diff options
Diffstat (limited to 'Documentation')
74 files changed, 5028 insertions, 4348 deletions
diff --git a/Documentation/ABI/testing/debugfs-kmemtrace b/Documentation/ABI/testing/debugfs-kmemtrace new file mode 100644 index 000000000000..5e6a92a02d85 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-kmemtrace @@ -0,0 +1,71 @@ +What: /sys/kernel/debug/kmemtrace/ +Date: July 2008 +Contact: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> +Description: + +In kmemtrace-enabled kernels, the following files are created: + +/sys/kernel/debug/kmemtrace/ + cpu<n> (0400) Per-CPU tracing data, see below. (binary) + total_overruns (0400) Total number of bytes which were dropped from + cpu<n> files because of full buffer condition, + non-binary. (text) + abi_version (0400) Kernel's kmemtrace ABI version. (text) + +Each per-CPU file should be read according to the relay interface. That is, +the reader should set affinity to that specific CPU and, as currently done by +the userspace application (though there are other methods), use poll() with +an infinite timeout before every read(). Otherwise, erroneous data may be +read. The binary data has the following _core_ format: + + Event ID (1 byte) Unsigned integer, one of: + 0 - represents an allocation (KMEMTRACE_EVENT_ALLOC) + 1 - represents a freeing of previously allocated memory + (KMEMTRACE_EVENT_FREE) + Type ID (1 byte) Unsigned integer, one of: + 0 - this is a kmalloc() / kfree() + 1 - this is a kmem_cache_alloc() / kmem_cache_free() + 2 - this is a __get_free_pages() et al. + Event size (2 bytes) Unsigned integer representing the + size of this event. Used to extend + kmemtrace. Discard the bytes you + don't know about. + Sequence number (4 bytes) Signed integer used to reorder data + logged on SMP machines. Wraparound + must be taken into account, although + it is unlikely. + Caller address (8 bytes) Return address to the caller. + Pointer to mem (8 bytes) Pointer to target memory area. Can be + NULL, but not all such calls might be + recorded. + +In case of KMEMTRACE_EVENT_ALLOC events, the next fields follow: + + Requested bytes (8 bytes) Total number of requested bytes, + unsigned, must not be zero. + Allocated bytes (8 bytes) Total number of actually allocated + bytes, unsigned, must not be lower + than requested bytes. + Requested flags (4 bytes) GFP flags supplied by the caller. + Target CPU (4 bytes) Signed integer, valid for event id 1. + If equal to -1, target CPU is the same + as origin CPU, but the reverse might + not be true. + +The data is made available in the same endianness the machine has. + +Other event ids and type ids may be defined and added. Other fields may be +added by increasing event size, but see below for details. +Every modification to the ABI, including new id definitions, are followed +by bumping the ABI version by one. + +Adding new data to the packet (features) is done at the end of the mandatory +data: + Feature size (2 byte) + Feature ID (1 byte) + Feature data (Feature size - 3 bytes) + + +Users: + kmemtrace-user - git://repo.or.cz/kmemtrace-user.git + diff --git a/Documentation/ABI/testing/debugfs-pktcdvd b/Documentation/ABI/testing/debugfs-pktcdvd index bf9c16b64c34..cf11736acb76 100644 --- a/Documentation/ABI/testing/debugfs-pktcdvd +++ b/Documentation/ABI/testing/debugfs-pktcdvd @@ -1,4 +1,4 @@ -What: /debug/pktcdvd/pktcdvd[0-7] +What: /sys/kernel/debug/pktcdvd/pktcdvd[0-7] Date: Oct. 2006 KernelVersion: 2.6.20 Contact: Thomas Maier <balagi@justmail.de> @@ -10,10 +10,10 @@ debugfs interface The pktcdvd module (packet writing driver) creates these files in debugfs: -/debug/pktcdvd/pktcdvd[0-7]/ +/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/ info (0444) Lots of driver statistics and infos. Example: ------- -cat /debug/pktcdvd/pktcdvd0/info +cat /sys/kernel/debug/pktcdvd/pktcdvd0/info diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index e8ffc70ffe12..4f9ba3c2fca7 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -69,9 +69,13 @@ Description: gpe1F: 0 invalid gpe_all: 1192 sci: 1194 + sci_not: 0 - sci - The total number of times the ACPI SCI - has claimed an interrupt. + sci - The number of times the ACPI SCI + has been called and claimed an interrupt. + + sci_not - The number of times the ACPI SCI + has been called and NOT claimed an interrupt. gpe_all - count of SCI caused by GPEs. diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab new file mode 100644 index 000000000000..6dcf75e594fb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-slab @@ -0,0 +1,479 @@ +What: /sys/kernel/slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The /sys/kernel/slab directory contains a snapshot of the + internal state of the SLUB allocator for each cache. Certain + files may be modified to change the behavior of the cache (and + any cache it aliases, if any). +Users: kernel memory tuning tools + +What: /sys/kernel/slab/cache/aliases +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The aliases file is read-only and specifies how many caches + have merged into this cache. + +What: /sys/kernel/slab/cache/align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The align file is read-only and specifies the cache's object + alignment in bytes. + +What: /sys/kernel/slab/cache/alloc_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The alloc_calls file is read-only and lists the kernel code + locations from which allocations for this cache were performed. + The alloc_calls file only contains information if debugging is + enabled for that cache (see Documentation/vm/slub.txt). + +What: /sys/kernel/slab/cache/alloc_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The alloc_fastpath file is read-only and specifies how many + objects have been allocated using the fast path. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_from_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The alloc_from_partial file is read-only and specifies how + many times a cpu slab has been full and it has been refilled + by using a slab from the list of partially used slabs. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_refill +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The alloc_refill file is read-only and specifies how many + times the per-cpu freelist was empty but there were objects + available as the result of remote cpu frees. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The alloc_slab file is read-only and specifies how many times + a new slab had to be allocated from the page allocator. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The alloc_slowpath file is read-only and specifies how many + objects have been allocated using the slow path because of a + refill or allocation from a partial or new slab. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/cache_dma +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The cache_dma file is read-only and specifies whether objects + are from ZONE_DMA. + Available when CONFIG_ZONE_DMA is enabled. + +What: /sys/kernel/slab/cache/cpu_slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The cpu_slabs file is read-only and displays how many cpu slabs + are active and their NUMA locality. + +What: /sys/kernel/slab/cache/cpuslab_flush +Date: April 2009 +KernelVersion: 2.6.31 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file cpuslab_flush is read-only and specifies how many + times a cache's cpu slabs have been flushed as the result of + destroying or shrinking a cache, a cpu going offline, or as + the result of forcing an allocation from a certain node. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/ctor +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The ctor file is read-only and specifies the cache's object + constructor function, which is invoked for each object when a + new slab is allocated. + +What: /sys/kernel/slab/cache/deactivate_empty +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file deactivate_empty is read-only and specifies how many + times an empty cpu slab was deactivated. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_full +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file deactivate_full is read-only and specifies how many + times a full cpu slab was deactivated. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_remote_frees +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file deactivate_remote_frees is read-only and specifies how + many times a cpu slab has been deactivated and contained free + objects that were freed remotely. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_to_head +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file deactivate_to_head is read-only and specifies how + many times a partial cpu slab was deactivated and added to the + head of its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_to_tail +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file deactivate_to_tail is read-only and specifies how + many times a partial cpu slab was deactivated and added to the + tail of its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/destroy_by_rcu +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The destroy_by_rcu file is read-only and specifies whether + slabs (not objects) are freed by rcu. + +What: /sys/kernel/slab/cache/free_add_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file free_add_partial is read-only and specifies how many + times an object has been freed in a full slab so that it had to + added to its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The free_calls file is read-only and lists the locations of + object frees if slab debugging is enabled (see + Documentation/vm/slub.txt). + +What: /sys/kernel/slab/cache/free_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The free_fastpath file is read-only and specifies how many + objects have been freed using the fast path because it was an + object from the cpu slab. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_frozen +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The free_frozen file is read-only and specifies how many + objects have been freed to a frozen slab (i.e. a remote cpu + slab). + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_remove_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file free_remove_partial is read-only and specifies how + many times an object has been freed to a now-empty slab so + that it had to be removed from its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The free_slab file is read-only and specifies how many times an + empty slab has been freed back to the page allocator. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The free_slowpath file is read-only and specifies how many + objects have been freed using the slow path (i.e. to a full or + partial slab). + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/hwcache_align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The hwcache_align file is read-only and specifies whether + objects are aligned on cachelines. + +What: /sys/kernel/slab/cache/min_partial +Date: February 2009 +KernelVersion: 2.6.30 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + David Rientjes <rientjes@google.com> +Description: + The min_partial file specifies how many empty slabs shall + remain on a node's partial list to avoid the overhead of + allocating new slabs. Such slabs may be reclaimed by utilizing + the shrink file. + +What: /sys/kernel/slab/cache/object_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The object_size file is read-only and specifies the cache's + object size. + +What: /sys/kernel/slab/cache/objects +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The objects file is read-only and displays how many objects are + active and from which nodes they are from. + +What: /sys/kernel/slab/cache/objects_partial +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The objects_partial file is read-only and displays how many + objects are on partial slabs and from which nodes they are + from. + +What: /sys/kernel/slab/cache/objs_per_slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file objs_per_slab is read-only and specifies how many + objects may be allocated from a single slab of the order + specified in /sys/kernel/slab/cache/order. + +What: /sys/kernel/slab/cache/order +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The order file specifies the page order at which new slabs are + allocated. It is writable and can be changed to increase the + number of objects per slab. If a slab cannot be allocated + because of fragmentation, SLUB will retry with the minimum order + possible depending on its characteristics. + +What: /sys/kernel/slab/cache/order_fallback +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file order_fallback is read-only and specifies how many + times an allocation of a new slab has not been possible at the + cache's order and instead fallen back to its minimum possible + order. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/partial +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The partial file is read-only and displays how long many + partial slabs there are and how long each node's list is. + +What: /sys/kernel/slab/cache/poison +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The poison file specifies whether objects should be poisoned + when a new slab is allocated. + +What: /sys/kernel/slab/cache/reclaim_account +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The reclaim_account file specifies whether the cache's objects + are reclaimable (and grouped by their mobility). + +What: /sys/kernel/slab/cache/red_zone +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The red_zone file specifies whether the cache's objects are red + zoned. + +What: /sys/kernel/slab/cache/remote_node_defrag_ratio +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The file remote_node_defrag_ratio specifies the percentage of + times SLUB will attempt to refill the cpu slab with a partial + slab from a remote node as opposed to allocating a new slab on + the local node. This reduces the amount of wasted memory over + the entire system but can be expensive. + Available when CONFIG_NUMA is enabled. + +What: /sys/kernel/slab/cache/sanity_checks +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The sanity_checks file specifies whether expensive checks + should be performed on free and, at minimum, enables double free + checks. Caches that enable sanity_checks cannot be merged with + caches that do not. + +What: /sys/kernel/slab/cache/shrink +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The shrink file is written when memory should be reclaimed from + a cache. Empty partial slabs are freed and the partial list is + sorted so the slabs with the fewest available objects are used + first. + +What: /sys/kernel/slab/cache/slab_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The slab_size file is read-only and specifies the object size + with metadata (debugging information and alignment) in bytes. + +What: /sys/kernel/slab/cache/slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The slabs file is read-only and displays how long many slabs + there are (both cpu and partial) and from which nodes they are + from. + +What: /sys/kernel/slab/cache/store_user +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The store_user file specifies whether the location of + allocation or free should be tracked for a cache. + +What: /sys/kernel/slab/cache/total_objects +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The total_objects file is read-only and displays how many total + objects a cache has and from which nodes they are from. + +What: /sys/kernel/slab/cache/trace +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + The trace file specifies whether object allocations and frees + should be traced. + +What: /sys/kernel/slab/cache/validate +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg <penberg@cs.helsinki.fi>, + Christoph Lameter <cl@linux-foundation.org> +Description: + Writing to the validate file causes SLUB to traverse all of its + cache's objects and check the validity of metadata. diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index b2a4d6d244d9..01f24e94bdb6 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -136,7 +136,7 @@ exactly why. The standard 32-bit addressing PCI device would do something like this: - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "mydev: No suitable DMA available.\n"); goto ignore_this_device; @@ -155,9 +155,9 @@ all 64-bits when accessing streaming DMA: int using_dac; - if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { using_dac = 1; - } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { using_dac = 0; } else { printk(KERN_WARNING @@ -170,14 +170,14 @@ the case would look like this: int using_dac, consistent_using_dac; - if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { using_dac = 1; consistent_using_dac = 1; - pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { using_dac = 0; consistent_using_dac = 0; - pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); } else { printk(KERN_WARNING "mydev: No suitable DMA available.\n"); @@ -192,7 +192,7 @@ check the return value from pci_set_consistent_dma_mask(). Finally, if your device can only drive the low 24-bits of address during PCI bus mastering you might do something like: - if (pci_set_dma_mask(pdev, DMA_24BIT_MASK)) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(24))) { printk(KERN_WARNING "mydev: 24-bit DMA addressing not available.\n"); goto ignore_this_device; @@ -213,7 +213,7 @@ most specific mask. Here is pseudo-code showing how this might be done: - #define PLAYBACK_ADDRESS_BITS DMA_32BIT_MASK + #define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32) #define RECORD_ADDRESS_BITS 0x00ffffff struct my_sound_card *card; diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index a3a83d38f96f..b1eb661e6302 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -31,7 +31,7 @@ PS_METHOD = $(prefer-db2x) ### # The targets that may be used. -PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs +PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) xmldocs: $(BOOKS) @@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF $@ $(call cmd,db2pdf) -main_idx = Documentation/DocBook/index.html +index = index.html +main_idx = Documentation/DocBook/$(index) build_main_index = rm -rf $(main_idx) && \ echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \ echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \ @@ -213,11 +214,12 @@ silent_gen_xml = : dochelp: @echo ' Linux kernel internal documentation in different formats:' @echo ' htmldocs - HTML' - @echo ' installmandocs - install man pages generated by mandocs' - @echo ' mandocs - man pages' @echo ' pdfdocs - PDF' @echo ' psdocs - Postscript' @echo ' xmldocs - XML DocBook' + @echo ' mandocs - man pages' + @echo ' installmandocs - install man pages generated by mandocs' + @echo ' cleandocs - clean all generated DocBook files' ### # Temporary files left by various tools @@ -231,10 +233,14 @@ clean-files := $(DOCBOOKS) \ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \ $(patsubst %.xml, %.html, $(DOCBOOKS)) \ $(patsubst %.xml, %.9, $(DOCBOOKS)) \ - $(C-procfs-example) + $(C-procfs-example) $(index) clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man +cleandocs: + $(Q)rm -f $(call objectify, $(clean-files)) + $(Q)rm -rf $(call objectify, $(clean-dirs)) + # Declare the contents of the .PHONY variable as phony. We keep that # information in a variable se we can use it in if_changed and friends. diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 58c194572c76..44b3def961a2 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -190,16 +190,20 @@ X!Ekernel/module.c !Edrivers/pci/pci.c !Edrivers/pci/pci-driver.c !Edrivers/pci/remove.c -!Edrivers/pci/pci-acpi.c !Edrivers/pci/search.c !Edrivers/pci/msi.c !Edrivers/pci/bus.c +!Edrivers/pci/access.c +!Edrivers/pci/irq.c +!Edrivers/pci/htirq.c <!-- FIXME: Removed for now since no structured comments in source X!Edrivers/pci/hotplug.c --> !Edrivers/pci/probe.c +!Edrivers/pci/slot.c !Edrivers/pci/rom.c !Edrivers/pci/iov.c +!Idrivers/pci/pci-sysfs.c </sect1> <sect1><title>PCI Hotplug Support Library</title> !Edrivers/pci/hotplug/pci_hotplug_core.c @@ -259,7 +263,7 @@ X!Earch/x86/kernel/mca_32.c !Eblock/blk-tag.c !Iblock/blk-tag.c !Eblock/blk-integrity.c -!Iblock/blktrace.c +!Ikernel/trace/blktrace.c !Iblock/genhd.c !Eblock/genhd.c </chapter> diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 372dec20c8da..5cff41a5fa7c 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -281,7 +281,7 @@ seriously wrong while debugging, it will most often be the case that you want to enable gdb to be verbose about its target communications. You do this prior to issuing the <constant>target - remote</constant> command by typing in: <constant>set remote debug 1</constant> + remote</constant> command by typing in: <constant>set debug remote 1</constant> </para> </chapter> <chapter id="KGDBTestSuite"> diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index 46b08fef3744..7a2e0e98986a 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -1137,8 +1137,8 @@ if (err < 0) return err; /* check PCI availability (28bit DMA) */ - if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 || - pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) { + if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 || + pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) { printk(KERN_ERR "error to set 28bit mask DMA\n"); pci_disable_device(pci); return -ENXIO; @@ -1252,8 +1252,8 @@ err = pci_enable_device(pci); if (err < 0) return err; - if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 || - pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) { + if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 || + pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) { printk(KERN_ERR "error to set 28bit mask DMA\n"); pci_disable_device(pci); return -ENXIO; diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index ecad6ee75705..6fab97ea7e6b 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -1040,23 +1040,21 @@ Front merges are handled by the binary trees in AS and deadline schedulers. iii. Plugging the queue to batch requests in anticipation of opportunities for merge/sort optimizations -This is just the same as in 2.4 so far, though per-device unplugging -support is anticipated for 2.5. Also with a priority-based i/o scheduler, -such decisions could be based on request priorities. - Plugging is an approach that the current i/o scheduling algorithm resorts to so that it collects up enough requests in the queue to be able to take advantage of the sorting/merging logic in the elevator. If the queue is empty when a request comes in, then it plugs the request queue -(sort of like plugging the bottom of a vessel to get fluid to build up) +(sort of like plugging the bath tub of a vessel to get fluid to build up) till it fills up with a few more requests, before starting to service the requests. This provides an opportunity to merge/sort the requests before passing them down to the device. There are various conditions when the queue is unplugged (to open up the flow again), either through a scheduled task or could be on demand. For example wait_on_buffer sets the unplugging going -(by running tq_disk) so the read gets satisfied soon. So in the read case, -the queue gets explicitly unplugged as part of waiting for completion, -in fact all queues get unplugged as a side-effect. +through sync_buffer() running blk_run_address_space(mapping). Or the caller +can do it explicity through blk_unplug(bdev). So in the read case, +the queue gets explicitly unplugged as part of waiting for completion on that +buffer. For page driven IO, the address space ->sync_page() takes care of +doing the blk_run_address_space(). Aside: This is kind of controversial territory, as it's not clear if plugging is @@ -1067,11 +1065,6 @@ Aside: multi-page bios being queued in one shot, we may not need to wait to merge a big request from the broken up pieces coming by. - Per-queue granularity unplugging (still a Todo) may help reduce some of the - concerns with just a single tq_disk flush approach. Something like - blk_kick_queue() to unplug a specific queue (right away ?) - or optionally, all queues, is in the plan. - 4.4 I/O contexts I/O contexts provide a dynamically allocated per process data area. They may be used in I/O schedulers, and in the block layer (could be used for IO statis, diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX index 86f054c47013..c08df56dd91b 100644 --- a/Documentation/blockdev/00-INDEX +++ b/Documentation/blockdev/00-INDEX @@ -8,6 +8,8 @@ cpqarray.txt - info on using Compaq's SMART2 Intelligent Disk Array Controllers. floppy.txt - notes and driver options for the floppy disk driver. +mflash.txt + - info on mGine m(g)flash driver for linux. nbd.txt - info on a TCP implementation of a network block device. paride.txt diff --git a/Documentation/blockdev/mflash.txt b/Documentation/blockdev/mflash.txt new file mode 100644 index 000000000000..1f610ecf698a --- /dev/null +++ b/Documentation/blockdev/mflash.txt @@ -0,0 +1,84 @@ +This document describes m[g]flash support in linux. + +Contents + 1. Overview + 2. Reserved area configuration + 3. Example of mflash platform driver registration + +1. Overview + +Mflash and gflash are embedded flash drive. The only difference is mflash is +MCP(Multi Chip Package) device. These two device operate exactly same way. +So the rest mflash repersents mflash and gflash altogether. + +Internally, mflash has nand flash and other hardware logics and supports +2 different operation (ATA, IO) modes. ATA mode doesn't need any new +driver and currently works well under standard IDE subsystem. Actually it's +one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have +IDE interface. + +Followings are brief descriptions about IO mode. +A. IO mode based on ATA protocol and uses some custom command. (read confirm, +write confirm) +B. IO mode uses SRAM bus interface. +C. IO mode supports 4kB boot area, so host can boot from mflash. + +2. Reserved area configuration +If host boot from mflash, usually needs raw area for boot loader image. All of +the mflash's block device operation will be taken this value as start offset. +Note that boot loader's size of reserved area and kernel configuration value +must be same. + +3. Example of mflash platform driver registration +Working mflash is very straight forward. Adding platform device stuff to board +configuration file is all. Here is some pseudo example. + +static struct mg_drv_data mflash_drv_data = { + /* If you want to polling driver set to 1 */ + .use_polling = 0, + /* device attribution */ + .dev_attr = MG_BOOT_DEV +}; + +static struct resource mg_mflash_rsc[] = { + /* Base address of mflash */ + [0] = { + .start = 0x08000000, + .end = 0x08000000 + SZ_64K - 1, + .flags = IORESOURCE_MEM + }, + /* mflash interrupt pin */ + [1] = { + .start = IRQ_GPIO(84), + .end = IRQ_GPIO(84), + .flags = IORESOURCE_IRQ + }, + /* mflash reset pin */ + [2] = { + .start = 43, + .end = 43, + .name = MG_RST_PIN, + .flags = IORESOURCE_IO + }, + /* mflash reset-out pin + * If you use mflash as storage device (i.e. other than MG_BOOT_DEV), + * should assign this */ + [3] = { + .start = 51, + .end = 51, + .name = MG_RSTOUT_PIN, + .flags = IORESOURCE_IO + } +}; + +static struct platform_device mflash_dev = { + .name = MG_DEV_NAME, + .id = -1, + .dev = { + .platform_data = &mflash_drv_data, + }, + .num_resources = ARRAY_SIZE(mg_mflash_rsc), + .resource = mg_mflash_rsc +}; + +platform_device_register(&mflash_dev); diff --git a/Documentation/cgroups/cpuacct.txt b/Documentation/cgroups/cpuacct.txt index bb775fbe43d7..8b930946c52a 100644 --- a/Documentation/cgroups/cpuacct.txt +++ b/Documentation/cgroups/cpuacct.txt @@ -30,3 +30,21 @@ The above steps create a new group g1 and move the current shell process (bash) into it. CPU time consumed by this bash and its children can be obtained from g1/cpuacct.usage and the same is accumulated in /cgroups/cpuacct.usage also. + +cpuacct.stat file lists a few statistics which further divide the +CPU time obtained by the cgroup into user and system times. Currently +the following statistics are supported: + +user: Time spent by tasks of the cgroup in user mode. +system: Time spent by tasks of the cgroup in kernel mode. + +user and system are in USER_HZ unit. + +cpuacct controller uses percpu_counter interface to collect user and +system times. This has two side effects: + +- It is theoretically possible to see wrong values for user and system times. + This is because percpu_counter_read() on 32bit systems isn't safe + against concurrent writes. +- It is possible to see slightly outdated values for user and system times + due to the batch processing nature of percpu_counter. diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index a98a7fe7aabb..1a608877b14e 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -6,15 +6,14 @@ used here with the memory controller that is used in hardware. Salient features -a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages +a. Enable control of Anonymous, Page Cache (mapped and unmapped) and + Swap Cache memory pages. b. The infrastructure allows easy addition of other types of memory to control c. Provides *zero overhead* for non memory controller users d. Provides a double LRU: global memory pressure causes reclaim from the global LRU; a cgroup on hitting a limit, reclaims from the per cgroup LRU -NOTE: Swap Cache (unmapped) is not accounted now. - Benefits and Purpose of the memory controller The memory controller isolates the memory behaviour of a group of tasks @@ -290,34 +289,44 @@ will be charged as a new owner of it. moved to the parent. If you want to avoid that, force_empty will be useful. 5.2 stat file - memory.stat file includes following statistics (now) - cache - # of pages from page-cache and shmem. - rss - # of pages from anonymous memory. - pgpgin - # of event of charging - pgpgout - # of event of uncharging - active_anon - # of pages on active lru of anon, shmem. - inactive_anon - # of pages on active lru of anon, shmem - active_file - # of pages on active lru of file-cache - inactive_file - # of pages on inactive lru of file cache - unevictable - # of pages cannot be reclaimed.(mlocked etc) - - Below is depend on CONFIG_DEBUG_VM. - inactive_ratio - VM internal parameter. (see mm/page_alloc.c) - recent_rotated_anon - VM internal parameter. (see mm/vmscan.c) - recent_rotated_file - VM internal parameter. (see mm/vmscan.c) - recent_scanned_anon - VM internal parameter. (see mm/vmscan.c) - recent_scanned_file - VM internal parameter. (see mm/vmscan.c) - - Memo: + +memory.stat file includes following statistics + +cache - # of bytes of page cache memory. +rss - # of bytes of anonymous and swap cache memory. +pgpgin - # of pages paged in (equivalent to # of charging events). +pgpgout - # of pages paged out (equivalent to # of uncharging events). +active_anon - # of bytes of anonymous and swap cache memory on active + lru list. +inactive_anon - # of bytes of anonymous memory and swap cache memory on + inactive lru list. +active_file - # of bytes of file-backed memory on active lru list. +inactive_file - # of bytes of file-backed memory on inactive lru list. +unevictable - # of bytes of memory that cannot be reclaimed (mlocked etc). + +The following additional stats are dependent on CONFIG_DEBUG_VM. + +inactive_ratio - VM internal parameter. (see mm/page_alloc.c) +recent_rotated_anon - VM internal parameter. (see mm/vmscan.c) +recent_rotated_file - VM internal parameter. (see mm/vmscan.c) +recent_scanned_anon - VM internal parameter. (see mm/vmscan.c) +recent_scanned_file - VM internal parameter. (see mm/vmscan.c) + +Memo: recent_rotated means recent frequency of lru rotation. recent_scanned means recent # of scans to lru. showing for better debug please see the code for meanings. +Note: + Only anonymous and swap cache memory is listed as part of 'rss' stat. + This should not be confused with the true 'resident set size' or the + amount of physical memory used by the cgroup. Per-cgroup rss + accounting is not done yet. 5.3 swappiness Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. - Following cgroup's swapiness can't be changed. + Following cgroups' swapiness can't be changed. - root cgroup (uses /proc/sys/vm/swappiness). - a cgroup which uses hierarchy and it has child cgroup. - a cgroup which uses hierarchy and not the root of hierarchy. diff --git a/Documentation/cgroups/resource_counter.txt b/Documentation/cgroups/resource_counter.txt index f196ac1d7d25..95b24d766eab 100644 --- a/Documentation/cgroups/resource_counter.txt +++ b/Documentation/cgroups/resource_counter.txt @@ -47,13 +47,18 @@ to work with it. 2. Basic accounting routines - a. void res_counter_init(struct res_counter *rc) + a. void res_counter_init(struct res_counter *rc, + struct res_counter *rc_parent) Initializes the resource counter. As usual, should be the first routine called for a new counter. - b. int res_counter_charge[_locked] - (struct res_counter *rc, unsigned long val) + The struct res_counter *parent can be used to define a hierarchical + child -> parent relationship directly in the res_counter structure, + NULL can be used to define no relationship. + + c. int res_counter_charge(struct res_counter *rc, unsigned long val, + struct res_counter **limit_fail_at) When a resource is about to be allocated it has to be accounted with the appropriate resource counter (controller should determine @@ -67,15 +72,25 @@ to work with it. * if the charging is performed first, then it should be uncharged on error path (if the one is called). - c. void res_counter_uncharge[_locked] + If the charging fails and a hierarchical dependency exists, the + limit_fail_at parameter is set to the particular res_counter element + where the charging failed. + + d. int res_counter_charge_locked + (struct res_counter *rc, unsigned long val) + + The same as res_counter_charge(), but it must not acquire/release the + res_counter->lock internally (it must be called with res_counter->lock + held). + + e. void res_counter_uncharge[_locked] (struct res_counter *rc, unsigned long val) When a resource is released (freed) it should be de-accounted from the resource counter it was accounted to. This is called "uncharging". - The _locked routines imply that the res_counter->lock is taken. - + The _locked routines imply that the res_counter->lock is taken. 2.1 Other accounting routines diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 327de1624759..53d64d382343 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -3,7 +3,7 @@ Maintained by Alan Cox <device@lanana.org> - Last revised: 29 November 2006 + Last revised: 6th April 2009 This list is the Linux Device List, the official registry of allocated device numbers and /dev directory nodes for the Linux operating @@ -2797,6 +2797,10 @@ Your cooperation is appreciated. 206 = /dev/ttySC1 SC26xx serial port 1 207 = /dev/ttySC2 SC26xx serial port 2 208 = /dev/ttySC3 SC26xx serial port 3 + 209 = /dev/ttyMAX0 MAX3100 serial port 0 + 210 = /dev/ttyMAX1 MAX3100 serial port 1 + 211 = /dev/ttyMAX2 MAX3100 serial port 2 + 212 = /dev/ttyMAX3 MAX3100 serial port 3 205 char Low-density serial ports (alternate device) 0 = /dev/culu0 Callout device for ttyLU0 diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt index 83009fdcbbc8..2e2c2ea90ceb 100644 --- a/Documentation/driver-model/platform.txt +++ b/Documentation/driver-model/platform.txt @@ -169,3 +169,62 @@ three different ways to find such a match: be probed later if another device registers. (Which is OK, since this interface is only for use with non-hotpluggable devices.) + +Early Platform Devices and Drivers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The early platform interfaces provide platform data to platform device +drivers early on during the system boot. The code is built on top of the +early_param() command line parsing and can be executed very early on. + +Example: "earlyprintk" class early serial console in 6 steps + +1. Registering early platform device data +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code registers platform device data using the function +early_platform_add_devices(). In the case of early serial console this +should be hardware configuration for the serial port. Devices registered +at this point will later on be matched against early platform drivers. + +2. Parsing kernel command line +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code calls parse_early_param() to parse the kernel +command line. This will execute all matching early_param() callbacks. +User specified early platform devices will be registered at this point. +For the early serial console case the user can specify port on the +kernel command line as "earlyprintk=serial.0" where "earlyprintk" is +the class string, "serial" is the name of the platfrom driver and +0 is the platform device id. If the id is -1 then the dot and the +id can be omitted. + +3. Installing early platform drivers belonging to a certain class +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code may optionally force registration of all early +platform drivers belonging to a certain class using the function +early_platform_driver_register_all(). User specified devices from +step 2 have priority over these. This step is omitted by the serial +driver example since the early serial driver code should be disabled +unless the user has specified port on the kernel command line. + +4. Early platform driver registration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Compiled-in platform drivers making use of early_platform_init() are +automatically registered during step 2 or 3. The serial driver example +should use early_platform_init("earlyprintk", &platform_driver). + +5. Probing of early platform drivers belonging to a certain class +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code calls early_platform_driver_probe() to match +registered early platform devices associated with a certain class with +registered early platform drivers. Matched devices will get probed(). +This step can be executed at any point during the early boot. As soon +as possible may be good for the serial port case. + +6. Inside the early platform driver probe() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver code needs to take special care during early boot, especially +when it comes to memory allocation and interrupt registration. The code +in the probe() function can use is_early_platform_device() to check if +it is called at early platform device or at the regular platform device +time. The early serial driver performs register_console() at this point. + +For further information, see <linux/platform_device.h>. diff --git a/Documentation/fb/uvesafb.txt b/Documentation/fb/uvesafb.txt index 7ac3c4078ff9..eefdd91d298a 100644 --- a/Documentation/fb/uvesafb.txt +++ b/Documentation/fb/uvesafb.txt @@ -59,7 +59,8 @@ Accepted options: ypan Enable display panning using the VESA protected mode interface. The visible screen is just a window of the video memory, console scrolling is done by changing the - start of the window. Available on x86 only. + start of the window. This option is available on x86 + only and is the default option on that architecture. ywrap Same as ypan, but assumes your gfx board can wrap-around the video memory (i.e. starts reading from top if it @@ -67,7 +68,7 @@ ywrap Same as ypan, but assumes your gfx board can wrap-around Available on x86 only. redraw Scroll by redrawing the affected part of the screen, this - is the safe (and slow) default. + is the default on non-x86. (If you're using uvesafb as a module, the above three options are used a parameter of the scroll option, e.g. scroll=ypan.) @@ -182,7 +183,7 @@ from the Video BIOS if you set pixclock to 0 in fb_var_screeninfo. -- Michal Januszewski <spock@gentoo.org> - Last updated: 2007-06-16 + Last updated: 2009-03-30 Documentation of the uvesafb options is loosely based on vesafb.txt. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 39246fc11257..de491a3e2313 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -354,7 +354,8 @@ Who: Krzysztof Piotr Oledzki <ole@ans.pl> --------------------------- -What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client() +What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client(), + i2c_adapter->client_register(), i2c_adapter->client_unregister When: 2.6.30 Check: i2c_attach_client i2c_detach_client Why: Deprecated by the new (standard) device driver binding model. Use @@ -427,3 +428,12 @@ Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to After a reasonable transition period, we will remove the legacy fakephp interface. Who: Alex Chiang <achiang@hp.com> + +--------------------------- + +What: i2c-voodoo3 driver +When: October 2009 +Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate + driver but this caused driver conflicts. +Who: Jean Delvare <khali@linux-fr.org> + Krzysztof Helt <krzysztof.h1@wp.pl> diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 52cd611277a3..8dd6db76171d 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -68,6 +68,8 @@ ncpfs.txt - info on Novell Netware(tm) filesystem using NCP protocol. nfsroot.txt - short guide on setting up a diskless box with NFS root filesystem. +nilfs2.txt + - info and mount options for the NILFS2 filesystem. ntfs.txt - info and mount options for the NTFS filesystem (Windows NT). ocfs2.txt diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 76efe5b71d7d..3120f8dd2c31 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -512,16 +512,24 @@ locking rules: BKL mmap_sem PageLocked(page) open: no yes close: no yes -fault: no yes -page_mkwrite: no yes no +fault: no yes can return with page locked +page_mkwrite: no yes can return with page locked access: no yes - ->page_mkwrite() is called when a previously read-only page is -about to become writeable. The file system is responsible for -protecting against truncate races. Once appropriate action has been -taking to lock out truncate, the page range should be verified to be -within i_size. The page mapping should also be checked that it is not -NULL. + ->fault() is called when a previously not present pte is about +to be faulted in. The filesystem must find and return the page associated +with the passed in "pgoff" in the vm_fault structure. If it is possible that +the page may be truncated and/or invalidated, then the filesystem must lock +the page, then ensure it is not already truncated (the page lock will block +subsequent truncate), and then return with VM_FAULT_LOCKED, and the page +locked. The VM will unlock the page. + + ->page_mkwrite() is called when a previously read-only pte is +about to become writeable. The filesystem again must ensure that there are +no truncate/invalidate races, and then return with the page locked. If +the page has been truncated, the filesystem should not look up a new page +like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which +will cause the VM to retry the fault. ->access() is called when get_user_pages() fails in acces_process_vm(), typically used to debug a process through diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt index c78a49b7bba6..748a1ae49e12 100644 --- a/Documentation/filesystems/caching/cachefiles.txt +++ b/Documentation/filesystems/caching/cachefiles.txt @@ -407,7 +407,7 @@ A NOTE ON SECURITY ================== CacheFiles makes use of the split security in the task_struct. It allocates -its own task_security structure, and redirects current->act_as to point to it +its own task_security structure, and redirects current->cred to point to it when it acts on behalf of another process, in that process's context. The reason it does this is that it calls vfs_mkdir() and suchlike rather than @@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what the process looks like in /proc. So CacheFiles makes use of a logical split in the security between the -objective security (task->sec) and the subjective security (task->act_as). The -objective security holds the intrinsic security properties of a process and is -never overridden. This is what appears in /proc, and is what is used when a +objective security (task->real_cred) and the subjective security (task->cred). +The objective security holds the intrinsic security properties of a process and +is never overridden. This is what appears in /proc, and is what is used when a process is the target of an operation by some other process (SIGKILL for example). diff --git a/Documentation/filesystems/knfsd-stats.txt b/Documentation/filesystems/knfsd-stats.txt new file mode 100644 index 000000000000..64ced5149d37 --- /dev/null +++ b/Documentation/filesystems/knfsd-stats.txt @@ -0,0 +1,159 @@ + +Kernel NFS Server Statistics +============================ + +This document describes the format and semantics of the statistics +which the kernel NFS server makes available to userspace. These +statistics are available in several text form pseudo files, each of +which is described separately below. + +In most cases you don't need to know these formats, as the nfsstat(8) +program from the nfs-utils distribution provides a helpful command-line +interface for extracting and printing them. + +All the files described here are formatted as a sequence of text lines, +separated by newline '\n' characters. Lines beginning with a hash +'#' character are comments intended for humans and should be ignored +by parsing routines. All other lines contain a sequence of fields +separated by whitespace. + +/proc/fs/nfsd/pool_stats +------------------------ + +This file is available in kernels from 2.6.30 onwards, if the +/proc/fs/nfsd filesystem is mounted (it almost always should be). + +The first line is a comment which describes the fields present in +all the other lines. The other lines present the following data as +a sequence of unsigned decimal numeric fields. One line is shown +for each NFS thread pool. + +All counters are 64 bits wide and wrap naturally. There is no way +to zero these counters, instead applications should do their own +rate conversion. + +pool + The id number of the NFS thread pool to which this line applies. + This number does not change. + + Thread pool ids are a contiguous set of small integers starting + at zero. The maximum value depends on the thread pool mode, but + currently cannot be larger than the number of CPUs in the system. + Note that in the default case there will be a single thread pool + which contains all the nfsd threads and all the CPUs in the system, + and thus this file will have a single line with a pool id of "0". + +packets-arrived + Counts how many NFS packets have arrived. More precisely, this + is the number of times that the network stack has notified the + sunrpc server layer that new data may be available on a transport + (e.g. an NFS or UDP socket or an NFS/RDMA endpoint). + + Depending on the NFS workload patterns and various network stack + effects (such as Large Receive Offload) which can combine packets + on the wire, this may be either more or less than the number + of NFS calls received (which statistic is available elsewhere). + However this is a more accurate and less workload-dependent measure + of how much CPU load is being placed on the sunrpc server layer + due to NFS network traffic. + +sockets-enqueued + Counts how many times an NFS transport is enqueued to wait for + an nfsd thread to service it, i.e. no nfsd thread was considered + available. + + The circumstance this statistic tracks indicates that there was NFS + network-facing work to be done but it couldn't be done immediately, + thus introducing a small delay in servicing NFS calls. The ideal + rate of change for this counter is zero; significantly non-zero + values may indicate a performance limitation. + + This can happen either because there are too few nfsd threads in the + thread pool for the NFS workload (the workload is thread-limited), + or because the NFS workload needs more CPU time than is available in + the thread pool (the workload is CPU-limited). In the former case, + configuring more nfsd threads will probably improve the performance + of the NFS workload. In the latter case, the sunrpc server layer is + already choosing not to wake idle nfsd threads because there are too + many nfsd threads which want to run but cannot, so configuring more + nfsd threads will make no difference whatsoever. The overloads-avoided + statistic (see below) can be used to distinguish these cases. + +threads-woken + Counts how many times an idle nfsd thread is woken to try to + receive some data from an NFS transport. + + This statistic tracks the circumstance where incoming + network-facing NFS work is being handled quickly, which is a good + thing. The ideal rate of change for this counter will be close + to but less than the rate of change of the packets-arrived counter. + +overloads-avoided + Counts how many times the sunrpc server layer chose not to wake an + nfsd thread, despite the presence of idle nfsd threads, because + too many nfsd threads had been recently woken but could not get + enough CPU time to actually run. + + This statistic counts a circumstance where the sunrpc layer + heuristically avoids overloading the CPU scheduler with too many + runnable nfsd threads. The ideal rate of change for this counter + is zero. Significant non-zero values indicate that the workload + is CPU limited. Usually this is associated with heavy CPU usage + on all the CPUs in the nfsd thread pool. + + If a sustained large overloads-avoided rate is detected on a pool, + the top(1) utility should be used to check for the following + pattern of CPU usage on all the CPUs associated with the given + nfsd thread pool. + + - %us ~= 0 (as you're *NOT* running applications on your NFS server) + + - %wa ~= 0 + + - %id ~= 0 + + - %sy + %hi + %si ~= 100 + + If this pattern is seen, configuring more nfsd threads will *not* + improve the performance of the workload. If this patten is not + seen, then something more subtle is wrong. + +threads-timedout + Counts how many times an nfsd thread triggered an idle timeout, + i.e. was not woken to handle any incoming network packets for + some time. + + This statistic counts a circumstance where there are more nfsd + threads configured than can be used by the NFS workload. This is + a clue that the number of nfsd threads can be reduced without + affecting performance. Unfortunately, it's only a clue and not + a strong indication, for a couple of reasons: + + - Currently the rate at which the counter is incremented is quite + slow; the idle timeout is 60 minutes. Unless the NFS workload + remains constant for hours at a time, this counter is unlikely + to be providing information that is still useful. + + - It is usually a wise policy to provide some slack, + i.e. configure a few more nfsds than are currently needed, + to allow for future spikes in load. + + +Note that incoming packets on NFS transports will be dealt with in +one of three ways. An nfsd thread can be woken (threads-woken counts +this case), or the transport can be enqueued for later attention +(sockets-enqueued counts this case), or the packet can be temporarily +deferred because the transport is currently being used by an nfsd +thread. This last case is not very interesting and is not explicitly +counted, but can be inferred from the other counters thus: + +packets-deferred = packets-arrived - ( sockets-enqueued + threads-woken ) + + +More +---- +Descriptions of the other statistics file should go here. + + +Greg Banks <gnb@sgi.com> +26 Mar 2009 diff --git a/Documentation/filesystems/nfs41-server.txt b/Documentation/filesystems/nfs41-server.txt new file mode 100644 index 000000000000..05d81cbcb2e1 --- /dev/null +++ b/Documentation/filesystems/nfs41-server.txt @@ -0,0 +1,161 @@ +NFSv4.1 Server Implementation + +Server support for minorversion 1 can be controlled using the +/proc/fs/nfsd/versions control file. The string output returned +by reading this file will contain either "+4.1" or "-4.1" +correspondingly. + +Currently, server support for minorversion 1 is disabled by default. +It can be enabled at run time by writing the string "+4.1" to +the /proc/fs/nfsd/versions control file. Note that to write this +control file, the nfsd service must be taken down. Use your user-mode +nfs-utils to set this up; see rpc.nfsd(8) + +The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based +on the latest NFSv4.1 Internet Draft: +http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29 + +From the many new features in NFSv4.1 the current implementation +focuses on the mandatory-to-implement NFSv4.1 Sessions, providing +"exactly once" semantics and better control and throttling of the +resources allocated for each client. + +Other NFSv4.1 features, Parallel NFS operations in particular, +are still under development out of tree. +See http://wiki.linux-nfs.org/wiki/index.php/PNFS_prototype_design +for more information. + +The table below, taken from the NFSv4.1 document, lists +the operations that are mandatory to implement (REQ), optional +(OPT), and NFSv4.0 operations that are required not to implement (MNI) +in minor version 1. The first column indicates the operations that +are not supported yet by the linux server implementation. + +The OPTIONAL features identified and their abbreviations are as follows: + pNFS Parallel NFS + FDELG File Delegations + DDELG Directory Delegations + +The following abbreviations indicate the linux server implementation status. + I Implemented NFSv4.1 operations. + NS Not Supported. + NS* unimplemented optional feature. + P pNFS features implemented out of tree. + PNS pNFS features that are not supported yet (out of tree). + +Operations + + +----------------------+------------+--------------+----------------+ + | Operation | REQ, REC, | Feature | Definition | + | | OPT, or | (REQ, REC, | | + | | MNI | or OPT) | | + +----------------------+------------+--------------+----------------+ + | ACCESS | REQ | | Section 18.1 | +NS | BACKCHANNEL_CTL | REQ | | Section 18.33 | +NS | BIND_CONN_TO_SESSION | REQ | | Section 18.34 | + | CLOSE | REQ | | Section 18.2 | + | COMMIT | REQ | | Section 18.3 | + | CREATE | REQ | | Section 18.4 | +I | CREATE_SESSION | REQ | | Section 18.36 | +NS*| DELEGPURGE | OPT | FDELG (REQ) | Section 18.5 | + | DELEGRETURN | OPT | FDELG, | Section 18.6 | + | | | DDELG, pNFS | | + | | | (REQ) | | +NS | DESTROY_CLIENTID | REQ | | Section 18.50 | +I | DESTROY_SESSION | REQ | | Section 18.37 | +I | EXCHANGE_ID | REQ | | Section 18.35 | +NS | FREE_STATEID | REQ | | Section 18.38 | + | GETATTR | REQ | | Section 18.7 | +P | GETDEVICEINFO | OPT | pNFS (REQ) | Section 18.40 | +P | GETDEVICELIST | OPT | pNFS (OPT) | Section 18.41 | + | GETFH | REQ | | Section 18.8 | +NS*| GET_DIR_DELEGATION | OPT | DDELG (REQ) | Section 18.39 | +P | LAYOUTCOMMIT | OPT | pNFS (REQ) | Section 18.42 | +P | LAYOUTGET | OPT | pNFS (REQ) | Section 18.43 | +P | LAYOUTRETURN | OPT | pNFS (REQ) | Section 18.44 | + | LINK | OPT | | Section 18.9 | + | LOCK | REQ | | Section 18.10 | + | LOCKT | REQ | | Section 18.11 | + | LOCKU | REQ | | Section 18.12 | + | LOOKUP | REQ | | Section 18.13 | + | LOOKUPP | REQ | | Section 18.14 | + | NVERIFY | REQ | | Section 18.15 | + | OPEN | REQ | | Section 18.16 | +NS*| OPENATTR | OPT | | Section 18.17 | + | OPEN_CONFIRM | MNI | | N/A | + | OPEN_DOWNGRADE | REQ | | Section 18.18 | + | PUTFH | REQ | | Section 18.19 | + | PUTPUBFH | REQ | | Section 18.20 | + | PUTROOTFH | REQ | | Section 18.21 | + | READ | REQ | | Section 18.22 | + | READDIR | REQ | | Section 18.23 | + | READLINK | OPT | | Section 18.24 | +NS | RECLAIM_COMPLETE | REQ | | Section 18.51 | + | RELEASE_LOCKOWNER | MNI | | N/A | + | REMOVE | REQ | | Section 18.25 | + | RENAME | REQ | | Section 18.26 | + | RENEW | MNI | | N/A | + | RESTOREFH | REQ | | Section 18.27 | + | SAVEFH | REQ | | Section 18.28 | + | SECINFO | REQ | | Section 18.29 | +NS | SECINFO_NO_NAME | REC | pNFS files | Section 18.45, | + | | | layout (REQ) | Section 13.12 | +I | SEQUENCE | REQ | | Section 18.46 | + | SETATTR | REQ | | Section 18.30 | + | SETCLIENTID | MNI | | N/A | + | SETCLIENTID_CONFIRM | MNI | | N/A | +NS | SET_SSV | REQ | | Section 18.47 | +NS | TEST_STATEID | REQ | | Section 18.48 | + | VERIFY | REQ | | Section 18.31 | +NS*| WANT_DELEGATION | OPT | FDELG (OPT) | Section 18.49 | + | WRITE | REQ | | Section 18.32 | + +Callback Operations + + +-------------------------+-----------+-------------+---------------+ + | Operation | REQ, REC, | Feature | Definition | + | | OPT, or | (REQ, REC, | | + | | MNI | or OPT) | | + +-------------------------+-----------+-------------+---------------+ + | CB_GETATTR | OPT | FDELG (REQ) | Section 20.1 | +P | CB_LAYOUTRECALL | OPT | pNFS (REQ) | Section 20.3 | +NS*| CB_NOTIFY | OPT | DDELG (REQ) | Section 20.4 | +P | CB_NOTIFY_DEVICEID | OPT | pNFS (OPT) | Section 20.12 | +NS*| CB_NOTIFY_LOCK | OPT | | Section 20.11 | +NS*| CB_PUSH_DELEG | OPT | FDELG (OPT) | Section 20.5 | + | CB_RECALL | OPT | FDELG, | Section 20.2 | + | | | DDELG, pNFS | | + | | | (REQ) | | +NS*| CB_RECALL_ANY | OPT | FDELG, | Section 20.6 | + | | | DDELG, pNFS | | + | | | (REQ) | | +NS | CB_RECALL_SLOT | REQ | | Section 20.8 | +NS*| CB_RECALLABLE_OBJ_AVAIL | OPT | DDELG, pNFS | Section 20.7 | + | | | (REQ) | | +I | CB_SEQUENCE | OPT | FDELG, | Section 20.9 | + | | | DDELG, pNFS | | + | | | (REQ) | | +NS*| CB_WANTS_CANCELLED | OPT | FDELG, | Section 20.10 | + | | | DDELG, pNFS | | + | | | (REQ) | | + +-------------------------+-----------+-------------+---------------+ + +Implementation notes: + +EXCHANGE_ID: +* only SP4_NONE state protection supported +* implementation ids are ignored + +CREATE_SESSION: +* backchannel attributes are ignored +* backchannel security parameters are ignored + +SEQUENCE: +* no support for dynamic slot table renegotiation (optional) + +nfsv4.1 COMPOUND rules: +The following cases aren't supported yet: +* Enforcing of NFS4ERR_NOT_ONLY_OP for: BIND_CONN_TO_SESSION, CREATE_SESSION, + DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID. +* DESTROY_SESSION MUST be the final operation in the COMPOUND request. + diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt new file mode 100644 index 000000000000..55c4300abfcb --- /dev/null +++ b/Documentation/filesystems/nilfs2.txt @@ -0,0 +1,200 @@ +NILFS2 +------ + +NILFS2 is a log-structured file system (LFS) supporting continuous +snapshotting. In addition to versioning capability of the entire file +system, users can even restore files mistakenly overwritten or +destroyed just a few seconds ago. Since NILFS2 can keep consistency +like conventional LFS, it achieves quick recovery after system +crashes. + +NILFS2 creates a number of checkpoints every few seconds or per +synchronous write basis (unless there is no change). Users can select +significant versions among continuously created checkpoints, and can +change them into snapshots which will be preserved until they are +changed back to checkpoints. + +There is no limit on the number of snapshots until the volume gets +full. Each snapshot is mountable as a read-only file system +concurrently with its writable mount, and this feature is convenient +for online backup. + +The userland tools are included in nilfs-utils package, which is +available from the following download page. At least "mkfs.nilfs2", +"mount.nilfs2", "umount.nilfs2", and "nilfs_cleanerd" (so called +cleaner or garbage collector) are required. Details on the tools are +described in the man pages included in the package. + +Project web page: http://www.nilfs.org/en/ +Download page: http://www.nilfs.org/en/download.html +Git tree web page: http://www.nilfs.org/git/ +NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users + +Caveats +======= + +Features which NILFS2 does not support yet: + + - atime + - extended attributes + - POSIX ACLs + - quotas + - writable snapshots + - remote backup (CDP) + - data integrity + - defragmentation + +Mount options +============= + +NILFS2 supports the following mount options: +(*) == default + +barrier=on(*) This enables/disables barriers. barrier=off disables + it, barrier=on enables it. +errors=continue(*) Keep going on a filesystem error. +errors=remount-ro Remount the filesystem read-only on an error. +errors=panic Panic and halt the machine if an error occurs. +cp=n Specify the checkpoint-number of the snapshot to be + mounted. Checkpoints and snapshots are listed by lscp + user command. Only the checkpoints marked as snapshot + are mountable with this option. Snapshot is read-only, + so a read-only mount option must be specified together. +order=relaxed(*) Apply relaxed order semantics that allows modified data + blocks to be written to disk without making a + checkpoint if no metadata update is going. This mode + is equivalent to the ordered data mode of the ext3 + filesystem except for the updates on data blocks still + conserve atomicity. This will improve synchronous + write performance for overwriting. +order=strict Apply strict in-order semantics that preserves sequence + of all file operations including overwriting of data + blocks. That means, it is guaranteed that no + overtaking of events occurs in the recovered file + system after a crash. + +NILFS2 usage +============ + +To use nilfs2 as a local file system, simply: + + # mkfs -t nilfs2 /dev/block_device + # mount -t nilfs2 /dev/block_device /dir + +This will also invoke the cleaner through the mount helper program +(mount.nilfs2). + +Checkpoints and snapshots are managed by the following commands. +Their manpages are included in the nilfs-utils package above. + + lscp list checkpoints or snapshots. + mkcp make a checkpoint or a snapshot. + chcp change an existing checkpoint to a snapshot or vice versa. + rmcp invalidate specified checkpoint(s). + +To mount a snapshot, + + # mount -t nilfs2 -r -o cp=<cno> /dev/block_device /snap_dir + +where <cno> is the checkpoint number of the snapshot. + +To unmount the NILFS2 mount point or snapshot, simply: + + # umount /dir + +Then, the cleaner daemon is automatically shut down by the umount +helper program (umount.nilfs2). + +Disk format +=========== + +A nilfs2 volume is equally divided into a number of segments except +for the super block (SB) and segment #0. A segment is the container +of logs. Each log is composed of summary information blocks, payload +blocks, and an optional super root block (SR): + + ______________________________________________________ + | |SB| | Segment | Segment | Segment | ... | Segment | | + |_|__|_|____0____|____1____|____2____|_____|____N____|_| + 0 +1K +4K +8M +16M +24M +(8MB x N) + . . (Typical offsets for 4KB-block) + . . + .______________________. + | log | log |... | log | + |__1__|__2__|____|__m__| + . . + . . + . . + .______________________________. + | Summary | Payload blocks |SR| + |_blocks__|_________________|__| + +The payload blocks are organized per file, and each file consists of +data blocks and B-tree node blocks: + + |<--- File-A --->|<--- File-B --->| + _______________________________________________________________ + | Data blocks | B-tree blocks | Data blocks | B-tree blocks | ... + _|_____________|_______________|_____________|_______________|_ + + +Since only the modified blocks are written in the log, it may have +files without data blocks or B-tree node blocks. + +The organization of the blocks is recorded in the summary information +blocks, which contains a header structure (nilfs_segment_summary), per +file structures (nilfs_finfo), and per block structures (nilfs_binfo): + + _________________________________________________________________________ + | Summary | finfo | binfo | ... | binfo | finfo | binfo | ... | binfo |... + |_blocks__|___A___|_(A,1)_|_____|(A,Na)_|___B___|_(B,1)_|_____|(B,Nb)_|___ + + +The logs include regular files, directory files, symbolic link files +and several meta data files. The mata data files are the files used +to maintain file system meta data. The current version of NILFS2 uses +the following meta data files: + + 1) Inode file (ifile) -- Stores on-disk inodes + 2) Checkpoint file (cpfile) -- Stores checkpoints + 3) Segment usage file (sufile) -- Stores allocation state of segments + 4) Data address translation file -- Maps virtual block numbers to usual + (DAT) block numbers. This file serves to + make on-disk blocks relocatable. + +The following figure shows a typical organization of the logs: + + _________________________________________________________________________ + | Summary | regular file | file | ... | ifile | cpfile | sufile | DAT |SR| + |_blocks__|_or_directory_|_______|_____|_______|________|________|_____|__| + + +To stride over segment boundaries, this sequence of files may be split +into multiple logs. The sequence of logs that should be treated as +logically one log, is delimited with flags marked in the segment +summary. The recovery code of nilfs2 looks this boundary information +to ensure atomicity of updates. + +The super root block is inserted for every checkpoints. It includes +three special inodes, inodes for the DAT, cpfile, and sufile. Inodes +of regular files, directories, symlinks and other special files, are +included in the ifile. The inode of ifile itself is included in the +corresponding checkpoint entry in the cpfile. Thus, the hierarchy +among NILFS2 files can be depicted as follows: + + Super block (SB) + | + v + Super root block (the latest cno=xx) + |-- DAT + |-- sufile + `-- cpfile + |-- ifile (cno=c1) + |-- ifile (cno=c2) ---- file (ino=i1) + : : |-- file (ino=i2) + `-- ifile (cno=xx) |-- file (ino=i3) + : : + `-- file (ino=yy) + ( regular file, directory, or symlink ) + +For detail on the format of each file, please see include/linux/nilfs2_fs.h. diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt new file mode 100644 index 000000000000..dcf833587162 --- /dev/null +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -0,0 +1,71 @@ +POHMELFS: Parallel Optimized Host Message Exchange Layered File System. + + Evgeniy Polyakov <zbr@ioremap.net> + +Homepage: http://www.ioremap.net/projects/pohmelfs + +POHMELFS first began as a network filesystem with coherent local data and +metadata caches but is now evolving into a parallel distributed filesystem. + +Main features of this FS include: + * Locally coherent cache for data and metadata with (potentially) byte-range locks. + Since all Linux filesystems lock the whole inode during writing, algorithm + is very simple and does not use byte-ranges, although they are sent in + locking messages. + * Completely async processing of all events except creation of hard and symbolic + links, and rename events. + Object creation and data reading and writing are processed asynchronously. + * Flexible object architecture optimized for network processing. + Ability to create long paths to objects and remove arbitrarily huge + directories with a single network command. + (like removing the whole kernel tree via a single network command). + * Very high performance. + * Fast and scalable multithreaded userspace server. Being in userspace it works + with any underlying filesystem and still is much faster than async in-kernel NFS one. + * Client is able to switch between different servers (if one goes down, client + automatically reconnects to second and so on). + * Transactions support. Full failover for all operations. + Resending transactions to different servers on timeout or error. + * Read request (data read, directory listing, lookup requests) balancing between multiple servers. + * Write requests are replicated to multiple servers and completed only when all of them are acked. + * Ability to add and/or remove servers from the working set at run-time. + * Strong authentification and possible data encryption in network channel. + * Extended attributes support. + +POHMELFS is based on transactions, which are potentially long-standing objects that live +in the client's memory. Each transaction contains all the information needed to process a given +command (or set of commands, which is frequently used during data writing: single transactions +can contain creation and data writing commands). Transactions are committed by all the servers +to which they are sent and, in case of failures, are eventually resent or dropped with an error. +For example, reading will return an error if no servers are available. + +POHMELFS uses a asynchronous approach to data processing. Courtesy of transactions, it is +possible to detach replies from requests and, if the command requires data to be received, the +caller sleeps waiting for it. Thus, it is possible to issue multiple read commands to different +servers and async threads will pick up replies in parallel, find appropriate transactions in the +system and put the data where it belongs (like the page or inode cache). + +The main feature of POHMELFS is writeback data and the metadata cache. +Only a few non-performance critical operations use the write-through cache and +are synchronous: hard and symbolic link creation, and object rename. Creation, +removal of objects and data writing are asynchronous and are sent to +the server during system writeback. Only one writer at a time is allowed for any +given inode, which is guarded by an appropriate locking protocol. +Because of this feature, POHMELFS is extremely fast at metadata intensive +workloads and can fully utilize the bandwidth to the servers when doing bulk +data transfers. + +POHMELFS clients operate with a working set of servers and are capable of balancing read-only +operations (like lookups or directory listings) between them according to IO priorities. +Administrators can add or remove servers from the set at run-time via special commands (described +in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected +with write permission turned on. IO priority and permissions can be changed in run-time. + +POHMELFS is capable of full data channel encryption and/or strong crypto hashing. +One can select any kernel supported cipher, encryption mode, hash type and operation mode +(hmac or digest). It is also possible to use both or neither (default). Crypto configuration +is checked during mount time and, if the server does not support it, appropriate capabilities +will be disabled or mount will fail (if 'crypto_fail_unsupported' mount option is specified). +Crypto performance heavily depends on the number of crypto threads, which asynchronously perform +crypto operations and send the resulting data to server or submit it up the stack. This number +can be controlled via a mount option. diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt new file mode 100644 index 000000000000..db2e41393626 --- /dev/null +++ b/Documentation/filesystems/pohmelfs/info.txt @@ -0,0 +1,99 @@ +POHMELFS usage information. + +Mount options. +All but index, number of crypto threads and maximum IO size can changed via remount. + +idx=%u + Each mountpoint is associated with a special index via this option. + Administrator can add or remove servers from the given index, so all mounts, + which were attached to it, are updated. + Default it is 0. + +trans_scan_timeout=%u + This timeout, expressed in milliseconds, specifies time to scan transaction + trees looking for stale requests, which have to be resent, or if number of + retries exceed specified limit, dropped with error. + Default is 5 seconds. + +drop_scan_timeout=%u + Internal timeout, expressed in milliseconds, which specifies how frequently + inodes marked to be dropped are freed. It also specifies how frequently + the system checks that servers have to be added or removed from current working set. + Default is 1 second. + +wait_on_page_timeout=%u + Number of milliseconds to wait for reply from remote server for data reading command. + If this timeout is exceeded, reading returns an error. + Default is 5 seconds. + +trans_retries=%u + This is the number of times that a transaction will be resent to a server that did + not answer for the last @trans_scan_timeout milliseconds. + When the number of resends exceeds this limit, the transaction is completed with error. + Default is 5 resends. + +crypto_thread_num=%u + Number of crypto processing threads. Threads are used both for RX and TX traffic. + Default is 2, or no threads if crypto operations are not supported. + +trans_max_pages=%u + Maximum number of pages in a single transaction. This parameter also controls + the number of pages, allocated for crypto processing (each crypto thread has + pool of pages, the number of which is equal to 'trans_max_pages'. + Default is 100 pages. + +crypto_fail_unsupported + If specified, mount will fail if the server does not support requested crypto operations. + By default mount will disable non-matching crypto operations. + +mcache_timeout=%u + Maximum number of milliseconds to wait for the mcache objects to be processed. + Mcache includes locks (given lock should be granted by server), attributes (they should be + fully received in the given timeframe). + Default is 5 seconds. + +Usage examples. + +Add server server1.net:1025 into the working set with index $idx +with appropriate hash algorithm and key file and cipher algorithm, mode and key file: +$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key + +Mount filesystem with given index $idx to /mnt mountpoint. +Client will connect to all servers specified in the working set via previous command: +mount -t pohmel -o idx=$idx q /mnt + +Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw): +$cfg A modify -a server1.net -p 1025 -i $idx -I 1 + +Change IO priority to 123 (node with the highest priority gets read requests). +$cfg A modify -a server1.net -p 1025 -i $idx -P 123 + +One can check currect status of all connections in the mountstats file: +# cat /proc/$PID/mountstats +... +device none mounted on /mnt with fstype pohmel +idx addr(:port) socket_type protocol active priority permissions +0 server1.net:1026 1 6 1 250 1 +0 server2.net:1025 1 6 1 123 3 + +Server installation. + +Creating a server, which listens at port 1025 and 0.0.0.0 address. +Working root directory (note, that server chroots there, so you have to have appropriate permissions) +is set to /mnt, server will negotiate hash/cipher with client, in case client requested it, there +are appropriate key files. +Number of working threads is set to 10. + +# ./fserver -a 0.0.0.0 -p 1025 -r /mnt -w 10 -K hash_key -k cipher_key + + -A 6 - listen on ipv6 address. Default: Disabled. + -r root - path to root directory. Default: /tmp. + -a addr - listen address. Default: 0.0.0.0. + -p port - listen port. Default: 1025. + -w workers - number of workers per connected client. Default: 1. + -K file - hash key size. Default: none. + -k file - cipher key size. Default: none. + -h - this help. + +Number of worker threads specifies how many workers will be created for each client. +Bulk single-client transafers usually are better handled with smaller number (like 1-3). diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt new file mode 100644 index 000000000000..40ea6c295afb --- /dev/null +++ b/Documentation/filesystems/pohmelfs/network_protocol.txt @@ -0,0 +1,227 @@ +POHMELFS network protocol. + +Basic structure used in network communication is following command: + +struct netfs_cmd +{ + __u16 cmd; /* Command number */ + __u16 csize; /* Attached crypto information size */ + __u16 cpad; /* Attached padding size */ + __u16 ext; /* External flags */ + __u32 size; /* Size of the attached data */ + __u32 trans; /* Transaction id */ + __u64 id; /* Object ID to operate on. Used for feedback.*/ + __u64 start; /* Start of the object. */ + __u64 iv; /* IV sequence */ + __u8 data[0]; +}; + +Commands can be embedded into transaction command (which in turn has own command), +so one can extend protocol as needed without breaking backward compatibility as long +as old commands are supported. All string lengths include tail 0 byte. + +All commans are transfered over the network in big-endian. CPU endianess is used at the end peers. + +@cmd - command number, which specifies command to be processed. Following + commands are used currently: + + NETFS_READDIR = 1, /* Read directory for given inode number */ + NETFS_READ_PAGE, /* Read data page from the server */ + NETFS_WRITE_PAGE, /* Write data page to the server */ + NETFS_CREATE, /* Create directory entry */ + NETFS_REMOVE, /* Remove directory entry */ + NETFS_LOOKUP, /* Lookup single object */ + NETFS_LINK, /* Create a link */ + NETFS_TRANS, /* Transaction */ + NETFS_OPEN, /* Open intent */ + NETFS_INODE_INFO, /* Metadata cache coherency synchronization message */ + NETFS_PAGE_CACHE, /* Page cache invalidation message */ + NETFS_READ_PAGES, /* Read multiple contiguous pages in one go */ + NETFS_RENAME, /* Rename object */ + NETFS_CAPABILITIES, /* Capabilities of the client, for example supported crypto */ + NETFS_LOCK, /* Distributed lock message */ + NETFS_XATTR_SET, /* Set extended attribute */ + NETFS_XATTR_GET, /* Get extended attribute */ + +@ext - external flags. Used by different commands to specify some extra arguments + like partial size of the embedded objects or creation flags. + +@size - size of the attached data. For NETFS_READ_PAGE and NETFS_READ_PAGES no data is attached, + but size of the requested data is incorporated here. It does not include size of the command + header (struct netfs_cmd) itself. + +@id - id of the object this command operates on. Each command can use it for own purpose. + +@start - start of the object this command operates on. Each command can use it for own purpose. + +@csize, @cpad - size and padding size of the (attached if needed) crypto information. + +Command specifications. + +@NETFS_READDIR +This command is used to sync content of the remote dir to the client. + +@ext - length of the path to object. +@size - the same. +@id - local inode number of the directory to read. +@start - zero. + + +@NETFS_READ_PAGE +This command is used to read data from remote server. +Data size does not exceed local page cache size. + +@id - inode number. +@start - first byte offset. +@size - number of bytes to read plus length of the path to object. +@ext - object path length. + + +@NETFS_CREATE +Used to create object. +It does not require that all directories on top of the object were +already created, it will create them automatically. Each object has +associated @netfs_path_entry data structure, which contains creation +mode (permissions and type) and length of the name as long as name itself. + +@start - 0 +@size - size of the all data structures needed to create a path +@id - local inode number +@ext - 0 + + +@NETFS_REMOVE +Used to remove object. + +@ext - length of the path to object. +@size - the same. +@id - local inode number. +@start - zero. + + +@NETFS_LOOKUP +Lookup information about object on server. + +@ext - length of the path to object. +@size - the same. +@id - local inode number of the directory to look object in. +@start - local inode number of the object to look at. + + +@NETFS_LINK +Create hard of symlink. +Command is sent as "object_path|target_path". + +@size - size of the above string. +@id - parent local inode number. +@start - 1 for symlink, 0 for hardlink. +@ext - size of the "object_path" above. + + +@NETFS_TRANS +Transaction header. + +@size - incorporates all embedded command sizes including theirs header sizes. +@start - transaction generation number - unique id used to find transaction. +@ext - transaction flags. Unused at the moment. +@id - 0. + + +@NETFS_OPEN +Open intent for given transaction. + +@id - local inode number. +@start - 0. +@size - path length to the object. +@ext - open flags (O_RDWR and so on). + + +@NETFS_INODE_INFO +Metadata update command. +It is sent to servers when attributes of the object are changed and received +when data or metadata were updated. It operates with the following structure: + +struct netfs_inode_info +{ + unsigned int mode; + unsigned int nlink; + unsigned int uid; + unsigned int gid; + unsigned int blocksize; + unsigned int padding; + __u64 ino; + __u64 blocks; + __u64 rdev; + __u64 size; + __u64 version; +}; + +It effectively mirrors stat(2) returned data. + + +@ext - path length to the object. +@size - the same plus size of the netfs_inode_info structure. +@id - local inode number. +@start - 0. + + +@NETFS_PAGE_CACHE +Command is only received by clients. It contains information about +page to be marked as not up-to-date. + +@id - client's inode number. +@start - last byte of the page to be invalidated. If it is not equal to + current inode size, it will be vmtruncated(). +@size - 0 +@ext - 0 + + +@NETFS_READ_PAGES +Used to read multiple contiguous pages in one go. + +@start - first byte of the contiguous region to read. +@size - contains of two fields: lower 8 bits are used to represent page cache shift + used by client, another 3 bytes are used to get number of pages. +@id - local inode number. +@ext - path length to the object. + + +@NETFS_RENAME +Used to rename object. +Attached data is formed into following string: "old_path|new_path". + +@id - local inode number. +@start - parent inode number. +@size - length of the above string. +@ext - length of the old path part. + + +@NETFS_CAPABILITIES +Used to exchange crypto capabilities with server. +If crypto capabilities are not supported by server, then client will disable it +or fail (if 'crypto_fail_unsupported' mount options was specified). + +@id - superblock index. Used to specify crypto information for group of servers. +@size - size of the attached capabilities structure. +@start - 0. +@size - 0. +@scsize - 0. + +@NETFS_LOCK +Used to send lock request/release messages. Although it sends byte range request +and is capable of flushing pages based on that, it is not used, since all Linux +filesystems lock the whole inode. + +@id - lock generation number. +@start - start of the locked range. +@size - size of the locked range. +@ext - lock type: read/write. Not used actually. 15'th bit is used to determine, + if it is lock request (1) or release (0). + +@NETFS_XATTR_SET +@NETFS_XATTR_GET +Used to set/get extended attributes for given inode. +@id - attribute generation number or xattr setting type +@start - size of the attribute (request or attached) +@size - name length, path len and data size for given attribute +@ext - path length for given object diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index deeeed0faa8f..f49eecf2e573 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -277,8 +277,7 @@ or bottom half). unfreeze_fs: called when VFS is unlocking a filesystem and making it writable again. - statfs: called when the VFS needs to get filesystem statistics. This - is called with the kernel lock held + statfs: called when the VFS needs to get filesystem statistics. remount_fs: called when the filesystem is remounted. This is called with the kernel lock held diff --git a/Documentation/hwmon/g760a b/Documentation/hwmon/g760a new file mode 100644 index 000000000000..e032eeb75629 --- /dev/null +++ b/Documentation/hwmon/g760a @@ -0,0 +1,36 @@ +Kernel driver g760a +=================== + +Supported chips: + * Global Mixed-mode Technology Inc. G760A + Prefix: 'g760a' + Datasheet: Publicly available at the GMT website + http://www.gmt.com.tw/datasheet/g760a.pdf + +Author: Herbert Valerio Riedel <hvr@gnu.org> + +Description +----------- + +The GMT G760A Fan Speed PWM Controller is connected directly to a fan +and performs closed-loop control of the fan speed. + +The fan speed is programmed by setting the period via 'pwm1' of two +consecutive speed pulses. The period is defined in terms of clock +cycle counts of an assumed 32kHz clock source. + +Setting a period of 0 stops the fan; setting the period to 255 sets +fan to maximum speed. + +The measured fan rotation speed returned via 'fan1_input' is derived +from the measured speed pulse period by assuming again a 32kHz clock +source and a 2 pulse-per-revolution fan. + +The 'alarms' file provides access to the two alarm bits provided by +the G760A chip's status register: Bit 0 is set when the actual fan +speed differs more than 20% with respect to the programmed fan speed; +bit 1 is set when fan speed is below 1920 RPM. + +The g760a driver will not update its values more frequently than every +other second; reading them more often will do no harm, but will return +'old' values. diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt index 864ff3283780..6d40f00b358c 100644 --- a/Documentation/infiniband/ipoib.txt +++ b/Documentation/infiniband/ipoib.txt @@ -24,6 +24,49 @@ Partitions and P_Keys The P_Key for any interface is given by the "pkey" file, and the main interface for a subinterface is in "parent." +Datagram vs Connected modes + + The IPoIB driver supports two modes of operation: datagram and + connected. The mode is set and read through an interface's + /sys/class/net/<intf name>/mode file. + + In datagram mode, the IB UD (Unreliable Datagram) transport is used + and so the interface MTU has is equal to the IB L2 MTU minus the + IPoIB encapsulation header (4 bytes). For example, in a typical IB + fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes. + + In connected mode, the IB RC (Reliable Connected) transport is used. + Connected mode is to takes advantage of the connected nature of the + IB transport and allows an MTU up to the maximal IP packet size of + 64K, which reduces the number of IP packets needed for handling + large UDP datagrams, TCP segments, etc and increases the performance + for large messages. + + In connected mode, the interface's UD QP is still used for multicast + and communication with peers that don't support connected mode. In + this case, RX emulation of ICMP PMTU packets is used to cause the + networking stack to use the smaller UD MTU for these neighbours. + +Stateless offloads + + If the IB HW supports IPoIB stateless offloads, IPoIB advertises + TCP/IP checksum and/or Large Send (LSO) offloading capability to the + network stack. + + Large Receive (LRO) offloading is also implemented and may be turned + on/off using ethtool calls. Currently LRO is supported only for + checksum offload capable devices. + + Stateless offloads are supported only in datagram mode. + +Interrupt moderation + + If the underlying IB device supports CQ event moderation, one can + use ethtool to set interrupt mitigation parameters and thus reduce + the overhead incurred by handling interrupts. The main code path of + IPoIB doesn't use events for TX completion signaling so only RX + moderation is supported. + Debugging Information By compiling the IPoIB driver with CONFIG_INFINIBAND_IPOIB_DEBUG set @@ -55,3 +98,5 @@ References http://ietf.org/rfc/rfc4391.txt IP over InfiniBand (IPoIB) Architecture (RFC 4392) http://ietf.org/rfc/rfc4392.txt + IP over InfiniBand: Connected Mode (RFC 4755) + http://ietf.org/rfc/rfc4755.txt diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/bcm5974.txt new file mode 100644 index 000000000000..5e22dcf6d48d --- /dev/null +++ b/Documentation/input/bcm5974.txt @@ -0,0 +1,65 @@ +BCM5974 Driver (bcm5974) +------------------------ + Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se> + +The USB initialization and package decoding was made by Scott Shawcroft as +part of the touchd user-space driver project: + Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) + +The BCM5974 driver is based on the appletouch driver: + Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + Copyright (C) 2005 Stelian Pop (stelian@popies.net) + Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) + Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) + +This driver adds support for the multi-touch trackpad on the new Apple +Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on +those computers, and integrates well with the synaptics driver of the Xorg +system. + +Known to work on Macbook Air, Macbook Pro Penryn and the new unibody +Macbook 5 and Macbook Pro 5. + +Usage +----- + +The driver loads automatically for the supported usb device ids, and +becomes available both as an event device (/dev/input/event*) and as a +mouse via the mousedev driver (/dev/input/mice). + +USB Race +-------- + +The Apple multi-touch trackpads report both mouse and keyboard events via +different interfaces of the same usb device. This creates a race condition +with the HID driver, which, if not told otherwise, will find the standard +HID mouse and keyboard, and claim the whole device. To remedy, the usb +product id must be listed in the mouse_ignore list of the hid driver. + +Debug output +------------ + +To ease the development for new hardware version, verbose packet output can +be switched on with the debug kernel module parameter. The range [1-9] +yields different levels of verbosity. Example (as root): + +echo -n 9 > /sys/module/bcm5974/parameters/debug + +tail -f /var/log/debug + +echo -n 0 > /sys/module/bcm5974/parameters/debug + +Trivia +------ + +The driver was developed at the ubuntu forums in June 2008 [1], and now has +a more permanent home at bitmath.org [2]. + +Links +----- + +[1] http://ubuntuforums.org/showthread.php?t=840040 +[2] http://http://bitmath.org/code/ diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt new file mode 100644 index 000000000000..9f09557aea39 --- /dev/null +++ b/Documentation/input/multi-touch-protocol.txt @@ -0,0 +1,140 @@ +Multi-touch (MT) Protocol +------------------------- + Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se> + + +Introduction +------------ + +In order to utilize the full power of the new multi-touch devices, a way to +report detailed finger data to user space is needed. This document +describes the multi-touch (MT) protocol which allows kernel drivers to +report details for an arbitrary number of fingers. + + +Usage +----- + +Anonymous finger details are sent sequentially as separate packets of ABS +events. Only the ABS_MT events are recognized as part of a finger +packet. The end of a packet is marked by calling the input_mt_sync() +function, which generates a SYN_MT_REPORT event. The end of multi-touch +transfer is marked by calling the usual input_sync() function. + +A set of ABS_MT events with the desired properties is defined. The events +are divided into categories, to allow for partial implementation. The +minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and +ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the +device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size +of the approaching finger. Anisotropy and direction may be specified with +ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with +more granular information may specify general shapes as blobs, i.e., as a +sequence of rectangular shapes grouped together by an +ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify +whether the touching tool is a finger or a pen or something else. + + +Event Semantics +--------------- + +The word "contact" is used to describe a tool which is in direct contact +with the surface. A finger, a pen or a rubber all classify as contacts. + +ABS_MT_TOUCH_MAJOR + +The length of the major axis of the contact. The length should be given in +surface units. If the surface has an X times Y resolution, the largest +possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal. + +ABS_MT_TOUCH_MINOR + +The length, in surface units, of the minor axis of the contact. If the +contact is circular, this event can be omitted. + +ABS_MT_WIDTH_MAJOR + +The length, in surface units, of the major axis of the approaching +tool. This should be understood as the size of the tool itself. The +orientation of the contact and the approaching tool are assumed to be the +same. + +ABS_MT_WIDTH_MINOR + +The length, in surface units, of the minor axis of the approaching +tool. Omit if circular. + +The above four values can be used to derive additional information about +the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates +the notion of pressure. The fingers of the hand and the palm all have +different characteristic widths [1]. + +ABS_MT_ORIENTATION + +The orientation of the ellipse. The value should describe half a revolution +clockwise around the touch center. The scale of the value is arbitrary, but +zero should be returned for an ellipse aligned along the Y axis of the +surface. As an example, an index finger placed straight onto the axis could +return zero orientation, something negative when twisted to the left, and +something positive when twisted to the right. This value can be omitted if +the touching object is circular, or if the information is not available in +the kernel driver. + +ABS_MT_POSITION_X + +The surface X coordinate of the center of the touching ellipse. + +ABS_MT_POSITION_Y + +The surface Y coordinate of the center of the touching ellipse. + +ABS_MT_TOOL_TYPE + +The type of approaching tool. A lot of kernel drivers cannot distinguish +between different tool types, such as a finger or a pen. In such cases, the +event should be omitted. The protocol currently supports MT_TOOL_FINGER and +MT_TOOL_PEN [2]. + +ABS_MT_BLOB_ID + +The BLOB_ID groups several packets together into one arbitrarily shaped +contact. This is a low-level anonymous grouping, and should not be confused +with the high-level contactID, explained below. Most kernel drivers will +not have this capability, and can safely omit the event. + + +Finger Tracking +--------------- + +The kernel driver should generate an arbitrary enumeration of the set of +anonymous contacts currently on the surface. The order in which the packets +appear in the event stream is not important. + +The process of finger tracking, i.e., to assign a unique contactID to each +initiated contact on the surface, is left to user space; preferably the +multi-touch X driver [3]. In that driver, the contactID stays the same and +unique until the contact vanishes (when the finger leaves the surface). The +problem of assigning a set of anonymous fingers to a set of identified +fingers is a euclidian bipartite matching problem at each event update, and +relies on a sufficiently rapid update rate. + +Notes +----- + +In order to stay compatible with existing applications, the data +reported in a finger packet must not be recognized as single-touch +events. In addition, all finger data must bypass input filtering, +since subsequent events of the same type refer to different fingers. + +The first kernel driver to utilize the MT protocol is the bcm5974 driver, +where examples can be found. + +[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the +difference between the contact position and the approaching tool position +could be used to derive tilt. +[2] The list can of course be extended. +[3] The multi-touch X driver is currently in the prototyping stage. At the +time of writing (April 2009), the MT protocol is not yet merged, and the +prototype implements finger matching, basic mouse support and two-finger +scrolling. The project aims at improving the quality of current multi-touch +functionality available in the synaptics X driver, and in addition +implement more advanced gestures. diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt new file mode 100644 index 000000000000..435102a26d96 --- /dev/null +++ b/Documentation/input/rotary-encoder.txt @@ -0,0 +1,101 @@ +rotary-encoder - a generic driver for GPIO connected devices +Daniel Mack <daniel@caiaq.de>, Feb 2009 + +0. Function +----------- + +Rotary encoders are devices which are connected to the CPU or other +peripherals with two wires. The outputs are phase-shifted by 90 degrees +and by triggering on falling and rising edges, the turn direction can +be determined. + +The phase diagram of these two outputs look like this: + + _____ _____ _____ + | | | | | | + Channel A ____| |_____| |_____| |____ + + : : : : : : : : : : : : + __ _____ _____ _____ + | | | | | | | + Channel B |_____| |_____| |_____| |__ + + : : : : : : : : : : : : + Event a b c d a b c d a b c d + + |<-------->| + one step + + +For more information, please see + http://en.wikipedia.org/wiki/Rotary_encoder + + +1. Events / state machine +------------------------- + +a) Rising edge on channel A, channel B in low state + This state is used to recognize a clockwise turn + +b) Rising edge on channel B, channel A in high state + When entering this state, the encoder is put into 'armed' state, + meaning that there it has seen half the way of a one-step transition. + +c) Falling edge on channel A, channel B in high state + This state is used to recognize a counter-clockwise turn + +d) Falling edge on channel B, channel A in low state + Parking position. If the encoder enters this state, a full transition + should have happend, unless it flipped back on half the way. The + 'armed' state tells us about that. + +2. Platform requirements +------------------------ + +As there is no hardware dependent call in this driver, the platform it is +used with must support gpiolib. Another requirement is that IRQs must be +able to fire on both edges. + + +3. Board integration +-------------------- + +To use this driver in your system, register a platform_device with the +name 'rotary-encoder' and associate the IRQs and some specific platform +data with it. + +struct rotary_encoder_platform_data is declared in +include/linux/rotary-encoder.h and needs to be filled with the number of +steps the encoder has and can carry information about externally inverted +signals (because of used invertig buffer or other reasons). + +Because GPIO to IRQ mapping is platform specific, this information must +be given in seperately to the driver. See the example below. + +---------<snip>--------- + +/* board support file example */ + +#include <linux/input.h> +#include <linux/rotary_encoder.h> + +#define GPIO_ROTARY_A 1 +#define GPIO_ROTARY_B 2 + +static struct rotary_encoder_platform_data my_rotary_encoder_info = { + .steps = 24, + .axis = ABS_X, + .gpio_a = GPIO_ROTARY_A, + .gpio_b = GPIO_ROTARY_B, + .inverted_a = 0, + .inverted_b = 0, +}; + +static struct platform_device rotary_encoder_device = { + .name = "rotary-encoder", + .id = 0, + .dev = { + .platform_data = &my_rotary_encoder_info, + } +}; + diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX index 9fee5f2e5c62..5a2d69989a8c 100644 --- a/Documentation/isdn/00-INDEX +++ b/Documentation/isdn/00-INDEX @@ -2,8 +2,14 @@ - this file (info on ISDN implementation for Linux) CREDITS - list of the kind folks that brought you this stuff. +HiSax.cert + - information about the ITU approval certification of the HiSax driver. INTERFACE - - description of Linklevel and Hardwarelevel ISDN interface. + - description of isdn4linux Link Level and Hardware Level interfaces. +INTERFACE.fax + - description of the fax subinterface of isdn4linux. +INTERFACE.CAPI + - description of kernel CAPI Link Level to Hardware Level interface. README - general info on what you need and what to do for Linux ISDN. README.FAQ @@ -12,6 +18,8 @@ README.audio - info for running audio over ISDN. README.fax - info for using Fax over ISDN. +README.gigaset + - info on the drivers for Siemens Gigaset ISDN adapters. README.icn - info on the ICN-ISDN-card and its driver. README.HiSax @@ -37,7 +45,8 @@ README.diversion README.sc - info on driver for Spellcaster cards. README.x25 - _ info for running X.25 over ISDN. + - info for running X.25 over ISDN. README.hysdn - - info on driver for Hypercope active HYSDN cards - + - info on driver for Hypercope active HYSDN cards +README.mISDN + - info on the Modular ISDN subsystem (mISDN). diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI new file mode 100644 index 000000000000..786d619b36e5 --- /dev/null +++ b/Documentation/isdn/INTERFACE.CAPI @@ -0,0 +1,213 @@ +Kernel CAPI Interface to Hardware Drivers +----------------------------------------- + +1. Overview + +From the CAPI 2.0 specification: +COMMON-ISDN-API (CAPI) is an application programming interface standard used +to access ISDN equipment connected to basic rate interfaces (BRI) and primary +rate interfaces (PRI). + +Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI +hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI +lingo) with Kernel CAPI to indicate their readiness to provide their service +to CAPI applications. CAPI applications also register with Kernel CAPI, +requesting association with a CAPI device. Kernel CAPI then dispatches the +application registration to an available device, forwarding it to the +corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both +directions between the application and the hardware driver. + +Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. +This standard is freely available from http://www.capi.org. + + +2. Driver and Device Registration + +CAPI drivers optionally register themselves with Kernel CAPI by calling the +Kernel CAPI function register_capi_driver() with a pointer to a struct +capi_driver. This structure must be filled with the name and revision of the +driver, and optionally a pointer to a callback function, add_card(). The +registration can be revoked by calling the function unregister_capi_driver() +with a pointer to the same struct capi_driver. + +CAPI drivers must register each of the ISDN devices