0x3ff; - u32 pd = (pll >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - ll = 2 * (unsigned long long)f_ref * - ((mfi << 16) + (mfn << 16) / (mfd + 1)); - quot = (pd + 1) * (1 << 16); - ll += quot / 2; - do_div(ll, quot); - return (unsigned long)ll; -} - static unsigned long clk16m_get_rate(struct clk *clk) { return 16000000; @@ -188,7 +162,7 @@ static struct clk prem_clk = { static unsigned long system_clk_get_rate(struct clk *clk) { - return mx1_decode_pll(__raw_readl(CCM_SPCTL0), + return mxc_decode_pll(__raw_readl(CCM_SPCTL0), clk_get_rate(clk->parent)); } @@ -200,7 +174,7 @@ static struct clk system_clk = { static unsigned long mcu_clk_get_rate(struct clk *clk) { - return mx1_decode_pll(__raw_readl(CCM_MPCTL0), + return mxc_decode_pll(__raw_readl(CCM_MPCTL0), clk_get_rate(clk->parent)); } @@ -488,7 +462,7 @@ static struct clk clko_clk = { }; static struct clk dma_clk = { - .name = "dma_clk", + .name = "dma", .parent = &hclk, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -539,7 +513,7 @@ static struct clk gpt_clk = { }; static struct clk uart_clk = { - .name = "uart_clk", + .name = "uart", .parent = &perclk[0], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -621,7 +595,7 @@ static struct clk *mxc_clks[] = { &rtc_clk, }; -int __init mxc_clocks_init(unsigned long fref) +int __init mx1_clocks_init(unsigned long fref) { struct clk **clkp; unsigned int reg; @@ -652,5 +626,7 @@ int __init mxc_clocks_init(unsigned long fref) clk_enable(&hclk); clk_enable(&fclk); + mxc_timer_init(&gpt_clk); + return 0; } diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c index 686d8d2dbb24..97f42d96d7a1 100644 --- a/arch/arm/mach-mx1/devices.c +++ b/arch/arm/mach-mx1/devices.c @@ -23,8 +23,11 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <mach/irqs.h> #include <mach/hardware.h> +#include "devices.h" + static struct resource imx_csi_resources[] = { [0] = { .start = 0x00224000, diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 2e4b185fe4a9..89738fe576b1 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -16,6 +16,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/i2c/pcf857x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -24,7 +26,11 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/imx-uart.h> -#include <mach/iomux-mx1-mx2.h> +#include <mach/irqs.h> +#ifdef CONFIG_I2C_IMX +#include <mach/i2c.h> +#endif +#include <mach/iomux.h> #include "devices.h" /* @@ -104,6 +110,55 @@ static struct platform_device flash_device = { }; /* + * I2C + */ + +#ifdef CONFIG_I2C_IMX +static int i2c_pins[] = { + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, +}; + +static int i2c_init(struct device *dev) +{ + return mxc_gpio_setup_multiple_pins(i2c_pins, + ARRAY_SIZE(i2c_pins), "I2C"); +} + +static void i2c_exit(struct device *dev) +{ + mxc_gpio_release_multiple_pins(i2c_pins, + ARRAY_SIZE(i2c_pins)); +} + +static struct pcf857x_platform_data pcf857x_data[] = { + { + .gpio_base = 4 * 32, + }, { + .gpio_base = 4 * 32 + 16, + } +}; + +static struct imxi2c_platform_data mx1ads_i2c_data = { + .bitrate = 100000, + .init = i2c_init, + .exit = i2c_exit, +}; + +static struct i2c_board_info mx1ads_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf857x", 0x22), + .type = "pcf8575", + .platform_data = &pcf857x_data[0], + }, { + I2C_BOARD_INFO("pcf857x", 0x24), + .type = "pcf8575", + .platform_data = &pcf857x_data[1], + }, +}; +#endif + +/* * Board init */ static void __init mx1ads_init(void) @@ -114,12 +169,19 @@ static void __init mx1ads_init(void) /* Physmap flash */ mxc_register_device(&flash_device, &mx1ads_flash_data); + + /* I2C */ +#ifdef CONFIG_I2C_IMX + i2c_register_board_info(0, mx1ads_i2c_devices, + ARRAY_SIZE(mx1ads_i2c_devices)); + + mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); +#endif } static void __init mx1ads_timer_init(void) { - mxc_clocks_init(32000); - mxc_timer_init("gpt_clk"); + mx1_clocks_init(32000); } struct sys_timer mx1ads_timer = { diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c new file mode 100644 index 000000000000..0e71f3fa28bf --- /dev/null +++ b/arch/arm/mach-mx1/scb9328.c @@ -0,0 +1,160 @@ +/* + * linux/arch/arm/mach-mx1/scb9328.c + * + * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> + * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/interrupt.h> +#include <linux/dm9000.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/imx-uart.h> +#include <mach/iomux.h> + +#include "devices.h" + +/* + * This scb9328 has a 32MiB flash + */ +static struct resource flash_resource = { + .start = IMX_CS0_PHYS, + .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data scb_flash_data = { + .width = 2, +}; + +static struct platform_device scb_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &scb_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +/* + * scb9328 has a DM9000 network controller + * connected to CS5, with 16 bit data path + * and interrupt connected to GPIO 3 + */ + +/* + * internal datapath is fixed 16 bit + */ +static struct dm9000_plat_data dm9000_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +/* + * the DM9000 drivers wants two defined address spaces + * to gain access to address latch registers and the data path. + */ +static struct resource dm9000x_resources[] = { + [0] = { + .name = "address area", + .start = IMX_CS5_PHYS, + .end = IMX_CS5_PHYS + 1, + .flags = IORESOURCE_MEM /* address access */ + }, + [1] = { + .name = "data area", + .start = IMX_CS5_PHYS + 4, + .end = IMX_CS5_PHYS + 5, + .flags = IORESOURCE_MEM /* data access */ + }, + [2] = { + .start = IRQ_GPIOC(3), + .end = IRQ_GPIOC(3), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL + }, +}; + +static struct platform_device dm9000x_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000x_resources), + .resource = dm9000x_resources, + .dev = { + .platform_data = &dm9000_platdata, + } +}; + +static int mxc_uart1_pins[] = { + PC9_PF_UART1_CTS, + PC10_PF_UART1_RTS, + PC11_PF_UART1_TXD, + PC12_PF_UART1_RXD, +}; + +static int uart1_mxc_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), "UART1"); +} + +static int uart1_mxc_exit(struct platform_device *pdev) +{ + mxc_gpio_release_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins)); + return 0; +} + +static struct imxuart_platform_data uart_pdata = { + .init = uart1_mxc_init, + .exit = uart1_mxc_exit, + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &scb_flash_device, + &dm9000x_device, +}; + +/* + * scb9328_init - Init the CPU card itself + */ +static void __init scb9328_init(void) +{ + mxc_register_device(&imx_uart1_device, &uart_pdata); + + printk(KERN_INFO"Scb9328: Adding devices\n"); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init scb9328_timer_init(void) +{ + mx1_clocks_init(32000); +} + +static struct sys_timer scb9328_timer = { + .init = scb9328_timer_init, +}; + +MACHINE_START(SCB9328, "Synertronixx scb9328") + /* Sascha Hauer */ + .phys_io = 0x00200000, + .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, + .boot_params = 0x08000100, + .map_io = mxc_map_io, + .init_irq = mxc_init_irq, + .timer = &scb9328_timer, + .init_machine = scb9328_init, +MACHINE_END |