diff options
Diffstat (limited to 'Documentation')
13 files changed, 16 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt index 652914b17b95..4458d46eab69 100644 --- a/Documentation/devicetree/bindings/clock/arm-integrator.txt +++ b/Documentation/devicetree/bindings/clock/arm-integrator.txt @@ -1,6 +1,6 @@ Clock bindings for ARM Integrator Core Module clocks -Auxilary Oscillator Clock +Auxiliary Oscillator Clock This is a configurable clock fed from a 24 MHz chrystal, used for generating e.g. video clocks. It is located on the diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt index c0a20cd972e3..baf8a3c1b469 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt @@ -1,5 +1,5 @@ SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM). -Currently Freescale powerpc chip C29X is embeded with SEC 6. +Currently Freescale powerpc chip C29X is embedded with SEC 6. SEC 6 device tree binding include: -SEC 6 Node -Job Ring Node diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt index dcebff1928e1..1a4a43d5c9ea 100644 --- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt @@ -9,7 +9,7 @@ Required properties: - interrupts: Should contain the interrupt for the device - clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock. - clock-names: Must contain "adc", matching entry in the clocks property. -- vref-supply: The regulator supply ADC refrence voltage. +- vref-supply: The regulator supply ADC reference voltage. Example: adc0: adc@4003b000 { diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index d81ba30c0d8b..92a6dd80847a 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -46,7 +46,7 @@ sub-node should be of the format as listed below. regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us - BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly + BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly regulator-ramp-delay = <0> can be used for them to disable ramp delay. In the absence of the regulator-ramp-delay property, the default ramp delay will be used. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 65f4f7c43136..817fdc620f26 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -110,8 +110,8 @@ on various other factors also like; Other factor which governs the selection of ecc-scheme is oob-size. Higher ECC schemes require more OOB/Spare area to store ECC syndrome, so the device should have enough free bytes available its OOB/Spare - area to accomodate ECC for entire page. In general following expression - helps in determining if given device can accomodate ECC syndrome: + area to accommodate ECC for entire page. In general following expression + helps in determining if given device can accommodate ECC syndrome: "2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE" where OOBSIZE number of bytes in OOB/spare area @@ -133,5 +133,5 @@ on various other factors also like; Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and trying to use BCH16 (ECC_BYTES=26) ecc-scheme. Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which can be accomodate in the OOB/Spare area of this device + which can be accommodated in the OOB/Spare area of this device (OOBSIZE=128). So this device can use BCH16 ecc-scheme. diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt index 989f6c95cfd5..888c250197fe 100644 --- a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt +++ b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt @@ -17,7 +17,7 @@ Required properties: - samsung,pbl: Integer, Programmable Burst Length. Supported values are 1, 2, 4, 8, 16, or 32. - samsung,burst-map: Integer, Program the possible bursts supported by sxgbe - This is an interger and represents allowable DMA bursts when fixed burst. + This is an integer and represents allowable DMA bursts when fixed burst. Allowable range is 0x01-0x3F. When this field is set fixed burst is enabled. When fixed length is needed for burst mode, it can be set within allowable range. diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt index f0b0436807b4..cf3e205e0b7e 100644 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt @@ -55,7 +55,7 @@ For CAM, this 24-bit offset is: cfg_offset(bus, device, function, register) = bus << 16 | device << 11 | function << 8 | register -Whilst ECAM extends this by 4 bits to accomodate 4k of function space: +Whilst ECAM extends this by 4 bits to accommodate 4k of function space: cfg_offset(bus, device, function, register) = bus << 20 | device << 15 | function << 12 | register diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt index 2aa1840200ed..1293c321754c 100644 --- a/Documentation/devicetree/bindings/phy/phy-bindings.txt +++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt @@ -27,7 +27,7 @@ phys: phy { }; That node describes an IP block (PHY provider) that implements 2 different PHYs. -In order to differentiate between these 2 PHYs, an additonal specifier should be +In order to differentiate between these 2 PHYs, an additional specifier should be given while trying to get a reference to it. PHY user node diff --git a/Documentation/devicetree/bindings/power_supply/charger-manager.txt b/Documentation/devicetree/bindings/power_supply/charger-manager.txt index 2b33750e3db2..ec4fe9de3137 100644 --- a/Documentation/devicetree/bindings/power_supply/charger-manager.txt +++ b/Documentation/devicetree/bindings/power_supply/charger-manager.txt @@ -24,7 +24,7 @@ Optional properties : - cm-thermal-zone : name of external thermometer's thermal zone - cm-battery-* : threshold battery temperature for charging -cold : critical cold temperature of battery for charging - -cold-in-minus : flag that cold temerature is in minus degree + -cold-in-minus : flag that cold temperature is in minus degrees -hot : critical hot temperature of battery for charging -temp-diff : temperature difference to allow recharging - cm-dis/charging-max = limits of charging duration diff --git a/Documentation/devicetree/bindings/sound/st,sta350.txt b/Documentation/devicetree/bindings/sound/st,sta350.txt index b7e71bf5caf4..307398ef2317 100644 --- a/Documentation/devicetree/bindings/sound/st,sta350.txt +++ b/Documentation/devicetree/bindings/sound/st,sta350.txt @@ -33,7 +33,7 @@ Optional properties: 0: Channel 1 1: Channel 2 2: Channel 3 - If parameter is missing, channel 1 is choosen. + If parameter is missing, channel 1 is chosen. This properties have to be specified as '/bits/ 8' values. - st,thermal-warning-recover: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d415b38ec8ca..6d572f750d73 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -134,7 +134,7 @@ tlm Trusted Logic Mobility toradex Toradex AG toshiba Toshiba Corporation toumaz Toumaz -usi Universal Scientifc Industrial Co., Ltd. +usi Universal Scientific Industrial Co., Ltd. v3 V3 Semiconductor variscite Variscite Ltd. via VIA Technologies, Inc. diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt index 1ec175eddca8..47981dd3bfc2 100644 --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt @@ -39,8 +39,8 @@ Atmel LCDC Display ----------------------------------------------------- Required properties (as per of_videomode_helper): - - atmel,dmacon: dma controler configuration - - atmel,lcdcon2: lcd controler configuration + - atmel,dmacon: dma controller configuration + - atmel,lcdcon2: lcd controller configuration - atmel,guard-time: lcd guard time (Delay in frame periods) - bits-per-pixel: lcd panel bit-depth. diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt index 0329f60d431e..8c8c2f4e4c3f 100644 --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt @@ -20,7 +20,7 @@ Optional properties: register is not modified as recommended by the datasheet. - fsl,lpccr: Contrast Control Register value. This property provides the default value for the contrast control register. - If that property is ommited, the register is zeroed. + If that property is omitted, the register is zeroed. - fsl,lscr1: LCDC Sharp Configuration Register value. Example: |