diff options
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 59 |
1 files changed, 50 insertions, 9 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 986e44387dad..15f79c27748d 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -531,7 +531,6 @@ [ACPI] acpi_pm [ARM] imx_timer1,OSTS,netx_timer,mpu_timer2, pxa_timer,timer3,32k_counter,timer0_1 - [AVR32] avr32 [X86-32] pit,hpet,tsc; scx200_hrt on Geode; cyclone on IBM x440 [MIPS] MIPS @@ -653,6 +652,9 @@ cpuidle.off=1 [CPU_IDLE] disable the cpuidle sub-system + cpufreq.off=1 [CPU_FREQ] + disable the cpufreq sub-system + cpu_init_udelay=N [X86] Delay for N microsec between assert and de-assert of APIC INIT to start processors. This delay occurs @@ -970,7 +972,7 @@ A valid base address must be provided, and the serial port must already be setup and configured. - armada3700_uart,<addr> + ar3700_uart,<addr> Start an early, polled-mode console on the Armada 3700 serial port at the specified address. The serial port must already be setup @@ -986,6 +988,7 @@ earlyprintk=ttySn[,baudrate] earlyprintk=dbgp[debugController#] earlyprintk=pciserial,bus:device.function[,baudrate] + earlyprintk=xdbc[xhciController#] earlyprintk is useful when the kernel crashes before the normal console is initialized. It is not enabled by @@ -1183,6 +1186,12 @@ functions that can be changed at run time by the set_graph_notrace file in the debugfs tracing directory. + ftrace_graph_max_depth=<uint> + [FTRACE] Used with the function graph tracer. This is + the max depth it will trace into a function. This value + can be changed at run time by the max_graph_depth file + in the tracefs tracing directory. default: 0 (no limit) + gamecon.map[2|3]= [HW,JOY] Multisystem joystick and NES/SNES/PSX pad support via parallel port (up to 5 devices per port) @@ -1569,6 +1578,15 @@ extended tables themselves, and also PASID support. With this option set, extended tables will not be used even on hardware which claims to support them. + tboot_noforce [Default Off] + Do not force the Intel IOMMU enabled under tboot. + By default, tboot will force Intel IOMMU on, which + could harm performance of some high-throughput + devices like 40GBit network cards, even if identity + mapping is enabled. + Note that using this option lowers the security + provided by tboot because it makes the system + vulnerable to DMA attacks. intel_idle.max_cstate= [KNL,HW,ACPI,X86] 0 disables intel_idle and fall back on acpi_idle. @@ -1635,6 +1653,12 @@ nobypass [PPC/POWERNV] Disable IOMMU bypass, using IOMMU for PCI devices. + iommu.passthrough= + [ARM64] Configure DMA to bypass the IOMMU by default. + Format: { "0" | "1" } + 0 - Use IOMMU translation for DMA. + 1 - Bypass the IOMMU for DMA. + unset - Use IOMMU translation for DMA. io7= [HW] IO7 for Marvel based alpha systems See comment before marvel_specify_io7 in @@ -1716,6 +1740,12 @@ kernel and module base offset ASLR (Address Space Layout Randomization). + kasan_multi_shot + [KNL] Enforce KASAN (Kernel Address Sanitizer) to print + report on every invalid memory access. Without this + parameter KASAN will print report only for the first + invalid access. + keepinitrd [HW,ARM] kernelcore= [KNL,X86,IA-64,PPC] @@ -2404,13 +2434,7 @@ and gids from such clients. This is intended to ease migration from NFSv2/v3. - objlayoutdriver.osd_login_prog= - [NFS] [OBJLAYOUT] sets the pathname to the program which - is used to automatically discover and login into new - osd-targets. Please see: - Documentation/filesystems/pnfs.txt for more explanations - - nmi_debug= [KNL,AVR32,SH] Specify one or more actions to take + nmi_debug= [KNL,SH] Specify one or more actions to take when a NMI is triggered. Format: [state][,regs][,debounce][,die] @@ -3163,6 +3187,12 @@ ramdisk_size= [RAM] Sizes of RAM disks in kilobytes See Documentation/blockdev/ramdisk.txt. + ras=option[,option,...] [KNL] RAS-specific options + + cec_disable [X86] + Disable the Correctable Errors Collector, + see CONFIG_RAS_CEC help text. + rcu_nocbs= [KNL] The argument is a cpu list, as described above. @@ -3764,6 +3794,14 @@ spia_pedr= spia_peddr= + srcutree.exp_holdoff [KNL] + Specifies how many nanoseconds must elapse + since the end of the last SRCU grace period for + a given srcu_struct until the next normal SRCU + grace period will be considered for automatic + expediting. Set to zero to disable automatic + expediting. + stacktrace [FTRACE] Enabled the stack tracer on boot up. @@ -4106,6 +4144,9 @@ usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. + usbhid.jspoll= + [USBHID] The interval which joysticks are to be polled at. + usb-storage.delay_use= [UMS] The delay in seconds before a new device is scanned for Logical Units (default 1). |