diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-sabresd.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 92 |
1 files changed, 91 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 6e5dfdb32416..39eafc222a2e 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -27,6 +27,15 @@ enable-active-high; }; + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 0>; + enable-active-high; + }; + reg_audio: wm8962_supply { compatible = "regulator-fixed"; regulator-name = "wm8962-supply"; @@ -41,12 +50,14 @@ volume-up { label = "Volume Up"; gpios = <&gpio1 4 0>; + gpio-key,wakeup; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; gpios = <&gpio1 5 0>; + gpio-key,wakeup; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; @@ -77,6 +88,22 @@ status = "okay"; }; +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 9 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_2>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_1>; @@ -93,7 +120,7 @@ codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; - clocks = <&clks 169>; + clocks = <&clks 201>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; @@ -113,6 +140,68 @@ }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio6>; + interrupts = <7 2>; + wakeup-gpios = <&gpio6 7 0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; @@ -125,6 +214,7 @@ }; &usbh1 { + vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; |