diff options
Diffstat (limited to 'Documentation/video4linux')
| -rw-r--r-- | Documentation/video4linux/README.cx88 | 2 | ||||
| -rw-r--r-- | Documentation/video4linux/bttv/Sound-FAQ | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/video4linux/README.cx88 b/Documentation/video4linux/README.cx88 index 35fae23f883b..b09ce36b921e 100644 --- a/Documentation/video4linux/README.cx88 +++ b/Documentation/video4linux/README.cx88 @@ -50,7 +50,7 @@ the driver. What to do then? cx88-cards.c. If that worked, mail me your changes as unified diff ("diff -u"). (3) Or you can mail me the config information. I need at least the - following informations to add the card: + following information to add the card: * the PCI Subsystem ID ("0070:3400" from the line above, "lspci -v" output is fine too). diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ index d3f1d7783d1c..646a47de0016 100644 --- a/Documentation/video4linux/bttv/Sound-FAQ +++ b/Documentation/video4linux/bttv/Sound-FAQ @@ -55,7 +55,7 @@ receiver chips. Some boards use the i2c bus instead of the gpio pins to connect the mux chip. As mentioned above, there is a array which holds the required -informations for each known board. You basically have to create a new +information for each known board. You basically have to create a new line for your board. The important fields are these two: struct tvcard |