diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/adv7604.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/media/i2c/adv7604.txt | 21 |
1 files changed, 13 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt index c27cede3bd68..8337f75c75da 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt @@ -1,15 +1,17 @@ -* Analog Devices ADV7604/11 video decoder with HDMI receiver +* Analog Devices ADV7604/11/12 video decoder with HDMI receiver -The ADV7604 and ADV7611 are multiformat video decoders with an integrated HDMI -receiver. The ADV7604 has four multiplexed HDMI inputs and one analog input, -and the ADV7611 has one HDMI input and no analog input. +The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated +HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog +input, and the ADV7611 has one HDMI input and no analog input. The 7612 is +similar to the 7611 but has 2 HDMI inputs. -These device tree bindings support the ADV7611 only at the moment. +These device tree bindings support the ADV7611/12 only at the moment. Required Properties: - compatible: Must contain one of the following - "adi,adv7611" for the ADV7611 + - "adi,adv7612" for the ADV7612 - reg: I2C slave address @@ -22,10 +24,10 @@ port, in accordance with the video interface bindings defined in Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes are numbered as follows. - Port ADV7611 + Port ADV7611 ADV7612 ------------------------------------------------------------ - HDMI 0 - Digital output 1 + HDMI 0 0, 1 + Digital output 1 2 The digital output port node must contain at least one endpoint. @@ -45,6 +47,7 @@ Optional Endpoint Properties: If none of hsync-active, vsync-active and pclk-sample is specified the endpoint will use embedded BT.656 synchronization. + - default-input: Select which input is selected after reset. Example: @@ -58,6 +61,8 @@ Example: #address-cells = <1>; #size-cells = <0>; + default-input = <0>; + port@0 { reg = <0>; }; |