they control with Kernel +CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a +struct capi_ctr before they can be used. This structure must be filled with +the names of the driver and controller, and a number of callback function +pointers which are subsequently used by Kernel CAPI for communicating with the +driver. The registration can be revoked by calling the function +detach_capi_ctr() with a pointer to the same struct capi_ctr. + +Before the device can be actually used, the driver must fill in the device +information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr +structure of the device, and signal its readiness by calling capi_ctr_ready(). +From then on, Kernel CAPI may call the registered callback functions for the +device. + +If the device becomes unusable for any reason (shutdown, disconnect ...), the +driver has to call capi_ctr_reseted(). This will prevent further calls to the +callback functions by Kernel CAPI. + + +3. Application Registration and Communication + +Kernel CAPI forwards registration requests from applications (calls to CAPI +operation CAPI_REGISTER) to an appropriate hardware driver by calling its +register_appl() callback function. A unique Application ID (ApplID, u16) is +allocated by Kernel CAPI and passed to register_appl() along with the +parameter structure provided by the application. This is analogous to the +open() operation on regular files or character devices. + +After a successful return from register_appl(), CAPI messages from the +application may be passed to the driver for the device via calls to the +send_message() callback function. The CAPI message to send is stored in the +data portion of an skb. Conversely, the driver may call Kernel CAPI's +capi_ctr_handle_message() function to pass a received CAPI message to Kernel +CAPI for forwarding to an application, specifying its ApplID. + +Deregistration requests (CAPI operation CAPI_RELEASE) from applications are +forwarded as calls to the release_appl() callback function, passing the same +ApplID as with register_appl(). After return from release_appl(), no CAPI +messages for that application may be passed to or from the device anymore. + + +4. Data Structures + +4.1 struct capi_driver + +This structure describes a Kernel CAPI driver itself. It is used in the +register_capi_driver() and unregister_capi_driver() functions, and contains +the following non-private fields, all to be set by the driver before calling +register_capi_driver(): + +char name[32] + the name of the driver, as a zero-terminated ASCII string +char revision[32] + the revision number of the driver, as a zero-terminated ASCII string +int (*add_card)(struct capi_driver *driver, capicardparams *data) + a callback function pointer (may be NULL) + + +4.2 struct capi_ctr + +This structure describes an ISDN device (controller) handled by a Kernel CAPI +driver. After registration via the attach_capi_ctr() function it is passed to +all controller specific lower layer interface and callback functions to +identify the controller to operate on. + +It contains the following non-private fields: + +- to be set by the driver before calling attach_capi_ctr(): + +struct module *owner + pointer to the driver module owning the device + +void *driverdata + an opaque pointer to driver specific data, not touched by Kernel CAPI + +char name[32] + the name of the controller, as a zero-terminated ASCII string + +char *driver_name + the name of the driver, as a zero-terminated ASCII string + +int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata) + (optional) pointer to a callback function for sending firmware and + configuration data to the device + +void (*reset_ctr)(struct capi_ctr *ctrlr) + pointer to a callback function for performing a reset on the device, + releasing all registered applications + +void (*register_appl)(struct capi_ctr *ctrlr, u16 applid, + capi_register_params *rparam) +void (*release_appl)(struct capi_ctr *ctrlr, u16 applid) + pointers to callback functions for registration and deregistration of + applications with the device + +u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb) + pointer to a callback function for sending a CAPI message to the + device + +char *(*procinfo)(struct capi_ctr *ctrlr) + pointer to a callback function returning the entry for the device in + the CAPI controller info table, /proc/capi/controller + +read_proc_t *ctr_read_proc + pointer to the read_proc callback function for the device's proc file + system entry, /proc/capi/controllers/<n>; will be called with a + pointer to the device's capi_ctr structure as the last (data) argument + +- to be filled in before calling capi_ctr_ready(): + +u8 manu[CAPI_MANUFACTURER_LEN] + value to return for CAPI_GET_MANUFACTURER + +capi_version version + value to return for CAPI_GET_VERSION + +capi_profile profile + value to return for CAPI_GET_PROFILE + +u8 serial[CAPI_SERIAL_LEN] + value to return for CAPI_GET_SERIAL + + +5. Lower Layer Interface Functions + +(declared in <linux/isdn/capilli.h>) + +void register_capi_driver(struct capi_driver *drvr) +void unregister_capi_driver(struct capi_driver *drvr) + register/unregister a driver with Kernel CAPI + +int attach_capi_ctr(struct capi_ctr *ctrlr) +int detach_capi_ctr(struct capi_ctr *ctrlr) + register/unregister a device (controller) with Kernel CAPI + +void capi_ctr_ready(struct capi_ctr *ctrlr) +void capi_ctr_reseted(struct capi_ctr *ctrlr) + signal controller ready/not ready + +void capi_ctr_suspend_output(struct capi_ctr *ctrlr) +void capi_ctr_resume_output(struct capi_ctr *ctrlr) + signal suspend/resume + +void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid, + struct sk_buff *skb) + pass a received CAPI message to Kernel CAPI + for forwarding to the specified application + + +6. Helper Functions and Macros + +Library functions (from <linux/isdn/capilli.h>): + +void capilib_new_ncci(struct list_head *head, u16 applid, + u32 ncci, u32 winsize) +void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci) +void capilib_release_appl(struct list_head *head, u16 applid) +void capilib_release(struct list_head *head) +void capilib_data_b3_conf(struct list_head *head, u16 applid, + u32 ncci, u16 msgid) +u16 capilib_data_b3_req(struct list_head *head, u16 applid, + u32 ncci, u16 msgid) + + +Macros to extract/set element values from/in a CAPI message header +(from <linux/isdn/capiutil.h>): + +Get Macro Set Macro Element (Type) + +CAPIMSG_LEN(m) CAPIMSG_SETLEN(m, len) Total Length (u16) +CAPIMSG_APPID(m) CAPIMSG_SETAPPID(m, applid) ApplID (u16) +CAPIMSG_COMMAND(m) CAPIMSG_SETCOMMAND(m,cmd) Command (u8) +CAPIMSG_SUBCOMMAND(m) CAPIMSG_SETSUBCOMMAND(m, cmd) Subcommand (u8) +CAPIMSG_CMD(m) - Command*256 + + Subcommand (u16) +CAPIMSG_MSGID(m) CAPIMSG_SETMSGID(m, msgid) Message Number (u16) + +CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI + (u32) +CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16) + diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index 55b2852904a4..02c0e9341dd8 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -61,24 +61,28 @@ GigaSet 307x Device Driver --------------------- 2.1. Modules ------- - To get the device working, you have to load the proper kernel module. You - can do this using - modprobe modulename - where modulename is ser_gigaset (M101), usb_gigaset (M105), or - bas_gigaset (direct USB connection to the base). + For the devices to work, the proper kernel modules have to be loaded. + This normally happens automatically when the system detects the USB + device (base, M105) or when the line discipline is attached (M101). It + can also be triggered manually using the modprobe(8) command, for example + for troubleshooting or to pass module parameters. The module ser_gigaset provides a serial line discipline N_GIGASET_M101 - which drives the device through the regular serial line driver. To use it, - run the Gigaset M101 daemon "gigasetm101d" (also available from - http://sourceforge.net/projects/gigaset307x/) with the device file of the - RS232 port to the M101 as an argument, for example: - gigasetm101d /dev/ttyS1 - This will open the device file, set its line discipline to N_GIGASET_M101, - and then sleep in the background, keeping the device open so that the - line discipline remains active. To deactivate it, kill the daemon, for - example with - killall gigasetm101d - before disconnecting the device. + which drives the device through the regular serial line driver. It must + be attached to the serial line to which the M101 is connected with the + ldattach(8) command (requires util-linux-ng release 2.14 or later), for + example: + ldattach GIGASET_M101 /dev/ttyS1 + This will open the device file, attach the line discipline to it, and + then sleep in the background, keeping the device open so that the line + discipline remains active. To deactivate it, kill the daemon, for example + with + killall ldattach + before disconnecting the device. To have this happen automatically at + system startup/shutdown on an LSB compatible system, create and activate + an appropriate LSB startup script /etc/init.d/gigaset. (The init name + 'gigaset' is officially assigned to this project by LANANA.) + Alternatively, just add the 'ldattach' command line to /etc/rc.local. 2.2. Device nodes for user space programs ------------------------------------ @@ -194,10 +198,11 @@ GigaSet 307x Device Driver operation (for wireless access to the base), but are needed for access to the M105's own configuration mode (registration to the base, baudrate and line format settings, device status queries) via the gigacontr - utility. Their use is disabled in the driver by default for safety - reasons but can be enabled by setting the kernel configuration option - "Support for undocumented USB requests" (GIGASET_UNDOCREQ) to "Y" and - recompiling. + utility. Their use is controlled by the kernel configuration option + "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you + encounter error code -ENOTTY when trying to use some features of the + M105, try setting that option to "y" via 'make {x,menu}config' and + recompiling the driver. 3. Troubleshooting @@ -228,6 +233,13 @@ GigaSet 307x Device Driver Solution: Select Unimodem mode for all DECT data adapters. (see section 2.4.) + Problem: + You want to configure your USB DECT data adapter (M105) but gigacontr + reports an error: "/dev/ttyGU0: Inappropriate ioctl for device". + Solution: + Recompile the usb_gigaset driver with the kernel configuration option + CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.) + 3.2. Telling the driver to provide more information ---------------------------------------------- Building the driver with the "Gigaset debugging" kernel configuration diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 51104f9194a5..d76cfd8712e1 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -40,10 +40,16 @@ This document describes the Linux kernel Makefiles. --- 6.7 Custom kbuild commands --- 6.8 Preprocessing linker scripts - === 7 Kbuild Variables - === 8 Makefile language - === 9 Credits - === 10 TODO + === 7 Kbuild syntax for exported headers + --- 7.1 header-y + --- 7.2 objhdr-y + --- 7.3 destination-y + --- 7.4 unifdef-y (deprecated) + + === 8 Kbuild Variables + === 9 Makefile language + === 10 Credits + === 11 TODO === 1 Overview @@ -310,6 +316,16 @@ more details, with real examples. #arch/m68k/fpsp040/Makefile ldflags-y := -x + subdir-ccflags-y, subdir-asflags-y + The two flags listed above are similar to ccflags-y and as-falgs-y. + The difference is that the subdir- variants has effect for the kbuild + file where tey are present and all subdirectories. + Options specified using subdir-* are added to the commandline before + the options specified using the non-subdir variants. + + Example: + subdir-ccflags-y := -Werror + CFLAGS_$@, AFLAGS_$@ CFLAGS_$@ and AFLAGS_$@ only apply to commands in current @@ -1143,8 +1159,69 @@ When kbuild executes, the following steps are followed (roughly): The kbuild infrastructure for *lds file are used in several architecture-specific files. +=== 7 Kbuild syntax for exported headers + +The kernel include a set of headers that is exported to userspace. +Many headers can be exported as-is but other headers requires a +minimal pre-processing before they are ready for user-space. +The pre-processing does: +- drop kernel specific annotations +- drop include of compiler.h +- drop all sections that is kernel internat (guarded by ifdef __KERNEL__) + +Each relevant directory contain a file name "Kbuild" which specify the +headers to be exported. +See subsequent chapter for the syntax of the Kbuild file. + + --- 7.1 header-y + + header-y specify header files to be exported. + + Example: + #include/linux/Kbuild + header-y += usb/ + header-y += aio_abi.h + + The convention is to list one file per line and + preferably in alphabetic order. + + header-y also specify which subdirectories to visit. + A subdirectory is identified by a trailing '/' which + can be seen in the example above for the usb subdirectory. + + Subdirectories are visited before their parent directories. + + --- 7.2 objhdr-y + + objhdr-y specifies generated files to be exported. + Generated files are special as they need to be looked + up in another directory when doing 'make O=...' builds. + + Example: + #include/linux/Kbuild + objhdr-y += version.h + + --- 7.3 destination-y + + When an architecture have a set of exported headers that needs to be + exported to a different directory destination-y is used. + destination-y specify the destination directory for all exported + headers in the file where it is present. + + Example: + #arch/xtensa/platforms/s6105/include/platform/Kbuild + destination-y := include/linux + + In the example above all exported headers in the Kbuild file + will be located in the directory "include/linux" when exported. + + + --- 7.4 unifdef-y (deprecated) + + unifdef-y is deprecated. A direct replacement is header-y. + -=== 7 Kbuild Variables +=== 8 Kbuild Variables The top Makefile exports the following variables: @@ -1206,7 +1283,7 @@ The top Makefile exports the following variables: INSTALL_MOD_STRIP will used as the option(s) to the strip command. -=== 8 Makefile language +=== 9 Makefile language The kernel Makefiles are designed to be run with GNU Make. The Makefiles use only the documented features of GNU Make, but they do use many @@ -1225,14 +1302,14 @@ time the left-hand side is used. There are some cases where "=" is appropriate. Usually, though, ":=" is the right choice. -=== 9 Credits +=== 10 Credits Original version made by Michael Elizabeth Chastain, <mailto:mec@shout.net> Updates by Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de> Updates by Sam Ravnborg <sam@ravnborg.org> Language QA by Jan Engelhardt <jengelh@gmx.de> -=== 10 TODO +=== 11 TODO - Describe how kbuild supports shipped files with _shipped. - Generating offset header files. diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 026ec7d57384..4d04572b6549 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants. Inside a struct description, you can use the "private:" and "public:" comment tags. Structure fields that are inside a "private:" area -are not listed in the generated output documentation. +are not listed in the generated output documentation. The "private:" +and "public:" tags must begin immediately following a "/*" comment +marker. They may optionally include comments between the ":" and the +ending "*/" marker. Example: @@ -283,7 +286,7 @@ Example: struct my_struct { int a; int b; -/* private: */ +/* private: internal use only */ int c; }; diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 421920897a37..e87bdbfbcc75 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus usbcore.blinkenlights=1 +Hyphens (dashes) and underscores are equivalent in parameter names, so + log_buf_len=1M print-fatal-signals=1 +can also be entered as + log-buf-len=1M print_fatal_signals=1 + + This document may not be entirely up to date and comprehensive. The command "modinfo -p ${modulename}" shows a current list of all parameters of a loadable module. Loadable modules, after being loaded into the running kernel, also @@ -50,6 +56,7 @@ parameter is applicable: ISAPNP ISA PnP code is enabled. ISDN Appropriate ISDN support is enabled. JOY Appropriate joystick support is enabled. + KMEMTRACE kmemtrace is enabled. LIBATA Libata driver is enabled LP Printer support is enabled. LOOP Loopback device support is enabled. @@ -133,7 +140,7 @@ and is between 256 and 4096 characters. It is defined in the file ./include/asm/setup.h as COMMAND_LINE_SIZE. - acpi= [HW,ACPI,X86-64,i386] + acpi= [HW,ACPI,X86] Advanced Configuration and Power Interface Format: { force | off | ht | strict | noirq | rsdt } force -- enable ACPI if default was off @@ -152,60 +159,6 @@ and is between 256 and 4096 characters. It is defined in the file 1,0: use 1st APIC table default: 0 - acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, - old_ordering, s4_nonvs } - See Documentation/power/video.txt for information on - s3_bios and s3_mode. - s3_beep is for debugging; it makes the PC's speaker beep - as soon as the kernel's real-mode entry point is called. - s4_nohwsig prevents ACPI hardware signature from being - used during resume from hibernation. - old_ordering causes the ACPI 1.0 ordering of the _PTS - control method, with respect to putting devices into - low power states, to be enforced (the ACPI 2.0 ordering - of _PTS is used by default). - s4_nonvs prevents the kernel from saving/restoring the - ACPI NVS memory during hibernation. - - acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode - Format: { level | edge | high | low } - - acpi_irq_balance [HW,ACPI] - ACPI will balance active IRQs - default in APIC mode - - acpi_irq_nobalance [HW,ACPI] - ACPI will not move active IRQs (default) - default in PIC mode - - acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for - use by PCI - Format: <irq>,<irq>... - - acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA - Format: <irq>,<irq>... - - acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT - - acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS - Format: To spoof as Windows 98: ="Microsoft Windows" - - acpi_osi= [HW,ACPI] Modify list of supported OS interface strings - acpi_osi="string1" # add string1 -- only one string - acpi_osi="!string2" # remove built-in string2 - acpi_osi= # disable all strings - - acpi_serialize [HW,ACPI] force serialization of AML methods - - acpi_skip_timer_override [HW,ACPI] - Recognize and ignore IRQ0/pin2 Interrupt Override. - For broken nForce2 BIOS resulting in XT-PIC timer. - acpi_use_timer_override [HW,ACPI] - Use timer override. For some broken Nvidia NF5 boards - that require a timer override, but don't have - HPET - acpi_backlight= [HW,ACPI] acpi_backlight=vendor acpi_backlight=video @@ -213,11 +166,6 @@ and is between 256 and 4096 characters. It is defined in the file (e.g. thinkpad_acpi, sony_acpi, etc.) instead of the ACPI video.ko driver. - acpi_display_output= [HW,ACPI] - acpi_display_output=vendor - acpi_display_output=video - See above. - acpi.debug_layer= [HW,ACPI,ACPI_DEBUG] acpi.debug_level= [HW,ACPI,ACPI_DEBUG] Format: <int> @@ -246,6 +194,41 @@ and is between 256 and 4096 characters. It is defined in the file unusable. The "log_buf_len" parameter may be useful if you need to capture more output. + acpi_display_output= [HW,ACPI] + acpi_display_output=vendor + acpi_display_output=video + See above. + + acpi_irq_balance [HW,ACPI] + ACPI will balance active IRQs + default in APIC mode + + acpi_irq_nobalance [HW,ACPI] + ACPI will not move active IRQs (default) + default in PIC mode + + acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA + Format: <irq>,<irq>... + + acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for + use by PCI + Format: <irq>,<irq>... + + acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT + + acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS + Format: To spoof as Windows 98: ="Microsoft Windows" + + acpi_osi= [HW,ACPI] Modify list of supported OS interface strings + acpi_osi="string1" # add string1 -- only one string + acpi_osi="!string2" # remove built-in string2 + acpi_osi= # disable all strings + + acpi_pm_good [X86] + Override the pmtimer bug detection: force the kernel + to assume that this machine's pmtimer latches its value + and always returns good values. + acpi.power_nocheck= [HW,ACPI] Format: 1/0 enable/disable the check of power state. On some bogus BIOS the _PSC object/_STA object of @@ -254,30 +237,57 @@ and is between 256 and 4096 characters. It is defined in the file power state again in power transition. 1 : disable the power state check - acpi_pm_good [X86-32,X86-64] - Override the pmtimer bug detection: force the kernel - to assume that this machine's pmtimer latches its value - and always returns good values. + acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode + Format: { level | edge | high | low } - agp= [AGP] - { off | try_unsupported } - off: disable AGP support - try_unsupported: try to drive unsupported chipsets - (may crash computer or cause data corruption) + acpi_serialize [HW,ACPI] force serialization of AML methods - enable_timer_pin_1 [i386,x86-64] - Enable PIN 1 of APIC timer - Can be useful to work around chipset bugs - (in particular on some ATI chipsets). - The kernel tries to set a reasonable default. + acpi_skip_timer_override [HW,ACPI] + Recognize and ignore IRQ0/pin2 Interrupt Override. + For broken nForce2 BIOS resulting in XT-PIC timer. - disable_timer_pin_1 [i386,x86-64] - Disable PIN 1 of APIC timer - Can be useful to work around chipset bugs. + acpi_sleep= [HW,ACPI] Sleep options + Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, + old_ordering, s4_nonvs } + See Documentation/power/video.txt for information on + s3_bios and s3_mode. + s3_beep is for debugging; it makes the PC's speaker beep + as soon as the kernel's real-mode entry point is called. + s4_nohwsig prevents ACPI hardware signature from being + used during resume from hibernation. + old_ordering causes the ACPI 1.0 ordering of the _PTS + control method, with respect to putting devices into + low power states, to be enforced (the ACPI 2.0 ordering + of _PTS is used by default). + s4_nonvs prevents the kernel from saving/restoring the + ACPI NVS memory during hibernation. + + acpi_use_timer_override [HW,ACPI] + Use timer override. For some broken Nvidia NF5 boards + that require a timer override, but don't have HPET + + acpi_enforce_resources= [ACPI] + { strict | lax | no } + Check for resource conflicts between native drivers + and ACPI OperationRegions (SystemIO and SystemMemory + only). IO ports and memory declared in ACPI might be + used by the ACPI subsystem in arbitrary AML code and + can interfere with legacy drivers. + strict (default): access to resources claimed by ACPI + is denied; legacy drivers trying to access reserved + resources will fail to bind to device using them. + lax: access to resources claimed by ACPI is allowed; + legacy drivers trying to access reserved resources + will bind successfully but a warning message is logged. + no: ACPI OperationRegions are not marked as reserved, + no further checks are performed. ad1848= [HW,OSS] Format: <io>,<irq>,<dma>,<dma2>,<type> + add_efi_memmap [EFI; X86] Include EFI memory map in + kernel's map of available physical RAM. + advansys= [HW,SCSI] See header of drivers/scsi/advansys.c. @@ -288,6 +298,12 @@ and is between 256 and 4096 characters. It is defined in the file Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq> See also header of sound/oss/aedsp16.c. + agp= [AGP] + { off | try_unsupported } + off: disable AGP support + try_unsupported: try to drive unsupported chipsets + (may crash computer or cause data corruption) + aha152x= [HW,SCSI] See Documentation/scsi/aha152x.txt. @@ -335,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file not play well with APC CPU idle - disable it if you have APC and your system crashes randomly. - apic= [APIC,i386] Advanced Programmable Interrupt Controller + apic= [APIC,X86-32] Advanced Programmable Interrupt Controller Change the output verbosity whilst booting Format: { quiet (default) | verbose | debug } Change the amount of debugging information output @@ -415,12 +431,6 @@ and is between 256 and 4096 characters. It is defined in the file possible to determine what the correct size should be. This option provides an override for these situations. - security= [SECURITY] Choose a security module to enable at boot. - If this boot parameter is not specified, only the first - security module asking for security registration will be - loaded. An invalid security module name will be treated - as if no module has been chosen. - capability.disable= [SECURITY] Disable capabilities. This would normally be used only if an alternative security model is to be @@ -487,29 +497,11 @@ and is between 256 and 4096 characters. It is defined in the file Also note the kernel might malfunction if you disable some critical bits. - code_bytes [IA32/X86_64] How many bytes of object code to print + code_bytes [X86] How many bytes of object code to print in an oops report. Range: 0 - 8192 Default: 64 - dma_debug=off If the kernel is compiled with DMA_API_DEBUG support - this option disables the debugging code at boot. - - dma_debug_entries=<number> - This option allows to tune the number of preallocated - entries for DMA-API debugging code. One entry is - required per DMA-API allocation. Use this if the - DMA-API debugging code disables itself because the - architectural default is too low. - - hpet= [X86-32,HPET] option to control HPET usage - Format: { enable (default) | disable | force | - verbose } - disable: disable HPET and use PIT instead - force: allow force enabled of undocumented chips (ICH4, - VIA, nVidia) - verbose: show contents of HPET registers during setup - com20020= [HW,NET] ARCnet - COM20020 chipset Format: <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]] @@ -553,23 +545,6 @@ and is between 256 and 4096 characters. It is defined in the file console=brl,ttyS0 For now, only VisioBraille is supported. - earlycon= [KNL] Output early console device and options. - uart[8250],io,<addr>[,options] - uart[8250],mmio,<addr>[,options] - Start an early, polled-mode console on the 8250/16550 - UART at the specified I/O port or MMIO address. - The options are the same as for ttyS, above. - - no_console_suspend - [HW] Never suspend the console - Disable suspending of consoles during suspend and - hibernate operations. Once disabled, debugging - messages can reach various consoles while the rest - of the system is being put to sleep (ie, while - debugging driver suspend/resume hooks). This may - not work reliably with all consoles, but is known - to work with serial and VGA consoles. - coredump_filter= [KNL] Change the default value for /proc/<pid>/coredump_filter. @@ -617,36 +592,22 @@ and is between 256 and 4096 characters. It is defined in the file debug_objects [KNL] Enable object debugging + no_debug_objects + [KNL] Disable object debugging + debugpat [X86] Enable PAT debugging decnet.addr= [HW,NET] Format: <area>[,<node>] See also Documentation/networking/decnet.txt. - vt.default_blu= [VT] - Format: <blue0>,<blue1>,<blue2>,...,<blue15> - Change the default blue palette of the console. - This is a 16-member array composed of values - ranging from 0-255. - - vt.default_grn= [VT] - Format: <green0>,<green1>,<green2>,...,<green15> - Change the default green palette of the console. - This is a 16-member array composed of values - ranging from 0-255. - - vt.default_red= [VT] - Format: <red0>,<red1>,<red2>,...,<red15> - Change the default red palette of the console. - This is a 16-member array composed of values - ranging from 0-255. - - vt.default_utf8= - [VT] - Format=<0|1> - Set system-wide default UTF-8 mode for all tty's. - Default is 1, i.e. UTF-8 mode is enabled for all - newly opened terminals. + default_hugepagesz= + [same as hugepagesz=] The size of the default + HugeTLB page size. This is the size represented by + the legacy /proc/ hugepages APIs, used for SHM, and + default size when mounting hugetlbfs filesystems. + Defaults to the default architecture's huge page size + if not specified. dhash_entries= [KNL] Set number of hash buckets for dentry cache. @@ -659,27 +620,9 @@ and is between 256 and 4096 characters. It is defined in the file Documentation/serial/digiepca.txt. disable_mtrr_cleanup [X86] - enable_mtrr_cleanup [X86] The kernel tries to adjust MTRR layout from continuous to discrete, to make X server driver able to add WB - entry later. This parameter enables/disables that. - - mtrr_chunk_size=nn[KMG] [X86] - used for mtrr cleanup. It is largest continous chunk - that could hold holes aka. UC entries. - - mtrr_gran_size=nn[KMG] [X86] - Used for mtrr cleanup. It is granularity of mtrr block. - Default is 1. - Large value could prevent small alignment from - using up MTRRs. - - mtrr_spare_reg_nr=n [X86] - Format: <integer> - Range: 0,7 : spare reg number - Default : 1 - Used for mtrr cleanup. It is spare mtrr entries number. - Set to 2 or more if your graphical card needs more. + entry later. This parameter disables that. disable_mtrr_trim [X86, Intel and AMD only] By default the kernel will trim any uncacheable @@ -687,13 +630,39 @@ and is between 256 and 4096 characters. It is defined in the file MTRR settings. This parameter disables that behavior, possibly causing your machine to run very slowly. + disable_timer_pin_1 [X86] + Disable PIN 1 of APIC timer + Can be useful to work around chipset bugs. + dmasound= [HW,OSS] Sound subsystem buffers + dma_debug=off If the kernel is compiled with DMA_API_DEBUG support, + this option disables the debugging code at boot. + + dma_debug_entries=<number> + This option allows to tune the number of preallocated + entries for DMA-API debugging code. One entry is + required per DMA-API allocation. Use this if the + DMA-API debugging code disables itself because the + architectural default is too low. + dscc4.setup= [NET] dtc3181e= [HW,SCSI] - earlyprintk= [X86-32,X86-64,SH,BLACKFIN] + dynamic_printk Enables pr_debug()/dev_dbg() calls if + CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. + These can also be switched on/off via + <debugfs>/dynamic_printk/modules + + earlycon= [KNL] Output early console device and options. + uart[8250],io,<addr>[,options] + uart[8250],mmio,<addr>[,options] + Start an early, polled-mode console on the 8250/16550 + UART at the specified I/O port or MMIO address. + The options are the same as for ttyS, above. + + earlyprintk= [X86,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] earlyprintk=dbgp @@ -728,12 +697,23 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/block/as-iosched.txt and Documentation/block/deadline-iosched.txt for details. - elfcorehdr= [IA64,PPC,SH,X86-32,X86_64] + elfcorehdr= [IA64,PPC,SH,X86] Specifies physical address of start of kernel core image elf header. Generally kexec loader will pass this option to capture kernel. See Documentation/kdump/kdump.txt for details. + enable_mtrr_cleanup [X86] + The kernel tries to adjust MTRR layout from continuous + to discrete, to make X server driver able to add WB + entry later. This parameter enables that. + + enable_timer_pin_1 [X86] + Enable PIN 1 of APIC timer + Can be useful to work around chipset bugs + (in particular on some ATI chipsets). + The kernel tries to set a reasonable default. + enforcing [SELINUX] Set initial enforcing status. Format: {"0" | "1"} See security/selinux/Kconfig help text. @@ -801,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file hashdist= [KNL,NUMA] Large hashes allocated during boot are distributed across NUMA nodes. Defaults on - for IA-64, off otherwise. + for 64bit NUMA, off otherwise. Format: 0 | 1 (for off | on) hcl= [IA-64] SGI's Hardware Graph compatibility layer @@ -821,6 +801,16 @@ and is between 256 and 4096 characters. It is defined in the file hisax= [HW,ISDN] See Documentation/isdn/README.HiSax. + hlt [BUGS=ARM,SH] + + hpet= [X86-32,HPET] option to control HPET usage + Format: { enable (default) | disable | force | + verbose } + disable: disable HPET and use PIT instead + force: allow force enabled of undocumented chips (ICH4, + VIA, nVidia) + verbose: show contents of HPET registers during setup + hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot. hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages. On x86-64 and powerpc, this option can be specified @@ -830,15 +820,6 @@ and is between 256 and 4096 characters. It is defined in the file (when the CPU supports the "pdpe1gb" cpuinfo flag) Note that 1GB pages can only be allocated at boot time using hugepages= and not freed afterwards. - default_hugepagesz= - [same as hugepagesz=] The size of the default - HugeTLB page size. This is the size represented by - the legacy /proc/ hugepages APIs, used for SHM, and - default size when mounting hugetlbfs filesystems. - Defaults to the default architecture's huge page size - if not specified. - - hlt [BUGS=ARM,SH] hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC) terminal devices. Valid values: 0..8 @@ -899,6 +880,9 @@ and is between 256 and 4096 characters. It is defined in the file idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed See Documentation/ide/ide.txt. + ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem + Claim all unknown PCI IDE storage controllers. + idle= [X86] Format: idle=poll, idle=mwait, idle=halt, idle=nomwait Poll forces a polling idle loop that can slightly @@ -914,9 +898,6 @@ and is between 256 and 4096 characters. It is defined in the file In such case C2/C3 won't be used again. idle=nomwait: Disable mwait for CPU C-states - ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem - Claim all unknown PCI IDE storage controllers. - ignore_loglevel [KNL] Ignore loglevel setting - this will print /all/ kernel messages to the console. Useful for debugging. @@ -950,25 +931,6 @@ and is between 256 and 4096 characters. It is defined in the file inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver Format: <irq> - inttest= [IA64] - - iomem= Disable strict checking of access to MMIO memory - strict regions from userspace. - relaxed - - iommu= [x86] - off - force - noforce - biomerge - panic - nopanic - merge - nomerge - forcesac - soft - - intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option on Enable intel iommu driver. @@ -992,7 +954,29 @@ and is between 256 and 4096 characters. It is defined in the file result in a hardware IOTLB flush operation as opposed to batching them for performance. - io_delay= [X86-32,X86-64] I/O delay method + inttest= [IA64] + + iomem= Disable strict checking of access to MMIO memory + strict regions from userspace. + relaxed + + iommu= [x86] + off + force + noforce + biomerge + panic + nopanic + merge + nomerge + forcesac + soft + + io7= [HW] IO7 for Marvel based alpha systems + See comment before marvel_specify_io7 in + arch/alpha/kernel/core_marvel.c. + + io_delay= [X86] I/O delay method 0x80 Standard port 0x80 based delay 0xed @@ -1002,10 +986,6 @@ and is between 256 and 4096 characters. It is defined in the file none No delay - io7= [HW] IO7 for Marvel based alpha systems - See comment before marvel_specify_io7 in - arch/alpha/kernel/core_marvel.c. - ip= [IP_PNP] See Documentation/filesystems/nfsroot.txt. @@ -1016,12 +996,6 @@ and is between 256 and 4096 characters. It is defined in the file ips= [HW,SCSI] Adaptec / IBM ServeRAID controller See header of drivers/scsi/ips.c. - ports= [IP_VS_FTP] IPVS ftp helper module - Default is 21. - Up to 8 (IP_VS_APP_MAX_PORTS) ports - may be specified. - Format: <port>,<port>.... - irqfixup [HW] When an interrupt is not handled search all handlers for it. Intended to get systems with badly broken @@ -1062,7 +1036,9 @@ and is between 256 and 4096 characters. It is defined in the file js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. - kernelcore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter + keepinitrd [HW,ARM] + + kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter specifies the amount of memory usable by the kernel for non-movable allocations. The requested amount is spread evenly throughout all nodes in the system. The @@ -1078,20 +1054,14 @@ and is between 256 and 4096 characters. It is defined in the file use the HighMem zone if it exists, and the Normal zone if it does not. - movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter - is similar to kernelcore except it specifies the - amount of memory used for migratable allocations. - If both kernelcore and movablecore is specified, - then kernelcore will be at *least* the specified - value but may be more. If movablecore on its own - is specified, the administrator must be careful - that the amount of memory usable for all allocations - is not too small. + kmemtrace.enable= [KNL,KMEMTRACE] Format: { yes | no } + Controls whether kmemtrace is enabled + at boot-time. - keepinitrd [HW,ARM] - - kstack=N [X86-32,X86-64] Print N words from the kernel stack - in oops dumps. + kmemtrace.subbufs=n [KNL,KMEMTRACE] Overrides the number of + subbufs kmemtrace's relay channel has. Set this + higher than default (KMEMTRACE_N_SUBBUFS in code) if + you experience buffer overruns. kgdboc= [HW] kgdb over consoles. Requires a tty driver that supports console polling. @@ -1102,6 +1072,9 @@ and is between 256 and 4096 characters. It is defined in the file Configure the RouterBoard 532 series on-chip Ethernet adapter MAC address. + kstack=N [X86] Print N words from the kernel stack + in oops dumps. + l2cr= [PPC] l3cr= [PPC] @@ -1109,7 +1082,7 @@ and is between 256 and 4096 characters. It is defined in the file lapic [X86-32,APIC] Enable the local APIC even if BIOS disabled it. - lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer + lapic_timer_c2_ok [X86,APIC] trust the local apic timer in C2 power state. libata.dma= [LIBATA] DMA control @@ -1247,9 +1220,8 @@ and is between 256 and 4096 characters. It is defined in the file (machvec) in a generic kernel. Example: machvec=hpzx1_swiotlb - max_loop= [LOOP] Maximum number of loopback devices that can - be mounted - Format: <1-256> + max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater + than or equal to this physical address is ignored. maxcpus= [SMP] Maximum number of processors that an SMP kernel should make use of. maxcpus=n : n >= 0 limits the @@ -1257,8 +1229,9 @@ and is between 256 and 4096 characters. It is defined in the file it is equivalent to "nosmp", which also disables the IO APIC. - max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater than - or equal to this physical address is ignored. + max_loop= [LOOP] Maximum number of loopback devices that can + be mounted + Format: <1-256> max_luns= [SCSI] Maximum number of LUNs to probe. Should be between 1 and 2^32-1. @@ -1294,7 +1267,7 @@ and is between 256 and 4096 characters. It is defined in the file [KNL,SH] Allow user to override the default size for per-device physically contiguous DMA buffers. - memmap=exactmap [KNL,X86-32,X86_64] Enable setting of an exact + memmap=exactmap [KNL,X86] Enable setting of an exact E820 memory map, as specified by the user. Such memmap=exactmap lines can be constructed based on BIOS output or other requirements. See the memmap=nn@ss @@ -1385,6 +1358,16 @@ and is between 256 and 4096 characters. It is defined in the file mousedev.yres= [MOUSE] Vertical screen resolution, used for devices reporting absolute coordinates, such as tablets + movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter + is similar to kernelcore except it specifies the + amount of memory used for migratable allocations. + If both kernelcore and movablecore is specified, + then kernelcore will be at *least* the specified + value but may be more. If movablecore on its own + is specified, the administrator must be careful + that the amount of memory usable for all allocations + is not too small. + mpu401= [HW,OSS] Format: <io>,<irq> @@ -1406,6 +1389,23 @@ and is between 256 and 4096 characters. It is defined in the file [HW] Make the MicroTouch USB driver use raw coordinates ('y', default) or cooked coordinates ('n') + mtrr_chunk_size=nn[KMG] [X86] + used for mtrr cleanup. It is largest continous chunk + that could hold holes aka. UC entries. + + mtrr_gran_size=nn[KMG] [X86] + Used for mtrr cleanup. It is granularity of mtrr block. + Default is 1. + Large value could prevent small alignment from + using up MTRRs. + + mtrr_spare_reg_nr=n [X86] + Format: <integer> + Range: 0,7 : spare reg number + Default : 1 + Used for mtrr cleanup. It is spare mtrr entries number. + Set to 2 or more if your graphical card needs more. + n2= [NET] SDL Inc. RISCom/N2 synchronous serial card NCR_D700= [HW,SCSI] @@ -1460,17 +1460,19 @@ and is between 256 and 4096 characters. It is defined in the file when a NMI is triggered. Format: [state][,regs][,debounce][,die] - nmi_watchdog= [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels + nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels Format: [panic,][num] Valid num: 0,1,2 0 - turn nmi_watchdog off 1 - use the IO-APIC timer for the NMI watchdog 2 - use the local APIC for the NMI watchdog using - a performance counter. Note: This will use one performance - counter and the local APIC's performance vector. - When panic is specified panic when an NMI watchdog timeout occurs. - This is useful when you use a panic=... timeout and need the box - quickly up again. + a performance counter. Note: This will use one + performance counter and the local APIC's performance + vector. + When panic is specified, panic when an NMI watchdog + timeout occurs. + This is useful when you use a panic=... timeout and + need the box quickly up again. Instead of 1 and 2 it is possible to use the following symbolic names: lapic and ioapic Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic @@ -1479,6 +1481,16 @@ and is between 256 and 4096 characters. It is defined in the file emulation library even if a 387 maths coprocessor is present. + no_console_suspend + [HW] Never suspend the console + Disable suspending of consoles during suspend and + hibernate operations. Once disabled, debugging + messages can reach various consoles while the rest + of the system is being put to sleep (ie, while + debugging driver suspend/resume hooks). This may + not work reliably with all consoles, but is known + to work with serial and VGA consoles. + noaliencache [MM, NUMA, SLAB] Disables the allocation of alien caches in the slab allocator. Saves per-node memory, but will impact performance. @@ -1493,17 +1505,19 @@ and is between 256 and 4096 characters. It is defined in the file nocache [ARM] + noclflush [BUGS=X86] Don't use the CLFLUSH instruction + nodelayacct [KNL] Disable per-task delay accounting nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects. nodsp [SH] Disable hardware DSP at boot time. - noefi [X86-32,X86-64] Disable EFI runtime services support. + noefi [X86] Disable EFI runtime services support. noexec [IA-64] - noexec [X86-32,X86-64] + noexec [X86] On X86-32 available only on PAE configured kernels. noexec=on: enable non-executable mappings (default) noexec=off: disable non-executable mappings @@ -1521,8 +1535,6 @@ and is between 256 and 4096 characters. It is defined in the file register save and restore. The kernel will only save legacy floating-point registers on task switch. - noclflush [BUGS=X86] Don't use the CLFLUSH instruction - nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or wfi(ARM) instruction doesn't work correctly and not to use it. This is also useful when using JTAG debugger. @@ -1546,10 +1558,12 @@ and is between 256 and 4096 characters. It is defined in the file Valid arguments: on, off Default: on + noiotrap [SH] Disables trapped I/O port accesses. + noirqdebug [X86-32] Disables the code which attempts to detect and disable unhandled interrupt sources. - no_timer_check [X86-32,X86_64,APIC] Disables the code which tests for + no_timer_check [X86,APIC] Disables the code which tests for broken timer IRQ sources. noisapnp [ISAPNP] Disables ISA PnP code. @@ -1565,12 +1579,6 @@ and is between 256 and 4096 characters. It is defined in the file nolapic_timer [X86-32,APIC] Do not use the local APIC timer. - nox2apic [X86-64,APIC] Do not enable x2APIC mode. - - x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of - default x2apic cluster mode on platforms - supporting x2apic. - noltlbs [PPC] Do not use large page/tlb entries for kernel lowmem mapping on PPC40x. @@ -1581,6 +1589,9 @@ and is between 256 and 4096 characters. It is defined in the file nomfgpt [X86-32] Disable Multi-Function General Purpose Timer usage (for AMD Geode machines). + norandmaps Don't use address space randomization. Equivalent to + echo 0 > /proc/sys/kernel/randomize_va_space + noreplace-paravirt [X86-32,PV_OPS] Don't patch paravirt_ops noreplace-smp [X86-32,SMP] Don't replace SMP instructions @@ -1615,17 +1626,19 @@ and is between 256 and 4096 characters. It is defined in the file nowb [ARM] + nox2apic [X86-64,APIC] Do not enable x2APIC mode. + nptcg= [IA64] Override max number of concurrent global TLB purges which is reported from either PAL_VM_SUMMARY or SAL PALO. + nr_uarts= [SERIAL] maximum number of UARTs to be registered. + numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA. one of ['zone', 'node', 'default'] can be specified This can be set from sysctl after boot. See Documentation/sysctl/vm.txt for details. - nr_uarts= [SERIAL] maximum number of UARTs to be registered. - ohci1394_dma=early [HW] enable debugging via the ohci1394 driver. See Documentation/debugging-via-ohci1394.txt for more info. @@ -1716,7 +1729,7 @@ and is between 256 and 4096 characters. It is defined in the file disable the use of PCIE advanced error reporting. nodomains [PCI] Disable support for multiple PCI root domains (aka PCI segments, in ACPI-speak). - nommconf [X86-32,X86_64] Disable use of MMCONFIG for PCI + nommconf [X86] Disable use of MMCONFIG for PCI Configuration nomsi [MSI] If the PCI_MSI kernel config parameter is enabled, this kernel boot option can be used to @@ -1865,6 +1878,12 @@ and is between 256 and 4096 characters. It is defined in the file autoconfiguration. Ranges are in pairs (memory base and size). + ports= [IP_VS_FTP] IPVS ftp helper module + Default is 21. + Up to 8 (IP_VS_APP_MAX_PORTS) ports + may be specified. + Format: <port>,<port>.... + print-fatal-signals= [KNL] debug: print fatal signals print-fatal-signals=1: print segfault info to @@ -1874,6 +1893,14 @@ and is between 256 and 4096 characters. It is defined in the file printk.time= Show timing data prefixed to each printk message line Format: <bool> (1/Y/y=enable, 0/N/n=disable) + processor.max_cstate= [HW,ACPI] + Limit processor to maximum C-state + max_cstate=9 overrides any DMI blacklist limit. + + processor.nocst [HW,ACPI] + Ignore the _CST method to determine C-states, + instead using the legacy FADT method + profile= [KNL] Enable kernel profiling via /proc/profile Format: [schedule,]<number> Param: "schedule" - profile schedule points. @@ -1883,14 +1910,6 @@ and is between 256 and 4096 characters. It is defined in the file Requires CONFIG_SCHEDSTATS Param: "kvm" - profile VM exits. - processor.max_cstate= [HW,ACPI] - Limit processor to maximum C-state - max_cstate=9 overrides any DMI blacklist limit. - - processor.nocst [HW,ACPI] - Ignore the _CST method to determine C-states, - instead using the legacy FADT method - prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk before loading. See Documentation/blockdev/ramdisk.txt. @@ -2044,7 +2063,13 @@ and is between 256 and 4096 characters. It is defined in the file allowing boot to proceed. none ignores them, expecting user space to do the scan. - selinux [SELINUX] Disable or enable SELinux at boot time. + security= [SECURITY] Choose a security module to enable at boot. + If this boot parameter is not specified, only the first + security module asking for security registration will be + loaded. An invalid security module name will be treated + as if no module has been chosen. + + selinux= [SELINUX] Disable or enable SELinux at boot time. Format: { "0" | "1" } See security/selinux/Kconfig help text. 0 -- disable. @@ -2364,6 +2389,8 @@ and is between 256 and 4096 characters. It is defined in the file tp720= [HW,PS2] + trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size. + trix= [HW,OSS] MediaTrix AudioTrix Pro Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> @@ -2399,7 +2426,7 @@ and is between 256 and 4096 characters. It is defined in the file reported either. unknown_nmi_panic - [X86-32,X86-64] + [X86] Set unknown_nmi_panic=1 early on boot. usbcore.autosuspend= @@ -2466,15 +2493,12 @@ and is between 256 and 4096 characters. It is defined in the file medium is write-protected). Example: quirks=0419:aaf5:rl,0421:0433:rc - add_efi_memmap [EFI; x86-32,X86-64] Include EFI memory map in - kernel's map of available physical RAM. - - vdso= [X86-32,SH,x86-64] + vdso= [X86,SH] vdso=2: enable compat VDSO (default with COMPAT_VDSO) vdso=1: enable VDSO (default) vdso=0: disable VDSO mapping - vdso32= [X86-32,X86-64] + vdso32= [X86] vdso32=2: enable compat VDSO (default with COMPAT_VDSO) vdso32=1: enable 32-bit VDSO (default) vdso32=0: disable 32-bit VDSO mapping @@ -2507,6 +2531,31 @@ and is between 256 and 4096 characters. It is defined in the file vmpoff= [KNL,S390] Perform z/VM CP command after power off. Format: <command> + vt.default_blu= [VT] + Format: <blue0>,<blue1>,<blue2>,...,<blue15> + Change the default blue palette of the console. + This is a 16-member array composed of values + ranging from 0-255. + + vt.default_grn= [VT] + Format: <green0>,<green1>,<green2>,...,<green15> + Change the default green palette of the console. + This is a 16-member array composed of values + ranging from 0-255. + + vt.default_red= [VT] + Format: <red0>,<red1>,<red2>,...,<red15> + Change the default red palette of the console. + This is a 16-member array composed of values + ranging from 0-255. + + vt.default_utf8= + [VT] + Format=<0|1> + Set system-wide default UTF-8 mode for all tty's. + Default is 1, i.e. UTF-8 mode is enabled for all + newly opened terminals. + waveartist= [HW,OSS] Format: <io>,<irq>,<dma>,<dma2> @@ -2519,6 +2568,10 @@ and is between 256 and 4096 characters. It is defined in the file wdt= [WDT] Watchdog See Documentation/watchdog/wdt.txt. + x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of + default x2apic cluster mode on platforms + supporting x2apic. + xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. xd_geo= See