diff options
Diffstat (limited to 'Documentation')
4 files changed, 123 insertions, 22 deletions
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 28a9af953b9d..57aae7765c74 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -8,9 +8,8 @@ Introduction weblink : http://www.st.com/spear The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are - supported by the 'spear' platform of ARM Linux. Currently SPEAr300, - SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX - series is in progress. + supported by the 'spear' platform of ARM Linux. Currently SPEAr1310, + SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Hierarchy in SPEAr is as follows: @@ -26,33 +25,36 @@ Introduction - SPEAr600 (SOC) - SPEAr600 Evaluation Board - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) - - SPEAr1300 (SOC) + - SPEAr1310 (SOC) + - SPEAr1310 Evaluation Board + - SPEAr1340 (SOC) + - SPEAr1340 Evaluation Board Configuration ------------- A generic configuration is provided for each machine, and can be used as the default by - make spear600_defconfig - make spear300_defconfig - make spear310_defconfig - make spear320_defconfig + make spear13xx_defconfig + make spear3xx_defconfig + make spear6xx_defconfig Layout ------ - The common files for multiple machine families (SPEAr3XX, SPEAr6XX and - SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear + The common files for multiple machine families (SPEAr3xx, SPEAr6xx and + SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear with headers in plat/. Each machine series have a directory with name arch/arm/mach-spear followed by series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx. - Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for - spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine - specific files, like spear300.c, spear310.c, spear320.c and spear600.c. - mach-spear* doesn't contains board specific files as they fully support - Flattened Device Tree. + Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for + spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is + mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific + files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and + spear600.c. mach-spear* doesn't contains board specific files as they fully + support Flattened Device Tree. Document Author diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt new file mode 100644 index 000000000000..f2f2171e530e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt @@ -0,0 +1,52 @@ +* Samsung Exynos Interrupt Combiner Controller + +Samsung's Exynos4 architecture includes a interrupt combiner controller which +can combine interrupt sources as a group and provide a single interrupt request +for the group. The interrupt request from each group are connected to a parent +interrupt controller, such as GIC in case of Exynos4210. + +The interrupt combiner controller consists of multiple combiners. Upto eight +interrupt sources can be connected to a combiner. The combiner outputs one +combined interrupt for its eight interrupt sources. The combined interrupt +is usually connected to a parent interrupt controller. + +A single node in the device tree is used to describe the interrupt combiner +controller module (which includes multiple combiners). A combiner in the +interrupt controller module shares config/control registers with other +combiners. For example, a 32-bit interrupt enable/disable config register +can accommodate upto 4 interrupt combiners (with each combiner supporting +upto 8 interrupt sources). + +Required properties: +- compatible: should be "samsung,exynos4210-combiner". +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: should be <2>. The meaning of the cells are + * First Cell: Combiner Group Number. + * Second Cell: Interrupt number within the group. +- reg: Base address and size of interrupt combiner registers. +- interrupts: The list of interrupts generated by the combiners which are then + connected to a parent interrupt controller. The format of the interrupt + specifier depends in the interrupt parent controller. + +Optional properties: +- samsung,combiner-nr: The number of interrupt combiners supported. If this + property is not specified, the default number of combiners is assumed + to be 16. +- interrupt-parent: pHandle of the parent interrupt controller, if not + inherited from the parent node. + + +Example: + + The following is a an example from the Exynos4210 SoC dtsi file. + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt index aa5f355cc947..0d42949df6c2 100644 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings --------------------------------------- Boards with the ST SPEAr600 SoC shall have the following properties: - Required root node property: - compatible = "st,spear600"; Boards with the ST SPEAr300 SoC shall have the following properties: - Required root node property: - compatible = "st,spear300"; Boards with the ST SPEAr310 SoC shall have the following properties: - Required root node property: - compatible = "st,spear310"; Boards with the ST SPEAr320 SoC shall have the following properties: +Required root node property: +compatible = "st,spear320"; +Boards with the ST SPEAr1310 SoC shall have the following properties: Required root node property: +compatible = "st,spear1310"; -compatible = "st,spear320"; +Boards with the ST SPEAr1340 SoC shall have the following properties: +Required root node property: +compatible = "st,spear1340"; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt index 3664d37e6799..b4480d5c3aca 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt @@ -4,6 +4,8 @@ Required properties: - compatible : "st,spear300-pinmux" : "st,spear310-pinmux" : "st,spear320-pinmux" + : "st,spear1310-pinmux" + : "st,spear1340-pinmux" - reg : Address range of the pinctrl registers - st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others. - Its values for SPEAr300: @@ -89,6 +91,37 @@ For SPEAr320 machines: "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp", "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp" +For SPEAr1310 machines: + "i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp", + "i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp", + "smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp", + "smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp", + "nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp", + "keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp", + "gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp", + "sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp", + "uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp", + "uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp", + "i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp", + "i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp", + "i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp", + "can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp", + "pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp", + "ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp" + +For SPEAr1340 machines: + "pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp", + "keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp", + "spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp", + "pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp", + "vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp", + "cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp", + "ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp", + "uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp", + "rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp", + "sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp", + "miphy_dbg_grp", "pcie_grp", "sata_grp" + Valid values for function names are: For All SPEAr3xx machines: "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext", @@ -106,3 +139,17 @@ For SPEAr320 machines: "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen", "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2", "mii0_1", "i2c1", "i2c2" + + +For SPEAr1310 machines: + "i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii", + "rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0", + "gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3", + "uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1", + "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64" + +For SPEAr1340 machines: + "pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1", + "pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0", + "uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf", + "xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata" |