diff options
Diffstat (limited to 'Documentation/media/uapi/v4l/extended-controls.rst')
| -rw-r--r-- | Documentation/media/uapi/v4l/extended-controls.rst | 3087 |
1 files changed, 988 insertions, 2099 deletions
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 71071d73747d..7725c33d8b69 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -49,7 +49,7 @@ control). This is needed since it is often required to atomically change several controls at once. Each of the new ioctls expects a pointer to a struct -:ref:`v4l2_ext_controls <v4l2-ext-controls>`. This structure +:c:type:`v4l2_ext_controls`. This structure contains a pointer to the control array, a count of the number of controls in that array and a control class. Control classes are used to group similar controls into a single class. For example, control class @@ -65,12 +65,12 @@ It is also possible to use an empty control array (``count`` == 0) to check whether the specified control class is supported. The control array is a struct -:ref:`v4l2_ext_control <v4l2-ext-control>` array. The -:ref:`struct v4l2_ext_control <v4l2-ext-control>` structure is very similar to -struct :ref:`v4l2_control <v4l2-control>`, except for the fact that +:c:type:`v4l2_ext_control` array. The +struct :c:type:`v4l2_ext_control` is very similar to +struct :c:type:`v4l2_control`, except for the fact that it also allows for 64-bit values and pointers to be passed. -Since the struct :ref:`v4l2_ext_control <v4l2-ext-control>` supports +Since the struct :c:type:`v4l2_ext_control` supports pointers it is now also possible to have controls with compound types such as N-dimensional arrays and/or structures. You need to specify the ``V4L2_CTRL_FLAG_NEXT_COMPOUND`` when enumerating controls to actually @@ -184,7 +184,9 @@ Codec Control Reference Below all controls within the Codec control class are described. First the generic controls, then controls specific for certain hardware. -.. note:: These controls are applicable to all codecs and not just MPEG. The +.. note:: + + These controls are applicable to all codecs and not just MPEG. The defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG as the controls were originally made for MPEG codecs and later extended to cover all encoding formats. @@ -207,7 +209,10 @@ Codec Control IDs .. _v4l2-mpeg-stream-type: -``V4L2_CID_MPEG_STREAM_TYPE (enum v4l2_mpeg_stream_type)`` +``V4L2_CID_MPEG_STREAM_TYPE`` + (enum) + +enum v4l2_mpeg_stream_type - The MPEG-1, -2 or -4 output stream type. One cannot assume anything here. Each hardware MPEG encoder tends to support different subsets of the available MPEG stream types. This control is specific to @@ -219,42 +224,18 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_STREAM_TYPE_MPEG2_PS`` - - - MPEG-2 program stream - - - .. row 2 - - - ``V4L2_MPEG_STREAM_TYPE_MPEG2_TS`` - - - MPEG-2 transport stream - - - .. row 3 - - - ``V4L2_MPEG_STREAM_TYPE_MPEG1_SS`` - - - MPEG-1 system stream - - - .. row 4 - - - ``V4L2_MPEG_STREAM_TYPE_MPEG2_DVD`` - - - MPEG-2 DVD-compatible stream - - - .. row 5 - - - ``V4L2_MPEG_STREAM_TYPE_MPEG1_VCD`` - - - MPEG-1 VCD-compatible stream - - - .. row 6 - - - ``V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD`` - - - MPEG-2 SVCD-compatible stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_PS`` + - MPEG-2 program stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_TS`` + - MPEG-2 transport stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_SS`` + - MPEG-1 system stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_DVD`` + - MPEG-2 DVD-compatible stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_VCD`` + - MPEG-1 VCD-compatible stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD`` + - MPEG-2 SVCD-compatible stream @@ -280,7 +261,10 @@ Codec Control IDs .. _v4l2-mpeg-stream-vbi-fmt: -``V4L2_CID_MPEG_STREAM_VBI_FMT (enum v4l2_mpeg_stream_vbi_fmt)`` +``V4L2_CID_MPEG_STREAM_VBI_FMT`` + (enum) + +enum v4l2_mpeg_stream_vbi_fmt - Some cards can embed VBI data (e. g. Closed Caption, Teletext) into the MPEG stream. This control selects whether VBI data should be embedded, and if so, what embedding method should be used. The list @@ -289,30 +273,27 @@ Codec Control IDs +.. tabularcolumns:: |p{6 cm}|p{11.5cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_STREAM_VBI_FMT_NONE`` - - - No VBI in the MPEG stream - - - .. row 2 - - - ``V4L2_MPEG_STREAM_VBI_FMT_IVTV`` - - - VBI in private packets, IVTV format (documented in the kernel - sources in the file - ``Documentation/video4linux/cx2341x/README.vbi``) + * - ``V4L2_MPEG_STREAM_VBI_FMT_NONE`` + - No VBI in the MPEG stream + * - ``V4L2_MPEG_STREAM_VBI_FMT_IVTV`` + - VBI in private packets, IVTV format (documented in the kernel + sources in the file + ``Documentation/video4linux/cx2341x/README.vbi``) .. _v4l2-mpeg-audio-sampling-freq: -``V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ (enum v4l2_mpeg_audio_sampling_freq)`` +``V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ`` + (enum) + +enum v4l2_mpeg_audio_sampling_freq - MPEG Audio sampling frequency. Possible values are: @@ -321,30 +302,21 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100`` - - - 44.1 kHz - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000`` - - - 48 kHz - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000`` - - - 32 kHz + * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100`` + - 44.1 kHz + * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000`` + - 48 kHz + * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000`` + - 32 kHz .. _v4l2-mpeg-audio-encoding: -``V4L2_CID_MPEG_AUDIO_ENCODING (enum v4l2_mpeg_audio_encoding)`` +``V4L2_CID_MPEG_AUDIO_ENCODING`` + (enum) + +enum v4l2_mpeg_audio_encoding - MPEG Audio encoding. This control is specific to multiplexed MPEG streams. Possible values are: @@ -354,42 +326,25 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_1`` - - - MPEG-1/2 Layer I encoding - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_2`` - - - MPEG-1/2 Layer II encoding - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_3`` - - - MPEG-1/2 Layer III encoding - - - .. row 4 - - - ``V4L2_MPEG_AUDIO_ENCODING_AAC`` - - - MPEG-2/4 AAC (Advanced Audio Coding) - - - .. row 5 - - - ``V4L2_MPEG_AUDIO_ENCODING_AC3`` - - - AC-3 aka ATSC A/52 encoding + * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_1`` + - MPEG-1/2 Layer I encoding + * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_2`` + - MPEG-1/2 Layer II encoding + * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_3`` + - MPEG-1/2 Layer III encoding + * - ``V4L2_MPEG_AUDIO_ENCODING_AAC`` + - MPEG-2/4 AAC (Advanced Audio Coding) + * - ``V4L2_MPEG_AUDIO_ENCODING_AC3`` + - AC-3 aka ATSC A/52 encoding .. _v4l2-mpeg-audio-l1-bitrate: -``V4L2_CID_MPEG_AUDIO_L1_BITRATE (enum v4l2_mpeg_audio_l1_bitrate)`` +``V4L2_CID_MPEG_AUDIO_L1_BITRATE`` + (enum) + +enum v4l2_mpeg_audio_l1_bitrate - MPEG-1/2 Layer I bitrate. Possible values are: @@ -398,96 +353,43 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_32K`` - - - 32 kbit/s - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_64K`` - - - 64 kbit/s - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_96K`` - - - 96 kbit/s - - - .. row 4 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_128K`` - - - 128 kbit/s - - - .. row 5 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_160K`` - - - 160 kbit/s - - - .. row 6 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_192K`` - - - 192 kbit/s - - - .. row 7 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_224K`` - - - 224 kbit/s - - - .. row 8 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_256K`` - - - 256 kbit/s - - - .. row 9 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_288K`` - - - 288 kbit/s - - - .. row 10 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_320K`` - - - 320 kbit/s - - - .. row 11 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_352K`` - - - 352 kbit/s - - - .. row 12 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_384K`` - - - 384 kbit/s - - - .. row 13 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_416K`` - - - 416 kbit/s - - - .. row 14 - - - ``V4L2_MPEG_AUDIO_L1_BITRATE_448K`` - - - 448 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_32K`` + - 32 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_64K`` + - 64 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_96K`` + - 96 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_128K`` + - 128 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_160K`` + - 160 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_192K`` + - 192 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_224K`` + - 224 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_256K`` + - 256 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_288K`` + - 288 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_320K`` + - 320 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_352K`` + - 352 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_384K`` + - 384 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_416K`` + - 416 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_448K`` + - 448 kbit/s .. _v4l2-mpeg-audio-l2-bitrate: -``V4L2_CID_MPEG_AUDIO_L2_BITRATE (enum v4l2_mpeg_audio_l2_bitrate)`` +``V4L2_CID_MPEG_AUDIO_L2_BITRATE`` + (enum) + +enum v4l2_mpeg_audio_l2_bitrate - MPEG-1/2 Layer II bitrate. Possible values are: @@ -496,96 +398,43 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_32K`` - - - 32 kbit/s - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_48K`` - - - 48 kbit/s - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_56K`` - - - 56 kbit/s - - - .. row 4 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_64K`` - - - 64 kbit/s - - - .. row 5 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_80K`` - - - 80 kbit/s - - - .. row 6 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_96K`` - - - 96 kbit/s - - - .. row 7 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_112K`` - - - 112 kbit/s - - - .. row 8 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_128K`` - - - 128 kbit/s - - - .. row 9 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_160K`` - - - 160 kbit/s - - - .. row 10 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_192K`` - - - 192 kbit/s - - - .. row 11 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_224K`` - - - 224 kbit/s - - - .. row 12 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_256K`` - - - 256 kbit/s - - - .. row 13 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_320K`` - - - 320 kbit/s - - - .. row 14 - - - ``V4L2_MPEG_AUDIO_L2_BITRATE_384K`` - - - 384 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_32K`` + - 32 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_48K`` + - 48 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_56K`` + - 56 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_64K`` + - 64 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_80K`` + - 80 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_96K`` + - 96 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_112K`` + - 112 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_128K`` + - 128 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_160K`` + - 160 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_192K`` + - 192 