header of drivers/block/xd.c. @@ -2526,9 +2579,6 @@ and is between 256 and 4096 characters. It is defined in the file Format: <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]] - norandmaps Don't use address space randomization. Equivalent to - echo 0 > /proc/sys/kernel/randomize_va_space - ______________________________________________________________________ TODO: diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 48b3de90eb1e..1e7a769a10f9 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -212,7 +212,9 @@ hit, Kprobes calls kp->pre_handler. After the probed instruction is single-stepped, Kprobe calls kp->post_handler. If a fault occurs during execution of kp->pre_handler or kp->post_handler, or during single-stepping of the probed instruction, Kprobes calls -kp->fault_handler. Any or all handlers can be NULL. +kp->fault_handler. Any or all handlers can be NULL. If kp->flags +is set KPROBE_FLAG_DISABLED, that kp will be registered but disabled, +so, it's handlers aren't hit until calling enable_kprobe(kp). NOTE: 1. With the introduction of the "symbol_name" field to struct kprobe, @@ -363,6 +365,26 @@ probes) in the specified array, they clear the addr field of those incorrect probes. However, other probes in the array are unregistered correctly. +4.7 disable_*probe + +#include <linux/kprobes.h> +int disable_kprobe(struct kprobe *kp); +int disable_kretprobe(struct kretprobe *rp); +int disable_jprobe(struct jprobe *jp); + +Temporarily disables the specified *probe. You can enable it again by using +enable_*probe(). You must specify the probe which has been registered. + +4.8 enable_*probe + +#include <linux/kprobes.h> +int enable_kprobe(struct kprobe *kp); +int enable_kretprobe(struct kretprobe *rp); +int enable_jprobe(struct jprobe *jp); + +Enables *probe which has been disabled by disable_*probe(). You must specify +the probe which has been registered. + 5. Kprobes Features and Limitations Kprobes allows multiple probes at the same address. Currently, @@ -500,10 +522,14 @@ the probe. If the probed function belongs to a module, the module name is also specified. Following columns show probe status. If the probe is on a virtual address that is no longer valid (module init sections, module virtual addresses that correspond to modules that've been unloaded), -such probes are marked with [GONE]. +such probes are marked with [GONE]. If the probe is temporarily disabled, +such probes are marked with [DISABLED]. -/debug/kprobes/enabled: Turn kprobes ON/OFF +/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly. -Provides a knob to globally turn registered kprobes ON or OFF. By default, -all kprobes are enabled. By echoing "0" to this file, all registered probes -will be disarmed, till such time a "1" is echoed to this file. +Provides a knob to globally and forcibly turn registered kprobes ON or OFF. +By default, all kprobes are enabled. By echoing "0" to this file, all +registered probes will be disarmed, till such time a "1" is echoed to this +file. Note that this knob just disarms and arms all kprobes and doesn't +change each probe's disabling state. This means that disabled kprobes (marked +[DISABLED]) will be not enabled if you turn ON all kprobes by this knob. diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt index 2b3a6b5260bf..5ee2a02b3b40 100644 --- a/Documentation/laptops/acer-wmi.txt +++ b/Documentation/laptops/acer-wmi.txt @@ -1,9 +1,9 @@ Acer Laptop WMI Extras Driver http://code.google.com/p/aceracpi -Version 0.2 -18th August 2008 +Version 0.3 +4th April 2009 -Copyright 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk> +Copyright 2007-2009 Carlos Corbacho <carlos@strangeworlds.co.uk> acer-wmi is a driver to allow you to control various parts of your Acer laptop hardware under Linux which are exposed via ACPI-WMI. @@ -36,6 +36,10 @@ not possible in kernel space from a 64 bit OS. Supported Hardware ****************** +NOTE: The Acer Aspire One is not supported hardware. It cannot work with +acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been +blacklisted until that happens. + Please see the website for the current list of known working hardare: http://code.google.com/p/aceracpi/wiki/SupportedHardware diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 41bc99fa1884..e7e9a69069e1 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.22 - November 23rd, 2008 + Version 0.23 + April 10th, 2009 Borislav Deianov <borislav@users.sf.net> Henrique de Moraes Holschuh <hmh@hmh.eng.br> @@ -20,7 +20,8 @@ moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel kernel 2.6.29 and release 0.22. The driver is named "thinkpad-acpi". In some places, like module -names, "thinkpad_acpi" is used because of userspace issues. +names and log messages, "thinkpad_acpi" is used because of userspace +issues. "tpacpi" is used as a shorthand where "thinkpad-acpi" would be too long due to length limitations on some Linux kernel versions. @@ -37,7 +38,7 @@ detailed description): - ThinkLight on and off - limited docking and undocking - UltraBay eject - - CMOS control + - CMOS/UCMS control - LED control - ACPI sounds - temperature sensors @@ -46,6 +47,7 @@ detailed description): - Volume control - Fan control and monitoring: fan speed, fan enable/disable - WAN enable and disable + - UWB enable and disable A compatibility table by model and feature is maintained on the web site, http://ibm-acpi.sf.net/. I appreciate any success or failure @@ -53,7 +55,7 @@ reports, especially if they add to or correct the compatibility table. Please include the following information in your report: - ThinkPad model name - - a copy of your DSDT, from /proc/acpi/dsdt + - a copy of your ACPI tables, using the "acpidump" utility - a copy of the output of dmidecode, with serial numbers and UUIDs masked off - which driver features work and which don't @@ -66,17 +68,18 @@ Installation ------------ If you are compiling this driver as included in the Linux kernel -sources, simply enable the CONFIG_THINKPAD_ACPI option, and optionally -enable the CONFIG_THINKPAD_ACPI_BAY option if you want the -thinkpad-specific bay functionality. +sources, look for the CONFIG_THINKPAD_ACPI Kconfig option. +It is located on the menu path: "Device Drivers" -> "X86 Platform +Specific Device Drivers" -> "ThinkPad ACPI Laptop Extras". + Features -------- The driver exports two different interfaces to userspace, which can be used to access the features it provides. One is a legacy procfs-based -interface, which will be removed at some time in the distant future. -The other is a new sysfs-based interface which is not complete yet. +interface, which will be removed at some time in the future. The other +is a new sysfs-based interface which is not complete yet. The procfs interface creates the /proc/acpi/ibm directory. There is a file under that directory for each feature it supports. The procfs @@ -111,15 +114,17 @@ The version of thinkpad-acpi's sysfs interface is exported by the driver as a driver attribute (see below). Sysfs driver attributes are on the driver's sysfs attribute space, -for 2.6.23 this is /sys/bus/platform/drivers/thinkpad_acpi/ and +for 2.6.23+ this is /sys/bus/platform/drivers/thinkpad_acpi/ and /sys/bus/platform/drivers/thinkpad_hwmon/ Sysfs device attributes are on the thinkpad_acpi device sysfs attribute -space, for 2.6.23 this is /sys/devices/platform/thinkpad_acpi/. +space, for 2.6.23+ this is /sys/devices/platform/thinkpad_acpi/. Sysfs device attributes for the sensors and fan are on the thinkpad_hwmon device's sysfs attribute space, but you should locate it -looking for a hwmon device with the name attribute of "thinkpad". +looking for a hwmon device with the name attribute of "thinkpad", or +better yet, through libsensors. + Driver version -------------- @@ -129,6 +134,7 @@ sysfs driver attribute: version The driver name and version. No commands can be written to this file. + Sysfs interface version ----------------------- @@ -160,6 +166,7 @@ expect that an attribute might not be there, and deal with it properly (an attribute not being there *is* a valid way to make it clear that a feature is not available in sysfs). + Hot keys -------- @@ -172,17 +179,14 @@ system. Enabling the hotkey functionality of thinkpad-acpi signals the firmware that such a driver is present, and modifies how the ThinkPad firmware will behave in many situations. -The driver enables the hot key feature automatically when loaded. The -feature can later be disabled and enabled back at runtime. The driver -will also restore the hot key feature to its previous state and mask -when it is unloaded. +The driver enables the HKEY ("hot key") event reporting automatically +when loaded, and disables it when it is removed. -When the hotkey feature is enabled and the hot key mask is set (see -below), the driver will report HKEY events in the following format: +The driver will report HKEY events in the following format: ibm/hotkey HKEY 00000080 0000xxxx -Some of these events refer to hot key presses, but not all. +Some of these events refer to hot key presses, but not all of them. The driver will generate events over the input layer for hot keys and radio switches, and over the ACPI netlink layer for other events. The @@ -214,13 +218,17 @@ procfs notes: The following commands can be written to the /proc/acpi/ibm/hotkey file: - echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature - echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys ... any other 8-hex-digit mask ... echo reset > /proc/acpi/ibm/hotkey -- restore the original mask +The following commands have been deprecated and will cause the kernel +to log a warning: + + echo enable > /proc/acpi/ibm/hotkey -- does nothing + echo disable > /proc/acpi/ibm/hotkey -- returns an error + The procfs interface does not support NVRAM polling control. So as to maintain maximum bug-to-bug compatibility, it does not report any masks, nor does it allow one to manipulate the hot key mask when the firmware @@ -229,12 +237,9 @@ does not support masks at all, even if NVRAM polling is in use. sysfs notes: hotkey_bios_enabled: - Returns the status of the hot keys feature when - thinkpad-acpi was loaded. Upon module unload, the hot - key feature status will be restored to this value. + DEPRECATED, WILL BE REMOVED SOON. - 0: hot keys were disabled - 1: hot keys were enabled (unusual) + Returns 0. hotkey_bios_mask: Returns the hot keys mask when thinkpad-acpi was loaded. @@ -242,13 +247,10 @@ sysfs notes: to this value. hotkey_enable: - Enables/disables the hot keys feature in the ACPI - firmware, and reports current status of the hot keys - feature. Has no effect on the NVRAM hot key polling - functionality. + DEPRECATED, WILL BE REMOVED SOON. - 0: disables the hot keys feature / feature disabled - 1: enables the hot keys feature / feature enabled + 0: returns -EPERM + 1: does nothing hotkey_mask: bit mask to enable driver-handling (and depending on @@ -618,6 +620,7 @@ For Lenovo models *with* ACPI backlight control: and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process these keys on userspace somehow (e.g. by calling xbacklight). + Bluetooth --------- @@ -628,6 +631,9 @@ sysfs rfkill class: switch "tpacpi_bluetooth_sw" This feature shows the presence and current state of a ThinkPad Bluetooth device in the internal ThinkPad CDC slot. +If the ThinkPad supports it, the Bluetooth state is stored in NVRAM, +so it is kept across reboots and power-off. + Procfs notes: If Bluetooth is installed, the following commands can be used: @@ -652,6 +658,7 @@ Sysfs notes: rfkill controller switch "tpacpi_bluetooth_sw": refer to Documentation/rfkill.txt for details. + Video output control -- /proc/acpi/ibm/video -------------------------------------------- @@ -693,11 +700,8 @@ Fn-F7 from working. This also disables the video output switching features of this driver, as it uses the same ACPI methods as Fn-F7. Video switching on the console should still work. -UPDATE: There's now a patch for the X.org Radeon driver which -addresses this issue. Some people are reporting success with the patch -while others are still having problems. For more information: +UPDATE: refer to https://bugs.freedesktop.org/show_bug.cgi?id=2000 -https://bugs.freedesktop.org/show_bug.cgi?id=2000 ThinkLight control ------------------ @@ -720,10 +724,11 @@ The ThinkLight sysfs interface is documented by the LED class documentation, in Documentation/leds-class.txt. The ThinkLight LED name is "tpacpi::thinklight". -Due to limitations in the sysfs LED class, if the status of the thinklight +Due to limitations in the sysfs LED class, if the status of the ThinkLight cannot be read or if it is unknown, thinkpad-acpi will report it as "off". It is impossible to know if the status returned through sysfs is valid. + Docking / undocking -- /proc/acpi/ibm/dock ------------------------------------------ @@ -784,6 +789,7 @@ the only docking stations currently supported are the X-series UltraBase docks and "dumb" port replicators like the Mini Dock (the latter don't need any ACPI support, actually). + UltraBay eject -- /proc/acpi/ibm/bay ------------------------------------ @@ -847,8 +853,9 @@ supported. Use "eject2" instead of "eject" for the second bay. Note: the UltraBay eject support on the 600e/x, A22p and A3x is EXPERIMENTAL and may not work as expected. USE WITH CAUTION! -CMOS control ------------- + +CMOS/UCMS control +----------------- procfs: /proc/acpi/ibm/cmos sysfs device attribute: cmos_command @@ -882,6 +889,7 @@ The cmos command interface is prone to firmware split-brain problems, as in newer ThinkPads it is just a compatibility layer. Do not use it, it is exported just as a debug tool. + LED control ----------- @@ -893,6 +901,17 @@ some older ThinkPad models, it is possible to query the status of the LED indicators as well. Newer ThinkPads cannot query the real status of the LED indicators. +Because misuse of the LEDs could induce an unaware user to perform +dangerous actions (like undocking or ejecting a bay device while the +buses are still active), or mask an important alarm (such as a nearly +empty battery, or a broken battery), access to most LEDs is +restricted. + +Unrestricted access to all LEDs requires that thinkpad-acpi be +compiled with the CONFIG_THINKPAD_ACPI_UNSAFE_LEDS option enabled. +Distributions must never enable this option. Individual users that +are aware of the consequences are welcome to enabling it. + procfs notes: The available commands are: @@ -939,6 +958,7 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the "timer" trigger, and leave the delay_on and delay_off parameters set to zero (to request hardware acceleration autodetection). + ACPI sounds -- /proc/acpi/ibm/beep ---------------------------------- @@ -968,6 +988,7 @@ X40: 16 - one medium-pitched beep repeating constantly, stop with 17 17 - stop 16 + Temperature sensors ------------------- @@ -1115,6 +1136,7 @@ registers contain the current battery capacity, etc. If you experiment with this, do send me your results (including some complete dumps with a description of the conditions when they were taken.) + LCD brightness control ---------------------- @@ -1124,10 +1146,9 @@ sysfs backlight device "thinkpad_screen" This feature allows software control of the LCD brightness on ThinkPad models which don't have a hardware brightness slider. -It has some limitations: the LCD backlight cannot be actually turned on or -off by this interface, and in many ThinkPad models, the "dim while on -battery" functionality will be enabled by the BIOS when this interface is -used, and cannot be controlled. +It has some limitations: the LCD backlight cannot be actually turned +on or off by this interface, it just controls the backlight brightness +level. On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control has eight brightness levels, ranging from 0 to 7. Some of the levels @@ -1136,10 +1157,15 @@ display backlight brightness control methods have 16 levels, ranging from 0 to 15. There are two interfaces to the firmware for direct brightness control, -EC and CMOS. To select which one should be used, use the +EC and UCMS (or CMOS). To select which one should be used, use the brightness_mode module parameter: brightness_mode=1 selects EC mode, -brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC -and CMOS. The driver tries to auto-detect which interface to use. +brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC +mode with NVRAM backing (so that brightness changes are remembered +across shutdown/reboot). + +The driver tries to select which interface to use from a table of +defaults for each ThinkPad model. If it makes a wrong choice, please +report this as a bug, so that we can fix it. When display backlight brightness controls are available through the standard ACPI interface, it is best to use it instead of this direct @@ -1201,6 +1227,7 @@ WARNING: and maybe reduce the life of the backlight lamps by needlessly kicking its level up and down at every change. + Volume control -- /proc/acpi/ibm/volume --------------------------------------- @@ -1217,6 +1244,11 @@ distinct. The unmute the volume after the mute command, use either the up or down command (the level command will not unmute the volume). The current volume level and mute state is shown in the file. +The ALSA mixer interface to this feature is still missing, but patches +to add it exist. That problem should be addressed in the not so +distant future. + + Fan control and monitoring: fan speed, fan enable/disable --------------------------------------------------------- @@ -1383,8 +1415,11 @@ procfs: /proc/acpi/ibm/wan sysfs device attribute: wwan_enable (deprecated) sysfs rfkill class: switch "tpacpi_wwan_sw" -This feature shows the presence and current state of a W-WAN (Sierra -Wireless EV-DO) device. +This feature shows the presence and current state of the built-in +Wireless WAN device. + +If the ThinkPad supports it, the WWAN state is stored in NVRAM, +so it is kept across reboots and power-off. It was tested on a Lenovo ThinkPad X60. It should probably work on other ThinkPad models which come with this module installed. @@ -1413,6 +1448,7 @@ Sysfs notes: rfkill controller switch "tpacpi_wwan_sw": refer to Documentation/rfkill.txt for details. + EXPERIMENTAL: UWB ----------------- @@ -1431,6 +1467,7 @@ Sysfs notes: rfkill controller switch "tpacpi_uwb_sw": refer to Documentation/rfkill.txt for details. + Multiple Commands, Module Parameters ------------------------------------ @@ -1445,6 +1482,7 @@ for example: modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable + Enabling debugging output ------------------------- @@ -1457,8 +1495,15 @@ will enable all debugging output classes. It takes a bitmask, so to enable more than one output class, just add their values. Debug bitmask Description + 0x8000 Disclose PID of userspace programs + accessing some functions of the driver 0x0001 Initialization and probing 0x0002 Removal + 0x0004 RF Transmitter control (RFKILL) + (bluetooth, WWAN, UWB...) + 0x0008 HKEY event interface, hotkeys + 0x0010 Fan control + 0x0020 Backlight brightness There is also a kernel build option to enable more debugging information, which may be necessary to debug driver problems. @@ -1467,6 +1512,7 @@ The level of debugging information output by the driver can be changed at runtime through sysfs, using the driver attribute debug_level. The attribute takes the same bitmask as the debug module parameter above. + Force loading of module ----------------------- @@ -1505,3 +1551,7 @@ Sysfs interface changelog: 0x020200: Add poll()/select() support to the following attributes: hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason + +0x020300: hotkey enable/disable support removed, attributes + hotkey_bios_enabled and hotkey_enable deprecated and + marked for removal. diff --git a/Documentation/lguest/.gitignore b/Documentation/lguest/.gitignore new file mode 100644 index 000000000000..115587fd5f65 --- /dev/null +++ b/Documentation/lguest/.gitignore @@ -0,0 +1 @@ +lguest diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt index 29510dc51510..28c747362f95 100644 --- a/Documentation/lguest/lguest.txt +++ b/Documentation/lguest/lguest.txt @@ -3,11 +3,11 @@ /, /` - or, A Young Coder's Illustrated Hypervisor \\"--\\ http://lguest.ozlabs.org -Lguest is designed to be a minimal hypervisor for the Linux kernel, for -Linux developers and users to experiment with virtualization with the -minimum of complexity. Nonetheless, it should have sufficient -features to make it useful for specific tasks, and, of course, you are -encouraged to fork and enhance it (see drivers/lguest/README). +Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel, +for Linux developers and users to experiment with virtualization with the +minimum of complexity. Nonetheless, it should have sufficient features to +make it useful for specific tasks, and, of course, you are encouraged to fork +and enhance it (see drivers/lguest/README). Features: @@ -37,6 +37,7 @@ Running Lguest: "Paravirtualized guest support" = Y "Lguest guest support" = Y "High Memory Support" = off/4GB + "PAE (Physical Address Extension) Support" = N "Alignment value to which kernel should be aligned" = 0x100000 (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and CONFIG_PHYSICAL_ALIGN=0x100000) diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt index 938ea22f2cc0..e20d913d5914 100644 --- a/Documentation/lockdep-design.txt +++ b/Documentation/lockdep-design.txt @@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example: The bit position indicates STATE, STATE-read, for each of the states listed above, and the character displayed in each indicates: - '.' acquired while irqs disabled - '+' acquired in irq context - '-' acquired with irqs enabled + '.' acquired while irqs disabled and not in irq context + '-' acquired in irq context + '+' acquired with irqs enabled '?' acquired in irq context with irqs enabled. Unused mutexes cannot be part of the cause of an error. diff --git a/Documentation/logo.gif b/Documentation/logo.gif Binary files differnew file mode 100644 index 000000000000..2eae75fecfb9 --- /dev/null +++ b/Documentation/logo.gif diff --git a/Documentation/logo.svg b/Documentation/logo.svg deleted file mode 100644 index cb9e4851d8c3..000000000000 --- a/Documentation/logo.svg +++ /dev/null @@ -1,2911 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> -<svg - xmlns:dc="http://purl.org/dc/elements/1.1/" - xmlns:cc="http://creativecommons.org/ns#" - xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" - xmlns:svg="http://www.w3.org/2000/svg" - xmlns="http://www.w3.org/2000/svg" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" - xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="1771.6534" - height="1417.3228" - id="svg2" - sodipodi:version="0.32" - inkscape:version="0.46" - sodipodi:docname="tuz.svg" - inkscape:output_extension="org.inkscape.output.svg.inkscape" - version="1.0" - style="display:inline;enable-background:new" - inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png" - inkscape:export-xdpi="100.03588" - inkscape:export-ydpi="100.03588"> - <sodipodi:namedview - id="base" - pagecolor="#ffffff" - bordercolor="#666666" - borderopacity="1.0" - gridtolerance="10000" - guidetolerance="10" - objecttolerance="10" - inkscape:pageopacity="0.0" - inkscape:pageshadow="2" - inkscape:zoom="0.25" - inkscape:cx="-174.7931" - inkscape:cy="784.26325" - inkscape:document-units="px" - inkscape:current-layer="svg2" - showgrid="false" - inkscape:window-width="1280" - inkscape:window-height="823" - inkscape:window-x="-4" - inkscape:window-y="25" - showguides="true" - inkscape:guide-bbox="true" - units="mm" /> - <defs - id="defs4"> - <filter - inkscape:collect="always" - x="-0.084654994" - width="1.16931" - y="-0.36592469" - height="1.7318494" - id="filter11361"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="4.5740586" - id="feGaussianBlur11363" /> - </filter> - <inkscape:perspective - sodipodi:type="inkscape:persp3d" - inkscape:vp_x="0 : 564.0976 : 1" - inkscape:vp_y="0 : 1000 : 0" - inkscape:vp_z="1445.8591 : 564.0976 : 1" - inkscape:persp3d-origin="722.92957 : 376.06506 : 1" - id="perspective8145" /> - <linearGradient - id="linearGradient7622"> - <stop - style="stop-color:#ffffff;stop-opacity:1;" - offset="0" - id="stop7624" /> - <stop - style="stop-color:#ffffff;stop-opacity:0;" - offset="1" - id="stop7626" /> - </linearGradient> - <linearGradient - id="linearGradient4113"> - <stop - style="stop-color:#000000;stop-opacity:0;" - offset="0" - id="stop4115" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="1" - id="stop4117" /> - </linearGradient> - <linearGradient - inkscape:collect="always" - id="linearGradient3660"> - <stop - style="stop-color:#ffffff;stop-opacity:1;" - offset="0" - id="stop3662" /> - <stop - style="stop-color:#ffffff;stop-opacity:0;" - offset="1" - id="stop3664" /> - </linearGradient> - <linearGradient - id="linearGradient3627"> - <stop - style="stop-color:#ffffff;stop-opacity:1;" - offset="0" - id="stop3629" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="1" - id="stop3631" /> - </linearGradient> - <linearGradient - id="linearGradient2843"> - <stop - id="stop2845" - offset="0" - style="stop-color:#000000;stop-opacity:1;" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="0.02188784" - id="stop2847" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="0.75866222" - id="stop2849" /> - <stop - id="stop2851" - offset="0.88508981" - style="stop-color:#232323;stop-opacity:1;" /> - <stop - id="stop2853" - offset="1" - style="stop-color:#595959;stop-opacity:1;" /> - </linearGradient> - <linearGradient - inkscape:collect="always" - id="linearGradient8964"> - <stop - style="stop-color:#1a1a1a;stop-opacity:1;" - offset="0" - id="stop8966" /> - <stop - style="stop-color:#1a1a1a;stop-opacity:0;" - offset="1" - id="stop8968" /> - </linearGradient> - <linearGradient - id="linearGradient8952"> - <stop - style="stop-color:#0a0c0c;stop-opacity:1;" - offset="0" - id="stop8954" /> - <stop - style="stop-color:#1f2727;stop-opacity:0;" - offset="1" - id="stop8956" /> - </linearGradient> - <linearGradient - id="linearGradient8430"> - <stop - style="stop-color:#1e2323;stop-opacity:1;" - offset="0" - id="stop8432" /> - <stop - id="stop8438" - offset="0.55992389" - style="stop-color:#181d1d;stop-opacity:1;" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="1" - id="stop8434" /> - </linearGradient> - <linearGradient - id="linearGradient8398"> - <stop - style="stop-color:#283131;stop-opacity:0;" - offset="0" - id="stop8400" /> - <stop - id="stop8402" - offset="0.5125587" - style="stop-color:#1e2424;stop-opacity:0;" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="1" - id="stop8404" /> - </linearGradient> - <linearGradient - inkscape:collect="always" - id="linearGradient4870"> - <stop - style="stop-color:#c7bd80;stop-opacity:1;" - offset="0" - id="stop4872" /> - <stop - style="stop-color:#c7bd80;stop-opacity:0;" - offset="1" - id="stop4874" /> - </linearGradient> - <linearGradient - inkscape:collect="always" - id="linearGradient4862"> - <stop - style="stop-color:#e2e2e2;stop-opacity:1;" - offset="0" - id="stop4864" /> - <stop - style="stop-color:#e2e2e2;stop-opacity:0;" - offset="1" - id="stop4866" /> - </linearGradient> - <linearGradient - id="linearGradient4478"> - <stop - style="stop-color:#f9eed3;stop-opacity:1;" - offset="0" - id="stop4480" /> - <stop - style="stop-color:#000000;stop-opacity:0;" - offset="1" - id="stop4482" /> - </linearGradient> - <linearGradient - id="linearGradient4106"> - <stop - style="stop-color:#d9e002;stop-opacity:1;" - offset="0" - id="stop4108" /> - <stop - id="stop4114" - offset="0.5" - style="stop-color:#a9ae01;stop-opacity:1;" /> - <stop - style="stop-color:#717501;stop-opacity:1;" - offset="1" - id="stop4110" /> - </linearGradient> - <linearGradient - id="linearGradient4084"> - <stop - style="stop-color:#7d7d00;stop-opacity:1;" - offset="0" - id="stop4086" /> - <stop - id="stop4088" - offset="0.3636601" - style="stop-color:#c6c700;stop-opacity:1;" /> - <stop - style="stop-color:#f6f800;stop-opacity:1;" - offset="1" - id="stop4090" /> - </linearGradient> - <linearGradient - id="linearGradient4041"> - <stop - id="stop4043" - offset="0" - style="stop-color:#ffff00;stop-opacity:1;" /> - <stop - id="stop4045" - offset="1" - style="stop-color:#ffff00;stop-opacity:0;" /> - </linearGradient> - <linearGradient - id="linearGradient4025"> - <stop - style="stop-color:#ffffff;stop-opacity:1;" - offset="0" - id="stop4027" /> - <stop - style="stop-color:#ffffff;stop-opacity:0;" - offset="1" - id="stop4031" /> - </linearGradient> - <linearGradient - id="linearGradient4013"> - <stop - style="stop-color:#ffff00;stop-opacity:1;" - offset="0" - id="stop4015" /> - <stop - style="stop-color:#b2b200;stop-opacity:1;" - offset="1" - id="stop4017" /> - </linearGradient> - <linearGradient - id="linearGradient3985"> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="0" - id="stop3987" /> - <stop - style="stop-color:#1d1d1d;stop-opacity:1;" - offset="1" - id="stop3989" /> - </linearGradient> - <linearGradient - id="linearGradient3961"> - <stop - style="stop-color:#283131;stop-opacity:0;" - offset="0" - id="stop3963" /> - <stop - id="stop3965" - offset="0.5" - style="stop-color:#1e2424;stop-opacity:1;" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="1" - id="stop3967" /> - </linearGradient> - <linearGradient - id="linearGradient3951"> - <stop - id="stop3953" - offset="0" - style="stop-color:#344040;stop-opacity:1;" /> - <stop - style="stop-color:#222929;stop-opacity:1;" - offset="0.5" - id="stop3955" /> - <stop - id="stop3957" - offset="1" - style="stop-color:#000000;stop-opacity:1;" /> - </linearGradient> - <linearGradient - id="linearGradient3909"> - <stop - style="stop-color:#283131;stop-opacity:1;" - offset="0" - id="stop3911" /> - <stop - id="stop3917" - offset="0.5" - style="stop-color:#1e2424;stop-opacity:1;" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="1" - id="stop3913" /> - </linearGradient> - <linearGradient - id="linearGradient3537"> - <stop - style="stop-color:#ada469;stop-opacity:1;" - offset="0" - id="stop3539" /> - <stop - id="stop3545" - offset="0.81132078" - style="stop-color:#ada469;stop-opacity:1;" /> - <stop - style="stop-color:#ffffff;stop-opacity:1;" - offset="1" - id="stop3541" /> - </linearGradient> - <linearGradient - id="linearGradient3317"> - <stop - style="stop-color:#cfc690;stop-opacity:1" - offset="0" - id="stop3319" /> - <stop - id="stop3321" - offset="0.21161865" - style="stop-color:#afa775;stop-opacity:1;" /> - <stop - id="stop3323" - offset="0.53408515" - style="stop-color:#615c3a;stop-opacity:1;" /> - <stop - style="stop-color:#000000;stop-opacity:1;" - offset="0.76504093" - id="stop3325" /> - <stop - id="stop3327" - offset="1" - style="stop-color:#403518;stop-opacity:1;" /> - </linearGradient> - <linearGradient - id="linearGradient3239"> - <stop - id="stop3251" - offset="0" - style="stop-color:#cfc690;stop-opacity:1;" /> - <stop - style="stop-color:#afa775;stop-opacity:1;" - offset="0.21161865" - id="stop3267" /> - <stop - style="stop-color:#615c3a;stop-opacity:1;" - offset="0.53408515" - id="stop3261" /> - <stop - id="stop3265" - offset="0.76504093" - style="stop-color:#000000;stop-opacity:1;" /> - <stop - style="stop-color:#403518;stop-opacity:1;" - offset="1" - id="stop3243" /> - </linearGradient> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient3239" - id="radialGradient3281" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)" - spreadMethod="pad" - cx="806.52582" - cy="212.68117" - fx="806.52582" - fy="212.68117" - r="48.363216" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient3317" - id="radialGradient3315" - cx="543.6698" - cy="147.3131" - fx="543.6698" - fy="147.3131" - r="47.863216" - gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)" - gradientUnits="userSpaceOnUse" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient3537" - id="radialGradient3543" - cx="385" - cy="237.00504" - fx="385" - fy="237.00504" - r="86.928574" - gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)" - gradientUnits="userSpaceOnUse" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient3909" - id="radialGradient3915" - cx="418.30365" - cy="342.47794" - fx="418.30365" - fy="342.47794" - r="131.4509" - gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)" - gradientUnits="userSpaceOnUse" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient3951" - id="radialGradient3933" - cx="397.16388" - cy="336.95245" - fx="397.16388" - fy="336.95245" - r="36.75" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient3961" - id="linearGradient3959" - x1="398.21429" - y1="343.52289" - x2="379.28571" - y2="265.30862" - gradientUnits="userSpaceOnUse" - gradientTransform="translate(450.03125,73.843964)" /> - <filter - inkscape:collect="always" - id="filter3981" - x="-0.30000001" - width="1.6" - y="-0.30000001" - height="1.6"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="2" - id="feGaussianBlur3983" /> - </filter> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient3985" - id="radialGradient3991" - cx="402.48898" - cy="317.23578" - fx="402.48898" - fy="317.23578" - r="23.714285" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" /> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3999"> - <path - style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" - d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z" - id="path4001" - sodipodi:nodetypes="czzczzzzc" /> - </clipPath> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient4013" - id="radialGradient4056" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)" - cx="228.81355" - cy="440.26971" - fx="228.81355" - fy="440.26971" - r="119.17509" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient4041" - id="radialGradient4060" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)" - cx="275.4422" - cy="335.34866" - fx="275.4422" - fy="335.34866" - r="36.75" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient4025" - id="radialGradient4062" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)" - cx="275.4422" - cy="335.34866" - fx="275.4422" - fy="335.34866" - r="36.75" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient4084" - id="linearGradient4082" - gradientUnits="userSpaceOnUse" - x1="182.35046" - y1="256.11136" - x2="145.53348" - y2="542.20502" /> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath4100"> - <path - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" - d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z" - id="path4102" - sodipodi:nodetypes="ccccccc" /> - </clipPath> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient4106" - id="radialGradient4112" - cx="250.22678" - cy="475.09763" - fx="250.22678" - fy="475.09763" - r="95.98877" - gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)" - gradientUnits="userSpaceOnUse" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient4478" - id="linearGradient4484" - x1="412.08926" - y1="404.91574" - x2="417.375" - y2="401.82648" - gradientUnits="userSpaceOnUse" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient4478" - id="linearGradient4486" - x1="411.91071" - y1="404.91577" - x2="417.375" - y2="401.82648" - gradientUnits="userSpaceOnUse" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient4478" - id="linearGradient4488" - x1="411.91071" - y1="405.54077" - x2="417.375" - y2="401.82648" - gradientUnits="userSpaceOnUse" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient4478" - id="linearGradient4490" - x1="412.08926" - y1="405.54077" - x2="417.375" - y2="401.82648" - gradientUnits="userSpaceOnUse" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient4478" - id="linearGradient4492" - x1="411.73212" - y1="405.54077" - x2="417.375" - y2="401.82648" - gradientUnits="userSpaceOnUse" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient4862" - id="radialGradient4868" - cx="429.56738" - cy="377.42877" - fx="429.56738" - fy="377.42877" - r="72.079735" - gradientTransform="matrix(1,0,0,0.618034,0,144.16496)" - gradientUnits="userSpaceOnUse" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient4870" - id="radialGradient4876" - cx="437.6991" - cy="391.21735" - fx="437.6991" - fy="391.21735" - r="36.611931" - gradientTransform="matrix(1,0,0,0.618034,0,149.43174)" - gradientUnits="userSpaceOnUse" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient4013" - id="radialGradient3585" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)" - cx="228.81355" - cy="440.26971" - fx="228.81355" - fy="440.26971" - r="119.17509" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient4084" - id="linearGradient3587" - gradientUnits="userSpaceOnUse" - x1="182.35046" - y1="256.11136" - x2="145.53348" - y2="542.20502" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient3317" - id="radialGradient8410" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)" - cx="317.78754" - cy="129.65378" - fx="317.78754" - fy="129.65378" - r="47.863216" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient8398" - id="radialGradient8412" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)" - cx="325.30847" - cy="80.909554" - fx="325.30847" - fy="80.909554" - r="26.937988" /> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8514"> - <path - style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z" - id="path8516" - sodipodi:nodetypes="cscccccccccccc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8604"> - <path - style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z" - id="path8606" - sodipodi:nodetypes="cscccccccccccc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8610"> - <path - style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z" - id="path8612" - sodipodi:nodetypes="cscccccccccccc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8616"> - <path - style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z" - id="path8618" - sodipodi:nodetypes="cscccccccccccc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8622"> - <path - style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583" - id="path8624" - sodipodi:nodetypes="czzzzzzczczczczzzc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8642"> - <path - style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z" - id="path8644" - sodipodi:nodetypes="czzcczcc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8658"> - <path - style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z" - id="path8660" - sodipodi:nodetypes="czzzcczzcc" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter8802" - x="-0.35311759" - width="1.7062352" - y="-0.1817714" - height="1.3635428"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="48.038491" - id="feGaussianBlur8804" /> - </filter> - <filter - inkscape:collect="always" - id="filter8806" - x="-0.61142862" - width="2.2228572" - y="-0.14930232" - height="1.2986046"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="37.830213" - id="feGaussianBlur8808" /> - </filter> - <filter - inkscape:collect="always" - id="filter8810" - x="-0.23519406" - width="1.4703881" - y="-0.24500646" - height="1.4900129"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="58.328041" - id="feGaussianBlur8812" /> - </filter> - <filter - inkscape:collect="always" - id="filter8814" - x="-0.20466694" - width="1.4093339" - y="-0.29007819" - height="1.5801564"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="22.300169" - id="feGaussianBlur8816" /> - </filter> - <filter - inkscape:collect="always" - id="filter8818" - x="-0.34381232" - width="1.6876246" - y="-0.18433961" - height="1.3686792"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="34.542167" - id="feGaussianBlur8820" /> - </filter> - <filter - inkscape:collect="always" - id="filter8822" - x="-0.2742857" - width="1.5485713" - y="-0.21333334" - height="1.4266667"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="11.313708" - id="feGaussianBlur8824" /> - </filter> - <filter - inkscape:collect="always" - id="filter8826" - x="-0.25894088" - width="1.5178818" - y="-0.2236412" - height="1.4472824"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="19.631544" - id="feGaussianBlur8828" /> - </filter> - <filter - inkscape:collect="always" - id="filter8856" - x="-0.3253231" - width="1.6506462" - y="-0.19013336" - height="1.3802667"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="28.712591" - id="feGaussianBlur8858" /> - </filter> - <filter - inkscape:collect="always" - id="filter8860" - x="-0.38093024" - width="1.7618605" - y="-0.17518716" - height="1.3503743"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="19.304015" - id="feGaussianBlur8862" /> - </filter> - <filter - inkscape:collect="always" - id="filter8888" - x="-0.2112188" - width="1.4224375" - y="-0.16808605" - height="1.3361721"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="8.3693583" - id="feGaussianBlur8890" /> - </filter> - <filter - inkscape:collect="always" - id="filter8892" - x="-0.18692794" - width="1.3738559" - y="-0.23646873" - height="1.4729375"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="31.21228" - id="feGaussianBlur8894" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8906"> - <path - style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z" - id="path8908" - sodipodi:nodetypes="cscccccccccccc" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter8940" - x="-0.25152978" - width="1.5030596" - y="-0.053035267" - height="1.1060705"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="13.024603" - id="feGaussianBlur8942" /> - </filter> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient8952" - id="linearGradient8958" - x1="609.31244" - y1="239.46866" - x2="560.83142" - y2="262.86206" - gradientUnits="userSpaceOnUse" - gradientTransform="translate(450.03125,73.843964)" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient8964" - id="linearGradient8970" - x1="603.84064" - y1="627.85303" - x2="616.24396" - y2="585.42664" - gradientUnits="userSpaceOnUse" - gradientTransform="translate(450.03125,73.843964)" /> - <filter - inkscape:collect="always" - id="filter9020" - x="-0.32861114" - width="1.6572223" - y="-0.182" - height="1.364"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="20.912684" - id="feGaussianBlur9022" /> - </filter> - <filter - inkscape:collect="always" - id="filter9024" - x="-0.55453134" - width="2.1090627" - y="-0.51434779" - height="2.0286956"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="20.912684" - id="feGaussianBlur9026" /> - </filter> - <filter - inkscape:collect="always" - id="filter9044" - x="-0.32631579" - width="1.6526316" - y="-0.84545463" - height="2.6909094"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="21.92031" - id="feGaussianBlur9046" /> - </filter> - <filter - inkscape:collect="always" - id="filter9048" - x="-0.40879121" - width="1.8175824" - y="-0.71538466" - height="2.4307692"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="21.92031" - id="feGaussianBlur9050" /> - </filter> - <filter - inkscape:collect="always" - id="filter3587" - x="-0.1"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="8.881432" - id="feGaussianBlur3589" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3602"> - <path - sodipodi:nodetypes="czzzzzzczczczczzzc" - id="path3604" - d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187" - style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter4120" - x="-0.2770822" - width="1.5541644" - y="-0.32482043" - height="1.6496409"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="19.956289" - id="feGaussianBlur4122" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3631"> - <path - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z" - id="path3633" - sodipodi:nodetypes="czzzzzzcccccccccczczz" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3665"> - <path - sodipodi:nodetypes="czzcczcc" - id="path3667" - d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z" - style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3677"> - <path - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z" - id="path3679" - sodipodi:nodetypes="czzzzzzcccccccccczczz" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter3898"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="10.892985" - id="feGaussianBlur3900" /> - </filter> - <filter - inkscape:collect="always" - id="filter4130" - x="-0.49509686" - width="1.9901937" - y="-0.26708817" - height="1.5341763"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="10.730622" - id="feGaussianBlur4132" /> - </filter> - <filter - inkscape:collect="always" - id="filter4141" - x="-0.40611032" - width="1.8122206" - y="-0.30260596" - height="1.6052119"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="9.8586086" - id="feGaussianBlur4143" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath4177"> - <path - sodipodi:nodetypes="czzzzzzcccccccccczczz" - id="path4179" - d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z" - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter4185"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="3.6164709" - id="feGaussianBlur4187" /> - </filter> - <filter - inkscape:collect="always" - id="filter4105"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="3.8640966" - id="feGaussianBlur4107" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath2833"> - <path - style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z" - id="path2835" - sodipodi:nodetypes="czzzcczzcc" /> - </clipPath> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient2843" - id="linearGradient2841" - gradientUnits="userSpaceOnUse" - x1="347.89655" - y1="1070.2124" - x2="275.58191" - y2="867.97992" /> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient3627" - id="linearGradient3688" - gradientUnits="userSpaceOnUse" - x1="699.32867" - y1="269.76755" - x2="698.97504" - y2="346.1351" /> - <mask - maskUnits="userSpaceOnUse" - id="mask3684"> - <path - sodipodi:type="arc" - style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - id="path3686" - sodipodi:cx="579.474" - sodipodi:cy="260.57516" - sodipodi:rx="192.6866" - sodipodi:ry="164.04877" - d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z" - transform="translate(-174.03125,62.156036)" /> - </mask> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3622"> - <path - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z" - id="path3624" - sodipodi:nodetypes="czzzzzzcccccccccczczz" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3636"> - <path - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z" - id="path3638" - sodipodi:nodetypes="czzzzzzcccccccccczczz" /> - </clipPath> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient3660" - id="linearGradient3666" - x1="1255.7386" - y1="667.09216" - x2="893.69995" - y2="858.01099" - gradientUnits="userSpaceOnUse" /> - <filter - inkscape:collect="always" - id="filter3779" - x="-0.087980822" - width="1.1759616" - y="-0.17728332" - height="1.3545666"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="16.340344" - id="feGaussianBlur3781" /> - </filter> - <filter - id="filter3785" - inkscape:label="White Fur"> - <feTurbulence - id="feTurbulence3787" - in="SourceAlpha" - type="fractalNoise" - baseFrequency="0.24044943820224721" - numOctaves="10" - seed="655" - result="result0" /> - <feDisplacementMap - id="feDisplacementMap3789" - in="SourceGraphic" - in2="result0" - scale="62" - xChannelSelector="B" - yChannelSelector="G" /> - </filter> - <filter - inkscape:collect="always" - id="filter3677"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="2.0397518" - id="feGaussianBlur3679" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3722"> - <path - style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z" - id="path3724" - sodipodi:nodetypes="czzzzzzzzcc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3986"> - <path - style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z" - id="path3988" - sodipodi:nodetypes="czzzzzzzzcc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3992"> - <path - style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z" - id="path3994" - sodipodi:nodetypes="czzzzzzzzcc" /> - </clipPath> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath3998"> - <path - style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z" - id="path4000" - sodipodi:nodetypes="cscccccccccccc" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter4002" - x="-0.24334238" - width="1.4866848" - y="-0.39104807" - height="1.7820961"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="14.589518" - id="feGaussianBlur4004" /> - </filter> - <filter - inkscape:collect="always" - id="filter4010" - x="-0.14577261" - width="1.2915452" - y="-0.23523259" - height="1.4704652"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="4.4442907" - id="feGaussianBlur4012" /> - </filter> - <filter - inkscape:collect="always" - id="filter4053"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.6062947" - id="feGaussianBlur4055" /> - </filter> - <filter - inkscape:collect="always" - id="filter4079"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="6.5887624" - id="feGaussianBlur4081" /> - </filter> - <filter - inkscape:collect="always" - id="filter4083"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.5052066" - id="feGaussianBlur4085" /> - </filter> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient4113" - id="radialGradient4119" - cx="296.33783" - cy="427.17749" - fx="296.33783" - fy="427.17749" - r="19.704132" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" /> - <filter - inkscape:collect="always" - id="filter6949" - x="-0.10294895" - width="1.2058979" - y="-0.34224695" - height="1.6844939"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6951" /> - </filter> - <filter - inkscape:collect="always" - id="filter6953" - x="-0.098320946" - width="1.1966419" - y="-0.19750816" - height="1.3950163"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6955" /> - </filter> - <filter - inkscape:collect="always" - id="filter6957" - x="-0.098213427" - width="1.1964267" - y="-0.19838208" - height="1.3967642"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6959" /> - </filter> - <filter - inkscape:collect="always" - id="filter6961" - x="-0.09919104" - width="1.1983821" - y="-0.22643611" - height="1.4528722"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6963" /> - </filter> - <filter - inkscape:collect="always" - id="filter6965" - x="-0.099081434" - width="1.1981629" - y="-0.22529824" - height="1.4505965"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6967" /> - </filter> - <filter - inkscape:collect="always" - id="filter6969" - x="-0.10450897" - width="1.2090179" - y="-0.40468886" - height="1.8093777"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6971" /> - </filter> - <filter - inkscape:collect="always" - id="filter6973" - x="-0.10330495" - width="1.2066098" - y="-0.36439717" - height="1.7287945"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6975" /> - </filter> - <filter - inkscape:collect="always" - id="filter6977" - x="-0.10224481" - width="1.2044896" - y="-0.32371372" - height="1.6474274"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6979" /> - </filter> - <filter - inkscape:collect="always" - id="filter6981" - x="-0.10052545" - width="1.2010509" - y="-0.2742162" - height="1.5484324"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6983" /> - </filter> - <filter - inkscape:collect="always" - id="filter6985" - x="-0.098428868" - width="1.1968577" - y="-0.20853186" - height="1.4170637"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6987" /> - </filter> - <filter - inkscape:collect="always" - id="filter6989" - x="-0.098428868" - width="1.1968577" - y="-0.20287035" - height="1.4057407"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6991" /> - </filter> - <filter - inkscape:collect="always" - id="filter6993" - x="-0.098213255" - width="1.1964265" - y="-0.19838208" - height="1.3967642"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6995" /> - </filter> - <filter - inkscape:collect="always" - id="filter6997"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur6999" /> - </filter> - <filter - inkscape:collect="always" - id="filter7001"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.1675612" - id="feGaussianBlur7003" /> - </filter> - <filter - inkscape:collect="always" - id="filter7285" - x="-0.030884685" - width="1.0617694" - y="-0.10267408" - height="1.2053483"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7287" /> - </filter> - <filter - inkscape:collect="always" - id="filter7289"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7291" /> - </filter> - <filter - inkscape:collect="always" - id="filter7293"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7295" /> - </filter> - <filter - inkscape:collect="always" - id="filter7297"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7299" /> - </filter> - <filter - inkscape:collect="always" - id="filter7301"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7303" /> - </filter> - <filter - inkscape:collect="always" - id="filter7305"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7307" /> - </filter> - <filter - inkscape:collect="always" - id="filter7309"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7311" /> - </filter> - <filter - inkscape:collect="always" - id="filter7313"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7315" /> - </filter> - <filter - inkscape:collect="always" - id="filter7317"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7319" /> - </filter> - <filter - inkscape:collect="always" - id="filter7321"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7323" /> - </filter> - <filter - inkscape:collect="always" - id="filter7325" - x="-0.031352691" - width="1.0627054" - y="-0.12140666" - height="1.2428133"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7327" /> - </filter> - <filter - inkscape:collect="always" - id="filter7329" - x="-0.030991485" - width="1.061983" - y="-0.10931916" - height="1.2186383"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7331" /> - </filter> - <filter - inkscape:collect="always" - id="filter7333"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7335" /> - </filter> - <filter - inkscape:collect="always" - id="filter7337"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.35026836" - id="feGaussianBlur7339" /> - </filter> - <filter - inkscape:collect="always" - id="filter7345"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.7233839" - id="feGaussianBlur7347" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath7421"> - <path - sodipodi:type="inkscape:offset" - inkscape:radius="0" - inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z " - style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - id="path7423" - d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z" - transform="translate(8.0045714e-2,-3.125e-2)" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter7578" - x="-0.08160872" - width="1.1632174" - y="-0.22659944" - height="1.4531989"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="2.437399" - id="feGaussianBlur7580" /> - </filter> - <filter - inkscape:collect="always" - id="filter7594" - x="-0.040804356" - width="1.0816087" - y="-0.11329972" - height="1.2265995"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="1.2186995" - id="feGaussianBlur7596" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath7606"> - <path - id="path7608" - d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z" - style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter7610" - x="-0.021942979" - width="1.0438859" - y="-0.10017137" - height="1.2003427"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="0.57530213" - id="feGaussianBlur7612" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath7616"> - <path - id="path7618" - d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z" - style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </clipPath> - <linearGradient - inkscape:collect="always" - xlink:href="#linearGradient7622" - id="linearGradient7708" - gradientUnits="userSpaceOnUse" - gradientTransform="translate(-19.091883,4.2426407)" - x1="774.97668" - y1="-211.87105" - x2="755.11584" - y2="-202.67865" /> - <mask - maskUnits="userSpaceOnUse" - id="mask7704"> - <path - style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" - d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z" - id="path7706" /> - </mask> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient8430" - id="radialGradient7904" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)" - cx="142.95833" - cy="107.09234" - fx="142.95833" - fy="107.09234" - r="66.981766" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient3317" - id="radialGradient7906" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)" - cx="317.78754" - cy="129.65378" - fx="317.78754" - fy="129.65378" - r="47.863216" /> - <radialGradient - inkscape:collect="always" - xlink:href="#linearGradient8398" - id="radialGradient7908" - gradientUnits="userSpaceOnUse" - gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)" - cx="325.30847" - cy="80.909554" - fx="325.30847" - fy="80.909554" - r="26.937988" /> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8209"> - <path - sodipodi:nodetypes="czcc" - id="path8211" - d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211" - style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter8225"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="10.661912" - id="feGaussianBlur8227" /> - </filter> - <filter - inkscape:collect="always" - id="filter8333"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="7.18" - id="feGaussianBlur8335" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8338"> - <path - sodipodi:nodetypes="czzzzzzcccccccccczczz" - id="path8340" - d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z" - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter8354"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="6.82" - id="feGaussianBlur8356" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8359"> - <path - sodipodi:nodetypes="czzzzzzcccccccccczczz" - id="path8361" - d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z" - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter8379" - x="-0.14413793" - width="1.288276" - y="-0.10278689" - height="1.2055738"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="7.389266" - id="feGaussianBlur8381" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8392"> - <path - sodipodi:nodetypes="czzzzzzcccccccccczczz" - id="path8394" - d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z" - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </clipPath> - <filter - inkscape:collect="always" - id="filter8404" - x="-0.090268657" - width="1.1805373" - y="-0.10250848" - height="1.205017"> - <feGaussianBlur - inkscape:collect="always" - stdDeviation="5.3457272" - id="feGaussianBlur8406" /> - </filter> - <clipPath - clipPathUnits="userSpaceOnUse" - id="clipPath8417"> - <path - sodipodi:nodetypes="czzzzzzcccccccccczczz" - id="path8419" - d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z" - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </clipPath> - </defs> - <metadata - id="metadata7"> - <rdf:RDF> - <cc:Work - rdf:about=""> - <dc:format>image/svg+xml</dc:format> - <dc:type - rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> - </cc:Work> - </rdf:RDF> - </metadata> - <g - inkscape:groupmode="layer" - id="layer1" - inkscape:label="Shadow"> - <path - style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new" - d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z" - id="path10326" - sodipodi:nodetypes="cccccccccsccccccccccc" - transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)" - inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png" - inkscape:export-xdpi="142.10527" - inkscape:export-ydpi="142.10527" /> - </g> - <g - inkscape:groupmode="layer" - id="layer20" - inkscape:label="New Ear"> - <g - style="opacity:1;display:inline;enable-background:new" - id="g7882" - transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)"> - <path - sodipodi:nodetypes="czzzzcc" - id="path7876" - d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z" - style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - <path - sodipodi:nodetypes="czzzzzc" - id="path7878" - d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z" - style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - <path - sodipodi:nodetypes="czccssc" - id="path7880" - d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z" - style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - </g> - </g> - <g - inkscape:groupmode="layer" - id="layer21" - inkscape:label="Rendered2" - style="display:inline"> - <path - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z" - id="path7917" - sodipodi:nodetypes="czzzcczzcc" /> - <path - style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate" - d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z" - id="path7919" - clip-path="url(#clipPath8658)" - sodipodi:nodetypes="ccccc" - transform="translate(276,136)" /> - <path - style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate" - d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z" - id="path7923" - clip-path="url(#clipPath2833)" - sodipodi:nodetypes="cccccc" - transform="translate(276,136)" /> - <path - style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z" - id="path7921" - sodipodi:nodetypes="czzcczcc" /> - <path - style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate" - d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z" - id="path7925" - sodipodi:nodetypes="ccccccc" - clip-path="url(#clipPath3665)" - transform="translate(276,136)" /> - <path - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633" - id="path7927" - sodipodi:nodetypes="czzzzcc" /> - <path - style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate" - d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z" - id="path7929" - clip-path="url(#clipPath8642)" - sodipodi:nodetypes="ccccc" - transform="translate(276,136)" /> - <g - style="opacity:1;display:inline;enable-background:new" - id="g7931" - transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)" - inkscape:transform-center-x="-347.89063" - inkscape:transform-center-y="-28.255779"> - <path - style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z" - id="path7933" /> - <g - clip-path="url(#clipPath7616)" - style="display:inline;filter:url(#filter7610);enable-background:new" - id="g7935" - transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)"> - <path - sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc" - id="path7937" - d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - id="path7939" - d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - sodipodi:nodetypes="cssccsscc" /> - <path - id="path7941" - d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - sodipodi:nodetypes="csccscc" /> - </g> - <g - clip-path="url(#clipPath7606)" - id="g7943"> - <path - style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new" - d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z" - id="path7945" - sodipodi:nodetypes="czzzzzzzzzzzzzz" /> - <path - style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new" - d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z" - id="path7947" - sodipodi:nodetypes="czzzzzzzzzzzzzz" /> - </g> - </g> - <path - style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z" - id="path7949" - sodipodi:nodetypes="cscccccccccccc" /> - <path - style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate" - d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z" - id="path7951" - sodipodi:nodetypes="ccccczzzcc" - clip-path="url(#clipPath8616)" - transform="translate(276,136)" /> - <path - style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211" - id="path7953" - sodipodi:nodetypes="czcc" /> - <path - style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate" - d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z" - id="path7955" - sodipodi:nodetypes="cccc" - clip-path="url(#clipPath8209)" - transform="translate(276,136)" /> - <g - transform="translate(450.03125,73.843964)" - style="opacity:1;display:inline;enable-background:new" - id="g7957" - clip-path="url(#clipPath3998)"> - <g - transform="translate(-174.03125,62.156036)" - style="filter:url(#filter3677)" - id="g7959"> - <g - id="g7961" - style="filter:url(#filter3785)"> - <path - sodipodi:nodetypes="czzzzzzzzzz" - id="path7963" - d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <rect - y="412.60312" - x="343.6539" - height="181.01935" - width="381.83765" - id="rect7965" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - <g - id="g7967" - style="filter:url(#filter3785)"> - <path - sodipodi:nodetypes="czzzcc" - id="path7969" - d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - transform="translate(174.03125,-62.156036)" /> - <rect - y="344.82138" - x="702.86414" - height="162.63455" - width="207.8894" - id="rect7971" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - </g> - <g - transform="translate(-174.03125,62.156036)" - style="opacity:0.18000004;display:inline;enable-background:new" - id="g7973"> - <g - id="g7975" - style="filter:url(#filter3785)"> - <path - sodipodi:nodetypes="czzzzzzzzzz" - id="path7977" - d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <rect - y="412.60312" - x="343.6539" - height="181.01935" - width="381.83765" - id="rect7979" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - <g - id="g7981" - style="filter:url(#filter3785)"> - <path - sodipodi:nodetypes="czzzcc" - id="path7983" - d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - transform="translate(174.03125,-62.156036)" /> - <rect - y="344.82138" - x="702.86414" - height="162.63455" - width="207.8894" - id="rect7985" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - </g> - </g> - <path - style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate" - d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z" - id="path7987" - clip-path="url(#clipPath8604)" - sodipodi:nodetypes="cccccscc" - transform="translate(276,136)" /> - <path - style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043" - id="path7989" - sodipodi:nodetypes="czzzzzzc" /> - <path - style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z" - id="path7991" - sodipodi:nodetypes="czzzzc" /> - <path - sodipodi:type="arc" - style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate" - id="path7993" - sodipodi:cx="385" - sodipodi:cy="237.00504" - sodipodi:rx="86.428574" - sodipodi:ry="73.928574" - d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z" - transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)" - clip-path="url(#clipPath4100)" /> - <path - transform="translate(450.03125,73.843964)" - style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z" - id="path7995" - sodipodi:nodetypes="csczzc" - mask="url(#mask3684)" /> - <path - style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328" - id="path7997" - sodipodi:nodetypes="czcc" /> - <path - sodipodi:type="arc" - style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - id="path7999" - sodipodi:cx="409.28571" - sodipodi:cy="306.64789" - sodipodi:rx="36.25" - sodipodi:ry="36.25" - d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z" - transform="translate(449.49554,74.915393)" /> - <path - style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate" - d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z" - id="path8001" - sodipodi:nodetypes="cccccccccc" - clip-path="url(#clipPath8616)" - transform="translate(276,136)" /> - <path - style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate" - d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z" - id="path8003" - sodipodi:nodetypes="czzcc" /> - <path - sodipodi:type="arc" - style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - id="path8005" - sodipodi:cx="410" - sodipodi:cy="306.64789" - sodipodi:rx="23.214285" - sodipodi:ry="23.214285" - d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z" - transform="translate(449.67411,74.915393)" /> - <path - sodipodi:type="arc" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate" - id="path8007" - sodipodi:cx="414.28571" - sodipodi:cy="303.07648" - sodipodi:rx="7.5" - sodipodi:ry="7.5" - d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z" - transform="translate(451.99554,73.486821)" /> - <path - style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z" - id="path8009" - sodipodi:nodetypes="czzzczc" /> - <g - style="opacity:1;display:inline;enable-background:new" - id="g8011" - transform="translate(780.74553,74.55825)"> - <path - transform="translate(-329.81481,0)" - clip-path="url(#clipPath3999)" - sodipodi:nodetypes="czzczzzszc" - id="path8013" - d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z" - style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" /> - <path - transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)" - d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z" - sodipodi:ry="134.00607" - sodipodi:rx="64.715881" - sodipodi:cy="338.07648" - sodipodi:cx="183.57143" - id="path8015" - style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - sodipodi:type="arc" /> - <path - transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)" - d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z" - sodipodi:ry="134.00607" - sodipodi:rx="64.715881" - sodipodi:cy="338.07648" - sodipodi:cx="183.57143" - id="path8017" - style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - sodipodi:type="arc" /> - <path - transform="translate(-329.81481,3e-7)" - clip-path="url(#clipPath3999)" - sodipodi:nodetypes="czzczzzszc" - id="path8019" - d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" /> - </g> - <path - sodipodi:type="arc" - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - id="path8021" - sodipodi:cx="310.71429" - sodipodi:cy="398.07648" - sodipodi:rx="19.704132" - sodipodi:ry="19.704132" - d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z" - transform="translate(452.55663,72.581273)" /> - <path - sodipodi:type="arc" - style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate" - id="path8023" - sodipodi:cx="310.71429" - sodipodi:cy="398.07648" - sodipodi:rx="19.704132" - sodipodi:ry="19.704132" - d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z" - transform="translate(450.55663,72.581273)" /> - <path - sodipodi:type="arc" - style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - id="path8025" - sodipodi:cx="310.71429" - sodipodi:cy="398.07648" - sodipodi:rx="19.704132" - sodipodi:ry="19.704132" - d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z" - transform="translate(450.55663,72.581273)" /> - <path - sodipodi:type="arc" - style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate" - id="path8027" - sodipodi:cx="429.56738" - sodipodi:cy="377.42877" - sodipodi:rx="72.079735" - sodipodi:ry="44.547726" - d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z" - transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)" - inkscape:transform-center-x="-47.231976" - inkscape:transform-center-y="-3.6935079" /> - <path - sodipodi:type="arc" - style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate" - id="path8029" - sodipodi:cx="437.6991" - sodipodi:cy="391.21735" - sodipodi:rx="36.611931" - sodipodi:ry="22.627417" - d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z" - transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)" - inkscape:transform-center-x="-20.955902" - inkscape:transform-center-y="-13.056625" /> - <g - transform="translate(450.03125,73.843964)" - id="g8031" - style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new"> - <path - d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z" - sodipodi:ry="3.2142856" - sodipodi:rx="3.2142856" - sodipodi:cy="401.82648" - sodipodi:cx="413.66071" - id="path8033" - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - sodipodi:type="arc" /> - <path - transform="translate(13.125009,8.1249913)" - d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z" - sodipodi:ry="3.2142856" - sodipodi:rx="3.2142856" - sodipodi:cy="401.82648" - sodipodi:cx="413.66071" - id="path8035" - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - sodipodi:type="arc" /> - <path - transform="translate(32.946437,7.4999913)" - d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z" - sodipodi:ry="3.2142856" - sodipodi:rx="3.2142856" - sodipodi:cy="401.82648" - sodipodi:cx="413.66071" - id="path8037" - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - sodipodi:type="arc" /> - <path - transform="translate(24.910723,-10.267866)" - d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z" - sodipodi:ry="3.2142856" - sodipodi:rx="3.2142856" - sodipodi:cy="401.82648" - sodipodi:cx="413.66071" - id="path8039" - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - sodipodi:type="arc" /> - <path - transform="translate(47.589294,-0.6250087)" - d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z" - sodipodi:ry="3.2142856" - sodipodi:rx="3.2142856" - sodipodi:cy="401.82648" - sodipodi:cx="413.66071" - id="path8041" - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - sodipodi:type="arc" /> - </g> - <path - style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151" - id="path8043" - sodipodi:nodetypes="ccccccccc" /> - <path - style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542" - id="path8045" - sodipodi:nodetypes="cccccccccccc" /> - <path - style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528" - id="path8047" - sodipodi:nodetypes="ccccccccccccc" /> - <path - style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new" - d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z" - id="path8049" - clip-path="url(#clipPath8514)" - transform="translate(276,136)" /> - <path - style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z" - id="path8051" /> - <path - style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate" - d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z" - id="path8053" - clip-path="url(#clipPath8610)" - sodipodi:nodetypes="cccccscccc" - transform="translate(276,136)" /> - <path - style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583" - id="path8055" - sodipodi:nodetypes="czzzzzzczczczczzzc" /> - <path - style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate" - d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z" - id="path8057" - clip-path="url(#clipPath8622)" - sodipodi:nodetypes="cccccccccc" - transform="translate(276,136)" /> - <path - style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate" - d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z" - id="path8059" - clip-path="url(#clipPath8906)" - sodipodi:nodetypes="cczcccccc" - transform="translate(276,136)" /> - <path - transform="translate(450.03125,73.843964)" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new" - d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z" - id="path8061" - sodipodi:nodetypes="cccccccccccc" - clip-path="url(#clipPath3602)" /> - <path - style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" - d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z" - id="path8063" - sodipodi:nodetypes="czzzzzzzzcc" /> - <path - transform="translate(450.03125,73.843964)" - style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate" - d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z" - id="path8065" - sodipodi:nodetypes="czczzcc" - clip-path="url(#clipPath3992)" /> - <g - transform="translate(450.03125,73.843964)" - style="opacity:1;display:inline;enable-background:new" - id="g8067" - clip-path="url(#clipPath3986)"> - <g - transform="translate(-174.03125,62.156036)" - style="filter:url(#filter3677)" - id="g8069"> - <g - style="filter:url(#filter3785)" - id="g8071"> - <path - sodipodi:nodetypes="czzccccc" - id="path8073" - d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - transform="translate(174.03125,-62.156036)" /> - <rect - y="486.14224" - x="1197.8389" - height="309.71277" - width="333.75412" - id="rect8075" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - </g> - <g - transform="translate(-174.03125,62.156036)" - style="opacity:0.18000004;display:inline;enable-background:new" - id="g8077"> - <g - style="filter:url(#filter3785)" - id="g8079"> - <path - sodipodi:nodetypes="czzccccc" - id="path8081" - d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - transform="translate(174.03125,-62.156036)" /> - <rect - y="486.14224" - x="1197.8389" - height="309.71277" - width="333.75412" - id="rect8083" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - </g> - </g> - <path - transform="translate(450.03125,73.843964)" - style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate" - d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z" - id="path8085" - clip-path="url(#clipPath3722)" - sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" /> - <g - style="opacity:1;display:inline;enable-background:new" - id="g8087" - mask="url(#mask7704)" - transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)" - inkscape:transform-center-x="-185.09603" - inkscape:transform-center-y="-12.859654"> - <path - transform="translate(8.0045714e-2,-3.125e-2)" - style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z" - id="path8089" - sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" /> - <g - clip-path="url(#clipPath7421)" - id="g8091"> - <path - id="path8093" - d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new" - sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" /> - <path - id="path8095" - d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" /> - <path - id="path8097" - d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" /> - <path - id="path8099" - d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" /> - <path - id="path8101" - d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new" - sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" /> - <path - id="path8103" - d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" /> - <path - id="path8105" - d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" /> - <path - id="path8107" - d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" /> - <path - id="path8109" - d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" /> - <path - id="path8111" - d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" /> - <path - id="path8113" - d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" /> - <path - id="path8115" - d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" /> - <path - id="path8117" - d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" /> - <path - id="path8119" - d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z" - style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" /> - <g - id="g8121" - style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)"> - <path - sodipodi:nodetypes="czzzczzc" - id="path8123" - d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" /> - <path - sodipodi:nodetypes="czzzczzc" - id="path8125" - d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - sodipodi:nodetypes="czzzczzc" - id="path8127" - d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - sodipodi:nodetypes="czzzczzc" - id="path8129" - d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-4.3190906" - inkscape:transform-center-x="13.852145" - sodipodi:nodetypes="czzzczzc" - id="path8131" - d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-4.3190906" - inkscape:transform-center-x="13.852145" - sodipodi:nodetypes="czzzczzc" - id="path8133" - d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-4.3190906" - inkscape:transform-center-x="13.852145" - sodipodi:nodetypes="czzzczzc" - id="path8135" - d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-4.9269042" - inkscape:transform-center-x="13.64141" - sodipodi:nodetypes="czzzczzc" - id="path8137" - d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.1542119" - inkscape:transform-center-x="13.55068" - sodipodi:nodetypes="czzzczzc" - id="path8139" - d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.4740887" - inkscape:transform-center-x="13.41151" - sodipodi:nodetypes="czzzczzc" - id="path8141" - d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.79376" - inkscape:transform-center-x="13.258805" - sodipodi:nodetypes="czzzczzc" - id="path8143" - d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8145" - d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8147" - d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8149" - d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8151" - d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8153" - d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8155" - d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8157" - d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8159" - d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8161" - d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.7433893" - inkscape:transform-center-x="13.28378" - sodipodi:nodetypes="czzzczzc" - id="path8163" - d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-5.1360724" - inkscape:transform-center-x="13.55813" - sodipodi:nodetypes="czzzczzc" - id="path8165" - d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-4.6370147" - inkscape:transform-center-x="13.74758" - sodipodi:nodetypes="czzzczzc" - id="path8167" - d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - inkscape:transform-center-y="-4.4842392" - inkscape:transform-center-x="13.79933" - sodipodi:nodetypes="czzzczzc" - id="path8169" - d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" /> - <path - sodipodi:nodetypes="czczc" - id="path8171" - d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z" - style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" /> - </g> - <path - id="path8173" - d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new" - sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" /> - <path - id="path8175" - d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" /> - <path - id="path8177" - d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" /> - <path - id="path8179" - d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" /> - <path - id="path8181" - d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new" - sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" /> - <path - id="path8183" - d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" /> - <path - id="path8185" - d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" /> - <path - id="path8187" - d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" /> - <path - id="path8189" - d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" /> - <path - id="path8191" - d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" /> - <path - id="path8193" - d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" /> - <path - id="path8195" - d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" /> - <path - id="path8197" - d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" /> - <path - id="path8199" - d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z" - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" /> - </g> - </g> - <path - style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394" - id="path8201" - sodipodi:nodetypes="ccccccccc" /> - <path - style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033" - id="path8203" - sodipodi:nodetypes="ccccccccccc" /> - </g> - <g - inkscape:groupmode="layer" - id="layer15" - inkscape:label="Feet" - style="display:inline"> - <path - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate" - d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z" - id="path8994" /> - <path - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z" - id="path4189" - sodipodi:nodetypes="czzzzzzcccccccccczczz" /> - <path - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate" - d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z" - id="path4191" - sodipodi:nodetypes="cccccccccccccccccccccc" - clip-path="url(#clipPath3631)" - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" /> - <path - style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new" - d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z" - id="path4193" - clip-path="url(#clipPath3677)" - sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" /> - <g - id="g3617" - clip-path="url(#clipPath3622)" - transform="translate(276,136)"> - <path - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)" - id="path4195" - d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" /> - <path - sodipodi:nodetypes="ccccccccccccc" - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)" - id="path4197" - d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" /> - </g> - <path - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate" - d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z" - id="path4199" - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" /> - <path - style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new" - d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z" - id="path4201" - sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc" - clip-path="url(#clipPath4177)" - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" /> - <path - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate" - d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z" - id="path4203" - sodipodi:nodetypes="cccccccc" - clip-path="url(#clipPath3631)" - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" /> - <path - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate" - d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z" - id="path4205" - sodipodi:nodetypes="cccccccc" - clip-path="url(#clipPath3631)" - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" /> - <g - id="g8317" - style="filter:url(#filter8333)" - clip-path="url(#clipPath8338)" - transform="translate(276,136)"> - <path - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)" - clip-path="none" - sodipodi:nodetypes="ccccc" - id="path4209" - d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - <rect - y="757.19519" - x="-55" - height="177" - width="182" - id="rect8315" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - <g - id="g8346" - style="filter:url(#filter8354)" - clip-path="url(#clipPath8359)" - transform="translate(276,136)"> - <path - transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)" - clip-path="none" - sodipodi:nodetypes="ccccccc" - id="path4207" - d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - <rect - y="696.19519" - x="-22" - height="176" - width="165" - id="rect8344" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - </g> - <g - inkscape:groupmode="layer" - id="layer16" - inkscape:label="Left Foot" - style="display:inline"> - <path - style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" - d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z" - id="path8848" - sodipodi:nodetypes="czzzzzzcccccccccczczz" /> - <path - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate" - d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z" - id="path3635" - sodipodi:nodetypes="cccccccccccccccccccccc" - clip-path="url(#clipPath3631)" - transform="translate(276,136)" /> - <path - transform="translate(450.03125,73.843964)" - style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new" - d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z" - id="path3669" - clip-path="url(#clipPath3677)" - sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" /> - <g - id="g3628" - clip-path="url(#clipPath3636)" - transform="translate(276,136)"> - <path - id="path8988" - d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" /> - <path - id="path8990" - d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" /> - </g> - <path - style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate" - d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z" - id="path8992" /> - <path - transform="translate(450.03125,73.843964)" - style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new" - d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z" - id="path4149" - sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc" - clip-path="url(#clipPath4177)" /> - <path - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate" - d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z" - id="path3902" - sodipodi:nodetypes="cccccccc" - clip-path="url(#clipPath3631)" - transform="translate(276,136)" /> - <path - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate" - d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z" - id="path4135" - sodipodi:nodetypes="cccccccc" - clip-path="url(#clipPath3631)" - transform="translate(276,136)" /> - <g - id="g8367" - style="filter:url(#filter8379)" - clip-path="url(#clipPath8392)" - transform="translate(276,136)"> - <path - clip-path="none" - sodipodi:nodetypes="ccccccc" - id="path4145" - d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - <rect - y="650.19098" - x="877.51953" - height="172.53406" - width="123.03658" - id="rect8365" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - <g - id="g8400" - style="filter:url(#filter8404)" - clip-path="url(#clipPath8417)" - transform="translate(276,136)"> - <path - clip-path="none" - sodipodi:nodetypes="ccccc" - id="path4147" - d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z" - style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - <rect - y="677.06104" - x="924.89569" - height="125.1579" - width="142.12846" - id="rect8398" - style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" /> - </g> - </g> -</svg> diff --git a/Documentation/logo.txt b/Documentation/logo.txt index a2e62445e28e..296f0f7f67eb 100644 --- a/Documentation/logo.txt +++ b/Documentation/logo.txt @@ -1,4 +1,13 @@ -Tux is taking a three month sabbatical to work as a barber, so Tuz is -standing in. He's taken pains to ensure you'll hardly notice. +This is the full-colour version of the currently unofficial Linux logo +("currently unofficial" just means that there has been no paperwork and +that I have not really announced it yet). It was created by Larry Ewing, +and is freely usable as long as you acknowledge Larry as the original +artist. + +Note that there are black-and-white versions of this available that +scale down to smaller sizes and are better for letterheads or whatever +you want to use it for: for the full range of logos take a look at +Larry's web-page: + + http://www.isc.tamu.edu/~lewing/linux/ -Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA. diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 5ede7473b425..08762750f121 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -1242,7 +1242,7 @@ monitoring is enabled, and vice-versa. To add ARP targets: # echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target # echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target - NOTE: up to 10 target addresses may be specified. + NOTE: up to 16 target addresses may be specified. To remove an ARP target: # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 0ab0230cbcb0..d16b7a1c3793 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -43,12 +43,11 @@ Table of Contents 2) Representing devices without a current OF specification a) PHY nodes b) Interrupt controllers - c) CFI or JEDEC memory-mapped NOR flash - d) 4xx/Axon EMAC ethernet nodes - e) Xilinx IP cores - f) USB EHCI controllers - g) MDIO on GPIOs - h) SPI busses + c) 4xx/Axon EMAC ethernet nodes + d) Xilinx IP cores + e) USB EHCI controllers + f) MDIO on GPIOs + g) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -999,7 +998,7 @@ compatibility. translation of SOC addresses for memory mapped SOC registers. - bus-frequency: Contains the bus frequency for the SOC node. Typically, the value of this field is filled in by the boot - loader. + loader. Recommended properties: @@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model. device_type = "open-pic"; }; - c) CFI or JEDEC memory-mapped NOR flash - - Flash chips (Memory Technology Devices) are often used for solid state - file systems on embedded devices. - - - compatible : should contain the specific model of flash chip(s) - used, if known, followed by either "cfi-flash" or "jedec-flash" - - reg : Address range of the flash chip - - bank-width : Width (in bytes) of the flash bank. Equal to the - device width times the number of interleaved chips. - - device-width : (optional) Width of a single flash chip. If - omitted, assumed to be equal to 'bank-width'. - - #address-cells, #size-cells : Must be present if the flash has - sub-nodes representing partitions (see below). In this case - both #address-cells and #size-cells must be equal to 1. - - For JEDEC compatible devices, the following additional properties - are defined: - - - vendor-id : Contains the flash chip's vendor id (1 byte). - - device-id : Contains the flash chip's device id (1 byte). - - In addition to the information on the flash bank itself, the - device tree may optionally contain additional information - describing partitions of the flash address space. This can be - used on platforms which have strong conventions about which - portions of the flash are used for what purposes, but which don't - use an on-flash partition table such as RedBoot. - - Each partition is represented as a sub-node of the flash device. - Each node's name represents the name of the corresponding - partition of the flash device. - - Flash partitions - - reg : The partition's offset and size within the flash bank. - - label : (optional) The label / name for this flash partition. - If omitted, the label is taken from the node name (excluding - the unit address). - - read-only : (optional) This parameter, if present, is a hint to - Linux that this flash partition should only be mounted - read-only. This is usually used for flash partitions - containing early-boot firmware images or data which should not - be clobbered. - - Example: - - flash@ff000000 { - compatible = "amd,am29lv128ml", "cfi-flash"; - reg = <ff000000 01000000>; - bank-width = <4>; - device-width = <1>; - #address-cells = <1>; - #size-cells = <1>; - fs@0 { - label = "fs"; - reg = <0 f80000>; - }; - firmware@f80000 { - label ="firmware"; - reg = <f80000 80000>; - read-only; - }; - }; - - d) 4xx/Axon EMAC ethernet nodes + c) 4xx/Axon EMAC ethernet nodes The EMAC ethernet controller in IBM and AMCC 4xx chips, and also the Axon bridge. To operate this needs to interact with a ths @@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model. available. For Axon: 0x0000012a - e) Xilinx IP cores + d) Xilinx IP cores The Xilinx EDK toolchain ships with a set of IP cores (devices) for use in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range @@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model. listed above, nodes for these devices should include a phy-handle property, and may include other common network device properties like local-mac-address. - + iv) Xilinx Uartlite Xilinx uartlite devices are simple fixed speed serial ports. @@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model. - reg-offset : A value of 3 is required - reg-shift : A value of 2 is required - f) USB EHCI controllers + e) USB EHCI controllers Required properties: - compatible : should be "usb-ehci". @@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model. big-endian; }; - g) MDIO on GPIOs + f) MDIO on GPIOs Currently defined compatibles: - virtual,gpio-mdio @@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; - h) SPI (Serial Peripheral Interface) busses + g) SPI (Serial Peripheral Interface) busses SPI busses can be described with a node for the SPI master device and a set of child nodes for each SPI slave on the bus. For this diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index d0ab33e21fe6..b6d2e21474f9 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -7,8 +7,10 @@ Required properties : Recommended properties : - - compatible : Should be "fsl-i2c" for parts compatible with - Freescale I2C specifications. + - compatible : compatibility list with 2 entries, the first should + be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor, + e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one + should be "fsl-i2c". - interrupts : <a b> where a is the interrupt number and b is a field that represents an encoding of the sense and level information for the interrupt. This should be encoded based on @@ -16,17 +18,31 @@ Recommended properties : controller you have. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - - dfsrr : boolean; if defined, indicates that this I2C device has - a digital filter sampling rate register - - fsl5200-clocking : boolean; if defined, indicated that this device - uses the FSL 5200 clocking mechanism. - -Example : - i2c@3000 { - interrupt-parent = <40000>; - interrupts = <1b 3>; - reg = <3000 18>; - device_type = "i2c"; - compatible = "fsl-i2c"; - dfsrr; + - fsl,preserve-clocking : boolean; if defined, the clock settings + from the bootloader are preserved (not touched). + - clock-frequency : desired I2C bus clock frequency in Hz. + +Examples : + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + cell-index = <0>; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,preserve-clocking; }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + clock-frequency = <400000>; + }; + diff --git a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt index 84a04d5eb8e6..a48b2cadc7f0 100644 --- a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt +++ b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt @@ -5,9 +5,21 @@ Required properties: - reg : should specify localbus chip select and size used for the chip. - fsl,upm-addr-offset : UPM pattern offset for the address latch. - fsl,upm-cmd-offset : UPM pattern offset for the command latch. -- gpios : may specify optional GPIO connected to the Ready-Not-Busy pin. -Example: +Optional properties: +- fsl,upm-wait-flags : add chip-dependent short delays after running the + UPM pattern (0x1), after writing a data byte (0x2) or after + writing out a buffer (0x4). +- fsl,upm-addr-line-cs-offsets : address offsets for multi-chip support. + The corresponding address lines are used to select the chip. +- gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins + (R/B#). For multi-chip devices, "n" GPIO definitions are required + according to the number of chips. +- chip-delay : chip dependent delay for transfering data from array to + read registers (tR). Required if property "gpios" is not used + (R/B# pins not connected). + +Examples: upm@1,0 { compatible = "fsl,upm-nand"; @@ -26,3 +38,26 @@ upm@1,0 { }; }; }; + +upm@3,0 { + #address-cells = <0>; + #size-cells = <0>; + compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; + reg = <3 0x0 0x800>; + fsl,upm-addr-offset = <0x10>; + fsl,upm-cmd-offset = <0x08>; + /* Multi-chip NAND device */ + fsl,upm-addr-line-cs-offsets = <0x0 0x200>; + fsl,upm-wait-flags = <0x5>; + chip-delay = <25>; // in micro-seconds + + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fs"; + reg = <0x00000000 0x10000000>; + }; + }; +}; diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt index ff51f4c0fa9d..4fe14deedc0a 100644 --- a/Documentation/powerpc/dts-bindings/gpio/led.txt +++ b/Documentation/powerpc/dts-bindings/gpio/led.txt @@ -1,15 +1,43 @@ -LED connected to GPIO +LEDs connected to GPIO lines Required properties: -- compatible : should be "gpio-led". -- label : (optional) the label for this LED. If omitted, the label is +- compatible : should be "gpio-leds". + +Each LED is represented as a sub-node of the gpio-leds device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: +- gpios : Should specify the LED's GPIO, see "Specifying GPIO information + for devices" in Documentation/powerpc/booting-without-of.txt. Active + low LEDs should be indicated using flags in the GPIO specifier. +- label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). -- gpios : should specify LED GPIO. +- linux,default-trigger : (optional) This parameter, if present, is a + string defining the trigger assigned to the LED. Current triggers are: + "backlight" - LED will act as a back-light, controlled by the framebuffer + system + "default-on" - LED will turn on + "heartbeat" - LED "double" flashes at a load average based rate + "ide-disk" - LED indicates disk activity + "timer" - LED flashes at a fixed, configurable rate -Example: +Examples: -led@0 { - compatible = "gpio-led"; - label = "hdd"; - gpios = <&mcu_pio 0 1>; +leds { + compatible = "gpio-leds"; + hdd { + label = "IDE Activity"; + gpios = <&mcu_pio 0 1>; /* Active low */ + linux,default-trigger = "ide-disk"; + }; }; + +run-control { + compatible = "gpio-leds"; + red { + gpios = <&mpc8572 6 0>; + }; + green { + gpios = <&mpc8572 7 0>; + }; +} diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt new file mode 100644 index 000000000000..667c9bde8699 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt @@ -0,0 +1,80 @@ +CFI or JEDEC memory-mapped NOR flash + +Flash chips (Memory Technology Devices) are often used for solid state +file systems on embedded devices. + + - compatible : should contain the specific model of flash chip(s) + used, if known, followed by either "cfi-flash" or "jedec-flash" + - reg : Address range(s) of the flash chip(s) + It's possible to (optionally) define multiple "reg" tuples so that + non-identical NOR chips can be described in one flash node. + - bank-width : Width (in bytes) of the flash bank. Equal to the + device width times the number of interleaved chips. + - device-width : (optional) Width of a single flash chip. If + omitted, assumed to be equal to 'bank-width'. + - #address-cells, #size-cells : Must be present if the flash has + sub-nodes representing partitions (see below). In this case + both #address-cells and #size-cells must be equal to 1. + +For JEDEC compatible devices, the following additional properties +are defined: + + - vendor-id : Contains the flash chip's vendor id (1 byte). + - device-id : Contains the flash chip's device id (1 byte). + +In addition to the information on the flash bank itself, the +device tree may optionally contain additional information +describing partitions of the flash address space. This can be +used on platforms which have strong conventions about which +portions of the flash are used for what purposes, but which don't +use an on-flash partition table such as RedBoot. + +Each partition is represented as a sub-node of the flash device. +Each node's name represents the name of the corresponding +partition of the flash device. + +Flash partitions + - reg : The partition's offset and size within the flash bank. + - label : (optional) The label / name for this flash partition. + If omitted, the label is taken from the node name (excluding + the unit address). + - read-only : (optional) This parameter, if present, is a hint to + Linux that this flash partition should only be mounted + read-only. This is usually used for flash partitions + containing early-boot firmware images or data which should not + be clobbered. + +Example: + + flash@ff000000 { + compatible = "amd,am29lv128ml", "cfi-flash"; + reg = <ff000000 01000000>; + bank-width = <4>; + device-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + fs@0 { + label = "fs"; + reg = <0 f80000>; + }; + firmware@f80000 { + label ="firmware"; + reg = <f80000 80000>; + read-only; + }; + }; + +Here an example with multiple "reg" tuples: + + flash@f0000000,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,PC48F4400P0VB", "cfi-flash"; + reg = <0 0x00000000 0x02000000 + 0 0x02000000 0x02000000>; + bank-width = <2>; + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt index ddace3afc83b..30f643f611b2 100644 --- a/Documentation/scsi/aacraid.txt +++ b/Documentation/scsi/aacraid.txt @@ -60,17 +60,9 @@ Supported Cards/Chipsets 9005:0285:9005:02d5 Adaptec ASR-2405 (Voodoo40 Lite) 9005:0285:9005:02d6 Adaptec ASR-2445 (Voodoo44 Lite) 9005:0285:9005:02d7 Adaptec ASR-2805 (Voodoo80 Lite) - 9005:0285:9005:02d8 Adaptec 5405G (Voodoo40 PM) - 9005:0285:9005:02d9 Adaptec 5445G (Voodoo44 PM) - 9005:0285:9005:02da Adaptec 5805G (Voodoo80 PM) - 9005:0285:9005:02db Adaptec 5085G (Voodoo08 PM) - 9005:0285:9005:02dc Adaptec 51245G (Voodoo124 PM) - 9005:0285:9005:02dd Adaptec 51645G (Voodoo164 PM) - 9005:0285:9005:02de Adaptec 52445G (Voodoo244 PM) - 9005:0285:9005:02df Adaptec ASR-2045G (Voodoo04 Lite PM) - 9005:0285:9005:02e0 Adaptec ASR-2405G (Voodoo40 Lite PM) - 9005:0285:9005:02e1 Adaptec ASR-2445G (Voodoo44 Lite PM) - 9005:0285:9005:02e2 Adaptec ASR-2805G (Voodoo80 Lite PM) + 9005:0285:9005:02d8 Adaptec 5405Z (Voodoo40 BLBU) + 9005:0285:9005:02d9 Adaptec 5445Z (Voodoo44 BLBU) + 9005:0285:9005:02da Adaptec 5805Z (Voodoo80 BLBU) 1011:0046:9005:0364 Adaptec 5400S (Mustang) 1011:0046:9005:0365 Adaptec 5400S (Mustang) 9005:0287:9005:0800 Adaptec Themisto (Jupiter) @@ -140,6 +132,7 @@ Deanna Bonds (non-DASD support, PAE fibs and 64 bit, where fibs that go to the hardware are consistently called hw_fibs and not just fibs like the name of the driver tracking structure) Mark Salyzyn <Mark_Salyzyn@adaptec.com> Fixed panic issues and added some new product ids for upcoming hbas. Performance tuning, card failover and bug mitigations. +Achim Leubner <Achim_Leubner@adaptec.com> Original Driver ------------------------- diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index c5948f2f9a25..88b7433d2f11 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -169,7 +169,7 @@ PCI SSID look-up. What `model` option values are available depends on the codec chip. Check your codec chip from the codec proc file (see "Codec Proc-File" section below). It will show the vendor/product name of your codec -chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file, +chip. Then, see Documentation/sound/alsa/HD-Audio-Models.txt file, the section of HD-audio driver. You can find a list of codecs and `model` options belonging to each codec. For example, for Realtek ALC262 codec chip, pass `model=ultra` for devices that are compatible @@ -177,7 +177,7 @@ with Samsung Q1 Ultra. Thus, the first thing you can do for any brand-new, unsupported and non-working HD-audio hardware is to check HD-audio codec and several -different `model` option values. If you have a luck, some of them +different `model` option values. If you have any luck, some of them might suit with your device well. Some codecs such as ALC880 have a special model option `model=test`. diff --git a/Documentation/sound/alsa/soc/jack.txt b/Documentation/sound/alsa/soc/jack.txt new file mode 100644 index 000000000000..fcf82a417293 --- /dev/null +++ b/Documentation/sound/alsa/soc/jack.txt @@ -0,0 +1,71 @@ +ASoC jack detection +=================== + +ALSA has a standard API for representing physical jacks to user space, +the kernel side of which can be seen in include/sound/jack.h. ASoC +provides a version of this API adding two additional features: + + - It allows more than one jack detection method to work together on one + user visible jack. In embedded systems it is common for multiple + to be present on a single jack but handled by separate bits of + hardware. + + - Integration with DAPM, allowing DAPM endpoints to be updated + automatically based on the detected jack status (eg, turning off the + headphone outputs if no headphones are present). + +This is done by splitting the jacks up into three things working +together: the jack itself represented by a struct snd_soc_jack, sets of +snd_soc_jack_pins representing DAPM endpoints to update and blocks of +code providing jack reporting mechanisms. + +For example, a system may have a stereo headset jack with two reporting +mechanisms, one for the headphone and one for the microphone. Some +systems won't be able to use their speaker output while a headphone is +connected and so will want to make sure to update both speaker and +headphone when the headphone jack status changes. + +The jack - struct snd_soc_jack +============================== + +This represents a physical jack on the system and is what is visible to +user space. The jack itself is completely passive, it is set up by the +machine driver and updated by jack detection methods. + +Jacks are created by the machine driver calling snd_soc_jack_new(). + +snd_soc_jack_pin +================ + +These represent a DAPM pin to update depending on some of the status +bits supported by the jack. Each snd_soc_jack has zero or more of these +which are updated automatically. They are created by the machine driver +and associated with the jack using snd_soc_jack_add_pins(). The status +of the endpoint may configured to be the opposite of the jack status if +required (eg, enabling a built in microphone if a microphone is not +connected via a jack). + +Jack detection methods +====================== + +Actual jack detection is done by code which is able to monitor some +input to the system and update a jack by calling snd_soc_jack_report(), +specifying a subset of bits to update. The jack detection code should +be set up by the machine driver, taking configuration for the jack to +update and the set of things to report when the jack is connected. + +Often this is done based on the status of a GPIO - a handler for this is +provided by the snd_soc_jack_add_gpio() function. Other methods are +also available, for example integrated into CODECs. One example of +CODEC integrated jack detection can be see in the WM8350 driver. + +Each jack may have multiple reporting mechanisms, though it will need at +least one to be useful. + +Machine drivers +=============== + +These are all hooked together by the machine driver depending on the +system hardware. The machine driver will set up the snd_soc_jack and +the list of pins to update then set up one or more jack detection +mechanisms to update that jack based on their current status. diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt index 42f43fa59f24..34c76a55bc04 100644 --- a/Documentation/sparse.txt +++ b/Documentation/sparse.txt @@ -42,6 +42,14 @@ sure that bitwise types don't get mixed up (little-endian vs big-endian vs cpu-endian vs whatever), and there the constant "0" really _is_ special. +__bitwise__ - to be used for relatively compact stuff (gfp_t, etc.) that +is mostly warning-free and is supposed to stay that way. Warnings will +be generated without __CHECK_ENDIAN__. + +__bitwise - noisy stuff; in particular, __le*/__be* are that. We really +don't want to drown in noise unless we'd explicitly asked for it. + + Getting sparse ~~~~~~~~~~~~~~ diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 0f5122eb282b..4a02d2508bc8 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -511,10 +511,16 @@ SPI MASTER METHODS This sets up the device clock rate, SPI mode, and word sizes. Drivers may change the defaults provided by board_info, and then call spi_setup(spi) to invoke this routine. It may sleep. + Unless each SPI slave has its own configuration registers, don't change them right away ... otherwise drivers could corrupt I/O that's in progress for other SPI devices. + ** BUG ALERT: for some reason the first version of + ** many spi_master drivers seems to get this wrong. + ** When you code setup(), ASSUME that the controller + ** is actively processing transfers for another device. + master->transfer(struct spi_device *spi, struct spi_message *message) This must not sleep. Its responsibility is arrange that the transfer happens and its complete() callback is issued. The two diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index a34d55b65441..df38ef046f8d 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -95,7 +95,7 @@ of struct cmsghdr structures with appended data. There is only one file in this directory. unix_dgram_qlen limits the max number of datagrams queued in Unix domain -socket's buffer. It will not take effect unless PF_UNIX flag is spicified. +socket's buffer. It will not take effect unless PF_UNIX flag is specified. 3. /proc/sys/net/ipv4 - IPV4 settings diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 3197fc83bc51..c302ddf629a0 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -88,6 +88,10 @@ will itself start writeback. If dirty_bytes is written, dirty_ratio becomes a function of its value (dirty_bytes / the amount of dirtyable system memory). +Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any +value lower than this limit will be ignored and the old configuration will be +retained. + ============================================================== dirty_expire_centisecs diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index 6049a2a84dda..5d8bc2cd250c 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -113,7 +113,7 @@ versions of the sysfs interface. "devices" directory at /sys/subsystem/<name>/devices. If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be - ignored. If it does not exist, you have always to scan all three + ignored. If it does not exist, you always have to scan all three places, as the kernel is free to move a subsystem from one place to the other, as long as the devices are still reachable by the same subsystem name. diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt index afa2946892da..cf42b820ff9d 100644 --- a/Documentation/sysrq.txt +++ b/Documentation/sysrq.txt @@ -115,6 +115,8 @@ On all - write a character to /proc/sysrq-trigger. e.g.: 'x' - Used by xmon interface on ppc/powerpc platforms. +'z' - Dump the ftrace buffer + '0'-'9' - Sets the console log level, controlling which kernel messages will be printed to your console. ('0', for example would make it so that only emergency messages like PANICs or OOPSes would diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt new file mode 100644 index 000000000000..b3a232cae7f8 --- /dev/null +++ b/Documentation/tomoyo.txt @@ -0,0 +1,55 @@ +--- What is TOMOYO? --- + +TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel. + +LiveCD-based tutorials are available at +http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/ +http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ . +Though these tutorials use non-LSM version of TOMOYO, they are useful for you +to know what TOMOYO is. + +--- How to enable TOMOYO? --- + +Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on +kernel's command line. + +Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details. + +--- Where is documentation? --- + +User <-> Kernel interface documentation is available at +http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html . + +Materials we prepared for seminars and symposiums are available at +http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 . +Below lists are chosen from three aspects. + +What is TOMOYO? + TOMOYO Linux Overview + http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf + TOMOYO Linux: pragmatic and manageable security for Linux + http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf + TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box + http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf + +What can TOMOYO do? + Deep inside TOMOYO Linux + http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf + The role of "pathname based access control" in security. + http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf + +History of TOMOYO? + Realities of Mainlining + http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf + +--- What is future plan? --- + +We believe that inode based security and name based security are complementary +and both should be used together. But unfortunately, so far, we cannot enable +multiple LSM modules at the same time. We feel sorry that you have to give up +SELinux/SMACK/AppArmor etc. when you want to use TOMOYO. + +We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM +version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ . +LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning +to port non-LSM version's functionalities to LSM versions. diff --git a/Documentation/ftrace.txt b/Documentation/trace/ftrace.txt index 803b1318b13d..fd9a3e693813 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -15,31 +15,31 @@ Introduction Ftrace is an internal tracer designed to help out developers and designers of systems to find what is going on inside the kernel. -It can be used for debugging or analyzing latencies and performance -issues that take place outside of user-space. +It can be used for debugging or analyzing latencies and +performance issues that take place outside of user-space. Although ftrace is the function tracer, it also includes an -infrastructure that allows for other types of tracing. Some of the -tracers that are currently in ftrace include a tracer to trace -context switches, the time it takes for a high priority task to -run after it was woken up, the time interrupts are disabled, and -more (ftrace allows for tracer plugins, which means that the list of -tracers can always grow). +infrastructure that allows for other types of tracing. Some of +the tracers that are currently in ftrace include a tracer to +trace context switches, the time it takes for a high priority +task to run after it was woken up, the time interrupts are +disabled, and more (ftrace allows for tracer plugins, which +means that the list of tracers can always grow). The File System --------------- -Ftrace uses the debugfs file system to hold the control files as well -as the files to display output. +Ftrace uses the debugfs file system to hold the control files as +well as the files to display output. To mount the debugfs system: # mkdir /debug # mount -t debugfs nodev /debug -(Note: it is more common to mount at /sys/kernel/debug, but for simplicity - this document will use /debug) +( Note: it is more common to mount at /sys/kernel/debug, but for + simplicity this document will use /debug) That's it! (assuming that you have ftrace configured into your kernel) @@ -50,90 +50,124 @@ of ftrace. Here is a list of some of the key files: Note: all time values are in microseconds. - current_tracer: This is used to set or display the current tracer - that is configured. - - available_tracers: This holds the different types of tracers that - have been compiled into the kernel. The tracers - listed here can be configured by echoing their name - into current_tracer. - - tracing_enabled: This sets or displays whether the current_tracer - is activated and tracing or not. Echo 0 into this - file to disable the tracer or 1 to enable it. - - trace: This file holds the output of the trace in a human readable - format (described below). - - latency_trace: This file shows the same trace but the information - is organized more to display possible latencies - in the system (described below). - - trace_pipe: The output is the same as the "trace" file but this - file is meant to be streamed with live tracing. - Reads from this file will block until new data - is retrieved. Unlike the "trace" and "latency_trace" - files, this file is a consumer. This means reading - from this file causes sequential reads to display - more current data. Once data is read from this - file, it is consumed, and will not be read - again with a sequential read. The "trace" and - "latency_trace" files are static, and if the - tracer is not adding more data, they will display - the same information every time they are read. - - trace_options: This file lets the user control the amount of data - that is displayed in one of the above output - files. - - trace_max_latency: Some of the tracers record the max latency. - For example, the time interrupts are disabled. - This time is saved in this file. The max trace - will also be stored, and displayed by either - "trace" or "latency_trace". A new max trace will - only be recorded if the latency is greater than - the value in this file. (in microseconds) - - buffer_size_kb: This sets or displays the number of kilobytes each CPU - buffer can hold. The tracer buffers are the same size - for each CPU. The displayed number is the size of the - CPU buffer and not total size of all buffers. The - trace buffers are allocated in pages (blocks of memory - that the kernel uses for allocation, usually 4 KB in size). - If the last page allocated has room for more bytes - than requested, the rest of the page will be used, - making the actual allocation bigger than requested. - (Note, the size may not be a multiple of the page size due - to buffer managment overhead.) - - This can only be updated when the current_tracer - is set to "nop". - - tracing_cpumask: This is a mask that lets the user only trace - on specified CPUS. The format is a hex string - representing the CPUS. - - set_ftrace_filter: When dynamic ftrace is configured in (see the - section below "dynamic ftrace"), the code is dynamically - modified (code text rewrite) to disable calling of the - function profiler (mcount). This lets tracing be configured - in with practically no overhead in performance. This also - has a side effect of enabling or disabling specific functions - to be traced. Echoing names of functions into this file - will limit the trace to only those functions. - - set_ftrace_notrace: This has an effect opposite to that of - set_ftrace_filter. Any function that is added here will not - be traced. If a function exists in both set_ftrace_filter - and set_ftrace_notrace, the function will _not_ be traced. - - set_ftrace_pid: Have the function tracer only trace a single thread. - - available_filter_functions: This lists the functions that ftrace - has processed and can trace. These are the function - names that you can pass to "set_ftrace_filter" or - "set_ftrace_notrace". (See the section "dynamic ftrace" - below for more details.) + current_tracer: + + This is used to set or display the current tracer + that is configured. + + available_tracers: + + This holds the different types of tracers that + have been compiled into the kernel. The + tracers listed here can be configured by + echoing their name into current_tracer. + + tracing_enabled: + + This sets or displays whether the current_tracer + is activated and tracing or not. Echo 0 into this + file to disable the tracer or 1 to enable it. + + trace: + + This file holds the output of the trace in a human + readable format (described below). + + latency_trace: + + This file shows the same trace but the information + is organized more to display possible latencies + in the system (described below). + + trace_pipe: + + The output is the same as the "trace" file but this + file is meant to be streamed with live tracing. + Reads from this file will block until new data + is retrieved. Unlike the "trace" and "latency_trace" + files, this file is a consumer. This means reading + from this file causes sequential reads to display + more current data. Once data is read from this + file, it is consumed, and will not be read + again with a sequential read. The "trace" and + "latency_trace" files are static, and if the + tracer is not adding more data, they will display + the same information every time they are read. + + trace_options: + + This file lets the user control the amount of data + that is displayed in one of the above output + files. + + tracing_max_latency: + + Some of the tracers record the max latency. + For example, the time interrupts are disabled. + This time is saved in this file. The max trace + will also be stored, and displayed by either + "trace" or "latency_trace". A new max trace will + only be recorded if the latency is greater than + the value in this file. (in microseconds) + + buffer_size_kb: + + This sets or displays the number of kilobytes each CPU + buffer can hold. The tracer buffers are the same size + for each CPU. The displayed number is the size of the + CPU buffer and not total size of all buffers. The + trace buffers are allocated in pages (blocks of memory + that the kernel uses for allocation, usually 4 KB in size). + If the last page allocated has room for more bytes + than requested, the rest of the page will be used, + making the actual allocation bigger than requested. + ( Note, the size may not be a multiple of the page size + due to buffer managment overhead. ) + + This can only be updated when the current_tracer + is set to "nop". + + tracing_cpumask: + + This is a mask that lets the user only trace + on specified CPUS. The format is a hex string + representing the CPUS. + + set_ftrace_filter: + + When dynamic ftrace is configured in (see the + section below "dynamic ftrace"), the code is dynamically + modified (code text rewrite) to disable calling of the + function profiler (mcount). This lets tracing be configured + in with practically no overhead in performance. This also + has a side effect of enabling or disabling specific functions + to be traced. Echoing names of functions into this file + will limit the trace to only those functions. + + set_ftrace_notrace: + + This has an effect opposite to that of + set_ftrace_filter. Any function that is added here will not + be traced. If a function exists in both set_ftrace_filter + and set_ftrace_notrace, the function will _not_ be traced. + + set_ftrace_pid: + + Have the function tracer only trace a single thread. + + set_graph_function: + + Set a "trigger" function where tracing should start + with the function graph tracer (See the section + "dynamic ftrace" for more details). + + available_filter_functions: + + This lists the functions that ftrace + has processed and can trace. These are the function + names that you can pass to "set_ftrace_filter" or + "set_ftrace_notrace". (See the section "dynamic ftrace" + below for more details.) The Tracers @@ -141,36 +175,66 @@ The Tracers Here is the list of current tracers that may be configured. - function - function tracer that uses mcount to trace all functions. + "function" + + Function call tracer to trace all kernel functions. + + "function_graph_tracer" + + Similar to the function tracer except that the + function tracer probes the functions on their entry + whereas the function graph tracer traces on both entry + and exit of the functions. It then provides the ability + to draw a graph of function calls similar to C code + source. - sched_switch - traces the context switches between tasks. + "sched_switch" - irqsoff - traces the areas that disable interrupts and saves - the trace with the longest max latency. - See tracing_max_latency. When a new max is recorded, - it replaces the old trace. It is best to view this - trace via the latency_trace file. + Traces the context switches and wakeups between tasks. - preemptoff - Similar to irqsoff but traces and records the amount of - time for which preemption is disabled. + "irqsoff" - preemptirqsoff - Similar to irqsoff and preemptoff, but traces and - records the largest time for which irqs and/or preemption - is disabled. + Traces the areas that disable interrupts and saves + the trace with the longest max latency. + See tracing_max_latency. When a new max is recorded, + it replaces the old trace. It is best to view this + trace via the latency_trace file. - wakeup - Traces and records the max latency that it takes for - the highest priority task to get scheduled after - it has been woken up. + "preemptoff" - nop - This is not a tracer. To remove all tracers from tracing - simply echo "nop" into current_tracer. + Similar to irqsoff but traces and records the amount of + time for which preemption is disabled. + + "preemptirqsoff" + + Similar to irqsoff and preemptoff, but traces and + records the largest time for which irqs and/or preemption + is disabled. + + "wakeup" + + Traces and records the max latency that it takes for + the highest priority task to get scheduled after + it has been woken up. + + "hw-branch-tracer" + + Uses the BTS CPU feature on x86 CPUs to traces all + branches executed. + + "nop" + + This is the "trace nothing" tracer. To remove all + tracers from tracing simply echo "nop" into + current_tracer. Examples of using the tracer ---------------------------- -Here are typical examples of using the tracers when controlling them only -with the debugfs interface (without using any user-land utilities). +Here are typical examples of using the tracers when controlling +them only with the debugfs interface (without using any +user-land utilities). Output format: -------------- @@ -187,16 +251,16 @@ Here is an example of the output format of the file "trace" bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput -------- -A header is printed with the tracer name that is represented by the trace. -In this case the tracer is "function". Then a header showing the format. Task -name "bash", the task PID "4251", the CPU that it was running on -"01", the timestamp in <secs>.<usecs> format, the function name that was -traced "path_put" and the parent function that called this function -"path_walk". The timestamp is the time at which the function was -entered. +A header is printed with the tracer name that is represented by +the trace. In this case the tracer is "function". Then a header +showing the format. Task name "bash", the task PID "4251", the +CPU that it was running on "01", the timestamp in <secs>.<usecs> +format, the function name that was traced "path_put" and the +parent function that called this function "path_walk". The +timestamp is the time at which the function was entered. -The sched_switch tracer also includes tracing of task wakeups and -context switches. +The sched_switch tracer also includes tracing of task wakeups +and context switches. ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S @@ -205,8 +269,8 @@ context switches. kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R -Wake ups are represented by a "+" and the context switches are shown as -"==>". The format is: +Wake ups are represented by a "+" and the context switches are +shown as "==>". The format is: Context switches: @@ -220,19 +284,20 @@ Wake ups are represented by a "+" and the context switches are shown as <pid>:<prio>:<state> + <pid>:<prio>:<state> -The prio is the internal kernel priority, which is the inverse of the -priority that is usually displayed by user-space tools. Zero represents -the highest priority (99). Prio 100 starts the "nice" priorities with -100 being equal to nice -20 and 139 being nice 19. The prio "140" is -reserved for the idle task which is the lowest priority thread (pid 0). +The prio is the internal kernel priority, which is the inverse +of the priority that is usually displayed by user-space tools. +Zero represents the highest priority (99). Prio 100 starts the +"nice" priorities with 100 being equal to nice -20 and 139 being +nice 19. The prio "140" is reserved for the idle task which is +the lowest priority thread (pid 0). Latency trace format -------------------- -For traces that display latency times, the latency_trace file gives -somewhat more information to see why a latency happened. Here is a typical -trace. +For traces that display latency times, the latency_trace file +gives somewhat more information to see why a latency happened. +Here is a typical trace. # tracer: irqsoff # @@ -259,20 +324,20 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 <idle>-0 0d.s1 98us : trace_hardirqs_on (do_softirq) +This shows that the current tracer is "irqsoff" tracing the time +for which interrupts were disabled. It gives the trace version +and the version of the kernel upon which this was executed on +(2.6.26-rc8). Then it displays the max latency in microsecs (97 +us). The number of trace entries displayed and the total number +recorded (both are three: #3/3). The type of preemption that was +used (PREEMPT). VP, KP, SP, and HP are always zero and are +reserved for later use. #P is the number of online CPUS (#P:2). -This shows that the current tracer is "irqsoff" tracing the time for which -interrupts were disabled. It gives the trace version and the version -of the kernel upon which this was executed on (2.6.26-rc8). Then it displays -the max latency in microsecs (97 us). The number of trace entries displayed -and the total number recorded (both are three: #3/3). The type of -preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero -and are reserved for later use. #P is the number of online CPUS (#P:2). - -The task is the process that was running when the latency occurred. -(swapper pid: 0). +The task is the process that was running when the latency +occurred. (swapper pid: 0). -The start and stop (the functions in which the interrupts were disabled and -enabled respectively) that caused the latencies: +The start and stop (the functions in which the interrupts were +disabled and enabled respectively) that caused the latencies: apic_timer_interrupt is where the interrupts were disabled. do_softirq is where they were enabled again. @@ -308,12 +373,12 @@ The above is mostly meaningful for kernel developers. latency_trace file is relative to the start of the trace. delay: This is just to help catch your eye a bit better. And - needs to be fixed to be only relative to the same CPU. - The marks are determined by the difference between this - current trace and the next trace. - '!' - greater than preempt_mark_thresh (default 100) - '+' - greater than 1 microsecond - ' ' - less than or equal to 1 microsecond. + needs to be fixed to be only relative to the same CPU. + The marks are determined by the difference between this + current trace and the next trace. + '!' - greater than preempt_mark_thresh (default 100) + '+' - greater than 1 microsecond + ' ' - less than or equal to 1 microsecond. The rest is the same as the 'trace' file. @@ -321,14 +386,15 @@ The above is mostly meaningful for kernel developers. trace_options ------------- -The trace_options file is used to control what gets printed in the trace -output. To see what is available, simply cat the file: +The trace_options file is used to control what gets printed in +the trace output. To see what is available, simply cat the file: cat /debug/tracing/trace_options print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ - noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj + noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj -To disable one of the options, echo in the option prepended with "no". +To disable one of the options, echo in the option prepended with +"no". echo noprint-parent > /debug/tracing/trace_options @@ -338,8 +404,8 @@ To enable an option, leave off the "no". Here are the available options: - print-parent - On function traces, display the calling function - as well as the function being traced. + print-parent - On function traces, display the calling (parent) + function as well as the function being traced. print-parent: bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul @@ -348,15 +414,16 @@ Here are the available options: bash-4000 [01] 1477.606694: simple_strtoul - sym-offset - Display not only the function name, but also the offset - in the function. For example, instead of seeing just - "ktime_get", you will see "ktime_get+0xb/0x20". + sym-offset - Display not only the function name, but also the + offset in the function. For example, instead of + seeing just "ktime_get", you will see + "ktime_get+0xb/0x20". sym-offset: bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0 - sym-addr - this will also display the function address as well as - the function name. + sym-addr - this will also display the function address as well + as the function name. sym-addr: bash-4000 [01] 1477.606694: simple_strtoul <c0339346> @@ -366,35 +433,41 @@ Here are the available options: bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ (+0.000ms): simple_strtoul (strict_strtoul) - raw - This will display raw numbers. This option is best for use with - user applications that can translate the raw numbers better than - having it done in the kernel. + raw - This will display raw numbers. This option is best for + use with user applications that can translate the raw + numbers better than having it done in the kernel. - hex - Similar to raw, but the numbers will be in a hexadecimal format. + hex - Similar to raw, but the numbers will be in a hexadecimal + format. bin - This will print out the formats in raw binary. block - TBD (needs update) - stacktrace - This is one of the options that changes the trace itself. - When a trace is recorded, so is the stack of functions. - This allows for back traces of trace sites. + stacktrace - This is one of the options that changes the trace + itself. When a trace is recorded, so is the stack + of functions. This allows for back traces of + trace sites. - userstacktrace - This option changes the trace. - It records a stacktrace of the current userspace thread. + userstacktrace - This option changes the trace. It records a + stacktrace of the current userspace thread. - sym-userobj - when user stacktrace are enabled, look up which object the - address belongs to, and print a relative address - This is especially useful when ASLR is on, otherwise you don't - get a chance to resolve the address to object/file/line after the app is no - longer running + sym-userobj - when user stacktrace are enabled, look up which + object the address belongs to, and print a + relative address. This is especially useful when + ASLR is on, otherwise you don't get a chance to + resolve the address to object/file/line after + the app is no longer running - The lookup is performed when you read trace,trace_pipe,latency_trace. Example: + The lookup is performed when you read + trace,trace_pipe,latency_trace. Example: a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0 x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] - sched-tree - TBD (any users??) + sched-tree - trace all tasks that are on the runqueue, at + every scheduling event. Will add overhead if + there's a lot of tasks running at once. sched_switch @@ -431,18 +504,19 @@ of how to use it. [...] -As we have discussed previously about this format, the header shows -the name of the trace and points to the options. The "FUNCTION" -is a misnomer since here it represents the wake ups and context -switches. +As we have discussed previously about this format, the header +shows the name of the trace and points to the options. The +"FUNCTION" is a misnomer since here it represents the wake ups +and context switches. -The sched_switch file only lists the wake ups (represented with '+') -and context switches ('==>') with the previous task or current task -first followed by the next task or task waking up. The format for both -of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO -is the inverse of the actual priority with zero (0) being the highest -priority and the nice values starting at 100 (nice -20). Below is -a quick chart to map the kernel priority to user land priorities. +The sched_switch file only lists the wake ups (represented with +'+') and context switches ('==>') with the previous task or +current task first followed by the next task or task waking up. +The format for both of these is PID:KERNEL-PRIO:TASK-STATE. +Remember that the KERNEL-PRIO is the inverse of the actual +priority with zero (0) being the highest priority and the nice +values starting at 100 (nice -20). Below is a quick chart to map +the kernel priority to user land priorities. Kernel priority: 0 to 99 ==> user RT priority 99 to 0 Kernel priority: 100 to 139 ==> user nice -20 to 19 @@ -463,10 +537,10 @@ The task states are: ftrace_enabled -------------- -The following tracers (listed below) give different output depending -on whether or not the sysctl ftrace_enabled is set. To set ftrace_enabled, -one can either use the sysctl function or set it via the proc -file system interface. +The following tracers (listed below) give different output +depending on whether or not the sysctl ftrace_enabled is set. To +set ftrace_enabled, one can either use the sysctl function or +set it via the proc file system interface. sysctl kernel.ftrace_enabled=1 @@ -474,12 +548,12 @@ file system interface. echo 1 > /proc/sys/kernel/ftrace_enabled -To disable ftrace_enabled simply replace the '1' with '0' in -the above commands. +To disable ftrace_enabled simply replace the '1' with '0' in the +above commands. -When ftrace_enabled is set the tracers will also record the functions -that are within the trace. The descriptions of the tracers -will also show an example with ftrace enabled. +When ftrace_enabled is set the tracers will also record the +functions that are within the trace. The descriptions of the +tracers will also show an example with ftrace enabled. irqsoff @@ -487,17 +561,18 @@ irqsoff When interrupts are disabled, the CPU can not react to any other external event (besides NMIs and SMIs). This prevents the timer -interrupt from triggering or the mouse interrupt from letting the -kernel know of a new mouse event. The result is a latency with the -reaction time. +interrupt from triggering or the mouse interrupt from letting +the kernel know of a new mouse event. The result is a latency +with the reaction time. -The irqsoff tracer tracks the time for which interrupts are disabled. -When a new maximum latency is hit, the tracer saves the trace leading up -to that latency point so that every time a new maximum is reached, the old -saved trace is discarded and the new trace is saved. +The irqsoff tracer tracks the time for which interrupts are +disabled. When a new maximum latency is hit, the tracer saves +the trace leading up to that latency point so that every time a +new maximum is reached, the old saved trace is discarded and the +new trace is saved. -To reset the maximum, echo 0 into tracing_max_latency. Here is an -example: +To reset the maximum, echo 0 into tracing_max_latency. Here is +an example: # echo irqsoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -532,10 +607,11 @@ irqsoff latency trace v1.1.5 on 2.6.26 Here we see that that we had a latency of 12 microsecs (which is -very good). The _write_lock_irq in sys_setpgid disabled interrupts. -The difference between the 12 and the displayed timestamp 14us occurred -because the clock was incremented between the time of recording the max -latency and the time of recording the function that had that latency. +very good). The _write_lock_irq in sys_setpgid disabled +interrupts. The difference between the 12 and the displayed +timestamp 14us occurred because the clock was incremented +between the time of recording the max latency and the time of +recording the function that had that latency. Note the above example had ftrace_enabled not set. If we set the ftrace_enabled, we get a much larger output: @@ -586,24 +662,24 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 Here we traced a 50 microsecond latency. But we also see all the -functions that were called during that time. Note that by enabling -function tracing, we incur an added overhead. This overhead may -extend the latency times. But nevertheless, this trace has provided -some very helpful debugging information. +functions that were called during that time. Note that by +enabling function tracing, we incur an added overhead. This +overhead may extend the latency times. But nevertheless, this +trace has provided some very helpful debugging information. preemptoff ---------- -When preemption is disabled, we may be able to receive interrupts but -the task cannot be preempted and a higher priority task must wait -for preemption to be enabled again before it can preempt a lower -priority task. +When preemption is disabled, we may be able to receive +interrupts but the task cannot be preempted and a higher +priority task must wait for preemption to be enabled again +before it can preempt a lower priority task. The preemptoff tracer traces the places that disable preemption. -Like the irqsoff tracer, it records the maximum latency for which preemption -was disabled. The control of preemptoff tracer is much like the irqsoff -tracer. +Like the irqsoff tracer, it records the maximum latency for +which preemption was disabled. The control of preemptoff tracer +is much like the irqsoff tracer. # echo preemptoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -637,11 +713,12 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) -This has some more changes. Preemption was disabled when an interrupt -came in (notice the 'h'), and was enabled while doing a softirq. -(notice the 's'). But we also see that interrupts have been disabled -when entering the preempt off section and leaving it (the 'd'). -We do not know if interrupts were enabled in the mean time. +This has some more changes. Preemption was disabled when an +interrupt came in (notice the 'h'), and was enabled while doing +a softirq. (notice the 's'). But we also see that interrupts +have been disabled when entering the preempt off section and +leaving it (the 'd'). We do not know if interrupts were enabled +in the mean time. # tracer: preemptoff # @@ -700,28 +777,30 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq) -The above is an example of the preemptoff trace with ftrace_enabled -set. Here we see that interrupts were disabled the entire time. -The irq_enter code lets us know that we entered an interrupt 'h'. -Before that, the functions being traced still show that it is not -in an interrupt, but we can see from the functions themselves that -this is not the case. +The above is an example of the preemptoff trace with +ftrace_enabled set. Here we see that interrupts were disabled +the entire time. The irq_enter code lets us know that we entered +an interrupt 'h'. Before that, the functions being traced still +show that it is not in an interrupt, but we can see from the +functions themselves that this is not the case. -Notice that __do_softirq when called does not have a preempt_count. -It may seem that we missed a preempt enabling. What really happened -is that the preempt count is held on the thread's stack and we -switched to the softirq stack (4K stacks in effect). The code -does not copy the preempt count, but because interrupts are disabled, -we do not need to worry about it. Having a tracer like this is good -for letting people know what really happens inside the kernel. +Notice that __do_softirq when called does not have a +preempt_count. It may seem that we missed a preempt enabling. +What really happened is that the preempt count is held on the +thread's stack and we switched to the softirq stack (4K stacks +in effect). The code does not copy the preempt count, but +because interrupts are disabled, we do not need to worry about +it. Having a tracer like this is good for letting people know +what really happens inside the kernel. preemptirqsoff -------------- -Knowing the locations that have interrupts disabled or preemption -disabled for the longest times is helpful. But sometimes we would -like to know when either preemption and/or interrupts are disabled. +Knowing the locations that have interrupts disabled or +preemption disabled for the longest times is helpful. But +sometimes we would like to know when either preemption and/or +interrupts are disabled. Consider the following code: @@ -741,11 +820,13 @@ The preemptoff tracer will record the total length of call_function_with_irqs_and_preemption_off() and call_function_with_preemption_off(). -But neither will trace the time that interrupts and/or preemption -is disabled. This total time is the time that we can not schedule. -To record this time, use the preemptirqsoff tracer. +But neither will trace the time that interrupts and/or +preemption is disabled. This total time is the time that we can +not schedule. To record this time, use the preemptirqsoff +tracer. -Again, using this trace is much like the irqsoff and preemptoff tracers. +Again, using this trace is much like the irqsoff and preemptoff +tracers. # echo preemptirqsoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -781,9 +862,10 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 The trace_hardirqs_off_thunk is called from assembly on x86 when -interrupts are disabled in the assembly code. Without the function -tracing, we do not know if interrupts were enabled within the preemption -points. We do see that it started with preemption enabled. +interrupts are disabled in the assembly code. Without the +function tracing, we do not know if interrupts were enabled +within the preemption points. We do see that it started with +preemption enabled. Here is a trace with ftrace_enabled set: @@ -871,40 +953,42 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq) -This is a very interesting trace. It started with the preemption of -the ls task. We see that the task had the "need_resched" bit set -via the 'N' in the trace. Interrupts were disabled before the spin_lock -at the beginning of the trace. We see that a schedule took place to run -sshd. When the interrupts were enabled, we took an interrupt. -On return from the interrupt handler, the softirq ran. We took another -interrupt while running the softirq as we see from the capital 'H'. +This is a very interesting trace. It started with the preemption +of the ls task. We see that the task had the "need_resched" bit +set via the 'N' in the trace. Interrupts were disabled before +the spin_lock at the beginning of the trace. We see that a +schedule took place to run sshd. When the interrupts were +enabled, we took an interrupt. On return from the interrupt +handler, the softirq ran. We took another interrupt while +running the softirq as we see from the capital 'H'. wakeup ------ -In a Real-Time environment it is very important to know the wakeup -time it takes for the highest priority task that is woken up to the -time that it executes. This is also known as "schedule latency". -I stress the point that this is about RT tasks. It is also important -to know the scheduling latency of non-RT tasks, but the average -schedule latency is better for non-RT tasks. Tools like -LatencyTop are more appropriate for such measurements. +In a Real-Time environment it is very important to know the +wakeup time it takes for the highest priority task that is woken +up to the time that it executes. This is also known as "schedule +latency". I stress the point that this is about RT tasks. It is +also important to know the scheduling latency of non-RT tasks, +but the average schedule latency is better for non-RT tasks. +Tools like LatencyTop are more appropriate for such +measurements. Real-Time environments are interested in the worst case latency. -That is the longest latency it takes for something to happen, and -not the average. We can have a very fast scheduler that may only -have a large latency once in a while, but that would not work well -with Real-Time tasks. The wakeup tracer was designed to record -the worst case wakeups of RT tasks. Non-RT tasks are not recorded -because the tracer only records one worst case and tracing non-RT -tasks that are unpredictable will overwrite the worst case latency -of RT tasks. - -Since this tracer only deals with RT tasks, we will run this slightly -differently than we did with the previous tracers. Instead of performing -an 'ls', we will run 'sleep 1' under 'chrt' which changes the -priority of the task. +That is the longest latency it takes for something to happen, +and not the average. We can have a very fast scheduler that may +only have a large latency once in a while, but that would not +work well with Real-Time tasks. The wakeup tracer was designed +to record the worst case wakeups of RT tasks. Non-RT tasks are +not recorded because the tracer only records one worst case and +tracing non-RT tasks that are unpredictable will overwrite the +worst case latency of RT tasks. + +Since this tracer only deals with RT tasks, we will run this +slightly differently than we did with the previous tracers. +Instead of performing an 'ls', we will run 'sleep 1' under +'chrt' which changes the priority of the task. # echo wakeup > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -934,17 +1018,16 @@ wakeup latency trace v1.1.5 on 2.6.26-rc8 <idle>-0 1d..4 4us : schedule (cpu_idle) +Running this on an idle system, we see that it only took 4 +microseconds to perform the task switch. Note, since the trace +marker in the schedule is before the actual "switch", we stop +the tracing when the recorded task is about to schedule