diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/dsa.txt | 38 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/ethernet.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/fixed-link.txt | 14 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/keystone-netcp.txt | 6 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt | 27 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt (renamed from Documentation/devicetree/bindings/net/nfc/st-nci.txt) | 0 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt | 31 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt | 75 |
8 files changed, 187 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index f0b4cd72411d..04e6bef3ac3f 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -44,9 +44,10 @@ Note that a port labelled "dsa" will imply checking for the uplink phandle described below. Optionnal property: -- link : Should be a phandle to another switch's DSA port. +- link : Should be a list of phandles to another switch's DSA port. This property is only used when switches are being - chained/cascaded together. + chained/cascaded together. This port is used as outgoing port + towards the phandle port, which can be more than one hop away. - phy-handle : Phandle to a PHY on an external MDIO bus, not the switch internal one. See @@ -58,6 +59,10 @@ Optionnal property: Documentation/devicetree/bindings/net/ethernet.txt for details. +- mii-bus : Should be a phandle to a valid MDIO bus device node. + This mii-bus will be used in preference to the + global dsa,mii-bus defined above, for this switch. + Optional subnodes: - fixed-link : Fixed-link subnode describing a link to a non-MDIO managed entity. See @@ -96,10 +101,11 @@ Example: label = "cpu"; }; - switch0uplink: port@6 { + switch0port6: port@6 { reg = <6>; label = "dsa"; - link = <&switch1uplink>; + link = <&switch1port0 + &switch2port0>; }; }; @@ -107,11 +113,31 @@ Example: #address-cells = <1>; #size-cells = <0>; reg = <17 1>; /* MDIO address 17, switch 1 in tree */ + mii-bus = <&mii_bus1>; + + switch1port0: port@0 { + reg = <0>; + label = "dsa"; + link = <&switch0port6>; + }; + switch1port1: port@1 { + reg = <1>; + label = "dsa"; + link = <&switch2port1>; + }; + }; + + switch@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <18 2>; /* MDIO address 18, switch 2 in tree */ + mii-bus = <&mii_bus1>; - switch1uplink: port@0 { + switch2port0: port@0 { reg = <0>; label = "dsa"; - link = <&switch0uplink>; + link = <&switch1port1 + &switch0port6>; }; }; }; diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 41b3f3f864e8..5d88f37480b6 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -25,7 +25,11 @@ The following properties are common to the Ethernet controllers: flow control thresholds. - tx-fifo-depth: the size of the controller's transmit fifo in bytes. This is used for components that can have configurable fifo sizes. +- managed: string, specifies the PHY management type. Supported values are: + "auto", "in-band-status". "auto" is the default, it usess MDIO for + management if fixed-link is not specified. Child nodes of the Ethernet controller are typically the individual PHY devices connected via the MDIO bus (sometimes the MDIO bus controller is separate). They are described in the phy.txt file in this same directory. +For non-MDIO PHY management see fixed-link.txt. diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt index 82bf7e0f47b6..ec5d889fe3d8 100644 --- a/Documentation/devicetree/bindings/net/fixed-link.txt +++ b/Documentation/devicetree/bindings/net/fixed-link.txt @@ -17,6 +17,8 @@ properties: enabled. * 'asym-pause' (boolean, optional), to indicate that asym_pause should be enabled. +* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read + to determine if the link is up. Old, deprecated 'fixed-link' binding: @@ -30,7 +32,7 @@ Old, deprecated 'fixed-link' binding: - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for asymmetric pause -Example: +Examples: ethernet@0 { ... @@ -40,3 +42,13 @@ ethernet@0 { }; ... }; + +ethernet@1 { + ... + fixed-link { + speed = <1000>; + pause; + link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt index d0e6fa38f335..b30ab6b5cbfa 100644 --- a/Documentation/devicetree/bindings/net/keystone-netcp.txt +++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt @@ -130,7 +130,11 @@ Required properties: Optional properties: - efuse-mac: If this is 1, then the MAC address for the interface is - obtained from the device efuse mac address register + obtained from the device efuse mac address register. + If this is 2, the