diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
5 files changed, 35 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt index 6c396f17c91a..816b244a221e 100644 --- a/Documentation/devicetree/bindings/pci/altera-pcie.txt +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -1,11 +1,13 @@ * Altera PCIe controller Required properties: -- compatible : should contain "altr,pcie-root-port-1.0" +- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0" - reg: a list of physical base address and length for TXS and CRA. + For "altr,pcie-root-port-2.0", additional HIP base address and length. - reg-names: must include the following entries: "Txs": TX slave port region "Cra": Control register access region + "Hip": Hard IP region (if "altr,pcie-root-port-2.0") - interrupts: specifies the interrupt source of the parent interrupt controller. The format of the interrupt specifier depends on the parent interrupt controller. diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index d514c1f2365f..a7f5f5afa0e6 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -9,6 +9,7 @@ Required properties: - "fsl,imx6sx-pcie", - "fsl,imx6qp-pcie" - "fsl,imx7d-pcie" + - "fsl,imx8mq-pcie" - reg: base address and length of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie: PCIE_PHY power domains - power-domain-names: Must be "pcie", "pcie_phy" -Additional required properties for imx7d-pcie: +Additional required properties for imx7d-pcie and imx8mq-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain - resets: Must contain phandles to PCIe-related reset lines exposed by SRC IP block @@ -53,6 +54,11 @@ Additional required properties for imx7d-pcie: - "pciephy" - "apps" - "turnoff" +- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node. + +Additional required properties for imx8mq-pcie: +- clock-names: Must include the following additional entries: + - "pcie_aux" Example: @@ -79,3 +85,13 @@ Example: clocks = <&clks 144>, <&clks 206>, <&clks 189>; clock-names = "pcie", "pcie_bus", "pcie_phy"; }; + +* Freescale i.MX7d PCIe PHY + +This is the PHY associated with the IMX7d PCIe controller. It's used by the +PCI-e controller via the fsl,imx7d-pcie-phy phandle. + +Required properties: +- compatible: + - "fsl,imx7d-pcie-phy" +- reg: base address and length of the PCIe PHY controller diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 9b2b8d66d1f4..e20ceaab9b38 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -13,6 +13,7 @@ information. Required properties: - compatible: should contain the platform identifier such as: + RC mode: "fsl,ls1021a-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" "fsl,ls2088a-pcie" @@ -20,6 +21,8 @@ Required properties: "fsl,ls1046a-pcie" "fsl,ls1043a-pcie" "fsl,ls1012a-pcie" + EP mode: + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index 976ef7bfff93..6904882a0e94 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -3,6 +3,7 @@ Required properties: compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; "renesas,pcie-r8a7744" for the R8A7744 SoC; + "renesas,pcie-r8a774c0" for the R8A774C0 SoC; "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7790" for the R8A7790 SoC; "renesas,pcie-r8a7791" for the R8A7791 SoC; @@ -13,7 +14,8 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; "renesas,pcie-r8a77990" for the R8A77990 SoC; "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device. + "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or + RZ/G2 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt index 452fe48c4fdd..d5cbfe6b0d89 100644 --- a/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -1,14 +1,21 @@ TI PCI Controllers PCIe DesignWare Controller - - compatible: Should be "ti,dra7-pcie" for RC - Should be "ti,dra7-pcie-ep" for EP + - compatible: Should be "ti,dra7-pcie" for RC (deprecated) + Should be "ti,dra7-pcie-ep" for EP (deprecated) + Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode + Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode + Should be "ti,dra726-pcie-rc" for dra72x in RC mode + Should be "ti,dra726-pcie-ep" for dra72x in EP mode - phys : list of PHY specifiers (used by generic PHY framework) - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the number of PHYs as specified in *phys* property. - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>", where <X> is the instance number of the pcie from the HW spec. - num-lanes as specified in ../designware-pcie.txt + - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control + module and the register offset to specify lane + selection. HOST MODE ========= |