in. This +may change if we add a new marker at the end of the scheduler. -Running this on an idle system, we see that it only took 4 microseconds -to perform the task switch. Note, since the trace marker in the -schedule is before the actual "switch", we stop the tracing when -the recorded task is about to schedule in. This may change if -we add a new marker at the end of the scheduler. - -Notice that the recorded task is 'sleep' with the PID of 4901 and it -has an rt_prio of 5. This priority is user-space priority and not -the internal kernel priority. The policy is 1 for SCHED_FIFO and 2 -for SCHED_RR. +Notice that the recorded task is 'sleep' with the PID of 4901 +and it has an rt_prio of 5. This priority is user-space priority +and not the internal kernel priority. The policy is 1 for +SCHED_FIFO and 2 for SCHED_RR. Doing the same with chrt -r 5 and ftrace_enabled set. @@ -1001,24 +1084,25 @@ ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline) ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) ksoftirq-7 1d..4 50us : schedule (__cond_resched) -The interrupt went off while running ksoftirqd. This task runs at -SCHED_OTHER. Why did not we see the 'N' set early? This may be -a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K stacks -configured, the interrupt and softirq run with their own stack. -Some information is held on the top of the task's stack (need_resched -and preempt_count are both stored there). The setting of the NEED_RESCHED -bit is done directly to the task's stack, but the reading of the -NEED_RESCHED is done by looking at the current stack, which in this case -is the stack for the hard interrupt. This hides the fact that NEED_RESCHED -has been set. We do not see the 'N' until we switch back to the task's +The interrupt went off while running ksoftirqd. This task runs +at SCHED_OTHER. Why did not we see the 'N' set early? This may +be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K +stacks configured, the interrupt and softirq run with their own +stack. Some information is held on the top of the task's stack +(need_resched and preempt_count are both stored there). The +setting of the NEED_RESCHED bit is done directly to the task's +stack, but the reading of the NEED_RESCHED is done by looking at +the current stack, which in this case is the stack for the hard +interrupt. This hides the fact that NEED_RESCHED has been set. +We do not see the 'N' until we switch back to the task's assigned stack. function -------- This tracer is the function tracer. Enabling the function tracer -can be done from the debug file system. Make sure the ftrace_enabled is -set; otherwise this tracer is a nop. +can be done from the debug file system. Make sure the +ftrace_enabled is set; otherwise this tracer is a nop. # sysctl kernel.ftrace_enabled=1 # echo function > /debug/tracing/current_tracer @@ -1048,14 +1132,15 @@ set; otherwise this tracer is a nop. [...] -Note: function tracer uses ring buffers to store the above entries. -The newest data may overwrite the oldest data. Sometimes using echo to -stop the trace is not sufficient because the tracing could have overwritten -the data that you wanted to record. For this reason, it is sometimes better to -disable tracing directly from a program. This allows you to stop the -tracing at the point that you hit the part that you are interested in. -To disable the tracing directly from a C program, something like following -code snippet can be used: +Note: function tracer uses ring buffers to store the above +entries. The newest data may overwrite the oldest data. +Sometimes using echo to stop the trace is not sufficient because +the tracing could have overwritten the data that you wanted to +record. For this reason, it is sometimes better to disable +tracing directly from a program. This allows you to stop the +tracing at the point that you hit the part that you are +interested in. To disable the tracing directly from a C program, +something like following code snippet can be used: int trace_fd; [...] @@ -1070,10 +1155,10 @@ int main(int argc, char *argv[]) { } Note: Here we hard coded the path name. The debugfs mount is not -guaranteed to be at /debug (and is more commonly at /sys/kernel/debug). -For simple one time traces, the above is sufficent. For anything else, -a search through /proc/mounts may be needed to find where the debugfs -file-system is mounted. +guaranteed to be at /debug (and is more commonly at +/sys/kernel/debug). For simple one time traces, the above is +sufficent. For anything else, a search through /proc/mounts may +be needed to find where the debugfs file-system is mounted. Single thread tracing @@ -1152,49 +1237,297 @@ int main (int argc, char **argv) return 0; } + +hw-branch-tracer (x86 only) +--------------------------- + +This tracer uses the x86 last branch tracing hardware feature to +collect a branch trace on all cpus with relatively low overhead. + +The tracer uses a fixed-size circular buffer per cpu and only +traces ring 0 branches. The trace file dumps that buffer in the +following format: + +# tracer: hw-branch-tracer +# +# CPU# TO <- FROM + 0 scheduler_tick+0xb5/0x1bf <- task_tick_idle+0x5/0x6 + 2 run_posix_cpu_timers+0x2b/0x72a <- run_posix_cpu_timers+0x25/0x72a + 0 scheduler_tick+0x139/0x1bf <- scheduler_tick+0xed/0x1bf + 0 scheduler_tick+0x17c/0x1bf <- scheduler_tick+0x148/0x1bf + 2 run_posix_cpu_timers+0x9e/0x72a <- run_posix_cpu_timers+0x5e/0x72a + 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf + + +The tracer may be used to dump the trace for the oops'ing cpu on +a kernel oops into the system log. To enable this, +ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one +can either use the sysctl function or set it via the proc system +interface. + + sysctl kernel.ftrace_dump_on_oops=1 + +or + + echo 1 > /proc/sys/kernel/ftrace_dump_on_oops + + +Here's an example of such a dump after a null pointer +dereference in a kernel module: + +[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 +[57848.106019] IP: [<ffffffffa0000006>] open+0x6/0x14 [oops] +[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0 +[57848.106019] Oops: 0002 [#1] SMP +[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus +[57848.106019] Dumping ftrace buffer: +[57848.106019] --------------------------------- +[...] +[57848.106019] 0 chrdev_open+0xe6/0x165 <- cdev_put+0x23/0x24 +[57848.106019] 0 chrdev_open+0x117/0x165 <- chrdev_open+0xfa/0x165 +[57848.106019] 0 chrdev_open+0x120/0x165 <- chrdev_open+0x11c/0x165 +[57848.106019] 0 chrdev_open+0x134/0x165 <- chrdev_open+0x12b/0x165 +[57848.106019] 0 open+0x0/0x14 [oops] <- chrdev_open+0x144/0x165 +[57848.106019] 0 page_fault+0x0/0x30 <- open+0x6/0x14 [oops] +[57848.106019] 0 error_entry+0x0/0x5b <- page_fault+0x4/0x30 +[57848.106019] 0 error_kernelspace+0x0/0x31 <- error_entry+0x59/0x5b +[57848.106019] 0 error_sti+0x0/0x1 <- error_kernelspace+0x2d/0x31 +[57848.106019] 0 page_fault+0x9/0x30 <- error_sti+0x0/0x1 +[57848.106019] 0 do_page_fault+0x0/0x881 <- page_fault+0x1a/0x30 +[...] +[57848.106019] 0 do_page_fault+0x66b/0x881 <- is_prefetch+0x1ee/0x1f2 +[57848.106019] 0 do_page_fault+0x6e0/0x881 <- do_page_fault+0x67a/0x881 +[57848.106019] 0 oops_begin+0x0/0x96 <- do_page_fault+0x6e0/0x881 +[57848.106019] 0 trace_hw_branch_oops+0x0/0x2d <- oops_begin+0x9/0x96 +[...] +[57848.106019] 0 ds_suspend_bts+0x2a/0xe3 <- ds_suspend_bts+0x1a/0xe3 +[57848.106019] --------------------------------- +[57848.106019] CPU 0 +[57848.106019] Modules linked in: oops +[57848.106019] Pid: 5542, comm: cat Tainted: G W 2.6.28 #23 +[57848.106019] RIP: 0010:[<ffffffffa0000006>] [<ffffffffa0000006>] open+0x6/0x14 [oops] +[57848.106019] RSP: 0018:ffff880235457d48 EFLAGS: 00010246 +[...] + + +function graph tracer +--------------------------- + +This tracer is similar to the function tracer except that it +probes a function on its entry and its exit. This is done by +using a dynamically allocated stack of return addresses in each +task_struct. On function entry the tracer overwrites the return +address of each function traced to set a custom probe. Thus the +original return address is stored on the stack of return address +in the task_struct. + +Probing on both ends of a function leads to special features +such as: + +- measure of a function's time execution +- having a reliable call stack to draw function calls graph + +This tracer is useful in several situations: + +- you want to find the reason of a strange kernel behavior and + need to see what happens in detail on any areas (or specific + ones). + +- you are experiencing weird latencies but it's difficult to + find its origin. + +- you want to find quickly which path is taken by a specific + function + +- you just want to peek inside a working kernel and want to see + what happens there. + +# tracer: function_graph +# +# CPU DURATION FUNCTION CALLS +# | | | | | | | + + 0) | sys_open() { + 0) | do_sys_open() { + 0) | getname() { + 0) | kmem_cache_alloc() { + 0) 1.382 us | __might_sleep(); + 0) 2.478 us | } + 0) | strncpy_from_user() { + 0) | might_fault() { + 0) 1.389 us | __might_sleep(); + 0) 2.553 us | } + 0) 3.807 us | } + 0) 7.876 us | } + 0) | alloc_fd() { + 0) 0.668 us | _spin_lock(); + 0) 0.570 us | expand_files(); + 0) 0.586 us | _spin_unlock(); + + +There are several columns that can be dynamically +enabled/disabled. You can use every combination of options you +want, depending on your needs. + +- The cpu number on which the function executed is default + enabled. It is sometimes better to only trace one cpu (see + tracing_cpu_mask file) or you might sometimes see unordered + function calls while cpu tracing switch. + + hide: echo nofuncgraph-cpu > /debug/tracing/trace_options + show: echo funcgraph-cpu > /debug/tracing/trace_options + +- The duration (function's time of execution) is displayed on + the closing bracket line of a function or on the same line + than the current function in case of a leaf one. It is default + enabled. + + hide: echo nofuncgraph-duration > /debug/tracing/trace_options + show: echo funcgraph-duration > /debug/tracing/trace_options + +- The overhead field precedes the duration field in case of + reached duration thresholds. + + hide: echo nofuncgraph-overhead > /debug/tracing/trace_options + show: echo funcgraph-overhead > /debug/tracing/trace_options + depends on: funcgraph-duration + + ie: + + 0) | up_write() { + 0) 0.646 us | _spin_lock_irqsave(); + 0) 0.684 us | _spin_unlock_irqrestore(); + 0) 3.123 us | } + 0) 0.548 us | fput(); + 0) + 58.628 us | } + + [...] + + 0) | putname() { + 0) | kmem_cache_free() { + 0) 0.518 us | __phys_addr(); + 0) 1.757 us | } + 0) 2.861 us | } + 0) ! 115.305 us | } + 0) ! 116.402 us | } + + + means that the function exceeded 10 usecs. + ! means that the function exceeded 100 usecs. + + +- The task/pid field displays the thread cmdline and pid which + executed the function. It is default disabled. + + hide: echo nofuncgraph-proc > /debug/tracing/trace_options + show: echo funcgraph-proc > /debug/tracing/trace_options + + ie: + + # tracer: function_graph + # + # CPU TASK/PID DURATION FUNCTION CALLS + # | | | | | | | | | + 0) sh-4802 | | d_free() { + 0) sh-4802 | | call_rcu() { + 0) sh-4802 | | __call_rcu() { + 0) sh-4802 | 0.616 us | rcu_process_gp_end(); + 0) sh-4802 | 0.586 us | check_for_new_grace_period(); + 0) sh-4802 | 2.899 us | } + 0) sh-4802 | 4.040 us | } + 0) sh-4802 | 5.151 us | } + 0) sh-4802 | + 49.370 us | } + + +- The absolute time field is an absolute timestamp given by the + system clock since it started. A snapshot of this time is + given on each entry/exit of functions + + hide: echo nofuncgraph-abstime > /debug/tracing/trace_options + show: echo funcgraph-abstime > /debug/tracing/trace_options + + ie: + + # + # TIME CPU DURATION FUNCTION CALLS + # | | | | | | | | + 360.774522 | 1) 0.541 us | } + 360.774522 | 1) 4.663 us | } + 360.774523 | 1) 0.541 us | __wake_up_bit(); + 360.774524 | 1) 6.796 us | } + 360.774524 | 1) 7.952 us | } + 360.774525 | 1) 9.063 us | } + 360.774525 | 1) 0.615 us | journal_mark_dirty(); + 360.774527 | 1) 0.578 us | __brelse(); + 360.774528 | 1) | reiserfs_prepare_for_journal() { + 360.774528 | 1) | unlock_buffer() { + 360.774529 | 1) | wake_up_bit() { + 360.774529 | 1) | bit_waitqueue() { + 360.774530 | 1) 0.594 us | __phys_addr(); + + +You can put some comments on specific functions by using +trace_printk() For example, if you want to put a comment inside +the __might_sleep() function, you just have to include +<linux/ftrace.h> and call trace_printk() inside __might_sleep() + +trace_printk("I'm a comment!\n") + +will produce: + + 1) | __might_sleep() { + 1) | /* I'm a comment! */ + 1) 1.449 us | } + + +You might find other useful features for this tracer in the +following "dynamic ftrace" section such as tracing only specific +functions or tasks. + dynamic ftrace -------------- If CONFIG_DYNAMIC_FTRACE is set, the system will run with virtually no overhead when function tracing is disabled. The way this works is the mcount function call (placed at the start of -every kernel function, produced by the -pg switch in gcc), starts -of pointing to a simple return. (Enabling FTRACE will include the --pg switch in the compiling of the kernel.) +every kernel function, produced by the -pg switch in gcc), +starts of pointing to a simple return. (Enabling FTRACE will +include the -pg switch in the compiling of the kernel.) At compile time every C file object is run through the recordmcount.pl script (located in the scripts directory). This script will process the C object using objdump to find all the -locations in the .text section that call mcount. (Note, only -the .text section is processed, since processing other sections -like .init.text may cause races due to those sections being freed). +locations in the .text section that call mcount. (Note, only the +.text section is processed, since processing other sections like +.init.text may cause races due to those sections being freed). -A new section called "__mcount_loc" is created that holds references -to all the mcount call sites in the .text section. This section is -compiled back into the original object. The final linker will add -all these references into a single table. +A new section called "__mcount_loc" is created that holds +references to all the mcount call sites in the .text section. +This section is compiled back into the original object. The +final linker will add all these references into a single table. On boot up, before SMP is initialized, the dynamic ftrace code -scans this table and updates all the locations into nops. It also -records the locations, which are added to the available_filter_functions -list. Modules are processed as they are loaded and before they are -executed. When a module is unloaded, it also removes its functions from -the ftrace function list. This is automatic in the module unload -code, and the module author does not need to worry about it. - -When tracing is enabled, kstop_machine is called to prevent races -with the CPUS executing code being modified (which can cause the -CPU to do undesireable things), and the nops are patched back -to calls. But this time, they do not call mcount (which is just -a function stub). They now call into the ftrace infrastructure. +scans this table and updates all the locations into nops. It +also records the locations, which are added to the +available_filter_functions list. Modules are processed as they +are loaded and before they are executed. When a module is +unloaded, it also removes its functions from the ftrace function +list. This is automatic in the module unload code, and the +module author does not need to worry about it. + +When tracing is enabled, kstop_machine is called to prevent +races with the CPUS executing code being modified (which can +cause the CPU to do undesireable things), and the nops are +patched back to calls. But this time, they do not call mcount +(which is just a function stub). They now call into the ftrace +infrastructure. One special side-effect to the recording of the functions being traced is that we can now selectively choose which functions we -wish to trace and which ones we want the mcount calls to remain as -nops. +wish to trace and which ones we want the mcount calls to remain +as nops. -Two files are used, one for enabling and one for disabling the tracing -of specified functions. They are: +Two files are used, one for enabling and one for disabling the +tracing of specified functions. They are: set_ftrace_filter @@ -1202,8 +1535,8 @@ and set_ftrace_notrace -A list of available functions that you can add to these files is listed -in: +A list of available functions that you can add to these files is +listed in: available_filter_functions @@ -1240,8 +1573,8 @@ hrtimer_interrupt sys_nanosleep -Perhaps this is not enough. The filters also allow simple wild cards. -Only the following are currently available +Perhaps this is not enough. The filters also allow simple wild +cards. Only the following are currently available <match>* - will match functions that begin with <match> *<match> - will match functions that end with <match> @@ -1251,9 +1584,9 @@ These are the only wild cards which are supported. <match>*<match> will not work. -Note: It is better to use quotes to enclose the wild cards, otherwise - the shell may expand the parameters into names of files in the local - directory. +Note: It is better to use quotes to enclose the wild cards, + otherwise the shell may expand the parameters into names + of files in the local directory. # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter @@ -1299,7 +1632,8 @@ This is because the '>' and '>>' act just like they do in bash. To rewrite the filters, use '>' To append to the filters, use '>>' -To clear out a filter so that all functions will be recorded again: +To clear out a filter so that all functions will be recorded +again: # echo > /debug/tracing/set_ftrace_filter # cat /debug/tracing/set_ftrace_filter @@ -1331,7 +1665,8 @@ hrtimer_get_res hrtimer_init_sleeper -The set_ftrace_notrace prevents those functions from being traced. +The set_ftrace_notrace prevents those functions from being +traced. # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace @@ -1353,13 +1688,75 @@ Produces: We can see that there's no more lock or preempt tracing. + +Dynamic ftrace with the function graph tracer +--------------------------------------------- + +Although what has been explained above concerns both the +function tracer and the function-graph-tracer, there are some +special features only available in the function-graph tracer. + +If you want to trace only one function and all of its children, +you just have to echo its name into set_graph_function: + + echo __do_fault > set_graph_function + +will produce the following "expanded" trace of the __do_fault() +function: + + 0) | __do_fault() { + 0) | filemap_fault() { + 0) | find_lock_page() { + 0) 0.804 us | find_get_page(); + 0) | __might_sleep() { + 0) 1.329 us | } + 0) 3.904 us | } + 0) 4.979 us | } + 0) 0.653 us | _spin_lock(); + 0) 0.578 us | page_add_file_rmap(); + 0) 0.525 us | native_set_pte_at(); + 0) 0.585 us | _spin_unlock(); + 0) | unlock_page() { + 0) 0.541 us | page_waitqueue(); + 0) 0.639 us | __wake_up_bit(); + 0) 2.786 us | } + 0) + 14.237 us | } + 0) | __do_fault() { + 0) | filemap_fault() { + 0) | find_lock_page() { + 0) 0.698 us | find_get_page(); + 0) | __might_sleep() { + 0) 1.412 us | } + 0) 3.950 us | } + 0) 5.098 us | } + 0) 0.631 us | _spin_lock(); + 0) 0.571 us | page_add_file_rmap(); + 0) 0.526 us | native_set_pte_at(); + 0) 0.586 us | _spin_unlock(); + 0) | unlock_page() { + 0) 0.533 us | page_waitqueue(); + 0) 0.638 us | __wake_up_bit(); + 0) 2.793 us | } + 0) + 14.012 us | } + +You can also expand several functions at once: + + echo sys_open > set_graph_function + echo sys_close >> set_graph_function + +Now if you want to go back to trace all functions you can clear +this special filter via: + + echo > set_graph_function + + trace_pipe ---------- -The trace_pipe outputs the same content as the trace file, but the effect -on the tracing is different. Every read from trace_pipe is consumed. -This means that subsequent reads will be different. The trace -is live. +The trace_pipe outputs the same content as the trace file, but +the effect on the tracing is different. Every read from +trace_pipe is consumed. This means that subsequent reads will be +different. The trace is live. # echo function > /debug/tracing/current_tracer # cat /debug/tracing/trace_pipe > /tmp/trace.out & @@ -1387,38 +1784,45 @@ is live. bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up -Note, reading the trace_pipe file will block until more input is added. -By changing the tracer, trace_pipe will issue an EOF. We needed -to set the function tracer _before_ we "cat" the trace_pipe file. +Note, reading the trace_pipe file will block until more input is +added. By changing the tracer, trace_pipe will issue an EOF. We +needed to set the function tracer _before_ we "cat" the +trace_pipe file. trace entries ------------- -Having too much or not enough data can be troublesome in diagnosing -an issue in the kernel. The file buffer_size_kb is used to modify -the size of the internal trace buffers. The number listed -is the number of entries that can be recorded per CPU. To know -the full size, multiply the number of possible CPUS with the -number of entries. +Having too much or not enough data can be troublesome in +diagnosing an issue in the kernel. The file buffer_size_kb is +used to modify the size of the internal trace buffers. The +number listed is the number of entries that can be recorded per +CPU. To know the full size, multiply the number of possible CPUS +with the number of entries. # cat /debug/tracing/buffer_size_kb 1408 (units kilobytes) -Note, to modify this, you must have tracing completely disabled. To do that, -echo "nop" into the current_tracer. If the current_tracer is not set -to "nop", an EINVAL error will be returned. +Note, to modify this, you must have tracing completely disabled. +To do that, echo "nop" into the current_tracer. If the +current_tracer is not set to "nop", an EINVAL error will be +returned. # echo nop > /debug/tracing/current_tracer # echo 10000 > /debug/tracing/buffer_size_kb # cat /debug/tracing/buffer_size_kb 10000 (units kilobytes) -The number of pages which will be allocated is limited to a percentage -of available memory. Allocating too much will produce an error. +The number of pages which will be allocated is limited to a +percentage of available memory. Allocating too much will produce +an error. # echo 1000000000000 > /debug/tracing/buffer_size_kb -bash: echo: write error: Cannot allocate memory # cat /debug/tracing/buffer_size_kb 85 +----------- + +More details can be found in the source code, in the +kernel/tracing/*.c files. diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt new file mode 100644 index 000000000000..a956d9b7f943 --- /dev/null +++ b/Documentation/trace/kmemtrace.txt @@ -0,0 +1,126 @@ + kmemtrace - Kernel Memory Tracer + + by Eduard - Gabriel Munteanu + <eduard.munteanu@linux360.ro> + +I. Introduction +=============== + +kmemtrace helps kernel developers figure out two things: +1) how different allocators (SLAB, SLUB etc.) perform +2) how kernel code allocates memory and how much + +To do this, we trace every allocation and export information to the userspace +through the relay interface. We export things such as the number of requested +bytes, the number of bytes actually allocated (i.e. including internal +fragmentation), whether this is a slab allocation or a plain kmalloc() and so +on. + +The actual analysis is performed by a userspace tool (see section III for +details on where to get it from). It logs the data exported by the kernel, +processes it and (as of writing this) can provide the following information: +- the total amount of memory allocated and fragmentation per call-site +- the amount of memory allocated and fragmentation per allocation +- total memory allocated and fragmentation in the collected dataset +- number of cross-CPU allocation and frees (makes sense in NUMA environments) + +Moreover, it can potentially find inconsistent and erroneous behavior in +kernel code, such as using slab free functions on kmalloc'ed memory or +allocating less memory than requested (but not truly failed allocations). + +kmemtrace also makes provisions for tracing on some arch and analysing the +data on another. + +II. Design and goals +==================== + +kmemtrace was designed to handle rather large amounts of data. Thus, it uses +the relay interface to export whatever is logged to userspace, which then +stores it. Analysis and reporting is done asynchronously, that is, after the +data is collected and stored. By design, it allows one to log and analyse +on different machines and different arches. + +As of writing this, the ABI is not considered stable, though it might not +change much. However, no guarantees are made about compatibility yet. When +deemed stable, the ABI should still allow easy extension while maintaining +backward compatibility. This is described further in Documentation/ABI. + +Summary of design goals: + - allow logging and analysis to be done across different machines + - be fast and anticipate usage in high-load environments (*) + - be reasonably extensible + - make it possible for GNU/Linux distributions to have kmemtrace + included in their repositories + +(*) - one of the reasons Pekka Enberg's original userspace data analysis + tool's code was rewritten from Perl to C (although this is more than a + simple conversion) + + +III. Quick usage guide +====================== + +1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable +CONFIG_KMEMTRACE). + +2) Get the userspace tool and build it: +$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository +$ cd kmemtrace-user/ +$ ./autogen.sh +$ ./configure +$ make + +3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the +'single' runlevel (so that relay buffers don't fill up easily), and run +kmemtrace: +# '$' does not mean user, but root here. +$ mount -t debugfs none /sys/kernel/debug +$ mount -t proc none /proc +$ cd path/to/kmemtrace-user/ +$ ./kmemtraced +Wait a bit, then stop it with CTRL+C. +$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't + # overrun, should + # be zero. +$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to + check its correctness] +$ ./kmemtrace-report + +Now you should have a nice and short summary of how the allocator performs. + +IV. FAQ and known issues +======================== + +Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix +this? Should I worry? +A: If it's non-zero, this affects kmemtrace's accuracy, depending on how +large the number is. You can fix it by supplying a higher +'kmemtrace.subbufs=N' kernel parameter. +--- + +Q: kmemtrace_check reports errors, how do I fix this? Should I worry? +A: This is a bug and should be reported. It can occur for a variety of +reasons: + - possible bugs in relay code + - possible misuse of relay by kmemtrace + - timestamps being collected unorderly +Or you may fix it yourself and send us a patch. +--- + +Q: kmemtrace_report shows many errors, how do I fix this? Should I worry? +A: This is a known issue and I'm working on it. These might be true errors +in kernel code, which may have inconsistent behavior (e.g. allocating memory +with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed +out this behavior may work with SLAB, but may fail with other allocators. + +It may also be due to lack of tracing in some unusual allocator functions. + +We don't want bug reports regarding this issue yet. +--- + +V. See also +=========== + +Documentation/kernel-parameters.txt +Documentation/ABI/testing/debugfs-kmemtrace + diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/trace/mmiotrace.txt index 5731c67abc55..5731c67abc55 100644 --- a/Documentation/tracers/mmiotrace.txt +++ b/Documentation/trace/mmiotrace.txt diff --git a/Documentation/tracepoints.txt b/Documentation/trace/tracepoints.txt index 6f0a044f5b5e..c0e1ceed75a4 100644 --- a/Documentation/tracepoints.txt +++ b/Documentation/trace/tracepoints.txt @@ -45,8 +45,8 @@ In include/trace/subsys.h : #include <linux/tracepoint.h> DECLARE_TRACE(subsys_eventname, - TPPROTO(int firstarg, struct task_struct *p), - TPARGS(firstarg, p)); + TP_PROTO(int firstarg, struct task_struct *p), + TP_ARGS(firstarg, p)); In subsys/file.c (where the tracing statement must be added) : @@ -66,10 +66,10 @@ Where : - subsys is the name of your subsystem. - eventname is the name of the event to trace. -- TPPROTO(int firstarg, struct task_struct *p) is the prototype of the +- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the function called by this tracepoint. -- TPARGS(firstarg, p) are the parameters names, same as found in the +- TP_ARGS(firstarg, p) are the parameters names, same as found in the prototype. Connecting a function (probe) to a tracepoint is done by providing a @@ -103,13 +103,14 @@ used to export the defined tracepoints. * Probe / tracepoint example -See the example provided in samples/tracepoints/src +See the example provided in samples/tracepoints -Compile them with your kernel. +Compile them with your kernel. They are built during 'make' (not +'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m. Run, as root : -modprobe tracepoint-example (insmod order is not important) -modprobe tracepoint-probe-example -cat /proc/tracepoint-example (returns an expected error) -rmmod tracepoint-example tracepoint-probe-example +modprobe tracepoint-sample (insmod order is not important) +modprobe tracepoint-probe-sample +cat /proc/tracepoint-sample (returns an expected error) +rmmod tracepoint-sample tracepoint-probe-sample dmesg diff --git a/Documentation/video4linux/pxa_camera.txt b/Documentation/video4linux/pxa_camera.txt new file mode 100644 index 000000000000..b1137f9a53eb --- /dev/null +++ b/Documentation/video4linux/pxa_camera.txt @@ -0,0 +1,125 @@ + PXA-Camera Host Driver + ====================== + +Constraints +----------- + a) Image size for YUV422P format + All YUV422P images are enforced to have width x height % 16 = 0. + This is due to DMA constraints, which transfers only planes of 8 byte + multiples. + + +Global video workflow +--------------------- + a) QCI stopped + Initialy, the QCI interface is stopped. + When a buffer is queued (pxa_videobuf_ops->buf_queue), the QCI starts. + + b) QCI started + More buffers can be queued while the QCI is started without halting the + capture. The new buffers are "appended" at the tail of the DMA chain, and + smoothly captured one frame after the other. + + Once a buffer is filled in the QCI interface, it is marked as "DONE" and + removed from the active buffers list. It can be then requeud or dequeued by + userland application. + + Once the last buffer is filled in, the QCI interface stops. + + +DMA usage +--------- + a) DMA flow + - first buffer queued for capture + Once a first buffer is queued for capture, the QCI is started, but data + transfer is not started. On "End Of Frame" interrupt, the irq handler + starts the DMA chain. + - capture of one videobuffer + The DMA chain starts transfering data into videobuffer RAM pages. + When all pages are transfered, the DMA irq is raised on "ENDINTR" status + - finishing one videobuffer + The DMA irq handler marks the videobuffer as "done", and removes it from + the active running queue + Meanwhile, the next videobuffer (if there is one), is transfered by DMA + - finishing the last videobuffer + On the DMA irq of the last videobuffer, the QCI is stopped. + + b) DMA prepared buffer will have this structure + + +------------+-----+---------------+-----------------+ + | desc-sg[0] | ... | desc-sg[last] | finisher/linker | + +------------+-----+---------------+-----------------+ + + This structure is pointed by dma->sg_cpu. + The descriptors are used as follows : + - desc-sg[i]: i-th descriptor, transfering the i-th sg + element to the video buffer scatter gather + - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN + - linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0 + + For the next schema, let's assume d0=desc-sg[0] .. dN=desc-sg[N], + "f" stands for finisher and "l" for linker. + A typical running chain is : + + Videobuffer 1 Videobuffer 2 + +---------+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+---+ + | | + +----+ + + After the chaining is finished, the chain looks like : + + Videobuffer 1 Videobuffer 2 Videobuffer 3 + +---------+----+---+ +----+----+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+ + | | | | + +----+ +----+ + new_link + + c) DMA hot chaining timeslice issue + + As DMA chaining is done while DMA _is_ running, the linking may be done + while the DMA jumps from one Videobuffer to another. On the schema, that + would be a problem if the following sequence is encountered : + + - DMA chain is Videobuffer1 + Videobuffer2 + - pxa_videobuf_queue() is called to queue Videobuffer3 + - DMA controller finishes Videobuffer2, and DMA stops + => + Videobuffer 1 Videobuffer 2 + +---------+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-^-+ + | | | + +----+ +-- DMA DDADR loads DDADR_STOP + + - pxa_dma_add_tail_buf() is called, the Videobuffer2 "finisher" is + replaced by a "linker" to Videobuffer3 (creation of new_link) + - pxa_videobuf_queue() finishes + - the DMA irq handler is called, which terminates Videobuffer2 + - Videobuffer3 capture is not scheduled on DMA chain (as it stopped !!!) + + Videobuffer 1 Videobuffer 2 Videobuffer 3 + +---------+----+---+ +----+----+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+ + | | | | + +----+ +----+ + new_link + DMA DDADR still is DDADR_STOP + + - pxa_camera_check_link_miss() is called + This checks if the DMA is finished and a buffer is still on the + pcdev->capture list. If that's the case, the capture will be restarted, + and Videobuffer3 is scheduled on DMA chain. + - the DMA irq handler finishes + + Note: if DMA stops just after pxa_camera_check_link_miss() reads DDADR() + value, we have the guarantee that the DMA irq handler will be called back + when the DMA will finish the buffer, and pxa_camera_check_link_miss() will + be called again, to reschedule Videobuffer3. + +-- +Author: Robert Jarzmik <robert.jarzmik@free.fr> diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index a31177390e55..854808b67fae 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -90,7 +90,7 @@ up before calling v4l2_device_register then it will be untouched. If dev is NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register. The first 'dev' argument is normally the struct device pointer of a pci_dev, -usb_device or platform_device. It is rare for dev to be NULL, but it happens +usb_interface or platform_device. It is rare for dev to be NULL, but it happens with ISA devices or when one device creates multiple PCI devices, thus making it impossible to associate v4l2_dev with a particular parent. @@ -351,17 +351,6 @@ And this to go from an i2c_client to a v4l2_subdev struct: struct v4l2_subdev *sd = i2c_get_clientdata(client); -Finally you need to make a command function to make driver->command() -call the right subdev_ops functions: - -static int subdev_command(struct i2c_client *client, unsigned cmd, void *arg) -{ - return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg); -} - -If driver->command is never used then you can leave this out. Eventually the -driver->command usage should be removed from v4l. - Make sure to call v4l2_device_unregister_subdev(sd) when the remove() callback is called. This will unregister the sub-device from the bridge driver. It is safe to call this even if the sub-device was never registered. @@ -375,14 +364,12 @@ from the remove() callback ensures that this is always done correctly. The bridge driver also has some helper functions it can use: -struct v4l2_subdev *sd = v4l2_i2c_new_subdev(adapter, "module_foo", "chipid", 0x36); +struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter, + "module_foo", "chipid", 0x36); This loads the given module (can be NULL if no module needs to be loaded) and calls i2c_new_device() with the given i2c_adapter and chip/address arguments. -If all goes well, then it registers the subdev with the v4l2_device. It gets -the v4l2_device by calling i2c_get_adapdata(adapter), so you should make sure -to call i2c_set_adapdata(adapter, v4l2_device) when you setup the i2c_adapter -in your driver. +If all goes well, then it registers the subdev with the v4l2_device. You can also use v4l2_i2c_new_probed_subdev() which is very similar to v4l2_i2c_new_subdev(), except that it has an array of possible I2C addresses diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX index 2131b00b63f6..2f77ced35df7 100644 --- a/Documentation/vm/00-INDEX +++ b/Documentation/vm/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - this file. +active_mm.txt + - An explanation from Linus about tsk->active_mm vs tsk->mm. balance - various information on memory balancing. hugetlbpage.txt diff --git a/Documentation/vm/active_mm.txt b/Documentation/vm/active_mm.txt new file mode 100644 index 000000000000..4ee1f643d897 --- /dev/null +++ b/Documentation/vm/active_mm.txt @@ -0,0 +1,83 @@ +List: linux-kernel +Subject: Re: active_mm +From: Linus Torvalds <torvalds () transmeta ! com> +Date: 1999-07-30 21:36:24 + +Cc'd to linux-kernel, because I don't write explanations all that often, +and when I do I feel better about more people reading them. + +On Fri, 30 Jul 1999, David Mosberger wrote: +> +> Is there a brief description someplace on how "mm" vs. "active_mm" in +> the task_struct are supposed to be used? (My apologies if this was +> discussed on the mailing lists---I just returned from vacation and +> wasn't able to follow linux-kernel for a while). + +Basically, the new setup is: + + - we have "real address spaces" and "anonymous address spaces". The + difference is that an anonymous address space doesn't care about the + user-level page tables at all, so when we do a context switch into an + anonymous address space we just leave the previous address space + active. + + The obvious use for a "anonymous address space" is any thread that + doesn't need any user mappings - all kernel threads basically fall into + this category, but even "real" threads can temporarily say that for + some amount of time they are not going to be interested in user space, + and that the scheduler might as well try to avoid wasting time on + switching the VM state around. Currently only the old-style bdflush + sync does that. + + - "tsk->mm" points to the "real address space". For an anonymous process, + tsk->mm will be NULL, for the logical reason that an anonymous process + really doesn't _have_ a real address space at all. + + - however, we obviously need to keep track of which address space we + "stole" for such an anonymous user. For that, we have "tsk->active_mm", + which shows what the currently active address space is. + + The rule is that for a process with a real address space (ie tsk->mm is + non-NULL) the active_mm obviously always has to be the same as the real + one. + + For a anonymous process, tsk->mm == NULL, and tsk->active_mm is the + "borrowed" mm while the anonymous process is running. When the + anonymous process gets scheduled away, the borrowed address space is + returned and cleared. + +To support all that, the "struct mm_struct" now has two counters: a +"mm_users" counter that is how many "real address space users" there are, +and a "mm_count" counter that is the number of "lazy" users (ie anonymous +users) plus one if there are any real users. + +Usually there is at least one real user, but it could be that the real +user exited on another CPU while a lazy user was still active, so you do +actually get cases where you have a address space that is _only_ used by +lazy users. That is often a short-lived state, because once that thread +gets scheduled away in favour of a real thread, the "zombie" mm gets +released because "mm_users" becomes zero. + +Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any +more. "init_mm" should be considered just a "lazy context when no other +context is available", and in fact it is mainly used just at bootup when +no real VM has yet been created. So code that used to check + + if (current->mm == &init_mm) + +should generally just do + + if (!current->mm) + +instead (which makes more sense anyway - the test is basically one of "do +we have a user context", and is generally done by the page fault handler +and things like that). + +Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago, +because it slightly changes the interfaces to accomodate the alpha (who +would have thought it, but the alpha actually ends up having one of the +ugliest context switch codes - unlike the other architectures where the MM +and register state is separate, the alpha PALcode joins the two, and you +need to switch both together). + +(From http://marc.info/?l=linux-kernel&m=93337278602211&w=2) diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index 0706a7282a8c..2d70d0d95108 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -1,588 +1,691 @@ - -This document describes the Linux memory management "Unevictable LRU" -infrastructure and the use of this infrastructure to manage several types -of "unevictable" pages. The document attempts to provide the overall -rationale behind this mechanism and the rationale for some of the design -decisions that drove the implementation. The latter design rationale is -discussed in the context of an implementation description. Admittedly, one -can obtain the implementation details--the "what does it do?"--by reading the -code. One hopes that the descriptions below add value by provide the answer -to "why does it do that?". - -Unevictable LRU Infrastructure: - -The Unevictable LRU adds an additional LRU list to track unevictable pages -and to hide these pages from vmscan. This mechanism is based on a patch by -Larry Woodman of Red Hat to address several scalability problems with page + ============================== + UNEVICTABLE LRU INFRASTRUCTURE + ============================== + +======== +CONTENTS +======== + + (*) The Unevictable LRU + + - The unevictable page list. + - Memory control group interaction. + - Marking address spaces unevictable. + - Detecting Unevictable Pages. + - vmscan's handling of unevictable pages. + + (*) mlock()'d pages. + + - History. + - Basic management. + - mlock()/mlockall() system call handling. + - Filtering special vmas. + - munlock()/munlockall() system call handling. + - Migrating mlocked pages. + - mmap(MAP_LOCKED) system call handling. + - munmap()/exit()/exec() system call handling. + - try_to_unmap(). + - try_to_munlock() reverse map scan. + - Page reclaim in shrink_*_list(). + + +============ +INTRODUCTION +============ + +This document describes the Linux memory manager's "Unevictable LRU" +infrastructure and the use of this to manage several types of "unevictable" +pages. + +The document attempts to provide the overall rationale behind this mechanism +and the rationale for some of the design decisions that drove the +implementation. The latter design rationale is discussed in the context of an +implementation description. Admittedly, one can obtain the implementation +details - the "what does it do?" - by reading the code. One hopes that the +descriptions below add value by provide the answer to "why does it do that?". + + +=================== +THE UNEVICTABLE LRU +=================== + +The Unevictable LRU facility adds an additional LRU list to track unevictable +pages and to hide these pages from vmscan. This mechanism is based on a patch +by Larry Woodman of Red Hat to address several scalability problems with page reclaim in Linux. The problems have been observed at customer sites on large -memory x86_64 systems. For example, a non-numal x86_64 platform with 128GB -of main memory will have over 32 million 4k pages in a single zone. When a -large fraction of these pages are not evictable for any reason [see below], -vmscan will spend a lot of time scanning the LRU lists looking for the small -fraction of pages that are evictable. This can result in a situation where -all cpus are spending 100% of their time in vmscan for hours or days on end, -with the system completely unresponsive. - -The Unevictable LRU infrastructure addresses the following classes of -unevictable pages: - -+ page owned by ramfs -+ page mapped into SHM_LOCKed shared memory regions -+ page mapped into VM_LOCKED [mlock()ed] vmas - -The infrastructure might be able to handle other conditions that make pages +memory x86_64 systems. + +To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of +main memory will have over 32 million 4k pages in a single zone. When a large +fraction of these pages are not evictable for any reason [see below], vmscan +will spend a lot of time scanning the LRU lists looking for the small fraction +of pages that are evictable. This can result in a situation where all CPUs are +spending 100% of their time in vmscan for hours or days on end, with the system +completely unresponsive. + +The unevictable list addresses the following classes of unevictable pages: + + (*) Those owned by ramfs. + + (*) Those mapped into SHM_LOCK'd shared memory regions. + + (*) Those mapped into VM_LOCKED [mlock()ed] VMAs. + +The infrastructure may also be able to handle other conditions that make pages unevictable, either by definition or by circumstance, in the future. -The Unevictable LRU List +THE UNEVICTABLE PAGE LIST +------------------------- The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list called the "unevictable" list and an associated page flag, PG_unevictable, to -indicate that the page is being managed on the unevictable list. The -PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active -flag in that it indicates on which LRU list a page resides when PG_lru is set. -The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU -Kconfig option. +indicate that the page is being managed on the unevictable list. + +The PG_unevictable flag is analogous to, and mutually exclusive with, the +PG_active flag in that it indicates on which LRU list a page resides when +PG_lru is set. The unevictable list is compile-time configurable based on the +UNEVICTABLE_LRU Kconfig option. The Unevictable LRU infrastructure maintains unevictable pages on an additional LRU list for a few reasons: -1) We get to "treat unevictable pages just like we treat other pages in the - system, which means we get to use the same code to manipulate them, the - same code to isolate them (for migrate, etc.), the same code to keep track - of the statistics, etc..." [Rik van Riel] + (1) We get to "treat unevictable pages just like we treat other pages in the + system - which means we get to use the same code to manipulate them, the + same code to isolate them (for migrate, etc.), the same code to keep track + of the statistics, etc..." [Rik van Riel] + + (2) We want to be able to migrate unevictable pages between nodes for memory + defragmentation, workload management and memory hotplug. The linux kernel + can only migrate pages that it can successfully isolate from the LRU + lists. If we were to maintain pages elsewhere than on an LRU-like list, + where they can be found by isolate_lru_page(), we would prevent their + migration, unless we reworked migration code to find the unevictable pages + itself. -2) We want to be able to migrate unevictable pages between nodes--for memory - defragmentation, workload management and memory hotplug. The linux kernel - can only migrate pages that it can successfully isolate from the lru lists. - If we were to maintain pages elsewise than on an lru-like list, where they - can be found by isolate_lru_page(), we would prevent their migration, unless - we reworked migration code to find the unevictable pages. +The unevictable list does not differentiate between file-backed and anonymous, +swap-backed pages. This differentiation is only important while the pages are, +in fact, evictable. -The unevictable LRU list does not differentiate between file backed and swap -backed [anon] pages. This differentiation is only important while the pages -are, in fact, evictable. +The unevictable list benefits from the "arrayification" of the per-zone LRU +lists and statistics originally proposed and posted by Christoph Lameter. -The unevictable LRU list benefits from the "arrayification" of the per-zone -LRU lists and statistics originally proposed and posted by Christoph Lameter. +The unevictable list does not use the LRU pagevec mechanism. Rather, +unevictable pages are placed directly on the page's zone's unevictable list +under the zone lru_lock. This allows us to prevent the stranding of pages on +the unevictable list when one task has the page isolated from the LRU and other +tasks are changing the "evictability" state of the page. -The unevictable list does not use the lru pagevec mechanism. Rather, -unevictable pages are placed directly on the page's zone's unevictable -list under the zone lru_lock. The reason for this is to prevent stranding -of pages on the unevictable list when one task has the page isolated from the -lru and other tasks are changing the "evictability" state of the page. +MEMORY CONTROL GROUP INTERACTION +-------------------------------- -Unevictable LRU and Memory Controller Interaction +The unevictable LRU facility interacts with the memory control group [aka +memory controller; see Documentation/cgroups/memory.txt] by extending the +lru_list enum. + +The memory controller data structure automatically gets a per-zone unevictable +list as a result of the "arrayification" of the per-zone LRU lists (one per +lru_list enum element). The memory controller tracks the movement of pages to +and from the unevictable list. -The memory controller data structure automatically gets a per zone unevictable -lru list as a result of the "arrayification" of the per-zone LRU lists. The -memory controller tracks the movement of pages to and from the unevictable list. When a memory control group comes under memory pressure, the controller will not attempt to reclaim pages on the unevictable list. This has a couple of -effects. Because the pages are "hidden" from reclaim on the unevictable list, -the reclaim process can be more efficient, dealing only with pages that have -a chance of being reclaimed. On the other hand, if too many of the pages -charged to the control group are unevictable, the evictable portion of the -working set of the tasks