diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
8 files changed, 63 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt index a135504c7d57..cac24ee10b72 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt @@ -32,7 +32,7 @@ Example: compatible = "st,stm32h743-rcc", "st,stm32-rcc"; reg = <0x58024400 0x400>; #reset-cells = <1>; - #clock-cells = <2>; + #clock-cells = <1>; clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>; st,syscfg = <&pwrcfg>; diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt index 12c5ef26ec73..fdc40e354a64 100644 --- a/Documentation/devicetree/bindings/leds/ams,as3645a.txt +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt @@ -15,11 +15,14 @@ Required properties compatible : Must be "ams,as3645a". reg : The I2C address of the device. Typically 0x30. +#address-cells : 1 +#size-cells : 0 -Required properties of the "flash" child node -============================================= +Required properties of the flash child node (0) +=============================================== +reg: 0 flash-timeout-us: Flash timeout in microseconds. The value must be in the range [100000, 850000] and divisible by 50000. flash-max-microamp: Maximum flash current in microamperes. Has to be @@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The and divisible by 50000. -Optional properties of the "flash" child node -============================================= +Optional properties of the flash child node +=========================================== label : The label of the flash LED. -Required properties of the "indicator" child node -================================================= +Required properties of the indicator child node (1) +=================================================== +reg: 1 led-max-microamp: Maximum indicator current. The allowed values are 2500, 5000, 7500 and 10000. -Optional properties of the "indicator" child node -================================================= +Optional properties of the indicator child node +=============================================== label : The label of the indicator LED. @@ -55,16 +59,20 @@ Example ======= as3645a@30 { + #address-cells: 1 + #size-cells: 0 reg = <0x30>; compatible = "ams,as3645a"; - flash { + flash@0 { + reg = <0x0>; flash-timeout-us = <150000>; flash-max-microamp = <320000>; led-max-microamp = <60000>; ams,input-max-microamp = <1750000>; label = "as3645a:flash"; }; - indicator { + indicator@1 { + reg = <0x1>; led-max-microamp = <10000>; label = "as3645a:indicator"; }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 7e2dad08a12e..1814fa13f6ab 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -21,8 +21,9 @@ Required properties: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) - GOP clock (for both armada-375-pp2 and armada-7k-pp2) - MG clock (only for armada-7k-pp2) -- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and - "mg_clk" (the latter only for armada-7k-pp2). + - AXI clock (only for armada-7k-pp2) +- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk" + and "axi_clk" (the 2 latter only for armada-7k-pp2). The ethernet ports are represented by subnodes. At least one port is required. @@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2: cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; - clock-names = "pp_clk", "gop_clk", "gp_clk"; + clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, + <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>; + clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk"; eth0: eth0 { interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 6af8eed1adeb..9c16ee2965a2 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -4,6 +4,7 @@ The device node has following properties. Required properties: - compatible: should be "rockchip,<name>-gamc" + "rockchip,rk3128-gmac": found on RK312x SoCs "rockchip,rk3228-gmac": found on RK322x SoCs "rockchip,rk3288-gmac": found on RK3288 SoCs "rockchip,rk3328-gmac": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt new file mode 100644 index 000000000000..830069b1c37c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt @@ -0,0 +1,28 @@ +Binding for the Synopsys HSDK reset controller + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,hsdk-reset". +- reg: should always contain 2 pairs address - length: first for reset + configuration register and second for corresponding SW reset and status bits + register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset@880 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8A0 0x4>, <0xFF0 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset HSDK_V1_ETH_RESET>; + .... + }; + +The index could be found in <dt-bindings/reset/snps,hsdk-reset.h> diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt index 3eca6de6369d..a65d7b71e81a 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt @@ -8,6 +8,12 @@ Required properties: the firmware event log - linux,sml-size : size of the memory allocated for the firmware event log +Optional properties: + +- powered-while-suspended: present when the TPM is left powered on between + suspend and resume (makes the suspend/resume + callbacks do nothing). + Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C) ---------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 4fc96946f81d..cf504d0380ae 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -41,6 +41,8 @@ Required properties: - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. + - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. + - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 1ea1fd4232ab..1afd298eddd7 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -3,8 +3,8 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order. This isn't an exhaustive list, but you should add new prefixes to it before using them to avoid name-space collisions. -abcn Abracon Corporation abilis Abilis Systems +abracon Abracon Corporation actions Actions Semiconductor Co., Ltd. active-semi Active-Semi International Inc ad Avionic Design GmbH |