1 files changed, 0 insertions, 132 deletions
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
deleted file mode 100644
index 5bfcc0b4d6b9..000000000000
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-NVIDIA Tegra xHCI controller
-============================
-
-The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by
-the Tegra XUSB pad controller.
-
-Required properties:
---------------------
-- compatible: Must be:
-  - Tegra124: "nvidia,tegra124-xusb"
-  - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
-  - Tegra210: "nvidia,tegra210-xusb"
-  - Tegra186: "nvidia,tegra186-xusb"
-- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
-  registers and XUSB IPFS registers.
-- reg-names: Must contain the following entries:
-  - "hcd"
-  - "fpci"
-  - "ipfs"
-- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-   - xusb_host
-   - xusb_host_src
-   - xusb_falcon_src
-   - xusb_ss
-   - xusb_ss_src
-   - xusb_ss_div2
-   - xusb_hs_src
-   - xusb_fs_src
-   - pll_u_480m
-   - clk_m
-   - pll_e
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - xusb_host
-  - xusb_ss
-  - xusb_src
-  Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src.
-- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to
-  configure the USB pads used by the XHCI controller
-
-For Tegra124 and Tegra132:
-- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
-- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
-- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
-- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V.
-
-For Tegra210:
-- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
-- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
-- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
-
-For Tegra210 and Tegra186:
-- power-domains: A list of PM domain specifiers that reference each power-domain
-  used by the xHCI controller. This list must comprise of a specifier for the
-  XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
-  ../arm/tegra/nvidia,tegra20-pmc.txt for details.
-- power-domain-names: A list of names that represent each of the specifiers in
-  the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
-  represent the power-domains XUSBA and XUSBC, respectively. See
-  ../power/power_domain.txt for details.
-
-Optional properties:
---------------------
-- phys: Must contain an entry for each entry in phy-names.
-  See ../phy/phy-bindings.txt for details.
-- phy-names: Should include an entry for each PHY used by the controller. The
-  following PHYs are available:
-  - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
-  - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
-  - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
-              usb3-3
-  - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2
-
-Example:
---------
-
-	usb@0,70090000 {
-		compatible = "nvidia,tegra124-xusb";
-		reg = <0x0 0x70090000 0x0 0x8000>,
-		      <0x0 0x70098000 0x0 0x1000>,
-		      <0x0 0x70099000 0x0 0x1000>;
-		reg-names = "hcd", "fpci", "ipfs";
-
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
-			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
-			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
-			 <&tegra_car TEGRA124_CLK_CLK_M>,
-			 <&tegra_car TEGRA124_CLK_PLL_E>;
-		clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
-			      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
-			      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
-			      "clk_m", "pll_e";
-		resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
-		reset-names = "xusb_host", "xusb_ss", "xusb_src";
-
-		nvidia,xusb-padctl = <&padctl>;
-
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
-		phy-names = "usb2-1", "usb2-2", "usb3-0";
-
-		avddio-pex-supply = <&vdd_1v05_run>;
-		dvddio-pex-supply = <&vdd_1v05_run>;
-		avdd-usb-supply = <&vdd_3v3_lp0>;
-		avdd-pll-utmip-supply = <&vddio_1v8>;
-		avdd-pll-erefe-supply = <&avdd_1v05_run>;
-		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
-		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
-		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
-	};