summaryrefslogtreecommitdiff
path: root/arch/arm/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/compressed/debug.S4
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi4
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1.dtsi4
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts16
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-zero-w.dts9
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b.dts5
-rw-r--r--arch/arm/boot/dts/bcm283x.dtsi7
-rw-r--r--arch/arm/boot/dts/gemini.dtsi3
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi8
-rw-r--r--arch/arm/boot/dts/moxart.dtsi3
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi1
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi16
12 files changed, 54 insertions, 26 deletions
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 5392ee63338f..8f6e37177de1 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -23,7 +23,11 @@ ENTRY(putc)
strb r0, [r1]
mov r0, #0x03 @ SYS_WRITEC
ARM( svc #0x123456 )
+#ifdef CONFIG_CPU_V7M
+ THUMB( bkpt #0xab )
+#else
THUMB( svc #0xab )
+#endif
mov pc, lr
.align 2
1: .word _GLOBAL_OFFSET_TABLE_ - .
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 7ff0811e61db..4960722aab32 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -178,7 +178,7 @@
};
i2c0: i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
+ compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -189,7 +189,7 @@
};
i2c1: i2c@11100 {
- compatible = "marvell,mv64xxx-i2c";
+ compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 63a5af898165..cf0087b4c9e1 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -67,8 +67,8 @@
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
- ethernet-phy@1 {
- reg = <0x1>;
+ ethernet-phy@0 {
+ reg = <0x0>;
interrupt-parent = <&pioA>;
interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index c7e9ccf2bc87..cbc26001247b 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -309,7 +309,7 @@
vddana-supply = <&vdd_3v3_lp_reg>;
vref-supply = <&vdd_3v3_lp_reg>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_adc_default>;
+ pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
status = "okay";
};
@@ -340,6 +340,20 @@
bias-disable;
};
+ /*
+ * The ADTRG pin can work on any edge type.
+ * In here it's being pulled up, so need to
+ * connect it to ground to get an edge e.g.
+ * Trigger can be configured on falling, rise
+ * or any edge, and the pull-up can be changed
+ * to pull-down or left floating according to
+ * needs.
+ */
+ pinctrl_adtrg_default: adtrg_default {
+ pinmux = <PIN_PD31__ADTRG>;
+ bias-pull-up;
+ };
+
pinctrl_charger_chglev: charger_chglev {
pinmux = <PIN_PA12__GPIO>;
bias-disable;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 82651c3eb682..b8565fc33eea 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -18,12 +18,9 @@
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
model = "Raspberry Pi Zero W";
- /* Needed by firmware to properly init UARTs */
- aliases {
- uart0 = "/soc/serial@7e201000";
- uart1 = "/soc/serial@7e215040";
- serial0 = "/soc/serial@7e201000";
- serial1 = "/soc/serial@7e215040";
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
};
leds {
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 20725ca487f3..c71a0d73d2a2 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -8,6 +8,11 @@
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
model = "Raspberry Pi 3 Model B";
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
memory {
reg = <0 0x40000000>;
};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 431dcfc900c0..013431e3d7c3 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -20,8 +20,13 @@
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyAMA0";
+ stdout-path = "serial0:115200n8";
};
thermal-zones {
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index c68e8d430234..f0d178c77153 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -145,11 +145,12 @@
};
watchdog@41000000 {
- compatible = "cortina,gemini-watchdog";
+ compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
reg = <0x41000000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_WDOG>;
clocks = <&syscon GEMINI_CLK_APB>;
+ clock-names = "PCLK";
};
uart0: serial@42000000 {
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index f46814a7ea44..4d308d17f040 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -144,10 +144,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index 1f4c795d3f72..da7b3237bfe9 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -87,9 +87,10 @@
};
watchdog: watchdog@98500000 {
- compatible = "moxa,moxart-watchdog";
+ compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
reg = <0x98500000 0x10>;
clocks = <&clk_apb>;
+ clock-names = "PCLK";
};
sdhci: sdhci@98e00000 {
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 38d2216c7ead..b1a26b42d190 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1430,6 +1430,7 @@
atmel,min-sample-rate-hz = <200000>;
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
+ atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index b147cb0dc14b..eef072a21acc 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -311,8 +311,8 @@
#size-cells = <0>;
reg = <0>;
- tcon1_in_drc1: endpoint@0 {
- reg = <0>;
+ tcon1_in_drc1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&drc1_out_tcon1>;
};
};
@@ -1012,8 +1012,8 @@
#size-cells = <0>;
reg = <1>;
- be1_out_drc1: endpoint@0 {
- reg = <0>;
+ be1_out_drc1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&drc1_in_be1>;
};
};
@@ -1042,8 +1042,8 @@
#size-cells = <0>;
reg = <0>;
- drc1_in_be1: endpoint@0 {
- reg = <0>;
+ drc1_in_be1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&be1_out_drc1>;
};
};
@@ -1053,8 +1053,8 @@
#size-cells = <0>;
reg = <1>;
- drc1_out_tcon1: endpoint@0 {
- reg = <0>;
+ drc1_out_tcon1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&tcon1_in_drc1>;
};
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 18:41:12 +0000