diff options
Diffstat (limited to 'arch/arm/mach-lpc32xx/phy3250.c')
| -rw-r--r-- | arch/arm/mach-lpc32xx/phy3250.c | 43 |
1 files changed, 39 insertions, 4 deletions
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index eade77fbebdd..03ee3491b7cf 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -30,12 +30,13 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/amba/pl022.h> +#include <linux/amba/pl08x.h> +#include <linux/amba/mmci.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/clk.h> -#include <linux/amba/pl08x.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -50,9 +51,12 @@ /* * Mapped GPIOLIB GPIOs */ -#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) -#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) -#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) +#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) +#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) +#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) +#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5) +#define MMC_CD_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 1) +#define MMC_WP_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 0) /* * AMBA LCD controller @@ -260,11 +264,32 @@ static struct pl08x_platform_data pl08x_pd = { .mem_buses = PL08X_AHB1, }; +static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios) +{ + /* Only on and off are supported */ + if (ios->power_mode == MMC_POWER_OFF) + gpio_set_value(MMC_PWR_ENABLE_GPIO, 0); + else + gpio_set_value(MMC_PWR_ENABLE_GPIO, 1); + return 0; +} + +static struct mmci_platform_data lpc32xx_mmci_data = { + .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .ios_handler = mmc_handle_ios, + .dma_filter = NULL, + /* No DMA for now since AMBA PL080 dmaengine driver only does scatter + * gather, and the MMCI driver doesn't do it this way */ +}; + static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data), OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data), OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), + OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd", + &lpc32xx_mmci_data), { } }; @@ -308,6 +333,11 @@ static void __init lpc3250_machine_init(void) * detection or a data fault will occur, so enable the clocks * here. */ + tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); + tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN | + LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN; + __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); + tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN), LPC32XX_CLKPWR_LCDCLK_CTRL); @@ -335,6 +365,11 @@ static void __init lpc3250_machine_init(void) else if (gpio_direction_output(SPI0_CS_GPIO, 1)) printk(KERN_ERR "Error setting gpio %u to output", SPI0_CS_GPIO); + + if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en")) + pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO); + else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1)) + pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO); } static char const *lpc32xx_dt_compat[] __initdata = { |