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_224K`` + - 224 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_256K`` + - 256 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_320K`` + - 320 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_384K`` + - 384 kbit/s .. _v4l2-mpeg-audio-l3-bitrate: -``V4L2_CID_MPEG_AUDIO_L3_BITRATE (enum v4l2_mpeg_audio_l3_bitrate)`` +``V4L2_CID_MPEG_AUDIO_L3_BITRATE`` + (enum) + +enum v4l2_mpeg_audio_l3_bitrate - MPEG-1/2 Layer III bitrate. Possible values are: @@ -594,90 +443,34 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_32K`` - - - 32 kbit/s - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_40K`` - - - 40 kbit/s - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_48K`` - - - 48 kbit/s - - - .. row 4 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_56K`` - - - 56 kbit/s - - - .. row 5 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_64K`` - - - 64 kbit/s - - - .. row 6 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_80K`` - - - 80 kbit/s - - - .. row 7 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_96K`` - - - 96 kbit/s - - - .. row 8 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_112K`` - - - 112 kbit/s - - - .. row 9 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_128K`` - - - 128 kbit/s - - - .. row 10 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_160K`` - - - 160 kbit/s - - - .. row 11 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_192K`` - - - 192 kbit/s - - - .. row 12 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_224K`` - - - 224 kbit/s - - - .. row 13 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_256K`` - - - 256 kbit/s - - - .. row 14 - - - ``V4L2_MPEG_AUDIO_L3_BITRATE_320K`` - - - 320 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_32K`` + - 32 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_40K`` + - 40 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_48K`` + - 48 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_56K`` + - 56 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_64K`` + - 64 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_80K`` + - 80 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_96K`` + - 96 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_112K`` + - 112 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_128K`` + - 128 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_160K`` + - 160 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_192K`` + - 192 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_224K`` + - 224 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_256K`` + - 256 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_320K`` + - 320 kbit/s @@ -686,7 +479,10 @@ Codec Control IDs .. _v4l2-mpeg-audio-ac3-bitrate: -``V4L2_CID_MPEG_AUDIO_AC3_BITRATE (enum v4l2_mpeg_audio_ac3_bitrate)`` +``V4L2_CID_MPEG_AUDIO_AC3_BITRATE`` + (enum) + +enum v4l2_mpeg_audio_ac3_bitrate - AC-3 bitrate. Possible values are: @@ -695,126 +491,53 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_32K`` - - - 32 kbit/s - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_40K`` - - - 40 kbit/s - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_48K`` - - - 48 kbit/s - - - .. row 4 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_56K`` - - - 56 kbit/s - - - .. row 5 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_64K`` - - - 64 kbit/s - - - .. row 6 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_80K`` - - - 80 kbit/s - - - .. row 7 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_96K`` - - - 96 kbit/s - - - .. row 8 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_112K`` - - - 112 kbit/s - - - .. row 9 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_128K`` - - - 128 kbit/s - - - .. row 10 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_160K`` - - - 160 kbit/s - - - .. row 11 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_192K`` - - - 192 kbit/s - - - .. row 12 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_224K`` - - - 224 kbit/s - - - .. row 13 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_256K`` - - - 256 kbit/s - - - .. row 14 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_320K`` - - - 320 kbit/s - - - .. row 15 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_384K`` - - - 384 kbit/s - - - .. row 16 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_448K`` - - - 448 kbit/s - - - .. row 17 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_512K`` - - - 512 kbit/s - - - .. row 18 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_576K`` - - - 576 kbit/s - - - .. row 19 - - - ``V4L2_MPEG_AUDIO_AC3_BITRATE_640K`` - - - 640 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_32K`` + - 32 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_40K`` + - 40 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_48K`` + - 48 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_56K`` + - 56 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_64K`` + - 64 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_80K`` + - 80 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_96K`` + - 96 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_112K`` + - 112 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_128K`` + - 128 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_160K`` + - 160 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_192K`` + - 192 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_224K`` + - 224 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_256K`` + - 256 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_320K`` + - 320 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_384K`` + - 384 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_448K`` + - 448 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_512K`` + - 512 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_576K`` + - 576 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_640K`` + - 640 kbit/s .. _v4l2-mpeg-audio-mode: -``V4L2_CID_MPEG_AUDIO_MODE (enum v4l2_mpeg_audio_mode)`` +``V4L2_CID_MPEG_AUDIO_MODE`` + (enum) + +enum v4l2_mpeg_audio_mode - MPEG Audio mode. Possible values are: @@ -823,36 +546,23 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_MODE_STEREO`` - - - Stereo - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_MODE_JOINT_STEREO`` - - - Joint Stereo - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_MODE_DUAL`` - - - Bilingual - - - .. row 4 - - - ``V4L2_MPEG_AUDIO_MODE_MONO`` - - - Mono + * - ``V4L2_MPEG_AUDIO_MODE_STEREO`` + - Stereo + * - ``V4L2_MPEG_AUDIO_MODE_JOINT_STEREO`` + - Joint Stereo + * - ``V4L2_MPEG_AUDIO_MODE_DUAL`` + - Bilingual + * - ``V4L2_MPEG_AUDIO_MODE_MONO`` + - Mono .. _v4l2-mpeg-audio-mode-extension: -``V4L2_CID_MPEG_AUDIO_MODE_EXTENSION (enum v4l2_mpeg_audio_mode_extension)`` +``V4L2_CID_MPEG_AUDIO_MODE_EXTENSION`` + (enum) + +enum v4l2_mpeg_audio_mode_extension - Joint Stereo audio mode extension. In Layer I and II they indicate which subbands are in intensity stereo. All other subbands are coded in stereo. Layer III is not (yet) supported. Possible values are: @@ -863,36 +573,23 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4`` - - - Subbands 4-31 in intensity stereo - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8`` - - - Subbands 8-31 in intensity stereo - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12`` - - - Subbands 12-31 in intensity stereo - - - .. row 4 - - - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16`` - - - Subbands 16-31 in intensity stereo + * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4`` + - Subbands 4-31 in intensity stereo + * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8`` + - Subbands 8-31 in intensity stereo + * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12`` + - Subbands 12-31 in intensity stereo + * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16`` + - Subbands 16-31 in intensity stereo .. _v4l2-mpeg-audio-emphasis: -``V4L2_CID_MPEG_AUDIO_EMPHASIS (enum v4l2_mpeg_audio_emphasis)`` +``V4L2_CID_MPEG_AUDIO_EMPHASIS`` + (enum) + +enum v4l2_mpeg_audio_emphasis - Audio Emphasis. Possible values are: @@ -901,30 +598,21 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_EMPHASIS_NONE`` - - - None - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS`` - - - 50/15 microsecond emphasis - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17`` - - - CCITT J.17 + * - ``V4L2_MPEG_AUDIO_EMPHASIS_NONE`` + - None + * - ``V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS`` + - 50/15 microsecond emphasis + * - ``V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17`` + - CCITT J.17 .. _v4l2-mpeg-audio-crc: -``V4L2_CID_MPEG_AUDIO_CRC (enum v4l2_mpeg_audio_crc)`` +``V4L2_CID_MPEG_AUDIO_CRC`` + (enum) + +enum v4l2_mpeg_audio_crc - CRC method. Possible values are: @@ -933,18 +621,10 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_CRC_NONE`` - - - None - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_CRC_CRC16`` - - - 16 bit parity check + * - ``V4L2_MPEG_AUDIO_CRC_NONE`` + - None + * - ``V4L2_MPEG_AUDIO_CRC_CRC16`` + - 16 bit parity check @@ -956,63 +636,50 @@ Codec Control IDs .. _v4l2-mpeg-audio-dec-playback: -``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (enum v4l2_mpeg_audio_dec_playback)`` +``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` + (enum) + +enum v4l2_mpeg_audio_dec_playback - Determines how monolingual audio should be played back. Possible values are: +.. tabularcolumns:: |p{9.0cm}|p{8.5cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO`` - - - Automatically determines the best playback mode. - - - .. row 2 - - - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO`` - - - Stereo playback. - - - .. row 3 - - - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT`` - - - Left channel playback. - - - .. row 4 - - - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT`` - - - Right channel playback. - - - .. row 5 - - - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO`` - - - Mono playback. - - - .. row 6 - - - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO`` - - - Stereo playback with swapped left and right channels. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO`` + - Automatically determines the best playback mode. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO`` + - Stereo playback. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT`` + - Left channel playback. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT`` + - Right channel playback. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO`` + - Mono playback. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO`` + - Stereo playback with swapped left and right channels. .. _v4l2-mpeg-audio-dec-multilingual-playback: -``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (enum v4l2_mpeg_audio_dec_playback)`` +``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` + (enum) + +enum v4l2_mpeg_audio_dec_playback - Determines how multilingual audio should be played back. .. _v4l2-mpeg-video-encoding: -``V4L2_CID_MPEG_VIDEO_ENCODING (enum v4l2_mpeg_video_encoding)`` +``V4L2_CID_MPEG_VIDEO_ENCODING`` + (enum) + +enum v4l2_mpeg_video_encoding - MPEG Video encoding method. This control is specific to multiplexed MPEG streams. Possible values are: @@ -1022,30 +689,21 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_1`` - - - MPEG-1 Video encoding - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_2`` - - - MPEG-2 Video encoding - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC`` - - - MPEG-4 AVC (H.264) Video encoding + * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_1`` + - MPEG-1 Video encoding + * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_2`` + - MPEG-2 Video encoding + * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC`` + - MPEG-4 AVC (H.264) Video encoding .. _v4l2-mpeg-video-aspect: -``V4L2_CID_MPEG_VIDEO_ASPECT (enum v4l2_mpeg_video_aspect)`` +``V4L2_CID_MPEG_VIDEO_ASPECT`` + (enum) + +enum v4l2_mpeg_video_aspect - Video aspect. Possible values are: @@ -1054,22 +712,10 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_ASPECT_1x1`` - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_ASPECT_4x3`` - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_ASPECT_16x9`` - - - .. row 4 - - - ``V4L2_MPEG_VIDEO_ASPECT_221x100`` + * - ``V4L2_MPEG_VIDEO_ASPECT_1x1`` + * - ``V4L2_MPEG_VIDEO_ASPECT_4x3`` + * - ``V4L2_MPEG_VIDEO_ASPECT_16x9`` + * - ``V4L2_MPEG_VIDEO_ASPECT_221x100`` @@ -1087,7 +733,10 @@ Codec Control IDs .. _v4l2-mpeg-video-bitrate-mode: -``V4L2_CID_MPEG_VIDEO_BITRATE_MODE (enum v4l2_mpeg_video_bitrate_mode)`` +``V4L2_CID_MPEG_VIDEO_BITRATE_MODE`` + (enum) + +enum v4l2_mpeg_video_bitrate_mode - Video bitrate mode. Possible values are: @@ -1096,18 +745,10 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_BITRATE_MODE_VBR`` - - - Variable bitrate - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR`` - - - Constant bitrate + * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_VBR`` + - Variable bitrate + * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR`` + - Constant bitrate @@ -1138,30 +779,14 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - Bit 0:7 - - - V chrominance information - - - .. row 2 - - - Bit 8:15 - - - U chrominance information - - - .. row 3 - - - Bit 16:23 - - - Y luminance information - - - .. row 4 - - - Bit 24:31 - - - Must be zero. + * - Bit 0:7 + - V chrominance information + * - Bit 8:15 + - U chrominance information + * - Bit 16:23 + - Y luminance information + * - Bit 24:31 + - Must be zero. @@ -1191,7 +816,10 @@ Codec Control IDs .. _v4l2-mpeg-video-h264-vui-sar-idc: -``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC (enum v4l2_mpeg_video_h264_vui_sar_idc)`` +``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC`` + (enum) + +enum v4l2_mpeg_video_h264_vui_sar_idc - VUI sample aspect ratio indicator for H.264 encoding. The value is defined in the table E-1 in the standard. Applicable to the H264 encoder. @@ -1202,114 +830,42 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED`` - - - Unspecified - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1`` - - - 1x1 - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11`` - - - 12x11 - - - .. row 4 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11`` - - - 10x11 - - - .. row 5 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11`` - - - 16x11 - - - .. row 6 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33`` - - - 40x33 - - - .. row 7 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11`` - - - 24x11 - - - .. row 8 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11`` - - - 20x11 - - - .. row 9 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11`` - - - 32x11 - - - .. row 10 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33`` - - - 80x33 - - - .. row 11 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11`` - - - 18x11 - - - .. row 12 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11`` - - - 15x11 - - - .. row 13 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33`` - - - 64x33 - - - .. row 14 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99`` - - - 160x99 - - - .. row 15 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3`` - - - 4x3 - - - .. row 16 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2`` - - - 3x2 - - - .. row 17 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1`` - - - 2x1 - - - .. row 18 - - - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED`` - - - Extended SAR + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED`` + - Unspecified + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1`` + - 1x1 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11`` + - 12x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11`` + - 10x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11`` + - 16x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33`` + - 40x33 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11`` + - 24x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11`` + - 20x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11`` + - 32x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33`` + - 80x33 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11`` + - 18x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11`` + - 15x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33`` + - 64x33 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99`` + - 160x99 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3`` + - 4x3 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2`` + - 3x2 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1`` + - 2x1 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED`` + - Extended SAR @@ -1323,7 +879,10 @@ Codec Control IDs .. _v4l2-mpeg-video-h264-level: -``V4L2_CID_MPEG_VIDEO_H264_LEVEL (enum v4l2_mpeg_video_h264_level)`` +``V4L2_CID_MPEG_VIDEO_H264_LEVEL`` + (enum) + +enum v4l2_mpeg_video_h264_level - The level information for the H264 video elementary stream. Applicable to the H264 encoder. Possible values are: @@ -1333,108 +892,47 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_0`` - - - Level 1.0 - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_1B`` - - - Level 1B - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_1`` - - - Level 1.1 - - - .. row 4 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_2`` - - - Level 1.2 - - - .. row 5 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_3`` - - - Level 1.3 - - - .. row 6 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_0`` - - - Level 2.0 - - - .. row 7 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_1`` - - - Level 2.1 - - - .. row 8 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_2`` - - - Level 2.2 - - - .. row 9 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_0`` - - - Level 3.0 - - - .. row 10 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_1`` - - - Level 3.1 - - - .. row 11 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_2`` - - - Level 3.2 - - - .. row 12 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_0`` - - - Level 4.0 - - - .. row 13 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_1`` - - - Level 4.1 - - - .. row 14 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_2`` - - - Level 4.2 - - - .. row 15 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_0`` - - - Level 5.0 - - - .. row 16 - - - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_1`` - - - Level 5.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_0`` + - Level 1.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1B`` + - Level 1B + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_1`` + - Level 1.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_2`` + - Level 1.2 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_3`` + - Level 1.3 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_0`` + - Level 2.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_1`` + - Level 2.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_2`` + - Level 2.2 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_0`` + - Level 3.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_1`` + - Level 3.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_2`` + - Level 3.2 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_0`` + - Level 4.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_1`` + - Level 4.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_2`` + - Level 4.2 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_0`` + - Level 5.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_1`` + - Level 5.1 .. _v4l2-mpeg-video-mpeg4-level: -``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL (enum v4l2_mpeg_video_mpeg4_level)`` +``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL`` + (enum) + +enum v4l2_mpeg_video_mpeg4_level - The level information for the MPEG4 elementary stream. Applicable to the MPEG4 encoder. Possible values are: @@ -1444,60 +942,31 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_LEVEL_0`` - - - Level 0 - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_LEVEL_0B`` - - - Level 0b - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_LEVEL_1`` - - - Level 1 - - - .. row 4 - - - ``V4L2_MPEG_VIDEO_LEVEL_2`` - - - Level 2 - - - .. row 5 - - - ``V4L2_MPEG_VIDEO_LEVEL_3`` - - - Level 3 - - - .. row 6 - - - ``V4L2_MPEG_VIDEO_LEVEL_3B`` - - - Level 3b - - - .. row 7 - - - ``V4L2_MPEG_VIDEO_LEVEL_4`` - - - Level 4 - - - .. row 8 - - - ``V4L2_MPEG_VIDEO_LEVEL_5`` - - - Level 5 + * - ``V4L2_MPEG_VIDEO_LEVEL_0`` + - Level 0 + * - ``V4L2_MPEG_VIDEO_LEVEL_0B`` + - Level 0b + * - ``V4L2_MPEG_VIDEO_LEVEL_1`` + - Level 1 + * - ``V4L2_MPEG_VIDEO_LEVEL_2`` + - Level 2 + * - ``V4L2_MPEG_VIDEO_LEVEL_3`` + - Level 3 + * - ``V4L2_MPEG_VIDEO_LEVEL_3B`` + - Level 3b + * - ``V4L2_MPEG_VIDEO_LEVEL_4`` + - Level 4 + * - ``V4L2_MPEG_VIDEO_LEVEL_5`` + - Level 5 .. _v4l2-mpeg-video-h264-profile: -``V4L2_CID_MPEG_VIDEO_H264_PROFILE (enum v4l2_mpeg_video_h264_profile)`` +``V4L2_CID_MPEG_VIDEO_H264_PROFILE`` + (enum) + +enum v4l2_mpeg_video_h264_profile - The profile information for H264. Applicable to the H264 encoder. Possible values are: @@ -1507,114 +976,49 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE`` - - - Baseline profile - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE`` - - - Constrained Baseline profile - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_MAIN`` - - - Main profile - - - .. row 4 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED`` - - - Extended profile - - - .. row 5 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH`` - - - High profile - - - .. row 6 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10`` - - - High 10 profile - - - .. row 7 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422`` - - - High 422 profile - - - .. row 8 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE`` - - - High 444 Predictive profile - - - .. row 9 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA`` - - - High 10 Intra profile - - - .. row 10 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA`` - - - High 422 Intra profile - - - .. row 11 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA`` - - - High 444 Intra profile - - - .. row 12 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA`` - - - CAVLC 444 Intra profile - - - .. row 13 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE`` - - - Scalable Baseline profile - - - .. row 14 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH`` - - - Scalable High profile - - - .. row 15 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA`` - - - Scalable High Intra