diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/ethernet.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/ethernet.txt | 8 |
1 files changed, 5 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index a68621580584..e88c3641d613 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -4,12 +4,14 @@ NOTE: All 'phy*' properties documented below are Ethernet specific. For the generic PHY 'phys' property, see Documentation/devicetree/bindings/phy/phy-bindings.txt. -- local-mac-address: array of 6 bytes, specifies the MAC address that was - assigned to the network device; - mac-address: array of 6 bytes, specifies the MAC address that was last used by the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the "local-mac-address" property; +- local-mac-address: array of 6 bytes, specifies the MAC address that was + assigned to the network device; +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in the Devicetree @@ -36,7 +38,7 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt. * "smii" * "xgmii" * "trgmii" - * "2000base-x", + * "1000base-x", * "2500base-x", * "rxaui" * "xaui" |