in the control group may not fit into the available -memory. This can cause the control group to thrash or to oom-kill tasks. - - -Unevictable LRU: Detecting Unevictable Pages - -The function page_evictable(page, vma) in vmscan.c determines whether a -page is evictable or not. For ramfs pages and pages in SHM_LOCKed regions, -page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's -address space using a wrapper function. Wrapper functions are used to set, -clear and test the flag to reduce the requirement for #ifdef's throughout the -source code. AS_UNEVICTABLE is set on ramfs inode/mapping when it is created. -This flag remains for the life of the inode. - -For shared memory regions, AS_UNEVICTABLE is set when an application -successfully SHM_LOCKs the region and is removed when the region is -SHM_UNLOCKed. Note that shmctl(SHM_LOCK, ...) does not populate the page -tables for the region as does, for example, mlock(). So, we make no special -effort to push any pages in the SHM_LOCKed region to the unevictable list. -Vmscan will do this when/if it encounters the pages during reclaim. On -SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the -unevictable list if no other condition keeps them unevictable. If a SHM_LOCKed -region is destroyed, the pages are also "rescued" from the unevictable list in -the process of freeing them. - -page_evictable() detects mlock()ed pages by testing an additional page flag, -PG_mlocked via the PageMlocked() wrapper. If the page is NOT mlocked, and a -non-NULL vma is supplied, page_evictable() will check whether the vma is +effects: + + (1) Because the pages are "hidden" from reclaim on the unevictable list, the + reclaim process can be more efficient, dealing only with pages that have a + chance of being reclaimed. + + (2) On the other hand, if too many of the pages charged to the control group + are unevictable, the evictable portion of the working set of the tasks in + the control group may not fit into the available memory. This can cause + the control group to thrash or to OOM-kill tasks. + + +MARKING ADDRESS SPACES UNEVICTABLE +---------------------------------- + +For facilities such as ramfs none of the pages attached to the address space +may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE +address space flag is provided, and this can be manipulated by a filesystem +using a number of wrapper functions: + + (*) void mapping_set_unevictable(struct address_space *mapping); + + Mark the address space as being completely unevictable. + + (*) void mapping_clear_unevictable(struct address_space *mapping); + + Mark the address space as being evictable. + + (*) int mapping_unevictable(struct address_space *mapping); + + Query the address space, and return true if it is completely + unevictable. + +These are currently used in two places in the kernel: + + (1) By ramfs to mark the address spaces of its inodes when they are created, + and this mark remains for the life of the inode. + + (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called. + + Note that SHM_LOCK is not required to page in the locked pages if they're + swapped out; the application must touch the pages manually if it wants to + ensure they're in memory. + + +DETECTING UNEVICTABLE PAGES +--------------------------- + +The function page_evictable() in vmscan.c determines whether a page is +evictable or not using the query function outlined above [see section "Marking +address spaces unevictable"] to check the AS_UNEVICTABLE flag. + +For address spaces that are so marked after being populated (as SHM regions +might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate +the page tables for the region as does, for example, mlock(), nor need it make +any special effort to push any pages in the SHM_LOCK'd area to the unevictable +list. Instead, vmscan will do this if and when it encounters the pages during +a reclamation scan. + +On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan +the pages in the region and "rescue" them from the unevictable list if no other +condition is keeping them unevictable. If an unevictable region is destroyed, +the pages are also "rescued" from the unevictable list in the process of +freeing them. + +page_evictable() also checks for mlocked pages by testing an additional page +flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked, +and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and update the appropriate statistics if the vma is VM_LOCKED. This method allows efficient "culling" of pages in the fault path that are being faulted in to -VM_LOCKED vmas. +VM_LOCKED VMAs. -Unevictable Pages and Vmscan [shrink_*_list()] +VMSCAN'S HANDLING OF UNEVICTABLE PAGES +-------------------------------------- If unevictable pages are culled in the fault path, or moved to the unevictable -list at mlock() or mmap() time, vmscan will never encounter the pages until -they have become evictable again, for example, via munlock() and have been -"rescued" from the unevictable list. However, there may be situations where we -decide, for the sake of expediency, to leave a unevictable page on one of the -regular active/inactive LRU lists for vmscan to deal with. Vmscan checks for -such pages in all of the shrink_{active|inactive|page}_list() functions and -will "cull" such pages that it encounters--that is, it diverts those pages to -the unevictable list for the zone being scanned. - -There may be situations where a page is mapped into a VM_LOCKED vma, but the -page is not marked as PageMlocked. Such pages will make it all the way to +list at mlock() or mmap() time, vmscan will not encounter the pages until they +have become evictable again (via munlock() for example) and have been "rescued" +from the unevictable list. However, there may be situations where we decide, +for the sake of expediency, to leave a unevictable page on one of the regular +active/inactive LRU lists for vmscan to deal with. vmscan checks for such +pages in all of the shrink_{active|inactive|page}_list() functions and will +"cull" such pages that it encounters: that is, it diverts those pages to the +unevictable list for the zone being scanned. + +There may be situations where a page is mapped into a VM_LOCKED VMA, but the +page is not marked as PG_mlocked. Such pages will make it all the way to shrink_page_list() where they will be detected when vmscan walks the reverse -map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list() -will cull the page at that point. +map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, +shrink_page_list() will cull the page at that point. -To "cull" an unevictable page, vmscan simply puts the page back on the lru -list using putback_lru_page()--the inverse operation to isolate_lru_page()-- -after dropping the page lock. Because the condition which makes the page -unevictable may change once the page is unlocked, putback_lru_page() will -recheck the unevictable state of a page that it places on the unevictable lru -list. If the page has become unevictable, putback_lru_page() removes it from -the list and retries, including the page_unevictable() test. Because such a -race is a rare event and movement of pages onto the unevictable list should be -rare, these extra evictabilty checks should not occur in the majority of calls -to putback_lru_page(). +To "cull" an unevictable page, vmscan simply puts the page back on the LRU list +using putback_lru_page() - the inverse operation to isolate_lru_page() - after +dropping the page lock. Because the condition which makes the page unevictable +may change once the page is unlocked, putback_lru_page() will recheck the +unevictable state of a page that it places on the unevictable list. If the +page has become unevictable, putback_lru_page() removes it from the list and +retries, including the page_unevictable() test. Because such a race is a rare +event and movement of pages onto the unevictable list should be rare, these +extra evictabilty checks should not occur in the majority of calls to +putback_lru_page(). -Mlocked Page: Prior Work +============= +MLOCKED PAGES +============= -The "Unevictable Mlocked Pages" infrastructure is based on work originally +The unevictable page list is also useful for mlock(), in addition to ramfs and +SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in +NOMMU situations, all mappings are effectively mlocked. + + +HISTORY +------- + +The "Unevictable mlocked Pages" infrastructure is based on work originally posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU". -Nick posted his patch as an alternative to a patch posted by Christoph -Lameter to achieve the same objective--hiding mlocked pages from vmscan. -In Nick's patch, he used one of the struct page lru list link fields as a count -of VM_LOCKED vmas that map the page. This use of the link field for a count -prevented the management of the pages on an LRU list. Thus, mlocked pages were -not migratable as isolate_lru_page() could not find them and the lru list link -field was not available to the migration subsystem. Nick resolved this by -putting mlocked pages back on the lru list before attempting to isolate them, -thus abandoning the count of VM_LOCKED vmas. When Nick's patch was integrated -with the Unevictable LRU work, the count was replaced by walking the reverse -map to determine whether any VM_LOCKED vmas mapped the page. More on this -below. - - -Mlocked Pages: Basic Management - -Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of -unevictable pages. When such a page has been "noticed" by the memory -management subsystem, the page is marked with the PG_mlocked [PageMlocked()] -flag. A PageMlocked() page will be placed on the unevictable LRU list when -it is added to the LRU. Pages can be "noticed" by memory management in -several places: - -1) in the mlock()/mlockall() system call handlers. -2) in the mmap() system call handler when mmap()ing a region with the - MAP_LOCKED flag, or mmap()ing a region in a task that has called - mlockall() with the MCL_FUTURE flag. Both of these conditions result - in the VM_LOCKED flag being set for the vma. -3) in the fault path, if mlocked pages are "culled" in the fault path, - and when a VM_LOCKED stack segment is expanded. -4) as mentioned above, in vmscan:shrink_page_list() when attempting to - reclaim a page in a VM_LOCKED vma via try_to_unmap(). - -Mlocked pages become unlocked and rescued from the unevictable list when: - -1) mapped in a range unlocked via the munlock()/munlockall() system calls. -2) munmapped() out of the last VM_LOCKED vma that maps the page, including - unmapping at task exit. -3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file. -4) before a page is COWed in a VM_LOCKED vma. - - -Mlocked Pages: mlock()/mlockall() System Call Handling +Nick posted his patch as an alternative to a patch posted by Christoph Lameter +to achieve the same objective: hiding mlocked pages from vmscan. + +In Nick's patch, he used one of the struct page LRU list link fields as a count +of VM_LOCKED VMAs that map the page. This use of the link field for a count +prevented the management of the pages on an LRU list, and thus mlocked pages +were not migratable as isolate_lru_page() could not find them, and the LRU list +link field was not available to the migration subsystem. + +Nick resolved this by putting mlocked pages back on the lru list before +attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When +Nick's patch was integrated with the Unevictable LRU work, the count was +replaced by walking the reverse map to determine whether any VM_LOCKED VMAs +mapped the page. More on this below. + + +BASIC MANAGEMENT +---------------- + +mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable +pages. When such a page has been "noticed" by the memory management subsystem, +the page is marked with the PG_mlocked flag. This can be manipulated using the +PageMlocked() functions. + +A PG_mlocked page will be placed on the unevictable list when it is added to +the LRU. Such pages can be "noticed" by memory management in several places: + + (1) in the mlock()/mlockall() system call handlers; + + (2) in the mmap() system call handler when mmapping a region with the + MAP_LOCKED flag; + + (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE + flag + + (4) in the fault path, if mlocked pages are "culled" in the fault path, + and when a VM_LOCKED stack segment is expanded; or + + (5) as mentioned above, in vmscan:shrink_page_list() when attempting to + reclaim a page in a VM_LOCKED VMA via try_to_unmap() + +all of which result in the VM_LOCKED flag being set for the VMA if it doesn't +already have it set. + +mlocked pages become unlocked and rescued from the unevictable list when: + + (1) mapped in a range unlocked via the munlock()/munlockall() system calls; + + (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including + unmapping at task exit; + + (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file; + or + + (4) before a page is COW'd in a VM_LOCKED VMA. + + +mlock()/mlockall() SYSTEM CALL HANDLING +--------------------------------------- Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup() -for each vma in the range specified by the call. In the case of mlockall(), +for each VMA in the range specified by the call. In the case of mlockall(), this is the entire active address space of the task. Note that mlock_fixup() -is used for both mlock()ing and munlock()ing a range of memory. A call to -mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED -is treated as a no-op--mlock_fixup() simply returns. - -If the vma passes some filtering described in "Mlocked Pages: Filtering Vmas" -below, mlock_fixup() will attempt to merge the vma with its neighbors or split -off a subset of the vma if the range does not cover the entire vma. Once the -vma has been merged or split or neither, mlock_fixup() will call -__mlock_vma_pages_range() to fault in the pages via get_user_pages() and -to mark the pages as mlocked via mlock_vma_page(). - -Note that the vma being mlocked might be mapped with PROT_NONE. In this case, -get_user_pages() will be unable to fault in the pages. That's OK. If pages -do end up getting faulted into this VM_LOCKED vma, we'll handle them in the +is used for both mlocking and munlocking a range of memory. A call to mlock() +an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is +treated as a no-op, and mlock_fixup() simply returns. + +If the VMA passes some filtering as described in "Filtering Special Vmas" +below, mlock_fixup() will attempt to merge the VMA with its neighbors or split +off a subset of the VMA if the range does not cover the entire VMA. Once the +VMA has been merged or split or neither, mlock_fixup() will call +__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to +mark the pages as mlocked via mlock_vma_page(). + +Note that the VMA being mlocked might be mapped with PROT_NONE. In this case, +get_user_pages() will be unable to fault in the pages. That's okay. If pages +do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the fault path or in vmscan. Also note that a page returned by get_user_pages() could be truncated or -migrated out from under us, while we're trying to mlock it. To detect -this, __mlock_vma_pages_range() tests the page_mapping after acquiring -the page lock. If the page is still associated with its mapping, we'll -go ahead and call mlock_vma_page(). If the mapping is gone, we just -unlock the page and move on. Worse case, this results in page mapped -in a VM_LOCKED vma remaining on a normal LRU list without being -PageMlocked(). Again, vmscan will detect and cull such pages. - -mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will -TestSetPageMlocked() for each page returned by get_user_pages(). We use -TestSetPageMlocked() because the page might already be mlocked by another -task/vma and we don't want to do extra work. We especially do not want to -count an mlocked page more than once in the statistics. If the page was -already mlocked, mlock_vma_page() is done. +migrated out from under us, while we're trying to mlock it. To detect this, +__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock. +If the page is still associated with its mapping, we'll go ahead and call +mlock_vma_page(). If the mapping is gone, we just unlock the page and move on. +In the worst case, this will result in a page mapped in a VM_LOCKED VMA +remaining on a normal LRU list without being PageMlocked(). Again, vmscan will +detect and cull such pages. + +mlock_vma_page() will call TestSetPageMlocked() for each page returned by +get_user_pages(). We use TestSetPageMlocked() because the page might already +be mlocked by another task/VMA and we don't want to do extra work. We +especially do not want to count an mlocked page more than once in the +statistics. If the page was already mlocked, mlock_vma_page() need do nothing +more. If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the page from the LRU, as it is likely on the appropriate active or inactive list -at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will -putback the page--putback_lru_page()--which will notice that the page is now -mlocked and divert the page to the zone's unevictable LRU list. If +at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put +back the page - by calling putback_lru_page() - which will notice that the page +is now mlocked and divert the page to the zone's unevictable list. If mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle -it later if/when it attempts to reclaim the page. +it later if and when it attempts to reclaim the page. -Mlocked Pages: Filtering Special Vmas +FILTERING SPECIAL VMAS +---------------------- -mlock_fixup() filters several classes of "special" vmas: +mlock_fixup() filters several classes of "special" VMAs: -1) vmas with VM_IO|VM_PFNMAP set are skipped entirely. The pages behind +1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind these mappings are inherently pinned, so we don't need to mark them as - mlocked. In any case, most of the pages have no struct page in which to - so mark the page. Because of this, get_user_pages() will fail for these - vmas, so there is no sense in attempting to visit them. - -2) vmas mapping hugetlbfs page are already effectively pinned into memory. - We don't need nor want to mlock() these pages. However, to preserve the - prior behavior of mlock()--before the unevictable/mlock changes-- - mlock_fixup() will call make_pages_present() in the hugetlbfs vma range - to allocate the huge pages and populate the ptes. - -3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of - kernel pages, such as the vdso page, relay channel pages, etc. These pages + mlocked. In any case, most of the pages have no struct page in which to so + mark the page. Because of this, get_user_pages() will fail for these VMAs, + so there is no sense in attempting to visit them. + +2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We + neither need nor want to mlock() these pages. However, to preserve the + prior behavior of mlock() - before the unevictable/mlock changes - + mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to + allocate the huge pages and populate the ptes. + +3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of + kernel pages, such as the VDSO page, relay channel pages, etc. These pages are inherently unevictable and are not managed on the LRU lists. - mlock_fixup() treats these vmas the same as hugetlbfs vmas. It calls + mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls make_pages_present() to populate the ptes. -Note that for all of these special vmas, mlock_fixup() does not set the +Note that for all of these special VMAs, mlock_fixup() does not set the VM_LOCKED flag. Therefore, we won't have to deal with them later during -munlock() or munmap()--for example, at task exit. Neither does mlock_fixup() -account these vmas against the task's "locked_vm". - -Mlocked Pages: Downgrading the Mmap Semaphore. - -mlock_fixup() must be called with the mmap semaphore held for write, because -it may have to merge or split vmas. However, mlocking a large region of -memory can take a long time--especially if vmscan must reclaim pages to -satisfy the regions requirements. Faulting in a large region with the mmap -semaphore held for write can hold off other faults on the address space, in -the case of a multi-threaded task. It can also hold off scans of the task's -address space via /proc. While testing under heavy load, it was observed that -the ps(1) command could be held off for many minutes while a large segment was -mlock()ed down. - -To address this issue, and to make the system more responsive during mlock()ing -of large segments, mlock_fixup() downgrades the mmap semaphore to read mode -during the call to __mlock_vma_pages_range(). This works fine. However, the -callers of mlock_fixup() expect the semaphore to be returned in write mode. -So, mlock_fixup() "upgrades" the semphore to write mode. Linux does not -support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore -and reacquire it in write mode. In a multi-threaded task, it is possible for -the task memory map to change while the semaphore is dropped. Therefore, -mlock_fixup() looks up the vma at the range start address after reacquiring -the semaphore in write mode and verifies that it still covers the original -range. If not, mlock_fixup() returns an error [-EAGAIN]. All callers of -mlock_fixup() have been changed to deal with this new error condition. - -Note: when munlocking a region, all of the pages should already be resident-- -unless we have racing threads mlocking() and munlocking() regions. So, -unlocking should not have to wait for page allocations nor faults of any kind. -Therefore mlock_fixup() does not downgrade the semaphore for munlock(). - - -Mlocked Pages: munlock()/munlockall() System Call Handling - -The munlock() and munlockall() system calls are handled by the same functions-- -do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock -vs lock operation indicated by an argument. So, these system calls are also -handled by mlock_fixup(). Again, if called for an already munlock()ed vma, -mlock_fixup() simply returns. Because of the vma filtering discussed above, -VM_LOCKED will not be set in any "special" vmas. So, these vmas will be +munlock(), munmap() or task exit. Neither does mlock_fixup() account these +VMAs against the task's "locked_vm". + + +munlock()/munlockall() SYSTEM CALL HANDLING +------------------------------------------- + +The munlock() and munlockall() system calls are handled by the same functions - +do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs +lock operation indicated by an argument. So, these system calls are also +handled by mlock_fixup(). Again, if called for an already munlocked VMA, +mlock_fixup() simply returns. Because of the VMA filtering discussed above, +VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be ignored for munlock. -If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off -the specified range. The range is then munlocked via the function -__mlock_vma_pages_range()--the same function used to mlock a vma range-- +If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the +specified range. The range is then munlocked via the function +__mlock_vma_pages_range() - the same function used to mlock a VMA range - passing a flag to indicate that munlock() is being performed. -Because the vma access protections could have been changed to PROT_NONE after +Because the VMA access protections could have been changed to PROT_NONE after faulting in and mlocking pages, get_user_pages() was unreliable for visiting -these pages for munlocking. Because we don't want to leave pages mlocked(), +these pages for munlocking. Because we don't want to leave pages mlocked, get_user_pages() was enhanced to accept a flag to ignore the permissions when -fetching the pages--all of which should be resident as a result of previous -mlock()ing. +fetching the pages - all of which should be resident as a result of previous +mlocking. For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked -flag using TestClearPageMlocked(). As with mlock_vma_page(), munlock_vma_page() -use the Test*PageMlocked() function to handle the case where the page might -have already been unlocked by another task. If the page was mlocked, -munlock_vma_page() updates that zone statistics for the number of mlocked -pages. Note, however, that at this point we haven't checked whether the page -is mapped by other VM_LOCKED vmas. - -We can't call try_to_munlock(), the function that walks the reverse map to check -for other VM_LOCKED vmas, without first isolating the page from the LRU. +flag using TestClearPageMlocked(). As with mlock_vma_page(), +munlock_vma_page() use the Test*PageMlocked() function to handle the case where +the page might have already been unlocked by another task. If the page was +mlocked, munlock_vma_page() updates that zone statistics for the number of +mlocked pages. Note, however, that at this point we haven't checked whether +the page is mapped by other VM_LOCKED VMAs. + +We can't call try_to_munlock(), the function that walks the reverse map to +check for other VM_LOCKED VMAs, without first isolating the page from the LRU. try_to_munlock() is a variant of try_to_unmap() and thus requires that the page -not be on an lru list. [More on these below.] However, the call to -isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). -So, we go ahead and clear PG_mlocked up front, as this might be the only chance -we have. If we can successfully isolate the page, we go ahead and +not be on an LRU list [more on these below]. However, the call to +isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So, +we go ahead and clear PG_mlocked up front, as this might be the only chance we +have. If we can successfully isolate the page, we go ahead and try_to_munlock(), which will restore the PG_mlocked flag and update the zone -page statistics if it finds another vma holding the page mlocked. If we fail +page statistics if it finds another VMA holding the page mlocked. If we fail to isolate the page, we'll have left a potentially mlocked page on the LRU. -This is fine, because we'll catch it later when/if vmscan tries to reclaim the -page. This should be relatively rare. - -Mlocked Pages: Migrating Them... - -A page that is being migrated has been isolated from the lru lists and is -held locked across unmapping of the page, updating the page's mapping -[address_space] entry and copying the contents and state, until the -page table entry has been replaced with an entry that refers to the new -page. Linux supports migration of mlocked pages and other unevictable -pages. This involves simply moving the PageMlocked and PageUnevictable states -from the old page to the new page. - -Note that page migration can race with mlocking or munlocking of the same -page. This has been discussed from the mlock/munlock perspective in the -respective sections above. Both processes [migration, m[un]locking], hold -the page locked. This provides the first level of synchronization. Page -migration zeros out the page_mapping of the old page before unlocking it, -so m[un]lock can skip these pages by testing the page mapping under page -lock. - -When completing page migration, we place the new and old pages back onto the -lru after dropping the page lock. The "unneeded" page--old page on success, -new page on failure--will be freed when the reference count held by the -migration process is released. To ensure that we don't strand pages on the -unevictable list because of a race between munlock and migration, page -migration uses the putback_lru_page() function to add migrated pages back to -the lru. - - -Mlocked Pages: mmap(MAP_LOCKED) System Call Handling +This is fine, because we'll catch it later if and if vmscan tries to reclaim +the page. This should be relatively rare. + + +MIGRATING MLOCKED PAGES +----------------------- + +A page that is being migrated has been isolated from the LRU lists and is held +locked across unmapping of the page, updating the page's address space entry +and copying the contents and state, until the page table entry has been +replaced with an entry that refers to the new page. Linux supports migration +of mlocked pages and other unevictable pages. This involves simply moving the +PG_mlocked and PG_unevictable states from the old page to the new page. + +Note that page migration can race with mlocking or munlocking of the same page. +This has been discussed from the mlock/munlock perspective in the respective +sections above. Both processes (migration and m[un]locking) hold the page +locked. This provides the first level of synchronization. Page migration +zeros out the page_mapping of the old page before unlocking it, so m[un]lock +can skip these pages by testing the page mapping under page lock. + +To complete page migration, we place the new and old pages back onto the LRU +after dropping the page lock. The "unneeded" page - old page on success, new +page on failure - will be freed when the reference count held by the migration +process is released. To ensure that we don't strand pages on the unevictable +list because of a race between munlock and migration, page migration uses the +putback_lru_page() function to add migrated pages back to the LRU. + + +mmap(MAP_LOCKED) SYSTEM CALL HANDLING +------------------------------------- In addition the the mlock()/mlockall() system calls, an application can request -that a region of memory be mlocked using the MAP_LOCKED flag with the mmap() +that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap() call. Furthermore, any mmap() call or brk() call that expands the heap by a task that has previously called mlockall() with the MCL_FUTURE flag will result -in the newly mapped memory being mlocked. Before the unevictable/mlock changes, -the kernel simply called make_pages_present() to allocate pages and populate -the page table. +in the newly mapped memory being mlocked. Before the unevictable/mlock +changes, the kernel simply called make_pages_present() to allocate pages and +populate the page table. To mlock a range of memory under the unevictable/mlock infrastructure, the mmap() handler and task address space expansion functions call mlock_vma_pages_range() specifying the vma and the address range to mlock. -mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in -"Mlocked Pages: Filtering Vmas". It will clear the VM_LOCKED flag, which will -have already been set by the caller, in filtered vmas. Thus these vma's need -not be visited for munlock when the region is unmapped. +mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in +"Filtering Special VMAs". It will clear the VM_LOCKED flag, which will have +already been set by the caller, in filtered VMAs. Thus these VMA's need not be +visited for munlock when the region is unmapped. -For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to +For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to fault/allocate the pages and mlock them. Again, like mlock_fixup(), mlock_vma_pages_range() downgrades the mmap semaphore to read mode before -attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore +attempting to fault/allocate and mlock the pages and "upgrades" the semaphore back to write mode before returning. -The callers of mlock_vma_pages_range() will have already added the memory -range to be mlocked to the task's "locked_vm". To account for filtered vmas, +The callers of mlock_vma_pages_range() will have already added the memory range +to be mlocked to the task's "locked_vm". To account for filtered VMAs, mlock_vma_pages_range() returns the number of pages NOT mlocked. All of the -callers then subtract a non-negative return value from the task's locked_vm. -A negative return value represent an error--for example, from get_user_pages() -attempting to fault in a vma with PROT_NONE access. In this case, we leave -the memory range accounted as locked_vm, as the protections could be changed -later and pages allocated into that region. +callers then subtract a non-negative return value from the task's locked_vm. A +negative return value represent an error - for example, from get_user_pages() +attempting to fault in a VMA with PROT_NONE access. In this case, we leave the +memory range accounted as locked_vm, as the protections could be changed later +and pages allocated into that region. -Mlocked Pages: munmap()/exit()/exec() System Call Handling +munmap()/exit()/exec() SYSTEM CALL HANDLING +------------------------------------------- When unmapping an mlocked region of memory, whether by an explicit call to munmap() or via an internal unmap from exit() or exec() processing, we must -munlock the pages if we're removing the last VM_LOCKED vma that maps the pages. +munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages. Before the unevictable/mlock changes, mlocking did not mark the pages in any way, so unmapping them required no processing. To munlock a range of memory under the unevictable/mlock infrastructure, the -munmap() hander and task address space tear down function call +munmap() handler and task address space call tear down function munlock_vma_pages_all(). The name reflects the observation that one always -specifies the entire vma range when munlock()ing during unmap of a region. -Because of the vma filtering when mlocking() regions, only "normal" vmas that +specifies the entire VMA range when munlock()ing during unmap of a region. +Because of the VMA filtering when mlocking() regions, only "normal" VMAs that actually contain mlocked pages will be passed to munlock_vma_pages_all(). -munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup() +munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup() for the munlock case, calls __munlock_vma_pages_range() to walk the page table -for the vma's memory range and munlock_vma_page() each resident page mapped by -the vma. This effectively munlocks the page, only if this is the last -VM_LOCKED vma that maps the page. - +for the VMA's memory range and munlock_vma_page() each resident page mapped by +the VMA. This effectively munlocks the page, only if this is the last +VM_LOCKED VMA that maps the page. -Mlocked Page: try_to_unmap() -[Note: the code changes represented by this section are really quite small -compared to the text to describe what happening and why, and to discuss the -implications.] +try_to_unmap() +-------------- -Pages can, of course, be mapped into multiple vmas. Some of these vmas may +Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may have VM_LOCKED flag set. It is possible for a page mapped into one or more -VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one -of the active or inactive LRU lists. This could happen if, for example, a -task in the process of munlock()ing the page could not isolate the page from -the LRU. As a result, vmscan/shrink_page_list() might encounter such a page -as described in "Unevictable Pages and Vmscan [shrink_*_list()]". To -handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED -vmas while it is walking a page's reverse map. +VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one +of the active or inactive LRU lists. This could happen if, for example, a task +in the process of munlocking the page could not isolate the page from the LRU. +As a result, vmscan/shrink_page_list() might encounter such a page as described +in section "vmscan's handling of unevictable pages". To handle this situation, +try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse +map. try_to_unmap() is always called, by either vmscan for reclaim or for page -migration, with the argument page locked and isolated from the LRU. BUG_ON() -assertions enforce this requirement. Separate functions handle anonymous and -mapped file pages, as these types of pages have different reverse map -mechanisms. - - try_to_unmap_anon() - -To unmap anonymous pages, each vma in the list anchored in the anon_vma must be -visited--at least until a VM_LOCKED vma is encountered. If the page is being -unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked -pages are migratable. However, for reclaim, if the page is mapped into a -VM_LOCKED vma, the scan stops. try_to_unmap() attempts to acquire the mmap -semphore of the mm_struct to which the vma belongs in read mode. If this is -successful, try_to_unmap() will mlock the page via mlock_vma_page()--we -wouldn't have gotten to try_to_unmap() if the page were already mlocked--and -will return SWAP_MLOCK, indicating that the page is unevictable. If the -mmap semaphore cannot be acquired, we are not sure whether the page is really -unevictable or not. In this case, try_to_unmap() will return SWAP_AGAIN. - - try_to_unmap_file() -- linear mappings - -Unmapping of a mapped file page works the same, except that the scan visits -all vmas that maps the page's index/page offset in the page's mapping's -reverse map priority search tree. It must also visit each vma in the page's -mapping's non-linear list, if the list is non-empty. As for anonymous pages, -on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will -attempt to acquire the associated mm_struct's mmap semaphore to mlock the page, -returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not. - - try_to_unmap_file() -- non-linear mappings - -If a page's mapping contains a non-empty non-linear mapping vma list, then -try_to_un{map|lock}() must also visit each vma in that list to determine -whether the page is mapped in a VM_LOCKED vma. Again, the scan must visit -all vmas in the non-linear list to ensure that the pages is not/should not be -mlocked. If a VM_LOCKED vma is found in the list, the scan could terminate. -However, there is no easy way to determine whether the page is actually mapped -in a given vma--either for unmapping or testing whether the VM_LOCKED vma -actually pins the page. - -So, try_to_unmap_file() handles non-linear mappings by scanning a certain -number of pages--a "cluster"--in each non-linear vma associated with the page's -mapping, for each file mapped page that vmscan tries to unmap. If this happens -to unmap the page we're trying to unmap, try_to_unmap() will notice this on -return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS. Otherwise, it -will return SWAP_AGAIN, causing vmscan to recirculate this page. We take -advantage of the cluster scan in try_to_unmap_cluster() as follows: - -For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap -semaphore of the associated mm_struct for read without blocking. If this -attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will -retain the mmap semaphore for the scan; otherwise it drops it here. Then, -for each page in the cluster, if we're holding the mmap semaphore for a locked -vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page. This -call is a no-op if the page is already locked, but will mlock any pages in -the non-linear mapping that happen to be unlocked. If one of the pages so -mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will -return SWAP_MLOCK, rather than the default SWAP_AGAIN. This will allow vmscan -to cull the page, rather than recirculating it on the inactive list. Again, -if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns -SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but -couldn't be mlocked. - - -Mlocked pages: try_to_munlock() Reverse Map Scan - -TODO/FIXME: a better name might be page_mlocked()--analogous to the -page_referenced() reverse map walker. - -When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall() -System Call Handling" above--tries to munlock a page, it needs to -determine whether or not the page is mapped by any VM_LOCKED vma, without -actually attempting to unmap all ptes from the page. For this purpose, the -unevictable/mlock infrastructure introduced a variant of try_to_unmap() called -try_to_munlock(). +migration, with the argument page locked and isolated from the LRU. Separate +functions handle anonymous and mapped file pages, as these types of pages have +different reverse map mechanisms. + + (*) try_to_unmap_anon() + + To unmap anonymous pages, each VMA in the list anchored in the anon_vma + must be visited - at least until a VM_LOCKED VMA is encountered. If the + page is being unmapped for migration, VM_LOCKED VMAs do not stop the + process because mlocked pages are migratable. However, for reclaim, if + the page is mapped into a VM_LOCKED VMA, the scan stops. + + try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of + the mm_struct to which the VMA belongs. If this is successful, it will + mlock the page via mlock_vma_page() - we wouldn't have gotten to + try_to_unmap_anon() if the page were already mlocked - and will return + SWAP_MLOCK, indicating that the page is unevictable. + + If the mmap semaphore cannot be acquired, we are not sure whether the page + is really unevictable or not. In this case, try_to_unmap_anon() will + return SWAP_AGAIN. + + (*) try_to_unmap_file() - linear mappings + + Unmapping of a mapped file page works the same as for anonymous mappings, + except that the scan visits all VMAs that map the page's index/page offset + in the page's mapping's reverse map priority search tree. It also visits + each VMA in the page's mapping's non-linear list, if the list is + non-empty. + + As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file + page, try_to_unmap_file() will attempt to acquire the associated + mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this + is successful, and SWAP_AGAIN, if not. + + (*) try_to_unmap_file() - non-linear mappings + + If a page's mapping contains a non-empty non-linear mapping VMA list, then + try_to_un{map|lock}() must also visit each VMA in that list to determine + whether the page is mapped in a VM_LOCKED VMA. Again, the scan must visit + all VMAs in the non-linear list to ensure that the pages is not/should not + be mlocked. + + If a VM_LOCKED VMA is found in the list, the scan could terminate. + However, there is no easy way to determine whether the page is actually + mapped in a given VMA - either for unmapping or testing whether the + VM_LOCKED VMA actually pins the page. + + try_to_unmap_file() handles non-linear mappings by scanning a certain + number of pages - a "cluster" - in each non-linear VMA associated with the + page's mapping, for each file mapped page that vmscan tries to unmap. If + this happens to unmap the page we're trying to unmap, try_to_unmap() will + notice this on return (page_mapcount(page) will be 0) and return + SWAP_SUCCESS. Otherwise, it will return SWAP_AGAIN, causing vmscan to + recirculate this page. We take advantage of the cluster scan in + try_to_unmap_cluster() as follows: + + For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the + mmap semaphore of the associated mm_struct for read without blocking. + + If this attempt is successful and the VMA is VM_LOCKED, + try_to_unmap_cluster() will retain the mmap semaphore for the scan; + otherwise it drops it here. + + Then, for each page in the cluster, if we're holding the mmap semaphore + for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to + mlock the page. This call is a no-op if the page is already locked, + but will mlock any pages in the non-linear mapping that happen to be + unlocked. + + If one of the pages so mlocked is the page passed in to try_to_unmap(), + try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default + SWAP_AGAIN. This will allow vmscan to cull the page, rather than + recirculating it on the inactive list. + + Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it + returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED + VMA, but couldn't be mlocked. + + +try_to_munlock() REVERSE MAP SCAN +--------------------------------- + + [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the + page_referenced() reverse map walker. + +When munlock_vma_page() [see section "munlock()/munlockall() System Call +Handling" above] tries to munlock a page, it needs to determine whether or not +the page is mapped by any VM_LOCKED VMA without actually attempting to unmap +all PTEs from the page. For this purpose, the unevictable/mlock infrastructure +introduced a variant of try_to_unmap() called try_to_munlock(). try_to_munlock() calls the same functions as try_to_unmap() for anonymous and mapped file pages with an additional argument specifing unlock versus unmap processing. Again, these functions walk the respective reverse maps looking -for VM_LOCKED vmas. When such a vma is found for anonymous pages and file +for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file pages mapped in linear VMAs, as in the try_to_unmap() case, the functions attempt to acquire the associated mmap semphore, mlock the page via mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the pre-clearing of the page's PG_mlocked done by munlock_vma_page. -If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap -semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() -to recycle the page on the inactive list and hope that it has better luck -with the page next time. - -For file pages mapped into non-linear vmas, the try_to_munlock() logic works -slightly differently. On encountering a VM_LOCKED non-linear vma that might -map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking -the page. munlock_vma_page() will just leave the page unlocked and let -vmscan deal with it--the usual fallback position. - -Note that try_to_munlock()'s reverse map walk must visit every vma in a pages' -reverse map to determine that a page is NOT mapped into any VM_LOCKED vma. -However, the scan can terminate when it encounters a VM_LOCKED vma and can -successfully acquire the vma's mmap semphore for read and mlock the page. -Although try_to_munlock() can be called many [very many!] times when -munlock()ing a large region or tearing down a large address space that has been -mlocked via mlockall(), overall this is a fairly rare event. - -Mlocked Page: Page Reclaim in shrink_*_list() - -shrink_active_list() culls any obviously unevictable pages--i.e., -!page_evictable(page, NULL)--diverting these to the unevictable lru -list. However, shrink_active_list() only sees unevictable pages that -made it onto the active/inactive lru lists. Note that these pages do not -have PageUnevictable set--otherwise, they would be on the unevictable list and -shrink_active_list would never see them. +If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap +semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() to +recycle the page on the inactive list and hope that it has better luck with the +page next time. + +For file pages mapped into non-linear VMAs, the try_to_munlock() logic works +slightly differently. On encountering a VM_LOCKED non-linear VMA that might +map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the +page. munlock_vma_page() will just leave the page unlocked and let vmscan deal +with it - the usual fallback position. + +Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's +reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA. +However, the scan can terminate when it encounters a VM_LOCKED VMA and can +successfully acquire the VMA's mmap semphore for read and mlock the page. +Although try_to_munlock() might be called a great many times when munlocking a +large region or tearing down a large address space that has been mlocked via +mlockall(), overall this is a fairly rare event. + + +PAGE RECLAIM IN shrink_*_list() +------------------------------- + +shrink_active_list() culls any obviously unevictable pages - i.e. +!page_evictable(page, NULL) - diverting these to the unevictable list. +However, shrink_active_list() only sees unevictable pages that made it onto the +active/inactive lru lists. Note that these pages do not have PageUnevictable +set - otherwise they would be on the unevictable list and shrink_active_list +would never see them. Some examples of these unevictable pages on the LRU lists are: -1) ramfs pages that have been placed on the lru lists when first allocated. + (1) ramfs pages that have been placed on the LRU lists when first allocated. + + (2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to + allocate or fault in the pages in the shared memory region. This happens + when an application accesses the page the first time after SHM_LOCK'ing + the segment. -2) SHM_LOCKed shared memory pages. shmctl(SHM_LOCK) does not attempt to - allocate or fault in the pages in the shared memory region. This happens - when an application accesses the page the first time after SHM_LOCKing - the segment. + (3) mlocked pages that could not be isolated from the LRU and moved to the + unevictable list in mlock_vma_page(). -3) Mlocked pages that could not be isolated from the lru and moved to the - unevictable list in mlock_vma_page(). + (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't + acquire the VMA's mmap semaphore to test the flags and set PageMlocked. + munlock_vma_page() was forced to let the page back on to the normal LRU + list for vmscan to handle. -3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't - acquire the vma's mmap semaphore to test the flags and set PageMlocked. - munlock_vma_page() was forced to let the page back on to the normal - LRU list for vmscan to handle. +shrink_inactive_list() also diverts any unevictable pages that it finds on the +inactive lists to the appropriate zone's unevictable list. -shrink_inactive_list() also culls any unevictable pages that it finds on -the inactive lists, again diverting them to the appropriate zone's unevictable -lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became -SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or -pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from -the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice -the latter, but will pass on to shrink_page_list(). +shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd +after shrink_active_list() had moved them to the inactive list, or pages mapped +into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to +recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter, +but will pass on to shrink_page_list(). shrink_page_list() again culls obviously unevictable pages that it could encounter for similar reason to shrink_inactive_list(). Pages mapped into -VM_LOCKED vmas but without PG_mlocked set will make it all the way to +VM_LOCKED VMAs but without PG_mlocked set will make it all the way to try_to_unmap(). shrink_page_list() will divert them to the unevictable list when try_to_unmap() returns SWAP_MLOCK, as discussed above. |