profile - - - .. row 16 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH`` - - - Stereo High profile - - - .. row 17 - - - ``V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH`` - - - Multiview High profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE`` + - Baseline profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE`` + - Constrained Baseline profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MAIN`` + - Main profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED`` + - Extended profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH`` + - High profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10`` + - High 10 profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422`` + - High 422 profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE`` + - High 444 Predictive profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA`` + - High 10 Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA`` + - High 422 Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA`` + - High 444 Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA`` + - CAVLC 444 Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE`` + - Scalable Baseline profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH`` + - Scalable High profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA`` + - Scalable High Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH`` + - Stereo High profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH`` + - Multiview High profile .. _v4l2-mpeg-video-mpeg4-profile: -``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE (enum v4l2_mpeg_video_mpeg4_profile)`` +``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE`` + (enum) + +enum v4l2_mpeg_video_mpeg4_profile - The profile information for MPEG4. Applicable to the MPEG4 encoder. Possible values are: @@ -1624,36 +1028,16 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_PROFILE_SIMPLE`` - - - Simple profile - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_PROFILE_ADVANCED_SIMPLE`` - - - Advanced Simple profile - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_PROFILE_CORE`` - - - Core profile - - - .. row 4 - - - ``V4L2_MPEG_VIDEO_PROFILE_SIMPLE_SCALABLE`` - - - Simple Scalable profile - - - .. row 5 - - - ``V4L2_MPEG_VIDEO_PROFILE_ADVANCED_CODING_EFFICIENCY`` - - - + * - ``V4L2_MPEG_VIDEO_PROFILE_SIMPLE`` + - Simple profile + * - ``V4L2_MPEG_VIDEO_PROFILE_ADVANCED_SIMPLE`` + - Advanced Simple profile + * - ``V4L2_MPEG_VIDEO_PROFILE_CORE`` + - Core profile + * - ``V4L2_MPEG_VIDEO_PROFILE_SIMPLE_SCALABLE`` + - Simple Scalable profile + * - ``V4L2_MPEG_VIDEO_PROFILE_ADVANCED_CODING_EFFICIENCY`` + - @@ -1663,34 +1047,27 @@ Codec Control IDs .. _v4l2-mpeg-video-multi-slice-mode: -``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE (enum v4l2_mpeg_video_multi_slice_mode)`` +``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` + (enum) + +enum v4l2_mpeg_video_multi_slice_mode - Determines how the encoder should handle division of frame into slices. Applicable to the encoder. Possible values are: +.. tabularcolumns:: |p{8.7cm}|p{8.8cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE`` - - - Single slice per frame. - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB`` - - - Multiple slices with set maximum number of macroblocks per slice. - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES`` - - - Multiple slice with set maximum size in bytes per slice. + * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE`` + - Single slice per frame. + * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB`` + - Multiple slices with set maximum number of macroblocks per slice. + * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES`` + - Multiple slice with set maximum size in bytes per slice. @@ -1708,33 +1085,26 @@ Codec Control IDs .. _v4l2-mpeg-video-h264-loop-filter-mode: -``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE (enum v4l2_mpeg_video_h264_loop_filter_mode)`` +``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE`` + (enum) + +enum v4l2_mpeg_video_h264_loop_filter_mode - Loop filter mode for H264 encoder. Possible values are: +.. tabularcolumns:: |p{14.0cm}|p{3.5cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED`` - - - Loop filter is enabled. - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED`` - - - Loop filter is disabled. - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY`` - - - Loop filter is disabled at the slice boundary. + * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED`` + - Loop filter is enabled. + * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED`` + - Loop filter is disabled. + * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY`` + - Loop filter is disabled at the slice boundary. @@ -1748,7 +1118,10 @@ Codec Control IDs .. _v4l2-mpeg-video-h264-entropy-mode: -``V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE (enum v4l2_mpeg_video_h264_entropy_mode)`` +``V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE`` + (enum) + +enum v4l2_mpeg_video_h264_entropy_mode - Entropy coding mode for H264 - CABAC/CAVALC. Applicable to the H264 encoder. Possible values are: @@ -1758,18 +1131,10 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC`` - - - Use CAVLC entropy coding. - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC`` - - - Use CABAC entropy coding. + * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC`` + - Use CAVLC entropy coding. + * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC`` + - Use CABAC entropy coding. @@ -1909,30 +1274,27 @@ Codec Control IDs .. _v4l2-mpeg-video-header-mode: -``V4L2_CID_MPEG_VIDEO_HEADER_MODE (enum v4l2_mpeg_video_header_mode)`` +``V4L2_CID_MPEG_VIDEO_HEADER_MODE`` + (enum) + +enum v4l2_mpeg_video_header_mode - Determines whether the header is returned as the first buffer or is it returned together with the first frame. Applicable to encoders. Possible values are: +.. tabularcolumns:: |p{10.3cm}|p{7.2cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE`` - - - The stream header is returned separately in the first buffer. - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME`` - - - The stream header is returned together with the first encoded - frame. + * - ``V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE`` + - The stream header is returned separately in the first buffer. + * - ``V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME`` + - The stream header is returned together with the first encoded + frame. @@ -1965,52 +1327,31 @@ Codec Control IDs .. _v4l2-mpeg-video-h264-sei-fp-arrangement-type: -``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE (enum v4l2_mpeg_video_h264_sei_fp_arrangement_type)`` +``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE`` + (enum) + +enum v4l2_mpeg_video_h264_sei_fp_arrangement_type - Frame packing arrangement type for H264 SEI. Applicable to the H264 encoder. Possible values are: - +.. tabularcolumns:: |p{12cm}|p{5.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHEKERBOARD`` - - - Pixels are alternatively from L and R. - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN`` - - - L and R are interlaced by column. - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW`` - - - L and R are interlaced by row. - - - .. row 4 - - - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE`` - - - L is on the left, R on the right. - - - .. row 5 - - - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM`` - - - L is on top, R on bottom. - - - .. row 6 - - - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL`` - - - One view per frame. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHEKERBOARD`` + - Pixels are alternatively from L and R. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN`` + - L and R are interlaced by column. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW`` + - L and R are interlaced by row. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE`` + - L is on the left, R on the right. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM`` + - L is on top, R on bottom. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL`` + - One view per frame. @@ -2021,61 +1362,36 @@ Codec Control IDs .. _v4l2-mpeg-video-h264-fmo-map-type: -``V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE (enum v4l2_mpeg_video_h264_fmo_map_type)`` +``V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE`` + (enum) + +enum v4l2_mpeg_video_h264_fmo_map_type - When using FMO, the map type divides the image in different scan patterns of macroblocks. Applicable to the H264 encoder. Possible values are: - +.. tabularcolumns:: |p{12.5cm}|p{5.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES`` - - - Slices are interleaved one after other with macroblocks in run - length order. - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES`` - - - Scatters the macroblocks based on a mathematical function known to - both encoder and decoder. - - - .. row 3 - - - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER`` - - - Macroblocks arranged in rectangular areas or regions of interest. - - - .. row 4 - - - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT`` - - - Slice groups grow in a cyclic way from centre to outwards. - - - .. row 5 - - - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN`` - - - Slice groups grow in raster scan pattern from left to right. - - - .. row 6 - - - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN`` - - - Slice groups grow in wipe scan pattern from top to bottom. - - - .. row 7 - - - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT`` - - - User defined map type. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES`` + - Slices are interleaved one after other with macroblocks in run + length order. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES`` + - Scatters the macroblocks based on a mathematical function known to + both encoder and decoder. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER`` + - Macroblocks arranged in rectangular areas or regions of interest. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT`` + - Slice groups grow in a cyclic way from centre to outwards. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN`` + - Slice groups grow in raster scan pattern from left to right. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN`` + - Slice groups grow in wipe scan pattern from top to bottom. