diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
35 files changed, 0 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index 2fefa1a44afd..ab6ef085389a 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -26,5 +26,4 @@ amac0: ethernet@18022000 { <0x18110000 0x1000>; reg-names = "amac_base", "idm_base"; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt index 022946caa7e2..b46da51915c4 100644 --- a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt +++ b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt @@ -20,5 +20,4 @@ gmac0: ethernet@18022000 { <0x18110000 0x1000>; reg-names = "gmac_base", "idm_base"; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index 01fa2d4188d4..9c5e663fa1af 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -29,7 +29,6 @@ Example: Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: &usb_host1_ehci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 9e331777c203..78138333ff7a 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -56,7 +56,6 @@ m_can1: can@020e8000 { <&clks IMX6SX_CLK_CANFD>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; - status = "disabled"; }; Board dts: diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index 0ab8b39d0b30..fd23904ac68e 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -24,7 +24,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: pinctrl-0 = <&pinctrl_spi_ksz>; cs-gpios = <&pioC 25 0>; id = <1>; - status = "okay"; ksz9477: ksz9477@0 { compatible = "microchip,ksz9477"; @@ -34,7 +33,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: spi-cpha; spi-cpol; - status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 04f2965a4467..4448d063ddf6 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -27,7 +27,6 @@ Example: I2C managed mode: master: masterdevice@X { - status = "okay"; fixed-link { /* RMII fixed link to LAN9303 */ speed = <100>; @@ -38,7 +37,6 @@ I2C managed mode: switch: switch@a { compatible = "smsc,lan9303-i2c"; reg = <0xa>; - status = "okay"; reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; reset-duration = <200>; @@ -67,7 +65,6 @@ I2C managed mode: MDIO managed mode: master: masterdevice@X { - status = "okay"; phy-handle = <&switch>; mdio { diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt index c1ce1680246f..72e7aaf7242e 100644 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ b/Documentation/devicetree/bindings/net/ftgmac100.txt @@ -30,6 +30,5 @@ Example: compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; - status = "okay"; use-ncsi; }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index ae4234ca4ee4..bedcfd5a52cd 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -41,7 +41,6 @@ ethernet@70000 { interrupts = <8>; clocks = <&gate_clk 4>; tx-csum-limit = <9800> - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; buffer-manager = <&bm>; diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt index 9be1059ff03f..3d27c68613a6 100644 --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt @@ -44,7 +44,6 @@ Example for SDIO device follows (calibration data is also available in below example). &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; @@ -70,7 +69,6 @@ below example). Example for USB device: &usb_host1_ohci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt index c1b1d7c3bde1..07b31050dbe5 100644 --- a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt +++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt @@ -31,7 +31,6 @@ bm: bm@c8000 { reg = <0xc8000 0xac>; clocks = <&gateclk 13>; internal-mem = <&bm_bppi>; - status = "okay"; pool2,capacity = <4096>; pool1,pkt-size = <512>; }; @@ -45,5 +44,4 @@ bm_bppi: bm-bppi { #address-cells = <1>; #size-cells = <1>; clocks = <&gateclk 13>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 6b4956beff8c..f85a62ca9edd 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -52,12 +52,10 @@ ethernet@f0000 { <0xc5000 0x100>; clocks = <&gateclk 3>, <&gateclk 19>; clock-names = "pp_clk", "gop_clk"; - status = "okay"; eth0: eth0@c4000 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; - status = "okay"; phy = <&phy0>; phy-mode = "gmii"; }; @@ -65,7 +63,6 @@ ethernet@f0000 { eth1: eth1@c5000 { interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; - status = "okay"; phy = <&phy3>; phy-mode = "gmii"; }; diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt index 0703ad3f3c1e..354dd9896bb5 100644 --- a/Documentation/devicetree/bindings/net/meson-dwmac.txt +++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt @@ -66,5 +66,4 @@ Example for GXBB: <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; phy-mode = "rgmii"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index c35b5b428a7f..42a248301615 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -69,7 +69,6 @@ Examples: }; }; ethernet@70000 { - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt index 1dc3bc75539d..44dff53d4dda 100644 --- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt +++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt @@ -33,7 +33,6 @@ Example (for NXP i.MX28 with pin control stuff for GPIO irq): compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>; - status = "okay"; enc28j60: ethernet@0 { compatible = "microchip,enc28j60"; diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt index 76df9173825a..c9b35251bb20 100644 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -25,7 +25,6 @@ Optional I2C-based chip specific properties: Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): &uart5 { - status = "okay"; nfcmrvluart: nfcmrvluart@5 { compatible = "marvell,nfc-uart"; @@ -41,7 +40,6 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): &i2c1 { - status = "okay"; clock-frequency = <400000>; nfcmrvli2c0: i2c@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index 5b6cd9b3f628..92486733df71 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): &i2c2 { - status = "okay"; npc100: npc100@29 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt index 1aea822d4530..122460e42e3c 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt @@ -15,7 +15,6 @@ Example (for ARM-based BeagleBone with PN532 on I2C2): &i2c2 { - status = "okay"; pn532: pn532@24 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt index dab69f36167c..538a86f7b2b0 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with PN544 on I2C2): &i2c2 { - status = "okay"; pn544: pn544@28 { diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt index fb1e75facf1b..ed5b3eaadb39 100644 --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt @@ -12,7 +12,6 @@ Required properties: Example: &hsi2c_4 { - status = "okay"; s3fwrn5@27 { compatible = "samsung,s3fwrn5-i2c"; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt index 263732e8879f..b46d473be425 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): &i2c2 { - status = "okay"; st21nfcb: st21nfcb@8 { diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt index 711ca85a363d..54ce8e7ac681 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt @@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): &mcspi4 { - status = "okay"; st21nfcb: st21nfcb@0 { diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt index 7bb2e213d6f9..5ee9440fa9ad 100644 --- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt +++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): &i2c2 { - status = "okay"; st21nfca: st21nfca@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt index ea3178bc9ddd..08a202e00d47 100644 --- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt +++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt @@ -35,12 +35,10 @@ spi@9840000 { #address-cells = <1>; #size-cells = <0>; cs-gpios = <&pio0 4>; - status = "okay"; st95hf@0{ reg = <0>; compatible = "st,st95hf"; - status = "okay"; spi-max-frequency = <1000000>; enable-gpio = <&pio4 0>; interrupt-parent = <&pio0>; diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 60c833d62181..5ca9362ef127 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -23,7 +23,6 @@ Optional SoC Specific Properties: Example (for ARM-based BeagleBone with TRF7970A on SPI1): &spi1 { - status = "okay"; nfc@0 { compatible = "ti,trf7970a"; @@ -41,6 +40,5 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): irq-status-read-quirk; en2-rf-quirk; clock-frequency = <27120000>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt index df0534e2eda1..d7117a22fd87 100644 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt @@ -35,5 +35,4 @@ etha: ethernet@40400000 { /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 6d9efb2eb9a5..3987846b3fd3 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -41,7 +41,6 @@ ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; - status = "okay"; qca7000: ethernet@0 { compatible = "qca,qca7000"; @@ -78,7 +77,6 @@ auart0: serial@8006a000 { reg = <0x8006a000 0x2000>; pinctrl-names = "default"; pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; qca7000: ethernet { compatible = "qca,qca7000"; diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 8f427550720a..f4766855483e 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -70,5 +70,4 @@ gmac: ethernet@ff290000 { tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt index 974edd5c85cc..8b7c719b0bb9 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt @@ -15,7 +15,6 @@ smsc phy with disabled energy detect mode on an am335x based board. pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethernetphy0: ethernet-phy@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index 2e68a3cd8513..b30d04b54ee9 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -40,7 +40,6 @@ gmii_to_sgmii_converter: phy@0x100000240 { gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; - status = "disabled"; reg = <0xff700000 0x2000>; interrupts = <0 115 4>; interrupt-names = "macirq"; diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index d05c1e1fd9b6..062c5174add3 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -34,7 +34,6 @@ Example: ethernet0: dwmac@9630000 { device_type = "network"; - status = "disabled"; compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; reg = <0x9630000 0x8000>; reg-names = "stmmaceth"; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt index c35afb7e956a..489dbcb66c5a 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt @@ -18,7 +18,6 @@ Example: ethernet@40028000 { compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - status = "disabled"; reg = <0x40028000 0x8000>; reg-names = "stmmaceth"; interrupts = <0 61 0>, <0 62 0>; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index 590f622188de..b2bd4704f859 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -29,7 +29,6 @@ mmc3: mmc@01c12000 { vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; - status = "okay"; brcmf: wifi@1 { reg = <1>; diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt index 19331bb4ff6e..6830c4786f8a 100644 --- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt +++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt @@ -21,7 +21,6 @@ Example: mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; - status = "okay"; esp8089: sdio_wifi@1 { compatible = "esp,esp8089"; diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 0854451ff91d..59de8646862d 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -48,7 +48,6 @@ IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured so that firmware can wakeup host using this device side pin. &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt index 7b2cbb14113e..f42f6b0f1bc7 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt @@ -31,7 +31,6 @@ clock, new bindings (for parsing the clock nodes) have to be added. Example: &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; |