two DWORDs occupied by the MAC address + are swapped. The netcp driver will swap the two DWORDs + back to the proper order when this property is set to 2 + when it obtains the mac address from efuse. - local-mac-address: the driver is designed to use the of_get_mac_address api only if efuse-mac is 0. When efuse-mac is 0, the MAC address is obtained from local-mac-address. If this diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt new file mode 100644 index 000000000000..fb1e75facf1b --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt @@ -0,0 +1,27 @@ +* Samsung S3FWRN5 NCI NFC Controller + +Required properties: +- compatible: Should be "samsung,s3fwrn5-i2c". +- reg: address on the bus +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip +- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and + sleep/wakeup control + +Example: + +&hsi2c_4 { + status = "okay"; + s3fwrn5@27 { + compatible = "samsung,s3fwrn5-i2c"; + + reg = <0x27>; + + interrupt-parent = <&gpa1>; + interrupts = <3 0 0>; + + s3fwrn5,en-gpios = <&gpf1 4 0>; + s3fwrn5,fw-gpios = <&gpj0 2 0>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt index d707588ed734..d707588ed734 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt new file mode 100644 index 000000000000..525681b6dc39 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt @@ -0,0 +1,31 @@ +* STMicroelectronics SAS. ST NCI NFC Controller + +Required properties: +- compatible: Should be "st,st21nfcb-spi" +- spi-max-frequency: Maximum SPI frequency (<= 10000000). +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- reset-gpios: Output GPIO pin used to reset the ST21NFCB + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): + +&mcspi4 { + + status = "okay"; + + st21nfcb: st21nfcb@0 { + + compatible = "st,st21nfcb-spi"; + + clock-frequency = <4000000>; + + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + + reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt new file mode 100644 index 000000000000..51f8d2eba8d8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt @@ -0,0 +1,75 @@ +* Synopsys DWC Ethernet QoS IP version 4.10 driver (GMAC) + + +Required properties: +- compatible: Should be "snps,dwc-qos-ethernet-4.10" +- reg: Address and length of the register set for the device +- clocks: Phandles to the reference clock and the bus clock +- clock-names: Should be "phy_ref_clk" for the reference clock and "apb_pclk" + for the bus clock. +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the core's combined interrupt signal +- phy-mode: See ethernet.txt file in the same directory + +Optional properties: +- dma-coherent: Present if dma operations are coherent +- mac-address: See ethernet.txt in the same directory +- local-mac-address: See ethernet.txt in the same directory +- snps,en-lpi: If present it enables use of the AXI low-power interface +- snps,write-requests: Number of write requests that the AXI port can issue. + It depends on the SoC configuration. +- snps,read-requests: Number of read requests that the AXI port can issue. + It depends on the SoC configuration. +- snps,burst-map: Bitmap of allowed AXI burst lengts, with the LSB + representing 4, then 8 etc. +- snps,txpbl: DMA Programmable burst length for the TX DMA +- snps,rxpbl: DMA Programmable burst length for the RX DMA +- snps,en-tx-lpi-clockgating: Enable gating of the MAC TX clock during + TX low-power mode. +- phy-handle: See ethernet.txt file in the same directory +- mdio device tree subnode: When the GMAC has a phy connected to its local + mdio, there must be device tree subnode with the following + required properties: + - compatible: Must be "snps,dwc-qos-ethernet-mdio". + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. + + For each phy on the mdio bus, there must be a node with the following + fields: + + - reg: phy id used to communicate to phy. + - device_type: Must be "ethernet-phy". + - fixed-mode device tree subnode: see fixed-link.txt in the same directory + +Examples: +ethernet2@40010000 { + clock-names = "phy_ref_clk", "apb_pclk"; + clocks = <&clkc 17>, <&clkc 15>; + compatible = "snps,dwc-qos-ethernet-4.10"; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + reg = <0x40010000 0x4000>; + phy-handle = <&phy2>; + phy-mode = "gmii"; + + snps,en-tx-lpi-clockgating; + snps,en-lpi; + snps,write-requests = <2>; + snps,read-requests = <16>; + snps,burst-map = <0x7>; + snps,txpbl = <8>; + snps,rxpbl = <2>; + + dma-coherent; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + phy2: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x1>; + }; + }; +}; |