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT`` + - User defined map type. @@ -2084,7 +1400,10 @@ Codec Control IDs .. _v4l2-mpeg-video-h264-fmo-change-direction: -``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION (enum v4l2_mpeg_video_h264_fmo_change_dir)`` +``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION`` + (enum) + +enum v4l2_mpeg_video_h264_fmo_change_dir - Specifies a direction of the slice group change for raster and wipe maps. Applicable to the H264 encoder. Possible values are: @@ -2094,18 +1413,10 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT`` - - - Raster scan or wipe right. - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT`` - - - Reverse raster scan or wipe left. + * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT`` + - Raster scan or wipe right. + * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT`` + - Reverse raster scan or wipe left. @@ -2132,18 +1443,10 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - Bit 0:15 - - - Slice ID - - - .. row 2 - - - Bit 16:32 - - - Slice position or order + * - Bit 0:15 + - Slice ID + * - Bit 16:32 + - Slice position or order @@ -2152,7 +1455,10 @@ Codec Control IDs .. _v4l2-mpeg-video-h264-hierarchical-coding-type: -``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE (enum v4l2_mpeg_video_h264_hierarchical_coding_type)`` +``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE`` + (enum) + +enum v4l2_mpeg_video_h264_hierarchical_coding_type - Specifies the hierarchical coding type. Applicable to the H264 encoder. Possible values are: @@ -2162,18 +1468,10 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B`` - - - Hierarchical B coding. - - - .. row 2 - - - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P`` - - - Hierarchical P coding. + * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B`` + - Hierarchical B coding. + * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P`` + - Hierarchical P coding. @@ -2192,18 +1490,10 @@ Codec Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - Bit 0:15 - - - QP value - - - .. row 2 - - - Bit 16:32 - - - Layer number + * - Bit 0:15 + - QP value + * - Bit 16:32 + - Layer number @@ -2255,30 +1545,14 @@ MFC 5.1 Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - Bit 0:7 - - - V chrominance information - - - .. row 2 - - - Bit 8:15 - - - U chrominance information - - - .. row 3 - - - Bit 16:23 - - - Y luminance information - - - .. row 4 - - - Bit 24:31 - - - Must be zero. + * - Bit 0:7 + - V chrominance information + * - Bit 8:15 + - U chrominance information + * - Bit 16:23 + - Y luminance information + * - Bit 24:31 + - Must be zero. @@ -2321,38 +1595,30 @@ MFC 5.1 Control IDs .. _v4l2-mpeg-mfc51-video-frame-skip-mode: -``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE (enum v4l2_mpeg_mfc51_video_frame_skip_mode)`` +``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE`` + (enum) + +enum v4l2_mpeg_mfc51_video_frame_skip_mode - Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then a chosen data limit then the frame will be skipped. Possible values are: +.. tabularcolumns:: |p{9.0cm}|p{8.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED`` - - - Frame skip mode is disabled. - - - .. row 2 - - - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT`` - - - Frame skip mode enabled and buffer limit is set by the chosen - level and is defined by the standard. - - - .. row 3 - - - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT`` - - - Frame skip mode enabled and buffer limit is set by the VBV - (MPEG1/2/4) or CPB (H264) buffer size control. + * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED`` + - Frame skip mode is disabled. + * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT`` + - Frame skip mode enabled and buffer limit is set by the chosen + level and is defined by the standard. + * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT`` + - Frame skip mode enabled and buffer limit is set by the VBV + (MPEG1/2/4) or CPB (H264) buffer size control. @@ -2370,7 +1636,10 @@ MFC 5.1 Control IDs .. _v4l2-mpeg-mfc51-video-force-frame-type: -``V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE (enum v4l2_mpeg_mfc51_video_force_frame_type)`` +``V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE`` + (enum) + +enum v4l2_mpeg_mfc51_video_force_frame_type - Force a frame type for the next queued buffer. Applicable to encoders. Possible values are: @@ -2380,24 +1649,12 @@ MFC 5.1 Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_DISABLED`` - - - Forcing a specific frame type disabled. - - - .. row 2 - - - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME`` - - - Force an I-frame. - - - .. row 3 - - - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_NOT_CODED`` - - - Force a non-coded frame. + * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_DISABLED`` + - Forcing a specific frame type disabled. + * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME`` + - Force an I-frame. + * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_NOT_CODED`` + - Force a non-coded frame. @@ -2416,7 +1673,10 @@ CX2341x Control IDs .. _v4l2-mpeg-cx2341x-video-spatial-filter-mode: -``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (enum v4l2_mpeg_cx2341x_video_spatial_filter_mode)`` +``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_spatial_filter_mode - Sets the Spatial Filter mode (default ``MANUAL``). Possible values are: @@ -2426,18 +1686,10 @@ CX2341x Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL`` - - - Choose the filter manually - - - .. row 2 - - - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO`` - - - Choose the filter automatically + * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL`` + - Choose the filter manually + * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO`` + - Choose the filter automatically @@ -2447,52 +1699,40 @@ CX2341x Control IDs .. _luma-spatial-filter-type: -``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE (enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type)`` +``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type - Select the algorithm to use for the Luma Spatial Filter (default ``1D_HOR``). Possible values: +.. tabularcolumns:: |p{14.5cm}|p{3.0cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF`` - - - No filter - - - .. row 2 - - - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR`` - - - One-dimensional horizontal - - - .. row 3 - - - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT`` - - - One-dimensional vertical - - - .. row 4 - - - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE`` - - - Two-dimensional separable - - - .. row 5 - - - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE`` - - - Two-dimensional symmetrical non-separable + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF`` + - No filter + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR`` + - One-dimensional horizontal + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT`` + - One-dimensional vertical + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE`` + - Two-dimensional separable + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE`` + - Two-dimensional symmetrical non-separable .. _chroma-spatial-filter-type: -``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE (enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type)`` +``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type - Select the algorithm for the Chroma Spatial Filter (default ``1D_HOR``). Possible values are: @@ -2502,24 +1742,19 @@ CX2341x Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF`` - - - No filter - - - .. row 2 - - - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR`` - - - One-dimensional horizontal + * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF`` + - No filter + * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR`` + - One-dimensional horizontal .. _v4l2-mpeg-cx2341x-video-temporal-filter-mode: -``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE (enum v4l2_mpeg_cx2341x_video_temporal_filter_mode)`` +``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_temporal_filter_mode - Sets the Temporal Filter mode (default ``MANUAL``). Possible values are: @@ -2529,18 +1764,10 @@ CX2341x Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL`` - - - Choose the filter manually - - - .. row 2 - - - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO`` - - - Choose the filter automatically + * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL`` + - Choose the filter manually + * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO`` + - Choose the filter automatically @@ -2550,7 +1777,10 @@ CX2341x Control IDs .. _v4l2-mpeg-cx2341x-video-median-filter-type: -``V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE (enum v4l2_mpeg_cx2341x_video_median_filter_type)`` +``V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_median_filter_type - Median Filter Type (default ``OFF``). Possible values are: @@ -2559,36 +1789,16 @@ CX2341x Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF`` - - - No filter - - - .. row 2 - - - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR`` - - - Horizontal filter - - - .. row 3 - - - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT`` - - - Vertical filter - - - .. row 4 - - - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT`` - - - Horizontal and vertical filter - - - .. row 5 - - - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG`` - - - Diagonal filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF`` + - No filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR`` + - Horizontal filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT`` + - Vertical filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT`` + - Horizontal and vertical filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG`` + - Diagonal filter @@ -2631,7 +1841,10 @@ VPX Control IDs .. _v4l2-vpx-num-partitions: -``V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS (enum v4l2_vp8_num_partitions)`` +``V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS`` + (enum) + +enum v4l2_vp8_num_partitions - The number of token partitions to use in VP8 encoder. Possible values are: @@ -2641,30 +1854,14 @@ VPX Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION`` - - - 1 coefficient partition - - - .. row 2 - - - ``V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS`` - - - 2 coefficient partitions - - - .. row 3 - - - ``V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS`` - - - 4 coefficient partitions - - - .. row 4 - - - ``V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS`` - - - 8 coefficient partitions + * - ``V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION`` + - 1 coefficient partition + * - ``V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS`` + - 2 coefficient partitions + * - ``V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS`` + - 4 coefficient partitions + * - ``V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS`` + - 8 coefficient partitions @@ -2673,37 +1870,28 @@ VPX Control IDs .. _v4l2-vpx-num-ref-frames: -``V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES (enum v4l2_vp8_num_ref_frames)`` +``V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES`` + (enum) + +enum v4l2_vp8_num_ref_frames - The number of reference pictures for encoding P frames. Possible values are: - +.. tabularcolumns:: |p{7.9cm}|p{9.6cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME`` - - - Last encoded frame will be searched - - - .. row 2 - - - ``V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME`` - - - Two frames will be searched among the last encoded frame, the - golden frame and the alternate reference (altref) frame. The - encoder implementation will decide which two are chosen. - - - .. row 3 - - - ``V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME`` - - - The last encoded frame, the golden frame and the altref frame will - be searched. + * - ``V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME`` + - Last encoded frame will be searched + * - ``V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME`` + - Two frames will be searched among the last encoded frame, the + golden frame and the alternate reference (altref) frame. The + encoder implementation will decide which two are chosen. + * - ``V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME`` + - The last encoded frame, the golden frame and the altref frame will + be searched. @@ -2726,31 +1914,33 @@ VPX Control IDs .. _v4l2-vpx-golden-frame-sel: -``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL (enum v4l2_vp8_golden_frame_sel)`` +``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL`` + (enum) + +enum v4l2_vp8_golden_frame_sel - Selects the golden frame for encoding. Possible values are: +.. raw:: latex + \begin{adjustbox}{width=\columnwidth} + +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 + * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV`` + - Use the (n-2)th frame as a golden frame, current frame index being + 'n'. + * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD`` + - Use the previous specific frame indicated by + ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD`` as a + golden frame. - - .. row 1 - - - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV`` - - - Use the (n-2)th frame as a golden frame, current frame index being - 'n'. - - - .. row 2 - - - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD`` - - - Use the previous specific frame indicated by - V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD as a - golden frame. +.. raw:: latex + \end{adjustbox} ``V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (integer)`` @@ -2791,7 +1981,10 @@ Camera Control IDs .. _v4l2-exposure-auto-type: -``V4L2_CID_EXPOSURE_AUTO (enum v4l2_exposure_auto_type)`` +``V4L2_CID_EXPOSURE_AUTO`` + (enum) + +enum v4l2_exposure_auto_type - Enables automatic adjustments of the exposure time and/or iris aperture. The effect of manual changes of the exposure time or iris aperture while these features are enabled is undefined, drivers @@ -2803,30 +1996,14 @@ Camera Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_EXPOSURE_AUTO`` - - - Automatic exposure time, automatic iris aperture. - - - .. row 2 - - - ``V4L2_EXPOSURE_MANUAL`` - - - Manual exposure time, manual iris. - - - .. row 3 - - - ``V4L2_EXPOSURE_SHUTTER_PRIORITY`` - - - Manual exposure time, auto iris. - - - .. row 4 - - - ``V4L2_EXPOSURE_APERTURE_PRIORITY`` - - - Auto exposure time, manual iris. + * - ``V4L2_EXPOSURE_AUTO`` + - Automatic exposure time, automatic iris aperture. + * - ``V4L2_EXPOSURE_MANUAL`` + - Manual exposure time, manual iris. + * - ``V4L2_EXPOSURE_SHUTTER_PRIORITY`` + - Manual exposure time, auto iris. + * - ``V4L2_EXPOSURE_APERTURE_PRIORITY`` + - Auto exposure time, manual iris. @@ -2856,45 +2033,32 @@ Camera Control IDs .. _v4l2-exposure-metering: -``V4L2_CID_EXPOSURE_METERING (enum v4l2_exposure_metering)`` +``V4L2_CID_EXPOSURE_METERING`` + (enum) + +enum v4l2_exposure_metering - Determines how the camera measures the amount of light available for the frame exposure. Possible values are: - +.. tabularcolumns:: |p{8.5cm}|p{9.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_EXPOSURE_METERING_AVERAGE`` - - - Use the light information coming from the entire frame and average - giving no weighting to any particular portion of the metered area. - - - .. row 2 - - - ``V4L2_EXPOSURE_METERING_CENTER_WEIGHTED`` - - - Average the light information coming from the entire frame giving - priority to the center of the metered area. - - - .. row 3 - - - ``V4L2_EXPOSURE_METERING_SPOT`` - - - Measure only very small area at the center of the frame. - - - .. row 4 - - - ``V4L2_EXPOSURE_METERING_MATRIX`` - - - A multi-zone metering. The light intensity is measured in several - points of the frame and the results are combined. The algorithm of - the zones selection and their significance in calculating the - final value is device dependent. + * - ``V4L2_EXPOSURE_METERING_AVERAGE`` + - Use the light information coming from the entire frame and average + giving no weighting to any particular portion of the metered area. + * - ``V4L2_EXPOSURE_METERING_CENTER_WEIGHTED`` + - Average the light information coming from the entire frame giving + priority to the center of the metered area. + * - ``V4L2_EXPOSURE_METERING_SPOT`` + - Measure only very small area at the center of the frame. + * - ``V4L2_EXPOSURE_METERING_MATRIX`` + - A multi-zone metering. The light intensity is measured in several + points of the frame and the results are combined. The algorithm of + the zones selection and their significance in calculating the + final value is device dependent. @@ -2968,77 +2132,48 @@ Camera Control IDs control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS`` control value. - +.. tabularcolumns:: |p{6.5cm}|p{11.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_AUTO_FOCUS_STATUS_IDLE`` - - - Automatic focus is not active. - - - .. row 2 - - - ``V4L2_AUTO_FOCUS_STATUS_BUSY`` - - - Automatic focusing is in progress. - - - .. row 3 - - - ``V4L2_AUTO_FOCUS_STATUS_REACHED`` - - - Focus has been reached. - - - .. row 4 - - - ``V4L2_AUTO_FOCUS_STATUS_FAILED`` - - - Automatic focus has failed, the driver will not transition from - this state until another action is performed by an application. + * - ``V4L2_AUTO_FOCUS_STATUS_IDLE`` + - Automatic focus is not active. + * - ``V4L2_AUTO_FOCUS_STATUS_BUSY`` + - Automatic focusing is in progress. + * - ``V4L2_AUTO_FOCUS_STATUS_REACHED`` + - Focus has been reached. + * - ``V4L2_AUTO_FOCUS_STATUS_FAILED`` + - Automatic focus has failed, the driver will not transition from + this state until another action is performed by an application. .. _v4l2-auto-focus-range: -``V4L2_CID_AUTO_FOCUS_RANGE (enum v4l2_auto_focus_range)`` - Determines auto focus distance range for which lens may be adjusted. +``V4L2_CID_AUTO_FOCUS_RANGE`` + (enum) +enum v4l2_auto_focus_range - + Determines auto focus distance range for which lens may be adjusted. +.. tabularcolumns:: |p{6.5cm}|p{11.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_AUTO_FOCUS_RANGE_AUTO`` - - - The camera automatically selects the focus range. - - - .. row 2 - - - ``V4L2_AUTO_FOCUS_RANGE_NORMAL`` - - - Normal distance range, limited for best automatic focus - performance. - - - .. row 3 - - - ``V4L2_AUTO_FOCUS_RANGE_MACRO`` - - - Macro (close-up) auto focus. The camera will use its minimum - possible distance for auto focus. - - - .. row 4 - - - ``V4L2_AUTO_FOCUS_RANGE_INFINITY`` - - - The lens is set to focus on an object at infinite distance. + * - ``V4L2_AUTO_FOCUS_RANGE_AUTO`` + - The camera automatically selects the focus range. + * - ``V4L2_AUTO_FOCUS_RANGE_NORMAL`` + - Normal distance range, limited for best automatic focus + performance. + * - ``V4L2_AUTO_FOCUS_RANGE_MACRO`` + - Macro (close-up) auto focus. The camera will use its minimum + possible distance for auto focus. + * - ``V4L2_AUTO_FOCUS_RANGE_INFINITY`` + - The lens is set to focus on an object at infinite distance. @@ -3088,90 +2223,53 @@ Camera Control IDs .. _v4l2-auto-n-preset-white-balance: -``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE (enum v4l2_auto_n_preset_white_balance)`` +``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE`` + (enum) + +enum v4l2_auto_n_preset_white_balance - Sets white balance to automatic, manual or a preset. The presets determine color temperature of the light as a hint to the camera for white balance adjustments resulting in most accurate color representation. The following white balance presets are listed in order of increasing color temperature. - +.. tabularcolumns:: |p{7.0 cm}|p{10.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_WHITE_BALANCE_MANUAL`` - - - Manual white balance. - - - .. row 2 - - - ``V4L2_WHITE_BALANCE_AUTO`` - - - Automatic white balance adjustments. - - - .. row 3 - - - ``V4L2_WHITE_BALANCE_INCANDESCENT`` - - - White balance setting for incandescent (tungsten) lighting. It - generally cools down the colors and corresponds approximately to - 2500...3500 K color temperature range. - - - .. row 4 - - - ``V4L2_WHITE_BALANCE_FLUORESCENT`` - - - White balance preset for fluorescent lighting. It corresponds - approximately to 4000...5000 K color temperature. - - - .. row 5 - - - ``V4L2_WHITE_BALANCE_FLUORESCENT_H`` - - - With this setting the camera will compensate for fluorescent H - lighting. - - - .. row 6 - - - ``V4L2_WHITE_BALANCE_HORIZON`` - - - White balance setting for horizon daylight. It corresponds - approximately to 5000 K color temperature. - - - .. row 7 - - - ``V4L2_WHITE_BALANCE_DAYLIGHT`` - - - White balance preset for daylight (with clear sky). It corresponds - approximately to 5000...6500 K color temperature. - - - .. row 8 - - - ``V4L2_WHITE_BALANCE_FLASH`` - - - With this setting the camera will compensate for the flash light. - It slightly warms up the colors and corresponds roughly to - 5000...5500 K color temperature. - - - .. row 9 - - - ``V4L2_WHITE_BALANCE_CLOUDY`` - - - White balance preset for moderately overcast sky. This option - corresponds approximately to 6500...8000 K color temperature - range. - - - .. row 10 - - - ``V4L2_WHITE_BALANCE_SHADE`` - - - White balance preset for shade or heavily overcast sky. It - corresponds approximately to 9000...10000 K color temperature. + * - ``V4L2_WHITE_BALANCE_MANUAL`` + - Manual white balance. + * - ``V4L2_WHITE_BALANCE_AUTO`` + - Automatic white balance adjustments. + * - ``V4L2_WHITE_BALANCE_INCANDESCENT`` + - White balance setting for incandescent (tungsten) lighting. It + generally cools down the colors and corresponds approximately to + 2500...3500 K color temperature range. + * - ``V4L2_WHITE_BALANCE_FLUORESCENT`` + - White balance preset for fluorescent lighting. It corresponds + approximately to 4000...5000 K color temperature. + * - ``V4L2_WHITE_BALANCE_FLUORESCENT_H`` + - With this setting the camera will compensate for fluorescent H + lighting. + * - ``V4L2_WHITE_BALANCE_HORIZON`` + - White balance setting for horizon daylight. It corresponds + approximately to 5000 K color temperature. + * - ``V4L2_WHITE_BALANCE_DAYLIGHT`` + - White balance preset for daylight (with clear sky). It corresponds + approximately to 5000...6500 K color temperature. + * - ``V4L2_WHITE_BALANCE_FLASH`` + - With this setting the camera will compensate for the flash light. + It slightly warms up the colors and corresponds roughly to + 5000...5500 K color temperature. + * - ``V4L2_WHITE_BALANCE_CLOUDY`` + - White balance preset for moderately overcast sky. This option + corresponds approximately to 6500...8000 K color temperature + range. + * - ``V4L2_WHITE_BALANCE_SHADE`` + - White balance preset for shade or heavily overcast sky. It + corresponds approximately to 9000...10000 K color temperature. @@ -3205,7 +2303,10 @@ Camera Control IDs .. _v4l2-iso-sensitivity-auto-type: -``V4L2_CID_ISO_SENSITIVITY_AUTO (enum v4l2_iso_sensitivity_type)`` +``V4L2_CID_ISO_SENSITIVITY_AUTO`` + (enum) + +enum v4l2_iso_sensitivity_type - Enables or disables automatic ISO sensitivity adjustments. @@ -3214,24 +2315,19 @@ Camera Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_CID_ISO_SENSITIVITY_MANUAL`` - - - Manual ISO sensitivity. - - - .. row 2 - - - ``V4L2_CID_ISO_SENSITIVITY_AUTO`` - - - Automatic ISO sensitivity adjustments. + * - ``V4L2_CID_ISO_SENSITIVITY_MANUAL`` + - Manual ISO sensitivity. + * - ``V4L2_CID_ISO_SENSITIVITY_AUTO`` + - Automatic ISO sensitivity adjustments. .. _v4l2-scene-mode: -``V4L2_CID_SCENE_MODE (enum v4l2_scene_mode)`` +``V4L2_CID_SCENE_MODE`` + (enum) + +enum v4l2_scene_mode - This control allows to select scene programs as the camera automatic modes optimized for common shooting scenes. Within these modes the camera determines best exposure, aperture, focusing, light metering, @@ -3243,133 +2339,77 @@ Camera Control IDs to ``V4L2_SCENE_MODE_NONE`` to make sure the other possibly related controls are accessible. The following scene programs are defined: - +.. tabularcolumns:: |p{6.0cm}|p{11.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_SCENE_MODE_NONE`` - - - The scene mode feature is disabled. - - - .. row 2 - - - ``V4L2_SCENE_MODE_BACKLIGHT`` - - - Backlight. Compensates for dark shadows when light is coming from - behind a subject, also by automatically turning on the flash. - - - .. row 3 - - - ``V4L2_SCENE_MODE_BEACH_SNOW`` - - - Beach and snow. This mode compensates for all-white or bright - scenes, which tend to look gray and low contrast, when camera's - automatic exposure is based on an average scene brightness. To - compensate, this mode automatically slightly overexposes the - frames. The white balance may also be adjusted to compensate for - the fact that reflected snow looks bluish rather than white. - - - .. row 4 - - - ``V4L2_SCENE_MODE_CANDLELIGHT`` - - - Candle light. The camera generally raises the ISO sensitivity and - lowers the shutter speed. This mode compensates for relatively - close subject in the scene. The flash is disabled in order to - preserve the ambiance of the light. - - - .. row 5 - - - ``V4L2_SCENE_MODE_DAWN_DUSK`` - - - Dawn and dusk. Preserves the colors seen in low natural light - before dusk and after down. The camera may turn off the flash, and - automatically focus at infinity. It will usually boost saturation - and lower the shutter speed. - - - .. row 6 - - - ``V4L2_SCENE_MODE_FALL_COLORS`` - - - Fall colors. Increases saturation and adjusts white balance for - color enhancement. Pictures of autumn leaves get saturated reds - and yellows. - - - .. row 7 - - - ``V4L2_SCENE_MODE_FIREWORKS`` - - - Fireworks. Long exposure times are used to capture the expanding - burst of light from a firework. The camera may invoke image - stabilization. - - - .. row 8 - - - ``V4L2_SCENE_MODE_LANDSCAPE`` - - - Landscape. The camera may choose a small aperture to provide deep - depth of field and long exposure duration to help capture detail - in dim light conditions. The focus is fixed at infinity. Suitable - for distant and wide scenery. - - - .. row 9 - - - ``V4L2_SCENE_MODE_NIGHT`` - - - Night, also known as Night Landscape. Designed for low light - conditions, it preserves detail in the dark areas without blowing - out bright objects. The camera generally sets itself to a - medium-to-high ISO sensitivity, with a relatively long exposure - time, and turns flash off. As such, there will be increased image - noise and the possibility of blurred image. - - - .. row 10 - - - ``V4L2_SCENE_MODE_PARTY_INDOOR`` - - - Party and indoor. Designed to capture indoor scenes that are lit - by indoor background lighting as well as the flash. The camera - usually increases ISO sensitivity, and adjusts exposure for the - low light conditions. - - - .. row 11 - - - ``V4L2_SCENE_MODE_PORTRAIT`` - - - Portrait. The camera adjusts the aperture so that the depth of - field is reduced, which helps to isolate the subject against a - smooth background. Most cameras recognize the presence of faces in - the scene and focus on them. The color hue is adjusted to enhance - skin tones. The intensity of the flash is often reduced. - - - .. row 12 - - - ``V4L2_SCENE_MODE_SPORTS`` - - - Sports. Significantly increases ISO and uses a fast shutter speed - to freeze motion of rapidly-moving subjects. Increased image noise - may be seen in this mode. - - - .. row 13 - - - ``V4L2_SCENE_MODE_SUNSET`` - - - Sunset. Preserves deep hues seen in sunsets and sunrises. It bumps - up the saturation. - - - .. row 14 - - - ``V4L2_SCENE_MODE_TEXT`` - - - Text. It applies extra contrast and sharpness, it is typically a - black-and-white mode optimized for readability. Automatic focus - may be switched to close-up mode and this setting may also involve - some lens-distortion correction. + * - ``V4L2_SCENE_MODE_NONE`` + - The scene mode feature is disabled. + * - ``V4L2_SCENE_MODE_BACKLIGHT`` + - Backlight. Compensates for dark shadows when light is coming from + behind a subject, also by automatically turning on the flash. + * - ``V4L2_SCENE_MODE_BEACH_SNOW`` + - Beach and snow. This mode compensates for all-white or bright + scenes, which tend to look gray and low contrast, when camera's + automatic exposure is based on an average scene brightness. To + compensate, this mode automatically slightly overexposes the + frames. The white balance may also be adjusted to compensate for + the fact that reflected snow looks bluish rather than white. + * - ``V4L2_SCENE_MODE_CANDLELIGHT`` + - Candle light. The camera generally raises the ISO sensitivity and + lowers the shutter speed. This mode compensates for relatively + close subject in the scene. The flash is disabled in order to + preserve the ambiance of the light. + * - ``V4L2_SCENE_MODE_DAWN_DUSK`` + - Dawn and dusk. Preserves the colors seen in low natural light + before dusk and after down. The camera may turn off the flash, and + automatically focus at infinity. It will usually boost saturation + and lower the shutter speed. + * - ``V4L2_SCENE_MODE_FALL_COLORS`` + - Fall colors. Increases saturation and adjusts white balance for + color enhancement. Pictures of autumn leaves get saturated reds + and yellows. + * - ``V4L2_SCENE_MODE_FIREWORKS`` + - Fireworks. Long exposure times are used to capture the expanding + burst of light from a firework. The camera may invoke image + stabilization. + * - ``V4L2_SCENE_MODE_LANDSCAPE`` + - Landscape. The camera may choose a small aperture to provide deep + depth of field and long exposure duration to help capture detail + in dim light conditions. The focus is fixed at infinity. Suitable + for distant and wide scenery. + * - ``V4L2_SCENE_MODE_NIGHT`` + - Night, also known as Night Landscape. Designed for low light + conditions, it preserves detail in the dark areas without blowing + out bright objects. The camera generally sets itself to a + medium-to-high ISO sensitivity, with a relatively long exposure + time, and turns flash off. As such, there will be increased image + noise and the possibility of blurred image. + * - ``V4L2_SCENE_MODE_PARTY_INDOOR`` + - Party and indoor. Designed to capture indoor scenes that are lit + by indoor background lighting as well as the flash. The camera + usually increases ISO sensitivity, and adjusts exposure for the + low light conditions. + * - ``V4L2_SCENE_MODE_PORTRAIT`` + - Portrait. The camera adjusts the aperture so that the depth of + field is reduced, which helps to isolate the subject against a + smooth background. Most cameras recognize the presence of faces in + the scene and focus on them. The color hue is adjusted to enhance + skin tones. The intensity of the flash is often reduced. + * - ``V4L2_SCENE_MODE_SPORTS`` + - Sports. Significantly increases ISO and uses a fast shutter speed + to freeze motion of rapidly-moving subjects. Increased image noise + may be seen in this mode. + * - ``V4L2_SCENE_MODE_SUNSET`` + - Sunset. Preserves deep hues seen in sunsets and sunrises. It bumps + up the saturation. + * - ``V4L2_SCENE_MODE_TEXT`` + - Text. It applies extra contrast and sharpness, it is typically a + black-and-white mode optimized for readability. Automatic focus + may be switched to close-up mode and this setting may also involve + some lens-distortion correction. @@ -3393,24 +2433,12 @@ Camera Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_LOCK_EXPOSURE`` - - - Automatic exposure adjustments lock. - - - .. row 2 - - - ``V4L2_LOCK_WHITE_BALANCE`` - - - Automatic white balance adjustments lock. - - - .. row 3 - - - ``V4L2_LOCK_FOCUS`` - - - Automatic focus lock. + * - ``V4L2_LOCK_EXPOSURE`` + - Automatic exposure adjustments lock. + * - ``V4L2_LOCK_WHITE_BALANCE`` + - Automatic white balance adjustments lock. + * - ``V4L2_LOCK_FOCUS`` + - Automatic focus lock. @@ -3570,7 +2598,10 @@ FM_TX Control IDs Configures pilot tone frequency value. Unit is in Hz. The range and step are driver-specific. -``V4L2_CID_TUNE_PREEMPHASIS (enum v4l2_preemphasis)`` +``V4L2_CID_TUNE_PREEMPHASIS`` + (enum) + +enum v4l2_preemphasis - Configures the pre-emphasis value for broadcasting. A pre-emphasis filter is applied to the broadcast to accentuate the high audio frequencies. Depending on the region, a time constant of either 50 @@ -3583,24 +2614,12 @@ FM_TX Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_PREEMPHASIS_DISABLED`` - - - No pre-emphasis is applied. - - - .. row 2 - - - ``V4L2_PREEMPHASIS_50_uS`` - - - A pre-emphasis of 50 uS is used. - - - .. row 3 - - - ``V4L2_PREEMPHASIS_75_uS`` - - - A pre-emphasis of 75 uS is used. + * - ``V4L2_PREEMPHASIS_DISABLED`` + - No pre-emphasis is applied. + * - ``V4L2_PREEMPHASIS_50_uS`` + - A pre-emphasis of 50 uS is used. + * - ``V4L2_PREEMPHASIS_75_uS`` + - A pre-emphasis of 75 uS is used. @@ -3684,51 +2703,31 @@ Flash Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_FLASH_LED_MODE_NONE`` - - - Off. - - - .. row 2 - - - ``V4L2_FLASH_LED_MODE_FLASH`` - - - Flash mode. - - - .. row 3 - - - ``V4L2_FLASH_LED_MODE_TORCH`` - - - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. + * - ``V4L2_FLASH_LED_MODE_NONE`` + - Off. + * - ``V4L2_FLASH_LED_MODE_FLASH`` + - Flash mode. + * - ``V4L2_FLASH_LED_MODE_TORCH`` + - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. ``V4L2_CID_FLASH_STROBE_SOURCE (menu)`` Defines the source of the flash LED strobe. - +.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_FLASH_STROBE_SOURCE_SOFTWARE`` - - - The flash strobe is triggered by using the - V4L2_CID_FLASH_STROBE control. - - - .. row 2 - - - ``V4L2_FLASH_STROBE_SOURCE_EXTERNAL`` - - - The flash strobe is triggered by an external source. Typically - this is a sensor, which makes it possible to synchronises the - flash strobe start to exposure start. + * - ``V4L2_FLASH_STROBE_SOURCE_SOFTWARE`` + - The flash strobe is triggered by using the + V4L2_CID_FLASH_STROBE control. + * - ``V4L2_FLASH_STROBE_SOURCE_EXTERNAL`` + - The flash strobe is triggered by an external source. Typically + this is a sensor, which makes it possible to synchronises the + flash strobe start to exposure start. @@ -3775,75 +2774,39 @@ Flash Control IDs an effect is chip dependent. Reading the faults resets the control and returns the chip to a usable state if possible. - +.. tabularcolumns:: |p{8.0cm}|p{9.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_FLASH_FAULT_OVER_VOLTAGE`` - - - Flash controller voltage to the flash LED has exceeded the limit - specific to the flash controller. - - - .. row 2 - - - ``V4L2_FLASH_FAULT_TIMEOUT`` - - - The flash strobe was still on when the timeout set by the user --- - V4L2_CID_FLASH_TIMEOUT control --- has expired. Not all flash - controllers may set this in all such conditions. - - - .. row 3 - - - ``V4L2_FLASH_FAULT_OVER_TEMPERATURE`` - - - The flash controller has overheated. - - - .. row 4 - - - ``V4L2_FLASH_FAULT_SHORT_CIRCUIT`` - - - The short circuit protection of the flash controller has been - triggered. - - - .. row 5 - - - ``V4L2_FLASH_FAULT_OVER_CURRENT`` - - - Current in the LED power supply has exceeded the limit specific to - the flash controller. - - - .. row 6 - - - ``V4L2_FLASH_FAULT_INDICATOR`` - - - The flash controller has detected a short or open circuit - condition on the indicator LED. - - - .. row 7 - - - ``V4L2_FLASH_FAULT_UNDER_VOLTAGE`` - - - Flash controller voltage to the flash LED has been below the - minimum limit specific to the flash controller. - - - .. row 8 - - - ``V4L2_FLASH_FAULT_INPUT_VOLTAGE`` - - - The input voltage of the flash controller is below the limit under - which strobing the flash at full current will not be possible.The - condition persists until this flag is no longer set. - - - .. row 9 - - - ``V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE`` - - - The temperature of the LED has exceeded its allowed upper limit. + * - ``V4L2_FLASH_FAULT_OVER_VOLTAGE`` + - Flash controller voltage to the flash LED has exceeded the limit + specific to the flash controller. + * - ``V4L2_FLASH_FAULT_TIMEOUT`` + - The flash strobe was still on when the timeout set by the user --- + V4L2_CID_FLASH_TIMEOUT control --- has expired. Not all flash + controllers may set this in all such conditions. + * - ``V4L2_FLASH_FAULT_OVER_TEMPERATURE`` + - The flash controller has overheated. + * - ``V4L2_FLASH_FAULT_SHORT_CIRCUIT`` + - The short circuit protection of the flash controller has been + triggered. + * - ``V4L2_FLASH_FAULT_OVER_CURRENT`` + - Current in the LED power supply has exceeded the limit specific to + the flash controller. + * - ``V4L2_FLASH_FAULT_INDICATOR`` + - The flash controller has detected a short or open circuit + condition on the indicator LED. + * - ``V4L2_FLASH_FAULT_UNDER_VOLTAGE`` + - Flash controller voltage to the flash LED has been below the + minimum limit specific to the flash controller. + * - ``V4L2_FLASH_FAULT_INPUT_VOLTAGE`` + - The input voltage of the flash controller is below the limit under + which strobing the flash at full current will not be possible.The + condition persists until this flag is no longer set. + * - ``V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE`` + - The temperature of the LED has exceeded its allowed upper limit. @@ -3886,48 +2849,24 @@ JPEG Control IDs how Cb and Cr components are downsampled after coverting an input image from RGB to Y'CbCr color space. - +.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_JPEG_CHROMA_SUBSAMPLING_444`` - - - No chroma subsampling, each pixel has Y, Cr and Cb values. - - - .. row 2 - - - ``V4L2_JPEG_CHROMA_SUBSAMPLING_422`` - - - Horizontally subsample Cr, Cb components by a factor of 2. - - - .. row 3 - - - ``V4L2_JPEG_CHROMA_SUBSAMPLING_420`` - - - Subsample Cr, Cb components horizontally and vertically by 2. - - - .. row 4 - - - ``V4L2_JPEG_CHROMA_SUBSAMPLING_411`` - - - Horizontally subsample Cr, Cb components by a factor of 4. - - - .. row 5 - - - ``V4L2_JPEG_CHROMA_SUBSAMPLING_410`` - - - Subsample Cr, Cb components horizontally by 4 and vertically by 2. - - - .. row 6 - - - ``V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY`` - - - Use only luminance component. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_444`` + - No chroma subsampling, each pixel has Y, Cr and Cb values. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_422`` + - Horizontally subsample Cr, Cb components by a factor of 2. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_420`` + - Subsample Cr, Cb components horizontally and vertically by 2. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_411`` + - Horizontally subsample Cr, Cb components by a factor of 4. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_410`` + - Subsample Cr, Cb components horizontally by 4 and vertically by 2. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY`` + - Use only luminance component. @@ -3969,36 +2908,16 @@ JPEG Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_JPEG_ACTIVE_MARKER_APP0`` - - - Application data segment APP\ :sub:`0`. - - - .. row 2 - - - ``V4L2_JPEG_ACTIVE_MARKER_APP1`` - - - Application data segment APP\ :sub:`1`. - - - .. row 3 - - - ``V4L2_JPEG_ACTIVE_MARKER_COM`` - - - Comment segment. - - - .. row 4 - - - ``V4L2_JPEG_ACTIVE_MARKER_DQT`` - - - Quantization tables segment. - - - .. row 5 - - - ``V4L2_JPEG_ACTIVE_MARKER_DHT`` - - - Huffman tables segment. + * - ``V4L2_JPEG_ACTIVE_MARKER_APP0`` + - Application data segment APP\ :sub:`0`. + * - ``V4L2_JPEG_ACTIVE_MARKER_APP1`` + - Application data segment APP\ :sub:`1`. + * - ``V4L2_JPEG_ACTIVE_MARKER_COM`` + - Comment segment. + * - ``V4L2_JPEG_ACTIVE_MARKER_DQT`` + - Quantization tables segment. + * - ``V4L2_JPEG_ACTIVE_MARKER_DHT`` + - Huffman tables segment. @@ -4162,13 +3081,19 @@ Digital Video Control IDs EDIDs, then the bit for that pad will be 0. This read-only control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. -``V4L2_CID_DV_TX_MODE (enum v4l2_dv_tx_mode)`` +``V4L2_CID_DV_TX_MODE`` + (enum) + +enum v4l2_dv_tx_mode - HDMI transmitters can transmit in DVI-D mode (just video) or in HDMI mode (video + audio + auxiliary data). This control selects which mode to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI. This control is applicable to HDMI connectors. -``V4L2_CID_DV_TX_RGB_RANGE (enum v4l2_dv_rgb_range)`` +``V4L2_CID_DV_TX_RGB_RANGE`` + (enum) + +enum v4l2_dv_rgb_range - Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO follows the RGB quantization range specified in the standard for the video interface (ie. :ref:`cea861` for HDMI). @@ -4180,7 +3105,10 @@ Digital Video Control IDs the number of bits per component. This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. -``V4L2_CID_DV_TX_IT_CONTENT_TYPE (enum v4l2_dv_it_content_type)`` +``V4L2_CID_DV_TX_IT_CONTENT_TYPE`` + (enum) + +enum v4l2_dv_it_content_type - Configures the IT Content Type of the transmitted video. This information is sent over HDMI and DisplayPort connectors as part of the AVI InfoFrame. The term 'IT Content' is used for content that @@ -4188,46 +3116,26 @@ Digital Video Control IDs or an analog source. The enum v4l2_dv_it_content_type defines the possible content types: - +.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_DV_IT_CONTENT_TYPE_GRAPHICS`` - - - Graphics content. Pixel data should be passed unfiltered and - without analog reconstruction. - - - .. row 2 - - - ``V4L2_DV_IT_CONTENT_TYPE_PHOTO`` - - - Photo content. The content is derived from digital still pictures. - The content should be passed through with minimal scaling and - picture enhancements. - - - .. row 3 - - - ``V4L2_DV_IT_CONTENT_TYPE_CINEMA`` - - - Cinema content. - - - .. row 4 - - - ``V4L2_DV_IT_CONTENT_TYPE_GAME`` - - - Game content. Audio and video latency should be minimized. - - - .. row 5 - - - ``V4L2_DV_IT_CONTENT_TYPE_NO_ITC`` - - - No IT Content information is available and the ITC bit in the AVI - InfoFrame is set to 0. + * - ``V4L2_DV_IT_CONTENT_TYPE_GRAPHICS`` + - Graphics content. Pixel data should be passed unfiltered and + without analog reconstruction. + * - ``V4L2_DV_IT_CONTENT_TYPE_PHOTO`` + - Photo content. The content is derived from digital still pictures. + The content should be passed through with minimal scaling and + picture enhancements. + * - ``V4L2_DV_IT_CONTENT_TYPE_CINEMA`` + - Cinema content. + * - ``V4L2_DV_IT_CONTENT_TYPE_GAME`` + - Game content. Audio and video latency should be minimized. + * - ``V4L2_DV_IT_CONTENT_TYPE_NO_ITC`` + - No IT Content information is available and the ITC bit in the AVI + InfoFrame is set to 0. @@ -4241,7 +3149,10 @@ Digital Video Control IDs will be 0. This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. -``V4L2_CID_DV_RX_RGB_RANGE (enum v4l2_dv_rgb_range)`` +``V4L2_CID_DV_RX_RGB_RANGE`` + (enum) + +enum v4l2_dv_rgb_range - Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO follows the RGB quantization range specified in the standard for the video interface (ie. :ref:`cea861` for HDMI). @@ -4253,7 +3164,10 @@ Digital Video Control IDs the number of bits per component. This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. -``V4L2_CID_DV_RX_IT_CONTENT_TYPE (enum v4l2_dv_it_content_type)`` +``V4L2_CID_DV_RX_IT_CONTENT_TYPE`` + (enum) + +enum v4l2_dv_it_content_type - Reads the IT Content Type of the received video. This information is sent over HDMI and DisplayPort connectors as part of the AVI InfoFrame. The term 'IT Content' is used for content that originates @@ -4325,7 +3239,10 @@ FM_RX Control IDs broadcasts speech. If the transmitter doesn't make this distinction, then it will be set. -``V4L2_CID_TUNE_DEEMPHASIS (enum v4l2_deemphasis)`` +``V4L2_CID_TUNE_DEEMPHASIS`` + (enum) + +enum v4l2_deemphasis - Configures the de-emphasis value for reception. A de-emphasis filter is applied to the broadcast to accentuate the high audio frequencies. Depending on the region, a time constant of either 50 @@ -4338,24 +3255,12 @@ FM_RX Control IDs :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_DEEMPHASIS_DISABLED`` - - - No de-emphasis is applied. - - - .. row 2 - - - ``V4L2_DEEMPHASIS_50_uS`` - - - A de-emphasis of 50 uS is used. - - - .. row 3 - - - ``V4L2_DEEMPHASIS_75_uS`` - - - A de-emphasis of 75 uS is used. + * - ``V4L2_DEEMPHASIS_DISABLED`` + - No de-emphasis is applied. + * - ``V4L2_DEEMPHASIS_50_uS`` + - A de-emphasis of 50 uS is used. + * - ``V4L2_DEEMPHASIS_75_uS`` + - A de-emphasis of 75 uS is used. @@ -4382,43 +3287,27 @@ Detect Control IDs ``V4L2_CID_DETECT_MD_MODE (menu)`` Sets the motion detection mode. - +.. tabularcolumns:: |p{7.5cm}|p{10.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - - ``V4L2_DETECT_MD_MODE_DISABLED`` - - - Disable motion detection. - - - .. row 2 - - - ``V4L2_DETECT_MD_MODE_GLOBAL`` - - - Use a single motion detection threshold. - - - .. row 3 - - - ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID`` - - - The image is divided into a grid, each cell with its own motion - detection threshold. These thresholds are set through the - ``V4L2_CID_DETECT_MD_THRESHOLD_GRID`` matrix control. - - - .. row 4 - - - ``V4L2_DETECT_MD_MODE_REGION_GRID`` - - - The image is divided into a grid, each cell with its own region - value that specifies which per-region motion detection thresholds - should be used. Each region has its own thresholds. How these - per-region thresholds are set up is driver-specific. The region - values for the grid are set through the - ``V4L2_CID_DETECT_MD_REGION_GRID`` matrix control. + * - ``V4L2_DETECT_MD_MODE_DISABLED`` + - Disable motion detection. + * - ``V4L2_DETECT_MD_MODE_GLOBAL`` + - Use a single motion detection threshold. + * - ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID`` + - The image is divided into a grid, each cell with its own motion + detection threshold. These thresholds are set through the + ``V4L2_CID_DETECT_MD_THRESHOLD_GRID`` matrix control. + * - ``V4L2_DETECT_MD_MODE_REGION_GRID`` + - The image is divided into a grid, each cell with its own region + value that specifies which per-region motion detection thresholds + should be used. Each region has its own thresholds. How these + per-region thresholds are set up is driver-specific. The region + values for the grid are set through the + ``V4L2_CID_DETECT_MD_REGION_GRID`` matrix control. |